Panasonic Devices Europe 2580 802.15.4-Modem PAN2580 User Manual TABLE OF CONTENTS

Download:
Mirror Download [FCC.gov]
Document ID	1604984
Application ID	fPRq+sc5ADlwnYwciQJQNw==
Document Description	15_PAN2580 UserMan
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	79.56kB (994542 bits)
Date Submitted	2011-12-19 00:00:00
Date Available	2011-12-19 00:00:00
Creation Date	2011-10-05 10:11:20
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2011-10-05 10:15:20
Document Title	TABLE OF CONTENTS
Document Creator	Acrobat PDFMaker 8.1 für Word
Document Author:	hkaehler

CLASSIFICATION
PRODUCT SPECIFICATION
SUBJECT
802.15.4-MODEM
CUSTOMER’S CODE
PAN2580
PANASONIC’S CODE
ENW59625xxxF
No.
DS-PAN2580-102
REV.
1.0
PAGE
1 of 31
DATE
07.09.2011
Product Specification
Applicant / Manufacturer
Hardware
Panasonic Electronic Devices Europe GmbH
Zeppelinstrasse 19
21337 Lüneburg
Germany
Synapse Wireless, Inc.
Applicant / Manufacturer
Software
Software Version
SNAP 2.4.20
Contents
Approval for Mass Production
Customer
By signing this document, you acknowledge that you are the legal representative for your
company and that you understand and accept the validity of the contents herein. Customer
acknowledges that engineering samples may deviate from this specification and may contain
defects due to their development status.
Panasonic rejects any liability or product warranty for engineering samples. In particular,
Panasonic disclaims liability for damages caused by
• the use of the engineering sample other than for evaluation purposes, particularly the
installation or integration in an other product to be sold by Customer,
• deviation or lapse in function of engineering sample,
• improper use of engineering samples.
Panasonic disclaimes any liability for consequential and incidental damages.
CHECKED / APPROVED:
DATE:
NAME:
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
EUROPE GmbH
SIGNATURE:
APPROVED
CHECKED
DESIGNED
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
802.15.4-MODEM
CUSTOMER’S CODE
PAN2580
PANASONIC’S CODE
ENW59625xxxF
No.
DS-PAN2580-102
REV.
1.0
PAGE
2 of 31
DATE
07.09.2011
TABLE OF CONTENTS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
Key Features................................................................................................................... 4
Applications for the Module............................................................................................. 4
Description for the Module .............................................................................................. 4
Scope of this Document .................................................................................................. 5
History for this Document................................................................................................ 5
Terminal Layout .............................................................................................................. 6
Block Diagram................................................................................................................. 9
7.1. PAN2580-868MHz................................................................................................. 9
7.2. PAN2580-915MHz................................................................................................. 9
Key Parts List ................................................................................................................ 10
Test Conditions ............................................................................................................. 10
Absolute Maximum Ratings .......................................................................................... 10
Operating Conditions .................................................................................................... 11
DC electrical characeristics........................................................................................... 11
A/D converter Characteristics ....................................................................................... 12
AC Electrical Characteristics......................................................................................... 13
Soldering Temperature - Time Profile (for reflow soldering) ......................................... 14
15.1. For lead solder..................................................................................................... 14
15.2. For lead free solder.............................................................................................. 14
Module Dimensions....................................................................................................... 15
FootPrint of the Module................................................................................................. 15
Laser marking ............................................................................................................... 16
Mechanical Requirements............................................................................................. 16
Recommended Land Pattern ........................................................................................ 17
Reliability Tests ............................................................................................................. 18
Cautions ........................................................................................................................ 18
22.1. Design Notes ....................................................................................................... 18
22.2. Installation Notes ................................................................................................. 19
22.3. Usage Conditions Notes ...................................................................................... 19
22.4. Storage Notes...................................................................................................... 20
22.5. Safety Cautions ................................................................................................... 20
22.6. Other cautions ..................................................................................................... 20
Packaging ..................................................................................................................... 22
23.1. Tape Dimension................................................................................................... 22
23.2. Packing in Tape ................................................................................................... 22
23.3. Component direction............................................................................................ 23
23.4. Reel Dimension ................................................................................................... 23
23.5. Label for Package................................................................................................ 24
23.6. Total Packing Handling........................................................................................ 25
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
www.pedeu.panasonic.de
CLASSIFICATION
SUBJECT
802.15.4-MODEM
CUSTOMER’S CODE
PAN2580
24.
25.
26.
27.
28.
29.
30.
31.
32.
PRODUCT SPECIFICATION
PANASONIC’S CODE
ENW59625xxxF
No.
DS-PAN2580-102
REV.
1.0
PAGE
3 of 31
DATE
07.09.2011
23.7. Cover tape reel strength ...................................................................................... 25
Ordering Information ..................................................................................................... 26
RoHS Declaration ......................................................................................................... 27
Data Sheet Status ......................................................................................................... 27
Regulatory Information.................................................................................................. 27
27.1. FCC Notice .......................................................................................................... 27
27.2. Caution ................................................................................................................ 27
27.3. Labeling Requirements........................................................................................ 28
27.4. Antenna Warning ................................................................................................. 28
27.5. Approved Antenna List ........................................................................................ 28
27.6. RF Exposure PAN2580 ....................................................................................... 28
Industry Canada Certification........................................................................................ 29
European R&TTE Declaration of Conformity ................................................................ 29
Related Documents....................................................................................................... 30
General Information ...................................................................................................... 30
Life Support Policy ........................................................................................................ 31
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
www.pedeu.panasonic.de
CLASSIFICATION
PRODUCT SPECIFICATION
SUBJECT
802.15.4-MODEM
CUSTOMER’S CODE
PAN2580
PANASONIC’S CODE
ENW59625xxxF
No.
DS-PAN2580-102
REV.
