PARKEON STRADA-RAPIDE PAY & PLAY MACHINE WITH WI-FI User Manual Wifi kit user s manual
PARKEON PAY & PLAY MACHINE WITH WI-FI Wifi kit user s manual
PARKEON >
Contents
- 1. users manual 1
- 2. users manual 2
users manual 2
Wifi kit Neops base terminals Operation manual MKL 05/018 Original edition in French (ref. MKL 05/019) Translated into English in February 2006. Copyright 2006 Parkeon. All rights reserved. Parkeon reserves all proprietary rights relating to the contents of this document. Parkeon reserves all rights over usage, reproduction, representation, marketing, translation, adaptation or modification, and generally all rights over present and future utilisation by any means, for any purpose and in any territory, throughout the period of protection. All use of the contents of this document requires the prior written permission of Parkeon. Parkeon reserves the right to change data, drawings and descriptions without prior notice. Certain characteristics may vary according to customer requirements and do not represent a commitment by Parkeon. Parkeon UK Ltd. Membrain House Ferndown Industrial Estate Wimborne, Dorset BH21 7PP - United Kingdom Phone +44 1202 850927 - Fax +44 1202 850903 Parkeon Inc. 40 Twosome Drive, Unit 7 Moorestown NJ 08057 - USA Phone +1 856 234 8000 - Fax +1 856 234 7178 Parkeon S.A.S. Parc La Fayette, 6 rue Isaac Newton, 25075 Besançon Cedex 9 - France Phone +33 (0)3 81 54 56 00 – Fax +33 (0)3 81 54 49 96 Head office: Le Barjac, 1 boulevard Victor, 75015 Paris - France Phone +33 (0)1 58 09 81 10 – Fax +33 (0)1 58 09 81 26 Parkeon S.A.S au capital de 30.382.146 euros 444 719 272 R.C.S. Paris Printed in France. WIFI kit - Neops base terminals - Operation manual Contents 1. ABOUT THIS DOCUMENT… ...................................................................................... 4 2. CHARACTERISTICS ..................................................................................................... 5 2.1 2.2 2.3 MAIN BOARD ............................................................................................................... 5 SLAVE BOARD ............................................................................................................. 6 DESCRIPTION OF FUNCTIONS ....................................................................................... 7 WIFI kit - Neops base terminals - Operation manual 1. About this document… This document describes the operation of the Wifi kit: • Starting up, • operation, • maintenance, used to centralise Neops base terminals in Wifi. Reference ocument describing the configurations of centralised systems User manual of Parkfolio On-Line MKL 04/020 Neo Document ref. 141596 FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Note: The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. WIFI kit - Neops base terminals - Operation manual 2. Characteristics 2.1 Main board Loader card connected to 20-pin socket Socket A of rack's ribbon cable (for card reader and relay board) Power socket Centralisation connector 50-pin socket for display unit and keypad ribbon cable Earthing pins D4849 Power sockets for peripherals Battery socket Socket B of rack's ribbon cable Datapack connector Main board protective cover D4628 On/off switch Loader socket Extraction lever WIFI kit - Neops base terminals - Operation manual 2.2 Slave board D5336 D5335 The slave board is connected directly to the main board centralisation connector. Slave board + modem (top view) Slave board (bottom view) Antenna connector Centralisation connector (for main board) Wifi Modem Slave board Antenna Adaptator Antenna Connector WIFI kit - Neops base terminals - Operation manual 2.3 Description of functions 2.3.1 Installation and initialisation The slave board and modem are mounted on the main board. Make sure the antenna is properly. Function 80: modem initialisation. To initialise the modem, use on-site programming function 80 described below: 1. MODEM PRESENT YES: 1 NO: 2 Enter 1 to start initialising the modem. Modem initialisation: From that point on, the main board initialises the modem without any more user input. The main board displays progress of the initialisation stage: 2. PLEASE WAIT During this stage, the main board powers up the modem. 3. MODEM INITIALISATION During this stage, the modem sends initialisation. If the initialisation procedure fails at this point (message “Init. not completed”), that means the slave board is not answering the main board. If the procedure is completed correctly, the main board moves on to the next stage. WIFI kit - Neops base terminals - Operation manual 4. NETWORK REGISTRATION During this stage, the main board waits for the modem to register on the Wifi network. 1. If initialisation fails during this stage (message “Init. not completed”), that means that the modem cannot be registered on the Wifi network : check that the antenna is correctly connected to the modem and that the antenna cable is correctly screwed to the antenna adapter. 5. INITIALISATION COMPLETED When the main board displays this message, that means that the modem has been successfully initialised. Initialisation is used to: • check assembly in the terminal; • check that the modem is capable of registering with the network. That is why function 80 should be repeated every time, whenever: • a new kit is installed; • the kit is removed from then put back into the terminal; Once the modem has been initialised, it still needs initialising on the terminal: • call numbers: server-side IP address (function 44); • configuring whether or not alarms are sent to the server (function 42). WIFI kit - Neops base terminals - Operation manual Programming Parkfolio Neo On-Line numbers (function 44) This function is used to save the Parkfolio Neo On-Line numbers in the memory of the main board. Numbers 1 to 10 are the server's IP address for Wifi. 2.3.2 Wifi communication To make a Wifi call, just use function 44 to programme the IP address of the Parkfolio Neo On-Line. In order to make a GPRS call, the terminal needs to know the server’s UDP Port number : this is the number of the port used to communicate with Parkfolio Neo OnLine. The port number entered while setting up Parkfolio Neo On-Line for Wifi communication is to be used here. Function 40: communication test Function 40 is used to test communication between the terminal and the communication server irrespective of the communication medium (Mobitex, GSM, SMS, GPRS and Wifi). 1. If a GSM Data number is programmed, the main board will try and make a GSM Data call with Parkfolio Neo On-Line. If the call succeeds and communication with Parkfolio Neo On-Line is satisfactory, the main board displays the message "Communication test OK". 2. If the programmed number is the IP address, the terminal tries to communicate via Wifi with Parkfolio Neo On-Line: o If the communication is satisfactory, the main board displays "Communication OK"; • If the main board displays “Transmission problem”, there may be several reasons for such behaviour: 1. The IP address of the server is incorrect; 2. Parkfolio Neo On-Line is not receiving data from the terminal (incorrect firewall setup, incorrect router setup etc.); 3. Parkfolio Neo On-Line is not responding (the Parkfolio Neo On-Line service is down). WIFI kit - Neops base terminals - Operation manual Below is a flowchart showing what action should be taken if there is a problem with function 40 during Wifi configuration: Function 40 Communication OK Transmission problem WIFI Centralisation system OK Check the UDP port number in GPRS Setup of the Parkfolio Neo On-Line for this SIM Check the firewall and router setup. Check that Parkfolio Neo On-Line is operating, using the display interface Error detected and corrected? (F40) YES NO Contact product support WIFI kit - Neops base terminals - Operation manual 10
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 10 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:acc43b80-55fc-464a-9ba5-0a2a42131686 Producer : GPL Ghostscript 8.15 Modify Date : 2006:07:28 17:35:15+02:00 Create Date : 2006:07:26 11:33:28Z Creator Tool : PScript5.dll Version 5.2 Metadata Date : 2006:07:28 17:35:15+02:00 Document ID : uuid:e74c7e72-e4f5-4763-a798-9966e7ffaf75 Format : application/pdf Title : Microsoft Word - Wifi kit user's manual.doc Creator : szabo Author : szaboEXIF Metadata provided by EXIF.tools