Panasonic Devices Europe EM250A ZigBee module PAN4570 / ETRX2 User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	690599
Application ID	TUp4jQ8oH/WaxGO83/49Og==
Document Description	user manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	108.5kB (1356286 bits)
Date Submitted	2006-08-07 00:00:00
Date Available	2006-08-04 00:00:00
Creation Date	2006-08-01 19:18:39
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2006-08-01 21:20:17
Document Title	1
Document Creator	Acrobat PDFMaker 5.0 für Word
Document Author:	Schoss

CLASSIFICATION
PRODUCT SPECIFICATION
Einstufung
Produktspezifikation
SUBJECT
MODEM FOR IEEE802.15.4 (ZIGBEE)
Thema
“ZigBee” Modem“ (IEEE802.15.4)
CUSTOMER’S CODE
PANASONIC’S CODE
ETRX2
ENWC9A0xyzE
No.
REV.
DS-ETR2-2400-102
PAGE
Seite
1 of 29
DATE
01.08.2006
Datum
Application for Production
Applicant / Manufacturer
Hardware
Panasonic Electronic Devices (Europe) GmbH
Zeppelinstrasse 19
21337 Lüneburg
Germany
Applicant / Manufacturer
Software
Ember Inc.
Telegesis (UK) Limited
Contents
Approval for Mass Production
Customer
Telegesis (UK) Limited
CHECKED / APPROVED:
DATE:
NAME:
SIGNATURE:
NOTE:
AT LEAST ONE SET OF APPROVED SPECIFICATIONS SHOULD BE RETURNED TO
THE ADDRESS OF THE ISSUING PARTY.
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
CLASSIFICATION
PRODUCT SPECIFICATION
Einstufung
Produktspezifikation
SUBJECT
MODEM FOR IEEE802.15.4 (ZIGBEE)
Thema
“ZigBee” Modem“ (IEEE802.15.4)
CUSTOMER’S CODE
PANASONIC’S CODE
ETRX2
ENWC9A0xyzE
No.
REV.
DS-ETR2-2400-102
PAGE
Seite
2 of 29
DATE
01.08.2006
Datum
TABLE OF CONTENTS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
Key Features ...................................................................................................................4
Applications for the Module .............................................................................................4
Description of the Module................................................................................................5
3.1. On board DC Regulator .........................................................................................5
3.2. On Board reference Crystal ...................................................................................5
Scope of this Document ..................................................................................................6
History for this Document ................................................................................................6
Terminal Layout...............................................................................................................7
Block Diagram ...............................................................................................................10
Key Parts List ................................................................................................................10
Test Conditions .............................................................................................................10
Absolute Maximum Ratings...........................................................................................11
Operating Conditions.....................................................................................................11
DC Electrical Characteristics.........................................................................................12
A/D converter Characteristics........................................................................................13
AC Electrical Characteristics .........................................................................................13
Mechanical Requirements.............................................................................................15
Soldering Temperature-time profile (for reflow soldering) .............................................16
16.1. For lead solder .....................................................................................................16
16.2. For lead free solder ..............................................................................................16
Module Dimensions.......................................................................................................17
Foot Print of the Module ................................................................................................17
Labeling Drawing...........................................................................................................18
Recommended Land Pattern ........................................................................................18
Software ........................................................................................................................19
21.1. Software Declaration............................................................................................19
21.2. Software Tools .....................................................................................................19
21.3. Ember ZigBeeTM Stack.........................................................................................20
Reliability Tests .............................................................................................................20
Application Notes ..........................................................................................................20
23.1. Cautions for safety ...............................................................................................20
23.2. Design engineering notes ....................................................................................21
23.3. Storage conditions ...............................................................................................22
Packaging......................................................................................................................23
24.1. Embossed tape / Blistergurt .................................................................................23
24.2. Component direction............................................................................................24
24.3. Reel dimension ....................................................................................................24
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
CLASSIFICATION
PRODUCT SPECIFICATION
Einstufung
Produktspezifikation
SUBJECT
MODEM FOR IEEE802.15.4 (ZIGBEE)
Thema
“ZigBee” Modem“ (IEEE802.15.4)
CUSTOMER’S CODE
PANASONIC’S CODE
ETRX2
ENWC9A0xyzE
25.
26.
27.
28.
29.
30.
31.
No.
REV.
DS-ETR2-2400-102
PAGE
Seite
3 of 29
DATE
01.08.2006
Datum
24.4. Package ...............................................................................................................25
Ordering Information .....................................................................................................26
RoHS Declaration..........................................................................................................27
Data Sheet Status .........................................................................................................27
Regulatory Information ..................................................................................................28
28.1. FCC Notice ..........................................................................................................28
28.2. Caution.................................................................................................................28
28.3. Labeling Requirements ........................................................................................28
28.4. Antenna Warning .................................................................................................29
28.5. Approved Antenna List.........................................................................................29
28.6. RF Exposure ETRX2 ...........................................................................................29
Related Documents.......................................................................................................30
General Information.......................................................................................................31
Life Support Policy ........................................................................................................31
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
CLASSIFICATION
PRODUCT SPECIFICATION
Einstufung
Produktspezifikation
SUBJECT
MODEM FOR IEEE802.15.4 (ZIGBEE)
Thema
“ZigBee” Modem“ (IEEE802.15.4)
CUSTOMER’S CODE
PANASONIC’S CODE
ETRX2
ENWC9A0xyzE
1.
No.
REV.
DS-ETR2-2400-102
PAGE
Seite
4 of 29
DATE
01.08.2006
Datum
KEY FEATURES
Schlüsseleigenschaften
• short range 2,4GHz ISM band IEEE802.15.4 [1] compliant transceiver
• Complete system based on the ZigBeeTM compliant platform EM250 that combines the
transceiver with a powerful, efficient industry proven 16-bit microprocessor with
comprehensive hardware supported network-level debugging features
• designed specifically for use with EmberZNet, Embers ZigBee compliant embedded mesh
networking
• powerful 16-bit microprocessor
• 128k flash ROM and 5k of SRAM memory
• high Rx sensitivity of –97dBm at 1% Packet Error Rate
• 3dBm Tx maximum output power with power control over 20dB range
• Small size 20,5mm x 37,5mm x 2.8mm
• single port antenna terminal (pcb pad, U.FL socket or chip antenna versions available)
• Integrated ADC module with 12-bit resolution
• two 16-bit general purpose timers; one 16-bit sleep timer
• 17 GPIO pins with alternate functions
• two sleep modes for increased battery life
• low voltage detect/reset
• complies with ETSI EN300328 and FCC part15
2.
APPLICATIONS FOR THE MODULE
Anwendungen für das Modul
• ZigBeeTM FFD (full functional) and RFD (reduced functional) devices working in star and
mesh networks
• Wireless sensor and actuator networks
• Remote control and wire replacement in industrial systems
• Building automation and control
• Inventory and logistics management
• HID (Human Interface Devices)
• Toys
• Home gateways
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
CLASSIFICATION
PRODUCT SPECIFICATION
Einstufung
Produktspezifikation
SUBJECT
MODEM FOR IEEE802.15.4 (ZIGBEE)
Thema
“ZigBee” Modem“ (IEEE802.15.4)
CUSTOMER’S CODE
PANASONIC’S CODE
ETRX2
ENWC9A0xyzE
3.
No.
REV.