1.0
PAGE
4 of 31
DATE
07.09.2011
1. KEY FEATURES
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Small size SMD device (29.8mm x 19.0mm x 2.7mm)
3 antenna options: Single port 50Ω, ceramic antenna or plug
16 selectable Channels with 250 kbps RF raw data rate
Low power modes for increased battery life
High sensitivity: -97dBm typ. @ 250kbps & 1% Packet Error Rate
+18 dBm @ 915MHz or +13 dBm @ 868 MHz max. Pout
programmable over a 20 dB range
Low supply voltage (2.7 V to 3.6 V, 3.0 V typ.)
Operating temperature range -40°C to +85°C
192k total Flash with 64k used by SNAP core, 64k free for
unloadable SNAPpy scripts, and 64k reserved.
1 UART with HW Flow Control for control or transparent data
19 GPIOs and up to 18 A/D inputs with 10 Bit ADC for fast and
easy conversion from analog inputs -such as temperature,
pressure and fluid levels- to digital values.
GFSK Modulation with FHSS (Spreading Method) when using
SNAP®, otherwise also FSK and OOK is possible
Mesh (SNAP®) Mesh networking Topology with 16 Channels
Manufactured in conformance with RoHS
2. APPLICATIONS FOR THE MODULE
•
•
•
•
Automatic Meter Reading
Inventory management, Factory- and home automation
Wireless Sensor Networks, e.g. Lighting Control
Monitoring (environmental, patient or fitness)
3. DESCRIPTION FOR THE MODULE
The PAN2580 module is a short range, low power, 868MHZ or 915MHz ISM band transceiver
which includes a complete 802.15.4 physical layer (PHY). It is designed for the IEEE
802.15.4 wireless standard. Using an appropriate microcontroller (MCU) with reference
oscillator provides a cost effective solution for short range data links and networks.
The PAN2580 use the MCU with integrated Transceiver Si100x from Silicon Labs
It comes pre-loaded with the Synapse SNAP® mesh network operating system.
Please contact your local sales office for further details on additional options and services, by
visiting www.panasonic.com/rfmodules or write an e-mail to wireless@eu.panasonic.com.
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
www.pedeu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
802.15.4-MODEM
CUSTOMER’S CODE
PAN2580
PANASONIC’S CODE
ENW59625xxxF
No.
DS-PAN2580-102
REV.
1.0
PAGE
5 of 31
DATE
07.09.2011
4. SCOPE OF THIS DOCUMENT
This product specification applies to Panasonic’s 802.15.4 Modem PAN2580 //
ENW59625xxxF. Different versions of the PAN2580 are available (refer to chapter 24).
5. HISTORY FOR THIS DOCUMENT
Revision
Date
Modification / Remarks
1.0
07.09.2011
Initial draft version
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
www.pedeu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
802.15.4-MODEM
CUSTOMER’S CODE
PAN2580
PANASONIC’S CODE
ENW59625xxxF
No.
DS-PAN2580-102
REV.
1.0
PAGE
6 of 31
DATE
07.09.2011
6. TERMINAL LAYOUT
Pin
No.
A1
A2
A3
Pin
Name
GND
VCC
VCC
A4
P2.2
A5
P2.3
A6
P1.6
A7
P1.7
A8
GND
B1~B3 NC
B4
P2.1
Pin
Type
D I/O or
A In
D I/O or
A In
D I/O or
A In
Description
DC Power supply, 0V
DC Power supply, typical 3V (2.7 ~ 3.6V)
DC Power supply, typical 3V (2.7 ~ 3.6V)
GPIO_1, ADC18, I2C SCL
GPIO_2, ADC19
Not Available, Do Not Connect (used for access to the
onboard external memory)
Not Available, Do Not Connect (used for access to the
onboard external memory)
DC Power supply, 0V
GPIO_0, ADC17, I2C SDA
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
www.pedeu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
802.15.4-MODEM
CUSTOMER’S CODE
PAN2580
PANASONIC’S CODE
ENW59625xxxF
REV.
1.0
PAGE
7 of 31
DATE
07.09.2011
Pin
No.
Pin
Name
B5
P2.4
B6
P1.5
B7
P2.0
B8
C1 ~
C3
C4
GND
Not Available, Do Not Connect (used for access to the
onboard external memory)
Not Available, Do Not Connect (used for access to the
onboard external memory)
DC Power supply, 0V
NC
ANT_A
GPIO_18 (Output Only)
C5
P0.2_XTAL1
DO
D I/O or
A In
C6 ~
C7
C8
D1 ~
D7
D8
E1 ~
E2
Pin
Type
D I/O or
A In
No.
DS-PAN2580-102
Description
GPIO_3, ADC20
GPIO_9, ADC3, UART0 CTS Output
NC
GND
DC Power supply, 0V
NC
GND
DC Power supply, 0V
NC
E3
GPIO_0
D I/O or
A I/O
GPIO_0 (General Purpose I/O)
E4 ~
E7
NC
E8
RF IN/OUT
- or A I/O
EZRadioPRO peripheral transmit RF output / input pin
(only ENW59625CxDF, other modules NC)
F1 ~
F3
NC
F4
P0.0_VREF
D I/O or
A I/O
GPIO_6, ADC0, Interrupt, External Voltage Reference,
SPI MISO
NC
GND
NC
D I/O or
A In
DC Power supply, 0V
F5 ~
F7
F8
G1
G2
P2.5
G3
P0.3_XTAL1
G4
P0.5_RX
G5
P=0.6_CNVSTR
GPIO_4, ADC21, SPI MOSI
GPIO_9, ADC3, UART0 CTS Output
D I/O or
A I/O
D I/O or
A In
GPIO_7, ADC5, Interrupt, UART0 Rx Data Input
GPIO_15, ADC6, External “Start Conversion” for
ADC0
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
www.pedeu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
802.15.4-MODEM
CUSTOMER’S CODE
PAN2580
PANASONIC’S CODE
ENW59625xxxF
No.
DS-PAN2580-102
REV.
1.0
PAGE
8 of 31
DATE
07.09.2011
Pin
No.
G6 ~
G7
G8
H1
Pin
Name
Pin
Type
Description
NC
GND
GND
H2
P2.7_C2D
DC Power supply, 0V
DC Power supply, 0V
GPIO_16 (limited drive strength as it is routed through
a 1Kohm resistor. The signal driven from (or to)
GPIO16 can also be read, or driven, on pin H6, the
debug pin.
