Panasonic Mobile Communications Development of USA 21C001A GSM Cellular Mobile Radio User Manual X800 China OI

Panasonic Mobile Communications Development Corpor GSM Cellular Mobile Radio X800 China OI

Contents

User Manual 2

49
Select Mailbox Name to Use to Send E-mail
To select which mailbox to use to send e-mail messages, see page 55.
If you have more than one mailbox and you start to write a new message, the phone
notifies you of the mailbox name that is currently in use. To change the mailbox, see
page 55 to change Mailbox in use setting.
Create a New E-mail Message
To create a new e-mail message, see page 44.
Retrieve E-mail
You can view your mailbox either online or offline. When you are online, you see your
messages stored on the remote server. When you are offline, you see messages
retrieved from the remote server to your phone, or message headers if not yet retrieved.
IMAP4 protocol allows you to retrieve messages without attachments, so large memory
files can remain in your online mailbox and not be stored in the phone.
You can mark as read or delete messages, or copy them to another folder and view
message details when offline. Your mailbox is synchronised to the server when you go
online.
When you receive a new e-mail message, a new message notice appears on the
standby screen.
To connect to your mailbox, from Messages application:
1. Open Messages.
2. Select Mailbox (or renamed mailbox).
3. Press Options and select Connect.
4. Once you are connected, press Options and select Retrieve e-mail > New,
Selected, or All.
• To select certain messages, use Mark/Unmark action.
5. Once messages are retrieved, you can read them offline. Press Options and select
Disconnect.
APOP secure login
(POP3 only)
Select On to use authenticated POP log in, encrypts password.
Retrieve attachment
(IMAP4 only)
Select Yes or No to automatically retrieve attachment when
message is fetched.
Retrieve headers
(IMAP4 only)
Select All to retrieve all message headers, or select User
defined and type in a number to retrieve only the latest headers.
X800_China_OI.book Page 49 Tuesday, November 16, 2004 11:25 AM
50
Read Messages Offline
From Messages application:
1. Open Messages.
2. Select Mailbox (or renamed mailbox).
3. Press No when phone asks to connect to mailbox.
4. Scroll to desired message and open.
Reply to E-mail Messages
From Messages application:
1. Open Messages.
2. Select Mailbox (or renamed mailbox).
3. Highlight desired message.
4. Press Options and select Reply > To sender or To all.
Copy E-mail Messages
From Messages application:
1. Open Messages.
2. Select Mailbox (or renamed mailbox).
3. Highlight desired message.
4. Press Options and select Copy to folder.
5. Choose from the appropriate folders and press OK.
Sort Message List
From Messages application:
1. Open Messages.
2. Select Mailbox (or renamed mailbox).
3. Press Options and select Sort by > Date, Sender, or Subject.
Save Attachment or Data
You can save attachments, such as Contacts cards, Calendar items, links to streaming
media, and configuration data.
1. Open desired message.
2. Press Options and select Attachments >
Open Open attachment in read-only mode.
Save Save attachment.
Send Send attachment via Bluetooth or via infrared.
Note: Attachment cannot be opened, saved, or sent if it has not been retrieved.
X800_China_OI.book Page 50 Tuesday, November 16, 2004 11:25 AM
51
Add E-mail Address to Contacts Card
From Messages application:
1. Open Messages.
2. Select Mailbox (or renamed mailbox).
3. Open desired message.
4. Press Options and select Add to Contacts > Create new to create a new Contacts
card using the sender’s e-mail address, or Update existing to place the sender’s
e-mail address in an existing Contacts card.
5. Continue with Create New Contact Cards on page 30 or Edit Contact Cards on
page 32.
Manage Mailboxes
From Messages application:
1. Open Messages.
2. Press Options and select Settings.
3. Scroll to E-mail and open.
4. Highlight Mailboxes and open.
5. Scroll to desired mailbox name and press Options and select Edit or Delete.
DRAFTS
Your unfinished text (SMS), multimedia (MMS), and e-mail messages that have not
been sent are stored in the Drafts folder.
From Messages application:
1. Open Messages.
2. Scroll to Drafts and open.
3. Scroll to desired message and open.
4. Enter the rest of the information.
5. Press , or if desired press Options and select:
Send Send message
Add recipient Send to more than one address
Insert > Insert items such as Picture, Image, Sound clip, Video clip, or
Template, depending on what type of file the message type sup-
ports
Attachments (E-mail)
Objects (Multimedia)
Open, insert, or remove attachments or objects
Edit presentation
(Multimedia)
Edit the presentation
Preview message
(Multimedia)
Preview message before sending
X800_China_OI.book Page 51 Tuesday, November 16, 2004 11:25 AM
52
SENT
Text, multimedia, smart, and e-mail messages that have been successfully sent are
stored in the Sent folder, which stores the last 15 sent messages.
Move Sent Messages to My Folders
From Messages application:
1. Open Messages.
2. Scroll to Sent and open.
3. Scroll to desired message, then press Options and select Move to folder.
4. Select desired folder and press OK.
View or Delete Sent Messages
To view or delete sent messages and objects or attachments, from Messages
application:
1. Open Messages.
2. Scroll to Sent and open.
3. Scroll to desired message and open.
4. Press Options and select:
Check contacts Match names in To and Cc fields to names in Contacts
Message details View details such as message size
Sending options View or change sending options depending on type of message
Attachments (E-mail)
Objects (Multimedia)
Open, save, or send attachments or objects
Delete Delete message, object or attachment
Message details View details such as message size
X800_China_OI.book Page 52 Tuesday, November 16, 2004 11:25 AM
53
OUTBOX
Outbox stores messages waiting to be sent, and messages that could not be sent; for
example, connection to the network failed.
It also temporarily stores Bluetooth and Infrared messages that are waiting for
connection to the receiving device. If the connection fails, Outbox does not keep the
message.
The Outbox icon appears on the standby screen when there are messages in the
Outbox.
Status of Outbox messages:
Send, View, and Manage Outbox Messages
From Messages application:
1. Open Messages.
2. Scroll to Outbox and open.
3. Scroll to desired message. Press Options and select:
Messages waiting in the Outbox are automatically resent (except e-mail set to send
during next connection), depending on network availability.
To cancel resending, from Messages application:
1. Open Messages.
2. Scroll to Outbox and open.
3. Scroll to desired message. Press Options and select Delete.
Sending Connecting to network Waiting Waiting to connect
Queued E-mail waiting for connection Resend at If sending failed, resend attempt
Deferred Suspend sending to another time Failed Sending has not been successful
Defer sending Defer sending until you manually send
Message details View details such as message size
Send Send message now
Move to Drafts Move message to Drafts folder, where it can be edited and
resent
X800_China_OI.book Page 53 Tuesday, November 16, 2004 11:25 AM
54
REPORTS
Delivery reports for text, multimedia, and smart messages can be sent by your wireless
service provider, and stored in the Reports folder. Delivery reports are not available for
e-mail messages.
From Messages application:
1. Open Messages.
2. Press Options and select Settings.
3. For text messages, open Text message, scroll to Receive report and select Yes.
For multimedia messages, open Multimedia message, scroll to Receive report
and select Yes.
MESSAGE SETTINGS
Text Message Settings
From Messages application:
1. Open Messages.
2. Press Options and select Settings.
3. Open Text message. Open fields as needed:
Multimedia Message Settings
From Messages application:
1. Open Messages.
2. Press Options and select Settings.
3. Open Multimedia message. Open fields as needed:
Message centres Choose from provided list of network and SIM message centres
Msg. centre in use Choose which message centre is used to deliver text messages
Receive report Choose Yes or No. If Yes, delivery reports showing status of
sent text messages are stored in Reports folder.
Message validity Choose a time period from 1 hour to maximum in which text
message delivery is attempted from the message centre.
Message sent as Choose Paging or E-mail if you wish to convert your text mes-
sage to one of those forms for sending. Available only if network
can perform the conversion.
Preferred connection Choose GSM or GPRS connection.
Reply via same ctr. Select Yes to allow your text message recipients to use your text
message centre to reply to you without having to subscribe to a
text messaging service.
* Access point in use Choose from list of access points. See page 96 to create and
edit access points.
X800_China_OI.book Page 54 Tuesday, November 16, 2004 11:25 AM
55
E-mail Message Settings
From Messages application:
1. Open Messages.
2. Press Options and select Settings.
3. Open E-mail. Open fields as needed:
Service Message Settings
From Messages application:
1. Open Messages.
2. Press Options and select Settings.
3. Open Service message. Open fields as needed:
Cell Broadcast Message Settings
From Messages application:
1. Open Messages.
2. Press Options and select Settings.
Multimedia reception Choose Only in home net., Always on or Off for incoming
messages.
On receiving msg. Choose Retr. immediately, Defer retrieval or Reject message
for incoming messages.
Allow anon.
messages
Select Yes to receive messages from anonymous (unknown)
senders.
Receive adverts Select Yes to receive advertisements.
Receive report Select Yes to receive delivery reports.
Deny report sending Select Yes so that your phone will not send a delivery report to
confirm receipt of a new message.
Message validity Choose a time period for the message centre to attempt mes-
sage delivery.
Image size Select Small (default) for 160x120 (max) image size, or Large
for 640x480 (max).
Default speaker Choose to play sound clips from Loudspeaker or Handset
speaker.
Mailboxes View list of mailboxes you have set up.
Mailbox in use Select mailbox to use to send e-mail.
Service messages Select On to receive service messages.
Download messages Select Manually to allow only authorised senders to send ser-
vice messages.
X800_China_OI.book Page 55 Tuesday, November 16, 2004 11:25 AM
56
3. Open Cell broadcast. Open fields as needed:
Other Message Settings
From Messages application:
1. Open Messages.
2. Press Options and select Settings.
3. Open Other. Open fields as needed:
SIM MESSAGES
To view, copy, or delete text messages stored on the SIM card, from Messages
application:
1. Open Messages.
2. Press Options and select SIM messages.
3. A list of messages stored on the SIM card appears.
4. To view the messages, first copy them to the phone memory. Before copying
multiple messages, use Mark/Unmark > Mark or Mark all to mark any or all desired
messages to perform copying at one time. Press Options and select Copy.
5. Choose the desired folder to place the copy and press OK.
6. If desired, press Options and select Delete to delete messages from the SIM card.
CELL BROADCAST MESSAGES
Cell broadcast messages are sent by your wireless service provider to GSM customers
in a certain area. They provide general information about topics such as weather
reports, traffic news, and customer services. Available topic names and numbers are
supplied by your wireless service provider.
From Messages application:
1. Open Messages.
2. Press Options and select Cell broadcast.
Reception Select On to receive cell broadcast messages.
Language Select All to receive cell broadcasts in all possible languages, or
Selected to choose from a list, or Other if your preferred lan-
guage is not listed.
Topic detection Select On to view a list of topic indexes provided by the network.
Save sent messages Select Yes to save sent messages to the Sent folder.
No. of saved msgs. Type in a number to set maximum amount of messages saved to
Sent folder.
Note: Leaving Cell broadcast set to On reduces battery life.
