Panasonic Devices Europe 1761 Bluetooth Smart Module User Manual TABLE OF CONTENTS

Download:
Mirror Download [FCC.gov]
Document ID	3482203
Application ID	ffglr8UKW+0rLn+LWqK54w==
Document Description	UserMan
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	80.91kB (1011416 bits)
Date Submitted	2017-07-26 00:00:00
Date Available	2017-07-26 00:00:00
Creation Date	2017-03-23 12:16:14
Producing Software	Microsoft® Word 2010
Document Lastmod	2017-03-23 12:16:14
Document Title	TABLE OF CONTENTS
Document Creator	Microsoft® Word 2010
Document Author:	hkaehler

CLASSIFICATION
PRODUCT SPECIFICATION
CLASS 2 BLUETOOTH LOW ENERGY + NFC
SINGLE MODE MODULE
CUSTOMER’S CODE
PANASONIC’S CODE
ENW89848A1KF
PAN1761
SUBJECT
No.
DS-1761-2400-102
REV.
1.1
PAGE
1 of 29
DATE
23.03.2017
Product Specification
Applicant / Manufacturer
Hardware
Panasonic Industrial Devices Europe GmbH
Zeppelinstrasse 19
21337 Lüneburg
Germany
Applicant / Manufacturer
Toshiba
Software
Software Version
Please refer to chapter 19
By purchase of any of products described in this document the customer accepts the
document's validity and declares their agreement and understanding of its contents and
recommendations. Panasonic reserves the right to make changes as required without
notification.
Power Electronics R&D Center
Wireless Connectivity
Panasonic Industrial Devices Europe GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
CLASSIFICATION
PRODUCT SPECIFICATION
CLASS 2 BLUETOOTH LOW ENERGY + NFC
SINGLE MODE MODULE
CUSTOMER’S CODE
PANASONIC’S CODE
ENW89848A1KF
PAN1761
SUBJECT
No.
DS-1761-2400-102
REV.
1.1
PAGE
2 of 29
DATE
23.03.2017
TABLE OF CONTENTS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
Scope of this Document ................................................................................................ 4
Key Features ................................................................................................................. 4
Bluetooth Low Energy ................................................................................................... 5
Applications for the Module ........................................................................................... 5
Description for the Module............................................................................................. 5
PAN1761 Detailed Description ...................................................................................... 6
6.1. PIN Assignment ................................................................................................... 6
6.2. PIN Functions ...................................................................................................... 7
6.3. Block Diagram ...................................................................................................... 8
Test Conditions ............................................................................................................. 9
General Device Requirements and Operation ............................................................... 9
8.1. Absolute Maximum Ratings .................................................................................. 9
8.2. Recommended Operating Conditions................................................................... 9
8.4. Power up sequence ........................................................................................... 10
8.5. PAN1761 Current Consumption ......................................................................... 10
Bluetooth RF Performance .......................................................................................... 11
9.1. PAN1761 Bluetooth Characteristics ................................................................... 11
9.2. PAN1761 NFC tag Interface ............................................................................... 11
9.3. NFC Operational Sequence ............................................................................... 12
Soldering Temperature-Time Profile (for reflow soldering)........................................... 13
10.1. For lead solder ................................................................................................... 13
10.2. For leadfree solder ............................................................................................. 13
PAN1761 Module Dimension ...................................................................................... 14
Footprint of the Module ............................................................................................... 15
Case Marking .............................................................................................................. 16
13.1. Example for Marking .......................................................................................... 16
13.2. Marking Definition .............................................................................................. 16
Mechanical Requirements ........................................................................................... 16
Development of Applications ....................................................................................... 17
Reliability Tests ........................................................................................................... 17
Cautions ...................................................................................................................... 17
17.1. Design Notes ..................................................................................................... 17
17.2. Installation Notes................................................................................................ 18
17.3. Usage Conditions Notes..................................................................................... 18
17.4. Storage Notes .................................................................................................... 19
17.5. Safety Cautions .................................................................................................. 19
17.6. Other cautions .................................................................................................... 19
Packaging ................................................................................................................... 21
18.1. PAN1761 Tape Dimension ................................................................................. 21
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
PRODUCT SPECIFICATION
CLASS 2 BLUETOOTH LOW ENERGY + NFC
SINGLE MODE MODULE
CUSTOMER’S CODE
PANASONIC’S CODE
ENW89848A1KF
PAN1761
SUBJECT
19.
20.
21.
22.
23.
24.
25.
26.
No.
DS-1761-2400-102
REV.
1.1
PAGE
3 of 29
DATE
23.03.2017
18.2. Packing in Tape ................................................................................................. 22
18.3. Component Direction ......................................................................................... 22
18.4. Reel Dimension .................................................................................................. 23
18.5. Label for Package .............................................................................................. 24
18.6. Total Package .................................................................................................... 24
Ordering Information ................................................................................................... 25
RoHS and REACH Declaration ................................................................................... 25
Data Sheet Status ....................................................................................................... 25
History for this Document ............................................................................................ 25
Related Documents ..................................................................................................... 26
Radiation Pattern of Antenna ...................................................................................... 27
General Information..................................................................................................... 29
Life Support Policy ...................................................................................................... 29
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
No.
