Panasonic Devices Europe PAN10 Bluetooth Module User Manual TABLE OF CONTENTS

Panasonic Industrial Devices Europe GmbH Bluetooth Module TABLE OF CONTENTS

Contents

15_ENW89837AxKF UserMan

CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 1 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
Power Electronics R&D Center
Wireless Connectivity
Panasonic Industrial Devices Europe GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
Product Specification
Panasonic Industrial Devices Europe GmbH
Zeppelinstrasse 19
21337 Lüneburg
Applicant / Manufacturer
Hardware
Germany
TOSHIBA Electronics Europe GmbH
Hansaallee 181
40549 Düsseldorf
Applicant / Manufacturer
Software
Germany
Software Version Please refer to chapter 20 / 21
By purchase of any of products described in this document the customer accepts the document's
validity and declares their agreement and understanding of its contents and recommendations.
Panasonic reserves the right to make changes as required without notification.
CHECKED / APPROVED:
Company:
DATE: NAME: SIGNATURE:
NOTE:
AT LEAST ONE SET OF APPROVED SPECIFICATIONS SHOULD BE RETURNED TO THE
ADDRESS OF THE ISSUING PARTY.
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 2 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
TABLE OF CONTENTS
1 ..................................................................................................4 Scope of this Document
2 Key Features...................................................................................................................4
3 Bluetooth Low Energy.....................................................................................................5
4 Applications for the Module.............................................................................................5
5 Description for the Module ..............................................................................................5
6 Detailed Description........................................................................................................6
6.1 PAN1026 Terminal Layout..................................................................................... 6
6.2 PAN1026 Terminal Description .............................................................................6
6.3 UART Interface ......................................................................................................8
6.3.1 Features ...................................................................................................8
6.3.2 Connection Example ................................................................................9
6.3.3 Frame Format......................................................................................... 10
6.3.4 Flow Control Function ............................................................................10
6.3.5 UART Baud Rate Setting .......................................................................10
6.3.6 Error Detect Function .............................................................................11
7 Bluetooth Features........................................................................................................12
8 Block Diagram...............................................................................................................12
9 Test Conditions .............................................................................................................13
10 General Device Requirements and Operation .............................................................. 13
10.1 Absolute Maximum Ratings ................................................................................. 13
10.2 Recommended Operating Conditions..................................................................13
10.3 Current Consumption........................................................................................... 14
11 Bluetooth RF Performance............................................................................................15
11.1 Bluetooth Characteristics.....................................................................................15
12 Soldering Temperature-Time Profile (for reflow soldering) ........................................... 16
13 Module Dimension ........................................................................................................17
14 PAN1026 FootPrint of the Module ................................................................................ 18
15 Case Marking................................................................................................................19
15.1 Example for Marking............................................................................................19
15.2 Marking Definition ................................................................................................19
16 Mechanical Requirements............................................................................................. 19
17 Reliability Tests.............................................................................................................20
18 Cautions........................................................................................................................20
18.1 Design Notes .......................................................................................................20
18.2 Installation Notes .................................................................................................21
18.3 Usage Conditions Notes ......................................................................................21
18.4 Storage Notes......................................................................................................22
18.5 Safety Cautions ...................................................................................................22
18.6 Other cautions .....................................................................................................22
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 3 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
19 Packaging .....................................................................................................................24
19.1 Tape Dimension................................................................................................... 24
19.2 Packing in Tape ...................................................................................................24
19.3 Component Direction ...........................................................................................25
19.4 Reel Dimension ...................................................................................................25
19.5 Label for Package................................................................................................26
19.6 Total Package...................................................................................................... 26
20 Ordering Information .....................................................................................................27
21 Information regarding Software Versions......................................................................27
22 Software........................................................................................................................28
23 Software block diagram.................................................................................................29
24 RoHS and REACH Declaration..................................................................................... 30
25 Data Sheet Status.........................................................................................................31
26 History for this Document..............................................................................................31
27 Related Documents.......................................................................................................31
28 General Information ...................................................................................................... 32
29 Regulatory Information..................................................................................................32
29.1 FCC Notice ..........................................................................................................32
29.2 Caution ................................................................................................................32
29.3 Labeling Requirements........................................................................................ 33
29.4 Antenna Warning .................................................................................................33
29.5 Approved Antenna List ........................................................................................33
29.6 RF Exposure PAN1026 .......................................................................................33
30 Industry Canada Certification........................................................................................34
30.1 IC Notice ..............................................................................................................34
30.2 Labeling Requirements........................................................................................ 34
31 European R&TTE Declaration of Conformity ................................................................ 34
32 Life Support Policy ........................................................................................................35
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 4 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
1 SCOPE OF THIS DOCUMENT
This product specification applies to Panasonic’s, Class 2, Bluetooth®1 classic and low energy
dual mode module, series number: PAN1026.
