Panasonic Mobile Communications Development of USA 22A001A GSM PCS Handset w/Bluetooth User Manual X700 OI
Panasonic Mobile Communications Development Corporation of USA GSM PCS Handset w/Bluetooth X700 OI
Contents
operating instructions II
X700_OI.book Page 101 Wednesday, September 1, 2004 6:47 PM From Settings application: 1. Open Settings. 2. Scroll to Security and open. 3. Scroll to Certif. management and open. 4. Scroll to an authority certificate, press Options and select Trust settings. 5. For each application, select Yes to enable the certificate to verify software, servers, or browser sites. Select No to disable the certificate from verifying software, servers, or browser sites. Note: Before you change any trust settings, be sure that you trust the certificate owner and have verified that the certificate belongs to the listed owner. CALL DIVERT Divert incoming calls (voice, data) to another number. Network dependent service. Check status of Call Divert From Settings application: 1. Open Settings. 2. Scroll to Call divert and open. 3. Press Options and select Check status. Network will send current status message. Activate Call Divert From Settings application: 1. Open Settings. 2. Scroll to Call divert and open. 3. Select one or more: All voice calls, If busy, If not answered, If out of reach, If not available, All fax calls or All data calls. 4. Press Options and select Activate. 5. Select whether calls shall be diverted To voice mailbox or To other number. 6. Enter the phone number and press OK. • Press Find to go to your Contacts to select a number. Note: If either If not answered or If not available is selected in step 3, then after step 6, select a Delay time from the list before calls will be diverted. 7. Network will send confirmation message. To cancel call diverts, press Options and select Cancel or Cancel all diverts. 101 X700_OI.book Page 102 Wednesday, September 1, 2004 6:47 PM CALL BARRING Call barring restricts certain types of incoming and/or outgoing calls, using a password furnished by your wireless service provider. Network dependent service. Check Status of Call Barring From Settings application: 1. Open Settings. 2. Scroll to Call barring and open. 3. Press Options and select Check status. Network will send current status message. Activate Call Barring From Settings application: 1. Open Settings. 2. Scroll to Call barring and open. 3. Select Outgoing calls, International calls, International calls except to home ctry., Incoming calls, or Incoming calls when abroad. 4. Press Options and select Activate. 5. Enter Barring password and press OK. 6. Network will send confirmation message. To cancel call barrings, press Options and select Cancel or Cancel all barrings. To change the call barrings password, press Options and select Edit barrings passw.. Enter the password furnished by your wireless service provider. Enter, then verify the new password. NETWORK SETTINGS When you are not in your home country or region, you may be able to use a network which you are not directly subscribed to. This is called roaming. Note: Local laws may not permit roaming in your home region. Select a Network From Settings application: 1. Open Settings. 2. Scroll to Network and open. 3. Set Operator selection to Automatic to have the phone automatically select a network when roaming. Set Operator selection to Manual to select a network yourself from the list, which are networks available in your current area that have a roaming agreement with your home network. 102 X700_OI.book Page 103 Wednesday, September 1, 2004 6:47 PM • Using a Micro Cellular Network When the phone is using a micro cellular network (MCN), it can display a MCN indicator in standby mode. Set Cell info display to On to switch on this indicator if you enter an MCN. ENHANCEMENT SETTINGS When you attach a headset or Bluetooth headset enhancement to the phone, you can set the ringtone (General, Silent, Meeting, Outdoor, Pager) that the phone will use when the enhancement is attached. See Ringtones on page 90 to learn about ringtones. From Settings application: 1. Open Settings. 2. Scroll to Enhancement and open. 3. Scroll to Headset or BT Accessory and open. 4. Select the Default profile settings (Active profile, General, Silent, Meeting, Outdoor, or Pager). 5. Set Automatic answer to On if you want the phone to automatically answer calls when the enhancement is attached. • Enhancement in use Select which enhancement is attached to the phone. From Settings application: 1. Open Settings. 2. Scroll to Enhancement and open. 3. Open Enhancement in use and select Headset or BT Accessory. BT Accessory will display when it is detected by the phone. CLOCK Choose a digital or analogue clock to appear in standby mode. Set alarm clock and alarm tone to remind you of events. If the phone is off when alarm time is reached, the phone switches on and the alarm tone sounds. SET TIME AND DATE From Settings application: 1. Open Clock. 2. Press Options and select Settings. 3. Scroll to the desired setting and open; or press Options and select Change: Time Either type in numbers or scroll move among fields. to enter time. Scroll to 103 X700_OI.book Page 104 Wednesday, September 1, 2004 6:47 PM Date Enter date using same method as time entry Date format Select format where mm = month, dd = date, yyyy = year Date separator Choose from symbols [ . : / - ] Time format Choose 12-hour or 24-hour Time separator Choose symbols : or . Clock type Choose Analogue or Digital Clock alarm tone To choose a tone, scroll through list of ringing tones. To hear the tone, highlight the tone name and wait. To stop the tone, press any key. To select a tone, highlight the tone name and press Select. Auto time update Select On to update time from the network. Available only if network supported. GMT offset If Auto time update is not available, select a time zone, which is offset to GMT time (for example, +05:00 or -05:00). Daylight-saving Select On to add an offset of +01:00 to the current GMT time. Note: GMT offset and Daylight-saving settings are available only if Auto time update is set to Off. SET ALARMS From Settings application: 1. Open Clock. 2. Press Options and select Set alarm. 3. Enter alarm time by either typing in numbers or scroll fields. Press OK. . Scroll to move among If an alarm is already set, you can reset or remove the alarm by pressing Options and selecting Reset alarm or Remove alarm. When the Alarm Rings When alarm time occurs; the alarm tone rings, the backlight flashes, and a message displays. To turn off alarm, press Stop. To quiet the alarm indicators for 5 minutes, press Snooze or any key. • If the phone is switched off, the phone temporarily switches on and the other alarm indicators take place. • If you press Snooze, the phone automatically switches off for 5 minutes, then the alarm rings again (maximum 5 times). 104 X700_OI.book Page 105 Wednesday, September 1, 2004 6:47 PM • If you press Stop, you are asked if you wish to switch the phone on. Caution: Do not press Yes to switch phone on when you are in an aircraft, near sensitive medical equipment, at a refuelling point or when it may cause interference or danger. The alarm is deleted when you press Stop. If you wish to have an alarm for the next day, you have to set the alarm again. SPEED DIAL Set phone to quickly dial frequently called numbers by pressing 2 keys. ASSIGN A SPEED DIAL NUMBER From Settings application: 1. Open SpeedDial. 2. A grid showing numbers 1 through 9 appears. • If a digit is replaced by an icon, then the corresponding key has been reserved by your wireless service provider to dial a special number, for example, to dial the voice mailbox number. 3. Scroll to a number, press Options and select Assign. 4. Scroll to the desired Contacts card and press Select. 5. Scroll to the desired number and press Select. CALL A SPEED DIAL NUMBER To call a preset speed dial number, choose a method: • From standby mode, press the corresponding number key • From the Speed dial menu, scroll to desired number and press and select Call. and press , or press Options CHANGE, REMOVE, OR VIEW SPEED DIAL NUMBERS From Settings application: 1. Open SpeedDial. 2. Scroll to desired number on grid. 3. Press Options and select Change, Remove, or View number. 