DS-1761-2400-102
PRODUCT SPECIFICATION
CLASS 2 BLUETOOTH LOW ENERGY + NFC
SINGLE MODE MODULE
CUSTOMER’S CODE
PANASONIC’S CODE
ENW89848A1KF
PAN1761
SUBJECT
REV.
1.1
PAGE
4 of 29
DATE
23.03.2017
1. SCOPE OF THIS DOCUMENT
This product specification applies to Panasonic’s, Class 2, Bluetooth® low energy single mode module with
NFC , series number: PAN1761
2. KEY FEATURES












Same form factor and footprint as PAN1760
Bluetooth 4.1 (LE) embedded GATT profile with high level API commands, compatible to Toshiba
reference BLE profiles
Surface mount type 15.6 x 8.7 x 1.8 mm³
Tx power 0 dBm, Rx sensitivity -90 dBm
Compliant to BT 4.1
32kB on-chip RAM for application software and driver
512kBit eeprom to download user program during start up
Operation with external host or as host-less ( stand alone)
Standard SIG BLE and “SPP over BLE” profiles available
Temperature Range from -30°C to +85°C
NFC Forum Tag Type 3 wired interface
1520kB built-in EEPROM NFC memory
Bluetooth is a registered trademark of the Bluetooth Special Interest Group.
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
PRODUCT SPECIFICATION
CLASS 2 BLUETOOTH LOW ENERGY + NFC
SINGLE MODE MODULE
CUSTOMER’S CODE
PANASONIC’S CODE
ENW89848A1KF
PAN1761
SUBJECT
No.
DS-1761-2400-102
REV.
1.1
PAGE
5 of 29
DATE
23.03.2017
3. BLUETOOTH LOW ENERGY
Bluetooth Low Energy (BLE), part of Bluetooth Ver. 4.0, specifies two types of implementation: Single mode
and dual mode. Single mode devices implement the low energy specification and consume just a fraction of
the power of classic Bluetooth, allowing the short-range wireless standard to extend to coin cell battery
applications for the first time. Dual mode devices combine Bluetooth Low Energy and classic Bluetooth and
are likely to become a de facto feature in almost all new Bluetooth enabled cellular phones and computers.
Single mode Bluetooth 4.0 Low Energy is not backwards compatible with previous Bluetooth classic
standards. Dual mode Bluetooth 4.0 is backwards compatible to Bluetooth classic and well suited for
gateway applications, but is not practical for low power devices.
4. APPLICATIONS FOR THE MODULE






All Embedded Wireless Applications
Wearable Devices
Health Care, Medical Diagnostic Systems
Mobile phone accessories
Industrial Measurement and Diagnostics
Devices where Power Consumption is critical
5. DESCRIPTION FOR THE MODULE
The PAN1761 is a short-range, Class 2, BLE single mode module for implementing Bluetooth functionality
into various electronic devices. A block diagram can be found in chapter 6.3.
The PAN1761 is a cost-effective, low-power, true system-on-chip (SoC) for Bluetooth low energy
applications. It enables robust BLE central and peripheral nodes to be built with very low total bill-of-material
costs. The PAN1761 combines an excellent RF transceiver programmable EEPROM memory, 32-KB RAM,
and many other powerful supporting features and peripherals. The PAN1761 is suitable for systems where
very low power consumption is required. Very low-power sleep modes are available. Short transition times
between operating modes further enable low power consumption.
Panasonic PAN1761 offers an embedded and certified Bluetooth low energy protocol stack and BLE GATT
profile inside the silicon device from Toshiba. The Bluetooth low energy protocol stack from Toshiba, is a
flexible and cost-effective single-mode Bluetooth low energy solution. Standard BLE or proprietary profiles
are available for seamless integration into the application code.
Please contact your local Panasonic Sales office for details on additional product options and services:
For Panasonic Sales assistance in the EU, visit
https://eu.industrial.panasonic.com/about-us/contact-us
Email: wireless@eu.panasonic.com
For Panasonic Sales assistance in North America, visit
https://na.industrial.panasonic.com/distributors
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
No.
DS-1761-2400-102
PRODUCT SPECIFICATION
CLASS 2 BLUETOOTH LOW ENERGY + NFC
SINGLE MODE MODULE
CUSTOMER’S CODE
PANASONIC’S CODE
ENW89848A1KF
PAN1761
SUBJECT
REV.
1.1
PAGE
6 of 29
DATE
23.03.2017
6. PAN1761 DETAILED DESCRIPTION
6.1. PIN ASSIGNMENT
Top View, Application PCB
15.6 mm
5.0
1.2
2.4
F2
F3
F4
F5
F6
F7
F8
F9
E1
E2
E3
E4
E5
E6
E7
E8
E9
D1
D2
D3
D4
D5
D6
D7
D8
D9
C1
C2
C3
C4
C5
C6
C7
C8
C9
B1
B2
B3
B4
B5
B6
B7
B8
B9
A1
A2
A3
A4
A5
A6
A7
A8
A9
F11
F12
A11
A12
1.35
1.2
F1
8.70 mm
0.6
1.35
1.0
0.6
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
No.