DS-ETR2-2400-102
PAGE
Seite
5 of 29
DATE
01.08.2006
Datum
DESCRIPTION OF THE MODULE
Beschreibung des Moduls
ETRX2 contains the single chip EM250 [2] from Ember Inc., a 24MHz reference crystal and RF
frontend circuitry optimized for best RF performance. As single ended RF output the module is
available with integrated antenna or 50ohms or U.FL male socket [3] or 50 ohms pad terminal on
the bottom of the module.
Two additional hardware options are available on request:
3.1. ON BOARD DC REGULATOR
Although the EM250 already contains a dc regulator internally, the module can be
requested with an extra integrated onboard dc regulator. Some applications could benefit
from this additional regulator because as of for example:
(1) Further extension of the input voltage range or
(2) Extented battery life by replacing the regulator within EM250 by a special ultra low
quiescent current regulator or
(3) allowing for operation on very noisy power supplies
Two different types of regulators can be chosen, a linear low dropout (LDO) type or a high
efficiency switched buck regulator.
Depending on the power supply conditions of the application the optimum regulator can be
selected on demand.
3.2. ON BOARD REFERENCE CRYSTAL
A second option that is available is an on board 32,768kHz crystal reference. This option is
provided for applications that require a precision reference clock.
Where a precision 32,768kHz reference is already available on the applicationboard, it
could be fed to pin 4 instead and this option is not needed.
Please contact the manufacturer if one of the options could be useful for your product design.
ETRX2 is used for ZigBeeTM (www.zigbee.org) applications working with
EmberZNetTM of Ember Inc. (www.ember.com). EmberZNetTM is a fully ZigBeeTM compliant
networking stack. For code development Insight DesktopTM, a comprehensive
integrated development environment (IDE) and C-language compiler toolchain from
Ember Inc. is required. Insight DesktopTM is part of Ember development kits and
can currently be purchased together with programming adaptors as EM250 jumpstart kit at a
price of USD 2500,- directly from Ember Inc. (www.ember.com).
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
CLASSIFICATION
PRODUCT SPECIFICATION
Einstufung
Produktspezifikation
SUBJECT
MODEM FOR IEEE802.15.4 (ZIGBEE)
Thema
“ZigBee” Modem“ (IEEE802.15.4)
CUSTOMER’S CODE
PANASONIC’S CODE
ETRX2
ENWC9A0xyzE
No.
REV.
DS-ETR2-2400-102
PAGE
Seite
6 of 29
DATE
01.08.2006
Datum
When using ZigBeeTM technology for a product the following additional costs have to
be taken into account:
(1) Membership of the ZigBeeTM alliance, as least as adopter member for US$
3.500,-.
(2) The cost of a ZigBeeTM product certification at a testhouse (TÜV Rheinland)
ranges from approximately US$ 4.000,- to US$ 10.000,-, depending on the
implemented software.
(3) Products qualifying for ZigBeeTM certification at the ZigBeeTM alliance need a
logo administration fee of US$ 1000,- for the first product, and US$ 500,- for
each additional product.
For more details on ZigBeeTM software see also part 21.
4.
SCOPE OF THIS DOCUMENT
Umfang dieses Dokumentes
This product specification applies to the ZigBee ready modem ENWC9A0xyzE.
The last character indicates different versions (refer to part 26 Ordering Information).
The used chip is the EM250 from the US company Ember Inc. www.ember.com.
Diese Produktionsunterlagen beziehen sich auf das ZigBee ready Modem ENWC9A0xyzE.
Das letzte Zeichen bezeichnet verschiedene Versionen (Erklärung im Kapitel 25 Ordering
Information). Der verwendete ZigBee Chip ist EM250 der US Firma Ember Inc.
5.
HISTORY FOR THIS DOCUMENT
Versionsverwaltung dieses Dokumentes
Revision
Version
Date
Datum
Modification / Remarks
Änderungen / Bemerkungen
19.05.2006
Initial draft version .
20.06.2006
part 12: Note (1) modified and note (2) removed
parts 1, 14: battery low detect removed, POR specifications added
parts 19, 21.2: updated
10.07.2006
part 21.1: pin numbering correction
01.08.2006
Add chapter Regulatory Information, correct chapter Block Diagram and add also
chapter Software Declaration, revise chapter Labeling Drawing
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
CLASSIFICATION
PRODUCT SPECIFICATION
Einstufung
Produktspezifikation
SUBJECT
MODEM FOR IEEE802.15.4 (ZIGBEE)
Thema
“ZigBee” Modem“ (IEEE802.15.4)
CUSTOMER’S CODE
PANASONIC’S CODE
ETRX2
ENWC9A0xyzE
6.
No.
REV.
DS-ETR2-2400-102
PAGE
Seite
7 of 29
DATE
01.08.2006
Datum
TERMINAL LAYOUT
Anschlußbelegung
The table below informs about the 38 module pin signals for direct SMD soldering of ETRX2 to
the application board. The signal names are identical to the signal names of EM250, except for
RF and VC1.
The pin numbers in brackets () are the related pins of the pin/header connector X5, which is only
mounted for special plug versions.
Pin
No.
Pin
Name
Signal
Name
Pin
Type
Description
1(3)
GND1
GND
I/O
ground
RF
RF
I/O
RF input/output terminal
GND3
GND
I/O
ground
4(1)
GPIO0
GPIO0
MOSI
MOSI
TMR1IA.1
I/O
Digital I/O
SPI master data out of serial controller SC2
SPI slave data in of serial controller SC2
Capture Input A of Timer 1
5(2)
REG_OUT
REG_OUT
output of EM250 regulator voltage VREG_OUT (1)
GND2
GND
I/O
ground
7(10)
VBAT
VBAT
module dc supply voltage
GND3
GND
I/O
ground
9(4)
GPIO4
GPIO4
ADC0
PTI_EN
I/O
Analog
Digital I/O
ADC Input 0
Frame signal of Packet Trace Interface (PTI)
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
CLASSIFICATION
PRODUCT SPECIFICATION
Einstufung
Produktspezifikation
SUBJECT
MODEM FOR IEEE802.15.4 (ZIGBEE)
Thema
“ZigBee” Modem“ (IEEE802.15.4)
CUSTOMER’S CODE
PANASONIC’S CODE
ETRX2
ENWC9A0xyzE
Pin
No.
Pin
Name
Signal
Name
GPIO5
ADC1
PTI_DATA
GPIO3
SSEL
TMR1IB.1
GPIO2
MSCLK
MSCLK
SCL
TMR2IB.2
GPIO1
MISO
MISO
SDA
TMR2IA.2
GPIO12
RTS
TMR2IB.1
Pin
Type
I/O
Analog
I/O
I/O
I/O
I/O
I/O
I/O
10(5)
GPIO5
11(6)
GPIO3
12(7)
GPIO2
13(8)
GPIO1
14(9)
GPIO12
15
GND4
GND
I/O
16
SIF_CLK
SIF_CLK
17
SIF_MISO
SIF_MISO
18
SIF_MOSI
SIF_MOSI
19
SIF_LOADB
SIF_LOADB
I/O
20
GND5
GND
I/O
GPIO6
ADC2
TMR2CLK
TMR1ENMSK
GPIO11
CTS
MCLK
TMR2IA.1
GPIO13
TMR2OA
TMR1IA.3
I/O
Analog
I/O
I/O
RESET
GPIO14
TMR2OB
TMR1IB.3
IRQB
GPIO8
VREF_OUT
I/O
I/O
Analog
21(11)
GPIO6
22(12)
GPIO11
23(13)
GPIO13
24(14)
RESET
25(15)
26(16)
GPIO14
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
No.