H3
P2.6
H4
P0.4_TX
H5
H6
H7
H8
RESET#_C2D
P2.7_C2D
NC
GND
D I/O or
A In
D I/O or
A In
D In
D I/O
GPIO_5, ADC22, SPI SCLK
GPIO_8, ADC4, Interrupt, UART0 Tx Data Output
Module Reset, Active Low
Background Debug Communications
DC Power supply, 0V
D = digital; A = analog; I = input; O = output; I/O = bidirectional; P = power; G = ground
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
www.pedeu.panasonic.de
CLASSIFICATION
SUBJECT
CUSTOMER’S CODE
PAN2580
PRODUCT SPECIFICATION
802.15.4-MODEM
PANASONIC’S CODE
ENW59625xxxF
No.
DS-PAN2580-102
REV.
1.0
PAGE
9 of 31
DATE
07.09.2011
7. BLOCK DIAGRAM
7.1. PAN2580-868MHZ
(ENW59625xxCF)
7.2. PAN2580-915MHZ
(ENW59625xxDF)
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
www.pedeu.panasonic.de
CLASSIFICATION
No.
DS-PAN2580-102
PRODUCT SPECIFICATION
SUBJECT
802.15.4-MODEM
CUSTOMER’S CODE
PAN2580
PANASONIC’S CODE
ENW59625xxxF
REV.
1.0
PAGE
10 of 31
DATE
07.09.2011
8. KEY PARTS LIST
Part Name
P.W.Board
Casing
IC part name
Material
Glass cloth epoxide resin with gold plating
Material: C7521, thickness 0.15mm
SI100x (SiLabs, www.silabs.com)
9. TEST CONDITIONS
Measurements are made under room temperature and humidity unless otherwise specified.
Temperature
25 ± 10°C
Humidity
40 to 85%RH
Supply voltage
3.0V
10. ABSOLUTE MAXIMUM RATINGS
The maximum ratings may not be exceeded under any circumstances, not even momentarily
and individually, as permanent damage to the module will result.
No.
Item
Symbol
Ambient Temperature under Bias
Storage Temperature
Supply voltage (1)
Voltage on any Px.x I/O Pin or RST with
Respect to GND
Maximum Total Current through
all Px.x Pins
ESD on any pin except for optional pins
E8 (RF in/out) and UFL connector.
Human Body Model (HBM)
ESD on optional pins E8 (RF in/out) and
UFL connector.
Human Body Model (HBM)
Surface Mount Solder Reflow
Temperature
Moisture Sensitivity Level
Top
Tstg
VCC
Vin
Absolute Maximum
Ratings
-40 to +85
-40 to +85
-0.3 to +3.6
-0.3 to VCC+0.5
Unit
°C
°C
Vdc
Vdc
Iin
200
mA
VTHHBM1
±2
kV
VTHHBM2
±1
kV
TDeath
MSL
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
Please refer to chapter
15.2.
3 (168 hours)
www.pedeu.panasonic.de
CLASSIFICATION
SUBJECT
No.
DS-PAN2580-102
PRODUCT SPECIFICATION
802.15.4-MODEM
CUSTOMER’S CODE
PAN2580
PANASONIC’S CODE
ENW59625xxxF
REV.
1.0
PAGE
11 of 31
DATE
07.09.2011
Notes:
(1) The supply voltage must be free of AC ripple voltage (for example from a battery or a low
noise regulator output). For noisy supply voltages, please provide a decoupling circuit (for
example a ferrite in series connection and a blocking capacitor to ground).
The exact ripple tolerance will be published in a later revision.
11. OPERATING CONDITIONS
No.
Item
Supply voltage
2.1
2.2
RF Frequency 915MHz
RF Frequency 868MHz (3)
Logic Low Level Input
Voltage
Logic High Level Input
Voltage
Operating temperature
range
Min
Value
Typ
Max
Unit
VCC
2.7
3.0
3.6
Vdc
fRF
fRF
902.0
868.1
927.6
868.5
MHz
MHz
VIL
0.6
VIH
VCC–
0.6
Top
-40
+85
°C
Condition / Remark Symbol
The typical value
is recommended
Input / Output
Input / Output
12. DC ELECTRICAL CHARACERISTICS
Assume VCC = 3.0V, Tamb = 25°C if nothing else stated
No.
Item
Condition /
Remark
Symbol
Transmit current consumption
Receive current consumption
Low power current consumption
in sleep mode.
Transmit Mode
Receive Mode
Mode 0(2)
Mode 1(2)
ICCT
ICCR
ICCSM0
ICCSM1
Min
Value
Typ
68
25
0.76
1.2
Max
90
30
Unit
mA
mA
µA
µA
Notes:
(2) For sleep-mode settings refer to the SNAP Reference Manual [3]
(3) In case, when SNAP Software from Synapse is used. Please ask the relevant Product
Manager in your region, in case you want to address a different band.
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
www.pedeu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
802.15.4-MODEM
CUSTOMER’S CODE
PAN2580
PANASONIC’S CODE
ENW59625xxxF
No.
DS-PAN2580-102
REV.
1.0
PAGE
12 of 31
DATE
07.09.2011
13. A/D CONVERTER CHARACTERISTICS
No.
Item
Condition / Remark
Min
Value
Typ
Max
Unit
DC Accuracy
Resolution
10
bits
Integral Nonlinearity
±0.5
±1
LSB
Differential Nonlinearity Guaranteed Monotonic
±0.5
±1
LSB
Offset Error
±<1
±2
LSB
Full Scale Error
±1
±2.5
LSB
Dynamic performance (10 kHz sine-wave single-ended input, 1 dB below Full Scale, 300 ksps)
Signal-to-Noise Plus
54
58
dB
Distortion
Signal-to-Distortion
73
dB
Spurious-Free Dynamic
75
dB
Range
Conversion Rate
SAR Conversion Clock
7.33
MHz
13
Conversion Time in SAR 10-bit Mode
clock
10
Clocks
8-bit Mode
11
Track/Hold Acquisition
11
1.5
μs
Time
12
Throughput Rate
300
ksps
Analog Inputs
ADC Input Voltage
13
Single Ended (AIN+ – GND) 0
VREF
Range
Absolute Pin Voltage
with respect
14
Single Ended
VCC
to GND
1x Gain
30
15
Sampling Capacitance
pF
0.5x Gain
28
Input Multiplexer
16
kΩ
Impedance
Power Specifications
Power Supply Current
Conversion Mode (300 ksps)
800
17
μA
(VDD supplied to
Tracking Mode (0 ksps)
680
ADC0)
67
Internal High Speed VREF
18
Power Supply Rejection
dB
External VREF
74
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
www.pedeu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
802.15.4-MODEM
CUSTOMER’S CODE
PAN2580
PANASONIC’S CODE
ENW59625xxxF
No.
