PARROT CK5050PIA Bluetooth module, hands free car kit User Manual CK5050 Datasheet 1 03

PARROT Bluetooth module, hands free car kit CK5050 Datasheet 1 03

Users Manual

Download: PARROT CK5050PIA Bluetooth module, hands free car kit User Manual CK5050  Datasheet 1 03
Mirror Download [FCC.gov]PARROT CK5050PIA Bluetooth module, hands free car kit User Manual CK5050  Datasheet 1 03
Document ID1003103
Application IDCooV+qRW25On0wk26owB4w==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize79.16kB (989545 bits)
Date Submitted2008-09-18 00:00:00
Date Available2008-09-19 00:00:00
Creation Date2008-10-09 17:49:59
Producing SoftwareGPL Ghostscript 8.54
Document Lastmod2008-10-09 17:49:59
Document TitleCK5050+_Datasheet_1.03
Document CreatorPDFCreator Version 0.9.3
Document Author: v.leblanc

1 (28)
Created by :
Reference
Title
David COROLLEUR DC-2008-029
Revised by :
Date
Hands Free Car Kit Module CK5050+ - Datasheet
edition N° :
David COROLLEUR 09/09/2008
1.03
Approved by :
Function
Date
Hands Free Car Kit Module
CK5050+
Datasheet
Product Scope
Parrot has identified a demand for the integration of the telephony into a host product like car radio or
navigation system. The answer to this demand is CK5050+.
The CK5050+ is a feature-rich Bluetooth Hands Free Car Kit solution dedicated for the integration of
Handsfree Bluetooth applications in car radios and car telematics systems.
2 (28)
Created by :
Reference
David COROLLEUR DC-2008-029
Revised by :
Date
Title
Hands Free Car Kit Module CK5050+ - Datasheet
edition N° :
David COROLLEUR 09/09/2008
1.03
Approved by :
Function
PRODUCT OVERVIEW
1.1
1.2
CK5050+ Features
Memory Flash required
ELECTRICAL ARCHITECTURE
2.1
2.2
2.3
CK5050+ internal Block Diagram
Electrical Interfaces Characteristics
Main Connector Pinout
HARDWARE LAYOUT
3.1
3.2
Components placement with internal antenna (PI040123AA)
Components placement without internal antenna (PI040114AA - PI040124AA)
10
10
12
SOFTWARE SPECIFICATIONS
14
Bluetooth Stack
Bluetooth Profiles Supported
Software Architecture
Software Interface
14
14
14
15
4.1
4.2
4.3
4.4
Date
MECHANICAL DESIGN
5.1.1
5.1.2
5.1.3
5.1.4
Shielding
CK5050+ versions
Integration on the motherboard
CK5050+ mechanical design
16
16
18
19
20
DEVELOPMENT TOOLS
23
FCC REQUIREMENTS FOR MODULE APPLICATION
25
CE DECLARATION
27
ANNEXE 1: CK5050+APPLICATION (EXAMPLE)
28
3 (28)
Created by :
Reference
David COROLLEUR DC-2008-029
Revised by :
Date
Title
Hands Free Car Kit Module CK5050+ - Datasheet
edition N° :
David COROLLEUR 09/09/2008
1.03
Approved by :
Function
Date
Product Overview
This document is the Datasheet of the Parrot CK5050+ Bluetooth Module.
The CK5050+ is a feature-rich Bluetooth platform dedicated for the integration of Bluetooth applications in car
audios, car telematic systems or any systems requiring a complete embedded Bluetooth solution.
1.1
CK5050+ Features
Bluetooth connectivity
•
Bluetooth Power Class 2 Radio
•
Embedded Bluetooth v1.1, v1.2 & v2.0 compliant
•
Embedded profiles
•
Compatible with all Bluetooth phones
•
Pairing and connection with all Bluetooth Devices: Phones, Smartphones, PDA …
•
Multiple user support: Up to 5 paired phones
•
Multiple connection (up to 3 device connected at the same time)
•
Multiple profile (for example A2DP and HFP at the same time with same or different devices)
Phone
•
Pick-up, Hang-up, Redial
•
Automatic answer (from host via dial command)
•
Send DTMF during calls
•
Private Mode
Phone Book
•
Automatic Phone book synchronization over Bluetooth (up to 1000 names)
•
Call history (dialed number, received calls, missed calls)
•
All Synchronization Methods
•
Full Unicode for compatibility with numerous characters sets (European, Russian, Chinese, Japanese…)
Digital Signal Processing and Acoustics
•
Acoustic Echo cancellation for Full Duplex operation
•
Noise reduction
•
Beam forming with 2 microphones inputs
•
Volume control
•
Speaker dependant voice recognition (trained names and keyword)
•
Speaker independent voice recognition (Nuance licensing)
•
Text To Speech feature.
