PARROT SOLO Wireless speaker User Manual Enter the help project title here
PARROT Wireless speaker Enter the help project title here
PARROT >
user manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1811458 |
| Application ID | 0e02mF1zXnmdTSKQ1tO5rA== |
| Document Description | user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 236.54kB (2956782 bits) |
| Date Submitted | 2012-10-10 00:00:00 |
| Date Available | 2012-11-29 00:00:00 |
| Creation Date | 2012-10-02 09:40:47 |
| Producing Software | wPDF3 by WPCubed GmbH |
| Document Lastmod | 2012-10-02 09:40:47 |
| Document Title | Enter the help project title here |
| Document Creator | Help & Manual 6 |
Quick start guide Guide d'utilisation rapide Parrot Zikmu Solo English ................................................................. 9 4 5 6 7 8 Quick start guide About this guide In order to limit our paper consumption and as part of our environmentally friendly and responsible approach, Parrot prefers to put user documents online rather than print them out. This simplified guide to the Parrot Zikmu Solo is therefore limited to providing you w ith the main instructions that w ill make it easy for you to use the device. More information can be found on the support section of our w ebsite, w w w .parrot.com: the full manual, FAQs, tutorials, and more. Contents Getting started iPod® Wi-Fi® Bluetooth® Jack Troubleshooting General information p.10 p.13 p.15 p.20 p.23 p.24 p.26 English Getting started Note : For the purpose of readability, the iPod touch® and iPhone® (in music mode) shall be designated by the term "iPod" in this manual. Compatible telephones or tablet PCs shall be designated by the term "Smartphone". Connection to mains supply Plug the speaker into an electrical outlet using the provided pow er cable (diagram p.4). >The speaker turns on automatically. The icon blinks for a few seconds then becomes steady. Remote control Insert the provided remote control battery into the specific battery compartment (diagram p.4). Note : Use only a CR2032 battery. 10 English Turning the Parrot Zikmu Solo on / off Press the of the remote control or control panel to turn the speaker on / off. Removing the front grid Wi-Fi, Bluetooth and Reset buttons are accessible by removing the magnetic Parrot Zikmu Solo front grid (diagram p.5). English 11 Button Function Short press : Establish Wi-Fi connection w ith a modem / router supporting WPS technology (refer to the Wi-Fi > Connection w ith WPS section). Long press : Reset Wi-Fi and ethernet parameters. Short press : Make the Parrot Zikmu Solo visible via Bluetooth. Press this button before connecting a Bluetooth device to the speaker for the first time (refer to the Bluetooth > C onnec tion s ec tion). Long press : Delete all pairings (except the one of the currently connected device). Reset Reboot the speaker. Selecting an audio source The Parrot Zikmu Solo allow s you to use several types of audio sources: computer connected via Wi-Fi, computer or Smartphone connected via Bluetooth, iPod/iPhone, analogue audio player, TV or DVD player w ith an optical audio output. 12 English Press the SOURCE button of the remote control to sw itch among the active audio sources. If you start playing a music file from a second source, this source is automatically selected. The music currently played from the first source is automatically suspended except if the first source is an analogue audio player connected via a Jack cable. Controlling the volume Button Function Increase the volume. Decrease the volume. English 13 iPod Note : Refer to the Parrot Zikmu Solo support page for more information about the compatible iDevice models. Using the dock adapter Tw o dock adapters provided w ith the Parrot Zikmu Solo allow you to use the speaker w ith iPhone 4S / iPhone 4 and iPhone 3GS / iPhone 3G. To use the Parrot Zikmu Solo w ith another iDevice, use the dock adaptor supplied w ith the Apple device. To insert the dock adapter, position it above the connector and press on both sides. Connecting the iPod Once the dock adapter is inserted on the speaker: 1. Unplug the earphones from your iPod. 2. Connect your iPod to the speaker (diagram p.6). >The iPod battery charges until it is fully charged. 