Oticon A S FUNRI03 Hearing Aid Module User Manual

Oticon A/S Hearing Aid Module

User Manual

PEOPLE FIRST OticonA/S  Kongebakken9  DK‐2765Smørum  www.oticon.comMain+4539177100 Fax+4539277900 DenmarkCVR‐no.42334219 1Oticon Radio Model - Quick Installation Guide Radio Model Name: mini RITE The mini RITE radio model is a low power, inductive radio transceiver working at 3.84 MHz consisting of: • a Digital-Signal-Processor (DSP) • a radio Front-End (FE) • memory • antenna coil • and smaller components All components are mounted on a flexible Printed-Circuit-Board (PCB), which is intended to be installed as a module into Oticon wireless hearing aid devices only. The module also has all voltage regulators included inside the DSP and FE and buffered data programming inputs on the board. The module requires a battery, one or two microphones and an audio receiver to be attached and must be mounted in an external plastic shell. The module is depicted to the right with its main components and connections:
PEOPLE FIRST OticonA/S  Kongebakken9  DK‐2765Smørum  www.oticon.comMain+4539177100 Fax+4539277900 DenmarkCVR‐no.42334219 2Oticon Radio Model - Quick Installation Guide Radio Model Name: mini RITE FCC ID: U28FUNRI03 IC: 1350B-FUNRI03 NOTICE: This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Navigation menu