PFREUNDT WK60XS WK60-XS User Manual UserManual

PFREUNDT GmbH WK60-XS UserManual

UserManual

1PFREUNDT GmbH | Brief operating instructions - Wheel loader scale WK60 / WK60-S / WK60-XS | WK60-RAD-KBA-B-(2007.04)-EN(US) Allocaon of this ManualProduct:• These brief instructions will describe the first steps to take when operating the WK60 wheel loader scale. Please refer to the Instruction Manual on the included CD for a comprehensive description of all the functions.• The Manual is part of the product. Please store it for easy access.Danger symbols used in this ManualDanger point / hazardous situaon2.1 Designated use2.3 Risks posed by incorrect use2.4 Training and qualicaon of users1. Use of this ManualTap – short tap with a nger:• to open applications• to operate controls (e.g. confirm entry)• for entries via the on-screen keyboardSwiping or stroking (scrolling)• to scroll through a long list• to call up the previous / next pagePressing and holding the desired buon• to call up available options (e.g. to show context menus)2. Safety notesAutomac wheel loader scale WK60 / WK60-S / WK60-XSLanguage: English (US)First edion: WK60-RAD-KBA-A-(2016.10)-EN(US)Associated appli-cable document.: WK60-RAD-BA-*-(20**.**)-EN(US)Instrucon manual as updated.© CopyrightWe reserve all copyrights to this documentaon. Improper use, especially copying and disclosure to third pares is not permied.3. Operang condions suitable for correct weighingthe scale is responsible for regular calibraon in accordance with naonal regulaons.Ocial calibraon checks are required aer changesOcial calibraon checks are required immediately aer changes to the liing arms, liing cylinders, switching points of proximity switches or the load carrier.Scales with loading buckets are not suited for very scky goods ......which may shi the zero point by more than 0.5 e (calib-raon value) between weighing buckets.Using the scale to weigh aggregate for building material preparaon: (e. g. concrete mixing)Observe the applicable regulaons on the accuracy of weig-hing individual components. The lower limit of the minimum load is 10 e (e = calibraon value / = the least signicant digit of the scale).Only carry out weighing during smooth travelCarry out weighing whilst travelling smoothly, if possible, or in horizontal staonary posion. A warning will be displayed and weighing will be blocked if the vehicle is not level enough.Weighing should only be carried out within the permied temperature range:• Do not operate a scale outside its permissible tempe-rature range, see the “Technical data” chapter in the Instruction Manual.• When using external components (printer, etc.), obser-ve the temperatures given in their specific data sheets.This scale is designed exclusively for weighing of bulk goods using:• Wheel l oad ers an d similar u tilit y ve hicl es (e. g. Forkli f t tru ck s or telehandlers with a lifting fork or loading bucket).• The bulk goods should not have a tendency to stick.• Any adhering material must be removed from the loading bucket after use.• Damages resulting from the use of weighing tickets other than the original PFREUNDT tickets intended for the specific printer shall be excluded from our warranty. Any use other than as designated shall be deemed incorrect.The WK60 wheel loader scale may only be used by trained persons.• The company operating the scale must instruct the operating staff on safe handling of the scale.Translaon of the original German manualStructural changes to the scale and its components may result in a threat to life or damage to equipment. • Structural changes to the scale and its components are prohibited.• Conversion of and repairs to the scale may only be carried out by persons trained and authorized by the manufacturer.• Only original spare parts and accessories approved by the manufacturer may be used.Incorrect use of the scale may lead to life-threatening situaons. The scale has not been approved for operaon in:• potentially explosive environments• aggressive environments (e. g. in rooms with acid /etching or galvanizing baths)• in environments prone to stray currents or heat (e. g. due to welding)Overloading transport vehicles is life-threatening.• Obtain information on the permissible loading of such vehicles and strictly comply with such limits.• Avoid incorrect weighing, e.g. by ensuring correct positioning of wheel loaders during weighing.4. Using the touch-screenCarry out regular calibraonsScales of this type subject to mandatory calibraon may only be used compliant with naonal statutory regulaons of the country where they are used. The company operang 2.2 FCC and IC Cerkaon (only for WK60-XS)NOTICEThis device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s).Operaon is subject to the following two condions:• this device may not cause harmful interference, and • this device must accept any interference received, inclu-ding interference that may cause undesired operation.Le présent appareil est conforme aux CNR d‘Industrie Canada applicables aux appareils radio exempts de licence. L‘exploitaon est autorisée aux deux condions suivantes:• (1) l‘appareil ne doit pas produire de brouillage, et • (2) l‘utilisateur de l‘appareil doit accepter tout brouil-lage radioélectrique subi, même si le brouillage est susceptible d‘en compromettre le fonctionnement.NOTICEChanges or modicaons made to this equipment not expressly approved by Pfreundt GmbH may void the FCC authorizaon to operate this equipment.Contains transmier module FCC ID: PV7-WIBEAR11N-SF2IC: 7738A-WB11NSF2NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal instal-laon. