PC Locs ELE1906 6-key remote controller User Manual Manual R6 lab 101221

Download:
Mirror Download [FCC.gov]
Document ID	1403907
Application ID	6cEL7pIiaYhtU7Ho5Ddvdg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	7.6kB (94970 bits)
Date Submitted	2011-01-12 00:00:00
Date Available	2011-01-12 00:00:00
Creation Date	2010-12-23 17:03:18
Producing Software	Corel PDF Engine Version 1.0.0.458
Document Lastmod	2010-12-23 17:03:18
Document Title	Manual-R6-lab-101221.cdr
Document Creator	CorelDRAW 版本 12.0

USER MANUAL
6-key Remote Controller
SAFE
ON
SAFE
OFF
1HR
ALL
3HR
ALL
1HR
CYCLE
3HR
CYCLE
This is a remote controller that can generate radio wave carrying control
signal. After paired with a suitable Receiver, the remote controller can
control the Receiver by pressing on the remote. Each button of the remote
contains one unique ID. The paired Receiver is capable to identify the ID
and then take action accordingly.
Tips of using the Remote Controller:
* Line of sight from the Remote Switch to the Receiver is not required.
The control signal can pass through walls and ceilings.
* As with all RF transmitter devices, electrical fields, metal doors,
and motor devices can decrease the strength of the transmitting control
signal. Reorient the Remote Controller may increase the control range.
* It is not guaranteed that every control signal sent out by the Remote
Controller will be received by the paired Receiver. Check to make sure
of the Receiver has responded after your press on the Remote Controller.
* If the LED indicator of the Remote Controller dimmed, replace the
battery according to the polarity sign on the battery apartment. One
new CR2032 lithium battery is needed.
Specifications:
Product: 6-key Remote Controller
Model No.: ELE1906
Transmission Media: 433.92MHz radio frequency
Power Supply: 1 x CR2032 3V battery
This Remote Controller conforms with Part 15 of FCC rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference;
2. This device must accept any interference received, including
interference may cause undesired operation.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the device.
NOTE: This device have ben tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential use. This device generates, uses and can radiate radio
frequency energy and, if not used in accordance with the instructions, may
cause harmful interference to radio communications.
Designed and Manufactured by:
Sino Wealthy (HK) Limited
Room 1801, Great Eagle Centre, No.23,
Harbour Road,Wanchai, Hong Kong
admin@sinowell.com.hk
Manufactured under ISO9001
quality management system
Made in Shenzhen,China
WEEE Directive & Product Disposal
At the end of its serviceable life, this
product should not be treated as
household or general waste. It should be
handed over to the applicable collection
point for the recycling of electrical and
electronic equipment, or returned to the
supplier for disposal.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 2
Create Date                     : D:20101223170318
Modify Date                     : D:20101223170318
Producer                        : Corel PDF Engine Version 1.0.0.458
Creator                         : CorelDRAW 版本 12.0
Title                           : Manual-R6-lab-101221.cdr

EXIF Metadata provided by EXIF.tools