PURE TOY S25 Aerial Acrobat Video Drone User Manual
PURE TOY LIMITED Aerial Acrobat Video Drone
PURE TOY >
User Manual
AERIAL ACROBAT VIDEO DRONE
User’s Guide
Thank you for purchasing the Sharper Image Aerial Acrobat Video Drone.
Please read these instructions prior to using this device for the first time.
- 1 -
FEATURES
BATTERY INSTALLATION (TRANSMITTER)
• LED lights
• Glows in the dark
• Auto hover
• Headless mode (for beginners)
• 360° flips
• One-button launch
• One button return
• 3 speed modes
• Includes 4GB memory card (supports up
to 32GB)
• Charge time: 90-120 minutes
• Flight time: 7 minutes
• Flight range: 98 ft.
• Open the battery cover and insert
4 AA batteries (included).
• Follow polarity diagrams inside the
battery compartment.
• Replace the battery cover.
IDENTIFICATION OF PARTS (TRANSMITTER)
- 2 -
PAIRING THE TRANSMITTER AND DRONE HOW TO CONTROL THE AIRCRAFT
• Be sure Transmitter has
fresh batteries and the
drone is fully charged.
• Turn on the Transmitter.
• Power on the Drone by
plugging the battery cable
into the power outlet.
• Place the drone on flat
ground, push throttle lever all
the way up, and pull it all
the way down.
• You will hear a beep when
the Transmitter and Drone
are paired successfully.
TRIM CONTROLS
RESETTING THE GYROSCOPE
• If the vehicle is flying erratically,
you may need to reset the
gyroscope.
• Hold both control levers down
and pointed to the inside for 3
seconds.
• The vehicle lights will turn solid
when the operation is complete.
PROPER FLYING CONDITIONS
• This vehicle can fly indoors
or outdoors
• Make sure ate there no obstacles
nearby (furniture, trees, power
lines, etc.)
• When flying outdoors, fly in
warm, sunny, calm conditions.
• Do not fly in rain, snow, hail
or heavy wind.
- 3 -
STUNT FLIPS: 360° TUMBLING ACTION
AERIAL VIDEO AND PHOTOS
• Fly the vehicle to a height of at least 3 meters (9 feet).
• Press the 3D Eversion button (upper right corner of
transmitter, shown). And then, Push the right lever in any
direction to do a forward tumble, backward tumble, left
tumble or right tumble.
• If the vehicle crashes while attempting a stunt flip, please
reset the gyroscope.
• Insert SD card into the slot until it clicks into place.
• While drone is powered on, press Video to record video. Press again to stop recording.
• While drone is powered on, press Photo to take a single image. (Picture cannot be taken during
video recording function.) .
INDICATOR LIGHTS
Continuous flashing red: Recording video
Red light stops flashing: Stops recording video
Red flashes once: Taking digital photo
• To view videos and photos, power off the drone, remove the SD card and insert it into the
included USB card reader. Then, insert the card reader into your computer USB port.
CHARGING THE DRONE
• The charging time is approximately
90-120 minutes.
• Switch the drone power off, then open
the battery cover and remove battery.
• Connect the USB cable (Port B) to the
computer USB port, you will see a red
light turn on.
• Connect the battery to USB cable
(Port A), you will see a red light turn off
.
• Allow the battery to charge until the red
light turns on again.
• When the red light comes on, the drone
is fully charged.
- 4 -
HEADLESS MODE (EASY MODE)
NOTES
Headless mode makes this drone easier for beginners to fly, because there is no specified “front
end” or “rear end.” In Headless Mode, when you bank left, the drone banks left. When you bank
right, the drone banks right, regardless of what direction the quad is facing.
To turn on Headless Mode
1. Switch to Headless Mode (button is on upper left side of transmitter).
2. You will hear a short “beep” and the indicator light will begin flashing. Now, the drone is in
Headless Mode.
3. To turn off Headless Mode, press the Headless Mode button again. You will hear a short “beep”
and the indicator light will stop flashing and remain continuously on.
4. Correcting forward direction: If the drone crashes while in Headless Mode, the direction of the
aircraft’s indicator light will be the “forward” direction of the aircraft.
Press “one key return” and the aircraft will return to the operator. Press it again
to exit this feature and resume normal flight.
SPEED MODE: Press to select Low, Medium, and High.
AUTO HOVER MODE: When you reach your desired altitude, release the throttle lever to maintain
the altitude in auto hover mode.
ONE KEY LAUNCH: Press to begin with an automatic liftoff.
ONE KEY LANDING: Press to begin a slow descent and landing.
• Disconnect the cable when battery is fully charged.
• Do not leave a charging battery unsupervised.
• Use only the charging cable that came in this package.
• Wait until battery is cool before re-charging (about 30 minutes after flight).
• Do not throw this battery into a fire, as it may explode.
• Do not short circuit this battery or expose it to some small metal parts, as this
may cause accidents.
NOTE: As with all remote control toys, it may take some practice to become proficient in the use of
this drone. Please be patient and observe all local laws concerning drone flights. Do not operate this
vehicle in crowded areas. Do not operate this vehicle near streets, buildings, trees, power lines or
airports.
ONE KEY RETURN:
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/ TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposurere quirement.
The device can be used in portable exposure condition without RF striction.
WARRANTY/CUSTOMER SERVICE
Sharper Image branded items purchased from SharperImage.com include a 60-day limited
replacement warranty. For Customer Service, please call 1(877) 210-3449.