Panasonic Healthcare 9TB070CRB User Manual 8
Panasonic Healthcare Co., Ltd. 8
8
useschm-o DVD-ROM DRIVE UNIT SR-8583-B l SR-8583-C INSTRUCTION MANUAL Please read through these Instrucfions before operatlng this unit. Inletfacs : ATAPI ' Plan 7 d) sun, unsem mpvume.wm , DVD-ROM DRIVE UNIT . , SR-8583-B/ SR-8583-C INSTRUCTION MANUAL Please rea'd through these instructions before operating this unit. Interface : ATAPI TABLE OF CONTENTS IMPORTANT SAFETY NOTICE 1. PRECAUTIONS WHEN OPERATING ......... 1.1 PRECAUTIONS WHEN TRANSPORTING 1.2 INSTALLATION LOCATION 1.3 PRECAUTIONS FOR USE .. 1.4 PRECAUTIONS FOR OPERATION 1.5 PRECAUTIONS WHEN HANDLING DISC 2. PARTS AND FUNCTIONS . 2.1 FRONT VIEW 2.2 REAR VIEW 3. CONNECTIONS 3.1 CONNECTING VIEW 4. GUIDE TO OPERATION 4.1 INSTALLATIONS 5. GENERAL DESCRIPTION . 5.1 FEATURE SUMMARY 5.2 SYSTEM SET UP .. 5.3 POWER SAVING G. SPECIFICATION SUM A 6.1 PERFORMANCE 6.2 ERROR RATES . 6.3 AUDIO PERFORMANC 6.4 GENERAL PERFORMANCE ...... 6.5 ENVIRONMENTAL CONDITION 6.6 PICK UP LASER .................. 7. BEFORE REQUESTING SERVICE 7.1‘TROUBLESHOOTING .. IMPORTANT SAFETY NOTICE NOTICE (1) You may not reproduce ortranscrihe any pan of thls publication wlthout pen-nissiion. I (2) We reserve the right to revise thls document at any time without notice. (3) If you havevany questions about this document, contact your sales representative. SAFETY NOTICE (1) To prevent fire or electric shock, do not expose this appliance to rain or moisture. (2) To avoid electric shock or damage to the eyes due to laser beam, do not attempt to disassemble the cabinet. For USA (Model SFi—BSBS-B only) FEDERAL COMMUNICATIONS COMMISSION (FCC) RADIO FREQUENCY INTERFERENCE STATEMENT Class B Computing Device NOTE : This equipment has been tested and tound to comply with the limits for a Class B digltal device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interterence in a residential installation. Thls equipment generates. uses and can radiate radio trequency energy and , if not installed and used in accordance with the instructions. may cause harmlul Interterence to radio communications. However, there is no guarantee that interference will not occur In a particular installation. It this equipment does cause harmtul interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the Interterence by one or more of the lollowing measures 2 » ~ Reorient or relocate the receiving antenna. - - Increase the separation between the equipment and receiver. - - Connect the equlpment Into an outlet on a circuit different from that to which the receiver is connected. . - Consult the dealer or an experienced radio/W technician for help. FCC WARNING : Changes or mo 5 not expressly approved by the party responsible for compliance could vcr r's authority to operate the equipment. | i LASER SAFETY'INFORMATION Class 1 LASER Product This equipment is certified to comply with DHHS Rule 21 CFR Chapter 1, SubchapterJ in effect as of date at manufacture. - Elsewhere, the drive is certified to conform to the re uirements of the International Eiegtrotechnical Commission (iEC) 825 and CENEL C EN60825 for Class 1 laser pro ucts. , Class 1 laser products are not considered to be hazardous. To ensure continued product safe , the followin precautions should he heeded. This equipment has the Optical Pickup whic has the Dua Lasers (DVD & CD). Caution : . (1) The use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. (2) The drive is designed to be incorporated into a computer-based system or unitwhich has an enclosing cover. The drive ma not be used as a stand-alone unit. (3) Do not open the drive unit; no user a |ustments or serviceable parts are