PAX Technology PX7BW Multi-Lane Payment Terminal User Manual

PAX Technology Limited Multi-Lane Payment Terminal Users Manual

User manual

Reset Button and Audio Jack7Reset Button and Audio Jack Mounting Slots ResetButton Audio Jack If required, restart the terminal by pressing in and holding the reset button for 2-3 seconds.Cable Lock8Cable LockIf required, insert customer-provided cable lock into K-Slot®. Loop cable around permanent object to secure in place.Stand Installation9Stand InstallationPAX TECHNOLOGY INC.Stylus PortIf required, a visually disabled person can connect a headphone to the terminal for audio prompting using the 3.5mm output audio jack.Route CablesxIf required, the P terminal may be mounted to a stand. Instructions may vary depending on stand specifications.Carefully route the required cables up through the stand pipe and out the top. Connect the cables to the xP terminal ports.Insert the three mounting slots on the underside of the terminal into the three metal prongs on the stand base.Slide the terminal firmly into position, locking the terminal in place on the stand. Secure with fastening screw or locking device as required.PAX TECHNOLOGY INC.Power ConnectionsPower Connections3PAX TECHNOLOGY INC.Communication ports are labeled and color-coded:Green Blue Black Yellow Red WhiteProduct DescriptionProduct DescriptionStylus penTouch screenMagnetic stripe readerContactless readerPrivacy shieldKeypadSmart card readerCable retention clipsCommunication portsSpeakersMAC address labelRegulatory labelCommunication modulePart number/serial number label

Navigation menu