| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1478465 |
| Application ID | qMrHVzR9B+k/rOQmmghc3Q== |
| Document Description | Users manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 140.32kB (1754054 bits) |
| Date Submitted | 2011-06-07 00:00:00 |
| Date Available | 2011-06-08 00:00:00 |
| Creation Date | 2011-05-20 16:30:45 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2011-05-20 16:30:45 |
| Document Title | PDI-CV2600 & PDI-CV3200 User Manual V2.0.pdf |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | Administrator |
PDI Communication Systems
26â and 32â
Healthcare LCD TV
User Manual
Models
PDI-CV2600
PDI-CV3200
Document Number:
Number: PD196-167R2
PD196-167R2
Document
Healthcare Grade Television
The PDI Healthcare series television is specifically designed for installation
and use in a healthcare environment. The TVâs special design and safety
features have been investigated by the Underwriters Laboratory and
Listed for use in Hospitals, Nursing Facilities, Dialysis Clinics, and similar
healthcare services.
CAUTION
RISK OF ELECTRIC
SHOCK
DO NOT OPEN !
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
SERVICING
User Servicing
If your product is not operating correctly or exhibits a marked change in
performance and you are unable to restore normal operation by following the
detailed procedure in its operating instructions, do not attempt to service it
yourself as opening or removing covers may expose you to dangerous voltage
or other hazards. Refer all servicing to qualified service personnel.
7KLVOLJKWQLQJĂDVKZLWKDUURZKHDGV\PERO
ZLWKLQDQHTXLODWHUDOWULDQJOHLVLQWHQGHGWR
DOHUWWKHXVHUWRWKHSUHVHQFHRIXQLQVXODWHG
GDQJHURXVYROWDJHZLWKLQWKHSURGXFWÂśV
HQFORVXUHWKDWPD\EHRIVXIÂżFLHQWPDJQLWXGHWR
FRQVWLWXWHDULVNRIHOHFWULFVKRFNWRSHUVRQV
Damage Requiring Service
Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
t
When the power supply cord or plug is damaged.
t
If liquid has been spilled, or objects have fallen into the product.
t
If the product has been exposed to rain or water.
t
If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions as an improper adjustment of other controls
may result in damage and will often require extensive work by a
qualified technician to restore the product to its normal operation.
t
If the product has been dropped or damaged in any way.
t
When the product exhibits a distinct change in performance which
indicates a need for service.
7KHH[FODPDWLRQSRLQWZLWKLQDQHTXLODWHUDO
WULDQJOHLVLQWHQGHGWRDOHUWWKHXVHUWR
WKHSUHVHQFHRILPSRUWDQWRSHUDWLQJDQG
PDLQWHQDQFH VHUYLFLQJ LQVWUXFWLRQVLQWKH
OLWHUDWXUHDFFRPSDQ\LQJWKHSURGXFW
WARNING: To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
WARNING: To prevent injury, this apparatus must be
securely attached to the floor/wall in accordance with the
installation instructions.
Replacement Parts
WARNING: Do not install this equipment in a confined
space such as a bookcase or similar unit.
When replacement parts are required, be sure the service technician has
used replacement parts specified by the manufacturer or have the same
characteristics as the original part. Unauthorized substitutions may result in
fire, electric shock, or other hazards.
CAUTION: Do not block ventilation openings. Install in
accordance with the manufacturerâs instructions.
Safety Check
REGULATORY INFORMATION
FCC Part 15
Cleaning & Disinfecting
Upon completion of any service or repairs to this product, ask the service
technician to perform safety checks to determine that the product is in safe
operating conditions.
t
t
t
t
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, many cause harmful interference to radio
communications.
However, there is not guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
t
Reorient or relocate the receiving antenna.
t
Increase the separation between the equipment and receiver.
t
Connect the equipment into an outlet on a circuit different from
that to which the receive is connected.
t
Consult the dealer or an experienced radio/TV technician for help.
Unplug the TV Before Cleaning.
Use a soft damp cloth to clean.
Do not use harsh chemicals such as solvents.