DS-PAN2580-102
REV.
1.0
PAGE
13 of 31
DATE
07.09.2011
14. AC ELECTRICAL CHARACTERISTICS
No. Receiver
1.1
1.2
1.3
1.4
1.5
RX Sensitivity
Saturation
Frequency Error
Tolerance
Spurious Emissions
Image Rejection
RSSI Resolution
±1-Ch Offset
Selectivity
±2-Ch Offset
Selectivity
≥±3-Ch Offset
Selectivity
Blocking at 1 MHz
Offset
Blocking at 4 MHz
Offset
Blocking at 8 MHz
Offset
10
11
12
Min
Limit
Typ Max
-92
-95
tbd
tbd
tbd
tbd
dBm
±70
kHz
-54
dBm
-30
dB
±0.5
dB
Desired Ref Signal 3 dB above
sensitivity, BER < 0.1%. Interferer
and desired modulated with 40
kbps ΔF = 20 kHz GFSK with BT
= 0.5, channel spacing = 150 kHz -
-31
dB
-35
dB
-40
dB
-52
dB
-56
dB
-63
dB
Min
16
Limit
Typ
18
19
250
-50
-44
Max
20
-35
-35
-54
-54
Conditions
1% Packet Error Rate (PER),
-85dBm required by [1]
Wireless M-Bus Mode T1
Wireless M-Bus Mode T2
Wireless M-Bus Mode S1
Wireless M-Bus Mode S2
maximum input level
AFC on, 1% PER
Rejection at the image frequency.
IF=937 kHz
Desired Ref Signal 3 dB above
sensitivity. Interferer and desired
modulated with 40 kbps ΔF = 20
kHz GFSK with BT = 0.5
No. Transmitter
Output Power (max)
Power Control Range
Over the Air Data Rate
2nd harmonic
3rd harmonic
Spurious Emissions <1GHz
Spurious Emissions >1GHz
Conditions
Fixed by Synapse Software
maximum output power
maximum output power
POUT = 11 dBm
excluding harmonics
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
Unit
dBm
Unit
dBm
dB
kbps
dBm
dBm
dBm
dBm
www.pedeu.panasonic.de
CLASSIFICATION
PRODUCT SPECIFICATION
SUBJECT
802.15.4-MODEM
CUSTOMER’S CODE
PAN2580
PANASONIC’S CODE
ENW59625xxxF
No.
DS-PAN2580-102
REV.
1.0
PAGE
14 of 31
DATE
07.09.2011
15. SOLDERING TEMPERATURE - TIME PROFILE (FOR REFLOW SOLDERING)
15.1. FOR LEAD SOLDER
10 ±1s
Recommended temp. profile
for reflow soldering
30 +20/-10s
235°C max.
Temp.[°C]
220 ±5°C
200°C
150 ±10°C
90 ±30s
Time [s]
15.2. FOR LEAD FREE SOLDER
Our used temp. profile
for reflow soldering
Temp.[°C]
30 +20/-10s
230°C -250°C max.
220°C
150°C – 190°C
90 ±30s
Time [s]
Reflow permissible cycles:
Opposite side reflow is prohibited due to the module weight.
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
www.pedeu.panasonic.de
CLASSIFICATION
PRODUCT SPECIFICATION
SUBJECT
802.15.4-MODEM
CUSTOMER’S CODE
PAN2580
PANASONIC’S CODE
ENW59625xxxF
No.
DS-PAN2580-102
REV.
1.0
PAGE
15 of 31
DATE
07.09.2011
16. MODULE DIMENSIONS
No.
Item
Dimension
Tolerance
Remark
Width
Lenght
Height
19.00
29.80
2.60
± 0.25
± 0.25
± 0.25
With case
1.10
19.00
2.40
17. FOOTPRINT OF THE MODULE
All dimensions are in millimeters.
The outer dimensions have a tolerance of ± 0.25mm.
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
www.pedeu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
802.15.4-MODEM
CUSTOMER’S CODE
PAN2580
PANASONIC’S CODE
ENW59625xxxF
No.
DS-PAN2580-102
REV.
1.0
PAGE
16 of 31
DATE
07.09.2011
18. LASER MARKING
The 2D-Barcode contains the following information separated by a semicolon:
Value
Date-code
MAC-adress
59625xxx
yyzz
Description
Date code in the format Year - Calender Week - Day of Week – Line Lot [YYWWDLL]
Last 8 digits of the MAC-adress
Ordering number [8 signs; without the first 3 digits (ENW) and the last
digit (F), please refer also to chapter 24]
The identifier for the hardware release [2 signs, here yy]
and the software release [2 signs, here zz]
The point on the marking (below left) is the identifier for pin 1 of the module.
19. MECHANICAL REQUIREMENTS
No.
Item
Limit
Solderability
More than 75% of the soldering area
shall be coated by solder
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
Condition
Reflow soldering with
recommendable
temperature profile
www.pedeu.panasonic.de
CLASSIFICATION
No.
DS-PAN2580-102
PRODUCT SPECIFICATION
SUBJECT
802.15.4-MODEM
CUSTOMER’S CODE
PAN2580
PANASONIC’S CODE
ENW59625xxxF
REV.
1.0
PAGE
17 of 31
DATE
07.09.2011
19.00
min.
