Ox Co RC-20U CHIME BOX WITH RELAY RECEIVER User Manual RC 20U IM p1 Black A4 150110r
Optex Co Ltd CHIME BOX WITH RELAY RECEIVER RC 20U IM p1 Black A4 150110r
Ox Co >
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1261846 |
| Application ID | YlEzO/sanNPsbZY1rrIheA== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 169.14kB (2114302 bits) |
| Date Submitted | 2010-04-06 00:00:00 |
| Date Available | 2010-04-06 00:00:00 |
| Creation Date | 2010-01-19 16:14:47 |
| Producing Software | Adobe PDF library 9.00 |
| Document Lastmod | 2010-04-02 12:52:08 |
| Document Title | RC-20U-IM_p1_(Black A4)150110r |
| Document Creator | Adobe Illustrator CS4 |
FEATURES 2000 ・Compatible with TD-20U (Indoor/Outdoor Sensor Transmitter),TS-10U (Hand-Held Transmitter), TR-20U(Repeater), TC-10U(Door/Window Transmitter) and any transmission units of WIRELESS1000 series. ・Identifies 4 zones by 3 different tones and LED lights (3 normal zones + 1 continuous zone). ・Able to learn 12 transmission codes (Each zone can learn 3 transmitters maximum). ・Automatic “Learning” function facilitates to preset transmission codes to RC-20U. ・Over 8 million codes possible, eliminates interference from neighbors. ・Latches into alarm with “Continuous mode” function. ・Programmed ”Utility Output Mode” to inactivate chime tone (applicable for zone 3). ・Adjustable duration for terminal output. ・Adjustable volume. ・Low battery indicator to recognize transmission units’ battery status. ・Powered by a 9VDC adaptor(Included). CHIME BOX W/RELAY RECEIVER RC-20U INSTALLATION INSTRUCTIONS Please read this manual carefully before installation. 1 CAUTION AND WARNING WARNING 1. Harsh environments Do not use the RC-20U outdoors, severe conditions as out of warranted temperature, rapid temperature change, high humidity, or steam. This may cause the unit to malfunction. 2. Tampering Any changes or modifications not expressly approved by OPTEX could void the user’s authority to operate the equipment. 3. Adaptor Do not use any other AC adaptor except what is included. CAUTION 1. Impact/Shock Impact or Shock can cause severe damage or break the RC-20U. 2. Electric Devices Use RC-20U at least 3ft (1m) away from electronic devices such as TVs, Radios, PCs, Microwave ovens, or any other devices with an electric motors. This may cause the unit to malfunction. 3. Transmission range Transmission range may decrease under the following conditions: - Either transmission units or RC-20U installed on a metal surface. - Presence of a steel door, reinforced concrete or other metal obstructions between transmission units and RC-20U. - Places near strong radio sources such as broadcast stations or substation. 4. Cleaning Harsh cleaners such as paint removers or benzene may ruin the surface. Use a soft wet cloth and mild soap to clean. 3 TRANSMISSION RANGE (REFERENCE) 2 PARTS IDENTIFICATION Function Zone indicator 1 Zone indicator 2 Zone indicator 3 Switch 1 Power indicator Power Switch Switch 2 Speaker Adaptor Jack FRONT Activating “LEARN MODE” and Switch 1 “TERMINAL OUTPUT DURATION Mounting hole MODE”. Activating “VOLUME ADJUSTMENT Switch 2 MODE” and making selection. Sensor unit TD-20U Connection terminal cover Output connection terminal (Inside of the cover) Transmission range must be changed according to environment. Please check if system works properly for the site. In the case of insufficient transmission range, use TR-20U (Repeater unit) to extend its range. 