Audio Streaming
•
Embedded SBC decoder
•
Embedded MP3 decoder from Thomson Licensing (optional)
•
Stereo audio output
Miscellaneous
•
Provide Phone Battery Level and Network Level, Carrier Name (depends on phones)
•
Embedded test pattern
Software Update
•
Full standard Software available (free upgrade from Parrot homepage)
•
Software update available through Bluetooth or UART
•
Very large compatibility with Phones, Smartphones, PDAs, Music players
USB
•
USB 2.0 Full Speed
•
Access to mass storage device
•
File browsing
4 (28)
Created by :
Reference
David COROLLEUR DC-2008-029
Revised by :
Date
Title
Hands Free Car Kit Module CK5050+ - Datasheet
edition N° :
David COROLLEUR 09/09/2008
1.03
Approved by :
Function
1.2
Date
Memory Flash required
•
•
•
Flash required for the CODE: Around 2Mbytes
Flash required for the user Data (settings, phonebook…) : Around 4 MBytes
Flash required for speaker independent voice recognition and text to speech:
Voice recognition only: 3 Mbytes + 1.1 Mbytes per language
Voice recognition and Text To Speech: 7 Mbytes + 16 Mbytes per language
Example for 1 language:
VR + TTS
VR only
23 MBytes
4.1 MBytes
Code
2 MBytes
2 MBytes
Data
Required
Memory Flash
4 MBytes 29 MBytes
256 MBits
4 MBytes 10.1 MBytes 128 Mbits
Code
2 MBytes
2 MBytes
Data
Required
Memory Flash
4 MBytes 109 MBytes 1 GBits
4 MBytes 15.6 MBytes 128/256 Mbits
Example for 6 languages:
VR + TTS
VR only
103 MBytes
9,6 MBytes
5 (28)
Created by :
Reference
Title
David COROLLEUR DC-2008-029
Revised by :
Date
Hands Free Car Kit Module CK5050+ - Datasheet
edition N° :
David COROLLEUR 09/09/2008
1.03
Approved by :
Function
Date
Electrical Architecture
2.1
CK5050+ internal Block Diagram
CK5050+ Simplified Block Diagram
The main electrical interfaces provided by the CK5050+ are:
• Bluetooth: 2.0 EDR
• Audio:
Digital I2S interface: 1 stereo input + 2 stereo output (need to have an I2S codec on the motherboard)
Analog interface: 2 audio inputs
• Serial Link : UART for the software interface through AT commands
• 2 x USB 2.0 OTG
• I²C Interface
• 3.3 V Power Supply
• Flash : 256Mbits / 512Mbits / 1Gbits
• SDRAM: 64Mbits/ 128Mbits
6 (28)
Created by :
Reference
Title
David COROLLEUR DC-2008-029
Revised by :
Date
Hands Free Car Kit Module CK5050+ - Datasheet
edition N° :
David COROLLEUR 09/09/2008
1.03
Approved by :
Function
2.2
Date
Electrical Interfaces Characteristics
Absolute Maximum Rating
Supply Voltage
Storage Temperature
Min
-0.3
-40
Max
3.8
+125
Unit
Min
3,2
-40
Max
3.6
+85
Unit
°C
Operating Conditions
Supply Voltage
Ambiant Temperature
°C
 UART: 16C550 Compatible Type. A bit “Start Bit=0” is added to the beginning of each word (8bits). The Least
Significant Bit (LSB) is sent first. A “Stop Bit=1” is sent by the transmitter at the end of each word.
