Palfinger RCP915RF001 Radio Module User Manual RCP 915 RF Installation Instructions10

Palfinger AG Radio Module RCP 915 RF Installation Instructions10

Installation Instructions.pdf

RCP 915 RF Installation Instructions General RCP 915 RF Installation Instructions.docx Template V1.0, HAH 13.03.2014 Seite 1 von 17 Installation instructions RCP 915 RF RCP 915 RF Installation Instructions.docx Distribution list: Name Function Date Signature Hermann Haslauer Creator 12.03.2014 Bernhard Wieder Project leader 12.03.2014 Validation Quality management
RCP 915 RF Installation Instructions General RCP 915 RF Installation Instructions.docx Template V1.0, HAH 13.03.2014 Seite 2 von 17 Contents 1GENERAL ...................................................................................................................... 31.1Modification history ......................................................................................................... 31.2Standards und policies .................................................................................................... 31.3Referenced documents ................................................................................................... 31.4Acronyms und abbreviations ........................................................................................... 31.5Terms ............................................................................................................................. 32INTRODUCTION ............................................................................................................ 43RCP 915 RF TRANSCEIVER MODULE ........................................................................ 54HOST SYSTEMS ............................................................................................................ 64.1RCP 915 mobile unit ...................................................................................................... 64.2RCP 915 mobile unit antenna ........................................................................................ 64.3RCP 915 base station .................................................................................................... 74.4RCP 915 base station antenna ...................................................................................... 75HOST SYSTEM BOARDS .............................................................................................. 85.1Host board mobile unit linear lever-big ............................................................................ 85.2Host board mobile unit joystick-big .................................................................................. 95.3Host board mobile unit linear lever-small ...................................................................... 105.4Host board mobile unit joystick-small ............................................................................ 115.5Host board base station ................................................................................................ 126MODULE INSTALLATION ........................................................................................... 136.1Module on mobile units ................................................................................................. 136.2Antenna connection on mobile units ............................................................................. 146.3Module on base station ................................................................................................. 156.4Antenna connection on base station ............................................................................. 167LEGAL ISSUES FOR FCC (US) AND IC (CANADA) ................................................... 17
RCP 915 RF Installation Instructions General RCP 915 RF Installation Instructions.docx Template V1.0, HAH 13.03.2014 Seite 3 von 17 1 General 1.1 Modification history Version Release date Creator changed sections 1.0 12.03.2014 Hermann Haslauer creation 1.2 Standards und policies Reference Title Version 1.3 Referenced documents Reference Title Version 1.4 Acronyms und abbreviations Meaning 1.5 Terms Meaning
RCP 915 RF Installation Instructions Introduction RCP 915 RF Installation Instructions.docx Template V1.0, HAH 13.03.2014 Seite 4 von 17 2 Introduction This instruction manual describes the installation of the Palfinger RCP 915 RF radio transceiver module into a Palfinger radio remote control host system. Please read this manual carefully and completely before you begin to install the RF Transceiver into the Host system. Keep this Installation Manual on a safe place. Ignoring information in this manual may lead to faulty installation and damages either to the RF Trans-ceiver module or to the host system.
RCP 915 RF Installation Instructions RCP 915 RF Transceiver module RCP 915 RF Installation Instructions.docx Template V1.0, HAH 13.03.2014 Seite 5 von 17 3 RCP 915 RF Transceiver module Mounting holes Host connector Antenna connector
RCP 915 RF Installation Instructions Host Systems RCP 915 RF Installation Instructions.docx Template V1.0, HAH 13.03.2014 Seite 6 von 17 4 Host Systems 4.1 RCP 915 mobile unit 4.2 RCP 915 mobile unit antenna
RCP 915 RF Installation Instructions Host Systems RCP 915 RF Installation Instructions.docx Template V1.0, HAH 13.03.2014 Seite 7 von 17 4.3 RCP 915 base station 4.4 RCP 915 base station antenna
