PAX Technology S90WCDMA Wireless POS terminal User Manual S90 E 20130509

Download:
Mirror Download [FCC.gov]
Document ID	1961836
Application ID	iYd1vCm2t601NMfgQ3eumA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	318.24kB (3977946 bits)
Date Submitted	2013-05-10 00:00:00
Date Available	2013-11-07 00:00:00
Creation Date	2013-05-09 03:04:26
Producing Software	Corel PDF Engine Version 3.0.0.667
Document Lastmod	2013-05-09 03:04:26
Document Title	S90-E英文说明书20130509
Document Creator	CorelDRAW
Document Author:	sunxx

® .
@341 x Installation Manual
890
Mobile Payment Terminal
P/N~200312000000142
PAX TECHNOLOGY LIMITED reserves
the right in change prnduct lechnolngy
specifications without notifying.
00:.41"
FAX TECHNOLOGY LIMITED
Room 2416, Z4’F., Sun Hung Km Centre, 30
Harbour Road. Wanchai. Hong Kong
Tel: #6272588 8808 Fax: *KSZVZKOZ 3300
Frmafl, d4nlsl@pux cum hk
“"5““: WW“ Pam“ bk PAX TECHNOLOGY L‘MITED
®
@m
Appearance Description
mummymm.
mm
mmumwumm
mammopmu
Lwnunm
Acmmummmae v.1
mum“
m (muse; imam”,
AYM alv‘emvumn
3m
ngnchziuw
camsm
(Mme
\rd‘ra'm
mmm
mm
nun-w 7
mm;
gym ,
Figure 2: Baltom View
\ inmvavrc
\ w,
Veepwanr m/
K;727
Lyman” /
Figure 3: Side View
5mm
WSIM Cam Slnls
®
@m
Installation
1) SAM Card Installation
tt Open up battery cover, whtch ts at the bottom at the
termtnal, 2 Take out battery, ti: lnsert SAM card to
correspondth SAM card slot.
2) SIM/UIM Card lnstallation
tt Open up battery cover, whtch ts at the bottom ol the
termtnal, :2; Take out battery. ti: lnsert SlM/ulM card to
correspondtng SlM/UlM card slot
3) Battery lnstallatton
’i, Hold the battery wtth tts sttcker tactng up. 2‘ Attach
battery torelock to battery bayonet, :3; Press down the
other side at the battery
Instructions
1 Power ON/FF
Power 071' Press power swttch button tar 2 seconds unttl LED
backltght ts on, and the buzzer wtll beep tl P05 ts betng turned
on successtully,
Power otl Press power swttch botton tor 2 seconds unttl the
dtsplaytng content vantshes. POS ts being turned ott.
2 Magnettc Smpe Card
When user swtpes magnettc strtpe card along the slot, the
backstde ol the card, which contatns magnetic strtpe
tnlarmatton, should be lactng to the termtnal. at-dtrecttonal
swtptng ts supported lt is recommended to swtpe starttng lrorn
the top ot the termtnal to the bottom at the termtnal, wtth a
constant movtno speed,
3 to card
When user tnserts to card tnto the lc slot, the chtp ol lc card
should be lactng up, user ts recommended to gently tnsert the
card, tn orderto avotd any phystcal damage to the card or the
to slot ot the termtnal lt lc card ts successlully read by the
termtnal, the lc card tcon wtll be shown on LCD dtsolay screen
4 Teartng ott recetpt trom the terminal
Atter the recetpt ts prtnted ptnch the end ol the recetpt and
keep an angle oma degrees between recetpt and the cutter ol
the termtnal, tear oll the receipt swiflly
Specification
Basic configuration
CPU azebtt, ARMH
Memory 128MB FLASH, 64MB DDR
Dtsplay 123x64 ptxel LCD, LED backltght
Keypad 1o alphanumenc keys, 3 runctton
keys» ATM keys and t swttch [0N]
key
Magnettc Card Reader Track l/z/a. bt-dtrecttonal swtpe
lc Card Reader 1 user card (EMVZDDU)
SAM Slots 2, Isomls
Communtcatlon GPRstGSM) CDMA WCDMA or
thltselect one otlour opttons)
Modern Sync SDLC, baud rate
1200/2A00/9600bps
Asnyc v.92, (up to 56Kbps)]
t R5232, 1 power charge port, tusa
port, 1 Ltne port,
Pertpheral Ports
Pnnter Thermal pnnter, Speed 12 5 ltneslsec
Paper wtdth 58mm
Battery LHorl battery, tsoomAh, 7.4V
Power Supply lnput tou~2AOVAc soHumHzt 0A,