2000ft (Open field, line of sight) 150ft (Stucco/Plaster construction) 100ft (Concrete construction) Repeater TR-20U Stand BACK Note: When you recycle this product, please disassemble product and recycle according to state law. AC Adaptor Contact unit TC-10U Mounting screw Button unit TS-10U 1400ft (Open field, line of sight) 150ft (Stucco/Plaster construction) 100ft (Concrete construction) Receiver/ Repeater RC-20U/ TR-20U 4 INSTALLATION 5 POWER CONNECTION Wall Mounting Use only the power adaptor supplied with the product. Desktop Use the mounting screw on a wall. Leave some length of the screw out for mounting hole of the RC-20U. Pull out the stand on the back of the RC-20U and place it on any flat surface. Terminal connection Any device with a zero voltage input terminal can be connected to this terminal. This may include electronic locks, emergency sounding devices, and automatic reporting equipment. Remove the connection terminal cover. Use the terminal marked Remove knockouts “COM-N.O.” for N.O. according to wiring devices and “COM-N.C.” for needs. N.C. devices. Close the connection terminal cover. 6 TEACH TRANSMITTER CODES TO RC-20U “LEARN MODE” Each transmitter has a unique transmitter code which can be automatically learned by RC-20U. The RC-20U’s zones must be taught to respond to the appropriate transmitter. (No transmitter is taught on default setting.) Teach the transmitter code to RC-20U Activate the transmitter you wish to teach the receiver. A) The RC-20U automatically starts in “LEARN MODE” if no transmitter code has been programmed. OR B) Press and hold switch 1 until the power indicator starts to flash. corresponding zone indicator flash rapidly at interval’s of ( The 1 sec according to the related transmitter. Zone 1 Zone 2 Zone 3 Activate “LEARN MODE” Zone 4 (Special/ refer 8 ) Normal Operation Status Light Blink Receiver starts in Zone 1. Press switch 2 to advance to the next zone and chime sound. Note: ・Verify that each transmitter has been successfully learned by RC-20U by triggering them. ・Each zone can learn max. 3 transmitters. ・Zone indicator shows the activated transmitter by the number of flash. (e.g. If learned second transmitter in zone 1 is activated, zone 1 indicator flashes twice.) ・Single transmitter cannot be learned by multiple zones ・RC-20U learned code will keep memorized even if turning OFF the power. Press switch 2 to return to normal operation status. Erasing codes from RC-20U’s memory. 1) Hold down switch 1 until the power indicator starts to flash. 2) Press switch 2 until the appropriate zone indicator is lit. 3) Press switch 1 to erase. The zone indicator will start to flash. (Note: All programming in that particular zone will be erased.) 4) Press switch 2 a few times until the power indicator stops flashing and remains lit. Erasing all codes from RC-20U. (Return to the factory default) To erase all programming, turn on power while holding switch 1. 7 VOLUME ADJUSTMENT This adjustment is applicable for zone 1 to 3 as a group and zone 4 independently. There are volume setting from Level 0 to 4. (Default setting for zone 1-3 is level 3, for zone 4 is level 4.) RC-20U will automatically return to normal operation status after 5 seconds without any operation. (Zone indicators will go OFF and power indicator will remain lit.) Press switch 2 to change volume level (Level 4 is the loudest.) Level 0 Level 1 Level 2 Level 3 Level 4 Press switch 2 for 1 time to activate “VOLUME ADJUSTMENT MODE” for zone 1-3 or hold switch 2 for 5 seconds for zone 4. (Power indicator goes OFF and zone indicators display the current setting). Normal Operation Status Louder 8 TERMINAL OUTPUT DURATION ADJUSTMENT 2 modes can be set according to the