2 KEY FEATURES
Bluetooth Classic and BLE (Dual Mode) support
Bluetooth Classic 2.1 embedded SPP profile with high level API commands
Bluetooth 4.0 (LE) embedded GATT profile with high level API commands, compatible to
Toshiba reference BLE profiles
Operational Temperature Range -40 / 85 degree C
Operational Voltage 1.8V or 3.0V +/- 10%
Dimension 15,6*8,7*1,9mm3
Internal crystal oscillator (26MHz)
Integrated shielding to resist EMI
No external components needed
High sensitivity (-88 dBm typ.)
Tx power control up to a maximum of 4.0 dBm (typical)
1 Bluetooth is a registered trademark of the Bluetooth Special Interest Group.
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 5 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
3 BLUETOOTH LOW ENERGY
Bluetooth Low Energy (BLE) is a part of Bluetooth Ver. 4.0, BT 4.0 covers both BLE as well as
BT classic 2.1 and 3.0. If both are implemented in one device it is called dual mode. Dual mode
chips implement the low energy specification,providing connectivity to coin cell battery
applications. Dual mode combines low energy with the power of classic Bluetooth and are likely
to become a de facto feature in almost all new Bluetooth enabled cellular phones,computers or
portable communication nodes.
Bluetooth Low Energy (BLE) is not backwards compatible with previous Bluetooth classic
standards (2.1+EDR or 3.0). Dual mode Bluetooth 4.0 is backwards compatible but is not practical
for low power devices but targeted to gateway products
4 APPLICATIONS FOR THE MODULE
All Embedded Wireless Applications
Access Points Proximity
Industrial Control Smart Phone
Medical Access Points
Scanners Temperature
Wireless Sensors Wellness
Low Power Sports
5 DESCRIPTION FOR THE MODULE
The PAN1026 is a short-range Class 2 BLE dual mode module for implementing Bluetooth
functionality into various electronic devices. A block diagram can be found in chapter 8.
Please contact your local sales office for further details on additional options and services:
www.panasonic.com/rfmodules for the US,
http://industrial.panasonic.com/eu/i/29606/wireless_modules/wireless_modules.htmlfor EU
or write an e-mail to wireless@eu.panasonic.com.
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 6 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
6 DETAILED DESCRIPTION
6.1 PAN1026 TERMINAL LAYOUT
Top view, Application PCB
6.2 PAN1026 TERMINAL DESCRIPTION
8.70 mm
1.35 1.35
1.2
No Pin Name GPIO Number Pin Type Description
A1 GND Ground Pin nd Connect to Grou
A2 NC NC Not connected, leave open
A3 Reset al Input
Digit Reset, active-low
A4 VCC Power 2V – 3.6V analog/digital power supply connection
A5 VCC Power 2V – 3.6V analog/digital power supply connection
A6 VCC Power 2V – 3.6V analog/digital power supply connection
A7 GND Ground Pin Connect to Ground
A8 NC NC Not Connected
A9 GND nd Pin nd
Grou Connect to Grou
A11 GND Ground Pin Connect to Ground
A12 GND Ground Pin Connect to Ground
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 7 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
No Pin Name GPIO Number Pin Type Description
B1 NC NC Not connected, leave open
B2 BTS PIO 11 G Not supported
B3 BTA GPIO 10 Not supported
B4 NC NC leave open Not connected,
B5 NC NC Not connected, leave open
B6 NC NC Not connected, leave open
B7 NC NC Not connected, leave open
B8 NC NC Not connected, leave open
B9 NC NC Not connected, leave open
C1 CS0X PIO 17 G Not supported
C2 BTI GPIO 13 Not supported
C3 WIA GPIO 12 Not supported
C4 NC NC leave open Not connected,
C5 NC NC Not connected, leave open
C6 PCMCLK PIO 04 al I/O G Digit PCM Clock
C7 FSYNC GPIO 05 Digital I/O PCM Syncronisation
C8 GND Ground Pin Connect to Ground
C9 GND Ground Pin Connect to Ground
D1 CS1X GPIO 18 Not supported
D2 DIN GPIO 16 Not supported
D3 GPIO1 igital I/O GPIO 01 D Not supported
D4 USB*/GPIO0 Digital I/O
t currently supported by the IC and therefore you USB direct is no
may use this pin as normal GPIO0.
When USB is supported the, pin will be Select USB (Connect
to PIN E4)
Refer to the Related Documents section, item one. [1]
D5 NC NC Not connected, leave open
D6 PCMIN PIO 03 al Input G Digit PCM In Not supported
D7 GND Ground Pin Connect to Ground
D8 GND Ground Pin Connect to Ground
D9 ANT RF - Signal Antenna Pin (Not connected for standard version)
E1 SDA GPIO 15 Digital I/O I2C Interface (Only Internal) Connect to Testpin
E2 SCL GPIO 14 Digital I/O I2C Interface (Only Internal) Connect to Testpin
E3 VDD_USB Power
erefore put this USB direct is not currently supported by the IC th
pin to to GND.
