Panasonic Devices Europe PAN10 Bluetooth Module User Manual TABLE OF CONTENTS

Panasonic Industrial Devices Europe GmbH Bluetooth Module TABLE OF CONTENTS

UserManual.wiki >

Panasonic Devices Europe >

PAN10 User Manual >

15_ENW89837AxKF UserMan

Contents

1. 15_ENW89837AxKF UserMan
2. User manual

15_ENW89837AxKF UserMan

CLASSIFICATION PRODUCT SPECIFICATION No. DS-1026-2400-102 REV. 0.3 SUBJECT CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PAGE 1 of 35 CUSTOMER’S CODE PAN1026 PANASONIC’S CODE ENW89837AxKF DATE 02.10.2013 Power Electronics R&D Center Wireless Connectivity Panasonic Industrial Devices Europe GmbH APPROVED genehmigt CHECKED geprüft DESIGNED erstellt Product Specification Panasonic Industrial Devices Europe GmbH Zeppelinstrasse 19 21337 Lüneburg Applicant / Manufacturer Hardware Germany TOSHIBA Electronics Europe GmbH Hansaallee 181 40549 Düsseldorf Applicant / Manufacturer Software Germany Software Version Please refer to chapter 20 / 21 By purchase of any of products described in this document the customer accepts the document's validity and declares their agreement and understanding of its contents and recommendations. Panasonic reserves the right to make changes as required without notification. CHECKED / APPROVED: Company: DATE: NAME: SIGNATURE: NOTE: AT LEAST ONE SET OF APPROVED SPECIFICATIONS SHOULD BE RETURNED TO THE ADDRESS OF THE ISSUING PARTY.

CLASSIFICATION PRODUCT SPECIFICATION No. DS-1026-2400-102 REV. 0.3 SUBJECT CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PAGE 3 of 35 CUSTOMER’S CODE PAN1026 PANASONIC’S CODE ENW89837AxKF DATE 02.10.2013 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de 19 Packaging .....................................................................................................................24 19.1 Tape Dimension................................................................................................... 24 19.2 Packing in Tape ...................................................................................................24 19.3 Component Direction ...........................................................................................25 19.4 Reel Dimension ...................................................................................................25 19.5 Label for Package................................................................................................26 19.6 Total Package...................................................................................................... 26 20 Ordering Information .....................................................................................................27 21 Information regarding Software Versions......................................................................27 22 Software........................................................................................................................28 23 Software block diagram.................................................................................................29 24 RoHS and REACH Declaration..................................................................................... 30 25 Data Sheet Status.........................................................................................................31 26 History for this Document..............................................................................................31 27 Related Documents.......................................................................................................31 28 General Information ...................................................................................................... 32 29 Regulatory Information..................................................................................................32 29.1 FCC Notice ..........................................................................................................32 29.2 Caution ................................................................................................................32 29.3 Labeling Requirements........................................................................................ 33 29.4 Antenna Warning .................................................................................................33 29.5 Approved Antenna List ........................................................................................33 29.6 RF Exposure PAN1026 .......................................................................................33 30 Industry Canada Certification........................................................................................34 30.1 IC Notice ..............................................................................................................34 30.2 Labeling Requirements........................................................................................ 34 31 European R&TTE Declaration of Conformity ................................................................ 34 32 Life Support Policy ........................................................................................................35

CLASSIFICATION PRODUCT SPECIFICATION No. DS-1026-2400-102 REV. 0.3 SUBJECT CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PAGE 5 of 35 CUSTOMER’S CODE PAN1026 PANASONIC’S CODE ENW89837AxKF DATE 02.10.2013 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de 3 BLUETOOTH LOW ENERGY Bluetooth Low Energy (BLE) is a part of Bluetooth Ver. 4.0, BT 4.0 covers both BLE as well as BT classic 2.1 and 3.0. If both are implemented in one device it is called dual mode. Dual mode chips implement the low energy specification,providing connectivity to coin cell battery applications. Dual mode combines low energy with the power of classic Bluetooth and are likely to become a de facto feature in almost all new Bluetooth enabled cellular phones,computers or portable communication nodes. Bluetooth Low Energy (BLE) is not backwards compatible with previous Bluetooth classic standards (2.1+EDR or 3.0). Dual mode Bluetooth 4.0 is backwards compatible but is not practical for low power devices but targeted to gateway products 4 APPLICATIONS FOR THE MODULE All Embedded Wireless Applications  Access Points  Proximity  Industrial Control  Smart Phone  Medical  Access Points  Scanners  Temperature  Wireless Sensors  Wellness  Low Power  Sports 5 DESCRIPTION FOR THE MODULE The PAN1026 is a short-range Class 2 BLE dual mode module for implementing Bluetooth functionality into various electronic devices. A block diagram can be found in chapter 8. Please contact your local sales office for further details on additional options and services: www.panasonic.com/rfmodules for the US, http://industrial.panasonic.com/eu/i/29606/wireless_modules/wireless_modules.htmlfor EU or write an e-mail to wireless@eu.panasonic.com.

