Panasonic Mobile Communications Development of USA 23C002A GSM Cellular Mobile Radio with Bluetooth User Manual VS7 AAA

Download:
Mirror Download [FCC.gov]
Document ID	570819
Application ID	BI7bLETBvpU6tP8jf9VOiw==
Document Description	User Guide 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	232.96kB (2911999 bits)
Date Submitted	2005-08-11 00:00:00
Date Available	2005-08-11 00:00:00
Creation Date	2005-08-10 11:54:51
Producing Software	Acrobat Distiller 6.0.1 (Windows)
Document Lastmod	2005-08-10 11:55:40
Document Title	VS7_AAA.book
Document Creator	PScript5.dll Version 5.2.2
Document Author:	shinsei

X800_Safety first_1213.fm
Page 1
Monday, December 13, 2004
4:34 PM
Safety first
Your new phone is a convenient and effective communications tool, but it can be
hazardous when used improperly. To avoid harming yourself or anyone else, please
review the following information before using your phone.
Batteries
Batteries can cause property damage, injury, or burns if the terminals are touched with a
conductive material (for example, metal jewellery, keys, and so on). Therefore, use
caution when handling a charged battery. Additional precautions and notes are listed
below:
• Never throw a battery into a fire; it may explode.
• Fully recharge the battery if the battery is low or as soon as the low-battery alert beeps.
• Do not drop the battery.
• Do not allow bridging of battery contacts with metallic objects.
• Do not remove the battery from the phone while the phone is powered on. Settings you
have changed may revert to their previous settings.
A recyclable lithium ion/polymer battery powers your phone. Please call
1-800-8-BATTERY for information on how to recycle the battery.
Charging devices
Use only Genuine Panasonic charging accessories. Use of attachments not recommended
by Panasonic or your Service Provider may result in fire, electrical shock, or injury.
Panasonic is not responsible for damage caused by using non-Panasonic accessories.
• Do not expose charging adapters to moisture, water, or the weather.
• Do not use an adapter with a damaged cord.
• When using a DC adapter in an automobile, a small amount of electricity flows
through the adapter, even if the phone is turned off. Remove the plug from the
cigarette lighter whenever the phone will be left in the vehicle for long periods of time.
• Always charge the battery in a well ventilated area, not in direct sunlight, between
41°F (5°C) and 95°F (35°C). It is not possible to recharge the battery if it is outside
this temperature range.
• Do not incinerate or dispose of the battery as ordinary trash. The battery must be
disposed of in accordance with local legislation and may be recycled.
Caution: The cigarette lighter must have a 12V negative ground socket. Do not use the
adapter in a vehicle that has a positive ground system.
General
• Do not use the phone in extreme temperature or humidity. The specified operating
temperature range is -22°F to +140°F (-30°C to +60°C).
• Extreme temperatures may have a temporary effect on the operation of your phone.
This is normal and does not indicate a fault.
• Do not expose the phone (particularly the display) to direct sunlight for extended
periods of time or to a humid, dusty or hot area.
• Do not attempt to disassemble the phone. There are no user-serviceable parts inside.
X800_Safety first_1213.fm
Page 2
Monday, December 13, 2004
4:34 PM
• Do not subject the equipment to excessive vibration or shock.
• Do not expose the phone to rain or spill liquids on it. If the equipment becomes wet
immediately remove the battery and charging device and contact your dealer.
• Do not use any accessories other than those designed for use with your phone.
• Use of attachments not recommended or sold by Panasonic or your Service Provider
may result in fire, electrical shock, or injury.
• Panasonic is not responsible for damages caused by using non-Panasonic accessories.
• Pressing any of the keys may produce a loud tone. Avoid holding the phone close to
the ear while pressing the keys.
• Keep metallic items that may accidentally touch the battery terminals away from the
equipment. Battery damage may occur.
• When disposing of any packing materials or old equipment check with your local
authorities for information on recycling.
• If connecting the phone to an external source, read the operating instructions of the
equipment for the correct connection and safety precautions.
• If connecting the phone to an external source, verify that the phone is compatible with
the product to which you are connecting it.
Availability of service
This phone, like any wireless phone, operates using radio signals, wireless and landline
networks, and user-programmed functions. Because of this, connection in all conditions
cannot be guaranteed. Therefore, you should never rely solely on any wireless phone for
essential communications (for example, medical emergencies).
Emergency (911) service
If you need to make an emergency (911) call, power the phone on, dial 911, and press D.
Emergency calls can be made regardless of lock setting and with or without a SIM card.
Remember, to make or receive any call, the phone must be switched on and in a service
area that has adequate signal strength. Even if you are within the coverage area of your
Service Provider, you may be in an area with insufficient signal strength to place a 911
call. Emergency calls might not be possible on all wireless phone networks or when
certain network service and/or phone features are in use.
X800_Safety first_1213.fm
Page 3
Monday, December 13, 2004
4:34 PM
Safety tips
Following the suggestions in this section will help ensure safe and efficient operation of
your Panasonic phone.
This Model Phone Meets The Government’s Requirements For Exposure To Radio
Waves.
Your wireless phone is a radio transmitter and receiver. It is designed and manufactured
not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the
Federal Communications Commission of the U.S. Government. These limits are part of
comprehensive guidelines and establish permitted levels of RF energy for the general
population. The guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of scientific studies.
The standards include a substantial safety margin designed to assure the safety of all
persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of measurement known
as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. Tests
for SAR are conducted using standard operating positions specified by the FCC with the
phone transmitting at its highest certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified power level, the actual SAR level
of the phone while operating can be well below the maximum value. This is because the
phone is designed to operate at multiple power levels so as to use only the power required
to reach the network. In general, the closer you are to a wireless base station antenna, the
lower the power output.
