PEGATRON UPWL6017A Wireless Module User Manual UPWL6017 manual

Download:
Mirror Download [FCC.gov]
Document ID	2325383
Application ID	8IGRicaTyU+p5og3S+V5XA==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	32.01kB (400157 bits)
Date Submitted	2014-07-15 00:00:00
Date Available	2015-01-11 00:00:00
Creation Date	2012-08-15 14:23:33
Producing Software	GPL Ghostscript 8.15
Document Lastmod	2014-07-14 14:32:44
Document Title	Microsoft Word - UPWL6017 manual.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Evelyn_Chen

Manual
PEGATRON
UPWL6017

 Federal Communications Commission Statement
This device complies with FCC Rules Part 15. Operation is subject to the following
i. This device may not cause harmful interference, and
ii. This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
i. Reorient or relocate the receiving antenna.
ii. Increase the separation between the equipment and receiver.
iii. Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
iv. Consult the dealer or an experienced radio/TV technician for help.
CAUTION! You are cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
Reprinted from the Code of Federal Regulations #47, part 15.193, 1993. Washington DC: Office of the
Federal Register, National Archives and Records Administration, U.S. Government Printing Office
This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm
may be maintained between the antenna and users. The final end product must be labeled in a visible area with
the following: “Contains transmitter FCC ID: VUIUPWL6017A”.
IMPORTANT NOTE:
This module is intended for OEM integrator.
The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this
module.
Appropriate measurements (e.g. 15 B compliance) and if applicable additional equipment authorizations (e.g.
Verification , Doc) of the host device to be addressed by the integrator/manufacturer.

 Safety statements
Regulatory Information/Disclaimers
Installation must be in strict accordance with the instructions included in the user documentation
provided with the product. Any changes or modifications (including the antennas) made to this device
that are not expressly approved by the manufacturer may void the user’s authority to operate the
equipment. The manufacturer is not responsible for any radio or television interference caused by
unauthorized modification of this device, or the substitution of the connecting cables and equipment
other than manufacturer specified. It is the responsibility of the user to correct any interference
caused by such unauthorized modification, substitution or attachment. Manufacturer and its
authorized resellers or distributors will assume no liability for any damage or violation of government
regulations arising from failing to comply with these guidelines.
CAUTION! To maintain compliance with FCC’s RF exposure guidelines, this equipment should be
installed and operated with minimum distance [20cm] between the radiator and your body. Use on the
supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter
and may violate FCC regulations.
Canada,Industry Canada(IC) Notices
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm
may be maintained between the antenna and users. The final end product must be labeled in a visible area with the
following: “Contains transmitter module IC: 7582A-UPWL6017A”.
Contient le module d'émission IC: 7582A-UPWL6017A
The Country Code Selection feature is disabled for products marketed in the US/Canada

 Safety Information
In order to maintain compliance with the FCC RF exposure guidelines, this equipment should be
installed and operated with minimum distance [20cm] between the radiator and your body. Use only
with supplied antenna.
Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC
regulations.
CAUTION! Any changes or modifications not expressly approved in this manual could void your
authorization to use this device.

 MPE Statement
Your device contains a low power transmitter. When device is transmitted it sends out Radio Frequency
(RF) signal.

 RF Exposure
The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.

 About this guide
This user guide contains the information your PEGATRON WIFI Module.

 System requirements
Before installing the PEGATRON WIFI module, make sure that your system meets the
following requirements:
Intel® Pentium® 4 or AMD K7/K8 system
Minimum 64MB system memory
Windows® XP/VISTA operating system
An available USB port (USB 2.0 recommended because USB 1.1 cannot achieve
maximum wireless performance)

 Installing the device drivers
To install the device driver in your computer:
Insert the support CD to the optical drive and follow the following procedure.
Step1. Click
the “Next”
button.
Step2. Browse
the file path
and click the
“Next” button.
Step3. Click
the “Continue
Anyway”
button.
Step4.
Installing.
Step5. Click
the “Finish”
button.
Step6.
When you
successfully
finish the
installation,
the computer
management
will detect the
device.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Evelyn_Chen
Create Date                     : 2012:08:15 14:23:33Z
Modify Date                     : 2014:07:14 14:32:44+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : Evelyn_Chen
Title                           : Microsoft Word - UPWL6017 manual.doc
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2014:07:14 14:32:44+08:00
Producer                        : GPL Ghostscript 8.15
Document ID                     : uuid:609d383d-0a10-4241-a43d-16dcafd40979
Instance ID                     : uuid:3eb7cc08-8927-444f-b0d6-341b07aea2ad
Page Count                      : 8

EXIF Metadata provided by EXIF.tools