105 X700_OI.book Page 106 Wednesday, September 1, 2004 6:47 PM VOICE COMMANDS Press and hold , say “Voice Dial”, then say a name in your Contacts list and the phone will dial the number. Press and hold , then say “open Messages” or “open Camera” and your phone will go directly to the application. START VOICE COMMANDS 1. Press and hold • or from Settings application, open Voice. 2. You will hear the prompt to “Say a command”. 3. Say one of the choices listed on the phone that you wish to use: Voice Dial, Name Lookup or Open (application). VOICE DIAL Dial by Name To dial by saying the name of the person you wish to call, 1. Press and hold 2. After the prompt to “Say a command”, say “Voice Dial”. 3. After the prompt to “Say the name or number”, say the full name of a person in your Contact list, including first name and last name. 4. The name is repeated, and the phone will begin dialling. • If the name has more than one number in the Contact entry, say the title of the desired number. Dial by Number To dial by saying the phone number, 1. After the prompt to “Say the name or number”, say the digits of the phone number you wish to dial, without pausing between digits. 2. If the phone recognises the number, it is repeated and the phone will begin dialling. If the phone is not sure of the number, it displays a list of choices and prompts “did you say...?” and states the first choice. • If the number is correct, say “Yes”. If the number is not correct, say “No” to hear the next possible match, or scroll and select the correct number on the list. NAME LOOKUP Look up the Contact information for a person in your Contact list, without automatically dialling the phone number. 1. Press and hold 2. After the prompt to “Say a command”, say “Name Lookup”. 106 X700_OI.book Page 107 Wednesday, September 1, 2004 6:47 PM 3. After the prompt to “Say the name”, say the full name of a person in your Contact list, including first name and last name. 4. The Contact entry appears on the screen. OPEN APPLICATION Open an application by saying “Open”, then say the name of the desired application. 1. Press and hold 2. After the prompt to “Say a command”, say “Open”, then say the name of the application, for example, “Messages”. 3. The application opens. See Voice Commands Settings to choose applications to open. VOICE COMMANDS SETTINGS 1. Press and hold 2. After the prompt to “Say a command”, press Settings and select from: Digit Dialling If the phone cannot consistently recognise numbers that you are saying, select Adapt Digits to make recordings to teach the system your voice. Select Reset Digits to restore the original recognition software. Sensitivity If the phone cannot recognise most of your commands, change sensitivity toward Reject Less. If the phone recognises too many mismatches, change sensitivity toward Reject More. Select Commands or Names. Then scroll up or down to change the setting. Choice Lists Choose whether the phone presents choices when the phone does not recognise your command. Sound Switch on or off the playback of prompts, names and digits. Select Name Settings to change the speed or volume of name playback. Language Choose from the list of languages that the software will use for audio prompts, text screens, and your voice recognition. Application Launcher Check to select applications from the list to open using Open Applications. Contacts Update Each time Voice Commands is opened, it checks your Contacts list for name additions or edits, and if so, automatically reloads the list. If the list is large, the reload requires more time. Select Configure to choose Automatic or Manual reloading. About Copyright information about the voice recognition software. 107 X700_OI.book Page 108 Wednesday, September 1, 2004 6:47 PM PRINT BOY SETUP PrintBoy Setup works with your QuickOffice menu to print your QuickOffice documents wirelessly from your phone to supported printers. From Settings menu: 1. Open PB Setup. 2. On the Drvrs tab is a list of supported printer drivers. Scroll to desired printer. 3. Press Options and select Configure. Select from: Communications Select the method to send data to the printer. Paper Size Choose a paper size. Left Margin Choose desired left margin measurement. 4. After the printer is configured, scroll , press Options and select: Test Print Send a test print. Bluetooth > Select Find Printer to pair with the printer. Set as Default From the Drvrs tab, set the highlighted printer as default. ABOUT View copyright information about the phone and software used on the phone. From Settings application: 1. Open About. 108 X700_OI.book Page 109 Wednesday, September 1, 2004 6:47 PM TOOLS Tools allows you to take care of a variety of tasks in one place. Use the Calculator to make quick calculations. Use the Converter to convert currencies and measurements. Jot down quick notes on the Notepad. Record short voice clips using Recorder. See your files in one place using File Mgr and manage data stored on the miniSD Card. Install Java™ MIDlet (Mobile Information Device) applications using App Mgr. Tools menu contains these main options: Calculator Converter Notepad Recorder miniSD To-do App Mgr File Mgr PhotoLight SIM Tool Kit (optional) CALCULATOR Perform simple mathematic calculations using the calculator. From Tools application: 1. Open Calculator. 2. A virtual calculator displays. Type in first number of calculation, which appears in field near bottom of screen. • To enter a decimal, press . • To erase digits, press • To change number to positive or negative, scroll to positive/ negative button and select. 3. Scroll or to move box to desired mathematic action, press to select. 4. Enter the next number. To get result, scroll to equal button and select. • To view the last result, press Options and select Last result. The left side of the screen serves as a “tape” to record your calculations. Use the double up and double down arrow buttons on the screen to scroll up and down the “tape.” To save a number in calculator memory, select the MS (Memory Save) button. To recall the number, select the MR (Memory Recall) button. Shortcut: To automatically add, subtract, multiply, or divide, enter first number. Press until you reach desired numeric operation, stop pressing , and the operation is inserted. 109 X700_OI.book Page 110 Wednesday, September 1, 2004 6:47 PM CONVERTER Convert a variety of measurements such as world currencies, area, length, volume, temperature, power, and velocity. Set the Base Currency From Tools application: 1. Open Converter. 2. If the Type field is not set to Currency, open and change to Currency. 3. Press Options and select Currency rates. A list of world currencies (3 letter currency codes) appears with the base currency (if set) noted at the top of the screen. • Most commonly used codes are listed first. They are USD = U.S. dollar; EUR = European Union euro, GBP = British pound sterling, JPY = Japanese yen. 4. Scroll to the desired currency code you wish to set as the base, press Options and select Set as base curr.. • Any rates entered earlier are reset to zero. 5. Scroll to desired currency codes and type in currency exchange rates, based on your newly set base currency = 1. • To enter a decimal, press 6. Press Done. 7. Continue with step 3 in Convert Measurements on page 110. Note: To edit the currency rates, press Options and select Currency rates. Convert Measurements From Tools application: 1. Open Converter. 2. Open the Type field, scroll to desired measurement type and press OK. 3. Scroll to first Unit field, press Options and select Select unit. • If converting Currency, press Options and select Change currency. 4. Scroll to the desired unit to convert FROM, and press OK. 5. Scroll to second Unit field, press Options and select Select unit. • If converting Currency, press Options and select Change currency. 6. Scroll to the desired unit to convert TO, and press OK. 7. Scroll to the first Amount field, press to erase zero. Type in desired unit amount to convert. • To enter a decimal, press 110 X700_OI.book Page 111 Wednesday, September 1, 2004 6:47 PM • To enter + and - (for temperature) and E (exponent) symbols, press Converted amount automatically displays in second Amount field. Note: You can also convert amounts in reverse. Type in amount in second field, converted amount automatically displays in first field. NOTEPAD Jot down quick notes into the notepad. Open and edit simple text documents (.txt) saved from text attachments sent using messaging. From Tools application: 1. Open Notepad. 