If USB will be supported in the next revision, connect to VCC.
Refer to the Related Documents section, item one. [1]
E4 USB*
USB direct is not currently supported by the IC Leave this pin
open..
Whjen USB is supported the pin would be Select USB
(Connect to PIN D4).
Refer to the Related Documents section, item one. [1]
E5 CLKREQ Digital Output Active High once crystal frequency is stable
E6 UART RXD Digital Input UART RXD
E7 PCMOUT GPIO 02 Digital Output PCM Output
E8 GND Ground Pin Connect to Ground
E9 GND Ground Pin Connect to Ground
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 8 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
No Pin Name GPIO Number Pin Type Description
F1 GND Ground Pin Connect to Ground
F2 EEPROM_WP rite Protect (Active High)
Digital Input Internal EEPROM W
F3 USB_P Digital I/O
therefore put this USB direct is not currently supported by the IC
pin to GND.
Whjen USB is supported the pin would be USB Data In/Out
Refer to the Related Documents section, item one. [1]
F4 USB_M
Digital I/O
USB direct is not currently supported by the IC therefore put this
pin to GND.
Whjen USB is supported the pin would be USB Data In/Out
Refer to the Related Documents section, item one. [1]
F5 UART CTS Digital Input UART CTS
F6 SLEEPCLK Digital Input Input Clock for 32.768KHz
F7 UARTTXD Digital Output UART TX
F8 UARTRTS Digital Output UART RTS
F9 GND Ground Pin Connect to Ground
F11 GND Ground Pin Connect to Ground
F12 GND Ground Pin Connect to Ground
6.3 UART INTERFACE
6.3.1 Features
Full-duplex 4-wire data transfer: RX, TX, RTS, CTS
ps
Character timeout, Overrun error, Framing error
C35661 UART interface is used to transfer control command and data and is multiplexed
Programmable baud rate: 2400bps to 4.33 Mb
Data format (No parity bit): LSB first
Start bit (1-bit)
Data bit (8-bit):
Stop bit (1-bit)
Error detection:
T
with GPIO pin. After the release reset state, TC35661 firmware sets UART interface mode
to the related GPIO pins. The default bit rate depends on the selection ROM version. (e.g.
TC35661-501: 115,2kbps)
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 9 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
6.3.2 Connection Example
UART connection example
Power-up sequence for UART configuration
Reset
UART Transmit data
UART Receive data
UART Transmit flow control Reset GPIO Configuration
(Pulled-up/ input) UART Communication
Output direction
Input direction
Output direction
Input direction
UART Receive flow
control
TC35661 UART Receive flow control (RTS)
UART Transmit flow control (CTS)
UART Receive data (RX)
UART Transmit data (TX)
HOST CPU
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 10 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
6.3.3 Frame Format
TC35661 supporting format is as follows.
Number of data bits: 8 bits
Parity bit: no parity
Stop bit: 1 stop bit
Flow control: RTS/CTS
UART data frame
6.3.4 Flow Control Function
TC35661 UART interface uses flow control function by hardware signal, Transmit flow
control (CTSX) and receive flow control (RTSX). Above Figure shows signals input and
output direction .
CTSX input signal is used for UART transmitting. Low input indicates close of the
preparation of the other party to receive data and TC35661 executes UART transmitting
data if there is data for transmission. In case of input high level, TC35661 stops transmitting
by UART frame.
RTSX input signal is used for UART receiving. Low output indicates request data
transmission to UART transmit side device of the other party. TC35661 outputs Low level
from RTSX when being able to receive data and prepares to receive data.
Response time of UART transmitting and receiving for flow control signal depends on baud
rate and internal process status of frame. It is from 1 frame to 4 frames.
6.3.5 UART Baud Rate Setting
TC35661 UART interface has a programmable baud rate setting function. The UART baud
rate can be set according to the following equation. The baud rate generating clock
frequency is set to either 39 MHz or 52 MHz. The over-sampling number is set to an integer
UART Transmit data
UART Transmit
flow control
1
LSB 2 3 4 5 6 MSB
Start bit Stop bit
1 23456789 1
UART Receive flow
control
UART Receive data 1
LSB 2 3 4 5 6 MSB
Start bit Stop bit
OverSampling (*12 to17) /bit
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 11 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
that ranges from 12 to 17. The dividing ratio is set to an integer that ranges from 1 to
65,535.
RatioDividingNumberSamplingOver
FrequencyClockGeneratingRateBaud
BaudRateUART
　
　
Table 6-1 shows examples of UART Baud rate setting. The maximum of the actual baud
rate is 4,333,333 [bps]. If other target baud rates are required, please contact our
engineering department.