DS-1761-2400-102
PRODUCT SPECIFICATION
CLASS 2 BLUETOOTH LOW ENERGY + NFC
SINGLE MODE MODULE
CUSTOMER’S CODE
PANASONIC’S CODE
ENW89848A1KF
PAN1761
SUBJECT
REV.
1.1
PAGE
7 of 29
DATE
23.03.2017
6.2. PIN FUNCTIONS
No
PIN Name
A1
A2
A3
A4
A5
A6
A7
A8
A9
A11
A12
B1
B2
B3
B4
B5
B6
B7
B8
B9
C1
C2
C3
C4
C5
C6
C7
C8
C9
D1
D2
D3
D4
D5
D6
D7
D8
D9
E1
E2
E3
E4
E5
E6
E7
E8
E9
F1
F2
F3
F4
GND
NC
Reset
VCC
VCC
VCC
GND
NC
GND
GND
GND
NC
TAG_L0
TAG_SCL
NC
NC
NC
NC
NC
NC
NC
TAG_L1
TAG_RFDET
NC
NC
TAG_READYX
TAG_SDA
GND
GND
NC
NC
GPIO1
Wakup
NC
TAG_PONX
GND
GND
NC
GPIO8
GPIO7
NC
NC
TAG_RECTOUT
UART_RXD
GPIO2
GND
GND
GND
EEPROM_WP
NC
NC
F5
GPIO6
F6
F7
SLEEPXCLKIN
UART_TXD
F8
GPIO5
F9
F11
F12
GND
GND
GND
Alternative PIN
Pin Type
Description
Ground Pin
Digital Input
Power
Power
Power
Ground Pin
Ground Pin
Ground Pin
Ground Pin
Connect to Ground
Not Connected
Reset, active-low
2V – 3.6V analog/digital power supply connection
2V – 3.6V analog/digital power supply connection
2V – 3.6V analog/digital power supply connection
Connect to Ground
Not Connected
Connect to Ground
Connect to Ground
Connect to Ground
Not Connected
NFC_Antenna
NFC_I2C
Not Connected
Not Connected
Not Connected
Not Connected
Not Connected
Not Connected
Not Connected
NFC_Antenna
Digital Out
Not Connected
Not Connected
PWM2
AIN0
GPIO0
Digital Out
NFC_I2C
Ground Pin
Ground Pin
Connect to Ground
Connect to Ground
Not Connected
Not Connected
Digital I/O
Digital I/O
Not Connected
Digital In
Ground Pin
Ground Pin
SDA
SCL
Digital I/O
Digital I/O
GPIO4
PWM0/AIN1
Digital In
Digital I/O
Ground Pin
Ground Pin
Ground Pin
Digital In
UART_1-CTS/
UART2-RX
GPIO3
UART1_RTS/
UART2-TX
Connect to Ground
Connect to Ground
Not Connected/Placeholder for Antenna
Connected to internal EEPROM
Connected to internal EEPROM
Not Connected
Not Connected
Connect to Ground
Connect to Ground
Connect to Ground
EEPROM write protect /active low
Not Connected
Not Connected
Digital In
Can be configured to UART2_RXD
Clock
Digital Out
32.768 KHz sleep clock input
Digital I/O
Can be configured to UART2_TXD
Ground Pin
Ground Pin
Ground Pin
Connect to Ground
Connect to Ground
Connect to Ground
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
No.
DS-1761-2400-102
PRODUCT SPECIFICATION
CLASS 2 BLUETOOTH LOW ENERGY + NFC
SINGLE MODE MODULE
CUSTOMER’S CODE
PANASONIC’S CODE
ENW89848A1KF
PAN1761
SUBJECT
REV.
1.1
PAGE
8 of 29
DATE
23.03.2017
6.3. BLOCK DIAGRAM
EEPROM
PAN1761
Crystal
26 MHz
BLE Antenna
VCC/VSS
UART
GPIO
Slow Clock 32.768 kHz
Toshiba
Single Mode
Bluetooth LSI
Filter
Wake Up Input/Output
I2C Tag Memory
NFC Wake Up
External NFC Antenna
Toshiba
NFC – TAG
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
No.
DS-1761-2400-102
PRODUCT SPECIFICATION
CLASS 2 BLUETOOTH LOW ENERGY + NFC
SINGLE MODE MODULE
CUSTOMER’S CODE
PANASONIC’S CODE
ENW89848A1KF
PAN1761
SUBJECT
REV.
1.1
PAGE
9 of 29
DATE
23.03.2017
7. Test Conditions
Measurements shall be made under operating free-air temperature range unless otherwise specified.
Temperature
Humidity
Supply Voltage
25 ± 10°C
40 to 85%RH
3.3V
8. GENERAL DEVICE REQUIREMENTS AND OPERATION
All specifications are over temperature and process, unless indicated otherwise.
