PEGATRON WL266N22BGN WL-266N22-Duband User Manual

PEGATRON CORPORATION WL-266N22-Duband Users Manual

Users Manual

1 WL-266N22_DUBAND 11bgn Wireless Dongle Hardware and Driver Reference
2 CONTENTS INTRODUCTION.................................................................................................................................. 3 SCOPE ......................................................................................................................................... 3 ACRONYMS AND DEFINITIONS................................................................................................. 3 GENERAL FEATURES................................................................................................................. 3 HARDWARE INFORMATION ....................................................................................................... 4 DRIVER INSTALLATION STEPS ................................................................................................. 5 DEVICE AND DRIVER DETAILS.................................................................................................. 7 SAFETY STATAMENTS ...................................................................................................................... 8 FCC Radio Frequency (R F) Exposure Caution Statement...................................................... 8
3 INTRODUCTION SCOPE The primary purpose of this documentation is to describe the WL-266N22_DUBAND product specifications, features, and requirements. The WL-266N22_DUBAND is an IEEE802.11 b/g/n USB dongle. It allows you to easily upgrade your PC-Platform or Laptop to 802.11n (final n). It provides an access speed of 150Mbps with IEEE802.11n (final n)protocol. It is also officially recommended by Xlink Kai, which is a software that allows PSP or Nintendo DS users to play online games all over the world. Optimized RF architecture and baseband algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient USB engine and hardware data processing accelerators without overloading the host processor. WL-266N22_DUBAND is designed to support standard based features in the areas of security, quality of service and international regulation, giving end users the greatest performance anytime in any circumstance. ACRONYMS AND DEFINITIONS Acronym Description BPSK Binary Phase Shift Keying QAM Quadrature Amplitude Modulation QPSK Quadrature Phase Shift Keying WEP Wired Equivalent Privacy WPA WiFi Protected Access GENERAL FEATURES USB dongle that supports IEEE 802.11b/g/n (final n). BPSK, QPSK, 16QAM, 64QAM, DBPSK, DQPSK, CCK modulation schemes WEP, TKIP, AES, WPA, WPA2 security support•
4 HARDWARE INFORMATION Item Description Form Factor USB Dongle Host Interface USB 2.0 Antenna Type PCB Antenna PCB 4 layer The WL-266N22_DUBAND is a USB 2.0 Wi-Fi dongle which adopts Ralink RT3572 single chipset solution integrating MAC/Baseband and 2.4GHz RF. It fully complies with IEEE 802.11n (final n) and IEEE 802.11 b/g feature. Its high standard wireless connectivity delivers reliable, cost-effective, higher throughput, and extended wireless cover range. Optimized RF architecture and baseband algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient USB engine and hardware data processing accelerators without overloading the host processor. WL-266N22_DUBAND is designed to support standard based features in the areas of security, quality of service and international regulation, giving end users the greatest performance anytime in any circumstance.
5 DRIVER INSTALLATION STEPS
6
7 DEVICE AND DRIVER DETAILS
8 SAFETY STATEMENTS FCC Radio Frequency (R F) Exposure Caution Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. --------------------------------------------------------------------------------------------------------------------------------------FCC CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. “The manufacturer declares that this device is limited to the channels in the US frequency band by a specified firmware controlled in the USA. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instructions in the user’s manual. -------------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------------------------------------------------FCC Label Compliance Statement: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. -------------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------------------------------------------------Module User Requirements: When the module be installed into new host and a separation distance of more than 20cm from the human body. However if the module is placed into the host that is RF category portable, the FCC RF exposure requirements of the portable host must be properly\addressed .The label shall include following message: Contains FCC ID: VUI-WL266N22BGN --------------------------------------------------------------------------------------------------------------------------------------

Navigation menu