MaxVOL=0.15V
MinVOH=Vcc-0v15 (at IOH=0.1mA) open collector with build in 2.5k pull up
MaxVIL=0.8V
MinVIH=2V
UART0_TX & UART1_TX:
Min
Max
Trise (ns)
10
Tfall (ns)
10
The UART1_RX and UART0_RX are Schmitt trigger inputs
Condition
Cload = 50pF
Cload = 50pF
I2C
MaxVOL=0.15V
MinVOH=Vcc-0v15
MaxVIL=0.8V
MinVIH=2V
RESET: Asynchronous reset signal, used to reset the Parrot Daughter Board, active low.
MaxVIL=0.4V
MinVIH=2.5V
 MIC_PWR: Connect to electret condenser microphone (Impedance less than 2.2kOhms)
Electrical characteristics of microphone:
Operating voltage: 2..02V-2.48V DC
Current consumption: 500µA max.
Use of pre-amplified microphones is in option.
Optional: another power supply (from motherboard) can be used to supply the microphone(s)
 VCC: Supply voltage 3.4V(-0.2V/+0.2V) including tolerances, thermal changes, noise over/under shoot due to
load change and/or car battery voltage change, load dump.
Mean current : <300 mA (All components active and communication or streaming mode)
Peak current < 1.5A during switch on: > mA during 700 ms (max).
7 (28)
Created by :
Reference
David COROLLEUR DC-2008-029
Revised by :
Date
Title
Hands Free Car Kit Module CK5050+ - Datasheet
edition N° :
David COROLLEUR 09/09/2008
1.03
Approved by :
Function
Date
POWER CONSUMPTION
FUNCTIONING MODES
STOP MODE
CURRENT ON 3.4V
REMARKS
<20 µA
BT radio and Parrot5+ ASIC stopped, Internal voltage regulator
switched off.(Power off or Reset active)
STANDBY MODE
<200 mA
BT module in sniff mode, Parrot ASIC in idle
HANDSFREE MODE
<300 mA
Hands free communication with a Bluetooth enabled phone
AUDIO STREAMING
<300 mA
Reception of an encoded stream, decoding, playing of the audio
8 (28)
Created by :
Reference
David COROLLEUR DC-2008-029
Revised by :
Date
Title
Hands Free Car Kit Module CK5050+ - Datasheet
edition N° :
David COROLLEUR 09/09/2008
1.03
Approved by :
Function
2.3
Date
Main Connector Pinout
Main connectors:
Male connector:
Female connector:
The following pinout allows an interface to the CK5050+ according to market standards:
The following pinout allows an interface to the CK5050+ according to market standards:
9 (28)
Created by :
Reference
Title
David COROLLEUR DC-2008-029
Revised by :
Date
Hands Free Car Kit Module CK5050+ - Datasheet
edition N° :
David COROLLEUR 09/09/2008
1.03
Approved by :
Function
PIN
Date
INPUT
/ OUTPUT
FUNCTION
COMMENT
10
RIN
LIN
MIC1N
MIC2N
MIC1P
MIC2P
MIC_PWR
VSS
BOOTS
NRESET
Microphone power supply
Ground
To update the soft
RESET trigger Input
11
USB0_VBUS
USB0 Vbus 5V
12
13
14
15
USB1_VBUS
USB0_ID
USB1_ID
USB0_DRV_VBUS
USB1_DRV_VBUS /
O/I
IPOD_READY
USB0_DO/I
USB1_DO/I
USB0_D+
O/I
USB1_D+
O/I
VSS
VSS
VCC
VCC
VSS
VSS
U1_IN
U1_OUT
U0_IN
U0_OUT
I2C_CLK
I2C_DA
O/I
VSS
VSS
I2S_CLK
O/I
I2S_IN
I2S_MCLK
O/I
I2S_OUT1
I2S_SYNC
O/I
I2S_OUT2
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
Line in : right input
Line in : left input
Microphones : Analog audio inputs
USB1 Vbus 5V
USB0 ID pin of mini AB receptacle (OTG)
USB1 ID pin of mini AB receptacle (OTG)
Drive VBUS (OTG) USB0
Drive
VBUS
(OTG)
USB1
Connected
IPOD_Authentication_Coprocessor
USB0 interface D- signal
USB1 interface D- signal
USB0 interface D+ signal
USB1 interface D+ signal
Ground
Ground
POWER 3.4V
POWER 3.4V
Ground
Ground
16C550 Compatible type