Table 6-1 UART Baudrate setting
Target baud rate
[bps]
Actual baud rate
[bps]
Baud rate
generating
clock frequency
[MHz]
Over-sampling
number
Dividing ratio Deviation
[%]
115,200 116,071 39 12 28 +0.7564
115,200 116,071 52 14 32 +0.7564
921,600 928,571 39 14 3 +0.7564
921,600 928,571 52 14 4 +0.7564
1,843,200 1,875,143 52 14 2 +0.7564
2,764,800 2,785,714 39 14 1 +0.7564
4,329,600 4,333,333 52 12 1 +0.0862
6.3.6 Error Detect Function
TC35661 UART interface has 3 kinds of error functions.
Receiver timeout error
Receiver over run error
Receiver frame error
Receiver timeout error reports as an error if the receiver frame intreval counted by TC35661
internal timer is equal to or greater than a predetermined time
Receiver over run error is reported if UART internal receive frame buffer TC35661 is
overflowed.
Receiver frame error is reported if it fails to recognize the unit frame.
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 12 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
7 BLUETOOTH FEATURES
Bluetooth 4.0 with SPP & GATT
GAP support for SPP
GATT Server and Client Mode are supported for LE
Class 2 TX power w/o external PA, improving link robustness.
Excellent link budget (up to 91 dB), enabling long-range applications.
GAP peripheral support for LE
Note:
For GAP Broadcaster and Peripheral role are supported
Observer and Central is not supported on GAP
For GATT Server and Client Mode are supported
8 BLOCK DIAGRAM
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 13 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
9 TEST CONDITIONS
Measurements shall be made under operating free-air temperature range unless otherwise
specified.
Temperature 25 ± 10°C
Humidity 40 to 85%RH
Supply Voltage 3.3V
10 GENERAL DEVICE REQUIREMENTS AND OPERATION
All specifications are over temperature and process, unless indicated otherwise.
10.1 ABSOLUTE MAXIMUM RATINGS
No See 2 Value Unit
Ratings Over Operating Free-Air Temperature Range
1 Voltage on any digital pin –0.3 to
VDD+0.3 V
2 Operating ambient temperature range –40 to 85 °C
3 Storage temperature range –40 to 125 °C
4 Bluetooth RF inputs 10 dBm
5
ESD:
All pads, according to human-body model, JEDEC STD 22, method A114
According to charged-device model, JEDEC STD 22, method C101
1000
500
V
10.2 RECOMMENDED OPERATING CONDITIONS
No Rating Min Typ Max Unit
1 Power supply voltage 1.7 1.8 1.9 V
1 Power supply voltage 2.7 3.3 3.6 V
2 Maximum ambient operating temperature -40 85 C
2 Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the
device. These are stress ratings only and functional operation of the device at these or any other
conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability.
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 14 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
10.3 CURRENT CONSUMPTION
The current consumption is dependent on the user scenario and the setup and timing in the low
power modes.
No Characteristics Condition Min Typ Max Unit
1 Idle Current After reset was pulled down. 7.8 mA
2 During Connection Sending 3-DH5 packets. Max. output
power. 62 mA
3 During Connection Sending DH5 packets. Max. output
power. 62 mA
4 During Connection Sending DH3 packets. Max. output
power. 61 mA
5 During Connection Sending DH1 packets. Max. output
power. 55 mA
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 15 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
11 BLUETOOTH RF PERFORMANCE
11.1 BLUETOOTH CHARACTERISTICS
No Characteristics Condition Min Typ Max BT Spec Unit
1 Operation frequency range 2402 2480 MHz
2 Channel spacing BT-Classic/BLE 1/2 MHz
3 Output Power Maximum setting, measured at dual
ended 50ohm. 4 dBm
4 Sensitivity -88 dBm
No Characteristics Condition Typ Max Unit
1 Spurious emissions
Conducted measurement with a 50-Ω dual-ended load.
Complies with EN 300 328, EN 300 440 class 2, FCC
CFR47, Part 15 and ARIB STD-T-66
<-30 dBm
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 16 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
12 SOLDERING TEMPERATURE-TIME PROFILE (FOR REFLOW SOLDERING)
Reflow permissible cycle: 2
Opposite side reflow is prohibited due to module weight.
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 17 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
13 MODULE DIMENSION
No. Item Dimension Tolerance Remark
1 Width 8.70 0.20
2 Length 15.60 0.20
3 Height 1.80 0.20 With case
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 18 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
14 PAN1026 FOOTPRINT OF THE MODULE
All dimensions are in millimeters.
The outer dimensions have a tolerance of 0.2mm.
