PBE Europe as Axell Wireless 80-330555 Q115525 Private Land Mobile Repeater User Manual 80 330501HBKM
Axell Wireless Q115525 Private Land Mobile Repeater 80 330501HBKM
Manual
22. INTERNATIONAL STATION 800MHZ BDA (80-330555-1) Rack number CR9-CR-07 International Station 800MHz BDA (80-330555-1) Section 22.3.1. 22.3.2. Component Component Part Description Part 50-132203 800MHz Output Quadplexer/Combiner 50-132205 800MHz 5 Cavity Combiner System Qty Per Assembly STTRS DOCUMENTATION Document Number 80-330501HBKM – Issue A - Draft Page 408 of 500 22.1. International Station 800MHz BDA (80-330555-1) Rack elevation Drawing number 80-330555 STTRS DOCUMENTATION Document Number 80-330501HBKM – Issue A - Draft Page 409 of 500 22.2. International Station 800MHz BDA (80-330555-1) System diagram Drawing number 80-330585-1 STTRS DOCUMENTATION Document Number 80-330501HBKM – Issue A - Draft Page 410 of 500 22.3. International Station 800MHz BDA (80-330555-1) Major Components 22.3.1. 800MHz Output Quadplexer/Combiner (50-132203) 3U rack mount tray 800MHz Output Quadplexer/Combiner (50-132203) List of major Components Section 22.3.1.3. 22.3.1.4. 22.3.1.5. 22.3.1.6. Component Part 02-007206 05-003007 07-015105 09-000902 Component Part Description Bandpass Filter 4 Port Hybrid Coupler Wideband Asymmetric Coupler Dummy load Qty Per Assembly STTRS DOCUMENTATION Document Number 80-330501HBKM – Issue A - Draft Page 411 of 500 22.3.1.1. 800MHz Output Quadplexer/Combiner (50-132203) Outline Drawing Drawing number 50-1322103 STTRS DOCUMENTATION Document Number 80-330501HBKM – Issue A - Draft Page 412 of 500 22.3.1.2. 800MHz Output Quadplexer/Combiner (50-132203) System Diagram Drawing number 50-132283 STTRS DOCUMENTATION Document Number 80-330501HBKM – Issue A - Draft Page 413 of 500 22.3.1.3. Bandpass Filter (02-007206) The bandpass filters are multi-section designs with a bandwidth dependent upon the passband frequencies, (both tuned to customer requirements). The response shape is basically Chebyshev with a passband design ripple of 0.1dB. The filters are of slot coupled, folded combline design, and are carefully aligned during manufacture in order to optimise the insertion loss, VSWR and intermodulation characteristics of the unit. The tuned elements are silver-plated to reduce surface ohmic losses and maintain a good VSWR figure and 50Ω load at the input and output ports. Being passive devices, the bandpass filters should have an extremely long operational life and require no maintenance. Should a filter be suspect, it is usually most time efficient to replace the module rather than attempt repair or re-tuning. No adjustments should be attempted without full network sweep analysis facilities to monitor both insertion loss and VSWR simultaneously. 02-007206 Specification PARAMETER Response type Frequency range Bandwidth Number of sections Insertion loss VSWR Connectors Power handling Temperature operation range storage Weight SPECIFICATION Chebyshev 800 - 950MHz * 25MHz * 1.2 dB better than 1.2:1 SMA female 100W max -20°C to +60°C -40°C to +70°C 3 kg (typical) *tuned to Customer's specification 22.3.1.4. 4 Port Hybrid Coupler (05-003007) This transmitter hybrid coupler is a device for accurately matching two or more RF signals to single or multiple ports, whilst maintaining an accurate 50Ω load to all inputs/outputs and ensuring that the insertion losses are kept to a minimum. Any unused ports should be terminated with an appropriate 50Ω load. In this specific instance one port of 4 Port Hybrid Coupler (05-003007) is terminated with Dummy load 09-000902 (see below). 