8.1. ABSOLUTE MAXIMUM RATINGS
See 2
No
Value
Unit
–0.3 to
VDD+0.3
Ratings Over Operating Free-Air Temperature Range
Voltage on any digital pin
Operating ambient temperature range
–30 to 85
°C
Storage temperature range
–30 to 125
°C
Bluetooth RF inputs
10
dBm
ESD:
All pads, according to human-body model, JEDEC STD 22, method A114
According to charged-device model, JEDEC STD 22, method C101
1000
500
8.2. RECOMMENDED OPERATING CONDITIONS
No
Rating
Min
Typ
Max
Unit
Power supply voltage
2.0
3.3
3.6
Maximum ambient operating temperature
-30
85
C
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the
device. These are stress ratings only and functional operation of the device at these or any other conditions
beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolutemaximum-rated conditions for extended periods may affect device reliability.
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
PRODUCT SPECIFICATION
CLASS 2 BLUETOOTH LOW ENERGY + NFC
SINGLE MODE MODULE
CUSTOMER’S CODE
PANASONIC’S CODE
ENW89848A1KF
PAN1761
SUBJECT
No.
DS-1761-2400-102
REV.
1.1
PAGE
10 of 29
DATE
23.03.2017
8.4. POWER UP SEQUENCE
When the power is turned on, set reset signal to low (RESET=Low). After OSC is stable,
release reset (RESET=High).
Crystal oscillator stabilizing time is about 2 msec, so define release time after sufficient
evaluation.
When the power is turned off, set reset signal to low (RESET=Low).
VDD power supply
Reset signal
DCDC / LDO output
Reference clock
Unstable
Power off
RC delay
Power on
voltage
detection
OSC boot timer
Stable
Operation
8.5. PAN1761 CURRENT CONSUMPTION
The current consumption is dependent on the user scenario and the setup and timing in the
low power modes. The total power consumption can be optimized by adjusting advertising
and connection intervals. It also depends on the system configuration of the central device
(typically mobile phone or BLE hub).
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
No.
DS-1761-2400-102
PRODUCT SPECIFICATION
CLASS 2 BLUETOOTH LOW ENERGY + NFC
SINGLE MODE MODULE
CUSTOMER’S CODE
PANASONIC’S CODE
ENW89848A1KF
PAN1761
SUBJECT
REV.
1.1
PAGE
11 of 29
DATE
23.03.2017
9. BLUETOOTH RF PERFORMANCE
9.1. PAN1761 BLUETOOTH CHARACTERISTICS
No
Characteristics
Operation frequency range
Channel spacing
Output Power
Sensitivity, High Gain Mode
9.2.
Condition
Min
Typ
2402
Max
Unit
2480
MHz
MHz
Maximum setting, measured at single
ended 50ohm.
dBm
High-gain mode, measured at single
ended 50ohm.
-90.0
dBm
PAN1761 NFC TAG INTERFACE
PAN1761 has a NFC Forum Type 3 Tag (NFC Tag) function built-in.
Features of PAN1761 NFC interface:
 Built-in Contactless IC Card Technology
 Wireless interface:Automatic detection of transmission speed 212kbps and 424kbps
 I2C interface: Maximum operational clock 400kHz
 Built-in EEPROM: General user area 1520 bytes, Protecting against defective data
 Writing time:5ms(typ.),1bit error automatic correction , CRC automatic addition, and
error detection of read data.
 Security:Mutual authentication with Message authentication code (MAC), Variety
access attributes can be set. Writing prohibition, reading after authentication, writing
after authentication, writing with MAC
Technology refers to the following standards : JIS X 6319-4, ISO/IEC 18092
Basic technical characteristics are in table below:
No
Item
Remarks
Data transmission format
Half Duplex,synchronization
Carrier Frequency
13.56MHz
Data transmission speed
212,424 Kbit/s (Automatic detection)
Modulation
ASK
Coding
Manchester
Bit order
MSBF
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
PRODUCT SPECIFICATION
CLASS 2 BLUETOOTH LOW ENERGY + NFC
SINGLE MODE MODULE
CUSTOMER’S CODE
PANASONIC’S CODE
ENW89848A1KF
PAN1761
SUBJECT
No.
DS-1761-2400-102
REV.
1.1
PAGE
12 of 29
DATE
23.03.2017
9.3. NFC OPERATIONAL SEQUENCE
If a wireless carrier is detected, TAG_RFDET pin outputs high level. If the wireless carrier
disappears, TAG_RFDET pin turns back to low level due to pull-down resistance. Set
VDDIO and VDD pin to output high (power supply).. At Write without Encryption or Read
without Encryption, if IDm stored in PAN1761 chip and iDm with command are consistent,
TAG_READYX pin outputs high level. After that, during supply of internal power source,
the high is kept. VDDIO and VDD pin needs power supply for TAG_READYX pin to output
high.
By becoming high in TAG_READYX pin, HOST can get to know that wireless reader
writer accesses PAN1761 module.
Sequence example of operation over the wireless TAG interface
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
PRODUCT SPECIFICATION
CLASS 2 BLUETOOTH LOW ENERGY + NFC
SINGLE MODE MODULE
CUSTOMER’S CODE
PANASONIC’S CODE
ENW89848A1KF
PAN1761
SUBJECT
No.
DS-1761-2400-102
REV.
1.1
PAGE
13 of 29
DATE
23.03.2017
10. SOLDERING TEMPERATURE-TIME PROFILE (FOR REFLOW SOLDERING)
10.1. FOR LEAD SOLDER
10 1s
Recommended temp. profile
for reflow soldering
30 +20/-10s
235°C max.