RCP 915 RF Installation Instructions Host system boards RCP 915 RF Installation Instructions.docx Template V1.0, HAH 13.03.2014 Seite 8 von 17 5 Host system boards 5.1 Host board mobile unit linear lever-big Host connector Mounting bolts
RCP 915 RF Installation Instructions Host system boards RCP 915 RF Installation Instructions.docx Template V1.0, HAH 13.03.2014 Seite 9 von 17 5.2 Host board mobile unit joystick-big Host connector Mounting bolts
RCP 915 RF Installation Instructions Host system boards RCP 915 RF Installation Instructions.docx Template V1.0, HAH 13.03.2014 Seite 10 von 17 5.3 Host board mobile unit linear lever-small Host connector Mounting bolts
RCP 915 RF Installation Instructions Host system boards RCP 915 RF Installation Instructions.docx Template V1.0, HAH 13.03.2014 Seite 11 von 17 5.4 Host board mobile unit joystick-small Host connector Mounting bolts
RCP 915 RF InstallationHost system boards RCP 915 RF Installation Instructions13.03.2014 5.5 Host board base sta n Instructions s.docx ation Host coTemplate V1.0, HAH Seite 12 von 17 Mounting bolts onnector
RCP 915 RF Installation Instructions Module Installation RCP 915 RF Installation Instructions.docx Template V1.0, HAH 13.03.2014 Seite 13 von 17 6 Module Installation 6.1 Module on mobile units Connect the module female connector to the mobile unit male connector. Take special care that every pin is connected properly. Fix the RCP 915 RF module with the screws on the mounting bolts on the mobile unit.
RCP 915 RF Installation Instructions Module Installation RCP 915 RF Installation Instructions.docx Template V1.0, HAH 13.03.2014 Seite 14 von 17 6.2 Antenna connection on mobile units Connect the antenna cable to the antenna connector on the RCP 915 RF module. Take special care that the connector is fixed properly. Connect antenna cable to the antenna connector on the dipole antenna Take special care that the connector is fixed properly.
RCP 915 RF InstallationModule Installation RCP 915 RF Installation Instructions13.03.2014 6.3 Module on base sta Connect the module female connTake special care that every pin Fix the RCP 915 RF module with n Instructions s.docx ation nector to the base station male connector. is connected properly. h the screws on the mounting bolts on the base st Template V1.0, HAH Seite 15 von 17 tation.
RCP 915 RF Installation Instructions Module Installation RCP 915 RF Installation Instructions.docx Template V1.0, HAH 13.03.2014 Seite 16 von 17 6.4 Antenna connection on base station Connect antenna cable to the antenna connector on the RCP 915 RF module like shown in chapter 6.2. Take special care that the connector is fixed properly. The picture shows the proper connected antenna cable.
RCP 915 RF Installation Instructions Legal issues for FCC (US) and IC (Canada) RCP 915 RF Installation Instructions.docx Template V1.0, HAH 13.03.2014 Seite 17 von 17 7 Legal issues for FCC (US) and IC (Canada) Changes or modifications made to the equipment not expressly approved by PALFINGER AG may void the FCC / IC authorization to operate this equipment. The use of the transceiver module is authorized in mobile or fixed host devices taking into account the conditions listed below: • OEM Integrator must ensure that the end user manual may not contain any information about the way to install or remove the module from the final product. • Depending on the final host device additional authorization requirements for the non-transmitter functions of the transmitter module may be required (i.e., Verification, or Declaration of Conformi-ty) The OEM integrator is responsible for ensuring that after the module is installed and opera-tional the host continues to be compliant with the Part 15B unintentional radiator requirements. • The information on the label and in the user manual is required to be incorporated in the user manual of the final host. See 47 CFR15 requirements for more details (e.g. 15.19 / 15.21 / 15.101 / 15.105 / RSS-GEN / ICES) • Additional label with the words ‘Contains FCC ID: Q68-RCP915RF001’ and ‘Contains IC: 10683A-RCP915RF001’ shall be applied and visible from the outside of the host product. • The module must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the module. • The end user manual for the final host product operating with this transmitter must include operat-ing instructions to satisfy RF exposure compliance requirements. Radiofrequency radiation exposure Information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled envi-ronment. This equipment should be installed and operated with minimum distance of 20 cm be-tween the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. • Only the antennas approved by PALFINGER AG must be used. The antennas may not be modi-fied. The antenna must not be co-located or operating in conjunction with any other antenna or transmitter. No additional antenna must be used. • When the final host product operating with this transmitter deviate from above, installation of this module into specific final hosts may require the submission of a Class II permissive change appli-cation containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. Feel free to contact us if additional guidance is required.

Navigation menu