PEGATRON RV340W Wireless VPN Router User Manual rv340W qsg en

Download:
Mirror Download [FCC.gov]
Document ID	3101838
Application ID	X6uqACa1J1YRFSqhYQJVYA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.99kB (187353 bits)
Date Submitted	2016-08-17 00:00:00
Date Available	2017-05-10 00:00:00
Creation Date	2013-10-13 06:05:22
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2016-02-25 19:54:16
Document Title	rv340W_qsg_en.fm
Document Creator	FrameMaker 11.0.2
Document Author:	lisutera

Quick Start Guide
Cisco RV340W Router
Package Contents
• Cisco RV340W Router
• Power Adapter
• Ethernet Cable
• This Quick Start Guide
• Pointer Card
• Technical Support Contact Card
• Console RJ-45 Cable
Welcome
The Cisco RV340W series of routers provide reliable internet access
connectivity for small businesses. All of the Cisco RV340W series models
supports two connections to one internet service provider, delivering high
performance by using load balancing, or to two different providers to
deliver business continuity.
• Dual Gigabit Ethernet WAN ports allow load balancing and business
continuity.
• Affordable, high-performance Gigabit Ethernet ports enable rapid
transfer of large files, supporting multiple users.
• Dual USB ports support a 3G/4G modem or flash drive. The WAN can
also fail over to the 3G/4G modem connected to the USB port.
• SSL VPN and site-to-site VPN enable highly secure connectivity
• Stateful packet inspection (SPI) firewall and hardware encryption
provide strong security.
• A 4 LAN port switch and a WLAN access point.
This Quick Start Guide describes how to install your Cisco RV340W and
launch the web-based Device Manager.
Installing the Cisco RV340W
To prevent the device from overheating or being damaged:
• Ambient Temperature—Do not operate the device in an area that
exceeds an ambient temperature of 104°F (40°C).
• Air Flow—Be sure that there is adequate airflow around the device. If
wall mounting the firewall, make sure that the heat dissipation holes are
to the side.
• Circuit Overloading—Adding the device to the power outlet must not
overload that circuit.
• Mechanical Loading—Be sure that the device is level, stable and
secured to avoid any hazardous conditions and prevent it from sliding
or shifting out of position. Do not place anything on top of the firewall,
as the excessive weight may damage it.
Cisco RV340W Router Quick Start Guide
Desktop Mounting
For desktop mounting, place the device on a flat surface so that it sits on its
four rubber feet.
WARNING For safety, ensure that the heat dissipation holes are facing
sideways.
Cisco RV340W Router Quick Start Guide
2
Cisco RV340W Features
Front Panel
PWR
Off when the device is powered off.
Solid green when the device is powered on and
booted.
Flashing green when the device is booting up.
DIAG
Off when the system is on track to bootup.
Slow blinking red (1Hz) when the firmware
upgrade is in progress.
Fast blinking red (3Hz) when the firmware
upgrade is failing.
Solid red when the system failed to boot-up with
both active and inactive images or in rescue
mode.
LINK/ACT of
Off when there is no Ethernet connection.
WAN1, WAN2 and
LAN1-4
Solid green when the GE Ethernet link is on.
GIGABIT of WAN1,
Solid green when at 1000M speed.
WAN2 and LAN14
Off when at non-1000M speed.
DMZ
Solid green when the DMZ is enabled.
Flashing green when the GE is sending or
receiving data.
Off when the DMZ is disabled.
VPN
Off when no VPN tunnel is defined, or all defined
VPN tunnels have been disabled.
Solid green when at least one VPN tunnel is up.
Flashing green when sending or receiving data
over VPN tunnel.
Solid amber when no enabled VPN tunnel is up.
Cisco RV340W Router Quick Start Guide
Wireless
LED is on when the internal access point is
enabled.
LED is off when the internal access point is
disabled.
USB1 and USB2
Off when no USB device is connected, or is
inserted but not recognized.
Solid green when the USB dongle is connected
to the ISP successfully. USB storage is
recognized.