REV.
DS-ETR2-2400-102
PAGE
Seite
8 of 29
DATE
01.08.2006
Datum
Description
Digital I/O
ADC Input 1
Data signal of Packet Trace Interface (PTI)
Digital I/O
SPI slave select of Serial Controller SC2
Capture Input B of Timer 1
Digital I/O
SPI master clock of Serial Controller SC2
SPI slave clock of Serial Controller SC2
I2C clock of Serial Controller SC2
Capture Input B of Timer 2
Digital I/O
SPI master data in of Serial Controller SC2
SPI slave data out of Serial Controller SC2
I2C data of Serial Controller SC2
Capture Input A of Timer 2
Digital I/O
UART RTS handshake of Serial Controller SC1
Capture Input B for Timer 2
ground
Serial interface, clock (internal pull-down)
Serial interface, master in / slave out
Serial interface, master out / slave in
Serial interface, load strobe (open-collector with internal pullup)
ground
Digital I/O
ADC Input 2
External clock input of Timer 2
External enable mask of Timer 1
Digital I/O
UART CTS handshake of Serial Controller SC1
SPI master clock of Serial Controller SC1
Capture Input A of Timer 2
Digital I/O
Waveform Output A of Timer 2
Capture Input A of Timer 1
active low module reset (internal pull-up)
Digital I/O
Waveform Output B of Timer 2
Capture Input B of Timer 1
External interrupt source B
Digital I/O
ADC reference output
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
CLASSIFICATION
PRODUCT SPECIFICATION
Einstufung
Produktspezifikation
SUBJECT
MODEM FOR IEEE802.15.4 (ZIGBEE)
Thema
“ZigBee” Modem“ (IEEE802.15.4)
CUSTOMER’S CODE
PANASONIC’S CODE
ETRX2
ENWC9A0xyzE
Pin
No.
Pin
Name
GPIO8
27(18)
GPIO9
28(17)
GPIO10
29
GND6
Signal
Name
TMR1CLK
TMR2ENMSK
IRQA
GPIO9
TXD
MO
MSDA
TMR1IA.2
GPIO10
RXD
MI
MSCL
TMR1IB.2
No.
REV.
DS-ETR2-2400-102
PAGE
Seite
9 of 29
DATE
01.08.2006
Datum
Pin
Type
I/O
I/O
I/O
I/O
External clock input of Timer 1
External enable mask of Timer 2
External interupt source A
Digital I/O
UART transmit data of Serial Controller SC1
SPI master data out of Serial Controller SC1
I2C data of Serial Controller SC2
Capture Input A of Timer 1
Digital I/O
UART receive data of Serial Controller SC1
SPI master data in of Serial Controller SC1
I2C clock of Serial Controller SC1
Capture Input B of Timer 2
Description
GND
I/O
ground
GPIO15
TMR1OA
TMR2IA.3
IRQC
GPIO16
TMR1OB
TMR2IB.3
IRQD
I/O
I/O
Digital I/O
Waveform Output A of Timer 1
Capture Input A of Timer 2
External interrupt source C
Digital I/O
Waveform Output B of Timer 1
Capture Input B of Timer 2
External interrupt source D
30(19)
GPIO15
31(20)
GPIO16
32
GND7
GND
I/O
ground
33
VC1
TX_ACTIVE
Logic-level control for external Rx/Tx switch
34
GND8
GND
I/O
ground
35
GND9
GND
I/O
ground
36
GND10
GND
I/O
ground
37
GND11
GND
I/O
ground
GPIO7
GPIO7
ADC3
REG_EN
I/O
Analog
Digital I/O
ADC Input 3
External regulator open collector output
38
Notes:
(1) In case the onboard regulator option is mounted this pin is connected to the output voltage of the
onboard regulator option and NOT to the output voltage VREG_OUT of the EM250.
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
CLASSIFICATION
PRODUCT SPECIFICATION
Einstufung
Produktspezifikation
SUBJECT
MODEM FOR IEEE802.15.4 (ZIGBEE)
Thema
“ZigBee” Modem“ (IEEE802.15.4)
CUSTOMER’S CODE
PANASONIC’S CODE
ETRX2
ENWC9A0xyzE
7.
BLOCK DIAGRAM
Blockdiagramm
LDO
VREG
VBAT
VBAT
LDO
or
DC
converter
integrated
antenna
RF transceiver 2,4GHz
16-bit XAP2b uC
128kB flash / 5k RAM
GPIO16
RESET
rf
terminal
selection,
filtering and
matching
circuitry
24MHz
SIF
RESET
programming
32,768kHz
(optional)
KEY PARTS LIST
Liste der Schlüsselkomponenten
Part Name
Teilenummer
P.W.Board
Leiterplatte
Casing
Deckel
RF-IC part name
RF IC Name
9.
GPIO0
I/O
1,8Vdc
(optional)
pad
U.FL socket
EM250
LDO
BALUN
8.
No.
REV.
DS-ETR2-2400-102
PAGE
Seite
10 of 29
DATE
01.08.2006
Datum
Material
Material
Glass cloth epoxide resin with gold plating
FR4 mit Goldauflage
Material: CuNi18ZN20, thickness 0.2mm
Material: Weißblech 0,2mm Dicke
EM250 from Ember Inc.(www.ember.com)
All information are based on [2] chapter 28.
TEST CONDITIONS
Meßbedingungen
Measurements shall be made under room temperature and humidity unless otherwise specified.
Messungen unter normalen Bedingungen, Abweichungen sind gesondert notiert.
Temperature
Temperatur
25 ± 10°C
25 ± 10°C
Humidity
Luftfeuchtigkeit
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
40 to 85%RH
40 to 85%RH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
CLASSIFICATION
PRODUCT SPECIFICATION
Einstufung
Produktspezifikation
SUBJECT
MODEM FOR IEEE802.15.4 (ZIGBEE)
Thema
“ZigBee” Modem“ (IEEE802.15.4)
CUSTOMER’S CODE
PANASONIC’S CODE
ETRX2
ENWC9A0xyzE
No.
REV.
DS-ETR2-2400-102
PAGE
Seite
11 of 29
DATE
01.08.2006
Datum
10. ABSOLUTE MAXIMUM RATINGS
Absolute Grenzwerte
The maximum ratings may not be exceeded under any circumstances, not even momentarily
and individually, as permanent damage to the module will result.
Item
Punkt
Symbol
Zeichen
Absolute Maximum Ratings
Absolute Grenzwerte
Unit
Einheit
Supply voltage
VBAT
-0.1 to +3.6
Vdc
Voltage on any GPIO[16:0] ,
SIF_CLK, SIF_MISO,
SIF_MOSI, SIF_LOADB,
OSC32A, OSC32B, RESET,
REG_OUT
Vin
-0.3 to VBAT+0.3
Vdc
Voltage on VC1
Vin
2.0
Vdc
Storage temperature range
Tstg
-40 to +105
°C
Operating temperature range
Top
-40 to +85
°C
Input RF level
Pmax
dBm
VTHHBM
±2
kV
TDeath
T.B.D.
°C
No.
