PARROT CK3500 professional car kit with GSM and GPS solutions User Manual

PARROT professional car kit with GSM and GPS solutions

user manual

Hands-freeCar KitUser manual For BluetoothMobile PhoneFRAESP P.25ENG P.5P.15onAclick inc.SAT-3500SAT-3500
www.sat-trac.com www.sat-trac.com
EnglishFrançaisEspañol51525onAclick inc.
Warning :The manufacturer Parrot S.A. and it’s affiliates shall not be held liable towards End-Users or third parties for prejudice caused by misuse of the product, nor for use that would be in violation of local traffic regu-lations and laws.Disclaimer :The information in this document is subject to change without notice and does not represent a commitment on the part of vendor. No warranty or representation, either expressed or implied, is made with respect of quality, accuracy or fitness for any parti-cular purpose of this document. Information in this document is subject to change without notice. Parrot reserves the right to change Product Specification and documentation at any time without notice. In no event will the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising out of the use or inability to use this product or docu-mentation, even if advised of the possibility of such damages. This document contains materials protected by copyright.All rights are reserved. No part of this manual may be reproduced or transmitted in any for, by any means or for any purpose without express written consent. Product names appearing in this document are mentioned fot identification purposes only.All trademarks, product names appearing in this document are registered property of their respective owners.PTCRB Approved.FCC Compliance Statement (FCC ID: RKXCK 3500):This device complies with part 2,15, 22 and 24 of the FCC rules.Statement according to FCC part 15.19 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Statement according to FCC part 15.21 Modifications not expressly approved by this company could void the user’s authority to operate the equipment. Statement according to FCC part 15.105 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resi-dential installation. This equipment generates, uses and can radiate radio fre-quency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televi-sion reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: . Reorient or relocate the receiving antenna. . Increase the separation between the equipment and receiver. . Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.. Consult the dealer or an experienced radio/TV technician for help. Declaration of Conformity:SAT-3500 is a customized version of the Parrot CK3500.We, Parrot S.A. of 174 Quai de Jemmapes, 75010 Paris, France, declare under our sole responsibility that our product, SAT-3500, to which this declaration relates is in conformity with appropriate standards EN300328, EN301489-17, EN 60950 following the provision of Radio Equipment and Telecommunication Equipment directive 1995/5/EC with requirements covering EMC directive 89/336/EEC and Low Voltage directive 73/23/EEC.Bluetooth:The Bluetooth® trade mark and logos are owned by the Bluetooth® SIG, Inc. and any use of such marks by Parrot S.A is under license. Other trademarks and trade names are those of their respective owners.Statment warning:The external antennas used for this mobile transmitter must provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
EnglishUser’s guideEN
SAT-3500 Advanced Car Kit6User’s guideOUTLINEBluetooth technology offers voice and data transmission via a short-distance radio link. It can link a wide range of wireless electronic equipment and expand the communication possibili-ties of mobile telephones and numerous pieces of equipment.Based in Paris, founded in 1994 by Henri SEYDOUX, ParrotS.A is one of the fastest-growing companies. From the verybeginning its specialties have been technologies associatedwith voice recognition and signal processing for telecoms andcars.The SAT-3500 Car Kit allows you to use your cellular phone while driving your car with the best of comfort and the best security possible.The names of your callers will appear on the screen.Your phonebook is accessible from the control screen.The voice command and the voice recognition allow you to keep your hands on the steering wheel.Your conversation is carried over the stereo speakers in your vehicle.On the screen you can access your telephone phonebook.Caller name display.Voice recognition.Volume control.Mutes the in-car radio. (- Requires mutable radio)Support call waiting.Pick-up and hang-up via voice command.INTRODUCTIONFunctionalities
SAT-3500 Advanced Car Kit 7ENUser’s guideLCD screen Power cableelectronic box microphonemute cable manualGSM & GPS AntennasContents of the packageSAT-3500 MOUNTINGInstallation of the electronic boxThe SAT-3500 system is fitted with 4 outputs:Input - in-car radio output LCD screen power micro-phone.It is recommended to install all the cables before fixing the control box. Each cable supplied has a different connector to avoid wrong connections.The box must not be installed near the heating or the air-con-ditioning.Ensure that it is not exposed to sunlight. Avoid installing it behind metal walls, which could alter the quality of the blue-tooth link.The mute cable is equipped with black ISO connectors and with a “line out” output.In-car radio with «line in» inputsPreferably use this type of connection by joining the brown and green wires as well as the yellow wires of the “mute” to the back of your in-car radio.In-car radio with «ISO» connectorsDisconnect the audio and supply bundles from the in-car radioLink the female connectors of the mute supply cables and ofInstallation of the in-car radio cablethe power supply cable to the in-car radio. Connect the audio and supply bundles from the vehicle to the male connectors. If the in-car radio is equipped with a mute input, connect theyellow wire of the mute cable to one of the “ Mute in “ inputs 1, 2 or 3.In-car radio without «ISO» connectorsYou must obtain an “ISO” adapter cableInstallation of the power supply cableThe red wire of the power cable must be connected to the permanent 12V, the orange wire to the 12V and the black wire to the earth.Verify the electric wiring of the ISO supply bundle of the in-car radio.In some vehicles it is necessary to reverse the positions of the red and orange wires.This operation is simply done by reversing the fuse holders.If the user does not intend to operate the car at least once during any thirty day period, we do not recom-mend connecting the orange wire to the permanent 12V, otherwise you risk causing the vehicle battery to go flat.
