OvisLink AP60 Wireless-N PoE Access Point AP60 User Manual AP60 QIG A4 SA 1 ai

Download:
Mirror Download [FCC.gov]
Document ID	1572233
Application ID	dtBE8EhkDuUXkF7j/jTfgw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	129.87kB (1623420 bits)
Date Submitted	2011-11-02 00:00:00
Date Available	2011-11-02 00:00:00
Creation Date	2017-11-03 13:29:58
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-11-03 13:29:58
Document Title	AP60-QIG-A4-SA-1.ai
Document Creator	Adobe Illustrator CS3
Document Author:	Terry

AirLive AP60-SA
Wireless-N PoE Access Point
Quick Setup Guide
Declaration of Conformity
We, Manufacturer/Importer
OvisLink Corp.
5F, No.6, Lane 130, Min-Chuan Rd., Hsin-Tien Dist.,
New Taipei City 231, Taiwan
Declare that the product
Wireless-N PoE Access Point
AirLive AP60-SA
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
This equipment has been tested and found to comply with the limits for a Class B&C
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
digital
device
pursuant
tooffPart
15
FCC Rules.
These
limits are
can be
determined
by turning
the equipment
and on,
the of
userthe
is encouraged
to try to correct
the interference
by onedesigned
of the followingto
measures:
FCC Statement
provide reasonable protection against harmful interferences when the equipment is
operating in a commercial area. This equipment generates, uses and may radiate radio
frequency energy, and if not installed in accordance with the user guide, may cause
interference in the transmission of radio communications. If operating in a residential
area, it is probable this equipment will cause harmful interference, in which case the
user will be required to try to correct this interference using his own means.
Manufacturer/Importer
Tested To Comply
With FCC Standards.
FOR HOME OR OFFICE USE
Signature：
Name：Albert Yeh
Position/ Title : Vice President
Place : Republic of China (Taiwan)
Date：2011/07/20
NoteBook
Barra de Idiomas
AP60
Assistente
Configuração
NoteBook
Neste modo, o AP irá actuar como um hub central
para a rede wireless.
PT
Português
Noticia Importante:
O modo wireless padrão é : modo "AP"
O endereço IP padrão é 192.168.100.252
Por defeito a subnet mask é 255.255.255.0
O nome utilizador padrão é: admin
A palavra-chave padrão é: airlive
O SSID padrão é: airlive
Certifique-se por favor de instalar a antena antes do power-on (ligar
à energia). Caso contrário, o rádio pode ser danificado.
Login Gestor Web para Configurar o AP60
1. Instale por favor a antena no AP60.
2 .Conecte o seu PC em qualquer porta LAN por cabo Ethernet.
3 .Conecte o power jack na porta power.
4 .Aguarde 1 minuto para o AP60 terminar o reboot.
5 .Por favor defina o endereço do seu PC para 192.168.100.x (ou outro
endereço dentro da mesma sub-rede)
6 .Digite o endereço IP do AP60 no explorador web para entrar no login
do Gestor Web.
Configurar o AP60 com o setup wizard
1. Login Gestor web e seleccione o idioma no topo da barra de idiomas.
(Figura A)
2. Clique em “Setup Wizard” em Wireless Settings. (Figura B)
3. Selecione Modo Wireless: O modo de operação por defeito é AP.
Quando o modo estiver seleccionado, à uma confirmação em baixo e à
esquerda da ilustração. Por favor escolha o modo e clique “Next”.
(Figura B)
4. Wireless Settings: Configure as Definições Wireless para recursos
avançados e clique “Next” depois de terminar.
5. WAN Settings: Configure as definições WAN, e seleccione o tipo WAN
de acordo com seu ISP. Se você não tiver a certeza qual o seu tipo
WAN, consulte por favor o seu ISP para obter mais informações. Note
por favor que a Porta WAN é apenas exibida nos modos WISP Router
e AP Router.
6. Quando as configurações estiverem finalizadas, clique “Finish” para
que as novas configurações tenham efeito.
Configure AP60 com IP Finder
Você pode encontrar o IP Finder através do CD fornecido e por favor
instale-o no seu computador. Depois, você pode usá-lo para encontrar o
AP-60 na sua rede. Por defeito o nome utilizador é admin, e a palavra
chave é airlive.(Figura C)
Para mais informações, leia por favor o manual de instruções no CD.
P1
AirLive AP60-SA
Wireless-N PoE Access Point
Quick Setup Guide
NoteBook
Barra de idiomas
AP60
Instalación
NoteBook
En este modo, el AP funciona como hub central
para la conexión de red inalámbrico
ES
Español
Noticia importante:
Configurar el AP60 usando la instalación wizard
Modo inalámbrico por default es : modo "AP"
Dirección IP por default es 192.168.100.252
Le masque de sous réseau par défaut est 255.255.255.0
Nombre de usuario por default es: admin
Contraseña por default es: airlive
SSID por default es: airlive
Favor de instalar la antena antes de encender la máquina, de lo
contrario se dañará el radio.
1. Login la administración de web y seleccionar el idioma en la borra de
idioma del lado izquierdo-arriba. (Figura A)
2. Hacer click en “Setup Wizard” en la configuración inalámbrica. (Figura
B)
3. Seleccionar el modo inalámbrico: El modo default es AP. Cuando el
modo esté seleccionado, aparecerá una ilustración en el lado
izquierdo-debajo. Elegir el modo y hacer click en “Next”. (Figura B)
4. Configuración inalámbrica: Configurar la configuración inalámbrica en
el modo avanzado y hacer click en “Next” para terminar.
5. Configuración WAN: Configurar el WAN y seleccionar tipo WAN según
el ISP. Si no está seguro del tipo de WAN, consultar en el ISP para
mayor información. Tener en cuenta que el puerto WAN solamente
aparece en los modos WISP Router y AP Router.
6. Cuando termine la configuración hacer click en “Finish” para tomar
efecto.
Login para la administración de web para configurar el AP60
1. Instalar la antena al AP60.
2. Conectar su PC a un puerto LAN por medio del cable Ethernet.
3. Conectar el conector de corriente al puerto de corriente.
4. Esperar unos minutos para que el AP60 reinicie.
5. Configurar el IP de la PC a 192.168.100.x (u otra dirección del mismo
subnet)
6. Tipear la dirección IP del AP60 en el buscador de web para entrar a la
administración de web.
Configurar el AP60 con el IP Finder
Encontrar el IP Finder en el CD e instalarlo en su computadora. Luego,
úsarlo para encontrar el AP-60 en su red. Nombre de usuario por default
es admin, contraseña es airlive.(Figura C)
Para mayor información, leer el manual de instrucciones en el CD.
NoteBook
Language Bar
AP60
Setup Wizard
NoteBook
In this mode, the AP will act as a center hub for the
wireless network.
EN
English
Default Settings:
Operation Mode: AP
IP: 192.168.100.252
Subnet mask: 255.255.255.0
Username: admin
Password: airlive
SSID: airlive
Please make sure to install the antenna first before power-on.
Otherwise, the radio might be damaged.
Login web management to configure AP60
1. Please install antenna into AP60.
2. Connect your PC to any LAN port by Ethernet cable.
3. Connect the power jack to the power port.
4. Wait for about 1 minute for AP60 to finish reboot.
5. Please set your PC’s IP address to 192.168.100.x (or other address in
the same subnet)
6. Type the AP60’s IP address into the web browser’s to login the Web
Management.
Configure AP60 with setup wizard
1. Login the web Management and select the language in the top of the
left pull-down language bar. (Picture A)
2. Click on “Setup Wizard” at Wireless Settings. (Picture B)
3. Select Wireless Mode: The default operation mode is AP. When mode
is selected, there is statement in the bottom of the left illustration.
Please choose mode and click “Next”. (Picture B)
4. Wireless Settings: Configure the Wireless Settings for advanced
feature and click “Next” after finish.
5. WAN Settings: Configure the WAN settings, and select the WAN type
according to your ISP. If you don’t sure what your WAN type, please
consult with your ISP for further information. Please note that WAN Port
is only displayed in WISP Router and AP Router modes.
6. When setup finished, click “Finish” for the new settings to take effect.
Configure AP60 with IP Finder
You can find the IP Finder from the supplied CD and please install it into
your computer. Then, you can use it to find the AP-60 at your network.
The default user name is admin, and the password is airlive.(Picture C)
For more information, please read the instruction manual on the CD.
P2
M73-OVL01-310