2. Press Options and select New note. To send a note: From Tools application: 1. Open Notepad. 2. Press Options and select Send > Via text message, Via multimedia, Via e-mail, Via Bluetooth or Via infrared. 3. To complete text messages, see page 42; or multimedia messages on page 42; or E-mail messages on page 44; or Bluetooth on page 82; or Infrared on page 84. RECORDER Record voice memos up to 1 minute in length. You can also record a two-way phone conversation. Recorded sound clips are stored in .amr format. Record a Sound Clip From Tools application: 1. Open Recorder. 2. Press Options and select Record sound clip. 3. Begin speaking into microphone. Press Stop to stop recording. • Seconds counter bar near bottom of screen and Length counter both keep track of seconds elapsed. 4. To rename the sound clip to find it in the list, press Options and select Rename sound clip. Play Back a Sound Clip If sound clip was just recorded, go to step 4. Or from Tools application: 1. Open Recorder. 2. Press Options and select Go to Gallery. 3. Open desired folder, then scroll to desired sound clip and open. 111 X700_OI.book Page 112 Wednesday, September 1, 2004 6:47 PM 4. Select on screen Play button. • Volume control - Scroll to adjust volume. Note speaker icon and volume steps in upper part of screen. • To select buttons on screen, scroll or to move box to button and press : Play: Pause: Rewind: Stop: Fast forward: Record: To play a sound clip during a call, open the sound clip from its current location and play. The other person hears the sound clip. Record a Conversation Caution: You are responsible for the security of a recorded message. Ask for the other party’s consent before recording, and abide by local voice recording laws. 1. During a phone conversation, press Clip on page 111. 2. The conversation records. 3. Press Stop to stop recording. and follow steps 1 to 3 in Record a Sound Send a Sound Clip If sound clip was just recorded, go to step 4. Or, from Tools application: 1. Open Recorder. 2. Press Options and select Go to Gallery. 3. Open desired folder, then scroll to desired sound clip. 4. Press Options and select Send > Via multimedia, Via e-mail, Via Bluetooth or Via infrared. 5. To complete multimedia messages, see page 42; or E-mail messages on page 44; or Bluetooth on page 82; or Infrared on page 84. Recorder Settings From Tools application: 1. Open Recorder. 2. Press Options and select Settings. Scroll to: Memory in use Store recordings in Phone memory or miniSD Card Default speaker Choose Loudspeaker or Handset 112 X700_OI.book Page 113 Wednesday, September 1, 2004 6:47 PM Use Recording as a Ringing Tone To use a recording as a ringing tone, record a sound clip as described in Record a Sound Clip on page 111. The new sound clip automatically appears in the Ringing tone lists in the Ringtones, Contacts, Clock, and Calendar alarm applications. See Ringtones on page 90; Assign a Ringing Tone on page 33; and Set Alarms on page 104 to assign ringing tones. miniSD CARD (MEMORY CARD) Backup your phone memory onto the miniSD memory card. MiniSD Cards can be installed into the standard size memory card socket of other devices using the miniSD Card adapter (see Using miniSD Card and miniSD Adapter on page 114). Data file size of miniSD Card may vary with current availability. Remove miniSD Card 1. Press , scroll to Eject miniSD Card and press OK. Wait for file saving or copying process to finish before removing miniSD Card. 2. Continue with Removing miniSD Card on page 10. Format, View Details of miniSD Card Backup Files Warning: Do not format a miniSD Card that contains important software as this destroys all data on the miniSD Card. From Tools application: 1. Open miniSD. A list indicating name, storage capacity, storage used, and storage free displays. 2. Press Options and select: Remove miniSD Card Saves data and closes applications before ejecting miniSD Card Backup phone mem. Backup the phone contents to the miniSD Card 113 X700_OI.book Page 114 Wednesday, September 1, 2004 6:47 PM Restore from card Restore earlier backed up miniSD Card data to the phone memory Format miniSD Card Format other brand miniSD Cards if needed before first use miniSD Card name Write a name or title for the miniSD Card Memory details View number of bytes stored in separate applications such as Calendar, Messages, documents. Also view total memory in use and free memory. Password in some miniSD Cards Some brands of miniSD Cards can be locked from unapproved use by entering a password. If you insert a miniSD Card with locking capability into your phone, the following option items will appear. From Tools application: 1. Open miniSD. 2. Press Options and select: Set password Enter a password to use to lock the miniSD Card. Thereafter, the password must be entered to use the miniSD Card in any device. Remove password Removing the password unlocks the miniSD Card, and it can be used in another device without a password. Change password Change locking password for this miniSD Card. Unlock miniSD Enter the password to unlock the miniSD Card. Using miniSD Card and miniSD Adapter By inserting the miniSD Card into the miniSD adapter, you can use the miniSD Card in an SD memory card compatible personal computer. Back up data and print images using a printer. To insert the miniSD Card into the miniSD adapter: 1. On miniSD adapter, move lock tab into unlocked position. 2. Slide miniSD Card in with notched corner entering the left side of the miniSD adapter first into the pocket until it clicks. 3. Follow manufacturer’s instructions for inserting an SD card in the compatible personal computer and accessing the data. 114 X700_OI.book Page 115 Wednesday, September 1, 2004 6:47 PM WRITE-PROTECT miniSD CARD • To protect important data, move write-protect switch to Lock position. The miniSD Card is write-protected and you cannot write, save, or delete data or format the card. • To write data to the miniSD Card, move write-protect switch to unlocked position. TO-DO LIST Make a list of tasks, and set a deadline and priority for each. Create a New To-do Task From Tools application: 1. Open To-Do. 2. Press Options and select New to-do note. 3. Enter information in fields: Subject Description of task or subject Due date Assign a due date Priority Open and select High, Normal or Low. 4. Press Done to save. Note: In the list of tasks, ! icon means High priority task; - icon means Low priority task. Edit and Mark To-do Tasks From Tools application: 1. Open To-Do. 2. Scroll to the desired task. • To edit, open task and edit information in fields as desired. • To mark the task as completed or to restore task, press Options and select Mark as done, or Mark as not done. Note: A checkmark within a box means task is completed. A blank box means task is unfinished. 115 X700_OI.book Page 116 Wednesday, September 1, 2004 6:47 PM APPLICATION MANAGER The Application Manager allows you to install and manage both Java™ MIDlet (Mobile Information Device) applications and device software installation files. Examples include games, secure information storage, and compression software. You can also view and manage Authority and Personal certificates (see Certificate Management on page 100). View Details of Application From Tools application: 1. Open App Mgr. 2. Scroll to desired application installation file. • Files with extension .sis are device software installation files. Files with extensions .jad or .jar are Java™ applications. 