X800_China_OI.book Page 56 Tuesday, November 16, 2004 11:25 AM
57
3. Press Options and select:
SERVICE COMMAND
Ask your wireless service provider to activate a particular service by sending a service
command. These commands, which may be called USSD commands, can activate
services such as mobile prepay and chat.
1. Contact your wireless service provider for the proper service command statement.
From Messages application:
2. Open Messages.
3. Press Options and select Service command.
4. Enter the service command, then press .
Open Open topic
Subscribe or
Unsubscribe
Subscribe to selected topic to receive related messages. Select
Unsubscribe to stop receiving related messages.
Hotmark or
Remove hotmark
When topic is hotmarked, you will receive a notice when related
messages arrive.
Topic > Choose Add manually to type in a topic name or topic number
or Delete all.
Settings See Cell Broadcast Message Settings on page 55 to turn on or
off Cell broadcast reception, choose Cell broadcast language,
and turn on or off topic detection.
X800_China_OI.book Page 57 Tuesday, November 16, 2004 11:25 AM
58
CAMERA
Take pictures to send in a multimedia or e-mail message, or for your Contacts cards.
Pictures can also be sent via infrared or Bluetooth.
TAKE A PICTURE
From Camera application:
1. With the flip open, the main display acts as a viewfinder. Move
the phone around to frame your subject.
2. To snap the picture, press .
• The image is automatically saved to Images folder. See
Gallery on page 62.
To send the picture immediately, press . Scroll to Via
multimedia, Via e-mail, Via Bluetooth, or Via infrared. To
complete multimedia messages, see page 42; or E-mail messages
on page 44; or Bluetooth on page 83; or Infrared on page 85.
If you do not want to save it, either:
• Press and select Yes.
• Press Options and select Delete.
Change Capture Modes
To choose different picture capture modes, scroll to select:
Standard regular size landscape pictures (640x480 pixels [VGA])
Portrait smaller pictures that use much less memory and can be placed in
Contacts cards (80X96 pixels)
• Red number in upper right corner indicates the amount of pictures that can fit in
phone memory, depending on selected image size.
Zoom
You can zoom in on your subject before taking a picture.
1. When viewing your subject in the viewfinder, press once for 2x zoom, press
again for 4x zoom. Press to step back one zoom level.
2. Press to snap the picture.
Note: Camera mode depletes battery power more rapidly. To conserve your battery,
the phone shifts to camera standby mode after 1 minute if no keys are pressed.
X800_China_OI.book Page 58 Tuesday, November 16, 2004 11:25 AM
59
Self-timer
Set the camera to take a picture after setting the timer to delay the shutter.
1. From the viewfinder, press Options and select Self-timer > 10 seconds, 20
seconds, or 30 seconds.
2. Move the phone around to frame your subject.
3. Press Activate to start the timer.
• The shutter sounds when the picture is taken.
• The image is stored in the Media Gallery Images folder.
PhotoLight
Light up your subject before snapping a picture. See PhotoLight on page 121.
TAKE A SELF-PORTRAIT
From Camera application:
1. Close the phone flip. The external display acts as a viewfinder. Move the phone
around to frame your subject.
2. Press Multibutton on side of phone to snap the picture.
3. Open the flip. The image appears on the main display.
• The image is automatically saved to Media Gallery Images folder. To make
changes to the image, press Options and select Go to Gallery. See Gallery on
page 62.
To send the picture immediately, see Send Pictures on page 60.
If you do not want to save it, press Options and select Delete.
SAVE PICTURES
Pictures are automatically saved in the Images folder in Media Gallery in phone
memory. You can also save pictures to a folder in DCIM folder in miniSD Card as DCF-
Exif format (JPEG).
To save pictures to the miniSD Card, from Camera application:
1. Press Options and select Settings.
2. Scroll to Memory in use and open.
3. Select NO NAME or the name assigned to your miniSD Card.
• All pictures are saved to the miniSD Card until this setting is changed to Phone
memory, or miniSD Card is removed.
Note: To rename your miniSD Card, see miniSD Card (Memory Card)
on page 115.
X800_China_OI.book Page 59 Tuesday, November 16, 2004 11:25 AM
60
VIEW PICTURES
From Camera application:
1. Press Options and select Go to Gallery. A list of images stored in phone memory
displays. Scroll to desired image and open.
• Or to view images in miniSD Card, press Back, scroll to miniSD Card tab.
Scroll to desired image or folder and open.
NAME PICTURES
To change the name that is used as the default file name for new images, from Camera
application:
1. Press Options and select Settings.
2. Open Default image name and enter desired text.
• For example, if you change the Image Name to SkiTrip, then your pictures will be
named SkiTrip; SkiTrip(001); SkiTrip(002), etc. until the default name is changed.
3. To rename an individual image when you have taken a picture:
1. With saved image on main display, press Options and select Rename image.
2. Enter a new name for the image.
PICTURE QUALITY
To choose the compression level (memory size) of future pictures:, from Camera
application:
1. Press Options and select Settings. Open Image quality.
2. Select High, Normal, or Basic. The higher image quality you choose, the larger the
file size will be.
If you plan to view pictures on a computer, use High or Normal picture quality so the
quality will be better maintained when enlarged on a computer screen.
Basic picture quality is best when the pictures will be viewed on phones and other small
screens.
SEND PICTURES
Send the picture you just took to your family and friends.
1. With saved image on main display, press , or press Options and select Send >
Via multimedia, Via e-mail, Via Bluetooth, or Via infrared.
2. To complete multimedia messages, see page 42; or E-mail messages on page 44;
or Bluetooth on page 83; or Infrared on page 85.
Note: All three levels are 640 x 480 pixels resolution (sharpness).
X800_China_OI.book Page 60 Tuesday, November 16, 2004 11:25 AM
61
Add a Picture to Contact Card
To add a picture to a Contact card, see Edit Contact Cards on page 32.
Incoming Calls when in Camera Mode
If you receive a call while in camera mode, the phone temporarily suspends camera
mode and switches to the incoming call display. Once you answer the call, the screen
returns to Camera mode and a small active call icon displays. If a captured image is on
the preview screen, it is saved in the Media Gallery Images folder.
X800_China_OI.book Page 61 Tuesday, November 16, 2004 11:25 AM
62
MEDIA
Media menu contains these main options:
GALLERY
Store, play, and manage your pictures, images, video clips, sound clips and streaming
links (web addresses) in the phone memory or miniSD Card. Send media files to friends
and family via multimedia, e-mail, Bluetooth, or infrared.
See Specifications on page 136 for supported media file formats.
VIEW IMAGE, SOUND, AND VIDEO FOLDERS
From Media application:
1. Open Gallery.
2. Phone icon tab shows data stored in phone memory, or scroll to view data stored
on miniSD Card.
3. Select folder:
VIEW IMAGES, ZOOM IN, AND SET AS WALLPAPER
When an individual image is open, you can zoom in/out, rotate and view images full
screen, and do other actions as listed below.
From Media application:
1. Open Gallery.
2. Phone icon tab shows data stored in phone memory, or scroll to view data stored
on miniSD Card.
3. Open Images folder, then scroll to and open desired image.
Gallery PhotoBase RealOne
Video Rec.
Documents See File Manager on page 119 to view your Quickoffice docu-
ments.
Images Scroll to desired image, or open Wallpapers folder to view wall-
paper files. The files can be converted to DCF-Exif file (JPEG)
and saved into DCIM folder in miniSD Card via the option
Export to miniSD. Contact your network operator for availability
of Picture msg. service.
Sound clips Choose Digital sounds folder or Tones folder.
Video clips Video clips.
DCIM
(miniSD Card only)
View pictures taken by Camera or converted by Export to
miniSD from any image.
X800_China_OI.book Page 62 Tuesday, November 16, 2004 11:25 AM
63
4. Press Options and select:
Zoom, Rotate, and Panning Shortcuts
Zoom zooms in; zooms out; zooms in, press again to activate full
screen
Pan and pan up; and pan down; and pan left; and
pan right
Rotate rotates clockwise; rotates counter clockwise
Original Press and hold to go back to original size view
Full screen switches between full screen view and original size view
• If image is not zoomed, scroll to go to next image in the current folder.
PLAY VIDEO, SOUND CLIPS, AND STREAMING MEDIA
Watch video clips and listen to sound clips, or play streaming media. Streaming media is
sound and video stored and played back as it arrives from the Internet or your network
servers; thus the file is not stored on your phone, taking up valuable memory.
From Media application:
1. Open Gallery.
2. Phone icon tab shows data stored in phone memory, or scroll to view data stored
on miniSD Card.
3. Open desired folder(s), then scroll to and open desired video or sound clip. When
choosing a link to streaming media, the phone begins connection process to the
Internet or to your network.
Send > Send file to another device.
Set as wallpaper Set image as wallpaper in standby mode.
Rotate > Rotate image Left or Right in 90 degree steps.
Zoom in / Zoom out Zoom in or out.
Full screen Removes status bar and softkey text to see more of the image.
Normal screen When viewing full screen, press , then select Normal
screen to view status bar and softkey text.
Rename Rename the image.
View details View details such as file format and size, and image creation
time and date.
Add to Favourites Add a shortcut to view image from Favourites.
X800_China_OI.book Page 63 Tuesday, November 16, 2004 11:25 AM
64
•See Player Controls on page 64.
Press Options and select from these additional options:
PLAYER CONTROLS
Video controls
Sound controls
To select buttons on screen, scroll or to move box to button and press :
Volume control
Scroll to increase volume, scroll to decrease volume (note bar scale near top of
screen).
To mute the sound in a video clip, scroll until muted speaker icon appears. To turn
sound back on, scroll . When playing sound clips, the lowest volume setting is level 1.
Note: For streaming media, after the phone successfully connects to the
link (web address of streaming media), there is a short loading
period to prepare playback, then the streaming media begins
playing. See Player Controls on page 64.
Copy to Copy file to phone memory or miniSD Card.
Rename Rename clip.
Gallery downloads > Go to download link for images, videos, or sounds in Browser.
Receive via infrared Receive a file via infrared.
View details View clip details such as file format, size, resolution, and dura-
tion.
Add to Favourites Add a shortcut to view or listen to clip from Favourites.
Settings Adjust multimedia settings (see page 70).
Note:Gallery downloads and Receive via infrared features may not be available.
Play: Press Options and select Play. Video automatically begins
playing when first opened.
Stop: Press Stop softkey.
Pause: Press Pause softkey or press . To resume play, press
and select Continue, or press Options and select Continue.
Fast forward: Press and hold on navigation key during play.
Fast rewind: Press and hold on navigation key during play.
Play: Pause: Rewind:
Stop: Fast forward: Record:
X800_China_OI.book Page 64 Tuesday, November 16, 2004 11:25 AM
65
SEND PICTURES, VIDEO AND SOUND CLIPS
From Media application:
1. Open Gallery.
2. Phone icon tab shows data stored in phone memory, or scroll to view data stored
on miniSD Card.
3. Open respective folder, then highlight desired file.
4. Press Options and select Send > Via multimedia, Via e-mail, Via Bluetooth or
Via infrared.
