PaloSanto Solutions MINIUCS Elastix miniUCS User Manual IPC110

PaloSanto Solutions Elastix miniUCS IPC110

Manual

1/11 IPC110IPC110IPC110IPC110 Motherboard Motherboard Motherboard Motherboard User ManualUser ManualUser ManualUser Manual Introduction IPC110 series CPU boards are small form factor system boards optimized for PBX and network security applications. With intel latest Z500P series processor,it is easy to develop a Fanless system which has more reliability .Integrated up to 3 ethenet ,IPC110 provide a flexible application for customer. A typical PBX application is , attaching PCIe voice card, to build total solution for little company communication. Or attaching MiniPCIe network card, to build up to 5 network port firewall device. Specification • CPU: Intel Atom Z510P 1.1GHz/ Z520P 1.3GHz /Z530P 1.6GHz • DRAM: Slot Onboard, up to 2GB DDR2 400/533 SDRAM (double side 1GB) • Chipset: Intel Poulsbo • SouthBridge: Poulsbo integrated • Storage: CompactFlash socket, 44pin PATA connector，1 SATA slot • Power: DC jack ,DC 12V • Three front panel LEDs, for 3 programmable GPO status indicator • Push button:for mode setting switch, accessing a programmable GPI, active low means switch is pressed • PCIe Interface : PCIe x4 Golden Finger • Expansion: 2 MiniPCIe slot • Connectivity: Up to 3 Ethernet channels (10/100/1000Mbps speed) 3 PCIe Ethernet controller Support PXE (for remote booting ) • I/O: 1*DB9 serial port, for debug console usage ,RS232, 3*USB 2.0 port • Board size: 6 x 6" (152.4 x 152.4 mm) • Firmware: AMI BIOS Operating system compatibility 1、Windows 2000/XP 2、Linux 3、DOS
2/11 IPC110 Connector and Jumper 1. Layout 2. Connector and Jumper List Name Function CN1 SDVO display output CN5 PCIe x4 Golden Finger CN6 Clear CMOS CN35 Main Power in Jacket CN9 Power Supply Jacket CN13 DDR2 Memory Slot CN3 Mini PCIe Slot 1 CN4 Mini PCIe Slot 2 CN21 Ethernet 1 CN22 Ethernet 2 CN19 Ethernet 3 CN20 Serial Port
3/11 CN24 PS/2 Keyboard and Mouse Port CN30 44 Pin IDE Interface CN32 Compact Flash Interface CN33 SATA Interface CN25 SATA power supply CN34 USB Port CN43 LPC interface JP2 Manual Reset In JP3 IDE/SATA Configuration CN2 External LEDs and GPIO CN38 USB connector CN10 SIM Socket CN27 POWER_LED Interface CN28 HDD_LED Interface CN29 Serial Port CN36 12V Interface CN31 12V Interface SW1 GPI switch System Status Indicator Name Function LED6 GPO use LED17 GPO use LED16 GPO use SW1 GPI use 3. Connector and Jumper Description CN1 SDVO Display Output ,SDVO (Serial Digital Video Out) is a proprietary Intel technology introduced with their motherboard chipsets Pin Name Pin Name 1 RED positive 2 Red negative 3 Ctrl Clk 4 Green positive 5 Green negative 6 Blue positive 7 Blue negative 8 CLK positive 9 CLK negative 10 Ctrl Data 11 Reset# 12 Gnd 13 Gnd 14 Gnd 15 3.3v 16 3.3v 17 3.3v 18 5v 19 5v 20 5v
4/11 CN6 clear CMOS Setting Function Close 1-2 Clear CMOS Open 1-2 (default) Normal CN35 Main Power Jacket DC in @12V 1 2 Pin Name 1 Gnd 2 Vin CN9 Power Supply Jacket DC out @12V Pin Name 1 Vin 2 Gnd CN13 DDR2 Memory Slot  1.8V  DDR2  Support for a maximum of 2GB of DRAM CN3 CN4 Mini PCIe Slot 1&2 Attach 3G SIM card to CN10, and attach MiniPCIe 3G module to CN3，，，，implement 3G function for IPC110.
5/11 CN21/CN22/CN19 Giga Ethernet Port Pin Name 1 BI_DA+ 2 BI_DA- 3 BI_DB+ 4 BI_DC+ 5 BI_DC- 6 BI_DB- 7 BI_DD+ 8 BI_DD-
