Ox Co IVS166 K-Band VCO Transceiver User Manual

Optex Co Ltd K-Band VCO Transceiver

User Manual

and manufactured in GermanydesignedInnovation in Radar TechnologyUser ManualCONFIDENTIAL AND PROPRIETARYThe information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing.Page 1 USER MANUAL IVS-166 Version 1.0 PRODUCT FAMILYAPPLICATIONSFEATURES:DESCRIPTIONADDITIONAL INFORMATIONInnoSenT Standard Product. Changes will not be notified as long as there is no influence on form, fit and within this datasheet specified function of the product. RoHS-INFOThis product is compliant to the restriction of hazardous substances (RoHS - European Union directive 2011/65/Eu).CERTIFICATESInnoSenT GmbH has established and applies a quality system for: development, production and sales of radar sensors for industrial and automotive sensors.VersionThe IVS-166 is the FMCW/FSK-version of the IPS-154. The same outline dimensions as well as the identical antenna pattern make this product perfect for upgrading existing systems1.0 - 03.12.2013 IVS-166K-Band VCO Transceiver• Industrial Applications• Door OpenerMovement Velocity Direction Presence Distance Angle »VCO-Transceiver centered @ 24GHz »FMCW/FSK capable; therefore measurement of distance as well as recognition of stationary objects possible (depending on modulation) »split transmit and receive path for maximum gain »stereo (dual channel) operation for direction of motion indection »IF-pre-amplifier, bandwith limited for lowest noise performance »compact outline dimensions
Innovation in Radar TechnologyCONFIDENTIAL AND PROPRIETARYThe information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing.Page 2 USER MANUAL IVS-166 Version 1.0 ELECTRICAL CHARACTERISTICSPARAMETER CONDITIONS SYMBOL MIN TYP MAX UNITSTransmittertransmit frequencies depending on Vtune f 24.000 - 24.250 GHzfreq @ Vtune 5,0V @ 25°C f5,0V 24.100 24.125 24.150 GHzvaractor tuning voltage Vtune 0.5 10 Vvaractor tuning impedance 10k kΩmodulation input 150 kHztuning slope 40 MHz/Vtemperature drift (frequency) Δf -1 MHz/°Coutput power (EIRP) @ 25°C Pout 15 dBmReceiverI/Q balance amplitude 6 dBphase 60 90 120 °IF-output voltage offset 1. 0 2.2 4.0 VIF - amplifier bandwidth DC - 50 kHzgain 20 dBAntenna System Pattern (compare with antenna plot on page 3)full beam width @ -3dB azimuth horizontal 45 °elevation vertical 38 °side-lobe suppression azimuth horizontal 15 dBelevation vertical 20 dBPower supplysupply voltage VCC 4.75 5.00 5.25 Vsupply current IF-amp included ICC 35 50 mAEnvironmentoperating temperature TOP -20 +60 °Cstorage temperature TSTG -40 +85 °CMechanical Outlinesoutline dimensions compare drawingheightlengthwidth8.3 (19)44.030.0mm
Innovation in Radar TechnologyCONFIDENTIAL AND PROPRIETARYThe information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing.Page 3 USER MANUAL IVS-166 Version 1.0 TX- ANTENNA PATTERNAntenna Orientation:PARAMETER CONDITIONS SYMBOL MIN TYP MAX UNITSfull beam width @ -3dB horizontal 45 °vertical 38 °side-lobe suppression horizontal 15 dBvertical 20 dBhorizontalvercalantennaangle [°]output power [dBm]-40-35-30-25-20-15-10-50-180,0 -150,0 -120,0 -90,0 -60,0 -30,0 0,0 30,0 60,0 90,0 120,0 150,0 180,0
Innovation in Radar TechnologyCONFIDENTIAL AND PROPRIETARYThe information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing.Page 4 USER MANUAL IVS-166 Version 1.0 PIN # DESCRIPTION IN / OUT COMMENT1 Vtune input varactor tuning voltage2 enable input active low3 Vcc input supply voltage (+5 V)4 GND input analog ground5 IF1 output signal I(nphase)6 IF2 output signal Q(uadrature)7 GND input analog ground8 GND input analog ground9 NC not connected10 NC not connectedINTERFACEThe sensor provides a 2.54mm grid, single row pin header (square pin 0.635mm).MECHANICAL OUTLINESside viewbottom viewtop view304x2.544435.44.340.5backside6x2.5426.6PIN11916all dimensions in mmantenna7.60.7PIN1PIN10PIN10