(for Debug interface)
16C550 Compatible type
(for Host AT commands and Flash Update interface)
I2C clock
I2C data
Ground
Ground
I2S serial clock
I2S serial data in 1
I2S Master clock
I2S serial data out
I2S synchronization
I2S serial data out (secondary)
to
10 (28)
Created by :
Reference
David COROLLEUR DC-2008-029
Revised by :
Date
Title
Hands Free Car Kit Module CK5050+ - Datasheet
edition N° :
David COROLLEUR 09/09/2008
1.03
Approved by :
Function
Date
Hardware layout
3.1
Components placement with internal antenna (PI040123AA)
Details:
U100: Parrot5+ ASIC (BGA) + U101/U102: SDRam/Flash (BGA) + U802 BT radio transceiver (BGA) + U1702:
1V8 Voltage regulator (DFN8) + U1700: 1V2 Voltage regulator (DFN8) + U1701: Voltage supervisor (TSOT8)
+U600: ADC (QFN) +X800: Precision crystal oscillator + J001: Main connector
COMPONENTS SIDE
11 (28)
Created by :
Reference
David COROLLEUR DC-2008-029
Revised by :
Date
Title
Hands Free Car Kit Module CK5050+ - Datasheet
edition N° :
David COROLLEUR 09/09/2008
1.03
Approved by :
Function
Date
BOTTOM SIDE
PCB size: 32mm x 50.7mm Tolerances +/- 0.1 mm
12 (28)
Created by :
Reference
David COROLLEUR DC-2008-029
Revised by :
Date
Title
Hands Free Car Kit Module CK5050+ - Datasheet
edition N° :
David COROLLEUR 09/09/2008
1.03
Approved by :
Function
3.2
Date
Components placement without internal antenna (PI040114AA - PI040124AA)
COMPONENTS SIDE
13 (28)
Created by :
Reference
David COROLLEUR DC-2008-029
Revised by :
Date
Title
Hands Free Car Kit Module CK5050+ - Datasheet
edition N° :
David COROLLEUR 09/09/2008
1.03
Approved by :
Function
Date
BOTTOM SIDE
PCB size: 32mm x 49.7mm Tolerances +/- 0.1 mm
14 (28)
Created by :
Reference
David COROLLEUR DC-2008-029
Revised by :
Date
Title
Hands Free Car Kit Module CK5050+ - Datasheet
edition N° :
David COROLLEUR 09/09/2008
1.03
Approved by :
Function
Date
Software Specifications
4.1
Bluetooth Stack
4.2
4.3
HCI (Host Controller interface),
L2CAP (Logical Link Control and Adaptation Protocol),
RFCOMM (TS011...),
SDP (Service Discovery Protocol),
OBEX (IrDA Object Exchange).
Bluetooth Profiles Supported
Generic Access Profile
GAP
Phone Management
•
HFP 0.96 - 1.0 - 1.5
•
HSP 1.0
Message Management
•
MAP 1.0
Phone Book
•
PBAP 1.0
•
SYNC 1.1 (IrMC SYNC over BT)
•
SYNCML
•
OPP 1.0 Server/Client (Vcard 2.1)
•
GSM 07.07 AT Commands
•
Nokia synchronization protocol
Multimedia
•
A2DP (Audio)
•
SBC decoding
•
(optional MP3 decoding)
•
AVDTP
•
AVRCP
Others
•
SPP 1.1
•
BNEP, PAN
•
FTP 1.0
•
Image transfer over OPP
•
DUNP 1.1
•
Software update over SPP
•
Remote configuration
Software Architecture
See Bluetooth Stack Software Specification (Confidential).
15 (28)
Created by :
Reference
David COROLLEUR DC-2008-029
Revised by :
Date
Title
Hands Free Car Kit Module CK5050+ - Datasheet
edition N° :
David COROLLEUR 09/09/2008
1.03
Approved by :
Function
4.4
Date
Software Interface
The main target of the software interface is to provide a high level command set, hiding the internal complexity of
the Bluetooth function and the variability of its standard across different devices.
This software interface is based on well-known AT commands. Some of these commands are directly derived from
the GSM 07.07 recommendation and from the appropriate Bluetooth profiles.