Output 9 5VDC 4A
Worklng Enytronment Temperature, 0' -50‘(‘(32T~122T)
R H'1D%~93%(nanecondense)
®
@m
Storage Envlronmerll Temperaturekzo tz~7o (:(741‘458’1‘)
R H 5%~95%(nonecondense)
Dlmensluns 197mm X 57mm x 61 5mm (L X W X H)
Weight 4869(altached with battery)
Optional
1) Function otcontactless reading card (ISO/IEC 14443 Type
NB, Milare ®, Fellcai wrtn indicator lamps lor state ot
reading card The card sensing area LCD screen)
2) Function otdual SW
3) Function or Scanning one - dimensional barcodes
4)Accessories with leather casing cnarging docki car Jack
cnarger
Terminal Installation and Usage Tips
930 not damage electric wire and power adapter, lleleclric
wire or power adapter is damaged, please do not use the
terminal any more
2) Belore power adapter is plugged into power socket, please
make sure tnat vollage wnicn tne power socket supplies is
appropriate working voltage tor tne terminal
3) Do not expose tne terminal in sunshlnei or in humldi not, or
dusty environment
A) Keep the terminal away trom liquid material
5) Do not plug any unknown material into any port attne
terminal, since l| may create serious damage to ma
terminal
6) lltne terminal is defective please contact protessional POS
repairtectinicrans.
7) When installing paper roll. please be aware althe cutter
wilnin paper bracket
5) Please use standard tneimal paper in order to protect the
printer and avoid paperlam.
9) Do not assemble the terminal in explosion nazardous area
t)
2>
3)
4)
5>
6)
7>
In
9)
Battery Usage Tips
cnarge indoor by FAX chargen wnere is cool and well
ventilated.
Do not apart tne battery.
Do not snort circuit tne ballery‘
Keep tne battery away lrom sunsmne, smog and dust.
Do not squeeze puncti tne battery put l| into liquid or nearl’lre‘
Keep way lrom environment wnion is too not too cold‘ damp
and nignly explosive
Once a tailure nappens such as heating or dlslarllcrli or it was
broken clawrl‘ Please change new battery;
cnange new battery it it cannot sallsfy your requirement
cnange new battery it using more tnan two years
Any cnanges ctr modifications not expressly approved by tne party
responsible lor compliance could VDld tne users authority to
operate tne equipment,
Tnis devlce complies Witn part ts oltne FCC Rules Operaliori is
subiect to tne (allowan two conditions (tlTnis devlce may not
cause narmtul interterenoe, and (2) this deVioe must accept
any interterence received, including interlerence that may
cause undesired operation
Tnis devlce nas been tested and lound to comply With the limits lor
a Class B dlgl|al device pursuam (D Part ’lS DI the FCC Rules
Tnese limits are designed to provide reasonable protection
against narmlul interference in a residential installation We
equipment generates uses and can radiated radio lreouency
energy and‘ ll not installed and used lrl accordance wllh lhe
instructions may cause narmrul interrerence to radio
communications. Howeven tnere is no guarantee tnat
inlerterenoe will not occur in a particular installation lltms
equipment does cause narmlul interlerence to radio or
teleVision reception, wnicti can be determined by turning the
equipment on and om tne user is encouraged to try to correct
tne inlerterence by one or more oltne tollowmg measures
-Reonent or relocate tne recewing antenna
®
@m
rlncrease the separation between the equipment and receiver
rConned the equipment into an outlet on a circuit ditlerent trom
that to which the receiver is connected
-Consult the dealer oran experienced radio/TV technician tor help.
