PDI Communication System CV2600M LCD TV User Manual PDI CV2600 PDI CV3200 V2 0

PDI Communication System, Inc. LCD TV PDI CV2600 PDI CV3200 V2 0

Users manual

1Document Number: PD196-167R2PDI Communication Systems Models PDI-CV2600 PDI-CV320026” and 32” Healthcare LCD TV User ManualDocument Number: PD196-167R2
2Document Number: PD196-167R2CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPEN !CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCKDO NOT REMOVE COVER (OR BACK)NO USER SERVICEABLE PARTS INSIDEREFER SERVICING TO QUALIFIED SERVICE PERSONNEL7KLVOLJKWQLQJÀDVKZLWKDUURZKHDGV\PEROZLWKLQDQHTXLODWHUDOWULDQJOHLVLQWHQGHGWRDOHUWWKHXVHUWRWKHSUHVHQFHRIXQLQVXODWHGGDQJHURXVYROWDJHZLWKLQWKHSURGXFW¶VHQFORVXUHWKDWPD\EHRIVXI¿FLHQWPDJQLWXGHWRFRQVWLWXWHDULVNRIHOHFWULFVKRFNWRSHUVRQV7KHH[FODPDWLRQSRLQWZLWKLQDQHTXLODWHUDOWULDQJOHLVLQWHQGHGWRDOHUWWKHXVHUWRWKHSUHVHQFHRILPSRUWDQWRSHUDWLQJDQGPDLQWHQDQFHVHUYLFLQJLQVWUXFWLRQVLQWKHOLWHUDWXUHDFFRPSDQ\LQJWKHSURGXFWWARNING: To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.WARNING: To prevent injury, this apparatus must be securely attached to the oor/wall in accordance with the installation instructions.WARNING: Do not install this equipment in a conned space such as a bookcase or similar unit.CAUTION: Do not block ventilation openings. Install in accordance with the manufacturer’s instructions.REGULATORY INFORMATIONFCC Part 15is equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.ese limits are designed to provide reasonable protection against harmful interference in a residential installation. is equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, many cause harmful interference to radio communications.However, there is not guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:t Reorient or relocate the receiving antenna.t Increase the separation between the equipment and receiver.t Connect the equipment into an outlet on a circuit dierent from that to which the receive is connected.t Consult the dealer or an experienced radio/TV technician for help.ModicationsAny changes or modications made to this device that are not expressly ap-proved by PDI may void the user’s authority to operate the equipment.CablesConnections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain compliance with FCC Rules and Regulations.Healthcare Grade Televisione PDI Healthcare series television is specically designed for installation and use in a healthcare environment. e TV’s special design and safety features have been investigated by the Underwriters Laboratory and Listed for use in Hospitals, Nursing Facilities, Dialysis Clinics, and similar healthcare services. SERVICINGUser ServicingIf your product is not operating correctly or exhibits a marked change in performance and you are unable to restore normal operation by following the detailed procedure in its operating instructions, do not attempt to service it yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualied service personnel.Damage Requiring ServiceUnplug this product from the wall outlet and refer servicing to qualied service personnel under the following conditions:t When the power supply cord or plug is damaged.t If liquid has been spilled, or objects have fallen into the product.t If the product has been exposed to rain or water.t If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will oen require extensive work by a qualied technician to restore the product to its normal operation.t If the product has been dropped or damaged in any way.t When the product exhibits a distinct change in performance which indicates a need for service.Replacement PartsWhen replacement parts are required, be sure the service technician has used replacement parts specied by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in re, electric shock, or other hazards.Safety CheckUpon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in safe operating conditions.Cleaning & Disinfectingt Unplug the TV Before Cleaning.t Use a so damp cloth to clean. t Do not use harsh chemicals such as solvents.t Wipe o water droplets from the cabinet and screen as soon as pos-sible as they may leave spots.
3Document Number: PD196-167R2IMPORTANT SAFETY INSTRUCTIONS1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. e wide blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11. Only use attachments/accessories specied by the manufacturer.12. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13. Unplug this apparatus during light-ning storms or when unused for long periods of time.14. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.15. is appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.16. Care should be taken so that objects do no fall and liquids are not spilled into the enclosure through openings. 17. If an outside antenna or cable system is connected to the video product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of anten-na-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure A.NEC – NATIONAL ELECTRICAL CODEELECTRICSERVICEEQUIPMENTGROUNDCLAMPANTENNALEAD INWIREANTENNADISCHARGE UNIT(NEC SECTION 810 – 20)GROUNDING CONDUCTORS(NEC SECTION 810 – 21)GROUND CLAMPSPOWER SERVICE GROUNDINGELECTRODE SYSTEM(NEC ART 250, PART H)FIG.ANOTE: is reminder is provided to call the CATV system installer’s attention to article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, species that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
4Document Number: PD196-167R2INSTALLATIONLOCATIONLocate a mounting position on the foot wall in front of the hospital bed. Other locations may be used depending upon the mounting means and room type. Healthcare televisions are normally mounted near the ceiling to provide needed clearance. A minimum 3 inch spacing is recommened for cooling.Note: Ceiling mounted uorescent lights and windows may produce unwanted glare and should be considered when selecting a mounting location. TV MOUNTe PDI Healthcare television utilizes a VESA pattern. Selection of an appropriate mount will depend primarily upon the mount’s capacity and intended functionality. Install the TV as recommended by the mount’s manufacturer. Please note the correct mounting screw size requirements.PDI also oers compatible TV mounts. Please refer to the installation instructions that pack with each mount for additional details. PDI TV MODEL MOUNT MODELCV2600 PD168-033CV3200 PD168-204OPTIONAL ACCESSORIESe following optional accessories are available for your PDI Healthcare television.CV2600 Table Stand CV1003 Programming Remotes400 mm200 mmCV3200M6 Screws Required200 mm200 mmCV2600M4 Screws RequiredPOWERMUTEOKTV/FMTV/AV1234567890*CODE SLEEP LASTCC ARC SAPPatient RemotesPD108-421 PD108-427CV1000 (Not Pictured) CV1001 PD108-420POWER MUTESETUP TV/AV TV/FM CH LISTSLEEP LASTOKARC CCPSM SSM SAPTEXT SIZE INDEX REVEALHOLD MODE MIX UPDATESUBPAGE1234567890*CHCHVOLVOLSLEEP ARC SETUPOKVOL CHTV/AV TV/FMMUTEMTS/SAP. PSM.CC.PageUpPageDown1234567890LASTPOWERCV3200 Table Stand CV1004 3” min.