3. Press Options and select View details. • A list displays with details such as name, version, type, certificate and signature details, trust status for MIDlets, application size, application supplier. View Certificate From Tools application: 1. Open App Mgr. 2. Scroll to desired application installation file. 3. Press Options and select View certificate. • A list displays with details such as issuer, subject, validity period, serial number, and fingerprint. See Certificate Management on page 100. Install Application or Software Your phone supports installation of software and applications suitable for the Symbian™ operating system. Because these files are usually large and compressed, be sure to reserve enough time and phone memory for the entire installation procedure. From Tools application: 1. Open App Mgr. 2. Scroll to desired application installation file. 3. Press Options and select Install. Note: Panasonic is not responsible for the performance of downloaded content or possible corruption of phone software. If there is no digital signature or certificate attached to the software or application, the phone issues warnings of the risks of installing without verifying the source. You should only install software or applications from sources that you have personally verified and of which you are absolutely sure. 116 X700_OI.book Page 117 Wednesday, September 1, 2004 6:47 PM You will see messages asking if you wish to continue or cancel during different phases of the installation process. If the installation process is cancelled for some reason, such as the phone runs out of memory, then the installation is not complete, or partial. To complete the partial installation, either delete the partially installed application, or reinstall the application. If there are problems with installation, you can view the installation log or send the installation log to a help desk for troubleshooting. Press Options and select View log or Send log. Remove Application or Software From Tools application: 1. Open App Mgr. 2. Scroll to desired application installation file. 3. Press Options and select Remove. Note: Removing a software application may cause you to not be able to view documents created with that software, and other software may not work if it relies on the removed software. FILE MANAGER Organise and manage files stored in the phone memory and on the miniSD Card. It’s an easy way to find files and folders. View Folders and Files From Tools application: 1. Open File Mgr. 2. A list of folders and files stored in the phone memory appears. Some folders may have sub folders, for example, Images folder has two sub folders - Picture msgs. and Wallpapers. Files that have not been stored in a folder are listed after the folder names. • Scroll to view folders and files stored on the miniSD Card. 3. Scroll to desired folder or file and open. Find Folders and Files Type letters or keywords in a search box to find a folder or file. From Tools application: 1. Open File Mgr. 2. Press Options and select Find. 3. Choose to look in the phone memory or miniSD Card. 117 X700_OI.book Page 118 Wednesday, September 1, 2004 6:47 PM 4. Type in the keyword to find, or just type in a few letters, and press Find. 5. After a brief period of searching, a list of files and folders containing the keyword displays. 6. The list is sorted from closest match first to farthest match last. Folders and files with the same name appear with folder before file. Manage Folders and Files From Tools application: 1. Open File Mgr. 2. Press Options and select: Open Open the selected folder or file. Delete Delete the selected folder or file. Move to folder Move selected item to another folder. Copy to folder Copy selected item to another folder, leaving the original in its current place. New folder Create a new folder. Mark/Unmark Mark or unmark several files at once. Not available for folders. Rename Change name of item. Default folders cannot be renamed. Receive via infrared To receive a file via Infrared, see page 84. View details View name, format type, date and time modified, size in bytes or kilobytes (if item is a folder, size is total of all files and folders inside the folder), whether it is a default folder, amount of sub folders, and amount of files. Memory details View number of bytes stored in separate applications such as Calendar or Messages. Also view total memory in use and free memory. View phone memory on phone memory tab, or scroll for miniSD Card memory. Send Files From Tools application: 1. Open File Mgr. 2. Open desired folder, then open file. 3. Press Options and select Send > Via multimedia, Via e-mail, Via Bluetooth, or Via infrared. 118 X700_OI.book Page 119 Wednesday, September 1, 2004 6:47 PM 4. To complete multimedia messages, see page 42; or e-mail messages on page 44; or Bluetooth on page 82; or Infrared on page 84. Note: The phone may not allow you to copy, modify, transfer or forward some copyrighted images, ringtones or other content. Send is not available if a folder or playlist is highlighted. PHOTOLIGHT Light up your subject before snapping a picture or recording a video clip. To turn on the Photolight, 1. From standby mode, press and hold 2. Open Camera and continue with Take a Picture on page 58. To record a video clip, continue with Record a Video Clip on page 71. To switch off Photolight, return to standby mode, then press and hold Or, you can switch on or off Photolight from Tools application: 1. Open Photolight. Unlike a camera flash, the Photolight does not flash. Photolight remains on until you switch it off. Note: Do not use the Photolight near the eyes. The Photolight is intended as an auxiliary light source for shooting photos in dim areas. It does not produce the intense light of a typical camera flash. Battery note: Keeping Photolight switched on consumes battery power more rapidly. To conserve battery power, switch off Photolight when not in use. Use Photolight as a Flashlight The Photolight can be switched on to use as a small flashlight. 1. In standby mode, press and hold . The Photolight switches on. To switch off the Photolight, return to standby mode, then press and hold • Whether or not you close the flip, the Photolight remains on until you switch it off. • The Photolight also switches off when the phone is switched off. 119 X700_OI.book Page 120 Wednesday, September 1, 2004 6:47 PM SIM TOOL KIT The SIM Tool Kit allows applications existing on the SIM card to interact and operate with your phone. These applications, stored in the SIM memory, are Value Added Services. Your network operator can configure your SIM card with applications that can be seen on your phone as additional menu items. Contact your network operator for further information. 120 X700_OI.book Page 121 Wednesday, September 1, 2004 6:47 PM CALL LOGS Check your recent missed calls, received calls, and dialled numbers. View the amount of data sent and received via GPRS. View details for each incoming and outgoing communication event such as voice calls, text messages, and GPRS connections. These features are SIM card dependent. MISSED CALLS, RECEIVED CALLS, AND DIALLED NUMBERS When you miss an incoming call, a missed call icon and a note displays on the standby screen. Press Show to view the details of the missed call. From Call Logs application: 1. Open Recent calls. 2. Open Missed calls, Received calls, or Dialled nos.. 3. List of last 20 calls appears with caller or dialled phone number (or name if entered in Contacts), date and time of call. Also, scroll or to view lists. Shortcut: To view the Dialled nos. list from the standby screen, press To clear all Recent calls lists (Missed calls, Received calls, and Dialled nos.) at once, open Recent calls, then press Options and select Clear recent calls. Call or Add to Contacts Make a call using a number from the recent calls lists, or add the number to your Contacts list. From Call Logs application: 1. Open Recent calls. 2. Locate desired number in Missed calls, Received calls, or Dialled nos., and highlight. 3. Press Options and select: Call Dial the number. Create message > Select Via text message or Via multimedia to create a new message addressed to the number. Use number Use the number as a base to edit for dialling a similar number. Delete Delete highlighted number. Clear list Erase all numbers from selected list. Add to Contacts > Create new Contacts card or Update existing card using the number. 121 X700_OI.book Page 122 Wednesday, September 1, 2004 6:47 PM CALL DURATION Check duration of last call and accumulated duration of dialled calls, received calls, and all calls. From Call Logs application: 1. Open Call duration. 2. Scroll to view duration of Last call, Dialled nos., Received calls, and All calls (since last counter reset). • Times indicated in hours:minutes:seconds. To clear all Call duration lists (Last calls, Dialled nos., Received calls and All calls) at once, press Options and select Clear timers. To separate Call duration lists into summaries for each of both lines, Line 1, or Line 2, press Options and select Filter timers. Note: Actual times invoiced from your wireless service provider for calls and services may vary from the call timers depending on number of network features purchased, when billing begins and ends, billing rounding off, etc. GPRS DATA COUNTER View the amount of data in kilobytes sent and received by the phone via GPRS data packets, for example, WAP pages, e-mail messages, downloaded ringtones and applications. From Call Logs application: 1. Open GPRS counter. 