8mm
1.10
14,00
2.40
20. RECOMMENDED LAND PATTERN
Dimensions in millimeters.
The land pattern dimensions above are meant to serve only as a guid. This information is
provided without any legal liability.
For the footprint it is recommended to use the same pad-size like the module footprint.
Please refer to chapter 17. Foot Print of the Module.
Also for the solder paste screen we recommend to use the same pad-size like for the module.
Solder paste screen cutouts (with slightly different dimensions) might be optimum depending
on your soldering process. For example, the chosen solder paste screen thickness might
have an effect. The solder screen thickness depends on your production standard. We
recommend 100µm to 120µm.
When using the antenna pad version, place the antenna on the edge of your carrier board (if
allowable).
If you have any questions on these points, please contact your local Panasonic
representative.
Before releasing the layout, we recommend to sent the schematic and layout for final check
to wireless@eu.panasonic.com.
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
www.pedeu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
802.15.4-MODEM
CUSTOMER’S CODE
PAN2580
PANASONIC’S CODE
ENW59625xxxF
No.
DS-PAN2580-102
REV.
1.0
PAGE
18 of 31
DATE
07.09.2011
21. RELIABILITY TESTS
The measurement should be done after being exposed to room temperature and humidity for
1 hour.
No.
Item
Limit
Condition
Temperature:125°C to -50°C
Voltage: off
Heat-shockElectrical parameter
Period: 500cycles
restance test
should be in specification
Temp. Cycle: -50°C and +125°C each
7min.
Temprerature: +85°C
Humidity: 85%
Humidity load life
the same as above
test
Period: 500hrs
Voltage: on
Vibration Ampl.: 1.5mm
Vibration test
the same as above
Vibr. Freq.: 10~55~10Hz (total 1min.)
Directions: X; Y; Z each 1hrs
Regarding JEDEC JESD-22a114D each
ESD test
the same as above
contact with 100pF, 1.5kOhm min. 2kV
(Human Body Model HBM)
Pre conditioning:
Temperature: +85°V
Humidity: 85°C
MSL test
the same as above
Period: 96hrs
Soldering condition:
Peak: 260°C for ~10s
2 times
22. CAUTIONS
Failure to do so may result in degrading of the product’s functions and damage to the
product.
22.1. DESIGN NOTES
(1)
(2)
(3)
(4)
Please follow the conditions written in this specification, especially the control
signals of this module.
The supply voltage has to be free of AC ripple voltage (for example from a
battery or a low noise regulator output). For noisy supply voltages, provide a
decoupling circuit (for example a ferrite in series connection and a blocking
capacitor to ground of at least 47uF directly at the module).
This product should not be mechanically stressed when installed.
Heat is the major cause of shortening the life of these products. Please keep
this product away from heat.
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
www.pedeu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
802.15.4-MODEM
CUSTOMER’S CODE
PAN2580
(5)
(6)
PANASONIC’S CODE
ENW59625xxxF
No.
DS-PAN2580-102
REV.
1.0
PAGE
19 of 31
DATE
07.09.2011
Avoid assembly and use of the target equipment in conditions where the
products' temperature may exceed the maximum tolerance.
The supply voltage should not be exceedingly high or reversed. It should not
carry noise and/or spikes.
Please keep this product away from other high frequency circuits.
22.2. INSTALLATION NOTES
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
Reflow soldering is possible twice based on the conditions in chapter 15.
Please set up the temperature at the soldering portion of this product
according to this reflow profile.
Carefully position the products so that their heat will not burn into printed
circuit boards or affect the other components that are susceptible to heat.
Carefully locate these products so that their temperatures will not increase
due to the effects of heat generated by neighboring components.
If a vinyl-covered wire comes into contact with the products, then the cover
will melt and generate toxic gas, damaging the insulation. Never allow contact
between the cover and these products to occur.
This product should not be mechanically stressed or vibrated when reflowed.
If you want to repair your board by hand soldering, please keep the
conditions of this chapter.
Please do not wash this product.
Please refer to the recommended pattern when designing a board.
Pressing on parts of the metal cover or fastening objects to the metal will
cause damage to the unit.
22.3. USAGE CONDITIONS NOTES
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Please take measures to protect the unit against static electricity.
If pulses or other transient loads (a large load applied in a short time) are
applied to the products, check and evaluate their operation befor assembly
on the final products.
Please do not use dropped products.
Please do not touch, damage or place dirt on the pins.
Please follow the recommended condition ratings about the power supply
applied to this product.
Electrode peeling strength: Do not add pressure of more than 4.9N when
soldered on PCB.
Pressing on parts of the metal cover or fastening objects to the metal cover
will cause damage.
These products are intended for general purpose and standard use in general
electronic equipment, such as home appliances, office equipment,
information and communication equipment.
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
www.pedeu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
802.15.4-MODEM
CUSTOMER’S CODE
PAN2580
PANASONIC’S CODE
ENW59625xxxF
No.
DS-PAN2580-102
REV.
1.0
PAGE
20 of 31
DATE
07.09.2011
22.4. STORAGE NOTES
(1)
(2)
The module may not be stressed mechanically during storage.
Do not store these products in the following conditions or the performance
characteristics of the product, such as RF performance will be adversely
affected:
(3) Storage in salty air or in an environment with a high concentration of corrosive
gas, such as Cl2, H2S, NH3, SO2, or NOX
(4) Storage in direct sunlight
(5) Storage in an environment where the temperature may be outside the range of
5°C to 35°C range, or where the humidity may be outside the 45 to 85% range.
(6) Storage of the products for more than one year after the date of delivery at your
company if the avoidance all the above conditions (1) to (3) have been met.
(7) Storage period: Please check the adhesive strength of the embossed tape
and soldering after 6 months of storage.
(8) Please keep this product away from water, poisonous gas and corrosive gas.
(9) This product should not be stressed or shocked when transported.
(10) Please follow the specification when stacking packed crates (max. 10).
22.5. SAFETY CAUTIONS
These specifications are intended to preserve the quality assurance of products and
individual components.