Some supplementary commands are used to manage Bluetooth related functions like device pairing and connection
management as well as the acoustic and speech recognition functions.
AT Command List and Bluetooth AT Command Software Specification is available.
BLUES supports Unicode, which allows the management of accents and phonebook in any language.
BLUES is also very friendly with a flexible MMI. One can use BLUES with a simple single or double key interface as
well as a diversity of graphic displays.
16 (28)
Created by :
Reference
David COROLLEUR DC-2008-029
Revised by :
Date
Title
Hands Free Car Kit Module CK5050+ - Datasheet
edition N° :
David COROLLEUR 09/09/2008
1.03
Approved by :
Function
Date
Mechanical Design
The CK5050+ features a male connector allowing a connection to the motherboard through a female connector.
Board to Board Main Connector
 40 PIN connector
 0.5mm pitch double row
5.1.1
Shielding
SHIELDING
PART1
17 (28)
Created by :
Reference
David COROLLEUR DC-2008-029
Revised by :
Date
Title
Hands Free Car Kit Module CK5050+ - Datasheet
edition N° :
David COROLLEUR 09/09/2008
1.03
Approved by :
Function
PART2
Date
18 (28)
Created by :
Reference
Title
David COROLLEUR DC-2008-029
Revised by :
Hands Free Car Kit Module CK5050+ - Datasheet
Date
edition N° :
David COROLLEUR 09/09/2008
1.03
Approved by :
Function
5.1.2
Date
CK5050+ versions
CK5050+ VERSIONS
PI Number
Connector type
Bluetooth Antenna
Model
PI040114
Female (9 mm)
External
CK5050+FEA
PI040123
Male
Internal
CK5050+MIA
PI040124
Male
External
CK5050+MEA
CK5050+ WITH MALE CONNECTOR
•
CK5050+
40R-JMCS-G-TF from JST
•
Host
40P3.0-JMCS-G-TF
Or
40P10.0-JMCS-G-TF
CK5050+ WITH FEMALE CONNECTOR
•
CK5050+
40P9.0-JMCS-G-B-TF from JST
•
Host
40RF-JMCS-G-1-TF from JST (Absorption misalignment type)
19 (28)
Created by :
Reference
Title
David COROLLEUR DC-2008-029
Hands Free Car Kit Module CK5050+ - Datasheet
Revised by :
edition N° :
Date
David COROLLEUR 09/09/2008
1.03
Approved by :
Function
5.1.3
Date
Integration on the motherboard
Prepared
David COROLLEUR
Title
CK5050+ Datasheet
Approved
Hocine BELKHOUDJA
Date
15/04/08
5.1.4
Revision
1.01
20
File
CK5050+_Datasheet_1.03.doc
CK5050+ mechanical design
CK5050+ WITH EXTERNAL ANTENNA (PI040114AA)
Mechanical dimensions (Tolerances: -0.1/0.1 mm for the thickness and -0.2/0.2 mm for length and the
width) with external BT antenna
The holes highlighted in are the holes where the shielding is soldered
PROPRIETARY AND CONFIDENTIAL
The information contained in this document is the sole property of Parrot.
Any reproduction in part or as a whole without the written permission of Parrot is prohibited.
Project
CK5050+
Part Numbers
20
Prepared
David COROLLEUR
Title
CK5050+ Datasheet
Approved
Hocine BELKHOUDJA
Date
15/04/08
Revision
1.01
21
File
CK5050+_Datasheet_1.03.doc
CK5050+ WITH PCB ANTENNA (PI040123AA)
Mechanical dimensions (Tolerances: -0.1/0.1 mm for the thickness and -0.2/0.2 mm for length and the
width) with internal BT antenna
The holes highlighted are the holes where the shielding is soldered
PROPRIETARY AND CONFIDENTIAL
The information contained in this document is the sole property of Parrot.
Any reproduction in part or as a whole without the written permission of Parrot is prohibited.
Project
CK5050+
Part Numbers
21
Prepared
David COROLLEUR
Title
CK5050+ Datasheet
Approved
Hocine BELKHOUDJA
Date
15/04/08
Revision
1.01
22
File
CK5050+_Datasheet_1.03.doc
CK5050+ WITH EXTERNAL ANTENNA (PI040124AA)
Mechanical dimensions (Tolerances: -0.1/0.1 mm for the thickness and -0.2/0.2 mm for length and the
width) with external BT antenna
The holes highlighted red are the holes where the shielding is soldered
PROPRIETARY AND CONFIDENTIAL
The information contained in this document is the sole property of Parrot.
