PAPAGO GOSAFEWIFI Driving Recorder User Manual zqcs3

PAPAGO INC. Driving Recorder zqcs3

UserMan

Download: PAPAGO GOSAFEWIFI Driving Recorder User Manual  zqcs3
Mirror Download [FCC.gov]PAPAGO GOSAFEWIFI Driving Recorder User Manual  zqcs3
Document ID2106913
Application ID0P62MNivR3b88FpOByb9fw==
Document DescriptionUserMan
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize261.18kB (3264779 bits)
Date Submitted2013-10-31 00:00:00
Date Available2013-11-05 00:00:00
Creation Date2013-10-22 11:34:47
Producing SoftwarePDF Printer / www.bullzip.com / CP / Freeware Edition
Document Lastmod2013-10-24 09:37:32
Document TitleUser Manual-zqcs3.pdf
Document CreatorUnknownApplication
Document Author: TBChen

Driving Recorder - GoSafe WiFi
Version: 1.7
15July 2013
1.1 Key Features
Video Formats Support 1080p30
Auto Recording once Engine Start
Support Cycle Recording
Emergency File Protection by Hand or G-Sensor
Low Luminance 2.4 mega Pixels Image Sensor
Built-in G-Sensor
Built-in WiFi
Control with your smartphone
1.2 Specifications
Items
Model
Main Chip
LCD
Image Sensor
DRAM
Internal Memory
Operating system
External Memory
Power Supply
Super capacitor
Power Consumption
White Balance
Exposure Control
Microphone
Date/Time (RTC)
Speaker
G-Sensor
GPS
Wifi/GPRS
Interface
Button
LED indicator
Operation Temperature
Storage Temperature
Engine Dimensions (LxWxH)
Weight
Package Contents
Accessories (Option)
Certification
View Angle
Lens
Specification
GoSafe WiFi
Ambarella A5s66
N/A
1/2.8” 2.4 mega-pixel CMOS ( Sony IMX122)
128Mx16bit(2Gb) DDR III
128M x 8bit (1Gb) NAND Flash
Linux
Micro SDHC Card Slot
5V 1A USB Power
A. 2 Super Capacitors use to supply temporary power to ensure proper shut
down when power is cut off
B. To timing recording, keep going at least 7 days when power off
4.75V~5.25V / 1A at maximum power output mode
5V/ 5000 μA at power-off mode
Auto
Auto
Yes
Yes
1W x1
Yes
None
SDIO Interface (Atheros 6103), Wireless 802.11 b/g/n
Mini USB 2.0 with 10pin(Mass storage / power in / plug in gps)
Micro SD slot, Mini HDMI
Power / EMG REC / Wifi switch
REC / Wifi
-20~70℃
-40~85℃
MAX: 43 (L) x 40 (W) x 40 (H) mm
58g
Mini USB Car Charger, Bracket, Removable cradle, User Guide, Resource CD,
Warranty Card
Battery Pack, Waterproof Housing
BSMI/CE/FCC/NCC /Wifi Alliance
Wide angle lens FOV 100° (H)
F#1.9
Page 1
Confidential
FCC Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
CAUTION: Change or modification not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
--Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could
void the user's authority to operate the equipment.
RF exposure warning
This equipment must be installed and operated in accordance with provided instructions
and the antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter. End-users and installers must be
provide with antenna installation instructions and transmitter operating conditions for
satisfying RF exposure compliance."

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : TBChen
Create Date                     : 2013:10:22 11:34:47+08:00
Modify Date                     : 2013:10:24 09:37:32+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Producer                        : PDF Printer / www.bullzip.com / CP / Freeware Edition
Creator Tool                    : UnknownApplication
Metadata Date                   : 2013:10:24 09:37:32+08:00
Document ID                     : uuid:66017080-3d26-11e3-0000-df38641b64d6
Instance ID                     : uuid:2ce6bd40-b4c1-42aa-bb59-142c7fa6648e
Format                          : application/pdf
Title                           : User Manual-zqcs3.pdf
Creator                         : TBChen
Page Count                      : 14
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AA58GOSAFEWIFI

Navigation menu