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radio or te-levision recepon, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit dif-ferent from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV techni-cian for help.Radiofrequency radiaon exposure InformaonThis equipment complies with FCC radiaon exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 7,87”/20 cm between the radiator and your body. This trans-mier must not be co-located or operang in conjuncon with any other antenna or transmier. This device IC: 21743-WK60XS has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.Cet équipement est conforme aux limites d‘exposion aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et ulisé avec un minimum de 7,87”/20 cm de distance entre la source de rayonnement et votre corps. Ce transmeeur ne doit pas etre place au meme endroit ou ulise simultanement avec un autre transmeeur ou antenne. Cet émeeur appareil IC: 21743-WK60XS été approuvé par Industry Canada pour fonconner avec les types d’antenne énumérés ci-dessous avec le gain maximum autorisé et l’impédance nécessaire pour chaque type d’antenne indiqué. Les types d’antenne ne gurant pas dans cee liste et ayant un gain supérieur au gain maximum indiqué pour ce type-là sont strictement interdits d’ulisaon avec cet appareil.Antenna GainDelock 88395 2dBiDelock 88985 0.7 dBiPlease use only original PFREUNDT weighing ckets• For optimal printing quality and maximum printer service life, please use only suitable Original PFREUNDT weighing tickets. You are welcome to phone us for advice.
PFREUNDT GmbH | Robert-Bosch-Str. 5 | 46354 Südlohn www.pfreundt.de | info@pfreundt.deSales +49(0)2862/9807-100 | Service +49(0)2862/9807-200 | Calibration service +49(0)2862/9807-400 | Weighing tickets +49(0)2862/9807-600 | Head office +49(0)2862/9807-02PFREUNDT GmbH | Brief operating instructions - Wheel loader scale WK60 / WK60-S / WK60-XS | WK60-RAD-KBA-B-(2007.04)-EN(US) 7.1 Calling up zeroing in the menu1. 2. The „WHEEL LOADER SCALE - Informaon” page will open.3. + Open the menu and acvate the funcon „Reset to zero”.4. The scale zeroing prompt will then appear. The current total will not be deleted.1. Hold down the ON/OFF key for about 2 seconds.2. The Starng screen will then appear.3. The following acons will be required aer switching on, depending on scale conguraon:• Logging on a user *• Performing warm-up strokes *• Zeroing the scale* see the Instrucon ManualDepending on conguraon, scale zeroing will be required in the following situaons:• After switching on• When completing the loading procedureManually calling up zeroingYou may at any me call up zeroing in the weighing program menu.2. Zeroing a dynamic scale:1. Lower the liing arms and lt the empty loading bucket fully upward.7.2 Zeroing the scaleWeighing posion7. Zeroing the scale8. Carry out weighing1. Lower the liing arms and ll the bucket.2. Tilt the loaded bucket fully upward.Weighing posionDescripon of the display:a) Measured weightb) Total c) Number of weighingsa) b) c) 5. Empty the loading bucket when you are prompted in the display.6. Connue loading unl the transport vehicle is full or the specied target weight has been reached.7. Finish the loading procedure - see next chapter.8.1 Finish loading1. Push the weighing slip into the printer * as soon as the vehicle has been loaded.* if a printer is connected.2. If the master data are deac-vated, the weighing data will be automacally printed and loading will be complete.The page “LOADING - Master data” will automacally open with the most recently selec-ted master data if the master data are acvated.Weighing with a dynamic scale3. Move the liing arms through the weighing posi-on from the boom up.2.a Move the liing arms through the weighing posion from the boom up.2.b Zeroing will be automac. If the bucket’s tare weight is outside the zeroing range of, a warning will be displayed.Proceed as follows in this case:• Check the bucket and remove any load residues.• Repeat zeroing.Terminate loading without printer and master data1. Aer the last weighing, tap on the „Loading” mode.2. The „LOADING - Master data” page will open.3. Tap on „Finish loading”.4. The weighing data will be automacally saved.5. The main page of the scale will then be shown again.WK60 / WK60-S WK60-XS4. The measured weight is then prominently displayed and added to the total. 3. The first main page of the weighing program will then show.6. Switching on the scalea) c) d) b) Page 1 (example)The rst main page appears when the scale is switched on.Structure of the main pagesa) Metrological informaon eldb) Field of applicaonc) Page displayd) Menu bar5. Soware operaon and navigaonThe main pagesThe General Menu barThe General Menu bar has four basic funcons which are always shown in the same posion in the rst row.Le / Rightconnue to previous / next pageBack • to Main page (of an App’s first page)• one step back (within an App)Menu Open/Close menuValid from program version: Version 1.1.60Document no.: WK60-RAD-KBA-B-(2007.04)-EN(US)Wheel loader scale WK60 / WK60-S / WK60-XSBrief operang instrucons

Navigation menu