5Document Number: PD196-167R2PILLOW SPEAKER CONNECTIONSPILLOW SPEAKER STYLESControl of the TV is possible using either a single-button Analog or multi-button Digital style pillow speaker (neither supplied with TV).TV PILLOW SPEAKER WIRINGe PDI Healthcare television series utilizes the industry standard 3-wire interface via a 1/4 inch stereo jack located on the back of the TV. Additionally, the TV employes a universal pillow speaker interface that can be congured to operate with many dierent model pillow speakers. Move the pillow speaker slide switch located next to the Pillow Jack to match the appropriate style pillow speaker. Refer to your nurse call system wiring instructions for the pillow speaker’s bed side connections.Slide Switch Position Pillow Speaker TypeCR RCAOFF Disables Pillow Speaker ControlCP PhillipsCZ Zenith and Analog1234567890ANALOG DIGITALTVDATASOUND COMMONCR OFF CP CZPILLOWTV CONNECTIONTO BEDSIDECONNECTIONWARNING: Do Not Ground the Common wire connection. Grounding the connection will by-pass the TV’s pillow speaker isolation circuit and increase the risk of electrical shock.
6Document Number: PD196-167R2TV CONTROLS & CONNECTIONSTV ControlsStandard TV controls are located on the TV’s lower right cabinet side. Basic control is provided.TV/AV Switches the TV between various Enabled Sources. Press the button once to verify the current sources. Press the button additional times to advance to the next active source.CC Closed Caption (Sub-Title) control. Press the button once to verify the current Closed Caption mode. Press the button additional times to advance to the next Closed Caption Mode.CHŸ/źSelects the next or previous channel. If a menu item is active, selects the next or previous menu item.VOLŸ/źIncreases or decreases the volume. If a menu item is active, adjusts the menu items settings.POWER Turns TV On and O.TV Connectionse PDI CV series televisions oer connection jacks for many dierent types of external devices such as DVD players, Game Boxes, and other similar devices. Connections are located along the back edge of the Television.TV Connectors
7Document Number: PD196-167R2,1&RPSRVLWH &RPSRVLWH9LGHRLQSXWMDFN,169LGHR 69LGHR9LGHRLQSXWMDFNIN - L, R /HIWDQG5LJKW$XGLRLQSXWMDFNVFRPPRQIRUERWK&RPSRVLWHRU69LGHRLQSXWVTV Connectors ANT TV/FM )&RQQHFWRULQSXWMDFNIRUWKHKRVSLWDOFDEOH79VLJQDO127()0UDGLRFKDQQHOVDUHDOVRUHFHLYHGRQWKLVLQSXW03(*8SJUDGH 86%3RUWIRUVHUYLFHXVHRQO\CLONING 86%3RUWIRUFORQLQJWKH797KH79FDQEHSURJUDPPHGFORQHGIURPLQIRUPDWLRQVWRUHGRQD86%)ODVK'ULYHOUT287&RPSRVLWH9LGHR 'HPRGXODWHG79VLJQDO&RPSRVLWHRXWSXWYLGHR287&RD[LDO 'HPRGXODWHG79VLJQDO'LJLWDODXGLRRXWSXWOUT - L, R 'HPRGXODWHG79VLJQDO/HIWDQG5LJKWRXWSXWDXGLRIN - L, R &RPSRQHQW/HIWDQG5LJKWDXGLRLQSXWMDFNVIN - Y, PB, PR&RPSRQHQW9LGHRLQSXWMDFNVHDMI2 +'0,VLJQDOLQSXWMDFN,QSXWIRUWKHKLJKTXDOLW\+'0,VLJQDOHDMI1 +'0,VLJQDOLQSXWMDFN,QSXWIRUWKHKLJKTXDOLW\+'0,VLJQDOVGA 9*$9LGHR,QSXWMDFN7KH79FDQEHXVHGDVDFRPSXWHUPRQLWRUVGA AUDIO 3&$XGLR,QSXWMDFN7KH79¶VLQWHUQDOVSHDNHUVFDQEHXVHGIRUFRPSXWHUVRXQGCOMM - CCI &RPSXWHU&RQWURO,QWHUIDFHMDFNNOTE: DO NOT FRQQHFWWRDKRVSLWDO¶VGDWDQHWZRUNDVGDPDJHZLOOUHVXOWWRWKHO79COMM - MTI 0XOWLSOH7HOHYLVLRQ,QWHUIDFHMDFN8VHZLWKH[WHUQDOFRQWUROER[HV NOTE: DO NOTFRQQHFWWRDKRVSLWDO¶VGDWDQHWZRUNDVGDPDJHZLOOUHVXOWWRWKH79EXT +5V ([WHUQDO9,QSXWIRU79VHUYLFHGLDJQRVWLFVHOUR METER 'LJLWDO5HDGRXWRIWKH79¶VKRXUVPILLOW 3LOORZ6SHDNHU-DFN6HHPILLOW SPEAKER CONNECTIONSIRUGHWDLOVCR-OFF-CP-CZ 3LOORZ6SHDNHUFRPSDWLELOLW\VZLWFK6HHPILLOW SPEAKER CONNECTIONSIRUGHWDLOV
8Document Number: PD196-167R2Programming the TVConnect the TV to a Cable TV signal before proceeding. Verify the handheld remote control operates the TV.1. Press the setup button on the remote.2. From the Setup menu, select Channels.3. In the Channels menu, select Signal. Set the signal to one ap-propriate to your healthcare facility. e possible choices are,&DEOH67' Standard Cable TV &DEOH,5& Incrementally Related Carrier &DEOH+5& Harmonically Related Carrier$LU Air (Antenna) 4. In the Channels menu, select Auto Program.5. In the Auto Program menu, select Mode. e TV can be set to search and locate dierent styles of TV signals; $QDORJ2QO\,'LJLWDO2QO\, or both $QDORJDQG'LJLWDO channels. Select the style of signal.6. In the Auto Program menu, select Channel Sequence and select the manner in which channels are viewed. e possible selections are:,QWHUOHDYH$' Analog and Digital