CLASSIFICATION PRODUCT SPECIFICATION No. DS-1026-2400-102 REV. 0.3 SUBJECT CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PAGE 6 of 35 CUSTOMER’S CODE PAN1026 PANASONIC’S CODE ENW89837AxKF DATE 02.10.2013 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de 6 DETAILED DESCRIPTION 6.1 PAN1026 TERMINAL LAYOUT Top view, Application PCB 6.2 PAN1026 TERMINAL DESCRIPTION 8.70 mm1.35 1.351.2 No Pin Name GPIO Number Pin Type Description A1 GND Ground Pin nd Connect to GrouA2 NC NC Not connected, leave open A3 Reset al Input Digit Reset, active-low A4 VCC Power 2V – 3.6V analog/digital power supply connection A5 VCC Power 2V – 3.6V analog/digital power supply connection A6 VCC Power 2V – 3.6V analog/digital power supply connection A7 GND Ground Pin Connect to Ground A8 NC NC Not Connected A9 GND nd Pin nd Grou Connect to GrouA11 GND Ground Pin Connect to Ground A12 GND Ground Pin Connect to Ground

CLASSIFICATION PRODUCT SPECIFICATION No. DS-1026-2400-102 REV. 0.3 SUBJECT CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PAGE 7 of 35 CUSTOMER’S CODE PAN1026 PANASONIC’S CODE ENW89837AxKF DATE 02.10.2013 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de No Pin Name GPIO Number Pin Type Description B1 NC NC Not connected, leave open B2 BTS PIO 11 G Not supported B3 BTA GPIO 10 Not supported B4 NC NC leave open Not connected,B5 NC NC Not connected, leave open B6 NC NC Not connected, leave open B7 NC NC Not connected, leave open B8 NC NC Not connected, leave open B9 NC NC Not connected, leave open C1 CS0X PIO 17 G Not supported C2 BTI GPIO 13 Not supported C3 WIA GPIO 12 Not supported C4 NC NC leave open Not connected,C5 NC NC Not connected, leave open C6 PCMCLK PIO 04 al I/O G Digit PCM Clock C7 FSYNC GPIO 05 Digital I/O PCM Syncronisation C8 GND Ground Pin Connect to Ground C9 GND Ground Pin Connect to Ground D1 CS1X GPIO 18 Not supported D2 DIN GPIO 16 Not supported D3 GPIO1 igital I/O GPIO 01 D Not supported D4 USB*/GPIO0 Digital I/O t currently supported by the IC and therefore you USB direct is nomay use this pin as normal GPIO0. When USB is supported the, pin will be  Select USB (Connect to PIN E4) Refer to the Related Documents section, item one. [1] D5 NC NC Not connected, leave open D6 PCMIN PIO 03 al Input G Digit PCM In Not supported D7 GND Ground Pin Connect to Ground D8 GND Ground Pin Connect to Ground D9 ANT RF - Signal Antenna Pin (Not connected for standard version) E1 SDA GPIO 15 Digital I/O I2C Interface (Only Internal) Connect to Testpin E2 SCL GPIO 14 Digital I/O I2C Interface (Only Internal) Connect to Testpin E3 VDD_USB Power erefore put this USB direct is not currently supported by the IC thpin to to GND. If USB will be supported in the next revision, connect to VCC. Refer to the Related Documents section, item one. [1] E4 USB* USB direct is not currently supported by the IC Leave this pin open.. Whjen USB is supported the pin would be  Select USB (Connect to PIN D4). Refer to the Related Documents section, item one. [1] E5 CLKREQ Digital Output Active High once crystal frequency is stable E6 UART RXD Digital Input UART RXD E7 PCMOUT GPIO 02 Digital Output PCM Output E8 GND Ground Pin Connect to Ground E9 GND Ground Pin Connect to Ground