2. All sent data and All receiv. data amounts display in kilobytes. To clear the GPRS counter, press Options and select Clear counters. Enter the phone lock code and press OK. See Security Settings on page 98. CALL LOGS SETTINGS From Call Logs application: 1. Press Options and select Settings. 2. Scroll to select: Log duration Choose from No log, 1 day, 10 days, or 30 days to store call information in the logs. Show call duration Select Yes to switch on a time elapsed counter to display during a call. 122 X700_OI.book Page 123 Wednesday, September 1, 2004 6:47 PM GENERAL CALL LOGS View details for each incoming and outgoing communication event such as voice calls, text messages, and GPRS connections. From Call Logs application: 1. Scroll to General Logs tab 2. A list of communication events displays. Up arrow icon indicates outgoing or sent; down arrow icon indicates incoming or received events. 3. Press Options and select: View details Scroll to desired event to view details such as direction (in/out), type (voice, data, etc.), duration (for calls). Clear log Clear all events from the log. Filter Separate events into a list by type such as Outgoing, Incoming, Voice calls, Data calls. Add to Contacts > Scroll to desired event to Create new Contacts card or Update existing card using number or address. 123 X700_OI.book Page 124 Wednesday, September 1, 2004 6:47 PM QUICKOFFICE Store your Microsoft® Word, Excel, and PowerPoint® documents on your phone. Edit them right on the phone, then beam or send the new documents to another device, or save them to the miniSD Card. Note: For customer support and more information on Quickoffice, visit www.quickoffice.com. VIEW DOCUMENTS From Quickoffice application: 1. Scroll to Quickword, Quicksheet, or Quickpoint documents tabs. 2. A list of documents in phone memory appears. 3. Press Options and select: Open Open highlighted file. New Create a new document. Browse Select the memory to browse. Open folders as needed to view documents. File management > Sort files to sort by name, size, date or ext., or Scan location to Scan default, Scan mail, or Scan all. Refresh Refresh the list view. Properties View details of highlighted file. Send as Send file Via multimedia, Via e-mail, Via Bluetooth, Via infrared. Delete Delete highlighted file. About product View copyright information about the software. EULA View software license agreement. Note: You can also view and move your documents from File Manager (see page 117). VIEW MICROSOFT® WORD DOCUMENTS Documents open in read-only full screen view. You must press Options and select Edit mode to make edits to a document. Scroll to move one line at a time or scroll to move one page at a time. Go to shortcuts (percentage through the document): Press etc., to go to beginning. 124 for 20%, for 30%, X700_OI.book Page 125 Wednesday, September 1, 2004 6:47 PM Press Options and select: Edit mode Go to Edit mode. Search > Choose Find, Find Next or Replace. Enter text to be located in to choose a search range. Find field. In other fields, scroll Then press Find. Goto > To go to desired place in the document, choose Top, Percent, or Bottom. Zoom > Zoom out, Zoom 100%, or Zoom in document by desired amount. Autoscroll Automatically scroll document line by line. Scroll speed, scroll to decrease speed. Print Print document by sending it via Multimedia, Bluetooth or infrared. to increase EDIT MICROSOFT® WORD DOCUMENTS 1. From an open document, press Options and select Edit mode. 2. Save the document with a new file name. 3. Scroll through the document using: -- move down one line -- move up one line -- move left one space -- move right one space To highlight text to apply a format, press and hold , then scroll or highlight. For more text editing options, see Entering Text on page 23. . The text will Press Options and select: View mode Go to View mode. Font Choose a font name and size to apply to highlighted text. Style > Choose bold, italic, or underline to apply to highlighted text. Alignment > Choose left, centre, or right alignment to apply to highlighted text. Color Choose a colour to apply to highlighted text. Bullet Apply bullet to highlighted text. Search > Choose Find, Find Next or Replace. Enter text to be located in to choose a search range. Find field. In other fields, scroll Then press Find. Print Print document by sending it via Multimedia, Bluetooth or infrared. Note: Tables, pictures or embedded objects in Microsoft® Word documents cannot be displayed on the phone. 125 X700_OI.book Page 126 Wednesday, September 1, 2004 6:47 PM VIEW MICROSOFT® EXCEL DOCUMENTS Documents open in read-only full screen view. Scroll through the document using: -- move down one cell -- move up one cell -- move left one cell -- move right one cell -- toggle between view mode and edit mode Press Options and select: Edit Cell Edit highlighted cell. Worksheets > Select, insert, rename or delete worksheets. Toggle Full Screen Toggle between full screen and reduced screen. Zoom > Choose a size to zoom document. Freeze > Freeze Row, Column or Both for the highlighted cell. Adjust Column Width Scroll to adjust column width. Clipboard > Choose Cut, Copy, Paste or Select All to apply to highlighted cells. Search > Choose Find, Find Next or Replace. Enter text to be located in to choose a search range. Find field. In other fields, scroll Then press Find. Properties Set cursor movement after entry and toggle auto-recalculations. Print Print document by sending it via Multimedia, Bluetooth or infrared. EDIT MICROSOFT® EXCEL DOCUMENTS Documents open in read-only full screen view. -- toggle between view mode and edit mode In edit mode: -- move cursor left within a cell To select cells, press and hold -- move cursor right within a cell , then scroll or Press Options and select: Accept Text Edit Enter the edit. Revert Text Edit Revert to previous cell content. Operators > Choose from list of math operators and commonly used symbols. Functions > Choose from list of spreadsheet functions. Range Select Select a range of cells by highlighting. 126 X700_OI.book Page 127 Wednesday, September 1, 2004 6:47 PM Formatting > Choose from list of formatting. Alignment > Choose Default, Left, Center or Right to apply to highlighted cells. Font > Apply Bold or Underline font style. Color > Apply colour to font or cell. Style > Choose from list of text and number styles. Clipboard > Choose Undo, Cut, Copy, Paste or Select All to apply to highlighted cells. Clear > Clears highlighted cell formatting, formula content, or both. Print Print document by sending it via Multimedia, Bluetooth or infrared. Note: Macros, pictures, graphs or embedded objects in Microsoft® Excel documents cannot be displayed on the phone. VIEW MICROSOFT® POWERPOINT® DOCUMENTS Documents open in outline view. Scroll to move between outline, notes, slide, and thumbnail views. Navigation Shortcuts View Action Outline, Notes, Slide Toggle between full screen and partial screen Slide view full screen Zoom out Zoom in Fit to screen Outline, Notes, Slide Previous slide Next slide Thumb (4 slides per page) Page up Page down Next slide Previous slide Outline Collapse slide Expand slide Collapse all Expand all Edit slide Keypress or or 127 X700_OI.book Page 128 Wednesday, September 1, 2004 6:47 PM Options Menu The Options menu varies in an open PowerPoint® document, depending on which of the 4 views you are using. Press Options and select: Toggle Screen Toggle screen in outline, notes, and slide view. Edit > In outline view, you can edit the entry, insert and delete slides. In notes view, you can edit the entry. Outline > In outline view, expand and collapse one or all slides. Navigate > In all views, move to next or previous page or slide. Goto > Go to another view. Pitch > Start or stop pitch device. Print In outline or notes view, print document by sending it via Multimedia, Bluetooth or infrared. Exit > In thumb view, choose Close and save, Close and save as, or Close and discard. Note: Animation, multimedia, or embedded objects in Microsoft® PowerPoint® documents cannot be displayed on the phone. 