appear grouped together$OO$WKHQ' Analog appear rst, followed by Digital7. e Additional Digital Signal selection allows for auto pro-gramming of a second block of channels using a dierent signal type. For example, rst Auto Program the TV for CATV STDsignals, then use the $GGLWLRQDO'LJLWDO6LJQDO set to AIR provides a second auto programming of air type signals to be included in addition to the channels found during normal Auto Program searching into the same Service Level.8. e TV oers 3 discrete groups of channels or Service Levels.Free, Basic, or Premium can each be programmed and used as needed. Select the desired Service Level to program.9. Press the <HV (Channel Up button) to begin Auto Programing or 1R (Channel Down button) to exit. Auto Programming takes ap-proximately 2 to 12 minutes.SETUP ■ Service Level Free ■ Picture ▶ ■ Sound ▶ ■ Channels ▶ ■ Features ▶ ■ OSD Language English ■ Sources ▶ ■ FM Radio ▶Position: STExit: SETUP Next: WXChannel Setup ■ Signal Cable STD ■ Auto Program ▶ ■ Add/Delete Channels ▶ ■ Clear Service Level ▶ ■ Copy Service Level ▶ ■ Parental Control ▶ ■ Power On Channel ▶ ■ Channel Lock Disabled ■ Channel Memory Override EnabledPosition: STExit: SETUP Next: WXAuto Program ■ Mode Analog Only ■ Channel Sequence Interleave A+D ■ Additional Digital Signal None ■ Free Programmed ▶ ■ Basic Blank ▶ ■ Premium Blank ▶Position: STExit: SETUP Next: WXConrm Auto Program ■ Conrmation ▶Exit: SETUPYes SNo T
9Document Number: PD196-167R2Pillow Speaker Sound SetupProper setup of the TV’s Sound is required for use with a wired Pillow Speaker. Setup involves disabling the TV’s internal speakers and then setting the audio level to the pillow speaker. 1. Press the setup button on the handheld programming remote control.2. From the Setup menu, select Sound.3. In the Sound menu, select Internal Speaker Enable.4. In the Internal Speaker Enable menu select the source you wish to disable. For television select TV. 5. For Pillow Speakers with a thumb wheel volume con-trol, in the Sound Menu, select Minimum Volume,and set the level to approximately 50% to provide a xed level of sound for the pillow speaker to adjust.NOTE: Pillow Speakers with dedicated Volume Up and Volume Down buttons do not require a Minimum Volume adjustment.Internal Speaker Enable Speaker ■ TV Disabled ■ Composite Video Disabled ■ S-VIDEO Disabled ■ Component 1 Disabled ■ Component 2 Disabled ■ HDMI 1 Disabled ■ HDMI 2 Disabled ■ PC-ANALOG Disabled ■ FM RADIO DisabledPosition: STExit: SETUP Next: WXSETUP ■ Service Level Free ■ Picture ▶ ■ Sound ▶ ■ Channels ▶ ■ Features ▶ ■ OSD Language English ■ Sources ▶ ■ FM Radio ▶Position: STExit: SETUP Next: WXSound ■ Balance 0 ■ Minimum Volume 0 ■ Maximum Volume 100 ■ Power On Volume Last ■ Internal Speaker Enable ▶ ■ HDMI 1 Audio Port HDMI 1 ■ HDMI 2 Audio Port HDMI 2 ■ Composite /S-Video Sound Mode L+RPosition: STExit: SETUP Next: WXSound ■ Balance 0 ■ Minimum Volume 50 ■ Maximum Volume 100 ■ Power On Volume Last ■ Internal Speaker Enable ▶ ■ HDMI 1 Audio Port HDMI 1 ■ HDMI 2 Audio Port HDMI 2 ■ Composite/S-Video Sound Mode L+RPosition: STExit: SETUP Next: WX
10 Document Number: PD196-167R2Programming the TV’s FM RadioConnect the TV to a Cable TV signal before proceeding. Verify the handheld remote control operates the TV.1. Press the setup button on the remote.2. From the Setup menu, select FM Radio. NOTE: if the FM Radio item is non-selectable, enable FM Radio in the Sources menu rst.3. In the FM Radio Setup menu, select Auto Program. A conrmation screen will appear. 4. In the &RQ¿UP)05DGLR3URJUDP menu, press Channel Up on the remote to begin or Channel Down to abort. e TV will now search every available FM frequency and memorize frequencies that contain radio stations. NOTE: FM radio signals must be present on the coax input cable for the TV’s FM radio feature to work properly.SETUP ■ Service Level Free ■ Picture ▶ ■ Sound ▶ ■ Channels ▶ ■ Features ▶ ■ OSD Language English ■ Sources ▶ ■ FM Radio ▶Position: STExit: SETUP Next: WXFM Radio Setup ■ Auto Program ▶ ■ Frequency 100.7 MHz ■ Add/Delete AddedPosition: STExit: SETUP Next: WXConrm FM Radio ProgramExit: SETUPYes: SNo: T ■ Conrmation ▶