Flashing green when sending or receiving data.
Solid amber when the USB dongle is recognized
but fails to connect to ISP (no IP address is
assigned). The USB storage access has errors.
RESET
To reboot, or reboot and restore defaults:
• To reboot the router and retain the current
configuration, press and hold RESET for 3
seconds to 10 seconds (maximum), using a
paper clip or a pen tip.
• To reboot the router and restore to the
factory default settings, press and hold in the
RESET button for more than 10 seconds.
Changes made to the original configuration
of the router are lost.
Back Panel
POWER—Toggles power to the device on or off.
12VDC (2.5A)—Power port that connects the device to the provided
12VDC, 2.5 amp power adapter.
USB 1—Type A USB port that supports flash drives and 3G/4G/LTE USB
dongles. Caution: Use only the power supply provided with the device;
using other power supplies may cause the USB dongle to fail.
Console Port—The router console port is designed for a serial cable
connection to a terminal or a computer that is running a terminal emulation
program.
Cisco RV340W Router Quick Start Guide
Side Panel
USB 2—Type A USB port that supports flash drives and 3G/4G/LTE USB
dongles. Caution: Use only the power supply provided with the device;
using other power supplies may cause the USB dongle to fail.
Kensington Lock Slot - Lock slot on the right side to secure the device
physically, using the Kensington lock-down equipment.
Cisco RV340W Router Quick Start Guide
Connecting the Equipment
Connect a configuration terminal (PC) to the device by using a LAN port.
The terminal must be in the same wired subnetwork as the device to
perform the initial configuration. As part of the initial configuration, the
device can be configured to allow remote management.
To connect a computer to the device:
STEP 1 Power off all equipment, including the cable or DSL modem, the
computer, and this device.
STEP 2 Use an Ethernet cable to connect your cable or DSL modem to the
WAN port on this device.
STEP 3 Connect another Ethernet cable from one of the LAN (Ethernet)
ports to the Ethernet port on the computer.
STEP 4 Power on the WAN device and wait until the connection is active.
STEP 5 Connect the power adapter to the 12VDC port of this device.
CAUTION
Use only the power adapter that is supplied with the device.
Using a different power adapter could damage the device or
cause the USB dongles to fail.
The power switch is on by default. The power light on the front
panel is solid green when the power adapter is connected
properly and the device is finished booting.
STEP 6 Plug the other end of the adapter into an electrical outlet. Use the
plug (supplied) specific to your country.
STEP 7 Continue with the instructions in the Using the Setup Wizard to
configure the device.
Cisco RV340W Router Quick Start Guide
4
Using the Setup Wizard
The Setup Wizard and Device Manager are supported on Microsoft
Internet Explorer, Mozilla Firefox, Apple Safari, and Google Chrome.
To configure the device using the Setup Wizard, follow these steps:
STEP 1 Power on the PC that you connected to the LAN1 port in Step 3 of
the Connecting Equipment section. Your PC becomes a DHCP
client of the device and receives an IP address in the 192.168.1.xxx
range.
STEP 2 Launch a web browser.
STEP 3 In the address bar, enter the default IP address of the device,
https://192.168.1.1. A site security certificate message is
displayed. The Cisco RV340W uses a selfsigned security
certificate. This message appears because the device is not
known to your computer.
STEP 4 Click Continue to this website to continue. The sign-in page
appears.
STEP 5 Enter the username and password. The default username is cisco.
The default password is cisco. Passwords are case-sensitive.
STEP 6 Click Log In. The Router Setup Wizard is launched.
STEP 7 Follow the on-screen instructions to set up your device. The Router
Setup Wizard should detect and configure your connection. If it is
unable to do so, it asks you for information about your internet
connection. Contact your ISP for this information.
STEP 8 Change the password as instructed by the Router Setup Wizard or
follow the instructions in the Changing the Administrator Username
and Password section. Log in to the device with the new username
and password.
NOTE We recommend that you change the password. You are
required to change the password before enabling features such as
remote management.