Any reproduction in part or as a whole without the written permission of Parrot is prohibited.
Project
CK5050+
Part Numbers
22
Prepared
David COROLLEUR
Title
CK5050+ Datasheet
Approved
Hocine BELKHOUDJA
Date
15/04/08
Revision
1.01
23
File
CK5050+_Datasheet_1.03.doc
Development Tools
Demo board available
Host Software Interface specification
Host software example with C++ source code.
CK5050 WORKBENCH/TOP SIDE VIEW
PROPRIETARY AND CONFIDENTIAL
The information contained in this document is the sole property of Parrot.
Any reproduction in part or as a whole without the written permission of Parrot is prohibited.
Project
CK5050+
Part Numbers
23
Prepared
David COROLLEUR
Title
CK5050+ Datasheet
Approved
Hocine BELKHOUDJA
Date
15/04/08
Revision
1.01
24
File
CK5050+_Datasheet_1.03.doc
CK5050 WORKBENCH/BOTTOM SIDE VIEW (not released)
PROPRIETARY AND CONFIDENTIAL
The information contained in this document is the sole property of Parrot.
Any reproduction in part or as a whole without the written permission of Parrot is prohibited.
Project
CK5050+
Part Numbers
24
Prepared
David COROLLEUR
Title
CK5050+ Datasheet
Approved
Hocine BELKHOUDJA
Date
15/04/08
Revision
1.01
25
File
CK5050+_Datasheet_1.03.doc
FCC Requirements for module application
• CK5050+ with External Antenna (PI040114AA)
FCC ID: RKXCK5050PEA
In accordance with FCC Part 15, the CK5050+ is listed as a Limited Modular Transmitter device.
In support of the Modular Transmitter Approval, the following is stated:
• The module does have buffered modulation / data inputs.
• The module does regulate its own power supply.
• The module have its own RF shielding
• The module can be tested as a stand-alone device.
• The module is labeled with the proper FCC ID, and labeling instructions are provided to OEM end users
for external product labels.
• The module does have instruction for proper use.
• The module does meet the FCC RF regulations.
Limited Modular Transmitter Approval, is granted, instead of Modular Transmitter Approval, because the following
condition is not met:
• The module does not have a permanently attached antenna.
• The applicant of the final device into which the module CK5050+ is installed is not required to obtain a new
authorization for this. Moreover, module CK5050+ is also submitted to CE mark, Bluetooth certification, and is
considered is an automotive product. This product respects FCC part 15 C requirements for a Bluetooth application.
• Module CK5050+ is labelled with its own FCC number on its shielding, and, if the FCC ID is not visible when the
module is installed inside final device, then the outside of the device into which the module is installed must also
display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains
Transmitter Module FCC ID: RKXCK5050PEA” or “Contains FCC ID: RKXCK5050PEA.” Any similar wording
that expresses the same meaning may be used.
• Module CK5050+ can not be integrated in a final device which is connected to the AC power lines. It is necessary
that final device must be supplied by a battery.
• FCC RF exposure requirements: This device and its antenna(s) must not be collocated or operating in conjunction
with any other antenna or transmitter.
• THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
PROPRIETARY AND CONFIDENTIAL
The information contained in this document is the sole property of Parrot.
Any reproduction in part or as a whole without the written permission of Parrot is prohibited.
Project
CK5050+
Part Numbers
25
Prepared
David COROLLEUR
Title
CK5050+ Datasheet
Approved
Hocine BELKHOUDJA
Date
15/04/08
Revision
1.01
26
File
CK5050+_Datasheet_1.03.doc
• CK5050+ with Internal Antenna (PI040123AA)
FCC ID: RKXCK5050PIA
In accordance with FCC Part 15, the CK5050+ is listed as a Modular Transmitter device.
In support of the Modular Transmitter Approval, the following is stated:
• The module does have buffered modulation / data inputs.
• The module does regulate its own power supply.
• The module have its own RF shielding
• The module can be tested as a stand-alone device.