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : Terry
Create Date                     : 2011:08:30 17:53:49+08:00
Modify Date                     : 2011:10:31 18:16:46+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2011:10:31 18:16:46+08:00
Creator Tool                    : Adobe Illustrator CS3
Thumbnail Width                 : 184
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 18489 bytes, use -b option to extract)
Format                          : application/pdf
Title                           : AP60-QIG-A4-SA-1.ai
Creator                         : Terry
Document ID                     : uuid:5793abb6-ba19-47be-862e-b554f4cdd48f
Instance ID                     : uuid:57e49e56-4615-4092-bce9-1f792f376720
Producer                        : Acrobat Distiller 7.0.5 (Windows)
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : False
Max Page Size W                 : 209.980379
Max Page Size H                 : 297.038889
Max Page Size Unit              : Millimeters
Font Name                       : Arial-BoldMT, AvantGardeITCbyBT-MediumOblique, Arial-BoldItalicMT, ArialMT, Candara-Bold, Tahoma
Font Family                     : Arial, AvantGarde Md BT, Arial, Arial, Candara, Tahoma
Font Face                       : Bold, Medium Oblique, Bold Italic, Regular, Bold, Regular
Font Type                       : Open Type, TrueType, Open Type, Open Type, Open Type, Open Type
Font Version                    : Version 3.00, mfgpctt-v1.53 Friday, January 29, 1993 11:44:02 am (EST), Version 2.90, Version 3.00, Version 1.01, Version 3.15
Font Composite                  : False, False, False, False, False, False
Font File Name                  : ARIALBD.TTF, AVGARDMI.TTF, ARIALBI.TTF, ARIAL.TTF, CANDARAB.TTF, TAHOMA.TTF
Plate Names                     : Cyan, Magenta, Yellow, Black, PANTONE 8183 C
Swatch Group Name               : 預設色票群組
Swatch Group Type               : 0
Swatch Colorant Swatch Name     : PANTONE 8183 C
Swatch Colorant Type            : SPOT
Swatch Colorant Tint            : 100.000000
Swatch Colorant Mode            : CMYK
Swatch Colorant Cyan            : 82.352942
Swatch Colorant Magenta         : 65.098041
Swatch Colorant Yellow          : 29.803923
Swatch Colorant Black           : 0.000000
State                           : 1
Version                         : 1.1
Page Count                      : 2
For                             : ���}�r,
Bounding Box                    : 0 0 596 842
Container Version               : 11
Creator Version                 : 13
Image Height                    : 842
Image Width                     : 596
Image Size                      : 596x842
Megapixels                      : 0.502

EXIF Metadata provided by EXIF.tools