11 Document Number: PD196-167R2TroubleshootingProblem CHECKNo Picture and No Soundವ Ensure the TV is connected to a powered AC outlet. The TV’s front lamp will glow Red when correctly connected to power.ವ Operate the TV directly by pressing the TV’s POWER button located on the side of the cabinet.ವ Try to cycle power to the TV by pulling the power cord from the AC outlet, wait for 30 seconds, plug it back into the outlet, wait 15 seconds or more and then try to turn On the TV again.No Picture, Sound OKವ Verify TV is set to an active Video Source or set directly to TV by pressing the TV/AV button on the side of the TV or the TV/AV button on the remote control.ವ If an Auxiliary Input Source is selected, verify the Video input signal cable is connected and the video source is playing.Picture OK, No Soundವ Verify the Sound has not been muted.ವ Check the Volume settings.ವ Verify pillow speaker is connected and the volume control on the pillow speaker is properly adjusted.ವ If an Auxiliary Input Source is selected, verify the Audio input signal cable is connected and the video source is playing.No Sound from Internal TV Speakerವ Verify the sound has not been muted.ವ Verify the TV’s internal speakers have not been disabled in the “Internal Speaker Enable” setup menu.Picture is too Lightವ Check that external light sources, such as windows or overhead lights are not creating glare on the TV’s screen.ವ Check the TV’s Brightness and Contrast settings in the TV’s Picture menu. Picture is too Dark ವ Check the TV’s Brightness and Contrast settings in the TV’s Picture menu. Picture Breaks-Up or Jitters ವ Verify the coax cable is connected correctly.ವ The cable TV signal may be too weak.Picture has Ghost Images ವ The cable TV signal may be too weak.ವ The coax cable connection may be loose.Picture has Stripes or Dots ವ The cable TV signal may be too weak.ವ The coax cable connection may be loose.Pillow Speaker does not Control TV ವ Check the TV’s Pillow Speaker Selector switch is correctly set.ವ Replace Pillow Speaker.Remote Control does not workವ Replace the remote’s batteries.ವ 9HULI\WKDWVWURQJᚐXRUHVFHQWOLJKWVDUHQRWᚐRRGLQJWKH79ಬV,5ZLQGRZVವ For patient remote controls, verify remote is set to the correct Bed Code.
12 Document Number: PD196-167R2Cloning the TV - Saving Settingse TV settings can be saved to a USB Flash Drive and then used to program another television. A specially prepared USB Flash Drive (not supplied) is required. Please contact PDI to purchase this optional item. SAVING A TV’S SETTINGS 1. Turn the TV On and insert the USB Flash Drive into the Cloning USB Slot located on the back of the TV. A Cloning Main Menu will appear when the Drive is properly installed.2. From the Cloning Main Menu, select Save Settings to USB.3. In the Save Settings to USB Drive menu, select the appropri-ate model. A conrmation menu will appear.4. In the conrmation menu, select Channel Up for Yes to save the settings. Otherwise, press Volume Down to exit without saving the TV’s setting. 5. e USB Flash Drive can now be removed and used to program another television with its settings. Cloning Main Menu ■ Restore Settings to TV ▶ ■ Save Settings to USB ▶ ■ Download Firmware to TV ▶ ■ Information ▶Position: ST Next: XSave Settings to USB Drive ■ CV2600 ▶ ■ CV3200 ▶ Position: ST Next: XBack: WSave Settings to USB DriveBack: WYes: S Overwrite CV2600.tdfwith settings from TV ?
13 Document Number: PD196-167R2Cloning the TV - Restoring SettingsA TV settings once saved to a USB Flash Drive and then be used to program another television. A specially prepared USB Flash Drive (not supplied) is required. Please contact PDI to purchase this optional item. RESTORE A TV’S SETTINGS 1. Turn the TV On and insert the USB Flash Drive into the Cloning USB Slot located on the back of the TV. A Cloning Main Menu will appear when the Card is properly installed.2. From the Cloning Main Menu, select Restore Settings to TV.3. In the Restore Settings to TV menu, select the appropriate model. A conrmation menu will appear.4. In the conrmation menu, select Channel Up for Yes to restore the settings. Otherwise, press Volume Down to exit without restoring the TV’s setting. 5. e USB Flash can now be removed and the TV checked for cor-rect programming.Cloning Main Menu ■ Restore Settings to TV ▶ ■ Save Settings to USB ▶ ■ Download Firmware to TV ▶ ■ Information ▶Position: ST Next: XRestore Settings to TV ■ CV2600 ▶ ■ CV3200 ▶ Position: ST Next: XBack: WRestore Settings to TVBack: WYes: SRestore Settingsto TV from CV2600.tdf?