5. To complete multimedia messages, see page 42; or E-mail messages on page 44;
or Bluetooth on page 83; or Infrared on page 85.
DOWNLOAD PICTURES, VIDEO AND SOUND CLIPS
From Media application:
1. Open Gallery.
2. Press Options and select Gallery downloads > Graphic downloads, Video
downloads, or Tone downloads.
3. The Browser opens. Choose a bookmark site to download the desired media.
IMAGE UPLOADER
Store your personal pictures on an image server and share them with family and friends.
To use this service, (1) you must purchase this service from your wireless service
provider if it is available (2) you must configure an Internet Access Point.
Contact your wireless service provider to obtain the image server settings. Enter the
image server settings in the phone (see page 65).
Set Up Image Server
From Media application:
1. Open Gallery.
2. Scroll to an image to highlight it.
3. Press Options and select Image uploader > Settings.
4. Open Image servers. For the first time, select Yes to define an image server.
Note:The Send option is not available for streaming media.
Note: Free content is available for your X800 phone. For downloading information, visit
www.panasonicbox.com. Availability of this service is dependent on your country/
region or network. The downloaded content is free, however there will be a
communication fee to download.
Gallery downloads feature may not be available.
Note: Image Uploader service can support only JPG format files.
X800_China_OI.book Page 65 Tuesday, November 16, 2004 11:25 AM
66
5. Open each field to enter information:
To edit or add more image servers, press Options and select Edit or New image
server after opening Image servers. You can also delete image servers here.
To change the image server in use if you have set up more than one, open Image
server in use setting and select desired image server.
Upload Images
To upload images to an image uploader service, from Media application:
1. Open Gallery.
2. Scroll to the desired image to upload to highlight it.
3. Press Options and select Image uploader > Upload.
PHOTOBASE
Take pictures, then show them to your friends in a slide show right from your phone.
Remove red eye, crop, rotate, or change brightness and contrast of your pictures before
sharing them. You can also add frames, clip art, and text to your pictures.
TAKE A PICTURE USING PHOTOBASE
From Media application:
1. Open PhotoBase.
2. Open Camera.
3. With the flip open, the main display acts as a viewfinder. Move the phone around to
frame your subject.
4. Press , or press Options and select Snap to take a picture.
The image appears on the display.
To keep the picture in your album, press Keep.
To delete the picture, press Discard.
Image server name Enter a descriptive name for the image server
* Access point in use Choose desired access point from list. See page 96.
User name Enter your user name for the uploader service
Password Enter your password for the uploader service
* Web address Enter the web address of the image server
Auto folder naming Select On to have the current time and date as the default name
for your folders on the server
Note: For customer support and more information on PhotoBase,
visit www.arcsoft.com.
X800_China_OI.book Page 66 Tuesday, November 16, 2004 11:25 AM
67
Before Taking a Picture
To change the zoom, scroll or . To change contrast and brightness, scroll or .
Before taking a picture, if desired, press Options and select:
VIEW PHOTOS
From Media application:
1. Open PhotoBase.
2. Open Album.
3. Scroll to desired photo and open.
• To zoom in or out, press Options and select Zoom In or Zoom Out. Scroll , , ,
or to pan in zoomed images.
• Scroll to view previous photo, scroll to view next photo.
Slide Show
To see a slide show of the photos in your Images folder, from Media application:
1. Open PhotoBase.
2. Open Album.
3. Press Options and select Slide show.
4. Select a time interval between slides, and select a transition effect, for example, Top
to Bottom, to apply as each slide advances to the next.
5. Press Play.
6. Press to exit.
EDIT PHOTOS
From Media application:
1. Open PhotoBase.
2. Open Album.
3. Scroll to highlight desired photo and open.
4. Press Options and select Edit.
5. Press Options and select:
Mode > Choose Frame to add a frame to the picture. Horizontal Pan-
orama and Vertical Panorama allow you to stitch 3 pictures
together.
Picture folder > Choose the memory to store your pictures. Customise allows
you to create a new folder.
Settings Configure camera settings.
Go to album Go to your Album.
Save Save edited photo in place of original photo.
Save as... Enter a new name for edited photo and save as a new file.
X800_China_OI.book Page 67 Tuesday, November 16, 2004 11:25 AM
68
Crop Photos
1. With opened photo on screen, press Options and select Edit.
2. Press Options and select Crop.
3. A dotted cropping box appears. Press to resize the cropping box. Scroll to
make the cropping box taller, scroll to shorten the box. Scroll to widen the box,
scroll to narrow the box size.
4. To move the cropping box within the photo, press Options and select Move. Scroll
as desired to move the cropping box.
• If you have moved the box, select Resize to adjust the box size again.
5. To apply the crop, press Options and select Crop it.
6. To save the cropped photo as a new photo, press Options and select Save as.
Enter a name for the new photo.
ADD CLIP ART, FRAMES TO PHOTOS
1. With opened photo on screen, scroll to go to Workshop screen.
2. Select Clip Art to add clip art or Frame to add frames.
3. Scroll to desired clip art or frame and select.
4. Once the clip art or frame appears on the photo, press Options and select:
5. Press Options and select Send for sending options.
Warp Photos
1. With opened photo on screen, scroll to go to Workshop screen.
2. Select Warp.
3. A black crosshair mark appears on the photo. Scroll , , or to desired spot
where the warp will start. Press to change the mark to red, then scroll in direction
you want the warp to go.
Send > Send photo Via e-mail, Via Bluetooth, Via infrared, or Via
MMS (multimedia).
Rotate left Rotate photo to left.
Rotate right Rotate photo to right.
Brightness/
Contrast
Scroll or to adjust brightness, scroll or to adjust con-
trast.
Remove red-eye Removes red eye from the photo.
Crop See Crop Photos on page 68.
Resize > Resize photo by 200% or by 50%.
Move Scroll , , or
Resize Scroll , to increase, , to decrease
Rotate Scroll , to rotate left, , to rotate right
X800_China_OI.book Page 68 Tuesday, November 16, 2004 11:25 AM
69
• To add more warp points, press as needed to toggle the mark between black
and red.
4. Press Options and select Save, Save as, or Send for desired option.
Add Text to Photos
1. With opened photo on screen, scroll twice to go to Add Text tab.
2. Press Options and select Add new line. Enter text as desired. To edit text, press
Options and select Edit current line, Delete current line, Change text color,
Change text size, and Edit previous/next line.
3. Press Options and select Save, Save as, or Send for desired option.
Community
If available, Community will link to a website to download more clip art and frames, and
provide more information from PhotoBase.
From Applications menu:
1. Open PhotoBase.
2. Open Community. Follow the prompts.
REALONE PLAYER
RealOne Player is a media player that plays your video clips, specific sound clips and
streaming media links (web addresses) stored in the phone memory or miniSD Card.
Video clips attached to messages are automatically played by RealOne Player, without
having to open the player first. Opening video clips from Media Gallery, File Manager,
Browser, and Favourites applications launches the RealOne Player.
See Specifications on page 136 for supported media file formats.
PLAY VIDEO CLIPS AND STREAMING MEDIA
From Media application:
1. Open RealOne.
2. Press Options and select Open > Most recent clips for the last several opened
media files, or Saved clip to locate existing files and links in the phone memory or
miniSD Card.
3. Open desired folder(s), then scroll to and open desired video clip. When choosing a
link to streaming media, the phone begins connection process to the Internet or to
your network.
X800_China_OI.book Page 69 Tuesday, November 16, 2004 11:25 AM
70
•See Player Controls on page 64.
REALONE PLAYER SETTINGS
View and adjust settings for video playback and streaming media links.
From Media application:
1. Open RealOne.
2. Press Options and select Settings.
3. Highlight Video and open.
4. Select from:
To view and adjust streaming media settings, from Media application:
1. Open RealOne.
2. Press Options and select Settings.
3. Scroll to Connection and open.
4. Select Proxy and select No or Yes.
• If you select Yes, then scroll down and enter the Proxy serv. address and the
Proxy port number.
5. Press Back and scroll to select Network. Open Network and select from:
Note: For streaming media, after the phone successfully connects to the
link (web address of streaming media), there is a short loading
period to prepare playback, then the streaming media begins
playing. See Player Controls on page 64.
Contrast Open, then scroll or to change the percentage.
Repeat Select On to repeat playback, or select Off to playback one
time.
Default access point Choose one of the access points you have set up. See Access
Point Settings on page 96.
Online time Select Unlimited, or select User defined to specify the amount
of time before phone will disconnect if there has been no activ-
ity.
Maximum bandwidth Select a maximum bandwidth for streaming media to use.
Connection time-out Select a maximum time period to wait from selecting a stream-
ing link until it connects to the server. Scroll left and right to
move the slider and change the time period.
Server time-out Select a maximum time period to wait for the media server to
begin sending the streaming media. Scroll left and right to move
the slider and change the time period.
Lowest UDP port Type in a User Datagram Protocol port number.
Highest UDP port Type in a User Datagram Protocol port number.
X800_China_OI.book Page 70 Tuesday, November 16, 2004 11:25 AM
71
Incoming Call when Playing Video
If there is an incoming call during playback of video clips, the player pauses the video. It
remains paused in the background during calls. To resume play, return to opened file
and press Options and select Continue.
The player also pauses when an alarm sounds, or a note appears, or you open another
application. When you return to the player, press Options and select Continue.
If you open an application when streaming video is playing, the streaming video pauses,
and stops when the auto disconnect time period is reached. See RealOne Player
Settings on page 70.
VIDEO RECORDER
Record video clips to send to others, or play clips on your phone.
RECORD A VIDEO CLIP
To record nearby sound with the video, see Video Recorder Settings on page 72.
From Media application:
1. Open Video Rec..
2. The main display acts as a viewfinder. Move the phone around to frame your
subject.
3. Press Options and select Record to begin recording. Watch the screen, then move
the phone as needed to keep the scene in view.
• Scroll to zoom in, scroll to zoom out if zoomed in.
• Press Pause to pause recording, press Resume to resume recording.
4. The video recorder records until reaching the clip size limit (specified in File Duration
in Settings), or until you press Stop softkey.
5. Wait for a few seconds while the video clip is saved to Media Gallery Videos folder,
or the miniSD Card according to Video storage setting. The last still image of the
recording remains on screen.
To send the video clip immediately, see Send a Video Clip on page 72.
Note: Video Recorder mode depletes battery power more rapidly. To conserve
your battery, the phone shifts to standby mode after 1 minute if recording
has not started. Press Options and select Continue to return to
viewfinder mode.
X800_China_OI.book Page 71 Tuesday, November 16, 2004 11:25 AM
72
If you do not want to save it, press and select Yes, or press Options and select
Delete.
SEND A VIDEO CLIP
1. With the video clip on screen, press , or press Options and select Send > Via
multimedia, Via e-mail, Via Bluetooth, or Via infrared.
2. To complete Multimedia messages, see page 42; or E-mail messages on page 44;
or Bluetooth on page 83; or Infrared on page 85.
Play a Video Clip
To play the video clip that was just recorded, press Options and select Play.