CLASSIFICATION PRODUCT SPECIFICATION No. DS-1026-2400-102 REV. 0.3 SUBJECT CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PAGE 8 of 35 CUSTOMER’S CODE PAN1026 PANASONIC’S CODE ENW89837AxKF DATE 02.10.2013 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de No Pin Name GPIO Number Pin Type Description F1 GND Ground Pin Connect to Ground F2 EEPROM_WP rite Protect (Active High) Digital Input Internal EEPROM WF3 USB_P Digital I/O therefore put this USB direct is not currently supported by the ICpin to GND. Whjen USB is supported the pin would be  USB Data In/Out Refer to the Related Documents section, item one. [1] F4 USB_M Digital I/O USB direct is not currently supported by the IC therefore put this pin to GND. Whjen USB is supported the pin would be  USB Data In/Out Refer to the Related Documents section, item one. [1] F5 UART CTS Digital Input UART CTS F6 SLEEPCLK Digital Input Input Clock for 32.768KHz F7 UARTTXD Digital Output UART TX F8 UARTRTS Digital Output UART RTS F9 GND Ground Pin Connect to Ground F11 GND Ground Pin Connect to Ground F12 GND Ground Pin Connect to Ground 6.3 UART INTERFACE 6.3.1 Features  Full-duplex 4-wire data transfer: RX, TX, RTS, CTS ps Character timeout, Overrun error, Framing error C35661 UART interface is used to transfer control command and data and is multiplexed  Programmable baud rate: 2400bps to 4.33 Mb Data format (No parity bit): LSB first  Start bit (1-bit)  Data bit (8-bit):  Stop bit (1-bit)  Error detection: Twith GPIO pin. After the release reset state, TC35661 firmware sets UART interface mode to the related GPIO pins. The default bit rate depends on the selection ROM version. (e.g. TC35661-501: 115,2kbps)

CLASSIFICATION PRODUCT SPECIFICATION No. DS-1026-2400-102 REV. 0.3 SUBJECT CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PAGE 9 of 35 CUSTOMER’S CODE PAN1026 PANASONIC’S CODE ENW89837AxKF DATE 02.10.2013 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de 6.3.2 Connection Example UART connection example Power-up sequence for UART configuration Reset UART Transmit data UART Receive data UART Transmit flow control Reset GPIO Configuration (Pulled-up/ input) UART Communication Output direction Input direction Output direction Input direction UART Receive flow control TC35661 UART Receive flow control (RTS) UART Transmit flow control (CTS) UART Receive data (RX) UART Transmit data (TX) HOST CPU

CLASSIFICATION PRODUCT SPECIFICATION No. DS-1026-2400-102 REV. 0.3 SUBJECT CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PAGE 10 of 35 CUSTOMER’S CODE PAN1026 PANASONIC’S CODE ENW89837AxKF DATE 02.10.2013 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de 6.3.3 Frame Format TC35661 supporting format is as follows.  Number of data bits: 8 bits  Parity bit: no parity  Stop bit: 1 stop bit  Flow control: RTS/CTS UART data frame 6.3.4 Flow Control Function TC35661 UART interface uses flow control function by hardware signal, Transmit flow control (CTSX) and receive flow control (RTSX). Above Figure shows signals input and output direction . CTSX input signal is used for UART transmitting. Low input indicates close of the preparation of the other party to receive data and TC35661 executes UART transmitting data if there is data for transmission. In case of input high level, TC35661 stops transmitting by UART frame. RTSX input signal is used for UART receiving. Low output indicates request data transmission to UART transmit side device of the other party. TC35661 outputs Low level from RTSX when being able to receive data and prepares to receive data. Response time of UART transmitting and receiving for flow control signal depends on baud rate and internal process status of frame. It is from 1 frame to 4 frames. 6.3.5 UART Baud Rate Setting TC35661 UART interface has a programmable baud rate setting function. The UART baud rate can be set according to the following equation. The baud rate generating clock frequency is set to either 39 MHz or 52 MHz. The over-sampling number is set to an integer UART Transmit data UART Transmit flow control 1 LSB 2 3 4 5 6 MSB Start bit Stop bit 1 23456789 1UART Receive flow control UART Receive data 1 LSB 2 3 4 5 6 MSB Start bit Stop bit OverSampling (*12 to17) /bit