14 Document Number: PD196-167R2TV Menu NavigationPicture ■ Brightness 50 ■ Contrast 50 ■ Color 50 ■ Tint 50 ■ Color Temp ▶ ■ Sharpness 50 ■ PC Analog/HDMI Picture ▶ ■ Component Input Picture ▶Position: STExit: SETUP Next: WXColor Temperature ■ Standard ■ Reddish ■ Greenish ■ Blueish ■ UserR G BPosition: STExit: SETUP Next: WXComponent 1/2 Input Picture ■ Temperature 6500 ■ Clock 50 ■ Phase 50 ■ ARC 16:9 ■ H-Position 50 ■ V-Position 50 ■ Auto Position: STExit: SETUP Next: WXAdd/Delete Channel Service Level ■ Free Programmed ▶ ■ Basic Blank ▶ ■ Premium Blank ▶Position: STExit: SETUP Next: WXAdd/Delete Channels ■ Analog Channel 2 ■ Add/Delete Analog Channel Deleted ■ Enable/Disable Digital Channel ▶Position: STExit: SETUP Next: WXEnable/Disable Digital Channels 7-1 WHIO HD Enabled 7-2 WHIO WX Enabled 16-1 16HD Enabled 16-2 16Again Enabled 16-3 16 Life Enabled 16-4 16 Ohio Enabled 16-5 16DT Enabled 44-315 Enabled 77-7 Enabled 77-9 Enabled Position: STExit: SETUP Next: WXSample Channel Listing Shown for Illustrative purposes. Actual Channel Listing will vary.Internal Speaker Enable Speaker ■ TV Disabled ■ Composite Video Disabled ■ S-VIDEO Disabled ■ Component 1 Disabled ■ Component 2 Disabled ■ HDMI 1 Disabled ■ HDMI 2 Disabled ■ PC-ANALOG Disabled ■ FM RADIO DisabledPosition: STExit: SETUP Next: WXAuto Program ■ Mode Analog Only ■ Channel Sequence Interleave A+D ■ Additional Digital Signal None ■ Free Programmed ▶ ■ Basic Blank ▶ ■ Premium Blank ▶Position: STExit: SETUP Next: WXChannel Setup ■ Signal Cable STD ■ Auto Program ▶ ■ Add/Delete Channels ▶ ■ Clear Service Level ▶ ■ Copy Service Level ▶ ■ Parental Control ▶ ■ Power On Channel ▶ ■ Channel Lock Disabled ■ Channel Memory Override EnabledPosition: STExit: SETUP Next: WXConrm Auto Program ■ Conrmation ▶Exit: SETUPYes SNo TPC Analog/HDMI Picture ■ Temperature 6500 ■ Clock 50 ■ Phase 50 ■ ARC 16:9 ■ H-Position 50 ■ V-Position 50 ■ Auto Position: STExit: SETUP Next: WXSETUP ■ Service Level Free ■ Picture ▶ ■ Sound ▶ ■ Channel Setup ▶ ■ Features ▶ ■ OSD Language English ■ Source Setup ▶ ■ FM Radio ▶Position: STExit: SETUP Next: WXSound ■ Balance 0 ■ Minimum Volume 0 ■ Maximum Volume 100 ■ Power On Volume Last ■ Internal Speaker Enable ▶ ■ HDMI 1 Audio Port HDMI 1 ■ HDMI 2 Audio Port HDMI 2 ■ Composite/S-Video Mode L+RPosition: STExit: SETUP Next: WX
15 Document Number: PD196-167R2TV Menu Navigation- continuedClear Service Level ■ Free Programmed ▶ ■ Basic Blank ▶ ■ Premium Blank ▶Position: STExit: SETUP Next: WXConrm Clear ■ Conrmation ▶Exit: SETUPYes SNo TCopy Service Level ■ From: Free To: Basic ▶Adjust From: SExit: SETUPAdjust To: TNext: WXCopy Service Level ■ From: Free To: Basic ▶Adjust From: SExit: SETUPAdjust To: TNext: WXConrm Copy ■ Conrmation ▶Exit: SETUPYes SNo TParental Control ■ TV Rating ▶ ■ MPAA Rating ▶ ■ Advanced Rating ▶ ■ Advanced Rating Option Disabled ■ Change Password ▶ ■ Aux. Block Sources Unblocked ■ Block Hour Always ■ Parental Lock DisabledPosition: STExit: SETUP Next: WXMPAA Rating ■ G U ■ PG U ■ PG-13 U ■ R U ■ NC-17 U ■ X U ■ No Rating UPosition: STExit: SETUP Next: WXChange Password Enter Password - - - - Conrm Password - - - -Exit: SETUPPower On Channel Channel ■ Free 12 ■ Basic Last ■ Premium LastPosition: STExit: SETUP Next: WXChannel Setup ■ Signal Cable STD ■ Auto Program ▶ ■ Add/Delete Channels ▶ ■ Clear Service Level ▶ ■ Copy Service Level ▶ ■ Parental Control ▶ ■ Power On Channel ▶ ■ Channel Lock Disabled ■ Channel Memory Override EnabledPosition: STExit: SETUP Next: WXSETUP ■ Service Level Free ■ Picture ▶ ■ Sound ▶ ■ Channel Setup ▶ ■ Features ▶ ■ OSD Language English ■ Source Setup ▶ ■ FM Radio ▶Position: STExit: SETUP Next: WXTV Rating ALL FV L S V D ■ TV-Y U ■ TV-Y7 U U ■ TV-G U ■ TV-PG U U U U U ■ TV-14 U U U U U ■ TV-MA U U U U Position: STExit: SETUP Next: WX
16 Document Number: PD196-167R2TV Menu Navigation- continuedDigital Mode Time Stamp ■ Time Zone Eastern ■ Daylight Savings On Position: STExit: SETUP Next: WXFM Radio Setup ■ Auto Program ▶ ■ Frequency 100.7 MHz ■ Add/Delete AddedPosition: STExit: SETUP Next: WXSETUP ■ Service Level Free ■ Picture ▶ ■ Sound ▶ ■ Channel Setup ▶ ■ Features ▶ ■ OSD Language English ■ Source Setup ▶ ■ FM Radio ▶Position: STExit: SETUP Next: WXFeatures ■ Power On Caption Mode Last ■ Auto Power On Disabled ■ Power Management Disabled ■ Bed A/B A ■ Caption Text Modes Disabled ■ Digital Captions ▶ ■ Digital Mode Time Setup ▶ ■ Diagnostics ▶ ■ Channel Up Power O Disabled ■ Channel to other Sources Enabled ■ Power on ARC Mode Last ■ Slot Standby