SAT-3500 Advanced Car Kit8User’s guideCABLE DIAGRAM CONNECTION Car kit Parrot, power cable Pin Color Description Number 1 White Mute In 1 2 Yellow Mute In 2 3 Blue Mute In 3 4 Orange + 12V Memory 5 Green Not used 6 Brown Not used 7 Red + 12 V Permanent 8 Black Ground Car kit Parrot, car’s speakers Pin Color Description Number 1 Grey Rear right speaker + 2 White Rear right speaker - 3 Blue Front right speaker + 4 Green Front right speaker - 5 Red Front left speaker + 6 Orange Front left speaker - 7 Brown Rear left speaker + 8 Black Rear left speaker -WIRING FOR ISO CARS
SAT-3500 Advanced Car Kit 9ENUser’s guide Microphone:The microphone must be aimed at the driver and can be installed:Anywhere in the vehicle or the LCD screen.LCD screen:Several accessories allow the screen to be installed in multiples sites in the body of the vehicle.Fastening on the dashboardUsing the double-face tape provided.Just stick the display on a plane andclean spot on the dashboard.With a foot on the dashboardOnce the display has been mounted on the foot provided in the packaging, stick this foot using the double-face tape on the dashboard. From then on, the screen becomes directional. During the initial charging, it is necessary to pair your mobile phone with the hands-free kit.Activate Bluetooth on your mobileSearch for peripheral devices:For more information, refer to the booklet on your telephone ( Pairing section )Or visit www.sat-trac.com Home / Support / DownloadOnce it is detected, “ SAT-3500” is displayed on your mobile phone.Enter the pairing code 1234.“Pairing underway” is displayed on the SAT-3500.“Pairing complete” is displayed on the screen, once pairing is success-ful.The SAT-3500 then connects to your mobile phone.Once it is connected, the Bluetooth logo is displayed on the screen (except for mobile phones fitted with the Headset pro-file).Mounting Instructions- Rotate “B” from the leftto the right to screw “B” on “A”Only use the screws “D”.- Insert the cable from the “A”through the hole on “B”- Then, screw “C” on “B”.Only use the screw “E”Don’t forget to insert the discInstallation of the microphone and the consoleA : LCD screenB : FootC : Back supportE : Iron screw ( 10mm )D : Plastic screws (10mm )PAIR DEVICE AND FIRST USEWARNINGSome telephones use Bluetooth in aparticular manner. Verify in the“Preferences” / “Advanced Pref. “ / “Pair Telephone” menu if the model of your telephone is listed there. Then select the option in the menu.SAPIf you want to utilize the Sim Access Profile service on your telephone, please refer to the GSM section of the booklet
SAT-3500 Advanced Car Kit10 User’s guideFor certain types refer to the page 12 “pair a telephone” With certain mobile phones, the name of your mobile,the battery level and the network are displayed on the screen.The menus are accessible from then on and the hands-free kit announces their name. From then you are connected to the hands-free kit and can use it for com-municating.Call: Access your mobile phone’s phonebook.Receive a call: Press the green button of the hands-free kit to pick up the mobile phone.Hang up: Press the red button of the SAT-3500.Voice mail: Click on the scroll but-ton while communicating. A menu appears and allows you to dial a digit. Return to the communication screen by selecting the arrow. Repeat function: Press the green key of the hands-free kitfor several seconds to call the last number dialed.Communication volume: Adjust the communication volume by turning the scroll button.MENUThe menu of the SAT-3500 is made up of the following head-ings: phone book, call log, dial number, voice cmds, settings, SIM card, GPS.Synchronization of your telephone index with the SAT-3500 is one of the innovative functions of this hands-free kit.This synchronization is automatic with numerous telephones.If this is not automatic, you have the option of transferring yourtelephone contacts to the kit via Bluetooth.Refer to the section “Sending contacts via Bluetooth” (or “Object push”) in your telephone user manual.Reception of contacts via Bluetooth is available for the Sony Ericsson P800/P900 and smartphones if pairing is done in the corresponding mode.(refer to the “ATTENTION” section in the “Pairing” chapter)Once your contacts are transferred to the kit, you can access the voice recognition function available in the “Voice com-mands” menu.You have the option of making a call from the menu index.Select phonebookSelect a letter using the scroll buttonConfirm by pressing the scroll buttonOnce the contact is selected:The green button dials the number by default. The scroll button helps select from the different numbers of the contact.Press the green button to call.PhonebookCall from the phonebook