CLASSIFICATION PRODUCT SPECIFICATION No. DS-1026-2400-102 REV. 0.3 SUBJECT CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PAGE 11 of 35 CUSTOMER’S CODE PAN1026 PANASONIC’S CODE ENW89837AxKF DATE 02.10.2013 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de that ranges from 12 to 17. The dividing ratio is set to an integer that ranges from 1 to 65,535. RatioDividingNumberSamplingOverFrequencyClockGeneratingRateBaudBaudRateUART 　　 Table 6-1 shows examples of UART Baud rate setting. The maximum of the actual baud rate is 4,333,333 [bps]. If other target baud rates are required, please contact our engineering department. Table 6-1 UART Baudrate setting Target baud rate [bps] Actual baud rate [bps] Baud rate generating clock frequency [MHz] Over-samplingnumber Dividing ratio Deviation [%] 115,200 116,071 39 12 28 +0.7564 115,200 116,071 52 14 32 +0.7564 921,600 928,571 39 14 3 +0.7564 921,600 928,571 52 14 4 +0.7564 1,843,200 1,875,143 52 14 2 +0.7564 2,764,800 2,785,714 39 14 1 +0.7564 4,329,600 4,333,333 52 12 1 +0.0862 6.3.6 Error Detect Function TC35661 UART interface has 3 kinds of error functions.  Receiver timeout error  Receiver over run error  Receiver frame error Receiver timeout error reports as an error if the receiver frame intreval counted by TC35661 internal timer is equal to or greater than a predetermined time Receiver over run error is reported if UART internal receive frame buffer TC35661 is overflowed. Receiver frame error is reported if it fails to recognize the unit frame.

CLASSIFICATION PRODUCT SPECIFICATION No. DS-1026-2400-102 REV. 0.3 SUBJECT CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PAGE 12 of 35 CUSTOMER’S CODE PAN1026 PANASONIC’S CODE ENW89837AxKF DATE 02.10.2013 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de 7 BLUETOOTH FEATURES  Bluetooth 4.0 with SPP & GATT  GAP support for SPP  GATT Server and Client Mode are supported for LE  Class 2 TX power w/o external PA, improving link robustness.  Excellent link budget (up to 91 dB), enabling long-range applications.  GAP peripheral support for LE Note:  For GAP Broadcaster and Peripheral role are supported  Observer and Central is not supported on GAP  For GATT Server and Client Mode are supported 8 BLOCK DIAGRAM

CLASSIFICATION PRODUCT SPECIFICATION No. DS-1026-2400-102 REV. 0.3 SUBJECT CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PAGE 13 of 35 CUSTOMER’S CODE PAN1026 PANASONIC’S CODE ENW89837AxKF DATE 02.10.2013 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de 9 TEST CONDITIONS Measurements shall be made under operating free-air temperature range unless otherwise specified. Temperature 25 ± 10°C Humidity 40 to 85%RH Supply Voltage 3.3V 10 GENERAL DEVICE REQUIREMENTS AND OPERATION All specifications are over temperature and process, unless indicated otherwise. 10.1 ABSOLUTE MAXIMUM RATINGS No See 2 Value Unit Ratings Over Operating Free-Air Temperature Range 1 Voltage on any digital pin –0.3 to VDD+0.3 V 2 Operating ambient temperature range –40 to 85 °C 3 Storage temperature range –40 to 125 °C 4 Bluetooth RF inputs 10 dBm 5 ESD: All pads, according to human-body model, JEDEC STD 22, method A114 According to charged-device model, JEDEC STD 22, method C101 1000 500 V 10.2 RECOMMENDED OPERATING CONDITIONS No Rating Min Typ Max Unit 1 Power supply voltage 1.7 1.8 1.9 V 1 Power supply voltage 2.7 3.3 3.6 V 2 Maximum ambient operating temperature -40 85 C 2 Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

CLASSIFICATION PRODUCT SPECIFICATION No. DS-1026-2400-102 REV. 0.3 SUBJECT CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PAGE 14 of 35 CUSTOMER’S CODE PAN1026 PANASONIC’S CODE ENW89837AxKF DATE 02.10.2013 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de 10.3 CURRENT CONSUMPTION The current consumption is dependent on the user scenario and the setup and timing in the low power modes. No Characteristics Condition Min Typ Max Unit 1 Idle Current After reset was pulled down. 7.8 mA 2 During Connection Sending 3-DH5 packets. Max. output power. 62 mA 3 During Connection Sending DH5 packets. Max. output power. 62 mA 4 During Connection Sending DH3 packets. Max. output power. 61 mA 5 During Connection Sending DH1 packets. Max. output power. 55 mA

CLASSIFICATION PRODUCT SPECIFICATION No. DS-1026-2400-102 REV. 0.3 SUBJECT CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PAGE 15 of 35 CUSTOMER’S CODE PAN1026 PANASONIC’S CODE ENW89837AxKF DATE 02.10.2013 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de 11 BLUETOOTH RF PERFORMANCE 11.1 BLUETOOTH CHARACTERISTICS No Characteristics Condition Min Typ Max BT Spec Unit 1 Operation frequency range 2402 2480 MHz 2 Channel spacing BT-Classic/BLE 1/2 MHz 3 Output Power Maximum setting, measured at dual ended 50ohm. 4 dBm 4 Sensitivity -88 dBm No Characteristics Condition Typ Max Unit 1 Spurious emissions Conducted measurement with a 50-Ω dual-ended load. Complies with EN 300 328, EN 300 440 class 2, FCC CFR47, Part 15 and ARIB STD-T-66 <-30 dBm