05-003007 Specification PARAMETER Frequency range Bandwidth Rejection Insertion loss Connectors Weight Temperature operational range storage SPECIFICATION 700-900MHz 200MHz >14dB 6.5dB (in band, typical) SMA <1.0kg -10%C to +60%C -20%C to +70%C STTRS DOCUMENTATION Document Number 80-330501HBKM – Issue A - Draft Page 414 of 500 22.3.1.5. Wideband Asymmetric Coupler (07-015105) The purpose of Wideband Asymmetric Coupler (07-015105) is to tap off a known portion (in this case 30dB) of RF signal from transmission lines and to combine them, for example through splitter units for different purposes (alarms/monitoring etc.), whilst maintaining an accurate 50Ω load to all ports/interfaces throughout the specified frequency range. They are known formally as directional couplers as they couple power from the RF mainline in one direction only. 07-015105 Specification PARAMETER Construction Frequency Through loss Coupling level Isolation Weight Connectors Temperature operation range storage SPECIFICATION Inductive air gap 800-2500MHz 0.4dB (typical) -30dB ±0.5dB N/A <1.0kg SMA, female -20°C to +60°C -40°C to +70°C 22.3.1.6. Dummy load 09-000902 When a combiner system is used to split or combine RF signals, in many cases it is most cost effective to use a standard stock item 4, 6 or 8 port device where, in fact, only a 3 or 6 port device is needed. In this case 4 Port Hybrid Coupler (05-003007) has one of its ports terminated with an appropriate Dummy Load in order to preserve the correct impedance of the device over the specified frequency range. 09-000902 specification PARAMETER Frequency Range Power Rating VSWR Impedance Temperature Range RF Connectors Dimension Weight Finish RF Connector Environmental MTBF SPECIFICATION 0 - 2500 MHz 25 Watts continuous Better than 1.1:1 50 Ohms -20 to +60°C N Type female 110.3mm x 38.1mm x 485 grams Black Anodised N Type male IP66 >180,000 hours STTRS DOCUMENTATION Document Number 80-330501HBKM – Issue A - Draft Page 415 of 500 22.3.2. 800MHz 5 Cavity Combiner System (50-132205) 800MHz 5 Cavity Combiner System (50-132205) consists of 5 Dielectric Cavity Resonators mounted on two 3U rack mount panels, three on one panel and two on the other 800MHz 5 Cavity Combiner System (50-132205) List of Major Components Section 22.3.2.3. Component Part 04-003401 Component Part Description Dielectric Cavity Resonator Qty Per Assembly STTRS DOCUMENTATION Document Number 80-330501HBKM – Issue A - Draft Page 416 of 500 Document Number 80-330501HBKM – Issue A - Draft 265.9 6U 265.9 6U 190.50 37.7 190.50 37.7 AA ORIGINAL ISSUE PL 26/10/2007 GD PL MATERIAL - FRONT PANEL & CHASSIS - ALUMINIUM FINISH - FRONT PANEL - IRIDITE FRONT PANEL - PAINTED RAL7035 (FRONT FACE & EDGES) CONNECTORS - `N' TYPE SOCKET PRODUCT NUMBER : 50-132205 466.00 482.50 26/10/2007 PB 02/10/07 8x SLOTS SUITABLE FOR M6 FIXINGS 1:3 50-1322105 800MHz 5CH CAVITY COMBINER OUTLINE DRAWING I1 AA Drawing number 50-1322105 22.3.2.1. 800MHz 5 Cavity Combiner System (50-132205) Outline Drawing STTRS DOCUMENTATION Page 417 of 500 532.2 12U 22.3.2.2. 800MHz 5 Cavity Combiner System (50-132205) System Diagram Drawing number 50-132285 STTRS DOCUMENTATION Document Number 80-330501HBKM – Issue A - Draft Page 418 of 500 22.3.2.2. Dielectric Cavity Resonator (04-003401) Cavity resonators are used in this system for their high Q factor response and power handling characteristics. Being finely tuned items, they can be prone to being de-tuned by mechanical shock or vibration therefore these units should be handled, stored and installed with care. Note that the cavities are coupled together using critical length harnesses. If any cable is to be changed the exact same length and type of cable should be used for replacement. 04-003401 Specification Specification Frequency Range Bandwidth Insertion Loss Return Loss Attenuation Power Handling (CW) Environmental Size Weight Connectors Temperature operation range storage Parameter 800 - 950MHz * 25 kHz* < 1.0 dB > 15 dB (at both ports) > 10 dB at Fc ± 1 MHz 20W IP54 124mm x 158mm x 157mm** 1.5 kg N female -20°C to +60°C -40°C to +70°C *Tuned to Customer’s specification **Height is dependant upon position of tuning plunger STTRS DOCUMENTATION Document Number 80-330501HBKM – Issue A - Draft Page 419 of 500
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 12 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:662f01bd-41c9-4d37-a9a4-dedf459459ad Modify Date : 2008:07:10 16:32:57+01:00 Create Date : 2008:07:10 16:32:43+01:00 Metadata Date : 2008:07:10 16:32:57+01:00 Document ID : uuid:c25f832d-6ce2-42cc-81d9-004f48726f82 Format : application/pdf Title : Microsoft Word - 80-330501HBKM.DOC Creator : PScript5.dll Version 5.2 Author : shodgkinson Producer : Acrobat Distiller 6.0 (Windows)EXIF Metadata provided by EXIF.tools