SAT-3500 Advanced Car Kit 11ENUser’s guideThe keywords of the SAT-3500 are:telephone, hang up, work, mobile, general, other and pre-ferred.Telephone: Hangs up a call or activate voice recognition.Hang up: Terminates the communication.Work, mobile, general, other, preferred: key words by telephone number. These key words help select the desired number when a contact comprises several words. The learning sequence is identical to that of the contacts. The key words must be recorded to be validated.Personalized substitutions of keywords are allowed.Recognition of the SAT-3500 is more complete than that of most mobile phones and works in a noisy environment.Reco. car-kit: voice prints registered in the memory of the hands-free kit.Reco. telephone: voice prints registered in the memory of the telephone.Press the green button, or say “Telephone” if the key word “Telephone” is registered.After the sound beep, pronounce the name of your contact.The SAT-3500 repeats the name in case of connection, and if not offers a second attempt following a beep.If the contact has a single telephone number, the SAT-3500 calls the partner number. If the contact has a single telephone number, the SAT-3500 calls the partner number.If the contact has several numbers and the key words per tele-phone number are registered, the SAT-3500 proposes recog-nizing the key word linked to the number after a beep.This heading displays the list of calls and is divided into 3 sub-menus:Missed calls / received calls / sent callsSelect the desired contactPress the scroll button or the green button to redial.Dial a number by turning the scroll but-ton to the right or the left.Press the scroll button to select a char-acter.The basket icon deletes the last charac-ter. Once the number is dialled, press the green button to make the call.This menu programs the voice recognition of the hands-free kit.It is divided into 3 sub-menus: index / key words / voice reco. selection. To attribute a voice print to a contact, select a letter:Select the name by clicking on the scroll button.Once the name is selected, click on the scroll button to initiate the machine learning.Follow the instructions displayed on the screen.Once the voice imprint is attributed, a bubble is displayed to the right of the name.Last callsDial a numberVoice commandsKeywordsMake a call via voice recognitionSelection of the type of voice recognition
SAT-3500 Advanced Car Kit12 User’s guideRings and microphone:These options let you adjust the volume of the ring and of the microphone.Telephone:This option allows you to adjust the vol-ume of the communication.This function activates or deactivates the voice assistant of the menus.The menus will be announced by the voice of the operator in the selected language.This option optimises the search for info from the interface dur-ing driving.3 headings allow you to personalise the display:Contrast and brightness:Use the scroll but-ton for the desired level and validate by clicking on the latter.Zoom phonebook:Lets you select the resolution of the displayed text in the “ phonebook “ and “ call logs “ menus.Select the 2-line or 3-line mode.Confirm by clicking on the scroll button.This menu allows you to customize the SAT-3500.List: You can access the list of peripheral devices which have been paired with the SAT-3500.You have the option of connecting, disconnect-ing, or wiping from the your telephone memory. Select the desired language.Confirm by clicking on the scroll button.If you select “ automatic “, the hands-free kit synchronizes with the language of your SIM card (this option is available only on certain devices)Voice Menus:This option allows you to adjust the volume of the messages announced by the hands-free kit and voice imprints, which you have recorded.VolumeVoice MenusDisplayLanguageWARNINGIf you delete a device, all thevoice imprints attributed to it will be deleted.Paired devicesSETTINGS
