Oticon A S EBBTE01 mini BTE-EB User Manual Installation Guide

Oticon A/S mini BTE-EB Installation Guide

Installation Guide

PEOPLE FIRST OticonA/S  Kongebakken9  DK‐2765Smørum  www.oticon.comMain+4539177100 Fax+4539277900 DenmarkCVR‐no.42334219 1Oticon Radio Model - Quick Installation Guide Radio Model Name: mini BTE-EB The mini BTE-EB radio model is a low power, inductive radio transceiver working at 3.84 MHz consisting of an RF Engine Block (incl. DSP, radio & memory), antenna coil and a flex PCB motherboard (incl. small passive components). It is intended to be installed as a module into Oticon wireless hearing aid devices only. The module also has all voltage regulators included inside the engine block and a phone detection switch & push button on the motherboard. The module requires a battery, one or two microphones and a speaker to be attached and must be mounted in an external plastic shell. It is only possible for authorized personnel to program the module through a programming I/O-connector. The module is depicted to the right: mini BTE-EB Radio Model (seen from the top side) mini BTE-EB Radio Model (seen from the bottom)
PEOPLE FIRST OticonA/S  Kongebakken9  DK‐2765Smørum  www.oticon.comMain+4539177100 Fax+4539277900 DenmarkCVR‐no.42334219 2Oticon Radio Model - Quick Installation Guide Radio Model Name: mini BTE-EB Mini BTE-EB Radio Model (seen from the side) FCC ID: U28EBBTE01 IC: 1350B-EBBTE01 NOTICE: This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Navigation menu