PEAG JLab Audio BAND2 Bluetooth Neckband Headphones User Manual EBJBUDSBANDRBLK62 QSG
PEAG, LLC dba JLab Audio Bluetooth Neckband Headphones EBJBUDSBANDRBLK62 QSG
user manual
OUTSIDE
INSIDE
For full User Manual +
other JLab products visit
Contact Us
If you’re unsatisfied with your purchase, please contact us and we’ll take care
of you! You can contact our US based customer support team:
Website: jlabaudio.com/contact
Email: support@jlabaudio.com
Phone U.S.: +1 (405) 445-7219 (M-F 8am-5pm PT)
Phone U.K.: +44 (20) 3884 3322 (M-F 1600-0100 GMT)
Visit jlabaudio.com/warranty to initiate a return or exchange.
Battery Caution & Disposal Information
Please take care of your battery. Do not; disassemble, burn, puncture, crush
or bend your battery. Improper operation of the battery may product smoke.
In such an event, ventilate the area. Extinguish any flames with carbon dioxide,
dry-powder fire extinguisher, or cover with sand or mud. Take care to avoid
conditions of excessive moisture for prolonged periods and do not immerse.
Do not expose to temperatures above 50°C/122°F. Charge battery fully before
storage or if stored for longer than three months.
Disposal
At the end of its life, please take care to dispose of this product responsibly.
Electronic products and batteries contain materials that can be harmful to the
environment. Please do not dispose to unsorted waste. Take your electronic
waste to a designated collection or recycling facility to be recycled properly.
Your local council authority will be able to tell you where your nearest facilities are.
There may be one at your local supermarket.
The symbol above indicates that this product and/or battery should not be disposed
of with household waste. When you decide to dispose of this product and/or its
battery, do so in accordance with local environmental laws and guidelines.
EU Compliance
PEAG LLC dba JLab Audio hereby declares that this device is in compliance with
the essential requirements and other relevant provisions of the RED directive.
A copy of the EU Declaration of Conformity is available at jlabaudio.com/compliance
JLab Audio 2281 Las Palmas Drive, Suite 101, Carlsbad, CA 92011, USA
US Compliance
FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
If you cannot eliminate the interference, the FCC requires that you stop using your
product. Changes or modifications not expressly by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
FCC ID: 2AHYVBAND
With purchase. Visit jlabaudio.com/pandoraoffer
3 MONTHS
FREE
Warm-up Your Headphones
Optional: Burn-in your audio equipment with the JLab Audio App
or access the burn-in method at: jlabaudio.com/burnin
JLab Audio + Burn-in Tool
QUICK START GUIDE
WIRELESS
JBUDSBAND
GOES with
SMART ASSISTANTS
ANDROID + APPLE
8+ HOURS
of PLAYTIME*
NECKBAND
Turn on Bluetooth in
your device settings.
Select “JLab JBuds Band” in your device's
Bluetooth settings to connect.
Lights will slow blink blue
when Bluetooth is paired.
Press and hold
button for
10 seconds.
Release.
Lights will
flash blue/red.
.
1 2 3
BLUETOOTH PAIRING FITTING
Choose ear tip size.
1
POWER ON/OFF:
Click and hold 2 seconds.
PLAY/PAUSE/ANSWER/
HANG UP CALLS:
Click once.
REJECT INCOMING CALL:
Click and hold 1 second
ACTIVATE SIRI (iOS) OR
“OK GOOGLE” (ANDROID):
Click twice.
BLUETOOTH PAIRING:
See Bluetooth Pairing page.
BUTTON FUNCTIONS
VOLUME UP:
Click once.
TRACK FORWARD:
Click and hold 2+ seconds.
VOLUME DOWN:
Click once.
TRACK BACKWARD:
Click and hold 2+ seconds.
SIGNATURE
(One Beep)
JLab C3™ signature sound
with amplified vocals and bass
BALANCED
(Two Beeps)
Even sound with no additional
sound enhancements
BASS BOOST
(Three Beeps)
Amplified bass and sub-bass
Quick press both buttons
for different EQ settings
(JBuds Band will cycle 3 EQ settings)
EQUALIZER MODES
2Move the earbud to desired location from
the Adjustable Tip Placement.
Adjustable Tip Placeme
n
e
.
CHARGING
1Open USB door and
connect the cable to
a computer or USB
power source to charge.
2Light will turn solid red
when charging and
turn blue when
fully charged.
g
e.
2
r
ed
CHARGING
FULLY
CHARGED
Bluetooth
Settings Bluetooth
Settings
JLab JBuds Band
3Rest the band around the neck with
the controls facing the right hand side.
FRONTBACK
Date: 09.26.18
PROJECT: JBuds Band Wireless QSG
STOCK: 157g, MATTE
INK: 4/4 CMYK / CMYK
FLAT SIZE: 15.5” x 5.375”
FOLDED SIZE: 3.875” x 5.375”