128 X700_OI.book Page 129 Wednesday, September 1, 2004 6:47 PM GAMES Your phone is supplied with two games, MicroGolf and Balloon-Headed Boy. Note: For customer support and more information on MicroGolf and Balloon-Headed Boy games, visit the forum at www.morpheme.co.uk. Download Games See Download Files from the Internet on page 76. For customer support of downloaded content, visit the respective supplier’s website. Note: Panasonic is not responsible for the performance of downloaded content or possible corruption of phone software. Free content is available for your X700 phone. For downloading information, visit www.panasonicbox.com. Availability of this service is dependent on your country/region or network. The downloaded content is free, however there will be a communication fee to download. MICROGOLF GAME Play 18 holes of a miniature golf game. From Games application: 1. Open MicroGolf icon. 2. Navigation options: Rotate clockwise: Scroll or press Rotate counterclockwise: Scroll or press Snap direction to the diagonal: Press Increase power: Press or Toggle golfer on or off: Press Toggle manual scroll to see further than ball centered view allows: Press Switch sound on or off: See Options menu. , or . Release to hit the ball. . Scroll for 4 directions to move the view. 129 X700_OI.book Page 130 Wednesday, September 1, 2004 6:47 PM BALLOON-HEADED BOY GAME Move Balloon-Headed Boy through different levels to rescue balloons to bring to the birthday party. Watch out for the frogs! From Games application: 1. Open Balloon-Headed Boy icon. 2. The game may show hints of which key to press to move. 3. Navigation options: Move right: Scroll or press Move left: Scroll or press Move up: Scroll or press Move down: Scroll or press Go back one screen: Press Switch sound on or off: Press when at title screen below speaker icon. 130 X700_OI.book Page 131 Wednesday, September 1, 2004 6:47 PM FAVOURITES Favourites serves as a “bulletin board” storing shortcuts to your frequently used applications or documents stored in phone memory or miniSD Card. OPEN A FAVOURITES SHORTCUT Open Favourites application: 1. Scroll to the desired shortcut; press Options and select Open. Or, press to open. ADD A SHORTCUT TO FAVOURITES 1. Open the item within the application or open the document in which you want to store a shortcut in Favourites. 2. Press Options and select Add to favourites. • Adding to Favourites is available only for certain applications. MANAGE FAVOURITES Open Favourites application: 1. Scroll to the desired shortcut. 2. Press Options and select: Edit shortcut name Change the name of the shortcut. Shortcut icon When this option appears, choose a different icon picture by scrolling through grid. Move A checkmark appears on the shortcut icon. Scroll move to desired location, press OK. List view/Grid view View the shortcuts in a list view or grid view. Delete shortcut Remove shortcut from Favourites. or to Note: The default shortcuts to Today in Calendar, Inbox in Messages, and Notepad cannot be deleted, nor can the icon be changed. To change the wallpaper of the Favourites screen, see Change Wallpaper or Screensaver on page 92. 131 X700_OI.book Page 132 Wednesday, September 1, 2004 6:47 PM ACCESSORIES Many accessories are available for your Panasonic phone. Contact your wireless service provider to purchase Genuine Panasonic accessories. Using non-Panasonic accessories or accessories not recommended by your wireless service provider may result in poor performance of your phone, or even cause an electrical hazard. BATTERY LITHIUM-ION 780 mAh (EB-BSX700) Carry a spare battery. TRAVEL CHARGER (EB-CAX70AU) (EB-CAX70UK) (EB-CAX70CN) (EB-CAX70US) (EB-CAX70EU) Recharge the battery using any electrical outlet. Plugs for use in many countries are available. miniSD CARD MiniSD (secure data) memory card stores sound, video, picture, and voice files. Card memory size varies. miniSD CARD ADAPTER This adapter allows you to use your miniSD Card in a standard SD socket. See miniSD Card (MEMORY CARD) on page 113. Warning: When you use a miniSD Card with an SD Memory Card application device, please insert the card in the miniSD adapter which is included in the package. When you use the card with an SD Memory Card application device, please insert and remove the card with the adapter at the same time and never leave the adapter in the device. CAR CHARGER (DC ADAPTER) (EB-CDX70) Recharge the battery using your vehicle’s cigarette lighter socket. CAR HOLDER (EB-KAX700) Mounted in your vehicle to store your phone. Use with personal handsfree headset for handsfree operation. 132 X700_OI.book Page 133 Wednesday, September 1, 2004 6:47 PM CARRY CASE (EB-YKX700) Clip your case to your clothing or purse to keep your phone close. PERSONAL HANDSFREE HEADSET (EB-EMD87) Plug into your phone and talk without holding the phone to your ear. PRODUCT CD Transfer data between your phone and your PC, using Bluetooth, Infrared, or USB data cable. USB DATA CABLE WITH CHARGING CAPABILITY (EB-UCX700) Use this to connect your phone to a PC to transfer data between them. Use in conjunction with the software provided on the CD-ROM. BLUETOOTH® HEADSET (EB-BHX70) Talk handsfree and without wires. Place the headset on your ear and the phone in your pocket, with no wires connecting the two. BLUETOOTH® CAR KIT Parrot model CK3000 or Parrot model DriveBlue Made by Parrot, these Bluetooth enabled handsfree car kits allow you to use your phone handsfree in your car. Model CK3000 requires installation, model DriveBlue plugs into your car cigarette lighter. How to identify a genuine Panasonic accessory Panasonic produces some of the most advanced mobile phones available. So, as you’d expect from this class leader, the range of accessories are second to none. Most genuine Panasonic accessories will have a label showing an “EB-XXXXX” model number. 133 X700_OI.book Page 134 Wednesday, September 1, 2004 6:47 PM SPECIFICATIONS Size - Length x width x thickness: 96 mm x 49 mm x 24 mm - Weight: 110 g Network bands supported - Standard: GSM900 Class 4 GSM1800 Class 1 GSM1900 Class 1 - Data bearer: GPRS Class 10; CSD Battery - Standard: 780 mAh Lithium Ion - Talk time: 2 to 5 hours - Standby time: 60 to 175 hours - Charging time: approximately 90 to 120 minutes Note: Talk and Standby time are dependent upon network conditions, battery condition, and use of certain features such as data calls, games, Bluetooth, camera. Charging time is dependent on usage and battery conditions. Displays - Main display: 176 x 208 pixels TFT LCD; 65k colours - External display: 64 x 96 pixels CSTN LCD; 56k colours Camera - Type: VGA CMOS - Photolight: Range 1-2 m - Video: H.263 Encode and Decode; MPEG4 Decode; 3GPP OMA compliant streaming - Other features: “Superbright” Photolight; up to 4X Zoom; Frames; Crop Connectivity - Bluetooth: Serial port, Dial-up networking, Object push, File transfer, Headset, and Handsfree profiles (v1.1) - Infrared: SIR (slow infrared) - USB: v1.1 134 X700_OI.book Page 135 Wednesday, September 1, 2004 6:47 PM Software features - Operating System: Symbian v7.0s, Series 60 v2.0 - Browser: WAP 2.0 (WML, XHTML MP, WCSS, cHTML, other) - Java: MIDP2.0, CLDC1.0, JSR 82, 118, 120, 135 - Digital Rights Management security: Forward lock DRM + additional content protection - Messaging: MMS 2.0, SMS, Smart messaging - E-mail: SMTP, IMAP4, POP3, MIME2 - Personal Information Management: Contacts; Calendar; Scheduler; Clocks (NITZ [Network Informed Time Zone], analog, digital); Alarm; Calculator; Converter - SyncML: v1.1.1, Device Management and Data Synchronisation - OMA Client Provisioning - Document Viewer: view/edit native Microsoft® Word, Excel, and PowerPoint® documents - Image Editing: Crop, slide show, panorama, frames - Predictive text: Tegic T9 predictive text input - Voice Recognition: Speaker independent name, continuous digit dial, command and control Content and file formats supported - Still Imaging: JPEG, TIFF, WMF, GIF, BMP, WBMP, PNG, EXIF, MBM, SMS OTA, ICO - Video playback: 3GPP, MPEG4, RealVideo7 and RealVideo8 - Video record: 3GPP - Audio: RealAudio Voice, RealAudio7, and RealAudio8, AMR-NB, AMR-WB, WAV, WVE, MIDI, GSM 6.10, RAW, RMF, XMF, SMAF. Bluetooth audio devices are limited to voice calls - Text: Text/plain - Ringtones: 40+ polyphonic, OTA ringtones - Application installation