(1)
ESD on any pin according to
Human Body Model (HBM)
circuit description
Lead temperature
Löttemperatur
Notes:
(1) Input must be current limited to the value specified.
11. OPERATING CONDITIONS
Betriebsbedingungen
No.
Item
Condition / Remark
The typical value
is recommended
Symbol
VDD
Supply voltage
RF Input Frequency
fC
RF Input Power
pIN
maximum Tx output power
Logic Input Voltage Low
Logic Input Voltage High
SPI clock rate
Operating temperature range
Tx normal mode (2)
VIH
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
Value
Typ
2.1
3.0
2405
pOUT
VIL
The typical value is
recommended
Min
APPROVED
genehmigt
3.6
Vdc
2480
MHz
dBm
dB
0.2x
VBAT
0.8x
VBAT
VBAT
12
MHz
+85
°C
fSPI
Top
Unit
Max
-40
CHECKED
geprüft
DESIGNED
erstellt
CLASSIFICATION
PRODUCT SPECIFICATION
Einstufung
Produktspezifikation
SUBJECT
MODEM FOR IEEE802.15.4 (ZIGBEE)
Thema
“ZigBee” Modem“ (IEEE802.15.4)
CUSTOMER’S CODE
PANASONIC’S CODE
ETRX2
ENWC9A0xyzE
No.
REV.
DS-ETR2-2400-102
PAGE
Seite
12 of 29
DATE
01.08.2006
Datum
12. DC ELECTRICAL CHARACTERISTICS
VBAT = 3.0V, Tamb = 25°C if nothing else stated
No.
Item
Module supply voltage VBAT
Internal regulated core voltage
Condition / Remark
Symbol
VBAT
connected to
(1)
REG_OUT pin 2
Quiescent current, including
internal RC oscillator
Quiescent current, including
32,768kHz oscillator
VCORE
Receive current consumption
total
Receive current consumption
10
External load on internal
regulated core voltage
11
Input voltage for logic 0
12
input voltage for logic 1
13
Input current for logic 0
14
Transmit current consumption
Transmit current consumption
2.1
3.0
3.6
Vdc
1.7
1.8
1.9
Vdc
1.0
uA
1.5
uA
ISLEEP
ITX
Transmit current consumption
Value
Typ
ISLEEP
total at +3dBm maximum
output power
total at +5dBm maximum
output power
at boost mode
total at -32dBm minimum
output power
Min
Unit
Max
35.5
mA
41.5
mA
28
mA
IRX
35.5
mA
total (boost mode)
IRX
37.5
mA
connected to
REG_OUT pin 2
IREG_OUT
ITX
ITX
mA
0.2x
VBAT
Vdc
0.8x
VBAT
VBAT
Vdc
IIL
-0.5
uA
input current for logic 1
IIH
0.5
uA
15
input pull-up resistor value
RIPU
30
16
input pull-down resistor value
RIPD
30
17
Output voltage for logic 0
18
Output voltage for logic 1
19
20
21
22
23
24
25
Output source current
(standard current pad)
Output sink current
(standard current pad)
Output source current (high
current pad: GPIO[16:13] )
Output sink current (high
current pad: GPIO[16:13] )
Total output current
for I/O pads
Input voltage threshold for
OSC32A
Output voltage level for VC1
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
(1)
VIL
VIH
VOL
VOH
Vdc
0.82x
VBAT
VBAT
Vdc
mA
mA
mA
mA
40
mA
IOLS
IOHH
IOLH
VOH_L
APPROVED
genehmigt
kΩ
0.18x
VBAT
IOHS
IOH +
IOL
VIH_L
kΩ
0.2
0.18x
VBAT
CHECKED
geprüft
0.8x
VBAT
0.82x
VBAT
Vdc
Vdc
DESIGNED
erstellt
CLASSIFICATION
PRODUCT SPECIFICATION
Einstufung
Produktspezifikation
SUBJECT
MODEM FOR IEEE802.15.4 (ZIGBEE)
Thema
“ZigBee” Modem“ (IEEE802.15.4)
CUSTOMER’S CODE
PANASONIC’S CODE
ETRX2
ENWC9A0xyzE
No.
REV.
DS-ETR2-2400-102
PAGE
Seite
13 of 29
DATE
01.08.2006
Datum
Notes:
(1) For more information about the internal regulated core voltage refer to part 5.7 in [2]. As the
internal regulated core voltage at REG_OUT mainly feeds circuitry on ETRX2, the REG_OUT
module pin may only be slightly loaded and without feeding noise to REG_OUT.
In case the dc regulator option is mounted REG_OUT is connected to the regulator option output
instead and the internal regulated core voltage is not accessible.
13. A/D CONVERTER CHARACTERISTICS
No
Item
ATD characteristics
refer to datasheet EM250 part 5.5 ADC Module
ATD timing/performance
characteristics
refer to datasheet EM250 part 5.5 ADC Module
14. AC ELECTRICAL CHARACTERISTICS
VBAT = 3.0V, Tamb = 25°C, measured at 50Ω terminal load (1)
Unit
No
Receiver
Limit
Min
Typ
Max
Sensitivity for 1% Packet Error Rate (PER)
-85
-96
dBm
-85
-97
dBm
dBm
10
Sensitivity for 1% Packet Error Rate (PER)
(boost mode)
Saturation (maximum input level for correct operation,
low gain)
Adjacent Channel Rejection
(1% PER and desired signal –82dBm acc. to [1])
Alternate Channel Rejection
(1% PER and desired signal –82dBm acc. to [1])
Channel Rejection for all other channels
(1% PER and desired signal –82dBm acc. to [1])
802.11g rejection centered at +12MHz or –13MHz
(1% PER and desired signal –82dBm acc. to [1])
Co-channel rejection
(1% PER and desired signal –82dBm acc. to [1])
Relative frequency error
(2x40ppm required by [1])
Relative timing error
(2x40ppm required by [1])
35
dB
40
dB
40
dB
40
dB
-6
dBc
-120
120
ppm
-120
120
ppm
11
Linear RSSI range
40
dB
12
Spurious Emissions <1GHz
TBD
-57
dBm
13
Spurious Emissions >1GHz
TBD
-47
dBm
Notes:
(1) At pin 38 RF or U.FL socket, for all channels number 11,12,..., 26 according to [1]
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
CLASSIFICATION
PRODUCT SPECIFICATION
Einstufung
Produktspezifikation
SUBJECT
MODEM FOR IEEE802.15.4 (ZIGBEE)
Thema
“ZigBee” Modem“ (IEEE802.15.4)
CUSTOMER’S CODE
PANASONIC’S CODE
ETRX2
ENWC9A0xyzE
No
14
15
16
Transmitter
Output power at highest power setting
normal mode
Output power at highest power setting
boost mode
Output power at lowest power setting
normal mode
17
Error vector magnitude
18
Carrier frequency error
19
20
21
22
23
24
No.
REV.
