PURE TOY S25 Aerial Acrobat Video Drone User Manual
PURE TOY LIMITED Aerial Acrobat Video Drone
PURE TOY >
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3660039 |
| Application ID | K+ab5apVWvbaxmNztsva4w== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 214.47kB (2680925 bits) |
| Date Submitted | 2017-12-01 00:00:00 |
| Date Available | 2017-12-01 00:00:00 |
| Creation Date | 2017-08-09 13:16:27 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2017-11-22 14:14:42 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CC 2017 (Macintosh) |
AERIAL ACROBAT VIDEO DRONE User’s Guide Thank you for purchasing the Sharper Image Aerial Acrobat Video Drone. Please read these instructions prior to using this device for the first time. FEATURES • • • • • • • LED lights Glows in the dark Auto hover Headless mode (for beginners) 360° flips One-button launch One button return • 3 speed modes • Includes 4GB memory card (supports up to 32GB) • Charge time: 90-120 minutes • Flight time: 7 minutes • Flight range: 98 ft. BATTERY INSTALLATION (TRANSMITTER) • • • Open the battery cover and insert 4 AA batteries (included). Follow polarity diagrams inside the battery compartment. Replace the battery cover. IDENTIFICATION OF PARTS (TRANSMITTER) -1- HOW TO CONTROL THE AIRCRAFT PAIRING THE TRANSMITTER AND DRONE • • • • • Be sure Transmitter has fresh batteries and the drone is fully charged. Turn on the Transmitter. Power on the Drone by plugging the battery cable into the power outlet. Place the drone on flat ground, push throttle lever all the way up, and pull it all the way down. You will hear a beep when the Transmitter and Drone are paired successfully. RESETTING THE GYROSCOPE • • • TRIM CONTROLS If the vehicle is flying erratically, you may need to reset the gyroscope. Hold both control levers down and pointed to the inside for 3 seconds. The vehicle lights will turn solid when the operation is complete. PROPER FLYING CONDITIONS • • • • This vehicle can fly indoors or outdoors Make sure ate there no obstacles nearby (furniture, trees, power lines, etc.) When flying outdoors, fly in warm, sunny, calm conditions. Do not fly in rain, snow, hail or heavy wind. -2- STUNT FLIPS: 360° TUMBLING ACTION • • • Fly the vehicle to a height of at least 3 meters (9 feet). Press the 3D Eversion button (upper right corner of transmitter, shown). And then, Push the right lever in any direction to do a forward tumble, backward tumble, left tumble or right tumble. If the vehicle crashes while attempting a stunt flip, please reset the gyroscope. AERIAL VIDEO AND PHOTOS • • • Insert SD card into the slot until it clicks into place. While drone is powered on, press Video to record video. Press again to stop recording. While drone is powered on, press Photo to take a single image. (Picture cannot be taken during video recording function.) . INDICATOR LIGHTS Continuous flashing red: Recording video Red light stops flashing: Stops recording video Red flashes once: Taking digital photo • To view videos and photos, power off the drone, remove the SD card and insert it into the included USB card reader. Then, insert the card reader into your computer USB port. CHARGING THE DRONE • • • • • • The charging time is approximately 90-120 minutes. Switch the drone power off, then open the battery cover and remove battery. Connect the USB cable (Port B) to the computer USB port, you will see a red light turn on. Connect the battery to USB cable (Port A), you will see a red light turn off Allow the battery to charge until the red light turns on again. When the red light comes on, the drone is fully charged. -3- NOTES • • • • • • Disconnect the cable when battery is fully charged. Do not leave a charging battery unsupervised. Use only the charging cable that came in this package. Wait until battery is cool before re-charging (about 30 minutes after flight). Do not throw this battery into a fire, as it may explode. Do not short circuit this battery or expose it to some small metal parts, as this may cause accidents. HEADLESS MODE (EASY MODE) Headless mode makes this drone easier for beginners to fly, because there is no specified “front end” or “rear end.” In Headless Mode, when you bank left, the drone banks left. When you bank right, the drone banks right, regardless of what direction the quad is facing. To turn on Headless Mode 1. Switch to Headless Mode (button is on upper left side of transmitter). 2. You will hear a short “beep” and the indicator light will begin flashing. Now, the drone is in Headless Mode. 3. To turn off Headless Mode, press the Headless Mode button again. You will hear a short “beep” and the indicator light will stop flashing and remain continuously on. 4. Correcting forward direction: If the drone crashes while in Headless Mode, the direction of the aircraft’s indicator light will be the “forward” direction of the aircraft. ONE KEY RETURN: Press “one key return” and the aircraft will return to the operator. Press it again to exit this feature and resume normal flight. SPEED MODE: Press to select Low, Medium, and High. AUTO HOVER MODE: When you reach your desired altitude, release the throttle lever to maintain the altitude in auto hover mode. ONE KEY LAUNCH: Press to begin with an automatic liftoff. ONE KEY LANDING: Press to begin a slow descent and landing. NOTE: As with all remote control toys, it may take some practice to become proficient in the use of this drone. Please be patient and observe all local laws concerning drone flights. Do not operate this vehicle in crowded areas. Do not operate this vehicle near streets, buildings, trees, power lines or airports. -4- FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/ TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposurere quirement. The device can be used in portable exposure condition without RF striction. WARRANTY/CUSTOMER SERVICE Sharper Image branded items purchased from SharperImage.com include a 60-day limited replacement warranty. For Customer Service, please call 1(877) 210-3449.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2017:08:09 13:16:27-04:00 Creator : Adobe InDesign CC 2017 (Macintosh) Modify Date : 2017:11:22 14:14:42+08:00 Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2017:11:22 14:14:42+08:00 Creator Tool : Adobe InDesign CC 2017 (Macintosh) Thumbnail Width : 180 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 16636 bytes, use -b option to extract) Instance ID : uuid:129a1dbc-71bf-443a-b5aa-3dfa93ab1bde Original Document ID : xmp.did:e0828687-b35e-4211-94ad-c7c3f53a9d45 Document ID : xmp.id:cf565eac-ddd9-4005-b24b-c8587c7f51c1 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:388ffb03-3baa-4409-b177-cb6db5953ab3 Derived From Document ID : xmp.did:ff45bfeb-551e-496a-bbbd-cf00ce864186 Derived From Original Document ID: xmp.did:e0828687-b35e-4211-94ad-c7c3f53a9d45 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2017 (Macintosh) History Changed : / History When : 2017:08:09 13:16:27-04:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False N Pages : 1 Has Visible Transparency : False Has Visible Overprint : True Max Page Size W : 215.900000 Max Page Size H : 279.400000 Max Page Size Unit : Millimeters Font Name : Geogrotesque-Regular, Geogrotesque-Medium Font Family : Geogrotesque, Geogrotesque Font Face : Regular, Medium Font Type : Open Type, Open Type Font Version : Version 2.001, Version 2.001 Font Composite : False, False Font File Name : Geogtq-Rg.otf, Geogtq-Md.otf Plate Names : Black Swatch Group Name : 默认色板组 Swatch Group Type : 0 Page Count : 5 For : Administrator, Title : 2017-8-10-205982-AerialAcrobatVideoDrone_Manual.pdf Bounding Box : 0 0 612 792 Container Version : 11 Creator Version : 16 Image Height : 792 Image Width : 612 Image Size : 612x792 Megapixels : 0.485EXIF Metadata provided by EXIF.tools