Before use, check and evaluate the operation when mounted on your products. Abide
by these specifications, without deviation when using the products. These products may
short-circuit. If electrical shocks, smoke, fire, and/or accidents involving human life are
anticipated when a short circuit occurs, then provide the following failsafe functions, as a
minimum.
(1) Ensure the safety of the whole system by installing a protection circuit and a
protection device.
(2) Ensure the safety of the whole system by installing a redundant circuit or
another system to prevent a single fault causing an unsafe status.
22.6. OTHER CAUTIONS
(1)
(2)
(3)
(4)
(5)
(6)
This specification sheet is copyrighted. Please do not disclose it to a third
party.
Please do not use the products for other purposes than those listed.
Be sure to provide an appropriate fail-safe function on your product to prevent
an additional damage that may be caused by the abnormal function or the
failure of the product.
This product has not been manufactured with any ozone chemical controlled
under the Montreal Protocol.
These products are not intended for other uses, other than under the special
conditions shown below. Before using these products under such special
conditions, check their performance and reliability under the said special
conditions carefully to determine whether or not they can be used in such a
manner.
In liquid, such as water, salt water, oil, alkali, or organic solvent, or in places
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
www.pedeu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
802.15.4-MODEM
CUSTOMER’S CODE
PAN2580
PANASONIC’S CODE
ENW59625xxxF
No.
DS-PAN2580-102
REV.
1.0
PAGE
21 of 31
DATE
07.09.2011
where liquid may splash.
In direct sunlight, outdoors, or in a dusty environment
In an environment where condensation occurs.
In an environment with a high concentration of harmful gas (e.g. salty air, HCl,
Cl2, SO2, H2S, NH3, and NOX)
(10) If an abnormal voltage is applied due to a problem occurring in other
components or circuits, replace these products with new products because
they may not be able to provide normal performance even if their electronic
characteristics and appearances appear satisfactory.
(11) When you have any question or uncertainty, both of you and Panasonic
sincerely cope with it.
(7)
(8)
(9)
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
www.pedeu.panasonic.de
CLASSIFICATION
No.
DS-PAN2580-102
PRODUCT SPECIFICATION
SUBJECT
802.15.4-MODEM
CUSTOMER’S CODE
PAN2580
PANASONIC’S CODE
ENW59625xxxF
REV.
1.0
PAGE
22 of 31
DATE
07.09.2011
23. PACKAGING
23.1. TAPE DIMENSION
0.35 ± 0.05
Do
Ø 1.55 ± 0.05
P2
2.00 ± 0.15 (I)
E1
1.75 ± 0.10
Po
4.00 ± 0.10 (II)
D1
Ø 2.00 min.
F (III)
So
Bo
Typ. R
K1
0.30
R 0.75
0.20 ± 0.05
Ko
P1
Ao
SECTIONY-Y
SCALE 1.45 : 1
DETAIL A
SCALE 6 : 1
Ao
Bo
Ko
K1
P1
So
19.40
30.20
3.80
2.95
20.20
28.00
40.40
44.00
+/- 0.10
+/- 0.10
+/- 0.20
+/- 0.10
+/- 0.15
+/- 0.10
+/- 0.10
+/- 0.30
(I)
(II)
(III)
Forming format : Flatbed - 8
Estimated max. length : 50
(IV)
meter/22B6 reel
Measured from centreline of sprocket hole
to centreline of pocket.
Cumulative tolerance of 10 sprocket
holes is ± 0.20 .
Measured from centreline of sprocket
hole to centreline of pocket.
Other material available.
ALL DIMENSIONS IN MILLIMETRES UNLESS OTHERWISE STATED.
23.2. PACKING IN TAPE
trailer (empty)
1 x circumference /hub
(min 160mm)
component
packed area
standard
500pcs
leader (empty)
minimum 10 pitch
Top cover tape more
than 1 x circumference
plus 100mm to avoid
fixing of tape end on
sealed modules.
Empty spaces in component packed area shall be less than two per reel and those
spaces shall not be consecutive.
Top cover tape shall not be found on reel holes and shall not stick out from reel.
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
www.pedeu.panasonic.de
CLASSIFICATION
SUBJECT
CUSTOMER’S CODE
PAN2580
PRODUCT SPECIFICATION
802.15.4-MODEM
PANASONIC’S CODE
ENW59625xxxF
No.
DS-PAN2580-102
REV.
1.0
PAGE
23 of 31
DATE
07.09.2011
23.3. COMPONENT DIRECTION
Please refer also to chapter 18. Labeling Drawing
23.4. REEL DIMENSION
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
www.pedeu.panasonic.de
CLASSIFICATION
PRODUCT SPECIFICATION
SUBJECT
802.15.4-MODEM
CUSTOMER’S CODE
PAN2580
PANASONIC’S CODE
ENW59625xxxF
No.
DS-PAN2580-102
REV.
1.0
PAGE
24 of 31
DATE
07.09.2011
23.5. LABEL FOR PACKAGE
The label below shows only an example.
(3P):PAN2580
Customer Code
ENW59625xxxF
500
(1T):
(1P)
(2P)
(3P)
(9D)
(Q)
(HW/SW)
[[G]]
Lotcode [YYWWDLL]
YY
year
above 08
WW normal calendar week
above 01
day
above 5 (Friday)
line identifier, if more as one
actual 1
lot identifier per day
e.g. 1, 2, 3
Customer Order Code, if any, otherwise put company name on it.
Panasonic Part Number, please refer to chapter 24 Ordering Information
Module type
Datecode as [2xYear, 2xMonth, 2xDay]
Quantity [XXXX], variable
Hardware /Software Release identifier
Identifier that the product is RoHS conform, please refer to chapter 25.
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
www.pedeu.panasonic.de
CLASSIFICATION
SUBJECT
CUSTOMER’S CODE
PAN2580
PRODUCT SPECIFICATION
802.15.4-MODEM
PANASONIC’S CODE
ENW59625xxxF
No.
DS-PAN2580-102
REV.
1.0
PAGE
25 of 31
DATE
07.09.2011
23.6. TOTAL PACKING HANDLING
23.7. COVER TAPE REEL STRENGTH
Force direction
θ = 10deg
Speed = 300mm/min.