Top view, Application PCB
F2 F3 F4 F5
E1 E2 E3 E4 E5 E6 E7 E8 E9
D1 D2 D3 D4 D5 D6 D7 D8
C1 C2 C3 C4 C5 C6 C7 C8
B1 B2 B3 B4 B5 B6 B7 B8 B9
A2 A3 A4 A5 A6 A7 A8A1
1.0 0.6
5.0
0.6
F9
1.2
F7F1 F8
D9
C9
A9
15.6 mm
F6 F11
A11
F12
A12
2.4
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 19 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
15 CASE MARKING
No. Remark
1 Marking for Pin 1 (Circle 0,15 mm)
2 2D-Code, for internal usage only and
can be change without any notice
3 Marking definition see chapter 15.1
2
3
1
15.1 EXAMPLE FOR MARKING
PAN1026 HW/SW
ENW89837A3KF
YYWWD LL
FCCID: T7VPAN10
15.2 MARKING DEFINITION
(1) Pin1 marking
(2) 2D code (Serial number)
(3) Marking:
PAN1026 (Model Name), HW/SW (Hardware/Software version)
ENW89837AxKF (Part Number, refer to chapter 20 Ordering Information)
Lot code (YearYear, WeekWeek, Day, LotLot)
ES (Engineering Sample marking)
16 MECHANICAL REQUIREMENTS
No. Item Limit Condition
1 Solderability More than 75% of the soldering area shall be
coated by solder
Reflow soldering with
recommendable temperature profile
2 Resistance to soldering
heat
It shall be satisfied electrical requirements and not
be mechanical damage
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 20 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
17 RELIABILITY TESTS
The measurement should be done after being exposed to room temperature and humidity for 1
hour.
No. Item Limit Condition
1 Vibration test Electrical parameter should be in
specification
a) Freq.:10~50Hz,Amplitude:1.5mm
a) 20min. / cycle,1hrs. each of XYZ axis
b) Freq.:30~100Hz, 6G
b) 20min. / cycle,1hrs. each of XYZ axis
2 Shock test the same as above Dropped onto hard wood from height of 50cm for 3 times
3 Heat cycle test the same as above -40°C for 30min. and +85°C for 30min.;
each temperature 300 cycles
4 Moisture test the same as above +60°C, 90% RH, 300h
5 Low temp. test the same as above -40°C, 300h
6 High temp. test the same as above +85°C, 300h
18 CAUTIONS
Failure to follow the guidelines set forth in this document may result in degrading of the product’s
functions and damage to the product.
18.1 DESIGN NOTES
(1) Follow the conditions written in this specification, especially the control signals of
this module.
(2) The supply voltage has to be free of AC ripple voltage (for example from a
battery or a low noise regulator output). For noisy supply voltages, provide a
decoupling circuit (for example a ferrite in series connection and a bypass
capacitor to ground of at least 47uF directly at the module).
(3) This product should not be mechanically stressed when installed.
(4) Keep this product away from heat. Heat is the major cause of decreasing the life
of these products.
(5) Avoid assembly and use of the target equipment in conditions where the
products' temperature may exceed the maximum tolerance.
(6) The supply voltage should not be exceedingly high or reversed. It should not
carry noise and/or spikes.
(7) Keep this product away from other high frequency circuits.
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 21 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
18.2 INSTALLATION NOTES
(1) Reflow soldering is possible twice based on the conditions in chapter 15.
Set up the temperature at the soldering portion of this product according to this
reflow profile.
(2) Carefully position the products so that their heat will not burn into printed circuit
boards or affect the other components that are susceptible to heat.
(3) Carefully locate these products so that their temperatures will not increase due to
the effects of heat generated by neighboring components.
(4) If a vinyl-covered wire comes into contact with the products, then the cover will
melt and generate toxic gas, damaging the insulation. Never allow contact
between the cover and these products to occur.
(5) This product should not be mechanically stressed or vibrated when reflowed.
(6) If you want to repair your board by hand soldering, please keep the conditions of
this chapter.
(7) Do not wash this product.
(8) Refer to the recommended pattern when designing a board.
(9) Pressing on parts of the metal cover or fastening objects to the metal will cause
damage to the unit.
(10) For more details on LGA (Land Grid Arrey) soldering processes refer to the
application note.
18.3 USAGE CONDITIONS NOTES
(1) Take measures to protect the unit against static electricity.
If pulses or other transient loads (a large load applied in a short time) are applied
to the products, check and evaluate their operation befor assembly on the final
products.
(2) Do not use dropped products.
(3) Do not touch, damage or soil the pins.
(4) Follow the recommended condition ratings about the power supply applied to this
product.
(5) Electrode peeling strength: Do not add pressure of more than 4.9N when
soldered on PCB.
(6) Pressing on parts of the metal cover or fastening objects to the metal cover will
cause damage.
(7) These products are intended for general purpose and standard use in general
electronic equipment, such as home appliances, office equipment, information
and communication equipment.
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 22 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
18.4 STORAGE NOTES
(1) The module should not be stressed mechanically during storage.