DS-ETR2-2400-102
PAGE
Seite
14 of 29
DATE
01.08.2006
Datum
Unit
Limit
Min
Typ
dBm
N.A.(2)
dBm
-32
dBm
15
-40
PSD mask relative
3.5MHz distance from carrier
PSD mask absolute
3.5MHz distance from carrier
nd
2 harmonic at highest power setting
normal mode
rd
3 harmonic at highest power setting
normal mode
nd
2 harmonic at highest power setting
boost mode
rd
3 harmonic at highest power setting
boost mode
Max
35
40
ppm
-20
dB
-30
dBm
-55
-30
dBm
-55
-30
dBm
-50
-30
dBm
-50
-30
dBm
25
Spurious Emissions <1GHz
< -54
-36
dBm
26
Spurious Emissions >1GHz
< -60
-30
dBm
Notes:
(2) Tx boost mode setting is not allowed for this version with integrated antenna and compliance
with [1]
No
Standby
Unit
Limit
Min
Typ
Max
27
Spurious Emissions <1GHz
TBD
-57
dBm
28
Spurious Emissions >1GHz
TBD
-47
dBm
No
Sythesizer characteristics
Limit
Min
Typ
Max
Unit
29
Lock time from off state, with correct VCO DAC settings
100
uS
30
Relock time, channel change or Rx/Tx turnaround
100
us
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
CLASSIFICATION
PRODUCT SPECIFICATION
Einstufung
Produktspezifikation
SUBJECT
MODEM FOR IEEE802.15.4 (ZIGBEE)
Thema
“ZigBee” Modem“ (IEEE802.15.4)
CUSTOMER’S CODE
PANASONIC’S CODE
ETRX2
ENWC9A0xyzE
No
Power On Reset (POR) Specifications
No.
REV.
DS-ETR2-2400-102
PAGE
Seite
15 of 29
DATE
01.08.2006
Datum
Unit
Limit
Min
Typ
Max
31
VBAT POR release
1.0
1.2
1.4
Vdc
32
VBAT POR assert
0.5
0.6
0.7
Vdc
33
VCORE POR release
1.35
1.5
1.65
Vdc
34
VCORE POR hysteresis
0.08
0.1
0.12
Vdc
15. MECHANICAL REQUIREMENTS
Mechanische Anforderungen
No.
Item
Punkt
Solderability
Lötfähigkeit
Resistance to
soldering heat
Limit
Grenzwerte
More than 75% of the soldering area shall be
coated by solder
Mehr als 75% der Lötfläche soll mit Lötpaste
bedeckt sein.
It shall be satisfied electrical requirements and
not be mechanical damage
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
APPROVED
genehmigt
Condition
Bedingung
Reflow soldering with
recommendable temperature
profile
See chapter 16.2
CHECKED
geprüft
DESIGNED
erstellt
CLASSIFICATION
PRODUCT SPECIFICATION
Einstufung
Produktspezifikation
SUBJECT
MODEM FOR IEEE802.15.4 (ZIGBEE)
Thema
“ZigBee” Modem“ (IEEE802.15.4)
CUSTOMER’S CODE
PANASONIC’S CODE
ETRX2
ENWC9A0xyzE
No.
REV.
DS-ETR2-2400-102
PAGE
Seite
16 of 29
DATE
01.08.2006
Datum
16. SOLDERING TEMPERATURE-TIME PROFILE (FOR REFLOW SOLDERING)
Temperatur-Zeit Profil für die Reflowlötung
16.1. FOR LEAD SOLDER
Recommended temp. profile
for reflow soldering
10 ±1s
30 +20/-10s
235°C max.
Temp.[°C]
220 ±5°C
200°C
150 ±10°C
90 ±30s
Time [s]
16.2. FOR LEAD FREE SOLDER
Our used temp. profile
for reflow soldering
Temp.[°C]
30 +20/-10s
230°C -250°C max.
220°C
150°C – 190°C
90 ±30s
Time [s]
Reflow permissible cycle:
Opposite side reflow is prohibited due to module weight.
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
CLASSIFICATION
PRODUCT SPECIFICATION
Einstufung
Produktspezifikation
SUBJECT
MODEM FOR IEEE802.15.4 (ZIGBEE)
Thema
“ZigBee” Modem“ (IEEE802.15.4)
CUSTOMER’S CODE
PANASONIC’S CODE
ETRX2
ENWC9A0xyzE
No.
REV.
DS-ETR2-2400-102
PAGE
Seite
17 of 29
DATE
01.08.2006
Datum
17. MODULE DIMENSIONS
Modulabmessungen
No.
Item
Punkt
Dimension
Abmessung
Tolerance
Toleranz
Width
20.50
± 0.20
Lenght
37.50
± 0.20
Height
2.80
± 0.10
Remark
Bemerkung
With case
18. FOOT PRINT OF THE MODULE
Lötpads vom Modul
Dimensions in mm.
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
CLASSIFICATION
PRODUCT SPECIFICATION
Einstufung
Produktspezifikation
SUBJECT
MODEM FOR IEEE802.15.4 (ZIGBEE)
Thema
“ZigBee” Modem“ (IEEE802.15.4)
CUSTOMER’S CODE
PANASONIC’S CODE
ETRX2
ENWC9A0xyzE
No.
REV.
DS-ETR2-2400-102
PAGE
Seite
18 of 29
DATE
01.08.2006
Datum
19. LABELING DRAWING
Kennzeichnung des Moduls durch Label
The label dimensions are 13,0mm x 18,5
mm. It is suited for reflow soldering.
FCC ID: T7VEM250A
Imprint
Aufdruck
ETRX2
Date Code
01
01Z
Description
Beschreibung
This is the marketing name from Telegesis, the ENW number is only integrated in the 2D
Code and marked with the Z
Production Date Code in the format YYMMDD, e.g. 060602
Indication for software revision for our final test, customer are able to flash there own
software.
Indication for the hardware revision, Z indicates the ES status, will be removed after MP
ready.
0000001
Indication for the serial number.
FCC ID:
T7VEM250A
This is the FCC ID, should be labelled only after FCC approval.
2D-Barcode
Information in the 2D-Barcode are the serial number [7 signs], the ENW-Part-Number [11
signs], identifier for the software release [2 signs], the identifier for the hardware release [2
signs] and the production date code in the format Year-Month-Day [6 signs], separated by a
semicolon.
The IEEE802.15.4 MAC Address [12 characters] are stored in the EM250, therefore it could
not be on the label, but must be stored in the excel sheet to have a reference betweeen MAC
address and serial number.
20. RECOMMENDED LAND PATTERN
Empfohlenes Land Pattern
This part will be included in next revisions.
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
CLASSIFICATION
PRODUCT SPECIFICATION
Einstufung
Produktspezifikation
SUBJECT
MODEM FOR IEEE802.15.4 (ZIGBEE)
Thema
“ZigBee” Modem“ (IEEE802.15.4)
CUSTOMER’S CODE
PANASONIC’S CODE
ETRX2
ENWC9A0xyzE
No.
REV.
DS-ETR2-2400-102
PAGE
Seite
19 of 29
DATE
01.08.2006
Datum
21. SOFTWARE
Software
21.1. SOFTWARE DECLARATION
With the signature on the front page, customer clearly understand and agreed that
the software, which is included in the module is only for testing purpose and
Panasonic deny any responsibility for product liability, related to software matters.
21.2. SOFTWARE TOOLS
In order to develop code and ZigBeeTM networks the Ember Insight Desktop Development
Environment is required. This environment works with the preceeding EM2420, the EM250
and the upcoming EM260. For code development it comprises the Integrated Development
Environment (IDE) named xIDE based on eclipse 3.1.0 for editing, compiling and
debugging of C–applications. In addition network visualization and debugging tools are
included.