package: Symbian .sis file - Java: JAD and JAR files - Digital certificates: Yes - can download - vCard: Send/receive business cards (Contacts cards) - vCalendar: Send/receive calendar event 135 X700_OI.book Page 136 Wednesday, September 1, 2004 6:47 PM TROUBLESHOOTING PROBLEMS Problem Remedy Phone does not switch on • Check that the battery is properly installed and charged. • Press and hold for at least two seconds. Short battery life for a new battery Battery life is reduced when: • playing games • leaving Bluetooth switched on • taking pictures with Camera • recording video clips with Video recorder • recording sound clips with Recorder • using the Photolight often • browsing the Internet • downloading data • leaving Cell Broadcast switched on • phone is in a weak service area, requiring more battery power Battery charging indicator does not appear, and phone cannot be switched on when starting battery charge session Allow phone to charge for a few minutes before switching on. Battery may have been fully discharged. Battery fails to charge Do not connect the Travel Charger until after the battery has been installed. Display looks faded Check the Brightness setting (see Display Settings on page 93). Emergency calls cannot be made Check that the antenna symbol is displayed - move to a coverage area and operate your phone when the antenna symbol appears. • Check to make sure the phone is switched on. • If keypad is locked, press Unlock softkey, then press • If phone is locked, enter lock code. Calls cannot be made or received • Check that the network signal strength indicator displays at least one bar. Move to a stronger coverage area. • If no network name appears, the phone may not be registered to a network. Move to another area and watch for the phone to register to a network. • Check Call barring, Fixed dialling, Closed user group, and Call divert settings in Settings application. 136 X700_OI.book Page 137 Wednesday, September 1, 2004 6:47 PM Note: The quality of display images may vary depending on the object or environment. Display images may distort when shooting moving objects, especially in a fast moving environment. Error Messages These are some of the important error messages which may be displayed. Error Message Meaning Unable to install. Unable to install game, ringing tone, application, etc., for various reasons such as not enough memory, or downloading failed. No access points defined. Define now? You need to set up an access point for your phone to access the service you are requesting, such as Multimedia messaging, e-mail, or browsing the Internet. Memory full. Phone memory is full. Delete some files before new files can be stored. See Shared Phone Memory on page 28. No network coverage There is no network service in your current location. Network busy Connection error Network is overloaded with calls or there was an error trying to connect to the network. Unable to send message. Maximum message size is xxx. File size of object attached to message is too large to send. The xxx will be replaced by a file size. You may be able to send the file by infrared, Bluetooth, or transfer by PC Software Suite. Unable to connect. No network coverage. Cannot connect to server you are requesting. Secure connection not available Network cannot establish a secure connection. SIM card registration failed The network cannot register your SIM card. Contact your wireless service provider. PIN code blocked. Enter PUK code: PIN code was entered incorrectly 3 times, therefore the SIM card is locked. Enter the PUK code, supplied by wireless service provider. PIN2 code blocked. Enter PUK2 code: PIN2 code was entered incorrectly 3 times, therefore the SIM card is locked. Enter the PUK2 code, supplied by wireless service provider. SIM card rejected The phone is set to accept only certain SIM cards. It will not accept the currently inserted SIM card. 137 X700_OI.book Page 138 Wednesday, September 1, 2004 6:47 PM COPYRIGHTS © 2004 Panasonic Mobile Communications Co., Ltd. All rights reserved. Information in this document is subject to change without notice. No part of these instructions may be reproduced or transmitted in any form or by any means without obtaining express permission from Panasonic Mobile Communications Co., Ltd. CP8 Patent (CE marking) Copyright © Arcsoft 2004. All rights reserved. Powered by Mascot Capsule®Engine Micro3D Edition Mascot Capsule® is a registered trademark of HI Corporation. Panasonic X700 with Bluetooth® Technology The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Panasonic is under license. Other trademarks and trade names are those of their respective owners. miniSD™ Memory Card Java and all Java based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries This Product Includes Software Licensed from Symbian Ltd. © 1998-2004; this product is based on Symbian OS. This software is based in part of the work of the FreeType Team. This product is covered by one or more of the following patents: United States Patent 5,155,805, United States Patent 5,325,479, United States Patent 5,159,668, United Kingdom Patent 2232861 and France Patent 90 05712. T9® Text Input is licensed under one or more of the following: U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480, 5,945,928, and 6,011,554; Australian Pat. No. 727539; Canadian No. 1,331,057; United Kingdom Pat. No. 2238414B; Hong Kong Standard Pat. No. HK0940329; Republic of Singapore Pat. No. 51383; Euro. Pat. No. 0 842 463 (96927260.8) DE/DK, FI, FR, IT, NL, PT.ES, SE, GB; Republic of Korea Pat. Nos. KR201211B1 and KR226206B1; and additional patents are pending worldwide. 138 X700_OI.book Page 139 Wednesday, September 1, 2004 6:47 PM MicroGolf is Copyright © 2004 Morpheme Limited. All rights reserved. TM Balloon-Headed Boy is Copyright © 2004 Morpheme Limited. All rights reserved. PC Suite Synchronisation includes synchronisation software. © 1996 - 2004 Time Information Services Limited. All rights reserved. VoiceSignal Technologies This product contains software licensed from Nokia Corporation. Copyright © 2004 Nokia Corporation. All rights reserved. This product is licensed under the MPEG-4 patent portfolio license for the personal and non-commercial use of a consumer to (i) encode video in compliance with the MPEG-4 Visual Standard (“MPEG-4 Video”) and/or (ii) decode MPEG-4 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a licensed video provider. No license is granted or implied for any other use. Additional information may be obtained from ‘MPEG LA, LLC’ 139 X700_OI.book Page 140 Wednesday, September 1, 2004 6:47 PM © 2003-2004 Mobility Electronics, Inc. IMPORTANT-READ CAREFULLY: MOBILITY TEXAS, INC. ("LICENSOR") IS WILLING TO LICENSE THIS SOFTWARE TO YOU ONLY IF YOU ACCEPT ALL THE TERMS OF THIS END USER LICENSE AGREEMENT ("EULA"). PLEASE READ THE TERMS CAREFULLY BEFORE YOU INSTALL THIS SOFWARE BECAUSE BY EXERCISING YOUR RIGHTS TO USE THE SOFTWARE, YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS EULA. IF YOU DO NOT AGREE TO THESE TERMS, LICENSOR WILL NOT LICENSE THIS SOFTWARE TO YOU, AND IN THAT CASE YOU SHOULD REMOVE ALL FILES FROM YOUR PHONE, HANDHELD DEVICE, AND/OR PERSONAL COMPUTER. Ownership of the Software This Quickoffice™ software program and other software product(s) included ("Software") and the accompanying written materials, including all intellectual property and confidential information relating to it, are owned or licensed by Licensor and are protected by United States copyright laws, by laws of other nations, and by international treaties. Grant Of License Licensor grants to you the non-exclusive right to use one copy of the Software on a single computer or handheld device ("Device"). You may load one copy into storage memory of one Device and may use that copy, only on that same Device. Restrictions on Use and Transfer If this Software package contains multiple media types, then you may use only the type of media appropriate for your Device. You may not use the other size media on another Device or computer, or loan, rent, transfer, or assign them to another user except as part of the permanent transfer of the Software and all written materials (as provided for below). You may not copy the Software, except that (1) you may make one copy solely for backup or archival purposes, and (2) you may transfer the Software to a single hard disk provided you keep