SAT-3500 Advanced Car Kit 13ENUser’s guideActivate/deactivate the automatic pick-up.Software version:Version of the display software / Free memory.Our customer service is at your disposal. You can contact it via email or telephone. Connect to www.sat-trac.com for more information. Contact: usersupport@sat-trac.com or techsupport@sat-trac.comThis menu gives access to the following headings:Pairing a telephone, object push, software upgrade, demo mode.Some phones require a particular setting of your hands-free kit before pairing. ( for example SonyEricsson P900, PDA running Windows CE )Select the input corresponding to your telephone, then pair your device when the SAT-3500 displays “Pair your telephone”.Some telephones can require a particular setting of your hands-free kit before sending contacts. ( If your telephone does not display your kit in the list of devices to whichcontacts can be sent, activate the “Always active” option.)Warning: this configuration of your kit can cause poor func-tioning with certain telephones. We recommend that you return to “Automatic” mode as soon as you havesent your contacts.Activate this option when you install an upgrade by Bluetooth of your kit, from a personal computer. This option will be auto-matically disactivated when restarting your kit.Go to our website for more information : www.sat-trac.com Launch a demo of the hands-free kit.Restarting the carkit is necessary to deactivate this mode.The SAT-3500 kits load a GPS (Global Positioning System) module giving access to the current position of the vehicle. This information is available via Bluetooth on a channel accessible by the majority of PDAs and Smartphones.If you have a navigation application on your PDA or smart-phone, all you need do is pair this periph-eral device with the SAT-3500, and open a series connection to the GPS port. Certain navigation applications let you directly select as Bluetooth GPS source.On your device the GPS configuration to be selected is NMEA 0183v2 9600, in the event it is necessary to supply this information. Once connected, a GPS icon is visible on the screen of the SAT-3500.Automatic responseInformationHotlineADVANCED SETTINGSPairing a telephoneObject push Software upgradeDemo modeGPS SAT-3500 Connection to the GPS service
SAT-3500 Advanced Car Kit14from the GSM antenna of the SAT-3500 and you save on the battery in your Bluetooth telephone.For safety reasons, the pairing procedure of a SAP telephone is different.You must select the SIM Access Phone section in the “Preferences” / “Advanced Pref.” / “Pair Telephone” menu.A 16-digit code is displayed on the screen of the SAT-3500, which is the link code to be captured on your SAP telephone.If the SAT-3500 requires the PIN code of your personal SIM card, it will ask you to enter it.The SIM Access mode is activated by default if your telephone supports it. The SAT-3500 will use this mode as soon as your telephone is detected by maintaining continuity of service.The functioning of the interface is the same as for Bluetooth telephony.This heading allows you to insert/modify the PIN code of your personal SIM card or to deactivate the SIM Access Profile mode.Once the GPS service is connected the SAT-3500 equipped with GPS module allowsyou to listen to the sound indications of your navigation software over the car speakers of your vehicle. Your navigation will thus be car-ried out under optimal conditions (this functionality is available only with certain navigation software). To do this, from your PDA or smartphone open the service Ear phone/Headset, which is available on the car-kit.If you want to make a call or answer an incoming call, thisservice is automatically closed then reopened to allow you to use telephony functionality under the best conditions.In this heading you can fully disable the GPS service to pre-vent anyone from connecting to this service.The Information section specifies the GPS configuration and the peripheral device currently connected to this service if it is activeThe SAT-3500 loads a class 8/10 GSM/GPRS module. The presence of this module let you use the SIM Access Profile (SAP) of your telephone or even use your SAT-3500 directly as a car phone, without Bluetooth telephone, with only a physical SIM card, it also lets you use your kit as Internet access point by using the GPRS.The SIM Access Profile (SAP) allows the information on your personal SIM Card to be used by Bluetooth. You thus benefit GSM OFFBOARD SAT-3500PairingFunctioningThe SIM Card headingGPS MenuVoice indications of your navigation

Navigation menu