Panasonic Healthcare 9TB078LSS User Manual B33 preface Fnl

Panasonic Healthcare Co., Ltd. B33 preface Fnl

Exhibit E Instruction Manual

SUPERDISK USB DRIVE UNITLKM-RMB33INSTRUCTION MANUALPlease read through these instructions before operating the unit.Interface : USB
iiiTABLE OF CONTENTSIMPORTANT SAFETY NOTICE1. PRECAUTIONS WHEN OPERATING................................................................... A-2 1.1 PRECAUTIONS WHEN TRANSPORTING...................................................... A-2 1.2 INSTALLATION LOCATION ............................................................................ A-2 1.3 PRECAUTIONS FOR USE .............................................................................. A-2 1.4 PRECAUTIONS FOR OPERATION ................................................................ A-2 1.5 PRECAUTIONS WHEN HANDLING DISKS .................................................... A-22. PARTS AND FUNCTIONS .................................................................................... A-3 2.1 FRONT VIEW................................................................................................... A-3 2.2 REAR VIEW ..................................................................................................... A-43. CONNECTIONS..................................................................................................... A-5 3.1 CONNECTING VIEW ....................................................................................... A-54. GUIDE TO OPERATION ....................................................................................... A-6 4.1 INSTALLATIONS ............................................................................................. A-65. GENERAL DESCRIPTION .................................................................................... A-7 5.1 SUMMARY OF FEATURES............................................................................. A-7 5.2 SYSTEM SET UP ............................................................................................ A-7 5.3 POWER SAVING ............................................................................................. A-76. SPECIFICATION SUMMARY ................................................................................ A-8 6.1 PERFORMANCE ............................................................................................. A-8 6.2 ERROR RATES ............................................................................................... A-8 6.3 GENERAL PERFORMANCE ........................................................................... A-8 6.4 ENVIRONMENTAL CONDITIONS ................................................................... A-8 6.5 PICK UP LASER .............................................................................................. A-87. BEFORE REQUESTING SERVICE....................................................................... A-9 7.1 TROUBLESHOOTING ..................................................................................... A-9APPENDIX ...............................................................................................................A-10SUPERDISK USB DRIVE UNITLKM-RMB33INSTRUCTION MANUALPlease read through these instructions before operating the unit.Interface : USBBUSY
ivIMPORTANT SAFETY NOTICENOTICE(1) You may not reproduce or transcribe any part of this publication without permission.(2) We reserve the right to revise this document at any time without notice.(3) If you have any questions about contents of this document, contact your salesrepresentative.SAFETY NOTICE(1) To prevent fire or electric shock, do not expose this drive unit to rain or moisture.(2) To avoid electric shock or damage to the eyes due to laser beam, do not attempt todisassemble the cabinet.FEDERAL COMMUNICATIONS COMMISSION (FCC) RADIOFREQUENCY INTERFERENCE STATEMENTClass B Computing DeviceNOTE : This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and , if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the followingmeasures :- - Reorient or relocate the receiving antenna.- - Increase the separation between the equipment and receiver.- - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- - Consult the dealer or an experienced radio/TV technician for help.FCC WARNING : Changes or modifications not expressly approved by the partyresponsible for compliance could void the user’s authority to operate the equipment.CAUTION : Use shielded connecting cables in order to meet FCC emission limits andalso to prevent interference to nearby radio and television reception.For USAThis equipment is certified to conform to EN60950, EN60825.The drive system with AC Adapter and Interface cable must be certified to conform to therelevant regulations.