Innovation in Radar TechnologyCONFIDENTIAL AND PROPRIETARYThe information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing.Page 5 USER MANUAL IVS-166 Version 1.0 NOTICE:This device complies with Part 15 of the FCC Rules [and with Industry Canada licence-exempt RSS standard(s)].Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radioexempts de licence. L’exploitation est autorisée aux deux conditions suivantes:(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.NOTICE:Changes or modications made to this equipment not expressly approved by (manufacturer name) may void the FCC authorization to operate this equipment.Text for User Manual (blue cursive text)For a Class A digital device or peripheral, the instructions furnished the user shall include the following or similar state-ment, placed in a prominent location in the text of the manual:NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equip-ment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio commu-nications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Innovation in Radar TechnologyCONFIDENTIAL AND PROPRIETARYThe information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing.Page 6 USER MANUAL IVS-166 Version 1.0 FCC approvalChanges or modifications made to the equipment not expressly approved by InnoSenT GmbH may void the FCC / IC authorization to operate this equipment.The use of the transceiver module is authorized in mobile or fixed host devices taking into account the conditions listed below:•OEMIntegratormustensurethattheendusermanualmaynotcontainanyinformationaboutthewaytoinstall or remove the module from the final product.•Dependingonthenalhostdeviceadditionalauthorizationrequirementsforthenon-transmitterfunctionsof the transmitter module may be required (i.e., Verification, or Declaration of Conformity) The OEM integ-rator is responsible for ensuring that after the module is installed and operational the host continues to be compliant with the Part 15B unintentional radiator requirements.•Theinformationonthelabelandintheusermanualisrequiredtobeincorporatedintheusermanualofthe final host. see 47 CFR15 requirements for more details (e.g. 15.19 / 15.21 / 15.101 / 15.105 / RSS-GEN / ICES)•Additionallabelwiththewords‘ContainsFCCID:DC9-IVS166’and‘ContainsIC:4012A-IVS166’shallbeapplied and visible from the outside of the host product.•Themodulemustbeinstalledandusedinstrictaccordancewiththemanufacturer’sinstructionsasde-scribed in the user documentation that comes with the module.•Theendusermanualforthenalhostproductoperatingwiththistransmittermustincludeoperatinginstructions to satisfy RF exposure compliance requirements.e.gRadiofrequency radiation exposure Information:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equip-ment should be installed and operated with minimum distance of 20 cm between the radiator and your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.•Theantennaofthemodulemaynotberemoved,replacednormodied.Theantennamustnotbeco-loca-ted or operating in conjunction with any other antenna or transmitter. No additional antenna must be used.•Whenthenalhostproductoperatingwiththistransmitterdeviatefromabove,installationofthismoduleinto specific final hosts may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.
Innovation in Radar TechnologyPage 7 USER MANUAL IVS-166 Version 1.0 InnoSenT GmbHAm Rödertor 3097499 DonnersdorfGERMANYTel.:E-Mail:URL:+49 (0) 9528 - 9518 - 0info@innosent.dewww.innosent.deVERSION DATE COMMENT1. 0 03.12.2013 Creating user manual IVS-166APPROVALThis Data Sheet contains the technical specifications of the described product. All previous versions of this Data Sheet are no longer valid.The sensor uses Hydrocarbon based material which may change its dielectric properties when used in an oxidati-ve environment. This may vary based on temperature. Therefore InnoSenT recommends evaluating this influence within the specific environment.

Navigation menu