14 English > You can now brow se for a song on your iPod. Downloading the application Login to the App StoreSM or Google Play ® and dow nload the free Parrot Audio Suite application. This application w ill allow you to modify several audio settings and connect the speaker to your Wi-Fi netw ork easily. English 15 Wi-Fi Before you begin You can stream music via Wi-Fi to the Parrot Zikmu Solo from any computer w ith the follow ing operating systems : Window s ® XP (SP2 or SP3), Window s Vista® , Window s ® 7 and Mac OS X 10 (and later versions). To stream music via Wi-Fi on the Parrot Zikmu Solo w hile keeping an internet connection, you need to have a w ireless access point and to connect the Parrot Zikmu Solo to your Wi-Fi netw ork. If you do not need an Internet connection on the computer you are using w ith the Parrot Zikmu Solo, you can simply connect it to the Wi-Fi netw ork generated by the Parrot Zikmu Solo: SoloNet-xx.xx. Note : The performance of the Parrot Zikmu Solo depends highly on the performance of your modem / router. The sound quality of the Parrot Zikmu Solo may be affected if there is an obstacle or a wall between the speaker and your modem / router. Reposition your speakers if necessary. There are several w ays to connect the Parrot Zikmu Solo to your Wi-Fi netw ork. The detailed connection procedures are available on the Parrot Zikmu Solo 16 English complete user guide on our w ebsite w w w .parrot.com. Connection with WPS If your modem / router supports the WPS technology: 1. Press the WPS button on your modem / router. Refer to the documentation of your device for more information. 2. Press the button on the Parrot Zikmu Solo located behind the grid. > The green light located next to this button blinks. It remains steady once the connection is established. Connection with an RJ45 cable Note : The RJ45 cable, also called ethernet cable, is not provided with the Parrot Zikmu Solo. 1. Connect your computer to the Parrot Zikmu Solo using an RJ45 cable (diagram p.8). 2. On your computer, launch your w eb brow ser and enter http://zikmusolo.local/w ifi in the address bar. > The list of available Wi-Fi netw orks w ill be displayed. 3. Select your Wi-Fi netw ork. English 17 4. Enter the WEP / WPA / WPA2 key if necessary then click on Apply. Connection with an iPhone If you have an iPod Touch 2G (or later version) or iPhone 3 (or later version): 1. Login to the App StoreSM and dow nload the Parrot Audio Suite free application. 2. Install your iPhone on the Parrot Zikmu Solo (diagram p.6) or connect it to the speaker via Bluetooth (refer to the Bluetooth > Connection section). 3. Launch the Parrot Audio Suite application and press Wi-Fi. > The list of available Wi-Fi netw orks w ill be displayed. 4. Select your Wi-Fi netw ork. Enter the WEP / WPA / WPA2 key if necessary. 5. Press Join. > The Parrot Zikmu Solo is now connected to your Wi-Fi netw ork. Manual connection The Parrot Zikmu Solo creates a Wi-Fi netw ork by default. You can connect your computer or Smartphone to this netw ork in order to connect the Parrot Zikmu Solo to your Wi-Fi netw ork. Note : If the Parrot Zikmu Solo has already been connected to a Wi-Fi network, it will 18 English not create its own Wi-Fi network. To do so, you first need to reset the Parrot Zikmu Solo Wi-Fi parameters by holding down the button for 2 seconds. 1. On your computer, scan for available Wi-Fi netw orks. 2. Join the "SoloNet-xx.xx" Wi-Fi netw ork (as if you w ere trying to establish a connection w ith a router / modem). Note : You will temporarily lose your Internet access. You can reconnect your computer to your Wi-Fi network at the end of this procedure. 3. Launch your w eb brow ser on your computer or Smartphone and enter http://zikmu-solo.local (or http://[new -name].local if you changed the speaker name) in the address bar. 4. Click on Wi-Fi Configuration. > The list of available Wi-Fi netw orks is displayed. 5. Select your Wi-Fi netw ork. 6. Enter the WEP / WPA / WPA2 if necessary then click on Apply. Using the web interface The Parrot Zikmu Solo w eb interface allow s you to control the playback of your audio files and modify several audio settings. You can access this interface from your computer, Smartphone or tablet. English 19 1. Connect the Parrot Zikmu Solo to your Wi-Fi netw ork using one of the previously described methods. 