vLASER SAFETY INFORMATIONClass 1 LASER ProductThis equipment is certified to comply with DHHS Rule 21 CFR Chapter 1, Subchapter J ineffect as of date of manufacture.Elsewhere, the drive is certified to conform to the requirements of the InternationalElectrotechnical Commission (IEC) 825 and CENELEC EN60825 for Class 1 laserproducts.Class 1 laser products are not considered to be hazardous. To ensure continued productsafety, the following precautions should be heeded.Caution :(1) The use of controls or adjustments or procedures other than those specified hereinmay result in hazardous radiation exposure.(2) Do not open the drive unit; no user adjustable or serviceable parts are inside.LASER Spesifikasjon: (For Norway)Type: Halvleder laser GaAlAsBølgelengde: 795 ± 20 nmDivergens:θv = 30° ~ 36°Utgangseffekt: 3,6 mWLaser Specifikationer: (For Denmark)Type: Semiconductor GaAlAsBølge-længde: 795 ± 20 nmDivergens:θv = 30° ~ 36°Udgang-effekt: 3,6 mWLASERin tekniset tiedot: (For Finland)Tyyppi: Laserpuolijohdin GaAlAsAallon pituus: 795 ± 20 nmHajaantuminen:θv = 30° ~ 36°Teho: 3,6 mWLASER SpecificationType: Semiconductor laser GaAlAsWave Length: 795 ± 20 nmDivergence:θv = 30° ~ 36°Output Power: 3.6 mWLaser-Daten: (For German)Typ: GaAlAs-Halbleiter-LaserWellenlänge: 795 ± 20 nmDivergenz:θv = 30 ° ~ 36 °Ausgangsleistung: 3,6 mWLaser- specifikationer: (For Sweden)Typ: Laserhalvedare GaAlAsVåglängd: 795 ± 20 nmDivergens:θv = 30° ~ 36°Uteffekt: 3,6 mWVAROITUS! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavallasaattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömällelasersäteilylle.VARNING! Om apparaten används på annat sätt än i denna bruksanvisningspecificerats, kan användaren utsättas för osynlig laserstrålning, somöverskrider gränsen för laserklass 1.For FinlandFor Sweden
viCLASS 1 LASER PRODUCTLASER KLASSE 1LUOKAN 1 LASERLAITEKLASS 1 LASER APPARATAPPAREIL A LASER DE CLASSE 1EN60825CAUTION–VORSICHT–ADVARSEL–ADVARSEL–VARNING–VARO!INVISIBLE LASER RADIATION WHEN OPENDO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS.UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET, NICHT IN DENSTRAHL BLICKEN AUCH NICHT MIT OPTISCHEN INSTRUMENTEN.USYNLIG LASERSTRÅLING VED ÅBNING.SE IKKE IND I STRÅLEN–HELLER IKKE MED OPTISKE INSTRUMENTER.USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPNES.STIRR IKKE INN I STRÅLEN ELLER SE DIREKTE MED OPTISKE INSTRUMENTER.OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD.STIRRA EJ IN I STRÅLEN OCH BETRAKTA EJ STRÅLEN MED OPTISKA INSTRUMENT.NÄKYMÄTÖNTÄ AVATTAESSA OLET ALTTIINA LASERSÄTEILYLLE.ÄLÄ TUIJOTA SÄTEESEEN ÄLÄKÄ KATSO SITÄ OPTISEN LAITTEEN LÄPI.CAUTION–VORSICHT–ADVARSEL–ADVARSEL–VARNING–VARO!INVISIBLE LASER RADIATION WHEN OPENDO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS.UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET, NICHT IN DENSTRAHL BLICKEN AUCH NICHT MIT OPTISCHEN INSTRUMENTEN.USYNLIG LASERSTRÅLING VED ÅBNING.SE IKKE IND I STRÅLEN–HELLER IKKE MED OPTISKE INSTRUMENTER.USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPNES.STIRR IKKE INN I STRÅLEN ELLER SE DIREKTE MED OPTISKE INSTRUMENTER.OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD.STIRRA EJ IN I STRÅLEN OCH BETRAKTA EJ STRÅLEN MED OPTISKA INSTRUMENT.NÄKYMÄTÖNTÄ AVATTAESSA OLET ALTTIINA LASERSÄTEILYLLE.ÄLÄ TUIJOTA SÄTEESEEN ÄLÄKÄ KATSO SITÄ OPTISEN LAITTEEN LÄPI.CLASS 1 LASER PRODUCTLASER KLASSE 1LUOKAN 1 LASERLAITEKLASS 1 LASER APPARATAPPAREIL A LASER DE CLASSE 1EN60825• This label is attached to the bottom of the drive unit.• Diese Aufschrift befinded sich auf der Bodenplatte des Gerätes. (For German)• Märkningen återfinns på drivenhetens undersida. (For Sweden)• Denne merkelappen er festet til undersiden av spilleren. (For Norway)• Denne etiket er sat fast i bunden af drev-enheden. (For Denmark)• Tämä etiketti on liimattu laitteen pohjaan. (For Finland)• You can see this label on the bottom shield when removing the bottom cover.• Dieser Aufkleber findet sich an der Bodenplatte nach Entfernen der Bodenabdeckung.(For German)• Ni kan finna denna etiketten på den undre delen när det nedersta locket tas bort.(For Sweden)• De kan finne denne etiketten på undersiden når det nederste lokket fjernes. (For Norway)• De kan finde denne etiket på undersiden når den nederste låg tages vak. (For Denmark)• Tämä merkki näkyy pohjalevyssä kun poistat pohjansuojan. (For Finland)• You can see this label on the upper shield when opening the top cover.• Dieser Aufkleber ist auf der oberen Abschirmung sichtbar, wenn die obere Abdeckung geöffnet wird.(For German)• Ni kan finna dette märket på den övre skärmen när Ni öppnar den översta locken. (For Sweden)• De kan finne dette merket på den øvre skjermen når De åper den øverste lokken. (For Norway)• Denne mærkat kan ses på den øverste afskærmning, når topdækslet åbnes. (For Denmark)• Tämä nimilappu näkyy yläsuojuksella, kun avaat kannen. (For Finland)
A-1INTRODUCTIONSuperDisk diskette can store high capacity data (up to 83 disks of the standard FD).This SuperDisk drive can read/ write the SuperDisk diskette and provides a full read/ writecompatibility with the standard 3.5 " 2DD/ 2HD (720 KB/ 1.44 MB).System Requirements• ComputerIBM PC-AT or Compatible• Operating SystemMS Windows 98 (Pre-installed)TM This drive unit uses SuperDisk diskettes which bear the following mark. This mark is a trademark of Imation Corporation.
