Quick Start Guide Samsung Galaxy A5 2017 SM A520W

User Manual: PDF Quick Start Guide Samsung User Guides

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadQuick Start Guide Samsung Galaxy A5 2017 SM-A520W
Open PDF In BrowserView PDF
QUICK
START
GUIDE
SM-A520W

Device layout

Accessing more information

To turn on the device, press and hold the Power key
for a few seconds.

Visit www.samsung.com/ca to view device
information, the user manual, and more.

• The user manual may not be available

Memory
card tray

depending on the web browser or service
provider.

• You may incur additional charges for
accessing the Internet.

Installing a nano-SIM card and a
microSD card
Insert the ejection pin into the hole on the tray to
loosen the tray.

Charging the battery

Correct card installation

Before using the device for the first time, you must
charge the battery.

Nano-SIM card

Gently press the card into the tray to secure it.

• Ensure that the ejection pin is perpendicular
to the hole. Otherwise, the device may be
damaged.

microSD card

• If the card is not fixed firmly into the tray,
the card may leave or fall out of the tray.

Volume key

Power key

Use only a nano-SIM card.

Nano-SIM cards and microSD cards are sold
separately.
The charger should remain close to the
electric socket and easily accessible while
charging.

SIM card
tray
Back key
Recents key

Multipurpose
jack (USB
Type-C)

Home key
(Fingerprint
recognition
sensor)

Printed in Korea
GH68-47545A Rev. 1.0
English (CA) 02/2017

A520W_QSG_CA_Eng.indd 1

2/9/2017 10:25:03 AM

• To transfer data from the previous

device to a new device: Visit
www.samsung.com/smartswitch for more
information.

• If your device is frozen and unresponsive,

press and hold the Power key and the Volume
Down key simultaneously for more than
seven seconds to restart it.

Correct disposal
To view more information about device and battery
disposal, tap Apps → Settings → About device → Legal
information → Safety information.
This device contains a LiIon battery. For safe disposal options,
contact your nearest service centre. For information on battery
replacement, please contact your service provider. Do not
disassemble, crush, or puncture the device. Do not dispose of it
in a fire.

•
•

Be sure to dispose of your device properly. In some areas,
the disposal of batteries in household or business trash
may be prohibited.
For safety, do not handle the device if the LiIon battery is
damaged or leaking.

Safety information
Read all safety information before using the device to ensure safe
and proper use.

Warning
Follow the warning information provided below to
prevent incidents such as fire or explosion
• Do not expose the device to physical impact or damage.
-- Do not carry your device in your back pockets or on your
waist.
• Use manufacturer-approved chargers, accessories, and supplies.
• Prevent the multipurpose jack from contacting conductive
elements, such as metal or liquids.
• Do not touch the charger or the device with wet hands while
the device is charging.
• If any part of the device is cracked or broken, stop using the
device immediately and take it to a Samsung Service Centre.

Follow the warnings below to prevent injury to people
or damage to the device
• Do not allow children or animals to chew or suck the device.
• Do not poke eyes, ears, or other body parts with the device or
insert the device into the mouth.
• Do not use the camera flash close to the eyes of people or
animals.
Some content may differ from your device depending on the
region, service provider, or software version, and is subject to
change without prior notice.
Copyright © 2017 Samsung Electronics

A520W_QSG_CA_Eng.indd 2

• The device can be used in locations with an ambient
temperature of 0°C to 35°C. You can store the device at an
ambient temperature of -20°C to 50°C. Using or storing the
device outside of the recommended temperature ranges may
damage the device or reduce the battery’s lifespan.
• Do not store your device near or in heaters, microwaves,
cooking equipment, or high pressure containers.
• Keep your device dry.
• Do not use your device outdoor during a thunderstorm.
• Comply with all safety warnings and regulations regarding
mobile device usage while operating a vehicle.
To prevent possible hearing damage when using
a headset, do not listen to sound at high volume
for long periods.

To view the full safety information, tap Apps → Settings →
About device → Legal information → Safety information.