(2) Do not store these products in the following conditions or the performance
characteristics of the product, such as RF performance will be adversely
affected:
Storage in salty air or in an environment with a high concentration of corrosive
gas, such as Cl2, H2S, NH3, SO2, or NOX
Storage in direct sunlight
Storage in an environment where the temperature may be outside the range of
5°C to 35°C range, or where the humidity may be outside the 45 to 85% range.
Storage of the products for more than one year after the date of delivery Storage
period: Please check the adhesive strength of the embossed tape and soldering
after 6 months of storage.
(3) Keep this product away from water, poisonous gas and corrosive gas.
(4) This product should not be stressed or shocked when transported.
(5) Follow the specification when stacking packed crates (max. 10).
18.5 SAFETY CAUTIONS
These specifications are intended to preserve the quality assurance of products and
individual components.
Before use, check and evaluate the operation when mounted on your products. Abide by
these specifications, without deviation when using the products. These products may short-
circuit. If electrical shocks, smoke, fire, and/or accidents involving human life are anticipated
when a short circuit occurs, then provide the following failsafe functions, as a minimum.
(1) Ensure the safety of the whole system by installing a protection circuit and a
protection device.
(2) Ensure the safety of the whole system by installing a redundant circuit or another
system to prevent a dual fault causing an unsafe status.
18.6 OTHER CAUTIONS
(1) This specification sheet is copyrighted. Reproduction of this data sheets is
permissible only if reproduction is without alteration and is accompanied by all
associated warranties, conditions, limitations, and notices.
(2) Do not use the products for other purposes than those listed.
(3) Be sure to provide an appropriate fail-safe function on your product to prevent an
additional damage that may be caused by the abnormal function or the failure of
the product.
(4) This product has been manufactured without any ozone chemical controlled
under the Montreal Protocol.
(5) These products are not intended for other uses, other than under the special
conditions shown below. Before using these products under such special
conditions, check their performance and reliability under the said special
conditions carefully to determine whether or not they can be used in such a
manner.
In liquid, such as water, salt water, oil, alkali, or organic solvent, or in places
where liquid may splash.
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 23 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
In direct sunlight, outdoors, or in a dusty environment
In an environment where condensation occurs.
In an environment with a high concentration of harmful gas (e.g. salty air, HCl,
Cl2, SO2, H2S, NH3, and NOX)
(6) If an abnormal voltage is applied due to a problem occurring in other components
or circuits, replace these products with new products because they may not be
able to provide normal performance even if their electronic characteristics and
appearances appear satisfactory.
(7) When you have any question or uncertainty, contact Panasonic.
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 24 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
19 PACKAGING
If the product has mass production status, indicated in chapter 25, we will deliver the module in
the package which are described below.
19.1 TAPE DIMENSION
19.2 PACKING IN TAPE
Empty spaces in component packed area shall be less than two per reel and those spaces
shall not be consecutive.
Top cover tape shall not be found on reel holes and shall not stick out from reel.
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 25 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
19.3 COMPONENT DIRECTION
19.4 REEL DIMENSION
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 26 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
19.5 LABEL FOR PACKAGE
The picture shows an example from similar product.
PAN1315
Customer Code ENW89818C2JF
105 mm
(1T) Lot code [YYWWDLL] Example from above:
YY year printed 08
WW normal calendar week printed 01
D day printed 5 (Friday)
L line identifier, if more as one printed 1
L lot identifier per day printed 1
(1P) Customer Order Code, if any, otherwise company name will be printed
(2P) Panasonic Order Code: ENW89837AxKF
(9D) Date code as [YYWW]
(Q) Quantity [XXXX], variable max. 1500
(HW/SW) Hardware /Software Release
Hardware 01 Indicates the HW revision.
Software 01 Indicates the SW revision.
19.6 TOTAL PACKAGE
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 27 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
20 ORDERING INFORMATION
Ordering part number Description MOQ (1)
ENW89837A3KF (2)
PAN1026 CLASS 2 Bluetooth dual mode Module according BT-4.0.
115kBaud Standard
Bluetooth® smart ready device
1500
ENW89837A8KF
PAN1026 CLASS 2 Bluetooth dual mode Module according BT-4.0.
9k6Baud
Bluetooth® smart ready device
1500
Notes:
(1) Abbreviation for Minimum Order Quantity (MOQ). The standard MOQ for mass production is
1500 pieces, fewer only on customer demand. Samples for evaluation can be delivered at any
quantity via the distribution channels.
(2) Samples are available on customer demand
21 INFORMATION REGARDING SOFTWARE VERSIONS
The version number of the embedded software can be read out by an extended HCI command.
The extended HCI command class < HCI_M2_Message_Get >" allows the reading of the firmware
version. Pls refer to the extended HCI command list of TC35661 LSI.