Power Disabled ■ Standby Power LowPosition: STExit: SETUP Next: WXSource Setup ■ TV Enabled/No APO ■ Composite Video Disabled ■ S-VIDEO Disabled ■ Component 1 Disabled ■ Component 2 Disabled ■ HDMI 1 Disabled ■ HDMI 2 Disabled ■ PC-ANALOG Disabled ■ FM RADIO Disabled ■ Power on Source TVPosition: STExit: SETUP Next: WXAPO = Auto Power o if no videoDigital Captions ■ Mode Default ■ Font Default ■ Size Default ■ FG Color Default ■ BG Color Default ■ FG Opacity Default ■ BG Opacity DefaultPosition: STExit: SETUP Next: WXDiagnostics ■ Field ON Hours 132 ■ Field Powered Hours 265 ■ IO Firmware VSN 3.6 ■ Main Firmware VSN 2.90 ■ Pro:Idiom Support ■ Mpeg4 1.0 ■ Bluethooth Firmware VSN 1.0Exit: SETUPConrm FM Auto Program ■ Conrmation ▶Exit: SETUPYes SNo T
17 Document Number: PD196-167R2TV Menu ExplanationsMenu Item Explanation Sub-Item ExplanationSetupService Level 3 programmable Service Levels (banks of channels) plus a Disable service level.Picture Adjusts picture appearance. Brightness Adjust the brightness of the dark areas in the picture. 50% is the default value.Contrast Adjust the brightness of the light areas in the picture. 50% is the default value.Color Adjust the strength of the color in the picture.50% is the default value.Tint Adjust the tint of the picture. 50% is the default value.Color Temperature Opens a sub-menu that provides adjustment to the color balance of the picture. Sharpness Adjust the amount of detail present in the picture. 50% is the default value.PC Analog/HDMI Picture Opens a sub-menu that provides adjustment to the picture when the TV is used in computer mode.Temperature: Color warmth of picture.Clock: Adjust the horizontal screen size.Phase: Removes horizontal noise.ARC: Selects the screen size ratios.H-Position: Move Picture left or right.V-Position: Moves Picture up or down.Auto: Automatically adjust picture.Component Input Picture Opens a sub-menu that provides adjustment to the picture when viewing a component signal.Temperature: Color warmth of picture.Clock: Adjust the horizontal screen size.Phase: Removes horizontal noise.ARC: Selects the screen size ratios.H-Position: Move Picture left or right.V-Position: Moves Picture up or down.Auto: Automatically adjust picture.Sound Adjusts sound parameters. Balance Moves sound between the Left and Right Speakers.Minimum Volume Sets a minimum sound level. The TV’s sound level can not be adjusted below the minimum volume setting. The default value is 0.Maximum Volume Sets a maximum sound level. The TV’s sound level can not be adjusted above the maximum volume setting. The default value is 100.Power On Volume 6HWVDQLQLWLDOVRXQGOHYHOZKHQWKH79LVᚏUVWturned on. The default value is LAST.Internal Speaker Enable Opens a sub-menu that provide Disabling/Enabling the TV’s internal speakers. Items are shown in the default setting.TV EnabledComposite Video EnabledS-VIDEO EnabledComponent 1 EnabledComponent 2 EnabledHDMI 1 EnabledHDMI 2 EnabledPC-Analog EnabledFM Radio EnabledHDMI 1 Audio PortHDMI 2 Audio PortAudio ports HDMI 1 or 2, PC, or Component 1 or 2 can be used as inputs for HDMI sound.Composite/S-Video Mode Adjust Composite/S-Video for L+L, L+R, or R+R
18 Document Number: PD196-167R2TV Menu Explanations - continuedMenu Item Explanation Sub-Item ExplanationChannel Setup 3URJUDPVGLᚎHUHQWFKDQQHOVDQGVRXUFHVinto each of the 3 service levelsSignal 6HWVWKH79WRWXQHRIGLᚎHUHQWVLJQDOstyles: Air, Cable STD, Cable IRC, Cable HRCAuto Program TV automatically scans for active channels and memorizes them into the selected service level.Mode Scan for “Analog Only”, “Digital Only”, or “Analog and Digital” channels. Channel Sequence Set the sequence in which the TV displays channels.Interleave A+D, Analog and Digital appear grouped together. All A then D, Analog DSSHDUᚏUVWIROORZHGE\'LJLWDOAdditional Digital SignalProvides a second auto search for channels XVLQJDGLᚎHUHQWVLJQDOW\SHNone DisabledAir Antenna TuningCable STD Standard CableCable IRC Incremental Related CableCable HRC Harmonic Relate CableFree 2QHRIWKUHHGLᚎHUHQWVHUYLFHOHYHOVFKDQQHOEDQNVXVHGWRKROGGLᚎHUHQWgroupings of channels.&RQᚏUP$XWR3URJUDP Begins the Auto Program process. Auto Program requires 2 to 12 minutes to complete.Basic 2QHRIWKUHHGLᚎHUHQWVHUYLFHOHYHOVFKDQQHOEDQNVXVHGWRKROGGLᚎHUHQWgroupings of channels.&RQᚏUP$XWR3URJUDP Begins the Auto Program process. Auto Program requires 2 to 12 minutes to complete.Premium 2QHRIWKUHHGLᚎHUHQWVHUYLFHOHYHOVFKDQQHOEDQNVXVHGWRKROGGLᚎHUHQWgroupings of channels.