User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1850566 |
| Application ID | nZid7dQbm5KzXbQUbsunTQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 17.88kB (223535 bits) |
| Date Submitted | 2012-12-03 00:00:00 |
| Date Available | 2013-01-17 00:00:00 |
| Creation Date | 2017-10-31 06:57:18 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-10-31 06:57:18 |
| Document Title | Microsoft Word - UPWL60381HP_manual_20121129 doc.doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | SharonJiang |
Manual Un ih a n UPW L6 0 3 8 1 H P 1 .Ge n e r a l D e scr ipt ion The UPWL60381HP wireless m odule is a fully assem bled and t est ed general- purpose m odule using t he AR9381wireless Syst em - on- Chip( SoC) . The m odule cont ains AR9381 chip and all ot her necessary com ponent s t o operat e t he UPWL60381HP. For det ailed inform at ion on t he UPWL60381HP com ponent it self, refer t o t he UPWL60381HP dat asheet . 2 . Fe a t u r e s Features Description Network Standard IEEE 802.11 b/g/n (final n) Chipset Atheros AR9381 Input Voltage 3.3V Data Rate 802.11b: 1, 2, 5.5, 11Mbps 802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps 802.11n-20 MHz: MCS0~MCS23 802.11n-40 MHz: MCS0~MCS23(450Mbps) 802.11b:DBPSK(1Mbps),DQPSK(2Mbps),CCK(5.5Mbps,11Mbps) 802.11g:BPSK(6Mbps,9Mbps),QPSK(12Mbps,18Mbps), 16QAM(24Mbps,36Mbps),64QAM(48Mbps,54Mbps) Modulation 802.11n:BPSK(MCS0,MCS8, MCS16), QPSK(MCS1,MCS2,MCS9,MCS10, MCS17, MCS18), 16QAM(MCS3,MCS4,MCS11,MCS12, MCS19, MCS20), 64QAM(MCS5,MCS6,MCS7,MCS13,MCS14,MCS15, MCS22, MCS23) Operating Frequency 802.11b/g/n (2412 ~ 2462 MHz) Operating Channel 1~11 for North America, Transceiver/Receiver Mode 3T3R Mode 3 . Be n e fit s Sm all, self- cont ained SMT m odule. 3X3 MI MO funct ion support High power solut ion support high speed t ransm it t ance MCS21, Fe de r a l Com m u n ica t ion s Com m ission St a t e m e n t This device com plies wit h FCC Rules Part 15. Operat ion is subj ect t o t he following i. This device m ay not cause harm ful int erference, and ii. This device m ust accept any int erference received, including int erference t hat m ay cause undesired operat ion. This equipm ent has been t est ed and found t o com ply wit h t he lim it s for a class B digit al device, pursuant t o Part 15 of t he Federal Com m unicat ions Com m ission ( FCC) rules. These lim it s are designed t o provide reasonable prot ect ion against harm ful int erference in a resident ial inst allat ion. This equipm ent generat es, uses, and can radiat e radio frequency energy and, if not inst alled and used in accordance wit h t he inst ruct ions, m ay cause harm ful int erference t o radio com m unicat ions. However, t here is no guarant ee t hat int erference will not occur in a part icular inst allat ion. I f t his equipm ent does cause harm ful int erference t o radio or t elevision recept ion, which can be det erm ined by t urning t he equipm ent off and on, t he user is encouraged t o t ry t o correct t he int erference by one or m ore of t he following m easures: i. Reorient or relocat e t he receiving ant enna. ii. I ncrease t he separat ion bet ween t he equipm ent and receiver. iii. Connect t he equipm ent int o an out let on a circuit different from t hat t o which t he receiver is connect ed. iv. Consult t he dealer or an experienced radio/ TV t echnician for help. CAUTI ON ! You are caut ioned t hat changes or m odificat ions not expressly approved by t he part y responsible for com pliance could void your aut horit y t o operat e t he equipm ent . Reprint ed from t he Code of Federal Regulat ions # 47, part 15.193, 1993. Washingt on DC: Office of t he Federal Regist er, Nat ional Archives and Records Adm inist rat ion, U.S. Governm ent Print ing Office. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. IMPORTANT NOTE: This module is intended for OEM integrator. The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for an population/uncontrolled environment can be satisfied. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. USERS MANUAL OF THE END PRODUCT: In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19 statement is required to be available in the users manual: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. LABEL OF THE END PRODUCT: The final end product must be labeled in a visible area with the following " Contains TX FCC ID: VUIUPWL60381HP ". If the size of the end product is larger than 8x10cm, then the following FCC part 15.19 statement has to also be available on the label: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Sa fe t y st a t e m e n t s Re gu la t or y I n for m a t ion / D iscla im e r s I nst allat ion and use of t his m odule device m ust be in st rict accordance wit h t he inst ruct ions included in t he user docum ent at ion provided wit h t he product . Any changes or m odificat ions ( including t he ant ennas) m ade t o t his device t hat are not expressly approved by t he m anufact urer m ay void t he user’s aut horit y t o operat e t he equipm ent . The m anufact urer is not responsible for any radio or t elevision int erference caused by unaut horized m odificat ion of t his device, or t he subst it ut ion of t he connect ing cables and equipm ent ot her t han m anufact urer specified. I t is t he responsibilit y of t he user t o correct any int erference caused by such unaut horized m odificat ion, subst it ut ion or at t achm ent . Manufact urer and it s aut horized resellers or dist ribut ors will assum e no liabilit y for any dam age