application. Regular mode Zone 1 Zone 2 Zone 3 Zone 4 Utility Output mode Chime tone 1 Terminal output Chime tone 2 (Time duration according to setting) Chime tone 3 Continuous tone and terminal output (Latches until switch 2 is presses to inactivate.) Zone 1 Zone 2 Zone 3 Zone 4 Note: Time of the chime will not change according to terminal output duration adjustment. Chime tone 1 No terminal output Chime tone 2 Terminal output for only 5 sec. No chime Continuous tone and terminal output (Latches until switch 2 is presses to inactivate.) Note: Time of the chime will not change according to terminal output duration adjustment. RC-20U will automatically return to normal operation status after 5 seconds without any operation. (Zone indicators will go OFF and power indicator will remain lit.) Normal Operation Status Press switch 2 to change duration time and setting. NO OUTPUT 1 SEC. 5 SEC. 30 SEC. 60 SEC. UTILITY OUTPUT MODE Press switch 1 twice within 2 seconds to activate “ TERMINAL OUTPUT DURATION MODE” (zone indicators display the current setting). 10 LOW BATTERY INDICATION 1. The system is not operating Does the status indicator light up when you trigger the transmitter? Is the status indicator of the transmitter flashing? Zone indicator start slow flashing and sound a chime followed by 2 beeps whenever the corresponding transmitters have low battery. Any operation cannot be done until one of operations below are conducted. 1) Replace transmitter’s batteries. 2) Press switch 2. RC-20U will not need to relearn transmitter after replacing the batteries. Note: Check low battery status at the corresponding transmitter in case several units are learned in 1 channel. Check to see whether the battery is inserted correctly. If the battery is old, replace it with a new one. The battery is old. Replace the battery. Check the receiver. Is the power indicator of the RC-20U lit? Have all the transmitter codes have been taught correctly? Is the volume setting correct? Are there other high power appliances using the same electrical power outlet? The zone indicator of the RC-20U is on, but nothing happens. Is the receiver on? Check the wiring and connection. Teach the transmitter codes correctly. The system will not operate without this process. Is there anything blocking the transmission? Is the volume set to “0”? If so, readjust the volume. Please connect the RC-20U to a different electrical outlet. Check to see whether the terminal is properly connected to other devices. Relocate the receiver and/or the RC-20U. Metal objects can shorten the effective transmission range. Are the zone indicators flashing slowly? Follow directions in 10 LOW BATTERY INDICATION. 2. The system is not operating correctly. The RC-20U does not learn the transmitter codes. The RC-20U gets reception in the wrong zone. The RC-20U does not respond to some of the transmitters. A certain zone seem to malfunction. Before contacting the supplier! Check whether the transmitter codes have already been learned in a different zone. If so, erase the memory and teach again. Erase memory in the zone in which the RC-20U responds and teach using the correct zone. You may have taught multiple transmitter codes in the same zone. Teach the transmitter codes for which no response is received using an empty zone. This is probably the transmitter’s problem. Check the transmitter that corresponds to that zone. Go through the setups again after turning on the power while holding down switch 1. • If the above solutions do not work, please contact your supplier for services. 