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 28 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
22 SOFTWARE
The module software offers both embedded Bluetooth HCI (Host Control Interface), extended HCI
and TCU (Toshiba Control Unit) Command interfaces via the embedded UART interface
a) HCI commands are standard according to Bluetooth standard specifications.
b) Extended HCI commands are available for device control, such as RF control, BD_ADDR
control, firmware version control, embedded IO control, maintenance tasks etc. Please refer
to the “Extension HCI Command Document”.
c) The PAN1026 includes the Bluetooth LSI TC35661 incorporating Bluetooth stack and SPP
profile and BLE GATT profile. The profile application interface is described in the “SPP
Command Interface Document” (about 14 commands) and the “Bluetooth Basic Management
Command Interface Document” (about 46 commands). The related high level commands are
called “TCU” commands.
The “SPP Message Sequence Chart Document” and the “Bluetooth Management Message
Sequence Chart Document” describe the logical and sequential procedure to use those commands.
d) After RESET of the module, the module starts in HCI mode. The “Bluetooth LSI TC35661
Application Note” describes how to start the device and enter into “TCU” mode thereafter.
e) The LSI Supplier (Toshiba) offers SPP drivers, that allows a further abstraction towards the
application software including SPP programming examples. This is documented in the “BT SPP
API Specification”, the ”BT SPP Driver Specification” and the “BT SPP Application Note”. The
“SPP API” offers a few high-level APIs for LSI initialization, connection setup and communication
with a remote SPP device. The user has full control over all LSI features by utilizing the lower-level
“SPP Drivers”. The drivers take care for issuing commands and data to the LSI and they handle
the responses from the TC36661. The “Application Note” includes a SPP programming example
and shows the integration with a RTOS.”
All documents are available on respective Panasonic or Toshiba websites.
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 29 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
23 SOFTWARE BLOCK DIAGRAM
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 30 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
24 ROHS AND REACH DECLARATION
Hereby we declare to our best present knowledge based on declaration of our suppliers that this
product follows the latest official RoHS and REACH Directive.
For the most updated one, please refer to [5].
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 31 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
25 DATA SHEET STATUS
This data sheet contains the preliminary specification.
Panasonic reserves the right to make changes at any time without notice in order to improve
design and supply the best possible product.
Please consult the most recently issued data sheet before initiating or completing a design.
Use this URL to search for the most recent version of this data sheet: PAN1026 Datasheet
26 HISTORY FOR THIS DOCUMENT
Revision Date Modification / Remarks
0.1 November 2012 1st preliminary version.
0.2 January 2013
Update chapter 24 with the latest declaration.
Correct chapter 10.3 with the latest current values measured on the reference design.
Made the description for the USB ports in chapter 6.2 more precised.
0.3 October 2013 Editoral changes.
27 RELATED DOCUMENTS
For an update, please search in the suitable homepage.
[1] PAN1026ETU Design-Guide http://www.pideu.panasonic.de/pdf/185ApplicationNote.pdf
[2] EasySPP Evaluation Software http://pideu.panasonic.de/pdf/185ext.zip
[3] Semiconductor Website: http://www.toshiba-components.com/bluetooth/index.html
[4] Application Note Land Grid Array
http://www.pideu.panasonic.de/pdf/184ext.pdf
[5] REACH and RoHS Certificate
http://www.pideu.panasonic.de/pdf/182ext2.jpg
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 32 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
28 GENERAL INFORMATION
© Panasonic Industrial Devices Europe GmbH 2012.
All rights reserved.
This product description does not lodge the claim to be complete and free of mistakes.
Please contact the related product manager in every case.
If we deliver ES samples to the customer, these samples have the status Engineering
Samples. This means, the design of this product is not yet concluded. Engineering Samples
may be partially or fully functional, and there may be differences to be published Data Sheet.
Engineering Samples are not qualified and are not to be used for reliability testing or series
production.
Disclaimer:
Customer acknowledges that samples may deviate from the Data Sheet and may bear defects
due to their status of development and the lack of qualification mentioned above.
Panasonic rejects any liability or product warranty for Engineering Samples. In particular,
Panasonic disclaims liability for damages caused by
the use of the Engineering Sample other than for Evaluation Purposes, particularly the
installation or integration in an other product to be sold by Customer,
deviation or lapse in function of Engineering Sample,
Improper use of Engineering Samples.
Panasonic disclaimes any liability for consequential and incidental damages.
In case of any questions, please contact your local sales partner or the related product
manager.
29 REGULATORY INFORMATION
29.1 FCC NOTICE
The devices PAN1026, for details refer to Chapter 20, including the antennas, which are
listed in 29.5, complies with Part 15 of the FCC Rules. The device meets the requirements
for modular transmitter approval as detailed in FCC public Notice DA00-1407.transmitter
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received, including
interference that may cause undesired operation.
29.2 CAUTION
The FCC requires the user to be notified that any changes or modifications made to this
device that are not expressly approved by Panasonic Industrial Devices Europe GmbH may
void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 33 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help
29.3 LABELING REQUIREMENTS
The Original Equipment Manufacturer (OEM) must ensure that FCC labelling requirements
are met. This includes a clearly visible label on the outside of the OEM enclosure specifying
the appropriate Panasonic FCC identifier for this product as well as the FCC Notice above.