CLASSIFICATION PRODUCT SPECIFICATION No. DS-1026-2400-102 REV. 0.3 SUBJECT CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PAGE 17 of 35 CUSTOMER’S CODE PAN1026 PANASONIC’S CODE ENW89837AxKF DATE 02.10.2013 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de 13 MODULE DIMENSION No. Item Dimension Tolerance Remark 1 Width 8.70  0.20 2 Length 15.60  0.20 3 Height 1.80  0.20 With case

CLASSIFICATION PRODUCT SPECIFICATION No. DS-1026-2400-102 REV. 0.3 SUBJECT CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PAGE 18 of 35 CUSTOMER’S CODE PAN1026 PANASONIC’S CODE ENW89837AxKF DATE 02.10.2013 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de 14 PAN1026 FOOTPRINT OF THE MODULE All dimensions are in millimeters. The outer dimensions have a tolerance of  0.2mm. Top view, Application PCB F2 F3 F4 F5E1 E2 E3 E4 E5 E6 E7 E8 E9D1 D2 D3 D4 D5 D6 D7 D8C1 C2 C3 C4 C5 C6 C7 C8B1 B2 B3 B4 B5 B6 B7 B8 B9A2 A3 A4 A5 A6 A7 A8A11.0 0.65.00.6F91.2F7F1 F8D9C9A915.6 mmF6 F11A11F12A122.4

CLASSIFICATION PRODUCT SPECIFICATION No. DS-1026-2400-102 REV. 0.3 SUBJECT CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PAGE 20 of 35 CUSTOMER’S CODE PAN1026 PANASONIC’S CODE ENW89837AxKF DATE 02.10.2013 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de 17 RELIABILITY TESTS The measurement should be done after being exposed to room temperature and humidity for 1 hour. No. Item Limit Condition 1 Vibration test Electrical parameter should be in specification a) Freq.:10~50Hz,Amplitude:1.5mm a) 20min. / cycle,1hrs. each of XYZ axis b) Freq.:30~100Hz, 6G b) 20min. / cycle,1hrs. each of XYZ axis 2 Shock test the same as above Dropped onto hard wood from height of 50cm for 3 times3 Heat cycle test the same as above -40°C for 30min. and +85°C for 30min.; each temperature 300 cycles 4 Moisture test the same as above +60°C, 90% RH, 300h 5 Low temp. test the same as above -40°C, 300h 6 High temp. test the same as above +85°C, 300h 18 CAUTIONS Failure to follow the guidelines set forth in this document may result in degrading of the product’s functions and damage to the product. 18.1 DESIGN NOTES (1) Follow the conditions written in this specification, especially the control signals of this module. (2) The supply voltage has to be free of AC ripple voltage (for example from a battery or a low noise regulator output). For noisy supply voltages, provide a decoupling circuit (for example a ferrite in series connection and a bypass capacitor to ground of at least 47uF directly at the module). (3) This product should not be mechanically stressed when installed. (4) Keep this product away from heat. Heat is the major cause of decreasing the life of these products. (5) Avoid assembly and use of the target equipment in conditions where the products' temperature may exceed the maximum tolerance. (6) The supply voltage should not be exceedingly high or reversed. It should not carry noise and/or spikes. (7) Keep this product away from other high frequency circuits.

CLASSIFICATION PRODUCT SPECIFICATION No. DS-1026-2400-102 REV. 0.3 SUBJECT CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PAGE 22 of 35 CUSTOMER’S CODE PAN1026 PANASONIC’S CODE ENW89837AxKF DATE 02.10.2013 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de 18.4 STORAGE NOTES (1) The module should not be stressed mechanically during storage. (2) Do not store these products in the following conditions or the performance characteristics of the product, such as RF performance will be adversely affected:  Storage in salty air or in an environment with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NOX  Storage in direct sunlight  Storage in an environment where the temperature may be outside the range of 5°C to 35°C range, or where the humidity may be outside the 45 to 85% range.  Storage of the products for more than one year after the date of delivery Storage period: Please check the adhesive strength of the embossed tape and soldering after 6 months of storage. (3) Keep this product away from water, poisonous gas and corrosive gas. (4) This product should not be stressed or shocked when transported. (5) Follow the specification when stacking packed crates (max. 10). 18.5 SAFETY CAUTIONS These specifications are intended to preserve the quality assurance of products and individual components. Before use, check and evaluate the operation when mounted on your products. Abide by these specifications, without deviation when using the products. These products may short-circuit. If electrical shocks, smoke, fire, and/or accidents involving human life are anticipated when a short circuit occurs, then provide the following failsafe functions, as a minimum. (1) Ensure the safety of the whole system by installing a protection circuit and a protection device. (2) Ensure the safety of the whole system by installing a redundant circuit or another system to prevent a dual fault causing an unsafe status. 18.6 OTHER CAUTIONS (1) This specification sheet is copyrighted. Reproduction of this data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. (2) Do not use the products for other purposes than those listed. (3) Be sure to provide an appropriate fail-safe function on your product to prevent an additional damage that may be caused by the abnormal function or the failure of the product. (4) This product has been manufactured without any ozone chemical controlled under the Montreal Protocol. (5) These products are not intended for other uses, other than under the special conditions shown below. Before using these products under such special conditions, check their performance and reliability under the said special conditions carefully to determine whether or not they can be used in such a manner.  In liquid, such as water, salt water, oil, alkali, or organic solvent, or in places where liquid may splash.