A-2CHAPTER 1 PRECAUTIONS WHEN OPERATING1.1 PRECAUTIONS WHEN TRANSPORTINGTo avoid damages* Keep the original packing materials for the drive unit.* Prior to sending the drive unit, remove the disk from drive unit and repackdrive unit as it was originally packed.1.2 INSTALLATION LOCATIONDo not expose unit to the following environments.* High-temperature, high-humidity, extreme temperature changes.* Dusty* Excessive vibration/ sudden shock.* Inclined place.* Direct sunlight.1.3 PRECAUTIONS FOR USE* Never push or insert objects of any kind through the disk slot, never spill liquidof any kind on the unit.* Never use the Magnetic head cleaning kit. If you use it, it may shave the head. TheSuperDisk drive’s head is cleaned by itself.* Do not place objects on the product.* Do not attempt to repair this product yourself.* Do not open or remove covers.1.4 PRECAUTIONS FOR OPERATIONTo avoid data read/ write error* Do not move the drive unit during operation.* Do not operate the unit immediately after a sudden increase in temperature.* Do not use the SuperDisk drive with vertical installation.1.5 PRECAUTIONS WHEN HANDLING DISKS➀Do not finger the magnetic disk throughthe shutter.➁While not using, ensure the disk shutter istightly closed to protect the magneticsurface.➂Keep away any magnetic instrument froma disk.➃Store a disk in the specified environment:Temperature: 4 to 60 °CRelative humidity: 8 to 90 %Max. wet bulb temp. is 29 °CNo moisture condensationNever!ProtectNever!4-60°C ( 39-140°F)
A-3BUSYCHAPTER 2 PARTS AND FUNCTIONS2.1 FRONT VIEW➀ DISK SLOT Insert a disk.➁ BUSY INDICATOR Lights while a command from host is executed. (including read/ write operations)➂ EJECT BUTTON Ejects a disk.➃ EMERGENCY EJECT HOLE Insert an instrument such as straightened paper clip pin into this hole to manually eject a disk. (See 4.1)➀➁➂➃
A-42.2 REAR VIEW➀ POWER INDICATOR Lights up while the drive power is on.➁ DC (IN) CONNECTOR Connects to 5V DC power source.➂ USB CONNECTOR Connects to host computer’s USB interface port.DC IN 5V+–INTERFACE➀➁ ➂
A-5CHAPTER 3 CONNECTIONS3.1 CONNECTING VIEWINTERFACEFrom 5V DC Power Source To USB Port on Host PC5V DC Power Cable USB Interface CableNote :When you connect the SuperDisk drive while the host computer power is on (hot-plug),first, the SuperDisk drive must be plugged to 5 V DC power source, and next, plugged to USBport on the host computer in the order.When you disconnect, unplug in the reverse order. If not, the host computer may hang-up.Rear Sideof the drive unitThe AC Adapter for this SuperDisk(LKM-RMB33) must be satisfied the belowrequirements.1. The AC Adapter has been certified to conform to the requirements of the relevantregulations.2. The AC Adapter output is supplied through SELV (Safety Extra Low Voltage) circuit andLimited Current circuit.3. The AC Adapter output voltage and current value are the prescribed one.
A-6Paper clip pinMin. 45 mmBUSYCHAPTER 4 GUIDE TO OPERATION4.1 INSTALLATIONS • To start operation on drive.➀Turn on the power supply of Host PC.➁ Plug the 5V DC cable and USB interface cable from Host PC to the SuperDiscdrive. (Refer the previous page)➂Insert a disk into the disk slot with the disk’s label facing up and the shutter sideheading as shown in the figure below.CAUTION:• Do not insert any foreign objects into the disk slot. This could result in amalfunction.• Do not press down hard on a disk when inserting the disk, because this may causedamages or malfunction to the disk and/or the drive unit.• In case of emergency, eject the disk manuallyIf for some reason the disk does not eject automatically,press the eject-bar (for example, insert a straightened paperclip pin with minimum straight length = 45 mm, Diameter =1 ~ 1.3 mm) into the emergency eject hole to eject the disk.(Before proceeding with this emergency step, make surethat the power is switched OFF.)