2. On your computer or Smartphone, launch your w eb brow ser. 3. Enter http://zikmu-solo.local (or http://[new -name].local if you changed the speaker name) in the address bar. Note : For more information about the web interface, refer to the corresponding tutorial available on the Parrot Zikmu Solo support page on our website www.parrot.com. 20 English Bluetooth Using the Parrot Zikmu Solo with a Smartphone You can listen to music tracks stored on your Smartphone via the Parrot Zikmu Solo. Your Smartphone must support the Bluetooth® A2DP profile (Advanced Audio Distribution Profile). Note: Depending on the model of your phone, you may need to authorize the connection to the Parrot Zikmu Solo to allow further automatic connections. Refer to the user guide of your phone for more information. Using the Parrot Zikmu Solo with a computer You can stream music via Bluetooth to the Parrot Zikmu Solo from any PC supporting Bluetooth technology and MAC OS X 10 (and later versions). The detailed connection procedure depends on your computer and the Bluetooth softw are you are using. For more information, refer to your device user guide or to the Parrot Zikmu Solo complete user guide on our w ebsite w w w .parrot.com. English 21 Connection If you are using the Parrot Zikmu Solo w ith your Smartphone or computer, you need to connect both devices. But if you are using your Smartphone or computer w ith the Parrot Zikmu Solo for the first time, you need to pair both devices before connecting them. The pairing process is only necessary once. 1. Turn on the Parrot Zikmu Solo. 2. Remove the front grid (diagram p.5). 3. Press the button. > The blue light located next to the button starts blinking. The Parrot Zikmu Solo is now visible by the other Bluetooth devices for tw o minutes. 4. From your Smartphone or computer, launch a Bluetooth peripherals search. 5. Select « Zikmu-Solo ». 6. If your Smartphone or computer asks you to enter a Bluetooth PIN code, enter “0000”. > The Parrot Zikmu Solo is now paired w ith your device. You can place the front grid back on the speaker. 7. Connect both devices. > You can now start playing the track on your Smartphone or computer and 22 English the sound w ill come through the speaker. If your Smartphone supports the NFC function, connection is also possible by touching the Parrot Zikmu Solo dock connector (diagram p.8). The area of the Smartphone w hich needs to touch the speaker depends on the phone model. Refer to your Smartphone user guide for more information. English 23 Jack You can connect your analogue audio player (ex: CD player, TV) to the Parrot Zikmu Solo via a jack / jack cable to stream music. To do so, connect the cable to the jack connector located under the speaker (diagram p.7) and start playing a track. If you w ish to connect the Parrot Zikmu Solo to an audio player w ith an optical audio output (TV or DVD player), use the provided toslink / jack adapter (diagram p.7). Note : Make sure that the connectors are inserted properly to avoid any disruption. Note : To avoid any problem of sound saturation, increase the volume on the Parrot Zikmu Solo rather than on your audio player. The audio mixer available on the Parrot Audio Suite application allows you to define a volume level by default for each source to avoid problems such as a too high volume level after an audio source change. 24 English Troubleshooting Resetting the Parrot Zikmu Solo If you have already configured your Parrot Zikmu Solo for Wi-Fi use and w ant to reset the Wi-Fi parameters to their factory settings, remove the front grid (diagram p.5) and hold dow n the button. If you are having an issue w ith an audio player connected to the Parrot Zikmu Solo via Bluetooth: 1. Turn off the audio player. 2. Remove the front grid (diagram p.5) and hold dow n the button. 3. Reestablish the Bluetooth connection betw een the Parrot Zikmu Solo and the audio player. If you are having an issue w ith your Parrot Zikmu Solo and need to reboot the speaker, remove the front grid (diagram p.5) and press the Reset button. If you w ant to restore the Parrot Zikmu Solo factory settings, hold dow n the button. English 25 Note: These resets can also be done using the Parrot Audio Suite application. Pairing the remote control If the Parrot Zikmu Solo remote control does not seem to w ork : 1. Make sure the battery is correctly installed (diagram p.4). 2. Restart the Parrot Zikmu Solo. 3. Press the SOURCE and buttons simultaneously. You have one minute to perform this action once the Parrot Zikmu Solo is turned on. Software update Make sure you have the latest softw are update on your Parrot Zikmu Solo. Using the Web interface you can easily identify w hether a new softw are update is available. If you require an update 'click' to dow nload and install the latest version. You can also check the softw are version displayed information if you have an iPod. To do so, install the iPod on the Parrot Zikmu Solo, then select Settings > General > Information if you have an iPhone or Settings > Information if you have an iPod. Brow se through the displayed informations until "Parrot Zikmu Solo by Starck" is displayed. 