Temp.[°C]
220 5°C
200°C
150 10°C
90 30s
Time [s]
10.2. FOR LEADFREE SOLDER
Our used temp. profile
for reflow soldering
30 +20/-10s
Temp.[°C]
230°C -250°C max.
220°C
150°C – 190°C
90 30s
Time [s]
Reflow permissible cycle: 2
Opposite side reflow is prohibited due to module weight.
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
PRODUCT SPECIFICATION
CLASS 2 BLUETOOTH LOW ENERGY + NFC
SINGLE MODE MODULE
CUSTOMER’S CODE
PANASONIC’S CODE
ENW89848A1KF
PAN1761
SUBJECT
No.
DS-1761-2400-102
REV.
1.1
PAGE
14 of 29
DATE
23.03.2017
11. PAN1761 MODULE DIMENSION
No.
Item
Dimension
Tolerance
Width
8.70
 0.30
Length
15.60
 0.30
Height
1.80
 0.20
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
Remark
With case
www.pideu.panasonic.de
CLASSIFICATION
No.
DS-1761-2400-102
PRODUCT SPECIFICATION
CLASS 2 BLUETOOTH LOW ENERGY + NFC
SINGLE MODE MODULE
CUSTOMER’S CODE
PANASONIC’S CODE
ENW89848A1KF
PAN1761
SUBJECT
REV.
1.1
PAGE
15 of 29
DATE
23.03.2017
12. FOOTPRINT OF THE MODULE
All dimensions are in millimeters.
The outer dimensions have a tolerance of  0.3mm.
Top view, Application PCB
15.6 mm
5.0
1.2
2.4
F2
F3
F4
F5
F6
F7
F8
F9
E1
E2
E3
E4
E5
E6
E7
E8
E9
D1
D2
D3
D4
D5
D6
D7
D8
D9
C1
C2
C3
C4
C5
C6
C7
C8
C9
B1
B2
B3
B4
B5
B6
B7
B8
B9
A1
A2
A3
A4
A5
A6
A7
A8
A9
F11
F12
A11
A12
1.35
1.2
F1
8.70 mm
0.6
1.35
1.0
0.6
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
No.
DS-1761-2400-102
PRODUCT SPECIFICATION
CLASS 2 BLUETOOTH LOW ENERGY + NFC
SINGLE MODE MODULE
CUSTOMER’S CODE
PANASONIC’S CODE
ENW89848A1KF
PAN1761
SUBJECT
REV.
1.1
PAGE
16 of 29
DATE
23.03.2017
13. CASE MARKING
No.
Remark
Marking for Pin 1 (Circle 0,15 mm)
2D-Code, for internal usage only and
can be change without any notice
Marking definition see below
13.1. EXAMPLE FOR MARKING
P A N 1 7 6
E N W 8 9 8
Y Y W W D L
H W / S W
4 8 A 1 K F
13.2. MARKING DEFINITION
(1) Pin1 marking
(2) 2D code (Serial number)
(3) Marking:
PAN1761 (Model Name), HW/SW (Hardware/Software version)
ENW89848A1KF (Part Number, refer to chapter 19 Ordering Information)
Lot code (YearYear, WeekWeek, Day, LotLot)
ES (Engineering Sample marking)
Note: For available Software Versions, refer to [1] PAN1761ETU Design-Guide.
and chapter 19 Ordering Information.
14. MECHANICAL REQUIREMENTS
No.
Item
Solderability
Resistance to soldering
heat
Limit
Condition
More than 75% of the soldering area shall be
coated by solder
It shall be satisfied electrical requirements and not
be mechanical damage
Reflow soldering with
recommendable temperature profile
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
See chapter 10.2
www.pideu.panasonic.de
CLASSIFICATION
No.
DS-1761-2400-102
PRODUCT SPECIFICATION
CLASS 2 BLUETOOTH LOW ENERGY + NFC
SINGLE MODE MODULE
CUSTOMER’S CODE
PANASONIC’S CODE
ENW89848A1KF
PAN1761
SUBJECT
REV.
1.1
PAGE
17 of 29
DATE
23.03.2017
15. DEVELOPMENT OF APPLICATIONS
For development support please refer to [1] PAN1761ETU Design-Guide.
16. RELIABILITY TESTS
The measurement should be done after being exposed to room temperature and humidity for 1 hour.
No.
Item
Limit
Condition
Vibration test
Electrical parameter should be in
specification
a) Freq.:10~50Hz,Amplitude:1.5mm
a) 20min. / cycle,1hrs. each of XYZ axis
b) Freq.:30~100Hz, 6G
b) 20min. / cycle,1hrs. each of XYZ axis
Shock test
the same as above
Dropped onto hard wood from height of 50cm for 3 times
Heat cycle test
the same as above
-40°C for 30min. and +85°C for 30min.;
each temperature 300 cycles
Moisture test
the same as above
+60°C, 90% RH, 300h
Low temp. test
the same as above
-40°C, 300h
High temp. test
the same as above
+85°C, 300h
17. CAUTIONS
Failure to follow the guidelines set forth in this document may result in degrading of the product’s functions
and damage to the product.