• The module is labeled with the proper FCC ID, and labeling instructions are provided to OEM end users
for external product labels.
• The module does have instruction for proper use.
• The module does meet the FCC RF regulations.
• The module have a permanently attached antenna.
• The applicant of the final device into which the module CK5050+ is installed is not required to obtain a new
authorization for this. Moreover, module CK5050+ is also submitted to CE mark, Bluetooth certification, and is
considered is an automotive product. This product respects FCC part 15 C requirements for a Bluetooth application.
• Module CK5050+ is labelled with its own FCC number on its shielding, and, if the FCC ID is not visible when the
module is installed inside final device, then the outside of the device into which the module is installed must also
display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains
Transmitter Module FCC ID: RKXCK5050PIA” or “Contains FCC ID: RKXCK5050PIA.” Any similar wording
that expresses the same meaning may be used.
• Module CK5050+ cannot be integrated in a final device which is connected to the AC power lines. It is necessary
that final device must be supplied by a battery.
• FCC RF exposure requirements: This device and its antenna(s) must not be collocated or operating in conjunction
with any other antenna or transmitter.
• THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
PROPRIETARY AND CONFIDENTIAL
The information contained in this document is the sole property of Parrot.
Any reproduction in part or as a whole without the written permission of Parrot is prohibited.
Project
CK5050+
Part Numbers
26
Prepared
David COROLLEUR
Title
CK5050+ Datasheet
Approved
Hocine BELKHOUDJA
Date
15/04/08
Revision
1.01
27
File
CK5050+_Datasheet_1.03.doc
CE DECLARATION
We, Parrot SA 174 quai de Jemmapes 75010 Paris France, declare under our sole responsibility that our product
(Parrot CK5050+) is in conformity with the Radio and Telecommunication equipment directive 1999/5/EC R&TTE
according to the essentials requirements and respect the norms listed bellow :
3.1-a) Electrical Safety
EMF
3.1-b) EMC
3.2 Radio
EN60950-1:2001/A11:2004
EN50371 (06/2002)
EN301 489-17 V1.2.1
EN300 328 V1.7.1
Paris, September 9th , 2008
Qualification Manager
Arezki Guerrab
PROPRIETARY AND CONFIDENTIAL
The information contained in this document is the sole property of Parrot.
Any reproduction in part or as a whole without the written permission of Parrot is prohibited.
Project
CK5050+
Part Numbers
27
USB Connector
ANNEXE 1: CK5050+APPLICATION (example)
USB Connector
Drive Vbus
Drive Vbus
USB1_DRV_VBUS
USB1_VBUS
USB1_ID
USB1_D-
USB1_D+
USB0_DRV_VBUS
USB0_VBUS
USB0_ID
USB0_D-
USB0_D+
USB 2.0 OTG
I2S
MICBIAS
MIC1P
MIC1N
MIC2P
I2C
I2S
I2S_IN1
I2S_OUT
I2S_CLK
I2S
I2S_SYNC
P5+ Asic
SDRAM : 64 Mbits
Flash : 256 Mbits
Bluetooth 2.0 EDR
Power
I2S_MCLK
I2C
UART
Microcontroller
UART0
BOOTS
RIN
VSS
NRESET
LIN
UART1
MIC2N
VCC
MIC2
CDRW
Integrated MP3/WMA
DSP Audio Processor
ADC
MIC1
Apple
Authent.
IC
5V_USB
Parrot CK5050+
Microphones
I2C
I2C
Host AT commands and Flash Update
Debug Interface
Vss
Reset
LINE IN
BOOTS
UART
3.3V
GPIO
Audio input Selection : microphone inputs or Line In
28

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.3 (40-bit)
User Access                     : Print, Annotate, Fill forms, Extract, Assemble, Print high-res
Page Count                      : 28
Producer                        : GPL Ghostscript 8.54
Create Date                     : 2008:10:09 17:49:59+02:00
Modify Date                     : 2008:10:09 17:49:59
Title                           : CK5050+_Datasheet_1.03
Creator                         : PDFCreator Version 0.9.3
Author                          : v.leblanc
Subject                         : 
EXIF Metadata provided by EXIF.tools
FCC ID Filing: RKXCK5050PIA

Navigation menu