13 COMPLIANCE FCC ID : DC9RC-20U The changes or modifications not expressly approved by the OPTEX could void the user’s authority to operate the equipment. To comply with the FCC RF exposure compliance requirements, this device and its antenna must not be co-located or operating to conjunction with any other antenna or transmitter.Note: This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication. However, there is no grantee that interference will not occur in a particular installation. If this equipment dose cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.(1)Reorient or relocate the receiving antenna. (2)Increase the separation between the equipment and receiver.(3)Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.(4)Consult the dealer or an experienced radio/TV technician for help. 11 SPECIFICATION Model RC-20U Description Chime Box w/Relay Receiver Power Source 9VDC (Exclusive AC Adaptor) Power Consumption 8W Max. (Including AC Adaptor 120V, 60Hz) Chime Tone 3 Tone & Continue Zone (Selectable) Volume Relay output Output Timer Status Indicator 12 DIMENSIONS Unit: inches (mm) 7.4 (188) Check the transmitter. Adjustable: 0~80dB/ 5 levels Form “C” MAX 1A/50VAC 24VDC Selectable: Off/1/5/30/60sec/ Utility output mode Power Indicator: Green Zone Indicator: Red x 3 418MHz 15° F ~ 105° F (-10°C ~ +40°C) Frequency Operating Temperature Installation Location Indoor Weight 6.0 oz (170g) Accessories Mounting Screw × 1. AC Adaptor 5.3 (134) 9 TROUBLESHOOTING 3.5 (88) 1.1 (28) Specifications may change without notice 14 WARRANTY 1. This product is warranted under normal use for 2 years from the date of purchase. If the product proves to be defective, return it with a copy of your dated sales receipt for repairs or replacement without charge. 2. The warranty is not applicable when below circumstances will be found: • Mechanical or electrical modification(s) are made to the product or it is otherwise altered manually. • The product is already been serviced at place(s) other than the manufacturer. • It is determined that the product malfunction has resulted from improper use or from an accident. • No copy of the dated sales receipt has been submitted together with the product to be serviced. IC ID : 4012A-000000TD20U Operation is subject to the following two conditions.(1)this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication. 5916470
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print Create Date : 2010:01:19 16:14:47+08:00 Creator : Adobe Illustrator CS4 Modify Date : 2010:04:02 12:52:08+08:00 XMP Toolkit : Adobe XMP Core 4.2.2-c063 53.351735, 2008/07/22-18:11:12 Format : application/pdf Title : RC-20U-IM_p1_(Black A4)150110r Metadata Date : 2010:01:19 16:14:48+08:00 Creator Tool : Adobe Illustrator CS4 Thumbnail Width : 184 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 23900 bytes, use -b option to extract) Instance ID : uuid:fc22ad04-4107-4a1f-9e46-2a2851bf823e Document ID : xmp.did:32A7683FCF04DF11A7B1C0E82677AF85 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:9412f2fb-7b32-4832-b8cb-3704b171d9a8 Derived From Document ID : xmp.did:30A7683FCF04DF11A7B1C0E82677AF85 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : converted, saved, converted, converted, saved, saved, saved, saved, saved, converted, saved, converted, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, converted, saved, converted, saved, converted, saved, converted, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Params : from application/pdf toEXIF Metadata provided by EXIF.toolsHistory Instance ID : xmp.iid:D27F11740720681191099C3B601C4548, xmp.iid:F97F1174072068118D4ED246B3ADB1C6, xmp.iid:FA7F1174072068118D4ED246B3ADB1C6, xmp.iid:EF7F117407206811A46CA4519D24356B, xmp.iid:F07F117407206811A46CA4519D24356B, xmp.iid:F77F117407206811BDDDFD38D0CF24DD, xmp.iid:F97F117407206811BDDDFD38D0CF24DD, xmp.iid:FA7F117407206811BDDDFD38D0CF24DD, xmp.iid:FB7F117407206811BDDDFD38D0CF24DD, xmp.iid:FC7F117407206811BDDDFD38D0CF24DD, xmp.iid:FD7F117407206811BDDDFD38D0CF24DD, xmp.iid:FE7F117407206811BDDDFD38D0CF24DD, xmp.iid:B233668C16206811BDDDFD38D0CF24DD, xmp.iid:B333668C16206811BDDDFD38D0CF24DD, xmp.iid:B433668C16206811BDDDFD38D0CF24DD, xmp.iid:F77F11740720681197C1BF14D1759E83, xmp.iid:F87F11740720681197C1BF14D1759E83, xmp.iid:F97F11740720681197C1BF14D1759E83, xmp.iid:FA7F117407206811B628E3BF27C8C41B, xmp.iid:FF7F117407206811B628E3BF27C8C41B, xmp.iid:07C3BD25102DDD1181B594070CEB88D9, xmp.iid:F87F1174072068119098B097FDA39BEF, xmp.iid:F77F117407206811BB1DBF8F242B6F84, xmp.iid:F97F117407206811ACAFB8DA80854E76, xmp.iid:0180117407206811834383CD3A8D2303, xmp.iid:01E540664A3DDD11BD33D3EB8D3A1068, xmp.iid:6B6AE2A5723EDD11A6F1BABF7C5A7A51, xmp.iid:B2E1B26CCEABDE1189ED8FA7F65F00F8, xmp.iid:494AAF186DDADE118B88D8628D747FD0, xmp.iid:4C4AAF186DDADE118B88D8628D747FD0, xmp.iid:F36F8FF249DDDE11B840F5DCA9E200CC, xmp.iid:1C7F027790DDDE11939B972993D75C25, xmp.iid:E801F459B1DFDE119FBF876FF253AAE1, xmp.iid:212D381A5BF3DE11A7C090C4B7531DA2, xmp.iid:242D381A5BF3DE11A7C090C4B7531DA2, xmp.iid:851619DF8EF3DE11A7C090C4B7531DA2, xmp.iid:3899D5550001DF11B9D4857D2FC85FEC, xmp.iid:30A7683FCF04DF11A7B1C0E82677AF85, xmp.iid:32A7683FCF04DF11A7B1C0E82677AF85 History When : 2008:04:17 14:19:15+05:30, 2008:05:15 16:23:06-07:00, 2008:05:15 17:10:45-07:00, 2008:05:15 22:53:33-07:00, 2008:05:15 23:07:07-07:00, 2008:05:16 10:35:43-07:00, 2008:05:16 10:40:59-07:00, 2008:05:16 11:26:55-07:00, 2008:05:16 11:29:01-07:00, 2008:05:16 11:29:20-07:00, 2008:05:16 11:30:54-07:00, 2008:05:16 11:31:22-07:00, 2008:05:16 12:23:46-07:00, 2008:05:16 13:27:54-07:00, 2008:05:16 13:46:13-07:00, 2008:05:16 15:47:57-07:00, 2008:05:16 15:51:06-07:00, 2008:05:16 15:52:22-07:00, 2008:05:22 13:28:01-07:00, 2008:05:22 16:23:53-07:00, 2008:05:28 16:45:26-07:00, 2008:06:02 13:25:25-07:00, 2008:06:09 14:58:36-07:00, 2008:06:11 14:31:27-07:00, 2008:06:11 22:37:35-07:00, 2008:06:18 22:24:01+07:00, 2008:06:19 20:30:34-07:00, 2009:09:28 11:35:45+08:00, 2009:11:26 17:21:36+08:00, 2009:11:26 18:03:45+08:00, 2009:11:30 08:47:33+08:00, 2009:11:30 17:43:25+08:00, 2009:12:03 19:57+08:00, 2009:12:28 14:06:26+08:00, 2009:12:28 16:33:23+08:00, 2009:12:28 17:04:42+08:00, 2010:01:15 10:23:15+08:00, 2010:01:19 15:55:20+08:00, 2010:01:19 16:14:42+08:00 History Software Agent : Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4 History Changed : /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, / Startup Profile : Print Has Visible Overprint : True Has Visible Transparency : False N Pages : 1 Max Page Size W : 210.001652 Max Page Size H : 296.999959 Max Page Size Unit : Millimeters Font Name : ArialNarrow-Bold, ArialNarrow, Arial-BoldMT, KozGoPro-Regular Font Family : Arial Narrow, Arial Narrow, Arial, 小塚ゴシック Pro Font Face : Bold, Regular, Bold, R Font Type : Open Type, Open Type, Open Type, Open Type Font Version : Version 2.30, Version 2.30, Version 3.00, Version 4.001;PS 4;Core 1.0.38;makeotf.lib1.7.12746 Font Composite : False, False, False, False Font File Name : ARIALNB.TTF, ARIALN.TTF, ARIALBD.TTF, KozGoPro-Regular.