To play a stored video clip, from Media application:
1. Open Video Rec..
2. Press Options and select Video Album.
3. Continue with step 3 in Play Video, Sound Clips, and Streaming Media on page 63.
VIDEO RECORDER SETTINGS
From Media application:
1. Open Video Rec..
2. Press Options and select Settings.
3. Select from:
PhotoLight
Light up your subject before recording a video clip. See PhotoLight on page 121.
Note: The quality of display images may vary depending on the
object or environment.
Display images may distort when shooting moving objects,
especially in a fast moving environment.
Resolution Choose the size of the display on the screen to be Low or High.
Audio recording Set to On to capture nearby sound as you record. Off turns off
the microphone.
Video name base Enter desired text. For example, if you change the name to
SkiTrip, then your video clips will be named SkiTrip; SkiTrip(01);
SkiTrip(02), etc. until the default name is changed.
Video storage Choose whether video clips are stored in phone memory or on
miniSD Card.
File Duration Choose a fixed size for recorded clips, or unlimited size.
Video quality Choose Low or High.
X800_China_OI.book Page 72 Tuesday, November 16, 2004 11:25 AM
73
Incoming Calls when in Video Recorder Mode
If you receive a call while in video recorder mode, video recording stops and the video
clip is saved. After the calls ends, the last image of the recorded clip displays.
X800_China_OI.book Page 73 Tuesday, November 16, 2004 11:25 AM
74
CONNECTIVITY
Browse the Internet. View and manage your phone’s connections to other devices that
can be connected to the phone, wirelessly and by cables. Synchronise your Contacts
and Calendar entries with your other networked devices. Your network, Internet, e-mail
service providers can help you configure and manage your connection settings using
Device Manager. View your active connections using Connection Manager.
Connectivity menu contains these main options:
BROWSER
Your phone has an XHTML configured wireless Internet browser, allowing you access to
services such as news, weather reports, banking, sports, travel information and stock
quotes.
Wireless web sites are designed to be viewed on mobile phone screens, so they consist
mostly of text and may contain simple graphics. Wireless sites are written in Wireless
Markup Language (WML) and XHTML (Extensible Hypertext Markup Language), which
is different than Hypertext Markup Language (HTML) used in computer Internet
websites and cannot be accessed by wireless phones.
Your phone browser can access WAP 2.0 sites and download games, sound, software,
WBMP images, vCard and vCalendar events and more.
Types of Data Connections
GPRS and data call (CSD) data bearer technologies are used to access the Internet.
GPRS is General Packet Radio Service, a packet based high speed data transfer
technology that allows continuous connection, in which many users share a connection
and packets are transferred only as needed.
Data call, or CSD, is Circuit Switched Data, which uses a dedicated connection much
like ordinary voice phone service.
Browser Operator Modem
Bluetooth Infrared USB
Conn Mgr SyncML Dev Mgr
Note: The types of services and content offered when connected to the
Browser are supplied entirely by your wireless service provider.
X800_China_OI.book Page 74 Tuesday, November 16, 2004 11:25 AM
75
SETUP TO CONNECT TO BROWSER
Before starting; (1) you need a subscription for data services from your wireless service
provider and (2) you must configure an Internet Access Point.
Your wireless service provider may have already completed the Internet Access Point
connection settings, or sent them to you in a message. Contact your wireless service
provider to find out how setup information is furnished.
If you are setting up the Internet Access Point, see page 96.
CONNECT TO THE INTERNET
There are two main ways to store shortcuts to wireless Internet sites. (1) Bookmark list
stores web addresses that you or your wireless service provider saved to the list.
(2) Saved Pages list stores actual WAP pages that you can view online or offline.
From Connectivity application:
1. Open Browser.
2. A list of Internet Access Points and bookmarks appears, and folders may appear.
Your wireless service provider may have loaded links to their services that appear
as bookmarks. Scroll to the desired connection or bookmark and select.
• You can also scroll for the Saved pages list , which stores WAP pages
that you can view offline, and launch to refresh pages.
3. The phone begins connection process.
NAVIGATE THE INTERNET
In general, when connected to the Internet through the Browser:
Shortcut: Press to launch Browser.
Note: Your wireless service provider may have set your phone to go to
the Home page for their services when you launch Browser.
Scroll up , down , left or right by pressing outer edges of
navigation key through the page content.
Select a highlighted item or launch an underlined web page.
Press and hold to open Bookmarks list.
Erase character.
Back - Go backward in navigation history.
Close - Go to Bookmarks or Saved pages view.
Cancel - Ends current download.
Press and hold to disconnect the Browser at any time.
Indicates secure online browsing connection.
X800_China_OI.book Page 75 Tuesday, November 16, 2004 11:25 AM
76
Secure Connections
A secure connection means that the connection to transmit data between the phone and
the network server has been secured and encrypted. Your wireless service provider is
responsible for securing the connection between the network server and Internet sites.
Ask your wireless service provider for details of their secure connection capabilities.
Proceed with caution when downloading files and content or entering sensitive
information.
Online Options
During an Internet connection, you can add and refresh bookmarks, reload pages, and
view active session details.
Press Options and select:
Note: If you go to a site with many graphics, it may take longer for the images to load.
To stop images from loading, see Show images setting on page 78.
Open Open highlighted link.
Accept Accept your text entry to the current page.
Service options > Open a list of commands or actions for the page.
Bookmarks View Bookmarks list.
Save as bookmark Save the web address to your Bookmarks.
View image If there are images on the page, open a list of images. To view a
specific image, scroll to the image and press OK.
Navigation options > Go to web address, History to select a previously viewed page
during current session, Clear cache to delete content in cache
memory, Reload to update current page.
Advanced options > Original screen to fit page into the display of your phone, Save
page to save current page to Saved pages list, Disconnect to
end connection.
Show images Appears if you have set the Show images setting to No in the
Browser settings to allow the images on current page to load.
Send bookmark > Send current page via text message.
Find > Find phone number, e-mail address or web address on current
page.
Details View details and security of current session.
Settings See Browser Settings on page 78.
Service msg. Appears if you have unread WAP push messages.
X800_China_OI.book Page 76 Tuesday, November 16, 2004 11:25 AM
77
When online, you may have calling options from a current page. You can click on a link
to book tickets or order gifts, for example. The link allows you to make a phone call
directly from the browser.
When viewing any Directory services an ‘Add to Contacts’ link may appear. Click on the
link, and a new Contacts entry form displays. Save the entry to return to the browser.
Disconnect from Internet
To disconnect from the Internet, either press and hold , or press Options and select
Exit.
BOOKMARK OPTIONS
Manage your bookmarks when offline or online.
From Connectivity application:
1. Open Browser.
2. Press Options and select:
DOWNLOAD FILES FROM THE INTERNET
You can download ringtones, games, video and sound clips, and applications to your
phone through the Browser. After downloading, the files are saved to the relevant menu
application in the phone.
From Connectivity application:
1. Open Browser.
2. Scroll to App. downloads, Graphic downloads, Theme downloads, Tone
downloads, or Video downloads, and open.
Download Connect to selected bookmark.
Bookmark manager > Move to folder, New folder, Edit bookmark, Add bookmark,
Delete.
Mark/Unmark > Select Mark or Mark all to perform actions to multiple items.
Navigation options > Go to web address or Clear cache.
Advanced options > Add to Favourites to add the bookmark to your Favourites
shortcuts.
Send > Send web address to another device.
Find bookmark Type in one or two characters to go to bookmark titles beginning
with that character
Settings See Browser Settings on page 78.
Note: This feature may not be available.
X800_China_OI.book Page 77 Tuesday, November 16, 2004 11:25 AM
78
3. Scroll to desired bookmark if there is more than one, then open the bookmark. The
phone begins connection process.
4. After connecting to the site, scroll to desired hotlink containing the file and open.
5. After the file is downloaded, it is stored in the menu application in which the file is
opened; for example, a video clip is stored in Gallery.
BROWSER SETTINGS
Check your default access point, specify if you want images to be automatically loaded,
and allow cookies to be stored on the phone.
From Connectivity application:
1. Open Browser.
2. Press Options and select Settings to reach:
Note: Panasonic is not responsible for the performance of downloaded content
or possible corruption of phone software.
The phone may not allow you to copy, modify, transfer or forward some
copyrighted images, ringtones or other content.
Default access point Change default access point for connecting to the Internet
through the Browser
Show images For faster Internet surfing, select No to stop images from auto-
matically loading. When online, press Options and select Show
images on a specific page to load an image.
Font size Select a font size for web page text to appear
Default encoding For the Browser pages to display text characters correctly, select
one from: S. Chin., West. Europ., T. Chinese, Unicode (UTF-8),
Central Eur., Baltic, Cyrillic, Greek, Turkish, Heb. (ISO-Logical),
Hebr. (ISO-Visual), Arabic (ISO), Arabic (Windows), Hebr. (Win-
dows), Cent. Eur. (Wind.), Cyrillic (Windows), Greek (Windows),
Turkish (Wind.), Baltic (Windows) or Automatic.
Cookies Choose Allow to store cookies, which are short text files that a
web server places on your phone for purposes such as present-
ing customised web pages to you.
Security warnings Choose Show or Hide for secure site notification
Conf. DTMF sending Select whether to First time only or Always before sending
DTMF touch tones during a call when online.
X800_China_OI.book Page 78 Tuesday, November 16, 2004 11:25 AM
79
SAVED PAGES
Saved pages are web pages and folders you have stored on the phone to view offline.
From Connectivity application:
1. Open Browser.
2. Scroll to open the Saved pages tab .
3. Scroll to the desired page and select.
4. Press Options and select:
OPERATOR MENU
Your network operator may offer services that you can view using the Browser. Contact
your network operator for availability and types of services offered.
From Connectivity application:
1. Open Operator.
2. In the page, press Options and select:
Open View saved page or open folder.
Back to page Return to page you visited before opening Saved pages.
Reload Download and store the latest version of the saved page.
Saved pages mngr. > Move to folder to move a saved page to a different folder, New
folder, Rename or Delete.
Mark/Unmark > Select Mark or Mark all to perform actions to multiple items.
Navigation options > Clear cache to delete content in cache memory.
Advanced options > Add to Favourites to create shortcut to page from Favourites
application.
Settings See Browser Settings on page 78.
Open Open highlighted link.
Close browser Disconnect from your operator’s service pages.
Navigation options > Go to web address to go to new address, History to select a
previously viewed page during current session, Reload to
update current page.
Advanced options > Original screen to fit page into the display of your phone, Save
page to save current page to Saved pages list, Disconnect to
end connection.
Find > Find phone number, e-mail address or web address on current
page. Start typing for Find field to appear.
Details View details and security of current session.
Settings See Browser Settings on page 78.
X800_China_OI.book Page 79 Tuesday, November 16, 2004 11:25 AM
80
MODEM
You can link together your X800 phone as a modem to a computer or a PDA to access
the Internet.
Link your phone and computer to access the Internet
To use the X800 phone as a modem there are three options; connect using the infrared
port, connect using Bluetooth, or connect using the Panasonic USB Data Cable (EB-
UCX800). See Accessories on page 134 for USB Data Cable information.
Prerequisites
• Set up a dial-up account with an Internet Service Provider (ISP).