Wipe off water droplets from the cabinet and screen as soon as possible as they may leave spots.
Modifications
Any changes or modifications made to this device that are not expressly approved by PDI may void the userâs authority to operate the equipment.
Cables
Connections to this device must be made with shielded cables with metallic
RFI/EMI connector hoods to maintain compliance with FCC Rules and
Regulations.
Document Number: PD196-167R2
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturerâs instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or
sold with the apparatus. When a cart
is used, use caution when moving the
cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
15. This appliance should be mounted to a wall or
ceiling only as recommended by the manufacturer.
16. Care should be taken so that objects do no fall
and liquids are not spilled into the enclosure through
openings.
17. If an outside antenna or cable system is connected
to the video product, be sure the antenna or cable
system is grounded so as to provide some protection
against voltage surges and built-up static charges.
Section 810 of the National Electrical Code, ANSI/
NFPA 70, provides information with respect to proper
grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode. See
Figure A.
NEC â NATIONAL ELECTRICAL CODE
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810 â 20)
GROUNDING CONDUCTORS
(NEC SECTION 810 â 21)
GROUND CLAMPS
FIG. A
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NOTE: This reminder is provided to call the CATV
system installerâs attention to article 820-40 of the NEC
that provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as
close to the point of cable entry as practical.
Document Number: PD196-167R2
OPTIONAL ACCESSORIES
The following optional accessories are available for your PDI Healthcare television.
Patient Remotes
Programming Remotes
POWER
POWER
SETUP
MUTE
TV/FM
TV/AV
CH LIST
POWER
MUTE
SLEEP
LAST
CH
OK
VOL
VOL
OK
TV/AV
CH
Page
Up
SSM
PSM
SAP
CH
VOL
Page
Down
MTS/SAP.
PSM.
CC.
MUTE
CV2600 Table Stand CV1003
TV/FM
CC
ARC
LAST
TEXT
SIZE
INDEX
REVEAL
HOLD
MODE
MIX
UPDATE
CODE
SLEEP LAST
CC
ARC
SAP
OK
TV/FM
TV/AV
SUBPAGE
SLEEP
ARC
SETUP
CV1001 PD108-420
PD108-421 PD108-427
CV1000 (Not Pictured)
CV3200 Table Stand CV1004
INSTALLATION
3â min.
LOCATION
Locate a mounting position on the foot wall in front of
the hospital bed. Other locations may be used depending
upon the mounting means and room type. Healthcare
televisions are normally mounted near the ceiling to
provide needed clearance. A minimum 3 inch spacing is
recommened for cooling.
Note: Ceiling mounted fluorescent lights and windows
may produce unwanted glare and should be considered
when selecting a mounting location.
200 mm
200 mm
M4 Screws Required
TV MOUNT
The PDI Healthcare television utilizes a VESA pattern.
Selection of an appropriate mount will depend primarily
upon the mountâs capacity and intended functionality.
Install the TV as recommended by the mountâs
manufacturer. Please note the correct mounting screw
size requirements.
200 mm
400 mm
PDI also offers compatible TV mounts. Please refer to
the installation instructions that pack with each mount
for additional details.
PDI TV MODEL
MOUNT MODEL
CV2600
PD168-033
CV3200
PD168-204
CV2600
CV3200
M6 Screws Required
Document Number: PD196-167R2
PILLOW SPEAKER CONNECTIONS
PILLOW SPEAKER STYLES
Control of the TV is possible using either a single-button Analog or
multi-button Digital style pillow speaker (neither supplied with TV).
TV PILLOW SPEAKER WIRING
The PDI Healthcare television series utilizes the industry standard
3-wire interface via a 1/4 inch stereo jack located on the back of the TV.
Additionally, the TV employes a universal pillow speaker interface that
can be configured to operate with many different model pillow speakers.
Move the pillow speaker slide switch located next to the Pillow Jack
to match the appropriate style pillow speaker. Refer to your nurse call
system wiring instructions for the pillow speakerâs bed side connections.