6/11 CN20 Serial R232 Port COM0 (DB9 male) Pin Name 1 DCD 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI CN29 Serial R232 Port COM0 Pin Name 1 RX 2 TX 3 GND CN24 PS2 Keyboard and Mouse Port Pin Name 1 +5V 2 MSCLK 3 MSDATA 4 KBCLK 5 KBDATA 6 GND CN27 POWER_LED Interface Pin Name 1 PWR_LED_S3 2 GND 3 PWR_BTN 4 GND 5 PWR_LED 6 GND
7/11 CN28 HDD_LED Interface Pin Name 1 IDE_LED_P 2 IDE_LED_N 3 CF_LED_P 4 CF_LED_N 5 SATA_LED_P 6 SATA_LED_N CN30 44 Pin IDE Interface  44 pin (2.0mm pitch) for 2.5" harddisks. Controller Drive 1 or 2 Drive 1 or 2 +--+ +--+ +--+ |::|===================|::|============|::| <-Pin 1 |::|===================|::|============|::| |::|===================|::|============|::| |::|===================|::|============|::| |::|===================|::|============|::| |::|===================|::|============|::| |::|===================|::|============|::| +--+ +--+ +--+
8/11 CN32 CompactFlash Interface Pin Name Pin Name 1 GND 26 /CD1 2 D3 27 D11 3 D4 28 D12 4 D5 29 D13 5 D6 30 D14 6 D7 31 D15 7 /CE1 32 /CE2 8 A10 33 /VS1 9 /OE 34 /IORD 10 A9 35 /IOWR 11 A8 36 /WE 12 A7 37 /READY:/RDY:/IREQ 13 VCC 38 VCC 14 A6 39 CSEL Pin Name Pin Name 1 /RESET 23 /DIOW 2 GND 24 GND 3 DD7 25 /DIOR 4 DD8 26 GND 5 DD6 27 IORDY 6 DD9 28 SPSYNC:CSEL 7 DD5 29 /DMACK 8 DD10 30 GND 9 DD4 31 INTRQ 10 DD11 32 /IOCS16 11 DD3 33 DA1 12 DD12 34 PDIAG 13 DD2 35 DA0 14 DD13 36 DA2 15 DD1 37 /IDE_CS0 16 DD14 38 /IDE_CS1 17 DD0 39 /ACTIVE 18 DD15 40 GND 19 GND 41 +5V 20 KEY 42 +5V 21 DMARQ 43 GND 22 GND 44 GND
9/11 15 A5 40 /VS2 16 A4 41 RESET 17 A3 42 /WAIT 18 A2 43 /INPACK 19 A1 44 /REG 20 A0 45 /BVD2:SPKR 21 D0 46 /BVD1:STSCHG 22 D1 47 D8 23 D2 48 D9 24 /WP:/IOIS16 49 D10 25 /CD2 50 GND CN33 SATA Interface Pin Name 1 Ground 2 Transmit + 3 Transmit - 4 Ground 5 Receive - 6 Receive + 7 Ground CN31111////CN36 12V output Interface Pin Name 1 12V 2 Ground CN25 SATA Power Supply Pin Name 1 5v 2 Ground 3 Ground 4 12v
10/11 CN34 USB Port 2 USB2.0 ports . 500 mA Continuous Current per Channel. Short-Circuit and Thermal Protection With Overcurrent Logic. Pin Name 1 5v 2 Data- 3 Data+ 4 Ground CN38 USB connector Pin Name 1 5v 2 Data- 3 Data+ 4 Ground CN43 LPC Interface Pin Name Pin Name 1 LPC_CLK 9 AD3 2 SERIRQ 10 +3.3V 3 AD0 11 FRAME# 4 NC 12 GND 5 AD1 13 GND 6 GND 14 NC 7 AD2 15 48MHz_CLK 8 +5V 16 NC JP2 Manual Reset In Setting Function Close 1-2 Reset System Open 1-2 (default) Normal
11/11 JP3 IDE/SATA Configuration 2*4*2.0mm header Default Setting Function Open 1-2 CF Slave (close it means CF master) Close 3-4 IDE Master (open it means IDE slave) Close 5-6 Disable SATA (default) Note:1. There's a important principle that only one device can be allowed to exsit in one master (slave) simultaneously. IDE device Should be a SATA hard disk drive ,a type II CF card, or a IDE hard disk drive. 2. You should disable SATA (close 5-6) first before attach CF card or IDE hard disk ,.. If not ,system will spend more time to detect IDE devices. That means Pin 5-6 are only open at the case when user using SATA hard disk.
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 　 Reorient or relocate the receiving antenna. 　 Increase the separation between the equipment and receiver. 　 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 　 Consult the dealer or an experienced radio/TV technician for help.

Navigation menu