• From your ISP, you need the installation CD or your account details (i.e. dial-up
number, user name, password, DNS server addresses) to configure Dial Up
Networking.
• When setting up your Internet account for the first time, select X800 as the
connecting modem device. For more details, contact your ISP. For help using
Windows® Dial Up Networking, search Windows® Help files.
Install X800 as Modem on Computer
The following describes how to set up a computer to connect to your X800. The
procedure described may differ for other software packages.
To install your phone as a modem on a computer, here is an example. On the computer,
select Start > Settings > Control Panel > Modems > Add > Other > Don’t detect my
modem > Standard 33600 bps modem > Communications Port > Virtual Com Port. For
specific instructions on your computer’s operating system, refer to your computer’s on-
line help.
Set Up Connection
From Connectivity application:
1. Open Modem.
2. Align the infrared port of your phone with the infrared port of the computer.
3. Select Connect via infrared, which opens the infrared connection.
• To use Bluetooth, you must start the Bluetooth connection from the computer or
device to which you are connecting. To prepare your phone to connect via
Bluetooth, see Set up Bluetooth on page 82.
• To use USB data cable, you must start the connection from the computer or
device to which you are connecting.
Note: This info may be on CD-ROM.
Note: If connecting with a data cable, select Com 1 in the Communications Port field.
X800_China_OI.book Page 80 Tuesday, November 16, 2004 11:25 AM
81
4. The phone confirms when a connection is established.
• If Bluetooth connection is successful, when you select Connect via infrared, the
phone will state that the modem is already in use by Bluetooth.
Make Connection to Internet
1. Now you can create a new GPRS connection. For example, on the computer, select
Start > Programs > Accessories > Communications > Dial-Up Networking > Make
New Connection. For specific instructions, see your computer’s on-line help.
2. Enter X800 as the name you are dialling, and choose Standard 33600 bps Modem
as the device then select Next. Choose 115200 as the Maximum speed. In the
telephone number field, enter *99# then click Finish.
3. You will now have an X800 connection icon in the computer’s connection screen.
Double click the icon and select Connect to begin the connection.
BLUETOOTH® WIRELESS TECHNOLOGY
Bluetooth wireless technology uses radio waves to communicate with other Bluetooth
devices within a maximum range of 10 metres. You can send and receive business
cards, pictures, Calendar events, video and sound clips, and other data between
Bluetooth devices such as mobile phones and computers.
Use a Bluetooth headset to talk wirelessly on your phone whilst the phone is in your
pocket or purse.
This phone supports Bluetooth v1.1 connectivity with the following profiles: Serial port,
Dial-up networking, Object push, File transfer, Headset, and Handsfree.
Note: To close the connection, press Disconn. softkey. If there is
an on-going data call, the call is ended first.
Note: Although Bluetooth devices can connect within a 10 metre range, walls or
other nearby barriers may cause interference.
Check with local authorities before using Bluetooth wireless technology
as some countries may restrict the use of Bluetooth devices.
Battery note: Keeping Bluetooth setting “On” consumes battery power more
rapidly. To conserve battery power, switch off Bluetooth setting
when not in use. Switch Bluetooth on or off in Settings.
X800_China_OI.book Page 81 Tuesday, November 16, 2004 11:25 AM
82
SET UP BLUETOOTH
You must first set up Bluetooth connections before using it for the
first time. Thereafter, go to the Settings tab to switch Bluetooth
setting on or off and change your phone’s visibility to other Bluetooth
devices.
From Connectivity application:
1. Open Bluetooth.
2. In the Settings tab, open fields:
PAIR WITH OTHER DEVICE AND CONNECT
From Connectivity application:
1. Open Bluetooth.
2. Scroll to Paired devices tab.
3. Ensure that the device in which you want to pair is switched on, and its Bluetooth
setting is activated.
4. Press Options and select New paired device. If Bluetooth setting is switched off,
press Yes to switch on Bluetooth setting.
5. The phone begins searching for devices and notifies you when it finds the other
device.
6. Press Select. Enter the passcode for the connecting device if needed and press
OK. If the other device has not yet been paired, first decide on a passcode with the
other person, then enter it when requested, press OK.
7. To connect with the device, open the device name and select Connect.
Bluetooth Select On or Off.
My phone’s visibility Choose Shown to all to allow other Bluetooth devices to find
your phone when searching, or select Hidden to keep other
Bluetooth devices from finding it during a search.
Visibility Timeout Choose Disabled to keep My phone’s visibility setting as
Shown to all, or scroll to select a time period after which your
phone cannot be found by other Bluetooth devices (My phone’s
visibility setting changes to Hidden).
My phone’s name Use the default name or enter a name for your phone that other
devices will see when they search for your phone.
My Transfer Speed Choose Normal, Fast, or Very Fast.
Note: The passcode may be stated in the connecting device user guide.
X800_China_OI.book Page 82 Tuesday, November 16, 2004 11:25 AM
83
SEND AND RECEIVE DATA VIA BLUETOOTH
You can send and receive Contacts cards as business cards, Calendar events, pictures,
video and sound clips, bookmarks, configuration messages, and receive applications
supported by the phone via Bluetooth.
To send data via Bluetooth:
1. Ensure that the device in which you want to pair is switched on, and its Bluetooth
setting is activated. On your phone, go to the application menu that contains the
data you wish to send, for example, go to Contacts to send a business card.
2. Highlight the desired item to send.
3. Press Options and select Send > Via Bluetooth. If Bluetooth setting is switched
off, press Yes to switch on Bluetooth setting.
4. The phone automatically searches for Bluetooth devices nearby.
• Devices appear one-by-one. If device has already been paired, icon appears
with device name. Press Stop to stop search when intended device name pops
up.
• If the other device has not yet been paired, first decide on a passcode with the
other user, then enter it when requested, press OK.
5. Scroll to the intended device and select. Connecting message appears, then when
other device accepts, a confirmation message displays when transfer is complete.
• If the other device does not accept the data, Bluetooth connection cannot send
the data.
To receive data via Bluetooth:
1. Press Show to accept the incoming message containing the data. (If phone is not in
standby mode, Show does not appear.) The message is placed in the Inbox in
Messages.
2. Open the message, press Options and select Save to save data to phone memory
or miniSD Card. You can rename the file.
MANAGE PAIRED DEVICES
From Connectivity application:
1. Open Bluetooth.
2. Scroll to Paired devices tab and scroll to desired device.
3. Press Options and select:
Note: The phone may not allow you to copy, modify, transfer or forward
some copyrighted images, ringtones or other content.
Note: Confirmation is required first if the paired device is not set as authorised.
New paired device Search for nearby Bluetooth devices.
Assign short name Change name of paired device to an easily recognised name.
X800_China_OI.book Page 83 Tuesday, November 16, 2004 11:25 AM
84
Icons of paired devices
INFRARED
Transfer data between your phone and other infrared enabled devices using an infrared
wavelength connection. You can also use infrared connections for GSM data services,
and access the Internet and e-mail via other devices.
PREPARE FOR INFRARED CONNECTION
Place your phone and the other device within the effective range of the infrared
connection, about 20 cm.
• Verify there are no obstructions between the two devices.
• Ensure that the infrared ports of the devices point at each other.
• On the receiving device, activate the Infrared port.
• If the other device is a computer, you need to set up infrared connection on the
computer. For example, in Windows, select Start > Settings > Control Panel >
Options tab > Enable Infrared Communication. For specific infrared set up
instructions for your computer’s operating system, refer to the computer’s on-line
help.
Set as authorised or
Set as unauthorised
Allow automatic connection without manually accepting each
time, shown by icon. Unauthorised setting requires confirma-
tion each time the device attempts to connect to the phone.
Delete Delete the paired device from your list.
Delete all Delete all paired devices.
audio computer phone miscellaneous
Note: Multiple devices can be paired; however, only one active connection
is possible at any given time.
Note: The phone may not allow you to copy, modify, transfer or forward
some copyrighted images, ringtones or other content.
Caution: This device contains a low power level Class 1 laser product
(Infrared LED), which will not normally harm the eyes. Though
invisible to the eye, do not point the infrared beam at anyone’s
eye. Nearby activated infrared devices may cause interference.
Note: For Windows® 2000 users, to enable infrared use to transfer files,
go to Start > Settings > Control Panel > Wireless Link. In the File
Transfer tab, check ‘Allow others to send files to your computer
using infrared communications’.
X800_China_OI.book Page 84 Tuesday, November 16, 2004 11:25 AM
85
SEND AND RECEIVE DATA VIA INFRARED
You can send and receive Contacts cards as business cards, Calendar events, pictures,
sound clips, bookmarks, configuration messages via infrared, and receive applications
supported by the phone.
To send data via Infrared:
1. Prepare for infrared connection as described on page 84.
2. Go to the application menu that contains the data you wish to send, for example, go
to Contacts to send a business card.
3. Open the item you wish to send.
4. Press Options and select Send > Via infrared.
5. The phone automatically begins infrared connection, indicated by flashing .
Whilst transferring, icon is steady. A confirmation message displays when complete.
To receive data via Infrared:
1. Prepare for infrared connection as described on page 84.
2. From Connectivity application, open Infrared.
3. Flashing icon displays, meaning phone is ready to receive data.
4. Sender can begin transfer of data. A tone sounds when transfer is complete.
5. Press Show to accept the incoming message containing the data. The message is
placed in the Inbox.
6. Open the message, press Options and select Save to save data to supporting
application. You can rename the file.
• If transfer does not begin within 40 seconds, the infrared connection
automatically stops.
USB
Connect to PC Software Suite over your USB cable using USB application.
CONNECT TO PC SOFTWARE SUITE
1. Plug in USB cable into the phone.
2. From the Connectivity application, open USB.
3. USB icon appears indicating that USB connectivity has started.
4. On your computer, begin desired task such as backup or sync.
CONNECT TO MODEM
1. Plug in USB cable into the phone.
2. From the Connectivity application, open Modem.
3. Select Connect via USB.
4. USB icon appears indicating that USB connectivity has started.
5. On your computer, start a connection using the phone as a modem.
X800_China_OI.book Page 85 Tuesday, November 16, 2004 11:25 AM
86
CONNECTION MANAGER
View status, speed, and amount of data transferred for all of your currently active GPRS
and Data call network connections.
VIEW CONNECTION DETAILS
From Connectivity application:
1. Open Conn Mgr.
2. A list of currently active network connections appears, sorted according to starting
time of connection.
3. Scroll to desired connection, press Options and select Details to view name, bearer
(GPRS, data call), status (creating connection, idle, active, on hold, closing
connection or closed), received and sent data amount in bytes, duration, downlink
and uplink transfer speed in kb/sec, dial-up number (data call only), GPRS access
point name (GPRS only), sharing.
END CONNECTIONS
From Connectivity application:
1. Open Conn Mgr.
2. A list of currently active network connections appears, sorted according to starting
time of connection.
3. To end one connection, scroll to desired connection, press Options and select
Disconnect.
To end all active connections, press Options and select Disconnect all.
• If you are ending all connections, the Data call connections are closed first, then
the GPRS connections close in the same order as established.