the original solely for backup or archival purposes. You may not copy the written materials. You may permanently transfer the Software and accompanying written materials (including the most recent update and all prior versions) if you retain no copies and the transferee agrees to be bound by the terms of this EULA. Such a transfer terminates your license. You may not rent, lease, allow multiple users, time sharing, use the Software in a service bureau or otherwise transfer or assign the right to use the Software, or any adaptation or part thereof, except as stated in this paragraph. You may not reverse engineer, decompile, or disassemble the Software. Limited Warranty, Disclaimer, and Damages Limitation Licensor warrants that the Software will perform substantially in accordance with the accompanying written materials for a period of 30 days from your purchase date of the Software. LICENSOR DISCLAIMS ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT, WITH RESPECT TO THE SOFTWARE AND THE ACCOMPANYING WRITTEN MATERIALS. LICENSOR DOES NOT WARRANT ERROR-FREE OR UNINTERRUPTED USE OF THE SOFTWARE. This limited warranty gives you specific legal rights. You may have others, which vary from one state, country, or region to another. Some laws prohibit the foregoing limitations, so they may not apply to you. LICENSOR'S ENTIRE LIABILITY AND YOUR EXCLUSIVE REMEDY FOR SOFTWARE THAT DOES NOT MEET THIS LIMITED WARRANTY SHALL BE, AT LICENSOR'S CHOICE, EITHER TO (A) REFUND THE PRICE PAID OR (B) REPLACE THE SOFTWARE IF RETURNED TO LICENSOR WITH A COPY OF YOUR RECEIPT. Any replacement Software will be warranted for the remainder of the original warranty period or 30 days, whichever is longer. This Limited Warranty is void if failure of the Software has resulted from modification, accident, abuse, or misapplication. IN NO EVENT WILL LICENSOR BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY LOSS OF PROFITS, LOST SAVINGS, OR OTHER INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF YOUR USE OR INABILITY TO USE THE SOFTWARE. Because some states, countries, or regions do not allow the exclusion or limitation of liability for consequential or incidental damages, the above limitation may not apply to you. This EULA is governed by the laws of the State of Texas, and may be enforced by Mobility's licensors, including without limitation, Schema Software, Inc. If you have any questions concerning this EULA or wish to contact Licensor for any reason, please write: Mobility Texas, Inc. 5508 W. Plano Parkway, Suite E, Plano, TX 75220; email: support@quickoffice.com, www.quickoffice.com phone: 1 + 214-956-9806 (English only). U.S. Government Restricted Rights. The Software and documentation are provided with Restricted Rights. Use, duplication, or disclosure by the Government is subject to restrictions set forth in subparagraph (c)(1) of The Rights in Technical Data and Computer Software clause at DFARS 252.2277013 or subparagraphs (c)(1)(ii) and (2) of Commercial Computer Software - Restricted Rights at 48 CFR 52.227-19, as applicable. Supplier is Mobility Texas, Inc. 5508 W. Plano Parkway, Suite E, Plano, TX 75093; phone: 1 + 214-956-9806. 140 X700_OI.book Page 141 Wednesday, September 1, 2004 6:47 PM INDEX About (copyrights) 108 Access point settings 95 Accessories 132 Active clamshell 95 Alarm set Calendar 36 Clock 104 Application manager 116 Applications Close 27 Menu map 29 Navigating 25 Open 27 Options softkey 26 Calculator 109 Calendar 36–39 Alarm set 36 Chinese Lunar calendar 39 Create new 36 Send events 39 Settings 38 Views 37 Call Answer by opening flip 95 Answering 18 Duration 122 Ending 22 Handsfree talking 20 Hold or unhold 19 Making 16 Mute or unmute 20 Open applications during 21 Options 19 Volume 20 Call barring 102 Call divert 101 Call logs 121 Call settings 94 Call waiting 20 Calls Dialled 121 Emergency 18 Missed 121 Multi-party (conference) 21 Received 121 Barring 102 Battery Charging 9 Installing 8 Removing 8 Bluetooth 80 Browser 73–78 Bookmarks 76 Connect to Internet 74 Download files from Internet 76 Online options 75 Saved pages 78 Set up 74 Settings 77 Camera 58–61 PhotoLight 119 Picture quality 60 Save pictures 59 Send pictures 60 Take a picture 58 View pictures 60 Cell broadcast messages 56 Certificate management 100 Chinese Lunar calendar 39 Clip art, add to photos 68 Clock 103 Close applications 27 Closed user group 99 Conference calls 21 Connection manager 85 Connection settings 95 Connectivity 73–89 Bluetooth 80 Connection manager 85 Device manager 87 Infrared 83 Operator 78 Synchronisation 85 Contacts 30–35 Create new 30 Edit 32 Find 31 Groups 34 Make a call 31 My numbers 31 Send a Contacts card 34 Service numbers 34 SIM directory 30 Converter 110 141 X700_OI.book Page 142 Wednesday, September 1, 2004 6:47 PM Copyrights 138 Create e-mail messages 44 Create multimedia messages 42 Create text message 42 Data call Access points 95 Definition 73 Device manager 87 Dictionary 23 Slide show 67 View images 62 Zoom 63 Games 129 GPRS Access points 95 Definition 73 GPRS data counter 122 Groups in Contacts 34 Handsfree talking 20 Eject miniSD Card 10, 12 E-mail messages 48 Emergency calls 18 Ending calls 22 Enhancement settings 103 Icons (indicators) 14 Inbox 45 Infrared 83 International calling 18 Internet. See Browser Favourites 131 File manager 117 Fixed dialling 99 Flashlight 119 Frames, add to photos 68 Key functions 12 Keys, lock 12 Gallery 62–66 Add clip art, frames 68 Edit photos 67 Play video, sound clips, and streaming media 63 Player controls 64 Send pictures, video, sound clips 64 142 Language Browser page display 77 Cell broadcast 56 Phone 93 Writing 93 Lock code 98 Lock keys 12 Lock phone 98 Loudspeaker 20 Making a call 31 Mark 26 Media 62–72 Gallery 62 PhotoBase 66 RealOne Player 69 Video recorder 71 Memory details 28 Menu map 29 Messages 40–57 Cell broadcast 56 Create new e-mail 44 Create new multimedia 42 Create new text 42 Create presentation 43 Drafts 51 E-mail (Mailbox) 48 Inbox 45 My folders 47 Outbox 53 Receive new 45 Reports 54 Sent 52 Service command 57 Settings 54 SIM 56 Types 40 miniSD Card Application 113 Installing 10 Removing 10, 12 Missed calls 121 Moving in the applications 25 Multi-party calls 21 Multitasking 27 My numbers 31 X700_OI.book Page 143 Wednesday, September 1, 2004 6:47 PM Navigating in the applications 25 Network settings 102 Notepad 111 RealOne Player 69 Recorder, voice 111 Ringtones 90 On or off, switch phone 16 Open applications 27 Operator menu 78 Options softkey 26 Outbox 53 Overview, phone 11 Phone Memory 28 Overview 11 Settings 93 Switch on or off 16 PhotoBase 66 PhotoLight 119 Photos, edit 67 Picture quality 60 Picture, take 58 PIN code 98 PIN2 code 98 Play video, sound clips, and streaming media 63 Problems 136 Quickoffice 124 Search 28 Security settings 98 Send Calendar events 39 Send Contacts card 34 Send data via Bluetooth 82 Send data via infrared 84 Send DTMF touch tones 20 Send pictures 60, 64 Send sound clips 64 Send video clips 64 Service numbers 34 Settings 93–103 Access point 95 Alarm 104 Barring 102 Call 94 Call divert 101 Certificate management 100 Clock 103 Connection 95 Enhancement 103 Network 102 Phone 93 Security 98 Speed dial 105 SIM card Installing 7 Removing 8 SIM directory 30 Sound clips, play 63 Sound controls 64 Specifications 134 Speed dial 105 Standby mode displays 15 Streaming media, play 63 SyncML 85 Tabs 25 Take a picture 58 Text entry Dictionary for predictive text entry 23 General text entry 23 Themes 91 To-do 115 Tools 109–120 Troubleshooting 136 Unmark 26 USB 84, 133 Video clips, play 63 Video player controls 64 Video recorder 71 Voice commands 106 Voice dial 106 Voice mail 40 Voice recorder 111 Volume Call 20 Player 64 Ringtone 90 Sound clip 64 Video clip 64 143 X700_OI.book Page 144 Wednesday, September 1, 2004 6:47 PM Wallpaper, change 92 Zoom Camera 58 Gallery 63 Video recorder 71 144
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 44 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:35107410-1d5d-4c6a-b076-5b742ea601a3 Modify Date : 2004:11:05 12:10:13-05:00 Create Date : 2004:11:05 12:10:01-05:00 Metadata Date : 2004:11:05 12:10:13-05:00 Document ID : uuid:889f939c-4e2e-4160-9a32-88f7a9a2dc7d Format : application/pdf Title : X700_OI.book Creator : FrameMaker 7.0 Author : lrosenhauer Producer : Acrobat Distiller 5.0.5 (Windows)EXIF Metadata provided by EXIF.tools