The FCC identifier is FCC ID: T7VPAN10. This FCC identifier is valid for all PAN1026
modules, for details, see the Chapter 20 - Ordering Information.
In any case the end product must be labelled exterior with
"Contains FCC ID: T7VPAN10"
29.4 ANTENNA WARNING
For the related part number of PAN1026 refer to Chapter 20 - Ordering Information.
This device is tested with a standard SMA connector and with the antennas listed below.
When integrated in the OEMs product, these fixed antennas require installation preventing
end-users from replacing them with non-approved antennas. Any antenna not in the
following table must be tested to comply with FCC Section 15.203 for unique antenna
connectors and Section 15.247 for emissions.
29.5 APPROVED ANTENNA LIST
Note: We are able to qualify your antenna and will add to this list as that process is completed.
Item Part Number Manufacturer Frequency Band Type Gain (dBi)
1 LDA212G3110K Murata 2.4GHz Chip-Antenna +0.9
29.6 RF EXPOSURE PAN1026
To comply with FCC RF Exposure requirements, the Original Equipment Manufacturer
(OEM) must ensure that the approved antenna in the previous table must be installed.
The preceding statement must be included as a CAUTION statement in manuals for
products operating with the approved antennas in the previous table to alert users on FCC
RF Exposure compliance.
Any notification to the end user of installation or removal instructions about the integrated
radio module is not allowed.
The radiated output power of PAN1026 with mounted ceramic antenna
(FCC ID: T7VPAN10) is far below the FCC radio frequency exposure limits. Nevertheless,
the PAN1026 shall be used in such a manner that the potential for human contact during
normal operation is minimized.
End users may not be provided with the module installation instructions. OEM integrators
and end users must be provided with transmitter operating conditions for satisfying RF
exposure compliance.
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 34 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
30 INDUSTRY CANADA CERTIFICATION
PAN1026 is licensed to meet the regulatory requirements of Industry Canada (IC),
license: IC: 216Q-PAN10
Manufacturers of mobile, fixed or portable devices incorporating this module are advised to
clarify any regulatory questions and ensure compliance for SAR and/or RF exposure limits.
Users can obtain Canadian information on RF exposure and compliance from www.ic.gc.ca.
This device has been designed to operate with the antennas listed in Table 20 above,
having a maximum gain of 0.9 dBi. Antennas not included in this list or having a gain
greater than 0.9 dBi are strictly prohibited for use with this device. The required antenna
impedance is 50 ohms. The antenna used for this transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
Due to the model size the IC identifier is displayed in the installation instruction only and
can not be displayed on the modules label due to the limited size (8.7x15.6mm).
30.1 IC NOTICE
The devices PAN1026, for details refer to Chapter 20, including the antennas, which are
listed in 29.5, complies with Canada RSS-GEN Rules. The device meets the requirements
for modular transmitter approval as detailed in RSS-GEN.
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received, including
interference that may cause undesired operation.
30.2 LABELING REQUIREMENTS
The Original Equipment Manufacturer (OEM) must ensure that IC labelling requirements
are met. This includes a clearly visible label on the outside of the OEM enclosure specifying
the appropriate Panasonic IC identifier for this product as well as the IC Notice above. The
IC identifier is 216Q-PAN10. This IC identifier is valid for all PAN1026 modules, for details,
see the Chapter 20 - Ordering Information.
In any case the end product must be labelled exterior with
"Contains IC: 216Q-PAN10"
31 EUROPEAN R&TTE DECLARATION OF CONFORMITY
Hereby, Panasonic Industrial Devices Europe GmbH, declares that the Bluetooth module
PAN1026 and their versions is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC. As a result of the conformity assessment
procedure described in Annex III of the Directive 1999/5/EC, the end-customer equipment
should be labelled as follows:
All versions of the PAN1026 in the specified reference design can be used in the following
countries: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, The Netherlands, the United Kingdom,
Switzerland, and Norway.
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-1026-2400-102
REV.
0.3
SUBJECT CLASS 2 BLUETOOTH LOW ENERGY
SPP MODULE PAGE 35 of 35
CUSTOMER’S CODE
PAN1026
PANASONIC’S CODE
ENW89837AxKF DATE 02.10.2013
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
32 LIFE SUPPORT POLICY
This Panasonic product is not designed for use in life support appliances, devices, or systems
where malfunction can reasonably be expected to result in a significant personal injury to the
user, or as a critical component in any life support device or system whose failure to perform
can be reasonably expected to cause the failure of the life support device or system, or to
affect its safety or effectiveness. Panasonic customers using or selling these products for use
in such applications do so at their own risk and agree to fully indemnify Panasonic for any
damages resulting.

Navigation menu