PEAG JLab Audio BAND2 Bluetooth Neckband Headphones User Manual EBJBUDSBANDRBLK62 QSG

PEAG, LLC dba JLab Audio Bluetooth Neckband Headphones EBJBUDSBANDRBLK62 QSG

user manual

OUTSIDEINSIDEFor full User Manual + other JLab products visitContact UsIf you’re unsatisfied with your purchase, please contact us and we’ll take careof you! You can contact our US based customer support team:Website: jlabaudio.com/contactEmail: support@jlabaudio.comPhone U.S.: +1 (405) 445-7219 (M-F 8am-5pm PT) Phone U.K.: +44 (20) 3884 3322 (M-F 1600-0100 GMT)Visit jlabaudio.com/warranty to initiate a return or exchange.Battery Caution & Disposal InformationPlease take care of your battery. Do not; disassemble, burn, puncture, crushor bend your battery. Improper operation of the battery may product smoke.In such an event, ventilate the area. Extinguish any flames with carbon dioxide, dry-powder fire extinguisher, or cover with sand or mud. Take care to avoid conditions of excessive moisture for prolonged periods and do not immerse.Do not expose to temperatures above 50°C/122°F. Charge battery fully before storage or if stored for longer than three months.DisposalAt the end of its life, please take care to dispose of this product responsibly. Electronic products and batteries contain materials that can be harmful to the environment. Please do not dispose to unsorted waste. Take your electronic waste to a designated collection or recycling facility to be recycled properly.Your local council authority will be able to tell you where your nearest facilities are. There may be one at your local supermarket.The symbol above indicates that this product and/or battery should not be disposed of with household waste. When you decide to dispose of this product and/or its battery, do so in accordance with local environmental laws and guidelines.EU CompliancePEAG LLC dba JLab Audio hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the RED directive.A copy of the EU Declaration of Conformity is available at jlabaudio.com/complianceJLab Audio 2281 Las Palmas Drive, Suite 101, Carlsbad, CA 92011, USAUS ComplianceFCC InformationThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.If you cannot eliminate the interference, the FCC requires that you stop using your product. Changes or modifications not expressly by the party responsible for compliance could void the user’s authority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.FCC ID: 2AHYVBANDWith purchase. Visit jlabaudio.com/pandoraoffer3 MONTHSFREEWarm-up Your HeadphonesOptional: Burn-in your audio equipment with the JLab Audio App or access the burn-in method at: jlabaudio.com/burninJLab Audio + Burn-in ToolQUICK START GUIDEWIRELESSJBUDSBANDGOES withSMART ASSISTANTS ANDROID + APPLE8+ HOURSof PLAYTIME*NECKBANDTurn on Bluetooth inyour device settings. Select “JLab JBuds Band” in your device'sBluetooth settings to connect.Lights will slow blink bluewhen Bluetooth is paired. Press and holdbutton for10 seconds.Release.Lights willflash blue/red..1 2 3BLUETOOTH PAIRING FITTINGChoose ear tip size. 1POWER ON/OFF:Click and hold 2 seconds.PLAY/PAUSE/ANSWER/HANG UP CALLS:Click once.REJECT INCOMING CALL:Click and hold 1 secondACTIVATE SIRI (iOS) OR“OK GOOGLE” (ANDROID):Click twice.BLUETOOTH PAIRING:See Bluetooth Pairing page.BUTTON FUNCTIONSVOLUME UP:Click once.TRACK FORWARD:Click and hold 2+ seconds.VOLUME DOWN:Click once.TRACK BACKWARD:Click and hold 2+ seconds. SIGNATURE (One Beep)JLab C3™ signature soundwith amplified vocals and bass BALANCED (Two Beeps)Even sound with no additionalsound enhancements BASS BOOST (Three Beeps)Amplified bass and sub-bassQuick press both buttonsfor different EQ settings(JBuds Band will cycle 3 EQ settings)EQUALIZER MODES2Move the earbud to desired location from the Adjustable Tip Placement. Adjustable Tip Placemene.CHARGING1Open USB door andconnect the cable toa computer or USBpower source to charge.2Light will turn solid red when charging and turn blue when fully charged.ge.2red CHARGINGFULLYCHARGEDBluetoothSettings BluetoothSettingsJLab JBuds Band3Rest the band around the neck with the controls facing the right hand side.FRONTBACKDate: 09.26.18PROJECT: JBuds Band Wireless QSGSTOCK: 157g, MATTEINK: 4/4 CMYK / CMYKFLAT SIZE: 15.5” x 5.375”FOLDED SIZE: 3.875” x 5.375”

Navigation menu