Slide Switch Position
CR
OFF
CP
CZ
TV
Pillow Speaker Type
RCA
Disables Pillow Speaker Control
Phillips
Zenith and Analog
ANALOG
DIGITAL
DATA
SOUND
CR OFF CP CZ
COMMON
TO BEDSIDE
CONNECTION
PILLOW
TV CONNECTION
WARNING: Do Not Ground the Common wire
connection. Grounding the connection will
by-pass the TVâs pillow speaker isolation circuit
and increase the risk of electrical shock.
Document Number: PD196-167R2
TV CONTROLS & CONNECTIONS
TV Controls
Standard TV controls are located on the TVâs lower right cabinet side.
Basic control is provided.
TV/AV
Switches the TV between various Enabled
Sources. Press the button once to verify the current
sources. Press the button additional times to advance to
the next active source.
CC
Closed Caption (Sub-Title) control. Press the
button once to verify the current Closed Caption mode.
Press the button additional times to advance to the next
Closed Caption Mode.
CHŸ/ź Selects the next or previous channel. If a menu
item is active, selects the next or previous menu item.
VOLŸ/ź Increases or decreases the volume. If a menu
item is active, adjusts the menu items settings.
POWER
Turns TV On and Off.
TV Connections
The PDI CV series televisions offer connection jacks for many
different types of external devices such as DVD players, Game
Boxes, and other similar devices. Connections are located along
the back edge of the Television.
TV Connectors
Document Number: PD196-167R2
TV Connectors
ANT TV/FM
)&RQQHFWRULQSXWMDFNIRUWKHKRVSLWDOFDEOH79VLJQDO127( )0UDGLRFKDQQHOV
DUHDOVRUHFHLYHGRQWKLVLQSXW
03(*8SJUDGH
86%3RUWIRUVHUYLFHXVHRQO\
CLONING
86%3RUWIRUFORQLQJWKH797KH79FDQEHSURJUDPPHG FORQHG IURPLQIRUPDWLRQ
VWRUHGRQD86%)ODVK'ULYH
IN - L, R
&RPSRQHQW/HIWDQG5LJKWDXGLRLQSXWMDFNV
IN - Y, PB, PR
&RPSRQHQW9LGHRLQSXWMDFNV
,1&RPSRVLWH
&RPSRVLWH9LGHRLQSXWMDFN
,169LGHR
69LGHR9LGHRLQSXWMDFN
IN - L, R
/HIWDQG5LJKW$XGLRLQSXWMDFNVFRPPRQIRUERWK&RPSRVLWHRU69LGHRLQSXWV
OUT
287&RPSRVLWH9LGHR
'HPRGXODWHG79VLJQDO&RPSRVLWHRXWSXWYLGHR
287&RD[LDO
'HPRGXODWHG79VLJQDO'LJLWDODXGLRRXWSXW
OUT - L, R
'HPRGXODWHG79VLJQDO/HIWDQG5LJKWRXWSXWDXGLR
HDMI2
+'0,VLJQDOLQSXWMDFN,QSXWIRUWKHKLJKTXDOLW\+'0,VLJQDO
HDMI1
+'0,VLJQDOLQSXWMDFN,QSXWIRUWKHKLJKTXDOLW\+'0,VLJQDO
VGA
9*$9LGHR,QSXWMDFN7KH79FDQEHXVHGDVDFRPSXWHUPRQLWRU
VGA AUDIO
3&$XGLR,QSXWMDFN7KH79ÂśVLQWHUQDOVSHDNHUVFDQEHXVHGIRUFRPSXWHUVRXQG
COMM - CCI
&RPSXWHU&RQWURO,QWHUIDFHMDFNNOTE: DO NOT FRQQHFWWRDKRVSLWDOÂśVGDWD
QHWZRUNDVGDPDJHZLOOUHVXOWWRWKHO79
COMM - MTI
0XOWLSOH7HOHYLVLRQ,QWHUIDFHMDFN8VHZLWKH[WHUQDOFRQWUROER[HV NOTE: DO
NOTFRQQHFWWRDKRVSLWDOÂśVGDWDQHWZRUNDVGDPDJHZLOOUHVXOWWRWKH79
EXT +5V
([WHUQDO9,QSXWIRU79VHUYLFHGLDJQRVWLFV
HOUR METER
'LJLWDO5HDGRXWRIWKH79ÂśVKRXUV
PILLOW
3LOORZ6SHDNHU-DFN6HHPILLOW SPEAKER CONNECTIONSIRUGHWDLOV
CR-OFF-CP-CZ
3LOORZ6SHDNHUFRPSDWLELOLW\VZLWFK6HHPILLOW SPEAKER CONNECTIONSIRU
GHWDLOV
Document Number: PD196-167R2
Programming the TV
SETUP
Connect the TV to a Cable TV signal before proceeding. Verify the
handheld remote control operates the TV.