&RQᚏUP$XWR3URJUDP Begins the Auto Program process. Auto Program requires 2 to 12 minutes to complete.Add/DeleteChannelsAdd or Delete Channels from a Service Level.Free Selects the Free service level edit menu.Basic Selects the Basic service level edit menu.Premium Selects the Premium service level edit menu.Analog Channel Selects the channel to be edited.Add/Delete Analog ChannelSets the indicated Analog channel to either “Deleted” or “Added”.Enable/Disable Digital ChannelDisplays a list of auto programmed Digital Channels. Each channel can be “Enabled” or “Disabled” for viewing.Clear Service LevelErase the programmed channels from a service level. “Blank” indicates an empty service level.Free Selects the Free Service level to Clear. &RQᚏUP&OHDU &RQᚏUPDWLRQ0HQXEHIRUHFOHDULQJVHUYLFHlevel.Basic Selects the Basic Service level to Clear. &RQᚏUP&OHDU &RQᚏUPDWLRQ0HQXEHIRUHFOHDULQJVHUYLFHlevel.Premium Selects the Premium Service level to Clear.&RQᚏUP&OHDU &RQᚏUPDWLRQ0HQXEHIRUHFOHDULQJVHUYLFHlevel.Copy Service LevelCopy an existing service level to a desti-nation service level.From: Sets the service level to be copied.To: Sets the service level to be programmed.&RQᚏUP&RS\ &RQᚏUPDWLRQ0HQXWREHIRUHFRS\LQJVHUYLFHlevels.
19 Document Number: PD196-167R2TV Menu Explanations - continuedMenu Item Explanation Sub-Item ExplanationParental Control Control Access of TV and Movie content.TV Rating Displays a list of parental TV viewing levels and allows for Blocking or Unblocking of TV content.MPAA Rating Displays a list of parental Movie viewing levels and allows for Blocking or Unblocking of Movie content.Advanced Rating Digital TV content Rating levels listing menu.Advanced Rating OptionEnable or Disable the Advanced Rating menu for digital TV content.Change Password Displays a menu and allows creation of a new parental password.Aux. Block Sources Enable or Disable the Aux. Block Source item to restrict program content inputted through the TV’s auxiliary inputs.Block Hours Sets the number of hours the parental lock is enabled.Parental Lock Enable or Disable the settings in the Pa-rental Control menus.Power On Channel TV displays a preset TV channel upon initial powering for each service level. Free TV powers on to this set channel number. Entering “Last” causes the TV to power on to the last channel viewed.Basic TV powers on to this set channel number. Entering “Last” causes the TV to power on to the last channel viewed.Premium TV powers on to this set channel number. Entering “Last” causes the TV to power on to the last channel viewed.Channel Lock Enable or Disable the Channel Lock feature. When Enabled the TV is locked to the last channel viewed. Prevents the TV from being tuned to any other channel or source. Disabled allows the TV to be tuned to other channels.Channel Memory OverrideEnable means the TV will tune to all pos-sible channels.Disable means the TV can only be tuned to channels in the currently selected service level.FeaturesPower on Caption ModeSets the Caption mode TV when the powers On. 2ᚎ 79SRZHUVRQZLWKFDSWLRQVGLVDEOHG/DVW 79SRZHUVRQLQODVWFDSWLRQVHWWLQJAuto Power On 79UHPDLQV2QDQGFDQQRWEHWXUQHG2ᚎPowerManagement79ZLOOWXUQ2ᚎDIWHUDSUHVHWSHULRGRIinactivity. Default is Disabled.Bed A/B Set the IR code for patient remote controls for either Bed A or Bed B. Bed A is the default setting.Caption Text Mode Teletext can be displayed on screen.(QDEOHG 7HOHWH[WWXUQHGRQ'LVDEOHG 7HOHWH[WRᚎNOTE: Teletext is not readily available in North America
20 Document Number: PD196-167R2TV Menu Explanations - continuedMenu Item Explanation Sub-Item ExplanationFeatures Digital Captions Customize the look of captions when tuned to a digital channel. Font Size Default, Small, Standard, LargeFont Style Default, Style 0 thru Style 7Foreground Color Default, White, Black, Red, Green, Blue, Yellow, Magenta, CyanBackground Color Default, White, Black, Red, Green, Blue, Yellow, Magenta, CyanForeground Opacity Default, Solid, Translucent, Transparent, FlashingBackground Opacity Default, Solid, Translucent, Transparent, FlashingEdge Color Default, White, Black, Red, Green, Blue, Yellow, Magenta, CyanEdge Style Default, None, Raised, Depressed, Uniform, Left Drop Shadow, Right Drop Shadow, Digital Mode Time SetupTiming information provided by Digital FKDQQHOVFDQEHVHWWRWKHVSHFLᚏF7LPHZone and also Daylight Savings.Time Zone Sets the current Time zone to Newfoundland, $WODQWLF(DVWHUQ&HQWUDO0RXQWDLQ3DFLᚏFAlaska, Hawaii.Daylight Saving 7XUQV'D\OLJKW6DYLQJ2Q2ᚎRUVHWWR$XWRdetect.Diagnostics A display menu that provides a readout of the TV’s internal operations.Field ON Hours Readout