Cover tape reel strength
=0.098~0.68N (10~70g)
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
www.pedeu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
802.15.4-MODEM
CUSTOMER’S CODE
PAN2580
PANASONIC’S CODE
ENW59625xxxF
No.
DS-PAN2580-102
REV.
1.0
PAGE
26 of 31
DATE
07.09.2011
24. ORDERING INFORMATION
No.
Ordering part
number
ENW59625A5CF
ENW59625B5CF
ENW59625C5CF
ENW59625A5DF
ENW59625B5DF
ENW59625C5DF
Description
Engineering Sample PAN2580 – 868MHz
802.15.4 Mesh Network Module, which includes Ceramic Antenna
and 192kbyte Flash Memory, with 64kbyte used by SNAP core,
64kbyte free for uploadable SNAPpy scripts and 64k reserved
Synapse SNAP software included, please refer also to [3].
Engineering Sample PAN2580 – 868MHz
802.15.4 Mesh Network Module, which includes UFL
connectorand 192kbyte Flash Memory, with 64kbyte used by
SNAP core, 64kbyte free for uploadable SNAPpy scripts and 64k
reserved
Synapse SNAP software included, please refer also to [3].
Engineering Sample PAN2580 – 868MHz
802.15.4 Mesh Network Module, which includes RF out on SMD
pad and 192kbyte Flash Memory, with 64kbyte used by SNAP
core, 64kbyte free for uploadable SNAPpy scripts and 64k
reserved
Synapse SNAP software included, please refer also to [3].
Engineering Sample PAN2580 – 915MHz
802.15.4 Mesh Network Module, which includes Ceramic Antenna
and 192kbyte Flash Memory, with 64kbyte used by SNAP core,
64kbyte free for uploadable SNAPpy scripts and 64k reserved
Synapse SNAP software included, please refer also to [3].
Engineering Sample PAN2580 - 915MHz
802.15.4 Mesh Network Module, which includes UFL
connectorand 192kbyte Flash Memory, with 64kbyte used by
SNAP core, 64kbyte free for uploadable SNAPpy scripts and 64k
reserved
Synapse SNAP software included, please refer also to [3].
Engineering Sample PAN2580 - 915MHz
802.15.4 Mesh Network Module, which includes RF out on SMD
pad and 192kbyte Flash Memory, with 64kbyte used by SNAP
core, 64kbyte free for uploadable SNAPpy scripts and 64k
reserved
Synapse SNAP software included, please refer also to [3].
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
www.pedeu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
802.15.4-MODEM
CUSTOMER’S CODE
PAN2580
PANASONIC’S CODE
ENW59625xxxF
No.
DS-PAN2580-102
REV.
1.0
PAGE
27 of 31
DATE
07.09.2011
25. ROHS DECLARATION
Declaration of environmental compatibility for supplied products:
Hereby we declare to our best present knowledge based on declaration of our suppliers that
this product does not contain the following substances which are banned by Directive
2002/95/EC (RoHS) or contains a maximum concentration of 0.1% by weight in
homogeneous materials for
•
•
•
•
•
Lead and lead compounds
Mercury and mercury compounds
Chromium (VI)
PBB (polybrominated biphenyl) category
PBDE (polybrominated biphenyl ether) category
And a maximum concentration of 0.01% by weight in homogeneous materials for
•
Cadmium and cadmium compounds
26. DATA SHEET STATUS
This data sheet contains data from the PRELIMINARY specification. Supplementary data will
be published at a later date. Panasonic Electronic Devices Europe GmbH reserves the right
to change the specification without notice, in order to improve the design and supply the best
possible product.
Please consult the most recently issued data sheet before initiating or completing a design.
If there is an update, please download under: PAN2580 Latest Data Sheet!
27. REGULATORY INFORMATION
27.1. FCC NOTICE
The device PAN2580, including the ceramic antenna (ENW59625AxDF) and also the
SMD type (ENW59625CxDF), including with the antennas, which are listed in 27.5,
complies with Part 15 of the FCC Rules.
The device meets the requirements for modular transmitter approval as detailed in FCC
public Notice DA00-1407.transmitter Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation.
27.2. CAUTION
The FCC requires the user to be notified that any changes or modifications made to this
device that are not expressly approved by Panasonic Electronic Devices Europe GmbH
may void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
www.pedeu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
802.15.4-MODEM
CUSTOMER’S CODE
PAN2580
PANASONIC’S CODE
ENW59625xxxF
No.
DS-PAN2580-102
REV.
1.0
PAGE
28 of 31
DATE
07.09.2011
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
27.3. LABELING REQUIREMENTS
The Original Equipment Manufacturer (OEM) must ensure that FCC labeling
requirements are met. This includes a clearly visible label (laser marking) on the outside
of the OEM enclosure specifying the appropriate Panasonic FCC identifier for this
product as well as the FCC Notice above. The FCC identifier is FCC ID: T7V-2580.
In any case end product must be labelled exterior with "Contains FCC ID: T7V-2580"
27.4. ANTENNA WARNING
The related part number for this device is ENW59625BxDF (PAN2580 with U.FL
connector) and ENW59625CxDF (PAN2580 with SMD pad). For details, please see the
chapter 24. Ordering Information. This device is tested with a standard SMA connector
and with the antennas listed below. When integrated in the OEMs product, these fixed
antennas require installation preventing end-users from replacing them with nonapproved antennas. Any antenna not in the following table must be tested to comply
with FCC Section 15.203 for unique antenna connectors and Section 15.247 for
emissions. The FCC identifier for this device with the antenna listed in item 1 are the
same (FCC ID: T7V-2580).
27.5. APPROVED ANTENNA LIST
Note: We are able to qualify your antenna and will add to this list as that process is completed.
Item
Part
Number
Manufacturer
Frequency
Band
Type
Gain
(dBi)
27.6. RF EXPOSURE PAN2580
To comply with FCC RF Exposure requirements, the Original Equipment Manufacturer
(OEM) must ensure that the approved antenna in the previous table must be installed.