For programming the Ember Insight Adapter is required. This adaptor has to be linked to
the computer where the Ember Insight Desktop is installed on over an Ethernet network
connection. Before connecting ETRX2 to the Ember Insight Adaptor study the latest
Ember Insight Adaptor documentation. The following pins of ETRX2 have to be connected
to the signals on the debug connector of the Ember Insight adaptor:
ETRX2 pin
ETRX2 signal name
Insight Adapter signal name
various
ground
ground
VBAT
3.0Vdc
24(14)
RESET
RSTB
16
SIF_CLK
SIF_CLK
17
SIF_MISO
SIF_MISO
18
SIF_MOSI
SIF_MOSI
19
SIF_LOADB
SIF_LOADB
7(10)
(1)
as packet trace interface (PTI) also connect the following signals:
9(4)
GPIO4
GPIO4
10(5)
GPIO5
GPIO5
Note:
(1) Only if the Ember Insight Adaptor is set to powering the target device ETRX2.
The pin numbers in brackets () are the related pins of the pin/header connector X5,
which is only mounted for special plug versions.
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
CLASSIFICATION
PRODUCT SPECIFICATION
Einstufung
Produktspezifikation
SUBJECT
MODEM FOR IEEE802.15.4 (ZIGBEE)
Thema
“ZigBee” Modem“ (IEEE802.15.4)
CUSTOMER’S CODE
PANASONIC’S CODE
ETRX2
ENWC9A0xyzE
No.
REV.
DS-ETR2-2400-102
PAGE
Seite
20 of 29
DATE
01.08.2006
Datum
21.3. EMBER ZIGBEETM STACK
EmberZNet (currently version 2.3) is the ZigBee stack provided with EM250. It supports as
networking topologies true mesh, star and cluster networks. The ZigBee devices ZigBee
Coordinator, ZigBee Full Fuctional Device and ZigBee End Devices are supported.
For the ease of application programming EmberZNet is controlled by the application over
API commands. Direct ZigBee APS layer APIs are provided for applications that require
low level ZigBee control.
According to [1] each ZigBee device has a unique address. This address is provided
by Ember Inc. with the EM250.
For more information on the items above see the website of Ember Inc. (www.ember.com)
and the documentation included in the Ember Insight Desktop package as part of the
Ember development kits.
22. RELIABILITY TESTS
Zuverlässigkeitstests
The measurement should be done after exposed to room temperature and humidity for 1hour.
Die Messungen sollten erst nach einer Stunde Lagerung unter normalen Bedingungen erfolgen.
No.
Item
Punkt
Limit
Grenzwerte
Condition
Bedingung
a) Freq.:10~50Hz,Amplitude:1.5mm
a) 20min. / cycle,1hrs. each of XYZ axis
b) Freq.:30~100Hz, 6G
b) 20min. / cycle,1hrs. each of XYZ axis
Dropped onto hard wood from height of 50cm for
3 times
-40°C for 30min. and +85°C for 30min.;
each temperature 300 cycles
Vibration test
Electrical parameter should be
in specification
Shock test
the same as the above
Heat cycle test
the same as the above
Moisture test
the same as the above
+60°C, 90% RH, 300h
Low temp. test
the same as the above
-40°C, 300h
High temp. test
the same as the above
+85°C, 300h
23. APPLICATION NOTES
Applikationshinweise
23.1. CAUTIONS FOR SAFETY
Sicherheitshinweise
These specifications are intended to preserve the quality assurance of products as
individual components.
Before use, check and evaluate their operation when mounted on your products. Abide by
these specifications, without deviation when using the products.These products may shortcircuit. If electrical shocks, smoke, fire, and/or accidents involving human life are
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
CLASSIFICATION
PRODUCT SPECIFICATION
Einstufung
Produktspezifikation
SUBJECT
MODEM FOR IEEE802.15.4 (ZIGBEE)
Thema
“ZigBee” Modem“ (IEEE802.15.4)
CUSTOMER’S CODE
PANASONIC’S CODE
ETRX2
ENWC9A0xyzE
No.
REV.
DS-ETR2-2400-102
PAGE
Seite
21 of 29
DATE
01.08.2006
Datum
anticipated when a short circuit occurs, then at least, provide the following failsafe
functions, as a minimum.
(1) Ensure the safety of the whole system by installing a protection circuit and a protection
device.
(2) Ensure the safety of the whole system by installing a redundant circuit or another
system to prevent a single fault causing an unsafe status.
23.2. DESIGN ENGINEERING NOTES
Designhinweise
(1) Heat is the major cause of shortening the life of these products. Avoid assembly and
use of the target equipment in conditions where the products' temperature may exceed
the maximum allowable.
(2) Failure to do so may result in degrading of the product’s functions and damage to the
product.
(3) If pulses or other transient loads (a large load applied in a short time) are applied to
the products, then before use, check and evaluate their operation when assembled on
your products.
(4) Carefully position the products so that their heat will not burn into printed circuit boards
or affect the other components that are susceptible to heat.
(5) Carefully locate these products so that their temperatures will not increase due to the
effects of heat generated by neighboring components.
(6) If a vinyl-covered wire comes into contact with the products, then the cover will melt
and generate toxic gas, damaging the insulation. Never allow contact between the
cover and these products to occur.
(7) These products are intended for general purpose and standard use in general
electronic equipment, such as home appliances, office equipment, information and
communication equipment.
(8) These products are not intended for other uses, other than under the special
conditions shown below. Before using these products under such special conditions,
check their performance and reliability under the said special conditions carefully to
determine whether or not they can be used in such a manner.
(9) In liquid, such as water, salt water, oil, alkali, or organic solvent, or in places where
liquid may splash.
(10) In direct sunlight, outdoors, or in a dusty environment
(11) In an environment where condensation occurs.
(12) In an environment with a high concentration of harmful gas (e.g. salty air, HCl, Cl2,
SO2, H2S, NH3, and NOx)
(13) If an abnormal voltage is applied due to a problem occurring in other components or
circuits, replace these products with new products because they may not be able to
provide normal performance even if their electronic characteristics and appearances
appear satisfactory.
(14) Mechanic stress during assembly on board and operation has to be avoived.
(15) Pressing on parts of the metal cover or fastening objects to the metal cover is not
allowed.
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
CLASSIFICATION
PRODUCT SPECIFICATION
Einstufung
Produktspezifikation
SUBJECT
MODEM FOR IEEE802.15.4 (ZIGBEE)
Thema
“ZigBee” Modem“ (IEEE802.15.4)
CUSTOMER’S CODE
PANASONIC’S CODE
ETRX2
ENWC9A0xyzE
No.
REV.
DS-ETR2-2400-102
PAGE
Seite
22 of 29
DATE
01.08.2006
Datum
23.3. STORAGE CONDITIONS
Lagerbedingungen
The module may not be stressed mechanically during storage.
Do not store these products in the following conditions or the performance characteristics
of the product, such as RF performance will be adversely affected:
(1) Storage in salty air or in an environment with a high concentration of corrosive gas,
such as Cl2, H2S, NH3, SO2, or NOX
(2) Storage in direct sunlight
(3) Storage in an environment where the temperature may be outside the range of 5°C to
35°C range, or where the humidity may be outside the 45 to 85% range.
(4) Storage of the products for more than one year after the date of delivery at your
company if all the above conditions (1) to (3) have been avoided.