17.1. DESIGN NOTES
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Follow the conditions written in this specification, especially the control signals of
this module.
The supply voltage has to be free of AC ripple voltage (for example from a battery
or a low noise regulator output). For noisy supply voltages, provide a decoupling
circuit (for example a ferrite in series connection and a bypass capacitor to ground
of at least 47uF directly at the module).
This product should not be mechanically stressed when installed.
Keep this product away from heat. Heat is the major cause of decreasing the life
of these products.
Avoid assembly and use of the target equipment in conditions where the products'
temperature may exceed the maximum tolerance.
The supply voltage should not be exceedingly high or reversed. It should not carry
noise and/or spikes.
Keep this product away from other high frequency circuits.
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
PRODUCT SPECIFICATION
CLASS 2 BLUETOOTH LOW ENERGY + NFC
SINGLE MODE MODULE
CUSTOMER’S CODE
PANASONIC’S CODE
ENW89848A1KF
PAN1761
SUBJECT
No.
DS-1761-2400-102
REV.
1.1
PAGE
18 of 29
DATE
23.03.2017
17.2. INSTALLATION NOTES
(1)
Reflow soldering is possible twice based on the conditions in chapter 15.
Set up the temperature at the soldering portion of this product according to this
reflow profile.
(2) Carefully position the products so that their heat will not burn into printed circuit
boards or affect the other components that are susceptible to heat.
(3) Carefully locate these products so that their temperatures will not increase due to
the effects of heat generated by neighboring components.
(4) If a vinyl-covered wire comes into contact with the products, then the cover will
melt and generate toxic gas, damaging the insulation. Never allow contact between
the cover and these products to occur.
(5) This product should not be mechanically stressed or vibrated when reflowed.
(6) To repair the board by hand soldering, follow the conditions set forth in this
chapter.
(7) Do not wash this product.
(8) Refer to the recommended pattern when designing a board.
(9) Pressing on parts of the metal cover or fastening objects to the metal will cause
damage to the unit.
(10) For more details on LGA (Land Grid Arrey) soldering processes refer to the
application note.
17.3. USAGE CONDITIONS NOTES
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Take measures to protect the unit against static electricity.
If pulses or other transient loads (a large load applied in a short time) are applied
to the products, check and evaluate their operation befor assembly on the final
products.
Do not use dropped products.
Do not touch, damage or soil the pins.
Follow the recommended condition ratings about the power supply applied to this
product.
Electrode peeling strength: Do not add pressure of more than 4.9N when soldered
on PCB.
Pressing on parts of the metal cover or fastening objects to the metal cover will
cause damage.
These products are intended for general purpose and standard use in general
electronic equipment, such as home appliances, office equipment, information and
communication equipment.
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
PRODUCT SPECIFICATION
CLASS 2 BLUETOOTH LOW ENERGY + NFC
SINGLE MODE MODULE
CUSTOMER’S CODE
PANASONIC’S CODE
ENW89848A1KF
PAN1761
SUBJECT
No.
DS-1761-2400-102
REV.
1.1
PAGE
19 of 29
DATE
23.03.2017
17.4. STORAGE NOTES
(1)
(2)
(3)
(4)
(5)
The module should not be stressed mechanically during storage.
Do not store these products in the following conditions or the performance
characteristics of the product, such as RF performance will be adversely affected:
 Storage in salty air or in an environment with a high concentration of corrosive gas,
such as Cl2, H2S, NH3, SO2, or NOX
 Storage in direct sunlight
 Storage in an environment where the temperature may be outside the range of 5°C
to 35°C range, or where the humidity may be outside the 45 to 85% range.
 Storage of the products for more than one year after the date of delivery Storage
period: Please check the adhesive strength of the embossed tape and soldering
after 6 months of storage.
Keep this product away from water, poisonous gas and corrosive gas.
This product should not be stressed or shocked when transported.
Follow the specification when stacking packed crates (max. 10).
17.5. SAFETY CAUTIONS
These specifications are intended to preserve the quality assurance of products and
individual components.
Before use, check and evaluate the operation when mounted on your products. Abide by
these specifications, without deviation when using the products. These products may shortcircuit. If electrical shocks, smoke, fire, and/or accidents involving human life are anticipated
when a short circuit occurs, then provide the following failsafe functions, as a minimum.
(1) Ensure the safety of the whole system by installing a protection circuit and a
protection device.
(2) Ensure the safety of the whole system by installing a redundant circuit or another
system to prevent a single fault causing an unsafe status.
17.6. OTHER CAUTIONS
(1)
(2)
(3)
(4)
(5)
This specification sheet is copyrighted. Please do not disclose it to a third party.
Please do not use the products for other purposes than those listed.
Be sure to provide an appropriate fail-safe function on your product to prevent an
additional damage that may be caused by the abnormal function or the failure of
the product.
This product has been manufactured without any ozone chemical controlled under
the Montreal Protocol.
These products are not intended for other uses, other than under the special
conditions shown below. Before using these products under such special
conditions, check their performance and reliability under the said special conditions
carefully to determine whether or not they can be used in such a manner.
 In liquid, such as water, salt water, oil, alkali, or organic solvent, or in places
where liquid may splash.