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
www.pedeu.panasonic.de
CLASSIFICATION
SUBJECT
CUSTOMER’S CODE
PAN2580
PRODUCT SPECIFICATION
802.15.4-MODEM
PANASONIC’S CODE
ENW59625xxxF
No.
DS-PAN2580-102
REV.
1.0
PAGE
29 of 31
DATE
07.09.2011
The preceding statement must be included as a CAUTION statement in manuals for
products operating with the approved antennas in the previous table to alert users on
FCC RF Exposure compliance.
Any notification to the end user of installation or removal instructions about the
integrated radio module is not allowed.
The radiated output power of PAN2580 with mounted ceramic antenna
(FCC ID: T7V-2580) is below the FCC radio frequency exposure limits. Nevertheless,
the PAN2580 shall be used in such a manner that the potential for human contact
during normal operation is minimized.
End users may not be provided with the module installation instructions. OEM
integrators and end users must be provided with transmitter operating conditions for
satisfying RF exposure compliance.
28. INDUSTRY CANADA CERTIFICATION
PAN2580 is licensed to meet the regulatory requirements of Industry Canada (IC), license:
IC: 216Q-2580
Manufacturers of mobile, fixed or portable devices incorporating this module are advised to
clarify any regulatory questions and ensure compliance for SAR and/or RF exposure limits.
Users can obtain Canadian information on RF exposure and compliance from
www.ic.gc.ca.
This device has been designed to operate with the antennas listed in Table 27.5 above.
Antennas not included in this list are strictly prohibited for use with this device. The
required antenna impedance is 50 ohms. The antenna used for this transmitter must not be
co-located or operating in conjunction with any other antenna or transmitter.
29. EUROPEAN R&TTE DECLARATION OF CONFORMITY
Hereby, Panasonic Electronic Devices Europe GmbH, declares that the module PAN2580
and their versions is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC. As a result of the conformity assessment procedure
described in Annex III of the Directive 1999/5/EC, the end-customer equipment should be
labelled as follows:
PAN2580 and their versions in the specified reference design can be used in the following
countries: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, The Netherlands, the United Kingdom,
Switzerland, and Norway.
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
www.pedeu.panasonic.de
CLASSIFICATION
PRODUCT SPECIFICATION
SUBJECT
802.15.4-MODEM
CUSTOMER’S CODE
PAN2580
PANASONIC’S CODE
ENW59625xxxF
No.
DS-PAN2580-102
REV.
1.0
PAGE
30 of 31
DATE
07.09.2011
30. RELATED DOCUMENTS
For an update, please search in the suitable homepage.
[1]
IEEE Standard 802.15.4 –2003 Wireless Medium Access Control (MAC) and Physical
Layer (PHY) Specifications for Low-Rate Wireless Personal Area Networks (LRWPANs)
[2]
Technical Datasheet Si1000/1/2/3/4/5 Rev. 1.0 9/10
You can download the latest datasheet from the SiLabs homepage here.
[3]
Manual to the Evaluation Kit from Synapse, which fits to module hardware from
Panasonic [Downloads: SNAP® Reference Manual Updated 10/2/2008; SNAP
Hardware Technical Manual Updated 10/2/2008]
Each new release from Synapse, will be posted here. Be sure to be registered free
under http://forums.synapse-wireless.com.
31. GENERAL INFORMATION
© Panasonic Electronic Devices Europe GmbH 2009.
All rights reserved.
This product description does not claim to be complete and free of mistakes.
Please contact the related product manager with any errata inquries.
If we deliver samples to the customer, these samples have the status Engineering
Samples. This means, the design of this product is not yet completed. Engineering
Samples may be partially or fully functional, and there may be differences published in the
Data Sheet.
Engineering Samples are not qualified and are not to be used for reliability testing or series
production.
Disclaimer:
Customer acknowledges that samples may deviate from the Data Sheet and may bear
defects due to their status of development and the lack of qualification mentioned above.
Panasonic Electronic Devices Europe GmbH disclaims any liability or product warranty for
Engineering Samples. In particular, Panasonic Electronic Devices Europe GmbH disclaims
liability for damages caused by
• the use of the Engineering Sample other than for Evaluation Purposes, particularly the
installation or integration in an other product to be sold by Customer,
• deviation or lapse in function of Engineering Sample,
• improper use of Engineering Samples.
Panasonic Electronic Devices Europe GmbH disclaimes any liability for consequential and
incidental damages. In case of any questions, please contact your local sales partner or
the related product manager.
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
www.pedeu.panasonic.de
CLASSIFICATION
PRODUCT SPECIFICATION
SUBJECT
CUSTOMER’S CODE
PAN2580
802.15.4-MODEM
PANASONIC’S CODE
ENW59625xxxF
No.
DS-PAN2580-102
REV.
1.0
PAGE
31 of 31
DATE
07.09.2011
32. LIFE SUPPORT POLICY
This Panasonic Electronic Devices Europe GmbH product is not designed for use in life
support appliances, devices, or systems where malfunction can reasonably be expected to
result in a significant personal injury to the user, or as a critical component in any life
support device or system whose failure to perform can be reasonably expected to cause
the failure of the life support device or system, or to affect its safety or effectiveness.
Customers using or selling these products for use in such applications do so at their own
risk and agree to fully indemnify Panasonic Electronic Devices Europe GmbH for any
damages resulting.
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
www.pedeu.panasonic.de

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2011:10:05 10:11:20+02:00
Creator Tool                    : Acrobat PDFMaker 8.1 für Word
Modify Date                     : 2011:10:05 10:15:20+02:00
Metadata Date                   : 2011:10:05 10:15:20+02:00
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Format                          : application/pdf
Creator                         : hkaehler
Title                           : TABLE OF CONTENTS
Document ID                     : uuid:1133d249-a5a9-4343-ace6-d11c28109e57
Instance ID                     : uuid:7479e5a3-7292-40eb-9d6c-a3a5cc2b4e9d
Company                         : ECOM-LG
Source Modified                 : D:20110915122122
Page Count                      : 31
Page Layout                     : OneColumn
Author                          : hkaehler

EXIF Metadata provided by EXIF.tools