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
CLASSIFICATION
PRODUCT SPECIFICATION
Einstufung
Produktspezifikation
SUBJECT
MODEM FOR IEEE802.15.4 (ZIGBEE)
Thema
“ZigBee” Modem“ (IEEE802.15.4)
CUSTOMER’S CODE
PANASONIC’S CODE
ETRX2
ENWC9A0xyzE
No.
REV.
DS-ETR2-2400-102
PAGE
Seite
23 of 29
DATE
01.08.2006
Datum
24. PACKAGING
Verpackung
24.1. EMBOSSED TAPE / BLISTERGURT
(1)
Dimension of the tape / Abmessungen des Gurtes (EIAJ-tbd)
(2)
Cover tape reel strength / Abzugskräfte Blistergurt Deckfolie
Force direction
θ = 10deg
Speed = 300mm/min.
Cover tape reel strength
=0.098~0.68N (10~70g)
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
CLASSIFICATION
PRODUCT SPECIFICATION
Einstufung
Produktspezifikation
SUBJECT
MODEM FOR IEEE802.15.4 (ZIGBEE)
Thema
“ZigBee” Modem“ (IEEE802.15.4)
CUSTOMER’S CODE
PANASONIC’S CODE
ETRX2
ENWC9A0xyzE
(3)
No.
REV.
DS-ETR2-2400-102
PAGE
Seite
24 of 29
DATE
01.08.2006
Datum
Empty hollow / leere Taschen
Direction of feed
Vorschubrichtun
Top cover tape
Empty hollow more
Component
Empty hollow more
than 10 pitch
packed area than 10pitch
more than 200mm
Mehr als 10 leere
Modulbereic Mehr als 10 leere
Deckfolie groesser als
Empty hollow in component packed area shall be less than two per reel and those hollows
shall not be consecutive.
Es dürfen minimal 2 leere Taschen im Bereich der Komponenten vorhanden sein, diese
dürfen aber nicht aufeinander folgen.
24.2. COMPONENT DIRECTION
Komponentenanordnung
Top cover tape shall not be found on reel holes and shall not stick out from reel.
Deckfolien darf nicht durch die Löcher der Spule und nicht außerhalb der Spule geführt
werden.
Tape running direction
Laufrichtung des Bandes
12
Part No.
(top view)
Component direction
Komponentenrichtung
Figure 1
24.3. REEL DIMENSION
Abmaße der Rolle
(1)
(2)
Quantity per reel : 400 pieces
Anzahl pro Rolle : 400 Stück
Marking : Customer’s part No. / Quantity / Lot No. and Our part# with bar-code
shall be on the reel.
Kennzeichnung : Kundennummer / Anzahl / Losnummer und unsere
Komponentennummer als Barcode wird auf die Rolle gedruckt
Refer to figure 2
Bezugnehmend zur Zeichnung 2
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
CLASSIFICATION
PRODUCT SPECIFICATION
Einstufung
Produktspezifikation
SUBJECT
MODEM FOR IEEE802.15.4 (ZIGBEE)
Thema
“ZigBee” Modem“ (IEEE802.15.4)
CUSTOMER’S CODE
PANASONIC’S CODE
ETRX2
ENWC9A0xyzE
No.
REV.
DS-ETR2-2400-102
PAGE
Seite
25 of 29
DATE
01.08.2006
Datum
24.4. PACKAGE
Umverpackung
(1)
(2)
Package box :
Paketbox.:
Marking :
φ 13 +/-1
2 +/-0.5
φ 80 +/-2
φ 13 +/-0.5
Kennzeichnung :
1 or 2 reel (depends on quantity)
1 oder 2 Rollen (abhängig von der Liefermenge)
Customer’s part No. / Quantity / Lot No. and Our part#
with bar-code shall be on the package box.
Kundennummer / Anzahl / Losnummer und unsere
Komponentennummer als Barcode wird auf die
Verpackung gedruckt
Refer to figure 2 and 3
Bezugnehmend zur Zeichnung 2 und 3
Figure 3
Marking
φ 330
Figure 2
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
Marking
33.5 +/-1.0
2.0 +/-0.2
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
CLASSIFICATION
PRODUCT SPECIFICATION
Einstufung
Produktspezifikation
SUBJECT
MODEM FOR IEEE802.15.4 (ZIGBEE)
Thema
“ZigBee” Modem“ (IEEE802.15.4)
CUSTOMER’S CODE
PANASONIC’S CODE
ETRX2
ENWC9A0xyzE
No.
REV.
DS-ETR2-2400-102
PAGE
Seite
26 of 29
DATE
01.08.2006
Datum
25. ORDERING INFORMATION
Bestellinformationen
Ordering part number
ENWCZA05A3E (2)
ENWCZA06N2E (2)
ENWC9A07N4E (2)
MOQ (1)
Description
Engineering Sample ETRX2
ETRX2 with integrated ceramic antenna (U.FL socket will not be
mounted, when the module is in mass production)
Engineering Sample ETRX2
ETRX2 with U.FL male socket (ceramic antenna will not be
mounted, when the module is in mass production)
Engineering Sample ETRX2
ETRX2 with RF out on a SMD pad (U.FL plug and ceramic antenna
will not be mounted, when the module is in mass production)
Notes:
(1) Abbreviation for Minimum Order Quantity (MOQ). ).If this module is in mass production the
standard MOQ are 400 pieces, fewer only on customer demand.
(2) As long as the module has engineering status, the ceramic antenna and the U.FL socket are
mounted for all versions.
The “Z” in the ordering part number indicates the engineering sample status. After mass
production the “Z” will be changed to the “9”.
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
CLASSIFICATION
PRODUCT SPECIFICATION
Einstufung
Produktspezifikation
SUBJECT
MODEM FOR IEEE802.15.4 (ZIGBEE)
Thema
“ZigBee” Modem“ (IEEE802.15.4)
CUSTOMER’S CODE
PANASONIC’S CODE
ETRX2
ENWC9A0xyzE
No.
REV.
DS-ETR2-2400-102
PAGE
Seite
27 of 29
DATE
01.08.2006
Datum
26. ROHS DECLARATION
RoHS-Erklärung
Declaration of environmental compatibility for supplied products:
Hereby we declare to our best present knowledge based on declaration of our suppliers that this
product do not contain by now the following substances which are banned by Directive
2002/95/EC (RoHS) or if contain a maximum concentration of 0,1% by weight in homogeneous
materials for
•
•
•
•
•
Lead and lead compounds
Mercury and mercury compounds
Chromium (VI)
PBB (polybrominated biphenyl) category
PBDE (polybrominated biphenyl ether) category
And a maximum concentration of 0,01% by weight in homogeneous materials for
•
Cadmium and cadmium compounds
27. DATA SHEET STATUS
Datenblatt Status
This data sheet contains data from the PRELIMINARY specification. Supplementary data will be
published at a later date. Panasonic Electronic Devices (Europe) GmbH reserves the right to
change the specification without notice, in order to improve the design and supply the best
possible product.
Please consult the most recently issued data sheet before initiating or completing a design.
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
CLASSIFICATION
PRODUCT SPECIFICATION
Einstufung
Produktspezifikation
SUBJECT
MODEM FOR IEEE802.15.4 (ZIGBEE)
Thema
“ZigBee” Modem“ (IEEE802.15.4)
CUSTOMER’S CODE
PANASONIC’S CODE
ETRX2
ENWC9A0xyzE
No.
REV.
