Oticon A S FUNRI03 Hearing Aid Module User Manual
Oticon A/S Hearing Aid Module
User Manual
PEOPLE FIRST
OticonA/S Kongebakken9 DK‐2765Smørum www.oticon.com
Main+4539177100 Fax+4539277900 DenmarkCVR‐no.42334219 1
Oticon Radio Model - Quick Installation Guide
Radio Model Name: mini RITE
The mini RITE radio model is a low power,
inductive radio transceiver working at 3.84 MHz
consisting of:
• a Digital-Signal-Processor (DSP)
• a radio Front-End (FE)
• memory
• antenna coil
• and smaller components
All components are mounted on a flexible Printed-
Circuit-Board (PCB), which is intended to be
installed as a module into Oticon wireless hearing
aid devices only.
The module also has all voltage regulators included
inside the DSP and FE and buffered data
programming inputs on the board.
The module requires a battery, one or two
microphones and an audio receiver to be attached
and must be mounted in an external plastic shell.
The module is depicted to the right with its main
components and connections:
PEOPLE FIRST
OticonA/S Kongebakken9 DK‐2765Smørum www.oticon.com
Main+4539177100 Fax+4539277900 DenmarkCVR‐no.42334219 2
Oticon Radio Model - Quick Installation Guide
Radio Model Name: mini RITE
FCC ID: U28FUNRI03 IC: 1350B-FUNRI03
NOTICE:
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.