of the number of hours the TV has been turned On.Field Power Hours Readout of the number of hours the TV has been plugged into a powered outlet.IO Firmware VSN ,2ᚏUPZDUHYHUVLRQUHVLGHQWLQVLGHWKH79Main Firmware VSN 0DLQᚏUPZDUHYHUVLRQUHVLGHQWLQVLGHWKH79Pro:Idom Indicates presence of ProIdiom option.Mpeg4 Firmware Version of Mpeg4 decoderBluetooth Firmware VSNFirmware Version of Bluetooth decoderChannel Up 3RZHU2ᚎ:KHQ(QDEOHGWKH79VKXWVRᚎZKHQLWreaches the highest channel.Channel to Other SourcesWhen Enabled the External sources connected to the TV appear in the TV’s channel listing. If Disabled the External sources do not appear in the TV’s chan-nel listing.Power on ARC ModeThe TV can be set to turn On with a VSHFLᚏFSLFWXUH$VSHFW5DWLR/DVW14:9, 16:9, and 16:9 Panorama.Slot Standby Power7XUQVSRZHU2QRU2ᚎWR6ORWDQG6ORW2 accessory slots. Standby Power Places TV in Low Standby Power or Normal Standby Power Mode OSDLanguageThe menu system On Screen Display language settings are English, Spanish, and French
21 Document Number: PD196-167R2TV Menu Explanations - continuedMenu Item Explanation Sub-Item ExplanationSetupSource Setup The individual auxiliary in-put connectors on the back of the TV can be turned On RU2ᚎ7KHVRXUFHFDQDOVREHVHWWR$XWR3RZHU2ᚎ(APO) after 5 minutes of a no signal condition.TV Disabled, Enabled/APO, Enabled/No APOComposite Video Disabled, Enabled/APO, Enabled/No APOS-VIDEO Disabled, Enabled/APO, Enabled/No APOComponent 1 Disabled, Enabled/APO, Enabled/No APOComponent 2 Disabled, Enabled/APO, Enabled/No APOHDMI 1 Disabled, Enabled/APO, Enabled/No APOHDMI 2 Disabled, Enabled/APO, Enabled/No APOPC-ANALOG Disabled, Enabled/APO, Enabled/No APOFM RADIO Disabled, EnabledPower On Source Last, (Any Enabled Source)FM Radio FM Radio Setup menu Auto Program Automatic search for FM radio stations present on the connected coax cable.Frequency User selectable FrequencyAdd/Delete Add or Delete a Frequency
22 Document Number: PD196-167R2is page intentionally blank.
23 Document Number: PD196-167R2PDI Limited WarrantyPDI Communication Systems (PDI) warrants this product, except as set forth below, ONLY TO THE ORIGINAL PURCHASER to be FREE FROM DEFECTIVE MATERIAL AND WORKMANSHIP from the date of original purchase for a period of 2 years for parts and 2 years for labor (“e Warranty Period”). THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA, AND CANADA.If this product is found to be defective, PDI will repair or replace defective parts at no charge to the original owner during the warranty period. Such repair and replacement services shall be rendered by PDI or a PDI Authorized Servicer during normal business hours. Parts used for replacement or repair are warranted only for the remainder of the Warranty Period. To return a product for service please obtain a Return Material Authorization (RMA) from PDI. Products returned without a RMA will not be serviced. WHAT IS NOT COVEREDis limited warranty provided by PDI does NOT cover:1. Product which has been subject to abuse, accident, alteration, modication, tampering, negligence, misuse, faulty installation, lack of reasonable care, or if axed to any attachment not specied for the product;2. Product that has either the model number or serial number altered, tampered with, defaced or removed;3. Initial installation and removal for repair;4. Operational adjustments covered in the Owner’s Manual, normal maintenance, and cleaning;5. Damage that occurs in shipment, due to act of God, and cosmetic damage;6. Signal reception problems and failures due to line power surge;7. e cost for shipping the product to PDI’s service center;8. Accessories;9. Batteries;ere are no expressed warranties except as listed above.THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY, IS LIMITED TO THE DURATION OF THE EXPRESSED WARRANTY HEREIN. PDI SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL EXPRESSED AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an implied warranty lasts, so these limitations or exclusions may not apply to you. is warranty gives you specic legal rights and you may also have other rights which vary from state to state. Refurbished products carry a separate warranty. is warranty does not apply. For details of refurbished product warranty, please refer to the refurbished product warranty information packaged with each refurbished product.PDI Communication Systems, Inc.40 Greenwood LaneSpringboro, Ohio 45066PH: 937-743-6010 FX: 937-743-5664
24PDI Communication Systems, Inc.40 Greenwood LaneSpringboro, Ohio 45066

Navigation menu