SYNCHRONISATION
Set up profiles and synchronise your Contacts and Agenda (Calendar) entries with your
other networked devices.
CREATE A NEW SYNC PROFILE
From Connectivity application:
1. Open SyncML.
2. If there are no profiles, select Yes to create a new profile. Or, press Options and
select New sync profile, press Yes.
Note: GPRS connection cannot be closed if it is currently
suspended due to circuit-switched activity.
X800_China_OI.book Page 86 Tuesday, November 16, 2004 11:25 AM
87
3. Enter information in fields. Fields marked in the phone with a red asterisk (*) must
have an entry.
4. Next, scroll to move to Content tab.
5. For each field, press Options and select Change, select Yes.
6. Open Remote database and enter location on the network of each of the
databases.
7. Open Synchronisation type and choose if you want to synchronise in both
directions (Normal), from server to phone (To server only), or from phone to server
(To phone only) for each database.
SYNCHRONISE
If you are synchronising from the server to the phone, you will receive a message in the
Messages Inbox. When you open the message, you are asked if you wish the server to
begin the synchronisation process. If you accept, the process automatically begins.
To begin synchronising from the phone, from Connectivity application:
1. Open SyncML.
2. Highlight desired profile, press Options and select Synchronise.
During synchronisation from either direction, you can follow the process on the phone.
The phone confirms completion.
To cancel synchronisation, press Cancel.
If synchronisation fails, for example, the sync server is busy or the database cannot be
opened, you are notified of the error type.
VIEW OR EDIT SYNC PROFILES AND CONTENT
From Connectivity application:
1. Open SyncML.
2. Highlight desired profile, press Options and select Edit sync profile.
3. Scroll to desired fields to view and open to edit.
If a profile has been synchronised, press Options and select View log to view profile
name; remote server name; date, time, and status of last synchronisation, and details of
content transfer.
* Sync profile name Enter a name if not assigned.
Access point Select desired access point name.
* Host address Enter web address of sync server.
Port Enter port number of sync server.
User name Type your user name for the server.
Password Type in password.
X800_China_OI.book Page 87 Tuesday, November 16, 2004 11:25 AM
88
To view or edit the Content settings, scroll to view the Content tab and continue with
step 6 in Create a New Sync Profile on page 86.
DEVICE MANAGER
Your network, Internet, e-mail service providers can help you configure and manage
your connection settings. These settings can be sent to your phone over the air. Device
Manager menu allows service providers to configure and update these settings from
their servers on your behalf. Settings may include network access points, multimedia, e-
mail, and synchronisation connections.
CONFIGURATION SESSION
A configuration session can be started either from the Device Manager application in the
phone, or from the service provider’s server.
If your service provider intends to start a session, your phone will show a server alert
message. Before the session can begin, your phone asks to activate the server
connection and the profile if they are off. Then the phone asks you to accept that the
server is ready to configure. If you don’t want the session to run, press Reject or
Cancel.
Once the configuration session begins, the phone displays status notes advising the
session stage: connecting to the server, receiving data from the server, processing data,
and disconnection.
To start a configuration session yourself (if server profile is set up), from Connectivity
application:
1. Open Dev Mgr.
2. Scroll to desired server profile in which you wish to start configuration session.
3. Press Options and select Start.
CREATE A NEW SERVER PROFILE
The server profile is the settings needed to connect your phone to a service provider’s
device management server, which handles the configuration session procedure.
From Connectivity application:
1. Open Dev Mgr.
2. If there are no profiles, select Yes to create a new profile. Or, press Options and
select New server profile.
Note: If you set the server profile to accept configuration sessions
without verification, then the session will begin in the background.
View the process by opening Device Manager application.
X800_China_OI.book Page 88 Tuesday, November 16, 2004 11:25 AM
89
3. Enter information in fields. Fields marked in the phone with a red asterisk (*) must
have an entry.
VIEW OR EDIT SERVER PROFILES
From Connectivity application:
1. Open Dev Mgr.
2. Scroll to desired server profile, press Options and select Edit profile, or Delete.
View Session Log
To view the results of a selected server’s last configuration session, from Connectivity
application:
1. Open Dev Mgr.
2. Scroll to desired profile, press Options and select View log.
The log shows name of server configured, results of configuration, date and time, and
errors if any occurred during configuration.
SHORTCUT TO STOP CONFIGURATION SESSIONS
There may be times in which you do not want configuration sessions to run. Instead of
going to each server profile to set Active to not allow device management to be done by
the server, you can set the phone so that device management cannot be done by any
server.
The default setting is to allow device management to be done (Enable configurations).
* Server name Use suggested name or enter your own.
* Server ID Server’s unique ID identifies the remote server.
Server password Server password supplied by service provider so your phone
can verify server.
Access point Select desired access point.
* Host address Server’s web address.
Port Server’s port number.
* User name Type in your user name for the server.
Password Device Manager password supplied by service provider so the
server can verify your phone.
Allow configuration Select Yes to allow device management to be done by this
server.
Accepted Select Yes to allow device management to be done by this
server without Accept command.
X800_China_OI.book Page 89 Tuesday, November 16, 2004 11:25 AM
90
From Connectivity application:
1. Open Dev Mgr.
2. Press Options and select Disable config..
• All server profiles are disabled and no configurations can be done.
To allow configurations to be done again, press Options and select Enable config..
X800_China_OI.book Page 90 Tuesday, November 16, 2004 11:25 AM
91
SETTINGS
Choose your ringtone and theme settings here. Configure your phone, call, connection,
security, call divert, barring, GSM network, and accessory settings. Set the clock,
alarms, and speed dial shortcuts.
Settings menu contains these main options:
RINGTONES
Ringtone profiles are unique ringing tone, alert tones, and volume settings used to alert
you to calls and messages. Choose from General, Silent, Meeting, Outdoor, and
Pager. Each can be modified to suit your situation. You can use ringtones sent in a
message, sent by Bluetooth or infrared connections, recorded with the Recorder
application, or downloaded.
The active ringtone name is displayed in the standby screen, except when General is
active.
ACTIVATE A RINGTONE
From Settings application:
1. Open Ringtones.
2. Scroll to the desired ringtone.
3. Press Options and select Activate.
CHANGE RINGTONES, ALERT TONES AND VOLUME
You can change, or personalise, individual settings within a ringtone. For example, in
General ringtone, change the ringing tone to a ringing tone you downloaded.
From Settings application:
1. Open Ringtones.
2. Scroll to the desired ringtone.
3. Press Options and select Personalise.
Ringtones Themes Settings
Clock SpeedDial Voice
PB Setup About
Note: Free content is available for your X800 phone. For downloading information, visit
www.panasonicbox.com. Availability of this service is dependent on your country/
region or network. The downloaded content is free, however there will be a
communication fee to download.
X800_China_OI.book Page 91 Tuesday, November 16, 2004 11:25 AM
92
4. Scroll to the desired setting:
Ringing and Alert Tone Volume
Ringing and alert tones play only when the phone’s current ringtone is General or
Outdoor. The other ringtones mute playing of ringing tones.
To change the volume of tones when scrolling through the list, go to the Ringing
volume field and adjust volume.
THEMES
Change the visual look of your phone screens without changing the way the phone
works by using Themes. Themes are wallpapers, text and icon colours and sets
packaged in a theme. Themes, or skins, are preinstalled when you purchase your
phone, or you can download and install them yourself.
PREVIEW THEMES
From Settings application:
1. Open Themes.
2. Scroll to the desired theme name.
3. Press Options and select Preview.
Ringing tone Scroll through list of tones. To hear the tone, highlight the tone
name and wait. To stop the tone, press any key. To select a tone,
highlight the tone name and press Select. If you have sub-
scribed to 2 lines, then a setting appears for each line.
Ringing type Choose Ringing, Ascending, Ring once, Beep once, or
Silent.
Ringing volume Scroll to move the volume bars.
Message alert tone Same as Line 1 ringing tone.
Vibrating alert Select On or Off.
Keypad tones Select Off, Level 1, Level 2, or Level 3.
Warning tones Select On or Off.
Alert for If you have set up Contacts groups, select the desired group
name if you want the phone to ring only when members of that
group call. Other incoming calls will have the silent alert.
Profile name Change the name of any ringtone except General.
Note: Free content is available for your X800 phone. For downloading information, visit
www.panasonicbox.com. Availability of this service is dependent on your country/
region or network. The downloaded content is free, however there will be a
communication fee to download.
X800_China_OI.book Page 92 Tuesday, November 16, 2004 11:25 AM
93
ACTIVATE A THEME
From Settings application:
1. Open Themes.
2. Scroll to the desired theme name.
3. Press Options and select Apply.
• When previewing, press Apply to activate the theme.
CHANGE WALLPAPER OR SCREENSAVER
Change the background image of the standby screen or Favourites screen, the colour of
bars and frame boxes, and the screensaver.
From Settings application:
1. Open Themes.
2. Press Options and select Edit; or to edit a specific theme, first scroll to desired
theme before pressing Options:
DOWNLOAD NEW THEMES
You can download themes directly from predetermined web sites without first going to
the Browser application. These links are set by agreements with content providers who
offer the themes.
From Settings application:
1. Open Themes.
2. Press Options and select Theme downloads.
3. A folder displays, containing links to content provider web pages.
• You can add your own links to the folder.
4. Open the folder and scroll to and open desired link.
Note: The appearance of some icons may change when you apply a different theme.
Idle state wallpaper Idle screen. Choose from Default, User defined (your own
image from Gallery or downloaded), other themes, or None.
Colour palette Choose from the default colour or other listed colours for com-
mon bars, icons, and frames.
Screen saver Choose Date and time(Default), or Text (write your own text
message).
Icons Choose from a list of theme set of icons.
Favourites wallpaper Favourites. Choose from Default, User defined (your own
image from Gallery or downloaded), other themes, or None.
Note: When the copy option appears, you can copy themes from
the phone memory to the miniSD Card or in reverse.
X800_China_OI.book Page 93 Tuesday, November 16, 2004 11:25 AM
94
5. Connection to the Browser will begin.
SETTINGS
In the Settings menu, you can configure your phone, call, connection, date and time,
security, call divert, barring, GSM network, and accessory settings.
PHONE SETTINGS
Set the phone language, writing language, and welcome note or
logo here.
From Settings application:
1. Open Settings.
2. Open Phone.
3. With General highlighted, open to select:
Display Settings
Adjust the brightness of the display screen and set a screen saver timeout.
From Settings application:
1. Open Settings.
Note: Some links may be preset by content providers and cannot be deleted.
Phone language Choose a language in which the texts on the displays will
appear. Automatic uses the language dictated by the SIM card.
Writing language Choose a language in which the texts you are writing will
appear, for example, writing a text message.
Dictionary Select On to use the predictive text dictionary to speed up text
entry.
Welcome note or
logo
Default uses the welcome note or image supplied with the
phone, displayed when the phone is switched on. Select Text to
enter your own welcome note. Select Image to place an image
from Media Gallery.
Shutdown animation Select Off to stop the animation shown after switching off the
phone.
Keypad Backlight
Time
To save battery life, select Always off for the keypad backlight
to remain off.