inside. ForGerman Disses DVD-ROM-Leuiwerk als Elnheit entspricht den Anforderungen von EN60950, EN60825. Wenn das Laufwerk in ein System eingebaut beirieben werden soil, muB das System in seiner Gesamtheit den einschlagigen Vorschritten entsprechen. cuss | LASER Peccuc'r LASER msse 1 LUO‘KAN | usenwre Kuss | LASER APPARAI‘ APPARElL A men oe cusse 1 sum - This label is attached to the upper shield at the top of the drive unit. A ' Obs-as Etikett is! aui der oberen Abschirmu oben aui der Lauiwerkseinheit angebracht. (For German) - Markningen aterfinns pa den oversta pan fiverst pa drivenhetenr For Sweden) - Denne merkelappen er festet til det oversle dekselet a toan av spi Ieren. (For Norway) ' Denne etiket er sat fast pa den nverste skaerm pé rev-arthedens top. (For Denmark) - Tame etiketti on Iiimattu voimayksikan ylaosan suojalevyyn. (For Finland) -This label is attached to the innerside of the rear wall on the Mechanism chassis in the drive um . , CAUTION— usEe RADIATKON WHEN OPEN no Nor sTAAE mm BEAM ADVAHSEL— uszasm‘uucvso AaNlNG sE IKKE IND ; smALEN VARNING— mmm m new ea An 0mm: swim (J m | 511mm CAUTION ANVISIBLE usEn munon WHEN OPEN Do NOT sues wro BEAM OHVIEW ulnzcmrwnm ovum. INSTRUMENTS ADVA SELdem USER NB van m 55 ”(XE IND | smALEN -HELLEH m2 MEDOPHSKE lmmsm ms VwING‘ffi/m m m asmfialmznenmmsmwme VORSICHT— wan New mom m on 5mm sucxeu ADVAHSEL— 155mm Mu 02mm snnn IKKE1NN | STRALEN v VAROI AVATVESSA O‘EfALmWNALASEFSA‘IElLVI-LE unmmsmessm VORSwGHT-wsamns measrmwm wamsosnmue seems! mm m DEN mm mm mm mm! Mums»: wsrmvsmm ADVAHSE 4;st mam-alum; 361 ms snnnwamw | STRRLfiN ELLERSE mam MED omens "5mm VAHOI W100“ VATTAE§A SL‘ 5 AleNA n TEES M my museums“ - This label is attached lathe bottom of the drive unit. - Dlese Aufschrift befinded slch auf der Bodenplat'te des Gsn‘ates. (For German) ° Markningen alertinns pa drivenhetens undarsida. (For Sweden - Denne merkelappen er festet til undersiden av spilleren. (For orway) - Denne etiket er sat last i bunden at drev-enheden. (For Denmark) ‘ Tarpa elikerti on liimattu Iaineen pohjaan. (For Flnland) For Finland VAROITUSI laserseteliylie. For Sweden VARNINGI Laineen kéyttéminen muulia kuin (Essa kiynéohjeessa mainitullatavaiia saanaa altisiaa kéyiifijén turveiiisuusiuoken 1 ylitteveiie nékyméflbrnelie Om apparaten anvinds pa annai sétl an i denna bruksanvisning speciiicerais, kan anvandaren utsétias far osyniig Iasersiréining, som everskrider gransen iér Iaserkiass 1. LQme LASER Specification T pe: Semiconducioriaser GaAs ave Length: 658 t 8 nm - Divergence: 9= 73.7 ° 1 3 " Output Power: 0.8 mW Laser-Dalen: For German) Typ: GaAs-Haibieiter-Lasar Weiienléngez 658 z 8 nm Divergenz: 9 = 73,7 ° 2 3 ° Ausgangsleismng: 0,8 mW Laser— specifikationer: (For Sweden) Twp. Laserhaivedare GaAs Agléngd: 658 t 8 nm Divergens: 8 = 73.7 ° 5 3 ° Uleifeki: 0,8 mW LASER Spesiiikasjon: (For Norway) Type: Haivieder laser GaAs Beigeiengde: 658 1 8 nm Divergens: s = 73,7 ° : 3 ° Utgangsefiekt: 0,8 mW Laser Speciiikaiioner: (For Denmark) Type: Semiconductor GaAs Belge-iaengde: 658 t 8 nm Divergens: 8 = 73.7 ° t 3 ° Udgang-eiiekt: 0,8 mW LASEi-‘iin (eknise! tiedot: For Finland) Tyyppi Laserpuo ijohdin GaAs A Ion piiuus: 658 i 8 nm Haiaamumlnen: 9 = 73.7 ° 1 3 ° Teho: 0,8 mW i_nr CD LASER Specification Tmype: Semiconductor laser GaAIAs ave Length: 775~ 815 nm (T yp 790 nm) Divergence: 9= 53. 