 In direct sunlight, outdoors, or in a dusty environment
 In an environment where condensation occurs.
 In an environment with a high concentration of harmful gas (e.g. salty air, HCl,
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
PRODUCT SPECIFICATION
CLASS 2 BLUETOOTH LOW ENERGY + NFC
SINGLE MODE MODULE
CUSTOMER’S CODE
PANASONIC’S CODE
ENW89848A1KF
PAN1761
SUBJECT
(6)
(7)
No.
DS-1761-2400-102
REV.
1.1
PAGE
20 of 29
DATE
23.03.2017
Cl2, SO2, H2S, NH3, and NOX)
If an abnormal voltage is applied due to a problem occurring in other components
or circuits, replace these products with new products because they may not be
able to provide normal performance even if their electronic characteristics and
appearances appear satisfactory.
When you have any question or uncertainty, contact Panasonic.
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
PRODUCT SPECIFICATION
CLASS 2 BLUETOOTH LOW ENERGY + NFC
SINGLE MODE MODULE
CUSTOMER’S CODE
PANASONIC’S CODE
ENW89848A1KF
PAN1761
SUBJECT
No.
DS-1761-2400-102
REV.
1.1
PAGE
21 of 29
DATE
23.03.2017
18. PACKAGING
If the product has mass production status, indicated in chapter 21, we will deliver the module in the package
which are described below.
18.1. PAN1761 TAPE DIMENSION
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
No.
DS-1761-2400-102
PRODUCT SPECIFICATION
CLASS 2 BLUETOOTH LOW ENERGY + NFC
SINGLE MODE MODULE
CUSTOMER’S CODE
PANASONIC’S CODE
ENW89848A1KF
PAN1761
SUBJECT
REV.
1.1
PAGE
22 of 29
DATE
23.03.2017
18.2. PACKING IN TAPE
Direction of unreeling (for customer)
trailer (empty)
1 x circumference /
hub
(min 160mm)
component
packed area
standard
1500pcs
leader (empty)
minimum 10 pitch
Top cover tape more
than 1 x
circumference plus
100mm to avoid
fixing of tape end on
sealed modules.
Empty spaces in component packed area shall be less than two per reel and those spaces
shall not be consecutive.
100730-PAN1720.vsd
Top cover tape shall not be found on reel holes and shall not
stick out from reel.
18.3. COMPONENT DIRECTION
Pin 1 Marking
(Top Side)
Direction of
unreeling
(for customer)
Pin 1 Marking
(Bottom Side)
Square Pin, all the
others are round.
100730-PAN1720.vsd
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
PRODUCT SPECIFICATION
CLASS 2 BLUETOOTH LOW ENERGY + NFC
SINGLE MODE MODULE
CUSTOMER’S CODE
PANASONIC’S CODE
ENW89848A1KF
PAN1761
SUBJECT
No.
DS-1761-2400-102
REV.
1.1
PAGE
23 of 29
DATE
23.03.2017
18.4. REEL DIMENSION
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
No.
DS-1761-2400-102
PRODUCT SPECIFICATION
CLASS 2 BLUETOOTH LOW ENERGY + NFC
SINGLE MODE MODULE
CUSTOMER’S CODE
PANASONIC’S CODE
ENW89848A1KF
PAN1761
SUBJECT
REV.
1.1
PAGE
24 of 29
DATE
23.03.2017
18.5. LABEL FOR PACKAGE
The picture shows an example from similar product.
105 mm
PAN1315
51 mm
Customer Code
(1T)
ENW89818C2JF
(1P)
Lot code [YYWWDLL]
Example from above:
YY
year
printed 08
WW
normal calendar week
printed 01
day
printed 5 (Friday)
line identifier, if more as one
printed 1
lot identifier per day
printed 1
Customer Order Code, if any, otherwise company name will be printed
(2P)
Panasonic Order Code: ENW89848A1KF
(9D)
Date code as [YYWW]
(Q)
Quantity [XXXX], variable max. 1500
(HW/SW)
Hardware /Software Release
Hardware 01
Indicates the HW revision.
Software 01
Indicates the SW revision.
18.6. TOTAL PACKAGE
moisture-sensitive print
(already exist on barrier bag)
barcode
label
barrier bag
sealed
desiccant 1) 2)
moisture indicator
barcode
label
1) quantity of desiccant according
to calculation
2) optional: desiccant placed into
the corner of the barrier bag
inner carton box
size 340 x 340 x 41 mm³
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
No.
DS-1761-2400-102
PRODUCT SPECIFICATION
CLASS 2 BLUETOOTH LOW ENERGY + NFC
SINGLE MODE MODULE
CUSTOMER’S CODE
PANASONIC’S CODE
ENW89848A1KF
PAN1761
SUBJECT
REV.
1.1
PAGE
25 of 29
DATE
23.03.2017
19. ORDERING INFORMATION
Ordering part number
Description
MOQ (1)
ENW89848A1KF (2)
PAN1761
CLASS 2 Bluetooth single mode Module according BT-4.1.
Bluetooth® low energy device + NFC
1500
Notes:
(1) Abbreviation for Minimum Order Quantity (MOQ). The standard MOQ for mass production is 1500
pieces, fewer only on customer demand. Samples for evaluation can be delivered at any quantity
via the distribution channels.