Orig. phone settings Used if a network operator used settings protection in a phone,
and later there is a reason to change the protected settings.
Requires lock code.
X800_China_OI.book Page 94 Tuesday, November 16, 2004 11:25 AM
95
2. Open Phone.
3. Scroll to Display and open. Select and open:
Standby Mode Settings
Choose an application name to display on the left and on the right softkey in standby
mode to use as shortcuts to the respective applications.
From Settings application:
1. Open Settings.
2. Open Phone.
3. Scroll to Standby mode and open. Select and open:
Left selection key Scroll to desired application, press OK.
Right selection key Scroll to desired application, press OK.
CALL SETTINGS
From Settings application:
1. Open Settings.
2. Scroll to Call and open.
3. Scroll to:
Brightness Scroll to lighten the screen, or scroll to darken the screen,
then press OK.
Screen saver timeout Scroll or to choose from 1 minute to 30 minutes of no
activity until screen saver switches on and press OK.
Send my caller ID Choose Set by network, Yes or No. Determines if your mobile
number is presented to the person you are calling. Network
dependent.
Call waiting Press Options and select Check status. If needed, select Acti-
vate. Network will send confirmation message. When activated,
if you are on a call and there is an incoming call, you can put the
first call on hold and answer the second call. See Call Waiting on
page 20.
Automatic redial Select On to redial if the call is not connecting. Press to
stop automatic redialling.
Summary after call Select On to display a brief summary of duration of last call.
Speed dialling Select On to start dialling by a press and hold of preset number
key in standby mode. First, set up Speed dial keys in Settings
(see Speed Dial on page 106).
Anykey answer Select On to answer incoming calls by pressing any key except
, , or .
X800_China_OI.book Page 95 Tuesday, November 16, 2004 11:25 AM
96
CONNECTION SETTINGS
Access Point Settings
Access points are sets of configurations that connect your phone to the Internet and
other services. Your phone uses three main sets of access points: Multimedia (MMS),
Browser, and Internet. Access points must be set up in order to send and receive
multimedia and e-mail messages, use the Browser, use SyncML, use Device Manager,
use your phone as a modem, and download.
Access points use data services to connect. Types of data services your phone can
support are: Data call (Circuit switched data) and GPRS (Packet data). Contact your
wireless service provider to find out about types of data technologies offered and
subscription rates.
Some or all of your access points may be preset in the phone by your wireless service
provider and cannot be modified. The access point configurations may be sent to you in
a smart message by your wireless service provider. You may also be able to add new
access points.
To view, edit, or add new access points, first you must obtain the configurations from
both your wireless and Internet service providers to be entered into the phone.
From Settings application:
1. Open Settings.
2. Scroll to Connection and open.
3. Open Access points to view a list of existing access points.
• D icon indicates data call. G icon indicates GPRS packet data connection.
4. To add a new access point, press Options and select New access point > Use
default settings or Use existing settings. Either build a new access point from
preset default settings, or use an existing access point to edit as needed.
• To edit an access point, press Options and select Edit.
Active clamshell Select On to answer a call by opening the flip clamshell and to
disconnect phone calls by closing the flip clamshell. When set to
Off and you close the flip clamshell during a call, the caller’s
voice switches to the back loudspeaker.
Line in use This setting appears if you have subscribed to Alternate Line
Service, in which you can have two different phone lines with the
same SIM card. Select Line 1 or Line 2.
Line change This setting appears if you have subscribed to Alternate Line
Service (see Line in use setting). You can disable selection of
one of the phone lines. The PIN2 code is required to return use
of a previously blocked line.
X800_China_OI.book Page 96 Tuesday, November 16, 2004 11:25 AM
97
5. Enter information in fields. Fields marked in the phone with a red asterisk (*) must
have an entry. The bearer type you choose determines which fields are presented.
6. From main fields, press Options and select Advanced settings to enter:
* Connection name Enter an easy-to-recall name if not assigned.
Data bearer Select GPRS or Data call.
* Dial-up number
(Data call only)
Enter access point dial-up phone number.
Access point name
(GPRS only)
Enter name supplied by service provider.
User name Type a user name, supplied by service provider, if required.
Prompt password To have the phone ask for the password each time you log on,
select Yes.
Password Type in password, supplied by service provider, if required.
Authentication Select Normal or Secure.
Homepage Type in Internet web address of service.
Data call type
(Data call only)
Determined by your wireless and Internet service providers.
Maximum data speed
(Data call only)
Choose a limit for your connection speed if you are charged
more for higher speeds.
Phone IP address Enter IP address assigned to your phone, if static or dynamic.
Service provider determines if IP address is static or dynamic.
Primary name server Type in primary domain name server IP address.
Second. name server Type in secondary domain name server IP address.
Proxy serv. address Enter the proxy server address for access point.
Proxy port number Type in proxy port number for access point.
Use callback
(Data call only)
Select Yes to use dial back servers.
Callback type
(Data call only)
Select Use server no. for callback, or Use other no.
Callback number
(Data call only)
Enter the phone number the callback server should use.
Use PPP
compression
(Data call only)
Select Yes to use PPP (Point-to-Point Protocol) compression.
Use login script
(Data call only)
Select Yes to use login script defined in Login script field.
X800_China_OI.book Page 97 Tuesday, November 16, 2004 11:25 AM
98
GPRS Settings
From Settings application:
1. Open Settings.
2. Scroll to Connection and open.
3. Scroll to GPRS and open.
4. Open to edit:
Data Call Settings
From Settings application:
1. Open Settings.
2. Scroll to Connection and open.
3. Scroll to Data call and open.
4. Open Online time. Choose a time period to disconnect from the data call if there is
no activity.
DATE & TIME SETTINGS
Date and time settings can be made from the Clock menu. See Clock on page 104.
Login script
(Data call only)
Enter the login script to be used.
Modem initialisation
(Data call only)
If desired, enter a modem initialisation string (AT command
string).
Note: If your wireless service provider has protected some of your
settings, you may not be able to modify them.
GPRS connection Choose When needed to connect to GPRS service only when
you open an application that uses GPRS. After you close the
application, GPRS service will disconnect.
Choose When available to stay continuously connected when
you are in a GPRS service area, in which the GPRS icon
replaces the signal strength icon .
Access point Choose an access point supplied by your service provider to use
the phone as a modem to enable GPRS connection from a com-
puter.
Note: If you selected to attach to GPRS when available and are in
an area without GPRS service, then the phone will attempt
to connect to GPRS service periodically.
X800_China_OI.book Page 98 Tuesday, November 16, 2004 11:25 AM
99
SECURITY SETTINGS
Phone and SIM
Your phone and SIM card have security codes that you can use to limit access to the
phone. Keep a written record of your codes in a secure place.
• Enter PIN code to use phone
The PIN and PIN2 codes (4 to 8 digits), issued by your wireless service provider, protect
your SIM card against unapproved use.
If you set PIN code request to On, then the PIN code must be entered each time the
phone is turned on.
The PIN2 code is required to access certain wireless service provider services such as
Fixed dialling and Call costs. If the PIN2 code is blocked, use the PUK2 code to unblock.
The PIN and PIN2 codes affect only the current SIM card as they are stored in the SIM
card, not the phone memory.
From Settings application:
1. Open Settings.
2. Scroll to Security and open. Open Phone and SIM.
3. Scroll to desired setting and select:
• Enter Lock Code to Use Phone
To prevent unapproved use, you can lock the phone. When the phone is locked, the lock
code must be entered before the phone can be used. The phone lock icon indicates
that the phone is locked.
To unlock the phone, enter the lock code. You may be able to dial the local emergency
number and accept incoming calls when the phone is locked.
Activate Phone PIN Select Yes to require entry of PIN code each time the phone is
switched on. Requires PIN code to activate.
PIN code To change PIN code, enter current PIN code, then new PIN
code twice. Press OK.
PIN2 code To change PIN2 code, enter current PIN2 code, then new PIN2
code twice. Press OK.
Note: If PIN or PIN2 code is entered incorrectly 3 times, the SIM card
locks. Contact your wireless service provider for PUK or PUK2
code (PIN unblock key code). If the PUK or PUK2 code is entered
incorrectly 10 times, the phone will not operate. All information
stored in the SIM card is lost and the SIM card must be replaced.
Shortcut: To lock the phone, press and select Lock phone.
X800_China_OI.book Page 99 Tuesday, November 16, 2004 11:25 AM
100
From Settings application:
1. Open Settings.
2. Scroll to Security and open. Open Phone and SIM.
3. Scroll to desired method and select:
• Fixed Dialling and Closed User Group
Fixed dialling restricts outgoing calls to ‘fixed numbers’ contained in SIM cards that
support this feature. When switched on, dialling any number not on the Fixed dialling list
is not allowed. Call diverting and sending messages to any numbers not on the list is
also not allowed. The PIN2 code is required to set up and use this feature.
Once you enter Fixed dialling, press Options and select New contact or Add from
Contacts to add a phone number to the Fixed dialling list. You can also call, edit, and
delete numbers in the Fixed dialling list.
Some wireless service providers offer Closed User Group feature, which allows the
phone to make and receive calls only from specific groups. The groups are set up with
your wireless service provider at time of subscription purchase.
From Settings application:
1. Open Settings.
2. Scroll to Security and open. Open Phone and SIM.
3. Scroll to desired method and select:
Autolock period Set the phone to lock after a time period of no activity. Select
User defined to type in time period in minutes. Requires lock
code to set.
Lock code To change lock code, enter current lock code, then new lock
code twice. Record the new code in a safe place. The preset
lock code is 12345.
Lock if SIM changed To prevent the phone from being used if an unknown SIM card is
inserted, select Yes.
Caution: If you change the lock code then cannot recall it, your wireless
service provider cannot identify the code. The phone must then
be reset at an authorised service center.
Fixed dialling Enter PIN2 code. Press Options and select New contact or
Add from Contacts to create the fixed dialling list. Press
Options and select Activ. fixed dialling to activate the service.
Closed user group Select Default to activate the service to the default group previ-
ously set up with your wireless service provider. Select On to
activate another group set up previously.
X800_China_OI.book Page 100 Tuesday, November 16, 2004 11:25 AM
101
Certificate Management
Certificates are attachments to electronic messages used to verify senders and
recipients of data over nonsecure networks, such as e-mail servers or the Internet. Two
types of certificates your phone stores are authority and personal.
Authority certificates are downloaded to your phone and are used to check server
certificate signatures and to guarantee that the certificate is issued by a certification
authority (CA).
Personal certificates are issued to you by a certification authority.
Certificates are valid for only a fixed time period and must be renewed periodically. To
renew, contact the certificate issuer.
Before downloading or sending confidential information, check the digital signature and
validity period of the browser gateway or server on the certificate.
The phone will issue a note if the browser or server identity is not authentic, or if you do
not have the correct certificate in your phone.
• View Certificates
From Settings application:
1. Open Settings.
2. Scroll to Security and open.
3. Scroll to Certif. management and open.
• A list of authority certificates displays.
4. Press Options and select Certificate details.
• A list displays with details such as issuer, subject, validity period, certificate
location, certificate format, algorithm, serial number and fingerprint.