DS-ETR2-2400-102
PAGE
Seite
28 of 29
DATE
01.08.2006
Datum
28. REGULATORY INFORMATION
28.1. FCC NOTICE
The device ETRX2, including the ceramic antenna (ENWC9A05A3E) complies with Part
15 of the FCC Rules. The device meets the requirements for modular transmitter approval
as detailed in FCC public Notice DA00-1407.transmitter
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received, including
interference that may cause undesired operation.
28.2. CAUTION
The FCC requires the user to be notified that any changes or modifications made to this
device that are not expressly approved by Panasonic Electronic Devices Europe GmbH
may void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
28.3. LABELING REQUIREMENTS
The Original Equipment Manufacturer (OEM) must ensure that FCC labeling requirements
are met. This includes a clearly visible label on the outside of the OEM enclosure
specifying the appropriate Panasonic FCC identifier for this product as well as the FCC
Notice above. The FCC identifier are FCCID: T7VEM250A. This FCC identifier is only
valid for the part number ENWC9A05A3E (ETRX2 with mounted ceramic antenna). For
details, please see the chapter 25. Ordering Information.
The EUT is labelled with FCC ID: T7VEM250A. This Label must be visible for the user in
the end product. If the module is inside of an end product, the label will not be visible. In
this case the end product will be labelled exterior with "Contains FCC ID: T7VEM250A"
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
CLASSIFICATION
PRODUCT SPECIFICATION
Einstufung
Produktspezifikation
SUBJECT
MODEM FOR IEEE802.15.4 (ZIGBEE)
Thema
“ZigBee” Modem“ (IEEE802.15.4)
CUSTOMER’S CODE
PANASONIC’S CODE
ETRX2
ENWC9A0xyzE
No.
REV.
DS-ETR2-2400-102
PAGE
Seite
29 of 29
DATE
01.08.2006
Datum
28.4. ANTENNA WARNING
The related part number for this device is ENWC9A06N2E (ETRX2 with mounted
connector). For details, please see the chapter 25. Ordering Information. This device will
be tested with an UFL connector from company Hirose and with the antennas listed below.
When integrated in the OEMs product, these fixed antennas require installation preventing
end-users from replacing them with non-approved antennas. Any antenna not in the
following table must be tested to comply with FCC Section 15.203 for unique antenna
connectors and Section 15.247 for emissions. The FCC identifier for this device will be
available, after a first measurement with an approved antenna.
28.5. APPROVED ANTENNA LIST
Note: We are able to qualify your antenna and will add to this list as that process is completed.
Item
Part Number
Manufacturer
Frequency Band
Type
Gain (dBi)
28.6. RF EXPOSURE ETRX2
To comply with FCC RF Exposure requirements, the Original Equipment Manufacturer
(OEM) must ensure that the approved antenna in the previous table must be installed
and/or configured to operate with a separation distance of 2.5cm or more from all persons
to satisfy RF Exposure compliance.
The preceding statement must be included as a CAUTION statement in manuals for
products operating with the approved antennas in the previous table to alert users on FCC
RF Exposure compliance.
Any notification to the end user of installation or removal instructions about the integrated
radio module is not allowed.
The radiated output power of ETRX2 with mounted ceramic antenna
(FCC ID: T7VEM250A) is far below the FCC radio frequency exposure limits.
Nevertheless, the ETRX2 shall be used in such a manner that the potential for human
contact during normal operation is minimized.
The EUT meets the requirements of FCC section 15.249, even if the EUT transmitted at
the maximum allowed field strength (50,000 uV/m),which the equivalent e.i.r.p would be
0.75 mW. End users may not be provided with the module installation instructions. OEM
integrators and end users must be provided with transmitter operating conditions for
satisfying RF exposure compliance.
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
CLASSIFICATION
PRODUCT SPECIFICATION
Einstufung
Produktspezifikation
SUBJECT
MODEM FOR IEEE802.15.4 (ZIGBEE)
Thema
“ZigBee” Modem“ (IEEE802.15.4)
CUSTOMER’S CODE
PANASONIC’S CODE
ETRX2
ENWC9A0xyzE
No.
REV.
DS-ETR2-2400-102
PAGE
Seite
30 of 29
DATE
01.08.2006
Datum
29. RELATED DOCUMENTS
Mitgeltende Dokumente
[1]
IEEE Standard 802.15.4 –2003 Wireless Medium Access Control (MAC) and Physical
Layer (PHY) Specifications for Low-Rate Wireless Personal Area Networks (LR-WPANs)
[2]
Data Sheet EM250, 120-0082-000F March 23, 2006, Ember Inc. (www.ember.com)
[3]
Data Sheet U.FL-Series 2004.2 Hirose
Ultra Small Surface Mount Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated
Height
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
CLASSIFICATION
PRODUCT SPECIFICATION
Einstufung
Produktspezifikation
SUBJECT
MODEM FOR IEEE802.15.4 (ZIGBEE)
Thema
“ZigBee” Modem“ (IEEE802.15.4)
CUSTOMER’S CODE
PANASONIC’S CODE
ETRX2
ENWC9A0xyzE
No.
REV.
DS-ETR2-2400-102
PAGE
Seite
31 of 29
DATE
01.08.2006
Datum
30. GENERAL INFORMATION
Allgemeine Informationen
© Panasonic Electronic Devices (Europe) GmbH 2006.
All rights reserved.
This product description does not lodge the claim to be complete and free of mistakes.
Please contact the related product manager in every case.
If we deliver samples to the customer, these samples have the status Engineering Samples.
This means, the design of this product is not yet concluded. Engineering Samples may be
partially or fully functional, and there may be differences to be published Data Sheet.
Engineering Samples are not qualified and are not to be used for reliability testing or series
production.
Disclaimer:
Customer acknowledges that samples may deviate from the Data Sheet and may bear defects
due to their status of development and the lack of qualification mentioned above.
Panasonic Electronic Devices (Europe) GmbH rejects any liability or product warranty for
Engineering Samples. In particular, Panasonic Electronic Devices (Europe) GmbH disclaims
liability for damages caused by
• the use of the Engineering Sample other than for Evaluation Purposes, particularly the
installation or integration in an other product to be sold by Customer,
• deviation or lapse in function of Engineering Sample,
• improper use of Engineering Samples.
Panasonic Electronic Devices (Europe) GmbH disclaimes any liability for consequential and
incidental damages.
In case of any questions, please contact your local sales partner or the related product
manager.
31. LIFE SUPPORT POLICY
Politik für Lebenserhaltungssysteme
This Panasonic Electronic Devices (Europe) GmbH product is not designed for use in life
support appliances, devices, or systems where malfunction can reasonably be expected to
result in a significant personal injury to the user, or as a critical component in any life support
device or system whose failure to perform can be reasonably expected to cause the failure of
the life support device or system, or to affect its safety or effectiveness. Customers using or
selling these products for use in such applications do so at their own risk and agree to fully
indemnify Panasonic Electronic Devices (Europe) GmbH for any damages resulting.
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2006:08:01 21:20:17+02:00
Create Date                     : 2006:08:01 19:18:39Z
Page Count                      : 31
Creation Date                   : 2006:08:01 19:18:39Z
Mod Date                        : 2006:08:01 21:20:17+02:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : Schoss
Metadata Date                   : 2006:08:01 21:20:17+02:00
Creator                         : Schoss
Title                           : 1
Page Mode                       : UseNone
Tagged PDF                      : Yes

EXIF Metadata provided by EXIF.tools