or violat ion of governm ent regulat ions arising from failing t o com ply wit h t hese guidelines. CAUTI ON ! To m aint ain com pliance wit h FCC’s RF exposure guidelines, t his equipm ent should be inst alled and operat ed wit h m inim um dist ance [ 20cm ] bet ween t he radiat or and your body. Use on t he supplied ant enna. Unaut horized ant enna, m odificat ion, or at t achm ent s could dam age t he t ransm it t er and m ay violat e FCC regulat ions. Sa fe t y I n for m a t ion I n order t o m aint ain com pliance wit h t he FCC RF exposure guidelines, t his equipm ent should be inst alled and operat ed wit h m inim um dist ance [ 2 0 cm ] bet ween t he radiat or and your body. Use only wit h supplied ant enna. Unaut horized ant enna, m odificat ion, or at t achm ent s could dam age t he t ransm it t er and m ay violat e FCC regulat ions. CAUTI ON ! Any changes or m odificat ions not expressly approved in t his m anual could void your aut horizat ion t o use t his device. M PE St a t e m e n t Your device cont ains a low power t ransm it t er. When device is t ransm it t ed it sends out Radio Frequency ( RF) signal. FCC Ra dio Fr e qu e n cy Ex posu r e This m odule device has been evaluat ed under FCC Bullet in OET 65C and found com pliant t o t he requirem ent s as set fort h in CFR 47 Sect ions 2.1091, 2.1093, and 15.247( b) ( 4) addressing RF Exposure from radio frequency devices. The radiat ion out put power of t his m odule device is far below t he FCC radio frequency exposure lim it s. Nevert heless, t his device shall be used in such a m anner t hat t he pot ent ial for hum an cont act during norm al operat ion – as a m obile or port able device but use in a body- worn way is st rict ly prohibit . When using t his device, a cert ain separat ion dist ance bet ween ant enna and nearby persons has t o be kept t o ensure RF exposure com pliance. I n order t o com ply wit h t he RF exposure lim it s est ablished in t he ANSI C95.1 st andards, t he dist ance bet ween t he ant ennas and t he user should not be less t han [ 20cm ] . RF Ex posu r e The ant enna( s) used for t his t ransm it t er m ust not be co- locat ed or operat ing in conj unct ion wit h any ot her ant enna or t ransm it t er. Abou t t h is gu ide This user guide cont ains t he inform at ion your PEGATRON WI FI Module. IC Statement: This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B conforme á la norme NMB-003 du Canada. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. Pour les produits disponibles aux États-Unis / Canada du marché, seul le canal 1 à 11 peuvent être exploités. Sélection d'autres canaux n'est pas possible. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. Cet appareil et son antenne (s) ne doit pas être co-localisés ou fonctionnement en association avec une autre antenne ou transmetteur. IMPORTANT NOTE: IC Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Declaración de exposición a la radiación de Canada: Este equipo cumple con los límites de exposición a la radiación de la IC establecidos para un ambiente no controlado. Este equipo se debe instalar y operar con una distancia mínima de 20 cm entre el radiador y su cuerpo. This module is intended for OEM integrator. The OEM integrator is still responsible for the IC compliance requirement of the end product, which integrates this module. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the IC RSS-102 radiation exposure limits set forth for an population/uncontrolled environment can be satisfied. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro de modèle s'il fait partie du matériel de catégorie I) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. Ant. Group Ant. Brand 1-3 4-6 7-9 Airgain Airgain Airgain 10-12 13-15 16-18 19-21 Model Name N2420S N2420S N2420S WPB243 WANSHIH (UC3WFI0053) WPB243 WANSHIH (UC3WFI0055) WPB243 WANSHIH (UC3WFI0054) WANSHIH WC3WFI0054 PCB U.FL U.FL U.FL Antenna length Remark (cm) 1.3 16.2 TX/RX 1.42 12.3 TX/RX 1.63 5.7 TX/RX PCB MHF 3.10 22.4 TX/RX PCB MHF 5.03 15.8 TX/RX PCB MHF 3.03 TX/RX PCB MHF 5.4 21.3 TX/RX Antenna Type PCB PCB Gain Connector (dBi) USERS MANUAL OF THE END PRODUCT: In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the IC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. IC statement is required to be available in the users manual: This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. LABEL OF THE END PRODUCT: The final end product must be labeled in a visible area with the following " Contains TX IC : 7582A-UPWL60381HP ". Syst e m r e qu ir e m e n t s Before inst alling t he PEGATRON WI FI m odule, m ake sure t hat your syst em m eet s t he following requirem ent s: I nt el® Pent ium ® 4 or AMD K7/ K8 syst em Minim um 64MB syst em m em ory Windows® XP/ VI STA operat ing syst em I n st a llin g t h e de vice dr ive r s To inst all t he device driver in your com put er: I nsert t he support CD t o t he opt ical drive and follow t he following procedure. St ep 1 St ep 2 St ep 3 St ep 4
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : SharonJiang Create Date : 2012:11:30 16:46:43+08:00 Modify Date : 2012:11:30 16:47:19+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2012:11:30 16:47:19+08:00 Producer : Acrobat Distiller 9.0.0 (Windows) Format : application/pdf Title : Microsoft Word - UPWL60381HP_manual_20121129 doc.doc Creator : SharonJiang Document ID : uuid:b8deb6ba-bcb5-405b-afd7-75ffebc82e73 Instance ID : uuid:4638428c-4ae0-474e-ab9a-652aaa6ed8e0 Page Count : 13EXIF Metadata provided by EXIF.tools