(2) Samples are available on customer demand.
20. ROHS AND REACH DECLARATION
Hereby we declare to our best present knowledge based on declaration of our suppliers that this product
follows the latest official RoHS and REACH Directive.
For the most updated one, please refer to [3].
21. DATA SHEET STATUS
This data sheet contains the final specification.
Panasonic reserves the right to make changes at any time without notice in order to improve design and
supply the best possible product.
Please consult the most recently issued data sheet before initiating or completing a design.
22. HISTORY FOR THIS DOCUMENT
Revision
Date
Modification / Remarks
0.1
November 2015
1st preliminary version.
0.2
January 2016
PIN Table correction.
0.3
February 2016
Minor changes.
0.6
23.08.2016
Bluetooth 4.1
0.7
3.11.2016
Changes in power supply values and conditions during measurement of output power and
sensitivity
1.0
January 2017
Final version
1.1
March 2017
Updated temperature range
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
PRODUCT SPECIFICATION
CLASS 2 BLUETOOTH LOW ENERGY + NFC
SINGLE MODE MODULE
CUSTOMER’S CODE
PANASONIC’S CODE
ENW89848A1KF
PAN1761
SUBJECT
No.
DS-1761-2400-102
REV.
1.1
PAGE
26 of 29
DATE
23.03.2017
23. RELATED DOCUMENTS
For an update, please search in the suitable homepage.
[1] PAN1761ETU Design-Guide
http://www.pideu.panasonic.de
[2] Application Note Land Grid Array
http://www.pideu.panasonic.de/pdf/184ext.pdf
[3] Toshiba Product Page – General information
http://toshiba.semicon-storage.com/eu/product/wireless-communication/bluetooth.html
[4] Toshiba SDK and Developer Zone
https://apps.toshiba.de/web/SDKRegistration/
[5] REACH and RoHS Certificate
http://www.pideu.panasonic.de/pdf/182ext2.jpg
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
PRODUCT SPECIFICATION
CLASS 2 BLUETOOTH LOW ENERGY + NFC
SINGLE MODE MODULE
CUSTOMER’S CODE
PANASONIC’S CODE
ENW89848A1KF
PAN1761
SUBJECT
No.
DS-1761-2400-102
REV.
1.1
PAGE
27 of 29
DATE
23.03.2017
24. RADIATION PATTERN OF ANTENNA
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
PRODUCT SPECIFICATION
CLASS 2 BLUETOOTH LOW ENERGY + NFC
SINGLE MODE MODULE
CUSTOMER’S CODE
PANASONIC’S CODE
ENW89848A1KF
PAN1761
SUBJECT
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
No.
DS-1761-2400-102
REV.
1.1
PAGE
28 of 29
DATE
23.03.2017
www.pideu.panasonic.de
CLASSIFICATION
PRODUCT SPECIFICATION
CLASS 2 BLUETOOTH LOW ENERGY + NFC
SINGLE MODE MODULE
CUSTOMER’S CODE
PANASONIC’S CODE
ENW89848A1KF
PAN1761
SUBJECT
No.
DS-1761-2400-102
REV.
1.1
PAGE
29 of 29
DATE
23.03.2017
25. GENERAL INFORMATION
© Panasonic Industrial Devices Europe GmbH 2012.
All rights reserved.
This product description does not lodge the claim to be complete and free of mistakes.
Please contact the related product manager in every case.
If we deliver ES samples to the customer, these samples have the status Engineering Samples.
This means, the design of this product is not yet concluded. Engineering Samples may be
partially or fully functional, and there may be differences to be published Data Sheet.
Engineering Samples are not qualified and are not to be used for reliability testing or series
production.
Disclaimer:
Customer acknowledges that samples may deviate from the Data Sheet and may bear defects
due to their status of development and the lack of qualification mentioned above.
Panasonic rejects any liability or product warranty for Engineering Samples. In particular,
Panasonic disclaims liability for damages caused by
 the use of the Engineering Sample other than for Evaluation Purposes, particularly the
installation or integration in an other product to be sold by Customer,
 deviation or lapse in function of Engineering Sample,
 improper use of Engineering Samples.
Panasonic disclaimes any liability for consequential and incidental damages.
In case of any questions, please contact your local sales partner or the related product
manager.
26. LIFE SUPPORT POLICY
This Panasonic product is not designed for use in life support appliances, devices, or systems
where malfunction can reasonably be expected to result in a significant personal injury to the
user, or as a critical component in any life support device or system whose failure to perform
can be reasonably expected to cause the failure of the life support device or system, or to affect
its safety or effectiveness. Panasonic customers using or selling these products for use in such
applications do so at their own risk and agree to fully indemnify Panasonic for any damages
resulting.
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 29
Language                        : de-DE
Tagged PDF                      : Yes
Title                           : TABLE OF CONTENTS
Author                          : hkaehler
Creator                         : Microsoft® Word 2010
Create Date                     : 2017:03:23 12:16:14+01:00
Modify Date                     : 2017:03:23 12:16:14+01:00
Producer                        : Microsoft® Word 2010

EXIF Metadata provided by EXIF.tools