Maintaining water and dust
resistance
The device may be damaged if water or dust enters the device.
Follow these tips carefully to prevent damage to the device and to
maintain the water- and dust-resistant performance of the device.
• Do not immerse the device in water deeper than 1.5 m or keep
it submerged for more than 30 minutes.
• Do not expose the device to water moving with force.
• If the device is exposed to clean water, dry it thoroughly with a
clean, soft cloth. If the device is exposed to other liquids, such
as salt water, ionized water, or alcoholic beverage, rinse it with
clean water and dry it thoroughly with a clean, soft cloth. If you
do not follow these instructions, the device’s performance and
appearance may be affected.
• If the device has been immersed in water or the
microphone or the speaker is wet, sound may not be heard
clearly during a call. Wipe the device with a dry cloth or dry it
thoroughly before using it.
• The touchscreen and other features may not work properly if
the device is used in water.
Your device has been tested in a controlled environment
and certified to be water- and dust-resistant in specific
situations (meets requirements of classification
IP68 as described by the international standard IEC
60529-Degrees of Protection provided by Enclosures [IP
Code]; test conditions: 15-35 °C, 86-106 kPa, 1.5 metre, 30
minutes). Despite this classification, it is still possible for
your device to be damaged in certain situations.

Acknowledging Special
Precautions and Industry Canada
Notice
Cautions
Any changes or modifications to your phone not expressly
approved by Samsung could void your warranty for this
equipment, and void your authority to operate this equipment.
Only use approved batteries, antennas, and chargers. The use of
any unauthorized accessories may be dangerous and void the
phone warranty if said accessories cause damage or a defect to
the phone.
Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting, bending,
or sitting on it.

Information to User
This equipment has been tested and found to comply with the
limits of a Class B digital device. These limits are designed to
provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation; if this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient/relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.

Specific Absorption Rate (SAR)
certification information
Your device conforms to Industry Canada standards that limit
human exposure to radio frequency (RF) energy emitted by radio
and telecommunications equipment. These standards prevent
the sale of mobile devices that exceed a maximum exposure level
(known as the Specific Absorption Rate, or SAR) of 1.6 W/kg. SAR
information on this and other model devices can be accessed
online on IC’s website through ic.gc.ca/eic/site/ceb-bhst.nsf/
eng/h_tt00084.html.
In normal use, the actual SAR is likely to be much lower, as the
device has been designed to emit only the RF energy necessary
to transmit a signal to the nearest base station. By automatically
emitting lower levels when possible, your device reduces your
overall exposure to RF energy.
Industry Canada has granted an IC Certification Number for
this model device based on the compliance of all reported SAR
levels with the IC RF exposure guidelines. This device has an IC
number: 649E-SMA520W [Model Number: SM-A520W] and the
specific SAR levels for this device can be found at the following
Industry Canada website: sms-sgs.ic.gc.ca/equipmentSearch/
searchRadioEquipments.
The SAR information for this device can also be found on
Samsung’s website: www.samsung.com/sar.

IC Notice
This device complies with Industry Canada licence exempt RSS
standard(s). Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference
that may cause undesired operation of the device.

2/9/2017 10:25:04 AM



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c137 79.159768, 2016/08/11-13:24:42
Create Date                     : 2017:02:09 10:25:03-05:00
Metadata Date                   : 2017:02:09 10:25:04-05:00
Modify Date                     : 2017:02:09 10:25:04-05:00
Creator Tool                    : Adobe InDesign CC 2017 (Windows)
Instance ID                     : uuid:c0d5e057-7aa7-4805-8082-c52cb5e53da1
Original Document ID            : xmp.did:4E2DCB0CA1A0E1118F7CDBEDF97EAA78
Document ID                     : xmp.id:5ab5c14f-b27c-7a4d-a3eb-15a7bde1e262
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:bc936885-99d1-444e-a868-4922a58ef928
Derived From Document ID        : xmp.did:5e4e0b46-a80d-3f4e-a55e-713d7585b3d4
Derived From Original Document ID: xmp.did:4E2DCB0CA1A0E1118F7CDBEDF97EAA78
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2017 (Windows)
History Changed                 : /
History When                    : 2017:02:09 10:25:03-05:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CC 2017 (Windows)
EXIF Metadata provided by EXIF.tools

Navigation menu