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Group Name : Default Swatch Group, Grays, Brights Swatch Group Type : 0, 1, 1 Swatch Colorant Swatch Name : White, Black, CMYK Red, CMYK Yellow, CMYK Green, CMYK Cyan, CMYK Blue, CMYK Magenta, C=15 M=100 Y=90 K=10, C=0 M=90 Y=85 K=0, C=0 M=80 Y=95 K=0, C=0 M=50 Y=100 K=0, C=0 M=35 Y=85 K=0, C=5 M=0 Y=90 K=0, C=20 M=0 Y=100 K=0, C=50 M=0 Y=100 K=0, C=75 M=0 Y=100 K=0, C=85 M=10 Y=100 K=10, C=90 M=30 Y=95 K=30, C=75 M=0 Y=75 K=0, C=80 M=10 Y=45 K=0, C=70 M=15 Y=0 K=0, C=85 M=50 Y=0 K=0, C=100 M=95 Y=5 K=0, C=100 M=100 Y=25 K=25, C=75 M=100 Y=0 K=0, C=50 M=100 Y=0 K=0, C=35 M=100 Y=35 K=10, C=10 M=100 Y=50 K=0, C=0 M=95 Y=20 K=0, C=25 M=25 Y=40 K=0, C=40 M=45 Y=50 K=5, C=50 M=50 Y=60 K=25, C=55 M=60 Y=65 K=40, C=25 M=40 Y=65 K=0, C=30 M=50 Y=75 K=10, C=35 M=60 Y=80 K=25, C=40 M=65 Y=90 K=35, C=40 M=70 Y=100 K=50, C=50 M=70 Y=80 K=70, AutoCAD Color, C=0 M=0 Y=0 K=100, C=0 M=0 Y=0 K=90, C=0 M=0 Y=0 K=80, C=0 M=0 Y=0 K=70, C=0 M=0 Y=0 K=60, C=0 M=0 Y=0 K=50, C=0 M=0 Y=0 K=40, C=0 M=0 Y=0 K=30, C=0 M=0 Y=0 K=20, C=0 M=0 Y=0 K=10, C=0 M=0 Y=0 K=5, C=0 M=100 Y=100 K=0, C=0 M=75 Y=100 K=0, C=0 M=10 Y=95 K=0, C=85 M=10 Y=100 K=0, C=100 M=90 Y=0 K=0, C=60 M=90 Y=0 K=0 Swatch Colorant Mode : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK Swatch Colorant Type : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS Swatch Colorant Cyan : 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 14.999998, 0.000000, 0.000000, 0.000000, 0.000000, 5.000001, 19.999999, 50.000000, 75.000000, 84.999996, 90.000004, 75.000000, 80.000001, 69.999999, 84.999996, 100.000000, 100.000000, 75.000000, 50.000000, 35.000002, 10.000002, 0.000000, 25.000000, 39.999998, 50.000000, 55.000001, 25.000000, 30.000001, 35.000002, 39.999998, 39.999998, 50.000000, 86.007500, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 84.999996, 100.000000, 60.000002 Swatch Colorant Magenta : 0.000000, 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 90.000004, 80.000001, 50.000000, 35.000002, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 30.000001, 0.000000, 10.000002, 14.999998, 50.000000, 94.999999, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 94.999999, 25.000000, 44.999999, 50.000000, 60.000002, 39.999998, 50.000000, 60.000002, 64.999998, 69.999999, 69.999999, 84.969902, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 10.000002, 10.000002, 90.000004, 90.000004 Swatch Colorant Yellow : 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 0.000000, 0.000000, 90.000004, 84.999996, 94.999999, 100.000000, 84.999996, 90.000004, 100.000000, 100.000000, 100.000000, 100.000000, 94.999999, 75.000000, 44.999999, 0.000000, 0.000000, 5.000001, 25.000000, 0.000000, 0.000000, 35.000002, 50.000000, 19.999999, 39.999998, 50.000000, 60.000002, 64.999998, 64.999998, 75.000000, 80.000001, 90.000004, 100.000000, 80.000001, 78.954798, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 94.999999, 100.000000, 0.000000, 0.003099 Swatch Colorant Black : 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 30.000001, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 25.000000, 0.000000, 0.000000, 10.000002, 0.000000, 0.000000, 0.000000, 5.000001, 25.000000, 39.999998, 0.000000, 10.000002, 25.000000, 35.000002, 50.000000, 69.999999, 100.000000, 100.000000, 89.999402, 79.998797, 69.999701, 59.999102, 50.000000, 39.999402, 29.998803, 19.999701, 9.999102, 4.998803, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.003099 Swatch Colorant Tint : 100.000000 Producer : Adobe PDF library 9.00 Page Count : 2 For : User, Bounding Box : 15 15 585 821 Container Version : 11 Creator Version : 14 Image Height : 806 Image Width : 570 Image Size : 570x806 Megapixels : 0.459