The Device Manager Getting Started page appears. It displays the
most common configuration tasks.
STEP 9 Click one of the tasks listed in the navigation bar to complete the
configuration.
Cisco RV340W Router Quick Start Guide
STEP10 Save any additional configuration changes and log out of the
device manager.
Changing the Administrator Username and Password
To change the Administrator username and password on the device:
STEP 1 From the Getting Started page, select Change Administrator
Password or select System Configuration > User Accounts from
the navigation bar.
STEP 2 Check a username from the Local User Membership list and click
Edit.
STEP 3 Enter the Username.
STEP 4 Enter the Password.
STEP 5 Confirm the Password.
STEP 6 Check Group (admin, oper, test-group) in the Password Strength
Meter.
STEP 7 Click Save.
Troubleshoot Your Connection
If you cannot access your device by using the Setup Wizard, the device
may not be reachable from your computer. You can test network
connections by using ping on a computer running Windows:
STEP 1 Open a command window by using Start > Run and enter cmd.
STEP 2 At the Command window prompt, enter ping and the device IP
address. For example, ping 192.168.1.1 (the default static IP
address of the device).
If you can reach the device, you should get a reply similar to the
following:
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time<1ms TTL=128
If you cannot reach the device, you should get a reply similar to the
following:
Pinging 192.168.1.1 with 32 bytes of data:
Request timed out.
Cisco RV340W Router Quick Start Guide
Possible Causes and Resolutions
Bad Ethernet connection:
Check the LEDs for the proper indications. Check the connectors of the
Ethernet cable to ensure that they are firmly plugged into the device
and your computer.
Wrong or conflicting IP address:
Verify that you are using the correct IP address of the device.
Verify that no other device is using the same IP address as this device.
No IP route:
If the router and your computer are in different IP subnetworks, remote
access must be enabled. You need at least one router on the network
to route the packets between the two subnetworks.
Unusually long access time:
Adding new connections may take 30–60 seconds for the affected
interfaces and LAN to become operational.
10
Cisco RV340W Router Quick Start Guide
5
Where to Go From Here
Support
Cisco Support
Community
www.cisco.com/go/smallbizsupport
Cisco Support and
Resources
www.cisco.com/go/smallbizhelp
Phone Support Contacts
www.cisco.com/en/US/support/
tsd_cisco_small_business
_support_center_contacts.html
Cisco Firmware
Downloads
www.cisco.com/go/smallbizfirmware
Cisco Open Source
Request
www.cisco.com/go/
smallbiz_opensource_request
Cisco Partner Central
(Partner Login Required)
www.cisco.com/web/partners/sell/smb
Select a link to download firmware for Cisco
products. No login is required.
Product Documentation
Cisco RV340
www.cisco.com/go/RV340W
For EU Lot 26 related test results, see www.cisco.com/go/eu-lot26-results
Cisco RV340W Router Quick Start Guide
11
Americas Headquarters
Cisco Systems, Inc.
www.cisco.com
Cisco has more than 200 offices worldwide.
Addresses, phone numbers, and fax numbers
are listed on the Cisco website at
www.cisco.com/go/offices.
78-100852-01
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates
in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL:
www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their
respective owners. The use of the word partner does not imply a partnership relationship
between Cisco and any other company. (1110R)
© 2016 Cisco Systems, Inc. All rights reserved.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Language                        : en
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Format                          : application/pdf
Creator                         : lisutera
Title                           : rv340W_qsg_en.fm
Create Date                     : 2013:10:13 06:05:22Z
Creator Tool                    : FrameMaker 11.0.2
Modify Date                     : 2016:02:25 19:54:16-05:00
Metadata Date                   : 2016:02:25 19:54:16-05:00
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:d8835817-14a9-498e-9ac8-305260f58551
Instance ID                     : uuid:34868765-c879-433e-a0a5-b46f4ef5d7b6
Page Mode                       : UseOutlines
Page Count                      : 12
Author                          : lisutera

EXIF Metadata provided by EXIF.tools