PEGATRON WL166N11 Wireless USB Dongle User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	1113611
Application ID	lAIy8THgpByfCjaXha8I9g==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	62.86kB (785768 bits)
Date Submitted	2009-05-20 00:00:00
Date Available	2009-05-20 00:00:00
Creation Date	2009-03-23 14:13:12
Producing Software	Adobe PDF Library 8.0
Document Lastmod	2009-05-20 09:54:41
Document Title	Manual
Document Creator	Adobe InDesign CS3 (5.0.4)

WL-166N11
Wireless USB Dongle
Hardware and Driver Reference
CONTENTS
CONTENTS..................................................................................................................2
INTRODUCTION.......................................................................................................3
SCOPE.............................................................................................. 3
ACRONYMS AND DEFINITIONS...................................................... 3
GENERAL FEATURES...................................................................... 3
DETAILED FEATURES...................................................................... 4
Hardware Information........................................................................ 5
CERTIFICATION................................................................................ 5
DRIVER INSTALLATION STEPS...................................................... 6
DEVICE AND DRIVER DETAILS....................................................... 7
WIRELESS CONNECTION............................................................... 8
Safety Statements.............................................................................................9
NOTE: Information in this document is subject to change after this document is
made available.
WL-166N11 Hardware & Driver Reference
INTRODUCTION
SCOPE
The primary purpose of this documentation is to describe the WL166N11 product specifications, features, and requirements. The
WL-166N11 is an IEEE802.11 b/g/n USB dongle. It allows you to
easily upgrade your PC-Platform or Laptop to 802.11n Draft 3.0. It
provides an access speed of 150Mbps with IEEE802.11n Draft3.0
protocol. It is also officially recommended by Xlink Kai, which is
a software that allows PSP or Nintendo DS users to play online
games all over the world. WL-166N11 can easily setup a wireless
LAN through its integrated WPS button (requires a router with the
same WPS button). In addition, The WL-166N11 also provides
software WPS functionality that allows you to make connections
through its budled utility. Even a first time wireless LAN user can
easily setup the WL-166N11.
ACRONYMS AND DEFINITIONS
Acronym
BPSK 		
QAM 		
QPSK 		
WEP 		
WPA 		
WPS 		
Description
Binary Phase Shift Keying
Quadrature Amplitude Modulation
Quadrature Phase Shift Keying
Wired Equivalent Privacy
WiFi Protected Access
WiFi Protected Setup
GENERAL FEATURES
• USB dongle that supports IEEE 802.11b/g/n draft 3.0
• BPSK, QPSK, 16QAM, 64QAM, DBPSK, DQPSK, CCK modulation schemes
• WEP, TKIP, AES, WPA, WPA2 security support
WL-166N11 Hardware & Driver Reference
Introduction
DETAILED FEATURES
Features
Description
Network Standard IEEE 802.11 b/g/n (Draft-3.0)
Chipset 		
Ralink RT3070 (Baseband/MAC and RF Transceiver)
Input Voltage
5V
Host interface
USB 1.1/2.0 Interface (Type A Connector)
Dimension
L: 44.33mm*W:20mm*H:7.75mm
Data Rate
802.11b: 1, 2, 5.5, 11Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps
802.11n-20 MHz: 7.2, 14.4, 21.7, 28.9, 43.3, 57.8, 65, 72.2Mbps
802.11n-40 MHz: 15, 30, 45, 60, 90, 120, 135, 150 Mbps
Modulation
802.11b:
DBPSK (1Mbps), DQPSK (2Mbps), CCK (5.5Mbps,11Mbps)
802.11g:
BPSK (6Mbps,9Mbps), QPSK (12Mbps,18Mbps),
16QAM (24Mbps,36Mbps), 64QAM (48Mbps,54Mbps)
802.11n:
BPSK (7.2/15Mbps), QPSK (14.4/21.7/30/45Mbps),
16QAM (28.9/43.3/60/90Mbps),
64QAM (57.8/65/72.2/120/135/150Mbps)
Operating Freq.
802.11b/g/n (2412 ~ 2484 MHz)
Operating Chan.
1~11 for N. America & Taiwan, 1~13 for Europe, 1~14 for Japan
Transceiver/
Receiver Mode
1T1R Mode
Antenna Type
Printed antenna with 2.95dBi gain
RF Output Power
18.00dBm for 802.11b
22.00dBm for 802.11g
22.00dBm for draft 802.11n (20MHz)
22.00dBm for draft 802.11n (40MHz)
Security		
WEP 64/128, WPA, & WPA2 coupled with Int. Reg 802.11d+h
Driver OS Support Windows Vista, XP, 2000, Linux, MAC
Weight 		
Approx. 7g
WL-166N11 Hardware & Driver Reference
Introduction
Hardware Information
Item
Form Factor
Host Interface
Antenna Type
PCB 		
Description
USB Dongle
USB 2.0
PIFA Antenna
4 layer
The WL-166N11 is a USB 2.0 Wi-Fi dongle which adopts Ralink
RT3070 single chipset solution integrating MAC/Baseband and
2.4GHz RF. It fully complies with IEEE 802.11n draft 3.0 and IEEE
802.11 b/g feature. Its high standard wireless connectivity delivers
reliable, cost-effective, higher throughput, and extended wireless
cover range. Optimized RF architecture and baseband algorithms
provide superb performance and low power consumption.
Intelligent MAC design deploys a high efficient USB engine and
hardware data processing accelerators without overloading the
host processor. WL-166N11 is designed to support standard based
features in the areas of security, quality of service and international
regulation, giving end users the greatest performance anytime in
any circumstance.
CERTIFICATION
Regulatory
These are pending certifications:
Country
USA 		
EU 		
Taiwan 		
Requirement
RF 		
RF 		
RF 		
WL-166N11 Hardware & Driver Reference
Criteria
FCC Part 15. Subpart C
EN300 328/ EN301 489-1&17
LP002
Introduction
DRIVER INSTALLATION STEPS
Double-click the driver setup file.
Read the agreement. Select “I
accept...” and click Next to continue.
Select “Install driver and Ralink WLAN
Utility”. Click Next to continue.
Click Next to begin installation.
After installation, click Finish to exit.
The Ralink Utility icon will show on the
Windows taskbar. A red X will show
when there is no connection.
Right click the Ralink Utility icon to
bring up a shortcut menu.
Status will show when your cursor is
placed over it.
WL-166N11 Hardware & Driver Reference
Driver Installation
DEVICE AND DRIVER DETAILS
After driver installation, the wireless
module shows as “802.11 USB
Wireless LAN Card” in Windows
Device Manager.
Detailed driver info.
WL-166N11 Hardware & Driver Reference
Detailed device info.
Driver Installation
WIRELESS CONNECTION
Connection to a wireless LAN:
When you launch the Config Utility, click
the Network icon and you will see a list
of detected access points. Double-click
the access point name to connect to it.
(Extra information may be needed by
the access point if security is enabled.)
Click the arrow on the right side of the
window to show or hide details. (The
above details are shown.)
Learning your device address:
Click the violet right arrow to show
more icons. Click the About icon
to display information about your
wireless device.
You can see the “Phy_Address” in
this window. This address is need for
connection to access points that has
accept/reject security access.
WL-166N11 Hardware & Driver Reference
Safety Statements
Federal Communications Commission Statement
This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WL-166N11 Hardware & Driver Reference
Safety Statements
FCC Radio Frequency (RF) Exposure Caution Statement
This equipment complies with FCC RF exposure limits set forth for an uncontrolled environment.
To maintain compliance with FCC RF exposure compliance requirements, please follow operation
instructions in the user’s manual.
FCC CAUTION: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment. “The manufacturer declares that this device is limited to
the channels in the US frequency band by a specified firmware controlled
in the USA.”
Declaration of Conformity for R&TTE directive 1999/5/EC
Protection requirements for health and safety - Article 3.1a
The protection of the health and the safety of the user and any other person, including the objectives with respect to safety requirements contained in Directive 73/23/EEC, but with no voltage limit
applying.
Protection requirements for electromagnetic compatibility (EMC) - Article 3.1b
The protection requirements with respect to electromagnetic compatibility contained in Directive
89/336/EEC.
Effective use of the radio spectrum - Article 3.2
Radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communication and orbital resources so as to avoid harmful interference.
CE Mark Warning
This is a Class B product, in a domestic environment, this product may cause radio interference, in
which case the user may be required to take adequate measures.
Hereby that Pegatron Corporation, declares that this device is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
CE MARK NOTICE: This equipment should be installed and operated with a
minimum distance of 20cm between the radiator and your body.
10
WL-166N11 Hardware & Driver Reference