CLASSIFICATION PRODUCT SPECIFICATION No. DS-1026-2400-102 REV. 0.3 SUBJECT CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PAGE 23 of 35 CUSTOMER’S CODE PAN1026 PANASONIC’S CODE ENW89837AxKF DATE 02.10.2013 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de  In direct sunlight, outdoors, or in a dusty environment  In an environment where condensation occurs.  In an environment with a high concentration of harmful gas (e.g. salty air, HCl, Cl2, SO2, H2S, NH3, and NOX) (6) If an abnormal voltage is applied due to a problem occurring in other components or circuits, replace these products with new products because they may not be able to provide normal performance even if their electronic characteristics and appearances appear satisfactory. (7) When you have any question or uncertainty, contact Panasonic.

CLASSIFICATION PRODUCT SPECIFICATION No. DS-1026-2400-102 REV. 0.3 SUBJECT CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PAGE 24 of 35 CUSTOMER’S CODE PAN1026 PANASONIC’S CODE ENW89837AxKF DATE 02.10.2013 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de 19 PACKAGING If the product has mass production status, indicated in chapter 25, we will deliver the module in the package which are described below. 19.1 TAPE DIMENSION 19.2 PACKING IN TAPE Empty spaces in component packed area shall be less than two per reel and those spaces shall not be consecutive. Top cover tape shall not be found on reel holes and shall not stick out from reel.

CLASSIFICATION PRODUCT SPECIFICATION No. DS-1026-2400-102 REV. 0.3 SUBJECT CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PAGE 25 of 35 CUSTOMER’S CODE PAN1026 PANASONIC’S CODE ENW89837AxKF DATE 02.10.2013 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de 19.3 COMPONENT DIRECTION 19.4 REEL DIMENSION

CLASSIFICATION PRODUCT SPECIFICATION No. DS-1026-2400-102 REV. 0.3 SUBJECT CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PAGE 26 of 35 CUSTOMER’S CODE PAN1026 PANASONIC’S CODE ENW89837AxKF DATE 02.10.2013 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de 19.5 LABEL FOR PACKAGE The picture shows an example from similar product. PAN1315Customer Code ENW89818C2JF105 mm (1T) Lot code [YYWWDLL] Example from above: YY year printed 08 WW normal calendar week printed 01 D day printed 5 (Friday) L line identifier, if more as one printed 1 L lot identifier per day printed 1 (1P) Customer Order Code, if any, otherwise company name will be printed (2P) Panasonic Order Code: ENW89837AxKF (9D) Date code as [YYWW] (Q) Quantity [XXXX], variable max. 1500 (HW/SW) Hardware /Software Release Hardware 01 Indicates the HW revision. Software 01 Indicates the SW revision. 19.6 TOTAL PACKAGE

CLASSIFICATION PRODUCT SPECIFICATION No. DS-1026-2400-102 REV. 0.3 SUBJECT CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PAGE 27 of 35 CUSTOMER’S CODE PAN1026 PANASONIC’S CODE ENW89837AxKF DATE 02.10.2013 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de 20 ORDERING INFORMATION Ordering part number Description MOQ (1) ENW89837A3KF (2) PAN1026 CLASS 2 Bluetooth dual mode Module according BT-4.0. 115kBaud Standard Bluetooth® smart ready device 1500 ENW89837A8KF PAN1026 CLASS 2 Bluetooth dual mode Module according BT-4.0. 9k6Baud Bluetooth® smart ready device 1500 Notes: (1) Abbreviation for Minimum Order Quantity (MOQ). The standard MOQ for mass production is 1500 pieces, fewer only on customer demand. Samples for evaluation can be delivered at any quantity via the distribution channels. (2) Samples are available on customer demand 21 INFORMATION REGARDING SOFTWARE VERSIONS The version number of the embedded software can be read out by an extended HCI command. The extended HCI command class < HCI_M2_Message_Get >" allows the reading of the firmware version. Pls refer to the extended HCI command list of TC35661 LSI.