26 English Compatibility If your phone does not seem to w ork w ith the Parrot Zikmu Solo, refer to the compatibility page on our w ebsite to check if your phone is compatible w ith the Parrot Zikmu Solo and to consult the corresponding pairing procedure : w w w .parrot.com/uk/compatibility. For more information Refer to the Parrot Zikmu Solo on our w ebsite : w w w .parrot.com/uk/support/ parrot-zikmu-solo. English 27 General information Warranty Without prejudice of legal w arranty, Parrot products are w arranted during 1 year from the date of purchase for defects in materials and w orkmanship, provided that no deterioration to the product has been made, and upon presentation of proof of purchase (invoice) to the retailer. Warranty does not cover: upgrading of the softw are items of the Parrot products w ith Bluetooth cell phones for compatibility purpose, data recovery, deterioration of the external aspect due to normal w ear of the product, any damage caused by accident, misuse, misapplication, or non-Parrot products. Parrot is not responsible for storage, loss or damaged to data during transit or repair. Any product w rongfully declared to be defective w ill be returned to sender and inspection, process and carriage costs w ill be invoiced to him. Correct disposal of This Product (Waste Electrical & Electronic Equipment) This marking 28 English show n on the product or its literature, indicates that it should not be disposed w ith other household w astes at the end of its w orking life. To prevent possible harm to the environment or human health from uncontrolled w aste disposal, please separate this from other types of w astes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer w here they purchased this product, or their local government office, for details of w here and how they can take this item for environmentally safe recycling. Business users should contact their supplier and the terms and conditions of the purchase contract. This product should not be mixed w ith other commercial w astes for disposal. Modifications The explanations and specifications in this guide are given for information purposes only and may be modified w ithout prior notice. They are deemed to be correct at time of going to press. The utmost care has been taken w hen w riting this guide,as part of the aim to provide you w ith accurate information. How ever, Parrot shall not be held responsible for any consequences arising from any errors or omissions in the guide, nor for any damage or accidental loss of data resulting directly or indirectly from the use of the information herein. Parrot reserves the right to amend or improve the product design or user guide w ithout any restrictions and w ithout any obligation to notify users. As part of our English 29 ongoing concern to upgrade and improve our products, the product that you have purchased may differ slightly from the model described in this guide. If so, a later version of this guide might be available in electronic format at Parrot’s w ebsite at w w w .parrot.com. Registered Trademarks Parrot, Parrot Zikmu Solo and the Parrot logo are registered trademarks of PARROT SA. The Bluetooth ® w ord mark and logos are registered trademarks ow ned by Bluetooth SIG, Inc. and any use of such marks by Parrot S.A. is under license. Bluetooth QDID : B013841, B013839, [-] iPod, iPhone, Mac and Apple are trademarks of Apple Inc, registered in the US and others countries. Window s XP, Window s Vista and Window s 7 are registered trademarks of Microsoft Corporation in the US and other countries. Wi-Fi ® is a registered trademark of the Wi-Fi Alliance. The Wi-Fi CERTIFIED logo is a certification mark of the Wi-Fi Alliance. Google Play is a trademark of Google Inc. 30 English All other trademarks mentioned in this guide are protected and are the property of their respective ow ners. Declaration of Conformity We, Parrot S.A. of 174 quai de Jemmapes, 75010 Paris, France, declare under our sole responsibility that our product, the Parrot Zikmu Solo speaker to w hich this declaration relates are in conformity w ith appropriate standards EN300328, EN300220, EN301489-17, IEC60065 follow ing the