4° 1 3 ° Ouipui Power: 0.2 mW Leser-Da’ien: (For German) Wp‘ GaAiAs-Haibieiier-Laser eiienlénge: 775 - 815 nm (Typisch 790nm) Divergenz: 9: 53,4 ° 5: 3 ° Ausgangsleislung: 0.2 mW Laser- specifikationer: (For Sweden Laserhaivedare G iAs vaglangd: 775-- 815 nm (T ypiski 790 nrn) Divergens: 9: 53,4 ° 1 3 ° Utefiekt: 0,2 mW LASER Spesifikasion: (For Norway) Type: Halvieder laser GaAIAs Boigelengde: 775— 815 nm (Typisk 790 nm) Divergens: 0: 53, 4“ t 3 ° Uigangseiiekt: 0,2 mW Laser Specifikalioner: (For Denmark Type: Semiconductor GaAI Baige-iaengde: 775- 815 nm (T yplsk 790 nm) . Divergens: 8: 53,4 ° i 3 ° Udgang-efiekt: 0,2 mW LASERin teicniset tiedot: (For Finland) Tyyppi: Laserpuoliiohdin GaAIAs Aaiion Ituus: 775-- 815 nm (T yypiillnen 790 nm) Hajaan uminen: 8= 53. 4 ° : 3 ° Teho: 0,2 mW A-3 . , INTRODUCTION DVD-ROM Is read—only memory using a Old-ROM disc system and an audio compact dlsc system as a media package which handles digital data. To enjoy audio CD, please insert the Headphone plug lnto the Headphonejaclc(ModeI SR-BSBS-B only) ‘ This drive unit uses DVD-ROM discs which bear the following mark. as. This drive u’nit uses CD-HOM discs which bear the following mark COMPACT whee Thls drive unit uses CD—R discs which bear Ihe iollowing mark (read only). filfi‘g‘fi Recordable This drive unit uses audio compact dlscs which bear the lollowlng mark. COMPACT DIGITAL AUDIO CHAPTER 1 PRECAUTIONS WHEN OPERATING 1.1 PRECAUTIONS WHEN TRANSPORTING To avoid damaFe ‘ Keep the an nai packing materials for the drive unit. - " Before you ransport the drive unit, remove the disc from the drive unit and repack the drive unit in its original packing. 1.2 INSTALLATION LOCATION Do not place unit in the following environments. ‘ Sigh—temperature, high-humidity, extreme temperature changes. ' us ' Excsggswe vibration! sudden shock. ' ' Inclined place. ‘ Direct sunlight. 1.3 PRECAUTIONS FOR USE ‘ Never push obgects of any kind through the Cabinet slots, never spill liquid of any kind on the uni . - ~ ' Do not place objects on the roduct. ' Do not attempt to service th 5 product yourself. ' Do not 0 on or remove covers. ' Do not p ace foreign cb‘scts in the disc insertion slot and attempt to orerate. ' Do not use CD—Ft M d ve when vertically installed. (Horizontal msial ation type only) 1.4 PRECAUTIONS FOR OPERATION To avoid error ' Do not move the drive unit durin operation. ' ' Do not operate the unit directly a er a sudden increase in temperature. NOTE : - A great proportion of problems are usually caused by the following. (D Dust or Finger-prints on the surface of the disc. (2 Random Electrical Noise. ® Scratches and Defects on the surface of the disc. 1.5 PRECAUTIONS WHEN HANDLING DISCS ® Hold the disc by the edges, do not touch the suriace of the disc. @ To remove dust or fingerprint, use a clean, soft, dry cloth. A-5 A-6 ® DQ not write on, or paste paper to the surlace of the disc. Should not paste a large or thick label to the outer back surface (the label slde) of the disc. or it generates drive vibration due to Imbalance of the disc. © Do not store'the disc in a place where the temperature 15 hlgh. 6) Do not use benzine. thlnners and cleaners, etc. 6) Do not make the center hole larger. Q) Do not bend the disc. © Do not drop the disc, or subject it to shock. CHAPTER 2 PARTS AND FUNCTIONS _ 2.1 FRONT VIEW 6) DISC TRAY Accepts a disc. ' (2 HEAD PHONE JACK (Model sn-sses-E only) Headphone can be connected using a 3.5mm stereo mlnl plug‘ ® VOLUME (Model sn-asaa-B only) Adjusts audio output level of Headphone. I @ BUSY INDICATOR . Lights when data Is being accessed from the disc, or the drive-Is playing an audio CD 6) EJECTILOAD BU1TON Ejects and loads the disc tray. © EMERGENCY EJECT HOLE Insert an instrument such as straightened paper clip into this hoie to manually eject the tray. (See 4.1) 7 ' ' 2.2 REAR VIEW ©®®© G) (2 ® INTERFACE CONNECTOR Connects to host computers interface connector. (2) DC (IN) CONNECTOR (3 AUDIO OUT CONNECTOR (Analog) ® JUMPER PIN Insen thejumper according to the Master! Slave I CSEL drive. (See the figure in the next page.) ® DIGITAL AUDIO OUT CONNECTOR NOTE: The serial format 0! digital data (not Audio data) output funclions with some model‘ © FRAME GROUND TAB A-8 CHAPTER 3 CONNECTIONS . 