• Authority and personal certificates will show different information. If the personal
certificate is on an outside server, it will have different details.
5. Scroll to view personal certificates if available.
• Trust Settings
Check whether certain applications (Browser, Application Manager, or Internet) can use
a selected certificate.
Confirm SIM services Select Yes to view confirmation messages sent between your
phone and the network when you are using SIM application tool
kit services.
Delete server You can reset the trusted provisioning server setting if you have
received settings in a message. Contact the service provider
from which you wish to receive new settings.
X800_China_OI.book Page 101 Tuesday, November 16, 2004 11:25 AM
102
From Settings application:
1. Open Settings.
2. Scroll to Security and open.
3. Scroll to Certif. management and open.
4. Scroll to an authority certificate, press Options and select Trust settings.
5. For each application, select Yes to enable the certificate to verify software, servers,
or browser sites. Select No to disable the certificate from verifying software, servers,
or browser sites.
CALL DIVERT
Divert incoming calls (voice, data) to another number. Network dependent service.
Check status of Call Divert
From Settings application:
1. Open Settings.
2. Scroll to Call divert and open.
3. Press Options and select Check status. Network will send current status message.
Activate Call Divert
From Settings application:
1. Open Settings.
2. Scroll to Call divert and open.
3. Select one or more: All voice calls, If busy, If not answered, If out of reach, If not
available, All fax calls or All data calls.
4. Press Options and select Activate.
5. Select whether calls shall be diverted To voice mailbox or To other number.
6. Enter the phone number and press OK.
•Press Find to go to your Contacts to select a number.
7. Network will send confirmation message.
To cancel call diverts, press Options and select Cancel or Cancel all diverts.
Note: Before you change any trust settings, be sure that you trust
the certificate owner and have verified that the certificate
belongs to the listed owner.
Note: If either If not answered or If not available is selected in step 3, then
after step 6, select a Delay time from the list before calls will be diverted.
X800_China_OI.book Page 102 Tuesday, November 16, 2004 11:25 AM
103
CALL BARRING
Call barring restricts certain types of incoming and/or outgoing calls, using a password
furnished by your wireless service provider. Network dependent service.
Check Status of Call Barring
From Settings application:
1. Open Settings.
2. Scroll to Call barring and open.
3. Press Options and select Check status. Network will send current status message.
Activate Call Barring
From Settings application:
1. Open Settings.
2. Scroll to Call barring and open.
3. Select Outgoing calls, International calls, International calls except to home
ctry., Incoming calls, or Incoming calls when abroad.
4. Press Options and select Activate.
5. Enter Barring password and press OK.
6. Network will send confirmation message.
To cancel call barrings, press Options and select Cancel or Cancel all barrings.
To change the call barrings password, press Options and select Edit barrings passw..
Enter the password furnished by your wireless service provider. Enter, then verify the
new password.
NETWORK SETTINGS
When you are not in your home country or region, you may be able to use a network
which you are not directly subscribed to. This is called roaming.
Select a Network
From Settings application:
1. Open Settings.
2. Scroll to Network and open.
3. Set Operator selection to Automatic to have the phone automatically select a
network when roaming. Set Operator selection to Manual to select a network
yourself from the list, which are networks available in your current area that have a
roaming agreement with your home network.
Note: Local laws may not permit roaming in your home region.
X800_China_OI.book Page 103 Tuesday, November 16, 2004 11:25 AM
104
• Using a Micro Cellular Network
When the phone is using a micro cellular network (MCN), it can display a MCN indicator
in standby mode. Set Cell info display to On to switch on this indicator if you enter an
MCN.
ENHANCEMENT SETTINGS
When you attach a headset or Bluetooth headset enhancement to the phone, you can
set the ringtone (General, Silent, Meeting, Outdoor, Pager) that the phone will use when
the enhancement is attached.
See Ringtones on page 91 to learn about ringtones.
From Settings application:
1. Open Settings.
2. Scroll to Enhancement and open.
3. Scroll to Headset or BT Accessory and open.
4. Select the Default ringtones settings (Active profile, General, Silent, Meeting,
Outdoor, or Pager).
5. Set Automatic answer to On if you want the phone to automatically answer calls
when the enhancement is attached.
• Enhancement in use
Select which enhancement is attached to the phone.
From Settings application:
1. Open Settings.
2. Scroll to Enhancement and open.
3. Open Enhancement in use and select Headset or BT Accessory. BT Accessory
will display when it is detected by the phone.
CLOCK
Choose a digital or analogue clock to appear in standby mode. Set alarm clock and
alarm tone to remind you of events. If the phone is off when alarm time is reached, the
phone switches on and the alarm tone sounds.
SET TIME AND DATE
From Settings application:
1. Open Clock.
2. Press Options and select Settings.
3. Scroll to the desired setting and open; or press Options and select Change:
Time Either type in numbers or scroll to enter time. Scroll to
move among fields.
X800_China_OI.book Page 104 Tuesday, November 16, 2004 11:25 AM
105
SET ALARMS
From Settings application:
1. Open Clock.
2. Press Options and select Set alarm.
3. Enter alarm time by either typing in numbers or scroll . Scroll to move among
fields. Press OK.
If an alarm is already set, you can reset or remove the alarm by pressing Options and
selecting Reset alarm or Remove alarm.
When the Alarm Rings
When alarm time occurs; the alarm tone rings, the backlight flashes, and a message
displays.
To turn off alarm, press Stop.
To quiet the alarm indicators for 5 minutes, press Snooze or any key.
• If the phone is switched off, the phone temporarily switches on and the other alarm
indicators take place.
• If you press Snooze, the phone automatically switches off for 5 minutes, then the
alarm rings again (maximum 5 times).
Date Enter date using same method as time entry
Date format Select format where mm = month, dd = date, yyyy = year
Date separator Choose from symbols [ . : / - ]
Time format Choose 12-hour or 24-hour
Time separator Choose symbols : or .
Clock type Choose Analogue or Digital
Clock alarm tone To choose a tone, scroll through list of ringing tones. To hear the
tone, highlight the tone name and wait. To stop the tone, press
any key. To select a tone, highlight the tone name and press
Select.
Auto time update Select On to update time from the network. Available only if net-
work supported.
GMT offset If Auto time update is not available, select a time zone, which is
offset to GMT time (for example, +05:00 or -05:00).
Daylight-saving Select On to add an offset of +01:00 to the current GMT time.
Note:GMT offset and Daylight-saving settings are
available only if Auto time update is set to Off.
X800_China_OI.book Page 105 Tuesday, November 16, 2004 11:25 AM
106
• If you press Stop, you are asked if you wish to switch the phone on.
The alarm is deleted when you press Stop. If you wish to have an alarm for the next
day, you have to set the alarm again.
SPEED DIAL
Set phone to quickly dial frequently called numbers by pressing 2 keys.
ASSIGN A SPEED DIAL NUMBER
From Settings application:
1. Open SpeedDial.
2. A grid showing numbers 1 through 9 appears.
• If a digit is replaced by an icon, then the corresponding key
has been reserved by your wireless service provider to dial a
special number, for example, to dial the voice mailbox
number.
3. Scroll to a number, press Options and select Assign.
4. Scroll to the desired Contacts card and press Select.
5. Scroll to the desired number and press Select.
CALL A SPEED DIAL NUMBER
To call a preset speed dial number, choose a method:
• From standby mode, press the corresponding number key - and press .
• From the Speed dial menu, scroll to desired number and press , or press
Options and select Call.
CHANGE, REMOVE, OR VIEW SPEED DIAL NUMBERS
From Settings application:
1. Open SpeedDial.
2. Scroll to desired number on grid.
3. Press Options and select Change, Remove, or View number.
Caution: Do not press Yes to switch phone on when you are in an
aircraft, near sensitive medical equipment, at a refuelling
point or when it may cause interference or danger.
X800_China_OI.book Page 106 Tuesday, November 16, 2004 11:25 AM
107
VOICE COMMANDS
Press and hold , say “Voice Dial”, then say a name in your Contacts list and the
phone will dial the number. Press and hold , then say “open Messages” or “open
Camera” and your phone will go directly to the application.
START VOICE COMMANDS
1. Press and hold .
•or from Settings application, open Voice.
2. You will hear the prompt to “Say a command”.
3. Say one of the choices listed on the phone that you wish to use: Voice Dial, Name
Lookup or Open (application).
VOICE DIAL
Dial by Name
To dial by saying the name of the person you wish to call,
1. Press and hold .
2. After the prompt to “Say a command”, say “Voice Dial”.
3. After the prompt to “Say the name or number”, say the full name of a person in your
Contact list, including first name and last name.
4. The name is repeated, and the phone will begin dialling.
• If the name has more than one number in the Contact entry, say the title of the
desired number.
Dial by Number
To dial by saying the phone number,
1. After the prompt to “Say the name or number”, say the digits of the phone number
you wish to dial, without pausing between digits.
2. If the phone recognises the number, it is repeated and the phone will begin dialling.
If the phone is not sure of the number, it displays a list of choices and prompts “did you
say...?” and states the first choice.
• If the number is correct, say “Yes”. If the number is not correct, say “No” to hear the
next possible match, or scroll and select the correct number on the list.
Note: If your phone is set to a language that is not available in Voice Commands,
you can record voice tags to say that will dial numbers. See Voice Tags on
page 109.
Note: Mandarin is the only Chinese language supported by Voice Commands.
X800_China_OI.book Page 107 Tuesday, November 16, 2004 11:25 AM
108
NAME LOOKUP
Look up the Contact information for a person in your Contact list, without automatically
dialling the phone number.
1. Press and hold .
2. After the prompt to “Say a command”, say “Name Lookup”.
3. After the prompt to “Say the name”, say the full name of a person in your Contact
list, including first name and last name.
4. The Contact entry appears on the screen.
OPEN APPLICATION
Open an application by saying “Open”, then say the name of the desired application.
1. Press and hold .
2. After the prompt to “Say a command”, say “Open”, then say the name of the
application, for example, “Messages”.
3. The application opens.
VOICE COMMANDS SETTINGS
1. Press and hold .
2. After the prompt to “Say a command”, press Settings and select from:
Digit Dialling To help the phone recognise the numbers you are saying, open
Select Location and choose a geographic location for the
phone to recognise only numbers that are valid in that location.
Automatic chooses a location based on phone language setting.
If the phone cannot consistently recognise numbers that you are
saying, select Adapt Digits to make recordings to teach the sys-
tem your voice. Select Reset Digits to restore the original rec-
ognition software.
Sensitivity If the phone cannot recognise most of your commands, change
sensitivity toward Reject Less. If the phone recognises too many
mismatches, change sensitivity toward Reject More.
Select Commands or Names. Then scroll up or down to change
the setting.
Choice Lists Choose whether the phone presents choices when the phone
does not recognise your command.
Sound Switch on or off the playback of prompts, names and digits.
Select Name Settings to change the speed or volume of name
playback.
Language Choose from the list of languages that the software will use for
audio prompts, text screens, and your voice recognition.
X800_China_OI.book Page 108 Tuesday, November 16, 2004 11:25 AM

Navigation menu