A-7CHAPTER 5 GENERAL DESCRIPTION5.1 SUMMARY OF FEATURES➀High Data Storage Capacity (with SuperDisk diskette)➁Full read/ write compatibility with the standard 2DD/ 2HD (720 KB/ 1.44 MB)➂Embedded USB Interface➃Slim Stand Alone Design➄Horizontal Installation Type5.2 SYSTEM SET UPThe USB technology Devices are fully hot-pluggable to the USB-enabled computer.The SuperDisk drive with USB interface is able to be attached to host computer andused without turning off or rebooting the computer.5.3 POWER SAVING (Standby Mode)➀When the drive waits for a command from the Host for more than four seconds,then the drive enters Power Save Mode. Laser and Spindle motor stop.➁Restart is automatic when the Host Command is acknowledged.NOTE :• USB : Universal Serial Bus.• MS Windows is a registered trademark of Microsoft Corporation.• IBM PC-AT is a registered trademark of International Business MachinesCorporation.•SuperDisk and the SuperDisk logo are trademarks of Imation Corporation.
A-8CHAPTER 6 SPECIFICATION SUMMARY6.1 PERFORMANCE➀Disk Diameter 3.5 inches➁Disk speed720 r/min➂Storage Capacity (Formatted)120 MBytes (SuperDisk)720 KB/1.44 MBytes (2DD/ 2HD)➃Recording Density 33.8 k FCI (SuperDisk)➄Track Density 2490 TPI (SuperDisk)➅Typical Sustained Transfer Rate from Disk266 ~ 479 KBytes/ s (SuperDisk)➆Seek Time (average) 70 ms typicalMTBF 15,000 POH (@duty 25 %)6.2 ERROR RATES• Hard read errors Less than 10 -126.3 GENERAL PERFORMANCE➀Power requirement +5 V 1.2 A➁Dimensions (W x H x D) 111 x 21.5 x 167 mm➂Weight 370 g typ.6.4 ENVIRONMENTAL CONDITIONSOperating Non-operating• Temperature 5 ~ 35 °C –10 ~ 60 °C• Humidity 20 ~ 80 %Rh 20 ~ 80 %Rh(Non-condensation) (Non-condensation)Note: The Media specification limits the environment to a wet bulb temperatureof 29.4 deg.C (85 deg.F)6.5 PICK UP LASER• Type Semiconductor laser GaAlAs• Wave Length 795 ± 20 nm• Divergenceθv = 30° ~ 36°• Output power 3.6 mW
A-9CHAPTER 7 BEFORE REQUESTING SERVICE7.1 TROUBLESHOOTING(1) There are many kinds of problems caused by misuses. When a problem occurs,check the table below which describes possible problems occurring with yourSuperDisk drive.(2) If the SuperDisk drive does not operate correctly and you cannot restore operationby the following detailed procedures in the table, do not remove the cover of theunits or adjust further.(3) In the case of (2) above, unplug the unit and consult with your dealer or the nearestservice station. TROUBLE• SuperDisk drive does notoperate and Busy Indicatordoes not light.CORRECTION➀Ensure that the DC power cable has been pluggedsurely.➁Ensure that the USB connection between the SuperDiskdrive and the host computer is correct.➂Ensure that the Device Driver installation has beencompleted.➃Ensure that the disk has been inserted label side up andshutter side head.➄Ensure that foreign objects are not inserted.
A-10APPENDIXInstallation of the SuperDisk Device Driver for Windows 981. Turn on the personal computer and start Windows 98.2. Set the SuperDisk driver disc in your CD-ROM drive.3. Open the Run… window from the Start menu.4. Type "A:\SETUP.EXE" and press OK. (assumes that your drive is designed "A")5. Follow the procedures displayed on the screen to install SuperDisk Device Driver.This Device Driver software must be installed into your host computer before operating theSuperDisk drive.Formatting of SuperDisk / 2DD or 2HD disk for Windows 981. Insert a disk that you wish to format into the SuperDisk drive.2. Right-click on the " 3 1/2 Floppy " icon.3. Left-click on the " Format utility For SuperDisk ".4. " Format Utility for SuperDisk " window appears.Follow the procedures displayed on the screen to perform formatting of disk.Note : Low-level formatting for SuperDisk disk is not supported.(You can also use the Formater attached with Windows 98)
Weight and dimensions shown are approximate.Specifications are subject to change without notice.Created by MKE in Japan

Navigation menu