3.1 CONNECTING VlEWk DO (IN) Connector Inlsrhce Connecfnr Audio 00! Connector Dignal Audio om Conneclof Fruru Ground T=rrninal lnlartaca Cable Frame Gmmd'mg Connector Audia Cable Drive-Select (Master! Slave I CSEL) Cable select (an) 3 3 Slave (default) S 2; Mass: CHAPTER 4 GUIDE TO OPERATION 4.1 INSTALLATIONS - Starting the drive: (D Turn on the power supply. (3 Press the eject button. The tray is elected from the drive. © Place the disc in the tray with the disc's label facing up. G) Press the eject button or press the tray lightly as in the following figure The tray is retracted automatically. 6) Loading start. ' This figure shows in case of Horizontal Installation. CAUTION: -Dc not insert any foreign objects into the disc malfunction. - Do not manually Iorce the tray to open. ~When the drive is not in use. keep the tray closed to protect against dust and dirt. tray. This could result in a - Do not press down hard on the tray when loadlng a disc, since thls may result in damage to or malfunction of the tray - In case of emergency. elect the tray manually If for some reason the tray will not eject automatically, press the eject-bar (for example. insert a straightened paper clip minimum straight length = 45mm, Diameter = 1- 1.5mm) into the emergency eject hole to manually eject the tray. (Be- fore proceeding with thls emergency step, make sure that the~power is switched OFF.) m. m fh Min. 45mm Paper clip “331. menu Mas. PmmtmfiPc CHARTER 5 GENERAL DESCRIPTION 5.1 FEATURE SUMMARY (D Embedded ATAPI Interface. ® Automatic Loading with tray. © Horizontal and Vertical Installation. (Vertical : Vertical Installation type only, 12 cm Disc only) G) Audio Playback Capability. © MS-DOS CD-FtOM Extensions Available. (9 5 1/4' Halt Height Design. 5.2 SYSTEM SET UP The ATAPI Devices are selected by the Address field in the Drive Select Register. When a single Device is attached to the interface, it shall be set as Device 0. When the ATAPI Device Is attached along with an ATA Mass Storage Device, the ATAPI Device will be set as Device 1 and respond as a Slave. 5.3 POWER SAVING (D When the drive waits for a command from the Host tor more than two minutes, ‘ then the drive enters“ Power Save Mode. Laser and Spindle motor stop. (2 Re-start‘is automatic when the Host Command ls received or eject button is pushed. NOTE : ' ATAPt : AT Attachment Packet Interface. 0. MS-DOS is a registered trademark oi Microsoft Corporation " ‘ ‘ > _ -A-11 Ax nun nnm Amlm-M-A-tlnwm CHAPTER 6 SPECIFICATION SUMMARY 6.1 PERFORMANCE G) Disc diameter 12m, 80m _‘ (9 Disc speed ' ‘ ’ ' (DVD Single Layer 1x mode) ‘1 _ 570—1480 rlmin (CLV) ‘3 (DVD Dual Layer 1x mode) 630—1630 rlmin (CLV) (nvo Single Layer PCAV mode) ‘2 2250-2960 rlmin (PCAV) (DVD Dual Layer PCAV mode) 25204260 rlmin (PCAV) (co 1x mode) zoo-540 rlmin (CLV) (CD CAV mode) 4740—5540 rlmin (CAV) '4 (3 Data capacity 4.7 GBytes (DVD Single Layer) 5.5 GBytes (DVD Dual Layer) 540 MBytes typical (12 cm CD Disc) - 180 MBytes typic'al (8 cm CD Disc) © Dalairansfer Rate Sequential (DVD 1X mode) 1385 kBytes/s Sequential (DVD PCAV mode) 2770-5540 kBytes/s Sequential (CD 1X mode) 150 kBytes/s (Mode 1) Sequential (CD CAV mode) 1550~3600 kBytes/s (Mode 1) From butter 1657 MBytes/s (PIO Mode 4 without lORDY) 16.67 MBytes/s (Multi-word DMA Mode 2) 33.3 MBytes/s (Ultra DMA Mode 0) . 