CLASSIFICATION PRODUCT SPECIFICATION No. DS-1026-2400-102 REV. 0.3 SUBJECT CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PAGE 29 of 35 CUSTOMER’S CODE PAN1026 PANASONIC’S CODE ENW89837AxKF DATE 02.10.2013 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de 23 SOFTWARE BLOCK DIAGRAM

CLASSIFICATION PRODUCT SPECIFICATION No. DS-1026-2400-102 REV. 0.3 SUBJECT CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PAGE 30 of 35 CUSTOMER’S CODE PAN1026 PANASONIC’S CODE ENW89837AxKF DATE 02.10.2013 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de 24 ROHS AND REACH DECLARATION Hereby we declare to our best present knowledge based on declaration of our suppliers that this product follows the latest official RoHS and REACH Directive. For the most updated one, please refer to [5].

CLASSIFICATION PRODUCT SPECIFICATION No. DS-1026-2400-102 REV. 0.3 SUBJECT CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PAGE 31 of 35 CUSTOMER’S CODE PAN1026 PANASONIC’S CODE ENW89837AxKF DATE 02.10.2013 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de 25 DATA SHEET STATUS This data sheet contains the preliminary specification. Panasonic reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Please consult the most recently issued data sheet before initiating or completing a design. Use this URL to search for the most recent version of this data sheet: PAN1026 Datasheet 26 HISTORY FOR THIS DOCUMENT Revision Date Modification / Remarks 0.1 November 2012 1st preliminary version. 0.2 January 2013 Update chapter 24 with the latest declaration. Correct chapter 10.3 with the latest current values measured on the reference design. Made the description for the USB ports in chapter 6.2 more precised. 0.3 October 2013 Editoral changes. 27 RELATED DOCUMENTS For an update, please search in the suitable homepage. [1] PAN1026ETU Design-Guide http://www.pideu.panasonic.de/pdf/185ApplicationNote.pdf [2] EasySPP Evaluation Software http://pideu.panasonic.de/pdf/185ext.zip [3] Semiconductor Website: http://www.toshiba-components.com/bluetooth/index.html [4] Application Note Land Grid Array http://www.pideu.panasonic.de/pdf/184ext.pdf [5] REACH and RoHS Certificate http://www.pideu.panasonic.de/pdf/182ext2.jpg

CLASSIFICATION PRODUCT SPECIFICATION No. DS-1026-2400-102 REV. 0.3 SUBJECT CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PAGE 32 of 35 CUSTOMER’S CODE PAN1026 PANASONIC’S CODE ENW89837AxKF DATE 02.10.2013 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de 28 GENERAL INFORMATION © Panasonic Industrial Devices Europe GmbH 2012. All rights reserved. This product description does not lodge the claim to be complete and free of mistakes. Please contact the related product manager in every case. If we deliver ES samples to the customer, these samples have the status Engineering Samples. This means, the design of this product is not yet concluded. Engineering Samples may be partially or fully functional, and there may be differences to be published Data Sheet. Engineering Samples are not qualified and are not to be used for reliability testing or series production. Disclaimer: Customer acknowledges that samples may deviate from the Data Sheet and may bear defects due to their status of development and the lack of qualification mentioned above. Panasonic rejects any liability or product warranty for Engineering Samples. In particular, Panasonic disclaims liability for damages caused by  the use of the Engineering Sample other than for Evaluation Purposes, particularly the installation or integration in an other product to be sold by Customer,  deviation or lapse in function of Engineering Sample,  Improper use of Engineering Samples. Panasonic disclaimes any liability for consequential and incidental damages. In case of any questions, please contact your local sales partner or the related product manager. 29 REGULATORY INFORMATION 29.1 FCC NOTICE The devices PAN1026, for details refer to Chapter 20, including the antennas, which are listed in 29.5, complies with Part 15 of the FCC Rules. The device meets the requirements for modular transmitter approval as detailed in FCC public Notice DA00-1407.transmitter Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 29.2 CAUTION The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Panasonic Industrial Devices Europe GmbH may void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