Customer Informat on
This equipmentcomplies With Fan as cHhe FCC rules and the
requirements adopted py the ACTA 0n the bcuom oi this
equipment is a lapel that contains, among other intormation, a
product identifier in the rormat USFAXMMDDBSQO ll requested,
this numtier must he provided to the telephone company,
This equipment uses the following usomacks Rmc
Aplug and lack used to connect this equipment to the
premises vviring and telephone network must comply with the
applicable FCC Part as rules and requirements adopted by the
ACTA Acompliant telephone cord and modular plug is provided
With this product it is designed to be connected to a compatible
modularyack that is also compliant See lns|aHallon lns|ruc|lons lor
details,
The REN is used to de|ermtne |he number a! devices that may
be connected to a telephone line Excessive RENs on a telephone
line may result in the devices not ringing in response to an
incoming call in most but notall areas, the sum oi RENs should
no| exceed Ilve (5 D) To be cenairl of me number a! devices that
may be connected to a line, as determined oy the total RENs,
contact the local telephone company, For products approved alter
July 23, 2001, the REN tor this product is part oi the product
identifier tha| has the lorma| US PAXMMUDBSQO The dlglts
represented by M are the REN Without a decimal point (e o, 03 is
a REN olo,3)
Foreailier products, the REN is separately shown on the laoel
llthis equipment us PAXMMDOESSO causes harm to the
telephone network, the telephone company vvill notify you in
advance that temporary discontinuance or service may be
required But it advance notice isn't practical, the telephone
company will notily the customer as soon as posstble Also, you
Will he advised or your right to file a complaint With the FCC it you
believe it is necessary.
The telephone company may make changes in its lacilities,
equipment, operations or procedures that could atlect the
operation at the equipment llthis happens the telephone
company will provide advance notice in orderror you to make
necessary modifications to maintain uninterrupted service
lltrpuple is experienced With this equipment
us PAXMMDUESQO, tor repair or warranty intormation, please
contact FAX Technology Inc, 631247-9660 It the equipment is
causing harm to the telephone network, the telephone company
may request that you disconnect the equipment until the proolem
is resolved
Connection to party line sen/toe is sumac! to state tariits
contact the state public utility commission, puolic service
commission or corporation commission tor intormation,
llyour home has specially vvired alarm equipment connected
to the telephone line, ensure the installation olthis
US PAXMMOOBSSO does not disaole youralarm equipment liyou
have questions apoutwhatiivill disable alarm equipment, consult
your telephone company or a qualified installer
RF Exposure Informat on (SAR
This device is designed and manulactured not to exceed the
emission limits torexposure to radio trequency (RF) energy set by
the Federal Communications Commission or the United states.
During SAR testing, this device was set to transmit at its
highest certilied power level in all tested trequency oands, and
placed in positions that simulate RF exposure in usage near the
pody With the separation oi 0 mm Although the SAR is determined
at the highest certified power level, the actual SAR level oi the
device while operating can be well oelow the maximum value
This is because the device is designed to operate at multiple
power levels so as to use only the power required to reach the
®
3%”
network \n genera‘, me c‘oser you are ro a wrreless base srauon
amenna‘ me \owerme powerompur
Tne exposure srandaro (or wrreless dewces emp‘oymg a um
or measuremenr rs known as rne Speechosorprron Rare, or
SAR The SAR nnur se| by rne FCC rs 1 6W/kg
ans dewce rs camphed wrm SAR lorgeneral popmanon
luncamroHed exposure hmns m ANSUIEEE 595 1-1992 and nad
been tested m accnrdance with me measurement melhads and
oroeeoures soeomed m OET Buueorr 65 Suppremenr c ans
devlce nas been remedy and mee|s the FCC, wnen resred won the
device drreouy oomaered m rne body.
For W5 devroe for usage near me body rs 1 aowrxg
Whl‘e there may be drflerences helween the SAR lavas CH
vanous oevrces and or vanous pusmons‘ may aH rneer me
gavernmem reourrernenrs
SAR comphance tor bodysworn operauon rs based on a
separauon drsrance cf 0 mm between me unrr and me human
body. Carry rnrs devme or \easl 0 mm away Vrom your body to
ensure RF exposure lever campham or \nwer |o rne reported \evel
RF exposure comphance wrm any body-worn accessory, wnron
comams me|aL was not |es|ed and oenmed, and use suon hndyr
worn accessory shou‘d oe evmded

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 6
Create Date                     : D:20130509030426
Modify Date                     : D:20130509030426
Producer                        : Corel PDF Engine Version 3.0.0.667
Author                          : sunxx
Creator                         : CorelDRAW
Title                           : S90-E英文说明书20130509
GTS PDFX Version                : PDF/X-3:2002
Trapped                         : False

EXIF Metadata provided by EXIF.tools