1.
Press the setup button on the remote.
2.
From the Setup menu, select Channels.
â
â
â
â
â
â
â
â
Service Level
Picture
Sound
Channels
Features
OSD Language
Sources
FM Radio
Free
âś
âś
âś
âś
English
âś
âś
Position: ST
Exit: SETUP
Next: WX
Channel Setup
3.
In the Channels menu, select Signal. Set the signal to one appropriate to your healthcare facility. The possible choices are,
&DEOH67' Standard Cable TV
&DEOH,5& Incrementally Related Carrier
&DEOH+5& Harmonically Related Carrier
$LU
Air (Antenna)
4.
In the Channels menu, select Auto Program.
â
â
â
â
â
â
â
â
â
Signal
Auto Program
Add/Delete Channels
Clear Service Level
Copy Service Level
Parental Control
Power On Channel
Channel Lock
Channel Memory Override
Cable STD
âś
âś
âś
âś
âś
âś
Disabled
Enabled
Position: ST
Exit: SETUP
5.
In the Auto Program menu, select Mode. The TV can be set
to search and locate different styles of TV signals; $QDORJ2QO\,
'LJLWDO2QO\, or both $QDORJDQG'LJLWDO channels. Select the
style of signal.
6.
In the Auto Program menu, select Channel Sequence and
select the manner in which channels are viewed. The possible
selections are:
,QWHUOHDYH$'
Analog and Digital appear grouped together
$OO$WKHQ'
Analog appear first, followed by Digital
7.
The Additional Digital Signal selection allows for auto programming of a second block of channels using a different signal
type. For example, first Auto Program the TV for CATV STD
signals, then use the $GGLWLRQDO'LJLWDO6LJQDO set to AIR provides
a second auto programming of air type signals to be included
in addition to the channels found during normal Auto Program
searching into the same Service Level.
8.
The TV offers 3 discrete groups of channels or Service Levels.
Free, Basic, or Premium can each be programmed and used as
needed. Select the desired Service Level to program.
9.
Press the
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.4
Linearized : Yes
XMP Toolkit : 3.1-701
Producer : Acrobat Distiller 7.0 (Windows)
Create Date : 2011:05:20 16:30:45+08:00
Modify Date : 2011:05:20 16:30:45+08:00
Metadata Date : 2011:05:20 16:30:38+08:00
Creator Tool : PScript5.dll Version 5.2
Page Image Page Number : 1, 2
Page Image Format : JPEG, JPEG
Page Image Width : 256, 256
Page Image Height : 256, 256
Page Image : (Binary data 14511 bytes, use -b option to extract), (Binary data 11150 bytes, use -b option to extract)
Document ID : uuid:FB12B770BB82E011BE5082DE6FE4801D
Instance ID : uuid:80162176-8663-4925-99da-37f6d242e647
Derived From Instance ID : uuid:65738d27-3b28-43ef-8cd2-e3c922589479
Derived From Document ID : xmp.did:AECC1B74072068118083DB278CE3D265
Derived From Rendition Class : proof:pdf
Doc Change Count : 48896
Format : application/postscript
Creator : Administrator
Title : PDI-CV2600 & PDI-CV3200 User Manual V2.0.pdf
Page Count : 24
Author : Administrator
EXIF Metadata provided by EXIF.tools