CLASSIFICATION PRODUCT SPECIFICATION No. DS-1026-2400-102 REV. 0.3 SUBJECT CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PAGE 33 of 35 CUSTOMER’S CODE PAN1026 PANASONIC’S CODE ENW89837AxKF DATE 02.10.2013 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help 29.3 LABELING REQUIREMENTS The Original Equipment Manufacturer (OEM) must ensure that FCC labelling requirements are met. This includes a clearly visible label on the outside of the OEM enclosure specifying the appropriate Panasonic FCC identifier for this product as well as the FCC Notice above. The FCC identifier is FCC ID: T7VPAN10. This FCC identifier is valid for all PAN1026 modules, for details, see the Chapter 20 - Ordering Information. In any case the end product must be labelled exterior with "Contains FCC ID: T7VPAN10" 29.4 ANTENNA WARNING For the related part number of PAN1026 refer to Chapter 20 - Ordering Information. This device is tested with a standard SMA connector and with the antennas listed below. When integrated in the OEMs product, these fixed antennas require installation preventing end-users from replacing them with non-approved antennas. Any antenna not in the following table must be tested to comply with FCC Section 15.203 for unique antenna connectors and Section 15.247 for emissions. 29.5 APPROVED ANTENNA LIST Note: We are able to qualify your antenna and will add to this list as that process is completed. Item Part Number Manufacturer Frequency Band Type Gain (dBi) 1 LDA212G3110K Murata 2.4GHz Chip-Antenna +0.9 29.6 RF EXPOSURE PAN1026 To comply with FCC RF Exposure requirements, the Original Equipment Manufacturer (OEM) must ensure that the approved antenna in the previous table must be installed. The preceding statement must be included as a CAUTION statement in manuals for products operating with the approved antennas in the previous table to alert users on FCC RF Exposure compliance. Any notification to the end user of installation or removal instructions about the integrated radio module is not allowed. The radiated output power of PAN1026 with mounted ceramic antenna (FCC ID: T7VPAN10) is far below the FCC radio frequency exposure limits. Nevertheless, the PAN1026 shall be used in such a manner that the potential for human contact during normal operation is minimized. End users may not be provided with the module installation instructions. OEM integrators and end users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

CLASSIFICATION PRODUCT SPECIFICATION No. DS-1026-2400-102 REV. 0.3 SUBJECT CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PAGE 34 of 35 CUSTOMER’S CODE PAN1026 PANASONIC’S CODE ENW89837AxKF DATE 02.10.2013 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de 30 INDUSTRY CANADA CERTIFICATION PAN1026 is licensed to meet the regulatory requirements of Industry Canada (IC), license: IC: 216Q-PAN10 Manufacturers of mobile, fixed or portable devices incorporating this module are advised to clarify any regulatory questions and ensure compliance for SAR and/or RF exposure limits. Users can obtain Canadian information on RF exposure and compliance from www.ic.gc.ca. This device has been designed to operate with the antennas listed in Table 20 above, having a maximum gain of 0.9 dBi. Antennas not included in this list or having a gain greater than 0.9 dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Due to the model size the IC identifier is displayed in the installation instruction only and can not be displayed on the modules label due to the limited size (8.7x15.6mm). 30.1 IC NOTICE The devices PAN1026, for details refer to Chapter 20, including the antennas, which are listed in 29.5, complies with Canada RSS-GEN Rules. The device meets the requirements for modular transmitter approval as detailed in RSS-GEN. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 30.2 LABELING REQUIREMENTS The Original Equipment Manufacturer (OEM) must ensure that IC labelling requirements are met. This includes a clearly visible label on the outside of the OEM enclosure specifying the appropriate Panasonic IC identifier for this product as well as the IC Notice above. The IC identifier is 216Q-PAN10. This IC identifier is valid for all PAN1026 modules, for details, see the Chapter 20 - Ordering Information. In any case the end product must be labelled exterior with "Contains IC: 216Q-PAN10" 31 EUROPEAN R&TTE DECLARATION OF CONFORMITY Hereby, Panasonic Industrial Devices Europe GmbH, declares that the Bluetooth module PAN1026 and their versions is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. As a result of the conformity assessment procedure described in Annex III of the Directive 1999/5/EC, the end-customer equipment should be labelled as follows: All versions of the PAN1026 in the specified reference design can be used in the following countries: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, The Netherlands, the United Kingdom, Switzerland, and Norway.

CLASSIFICATION PRODUCT SPECIFICATION No. DS-1026-2400-102 REV. 0.3 SUBJECT CLASS 2 BLUETOOTH LOW ENERGY SPP MODULE PAGE 35 of 35 CUSTOMER’S CODE PAN1026 PANASONIC’S CODE ENW89837AxKF DATE 02.10.2013 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de 32 LIFE SUPPORT POLICY This Panasonic product is not designed for use in life support appliances, devices, or systems where malfunction can reasonably be expected to result in a significant personal injury to the user, or as a critical component in any life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Panasonic customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panasonic for any damages resulting.