5) Access time Random access time (DVD PCAV mode) ‘5 _ 140 ms typical Fullstroke access time (DVD PCAV mode) ‘6 340 ms typical Random access time (CD CAV mode) ‘7 90 ms typical Fullstroke access time (CD CAV mode) ‘B 225 ms typical ® Bufler Size 512 kBytes MTBF 125.000 POH (duty 2036) NOTE: ‘1 1X mode: 1X 5 eed mode , ‘2 FCAV mode: PCA speed mode '3 CLV: Constant Linear Velocity '4 CAV: Constant Angular Velocity ' - '5 Random access time (DVD) :Average Data read over the complete area from starting data recorded area LBA:0) to maximam data recorded area(LBA:23197 ), more than 2000 times including Iatenc and layered error correction time. '6 Fullstroke access time (DVD) : From starting eta recorded area (LBAzo) to - maximam data recorded area (LBA:23197F) including latency and layered error conection time. :7 Random access time (CD): Average Data read over the complete area from 00 min. 02 sec. 00 block to 59 min. 58 sec. 74 blocks, more than 2000 times Including latency and layered error correction time. . ‘ ‘8 Fullstroke access time (CD) :From 00 min. 02 sec. 00 block to 59 min. 58 sec. . -74 blocks including latency and layered error correction time. ' ' » ‘ A-12 1 _ _ - ._ l | Ll: 6.2 ennon RATES - Soft read errors Less than 10 " - Hard read errors ‘ ‘ Less than 10 "2 6.3 AUDIO PERFORMANCE ' (1) Analog audio . . (i) Number of channels 2 (2) Frequency response 100 Hz~20 kHz (Headphone) 20 Hz—20 kHz (Line-out) ® SN Ratio More than 80 dB (Headphone! Line—out) © Distortion . ~ - Line—out Less than 0.1 % (1 kHz) - Headphone Less than 0.2 % (1 kHz) (5) Output level - Line-out 0.50 Vn'ns typ. - Headphone 0.60 Vn'ns typ. ' , (2) Digital audio (D Output level CMOS level @ Data formal Base a decision on lEC—QSB 6.4 GENERAL PERFORMANCE (D Power requirement +5V — .0 A +12V 7 .8A (2 Dimensions (W x H x D) 146 x 41.3 x 203 mm(exclude Front Bezel) ' 69 Weight 1000 g typ. 8.5 ENVIRONMENTAL CONDITIONS Operating . - Temperature 5 - 50 °C ' Humidity 5 ~ 90 %Rh » (Max. wet bulb temp. Is 29 °C, Non~condensation) Non-operating . Temperature - 30 - 65 “C - Humidity - 5 - so %Rh (Non-condensation) 6.6 PICK UP LASER (D tor DVD - 0 Type Semiconductor laser GaAs - Wave Length 656 z 8 nm - Divergence B: 73.7 ° 1 3 ° 0 Output power ' . 0.8 mW ' ® for CD . . - Type Semiconductor laser GaAlAs - Wave Length 775 - 815 nm (typ.790 nm) ~ Divergence 9: 58.4 ° 1 3 ° - Output power _ 0.2 mW A-13 ' .._._._ . . L . .. J. an!“ mn... ......= CHAPTER 7 BEFORE REQUESTING SERVICE 7.1 TROUBLESHOOTING (1) There are many kinds of problems caused by misuse. When a problem occurs. check the table below whichdescribes possible problems occurring with your DVD-ROM drive. ' (2) If the DVD-ROM drive Is not operating correctly and you cannot restore operation by lollowing the detailed procedures in the table below. do not remove the cover of the units or adjust further‘ (3) In the case of (2) above, unplug the unit and consult with your dealer or the nearest ’ service station. TROUBLE CORRECTION . ~ DVD-ROM drive does not G) Confirm that the connection between the DVD-ROM operate and Busy Indicator drive and the host computer is correct does not light. (2 Confirm that the program is correct 6) Confirm that the setting drive select switch Is correct. G) Confirm that the disc has been Inserted label side up. (5) Confirm that foreign objects have not been Inserted. Weight and dimensions shown are approximate. Specifications are subject to change without notice. LMQTooazé _ Printed inJapan '
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : Yes Create Date : 2001:05:15 08:13:10 Producer : Acrobat Distiller 4.0 for Windows Modify Date : 2001:05:15 08:13:11-04:00 Page Count : 18EXIF Metadata provided by EXIF.tools