provision of EMC 204/108/ EEC, electrical security 2006/95/CE and R&TTE 1999/5/EC directives. Identification N. 394 149 496 R.C.S. PARIS Parrot S.A. Copyright © Parrot 2012. All rights reserved. This device complies w ith Part 15 of the FCC Rules. Operation is subject to the follow ing tw o conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that English 31 may cause undesired operation of the device FCC RF Radiation Exposure Statement: This equipment complies w ith FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated w ith minimum distance 20cm betw een the radiator & your body. This transmitter must not be co-located or operating in conjunction w ith any other antenna or transmitter. FCC Compliance Statement This equipment has been tested and found to comply w ith the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance w ith the instructions, may cause harmful interference to radio communications. How ever, there is no guarantee that interference w ill not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, w hich can be determined by turning the equipment off and on, the user is 32 English encouraged to try to correct the interference by one or more of the follow ing measures: - Reorient or relocate the receiving antenna. - Increase the distance betw een the equipment and receiver. - Connect the equipment to an outlet on a circuit different from that to w hich the receiver is connected. IC Compliance Statement This equipment has been tested and found to comply w ith the limits for a Class B Digital Device, w ith Industry Canada Licence-exempt RSS-GEN 7.1.3. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance w ith the instructions, may cause harmful interference to radio communications. How ever, there is no guarantee that interference w ill not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, w hich can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the follow ing measures: English 33 - Reorient or relocate the receiving antenna. - Increase the distance betw een the equipment and receiver. - Connect the equipment to an outlet on a circuit different from that to w hich the receiver is connected. Important safety instructions WARNING : To reduce the risk of fire or electric shock , do not expose this apparatus to rain or moisture. 1. Read these instructions. 2. Keep these instructions. 3. Heed all w arnings. 4. Follow all instructions. 5. Do not use this apparatus near w ater. 6. Clean only w ith dry cloth. 7. Do not block any ventilation openings. Install in accordance w ith the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A 34 English polarized plug has tw o blades w ith one w ider than the other. A grounding type plug has tw o blades and a third grounding prong. The w ide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the pow er cord from being w alked on or pinched particularly at plugs, convenience receptacles, and the point w here they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Unplug this apparatus during lightning storms or w hen unused for long periods of time. 13. Refer all servicing to qualified service personnel. Servicing is required w hen the apparatus has been damaged in any w ay, such as pow er-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 14. Do not expose this apparatus to dripping or splashing and ensure that no objects filled w ith liquids, such as vases, are placed on the apparatus. 15. To completely disconnect this apparatus from the AC Mains, disconnect the pow er supply cord plug from the AC receptacle. 16. The pow er cord w hich provides disconnection from mains supply shall remain readily operable. Unplug this apparatus w hen unused for long periods of English 35 time. 17. Do not expose batteries to excessive heat such as sunshine, fire or the like. 18 . Do not dismantle the speakers and do not remove any screw of the device. Maximum temperature: 40°C 36 English FCC ID : RKXSOLO IC: 5119A-SOLO
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 40 XMP Toolkit : 3.1-701 Creator Tool : Help & Manual 6 Create Date : 2012:10:02 09:40:47Z Modify Date : 2012:10:02 09:40:47Z Metadata Date : 2012:10:02 09:40:47Z Format : application/pdf Title : Enter the help project title here Description : Subject : Creator : Version ID : 1 Document ID : uuid:21c17e718ee89b428130ba9f446fab86 Instance ID : uuid:21c17e718ee89b428130ba9f446fab86 Keywords : Producer : wPDF3 by WPCubed GmbH Page Mode : UseOutlines Author :EXIF Metadata provided by EXIF.tools