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
Tagged PDF                      : Yes
Page Mode                       : UseOutlines
XMP Toolkit                     : 3.1-701
Instance ID                     : uuid:5ece89f2-c747-4710-b2ba-d1cb3c2603c0
Document ID                     : adobe:docid:indd:b0cd1d50-4de7-11dd-8739-cfadcb9ddf46
Rendition Class                 : proof:pdf
Derived From Instance ID        : b0cd1d4a-4de7-11dd-8739-cfadcb9ddf46
Derived From Document ID        : adobe:docid:indd:87ee85c6-ca3b-11db-a890-fe58c26245a7
Manifest Link Form              : ReferenceStream
Manifest Placed X Resolution    : 72.00
Manifest Placed Y Resolution    : 72.00
Manifest Placed Resolution Unit : Inches
Manifest Reference Instance ID  : uuid:108BDEA969FEDD118539E5FFF22AC88D
Manifest Reference Document ID  : uuid:0F8BDEA969FEDD118539E5FFF22AC88D
Create Date                     : 2009:03:23 14:13:12+08:00
Modify Date                     : 2009:05:20 09:54:41+08:00
Metadata Date                   : 2009:05:20 09:54:41+08:00
Creator Tool                    : Adobe InDesign CS3 (5.0.4)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 5105 bytes, use -b option to extract)
Format                          : application/pdf
Producer                        : Adobe PDF Library 8.0
Trapped                         : False
Page Count                      : 10
Page Layout                     : TwoPageRight
Creator                         : Adobe InDesign CS3 (5.0.4)

EXIF Metadata provided by EXIF.tools