POWER ONE ITALY VSN300S WiFi radio module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3813655
Application ID	c3MpVcibsyrVzbbJiNn7Lg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	5.79kB (72390 bits)
Date Submitted	2018-04-12 00:00:00
Date Available	2018-04-18 00:00:00
Creation Date	2018-04-09 22:46:10
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2018-04-09 22:46:10
Document Title	Microsoft Word - VSN300s Instruction Manual _ Release 0.5 - April 2018.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	ITGIIAN

VSN300s – General Connectivity Module
MODEL: VSN300s
FCC ID: X6W-VSN300S
VSN 300s – General Connectivity Module is a
factory optionally assembled communication
board proper to be used for instance on PVS
inverter series but not limited to this product
family.
This communication board provides the following features:
- Wireless bidirectional communication 802.11
b/g/n compliant;
- Dual mode, access point + station;
- Data logging capabilities;
- 4GByte Flash disk storage;
- Integrated web server
- Dual LAN ports for Ethernet connectivity
- USB ports for expanded connectivity
- ADC/PWM/LCD support
It is a pluggable board directly connected to
PVS logic board through a dedicated connector.
Its installation on inverter is typically done by
the factory, but when installed as a spare part
in a repairing process, the installation has to
be executed by trained personnel only.
The board is powered by the inverter.
Proper connector for antenna is available on
board.
The board uses a Murata LBEP5CLXRC-701,
an 802.11b/g/n WLAN module built around
the Texas Instruments WL1801 chipset.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
The manufacturer is not responsible for any
radio or TV interference caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to
operate the equipment.
This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment
off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
(continue on the next page)
Release 0.5 – April 2018
© Copyright 2018 ABB. Tutti i diritti riservati.
Specifiche soggette a modifica senza preavviso.
Le immagini di prodotto sono solo a scopo dimostrativo.
© Copyright 2018 ABB. All rights reserved.
Specifications are subject to change without notice.
The product images are for demonstration purposes only.
VSN300s – General Connectivity Module
(continue from the previous page)
Techical data are in following table.
Any changes or modifications not expressly
approved by the party responsible for compliance could void the user’s authority to operate
the equipment.
Installer should take care that Regulatory Label applied on the Host Equipment includes
the following: Contains FCC ID: X6WVSN300S.
- Reorient or relocate the receiving antenna.
- Increase the separation between the
equipment and receiver.
- Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced
radio/TV technician for help.
This device shall be used such that a minimum separation distance of 20cm/7,87” is
maintained between the radiator (antenna)
and user's/nearby people's body.
Page 2 of 3
Release 0.5 – April 2018
© Copyright 2018 ABB. Tutti i diritti riservati.
Specifiche soggette a modifica senza preavviso.
Le immagini di prodotto sono solo a scopo dimostrativo.
© Copyright 2018 ABB. All rights reserved.
Specifications are subject to change without notice.
The product images are for demonstration purposes only.
VSN300s – General Connectivity Module
Item
Product name
Connections
Connection to PVS Logic board
Value
VSN300s
Note
General Connectivity Module
314-pin edge-finger on PCB
Connection on PVS Logic board
Input / Output
RF
COMM
USB
ETHERNET
ADC
LCD support
Other
Supply
Power supply
Power + Inverter Hyperlink + Interfaces
Standard MXM 3.0 connector
802.11 b/g/n
3 x UART, 2 x CAN
4 x USB 2.0 + USB OTG
2 x LAN ports 100Mbit/s
8 x 12-bit channels
1 x 24-bit TTL for passive LCD
1 x SPI, 1 x I2C, 1 x I2S, 1 x PWM
UFL connector
From the inverter logic board,
12VDC, 24VDC typ.
Phisical
Environmental Protection Class
Bare pcb to be assembled into PVS
inverters
90mmx40mmx5mm (SMD top and
bottom)
Inverter shall be completely powered
off for at least 5 minutes to let any
voltage reduced to a safe level; plug
in the board; secure the board to the
provided stand offs by screws.
2.4 GHz with Swivel RP-SMA, 105
mm long by 10.0 mm diameter (bottom side), 3.32 dBi (peak) gain @
2500 MHz.
Dimensions mm (HxDxW)
Installation
Antenna
RF Antenna Technology Corp.,
Type EA-79F (Item Number
ZFA.00008)
Certifications
Marking
Safety and EMC Standard
Installation and operation shall be
executed by trained personnel only.
Please read this instructions before
operate installation or dismantling.
Antenna is assembled on the Host
Equipment, and secured to the U.FL
Coaxial Connector (J2) soldered on
the VSN300s.
FCC ID X6W-VSN300S
FCC part 15
12VDC, 24VDC typ.
USB 2.0
Inverter Hyperlink
VSN300s
LCD
ADC
ETHERNET
ENABLE
PWM4
VOUT
RF Out
Page 3 of 3
Release 0.5 – April 2018
© Copyright 2018 ABB. Tutti i diritti riservati.
Specifiche soggette a modifica senza preavviso.
Le immagini di prodotto sono solo a scopo dimostrativo.
© Copyright 2018 ABB. All rights reserved.
Specifications are subject to change without notice.
The product images are for demonstration purposes only.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : ITGIIAN
Create Date                     : 2018:04:09 22:46:10+02:00
Modify Date                     : 2018:04:09 22:46:10+02:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : Microsoft Word - VSN300s Instruction Manual _ Release 0.5 - April 2018.doc
Creator                         : ITGIIAN
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:0024484d-3892-4642-91ca-94c87ded1863
Instance ID                     : uuid:3dbb990c-7da9-46c8-bd33-9c8a49db55af
Page Count                      : 3

EXIF Metadata provided by EXIF.tools