Before a phone model is available for sale to the public, it must be tested and certified to
the FCC that it does not exceed the limit established by the government-adopted
requirement for safe exposure. The tests are performed in positions and locations (e.g., at
the ear and worn on the body) as required by the FCC for each model. The highest SAR
value for this model phone when tested for use at the ear is 0.412 W/kg and when worn
on the body, as described in this user guide, is 0.200 W/kg. (Body-worn measurements
differ among phone models, depending upon available accessories and FCC
requirements). While there may be differences between the SAR levels of various phones
and at various positions, they all meet the government requirement for safe exposure.
The FCC has granted an Equipment Authorization for this model phone with all reported
SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR
information on this model phone is on file with the FCC and can be found under the
Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID
NWJ23C002A.
Additional information on Specific Absorption Rates (SAR) can be found on the Cellular
Telecommunications Industry Association (CTIA) web-site at
http://www.wow-com.com.
Caution: All Panasonic branded accessories are tested and comply with FCC RF
exposure requirements. Non-Panasonic accessories may not comply.
X800_Safety first_1213.fm
Page 4
Monday, December 13, 2004
4:34 PM
Body-worn operation
This device was tested for body-worn operations with the back of the phone kept 1.5 cm.
from the body. To maintain compliance with FCC RF exposure requirements, use only
belt-clips, holsters or similar accessories that maintain a 1.5 cm. separation distance
between the user’s body and the back of the phone. The use of belt-clips, holsters and
similar accessories should not contain metallic components in its assembly. The use of
accessories that do not satisfy these requirements may not comply with FCC RF exposure
requirements, and should be avoided.
Antenna care
This mobile phone incorporates an internal antenna for radio communisation. Do not use
the phone if it is damaged. Unauthorized antennas, modifications, or attachments could
damage the phone and may violate FCC regulations.
Driving
Important: Check the laws and regulations on the use of wireless telephones in the areas
where you drive. Always obey them. Also, if using your phone while driving:
• Give full attention to driving - driving safely is your first responsibility;
• Use handsfree operation, if available;
• Pull off the road and park before making or answering a call if driving conditions so
require.
Electronic devices
Most modern electronic equipment is shielded from RF signals. However, certain
electronic equipment may not be shielded against the RF signals from your wireless
phone.
Pacemakers: The Health Industry Manufacturers Association recommends that a
minimum separation of 6 inches (6”) or 15 centimeters (15 cm) be maintained between a
handheld wireless phone and a pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent with independent research and
recommendations of Wireless Technology Research.
Persons with pacemakers:
• Should ALWAYS keep the phone more than six inches from their pacemaker when
the phone is turned ON;
• Should not carry the phone in a breast pocket;
• Should use the ear opposite the pacemaker to minimize the potential for interference;
• If you have any reason to suspect that interference is taking place, turn your phone
OFF immediately.
X800_Safety first_1213.fm
Page 5
Monday, December 13, 2004
4:34 PM
Hearing Aids: Some digital wireless phones may interfere with some hearing aids. In the
event of such interference, consult your Service Provider and hearing aid manufacturer.
Other Medical Devices: If you use any other personal medical device, consult the
manufacturer of your device to determine if it is adequately shielded from external RF
energy. Your physician may be able to assist you in obtaining this information.
Turn your phone OFF in health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be using equipment that could
be sensitive to external RF energy.
Vehicles: RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles. Check with the manufacturer or its representative regarding
your vehicle. You should also consult the manufacturer of any equipment that has been
added to your vehicle.
Posted Facilities: Turn your phone OFF in any facility where posted notices so require.
Aircraft
FCC regulations prohibit using your phone while in the air; switch off your phone before
boarding an aircraft unless otherwise advised by airline personnel.
Blasting areas
To avoid interfering with blasting operations, turn your phone OFF when in a “blasting
area” or in other areas posted: “Turn off two-way radio.” Obey all signs and instructions.
Potentially explosive atmospheres
Turn your phone OFF when in any area with a potentially explosive atmosphere and obey
all signs and instructions. Sparks in such areas could cause an explosion or fire resulting
in bodily injury or even death.
Areas with a potentially explosive atmosphere are often, but not always, clearly marked.
They include fueling areas such as gas stations; below deck on boats; fuel or chemical
transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or
butane); areas where the air contains chemicals or particles, such as grain, dust or metal
powders; and any other area where you would normally be advised to turn off your
vehicle engine.
For vehicles equipped with an air bag
An air bag inflates with great force. DO NOT place objects, including both installed or
portable wireless equipment, in the area over the air bag or in the air bag deployment area.
If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious
injury could result.
For U.S. Customers: Vehicles using liquefied petroleum gas (such as propane or butane)
must comply with the National Fire Protection Standard (NFPA-58).
For a copy of this standard, contact:
National Fire Protection Association
One Batterymarch Park
PO Box 9101
Quincy, MA 02269
Phone: 1-800-344-3555
Web site: www.nfpa.org E-mail address: Custserv@NFPA.org
FCC/CE/IC STATEMENTS
DECLARATION OF CONFORMITY WITH FCC RULES FOR
ELECTROMAGNETIC COMPATIBILITY
We, Panasonic Mobile Communications Co., Ltd., declare under our sole
responsibility that the product,
EB-VS7
to which this declaration relates, this device complies with Part 15 of the FCCRules. Operation is subject to the
to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Caution: Exposure to Radio Frequency Radiation.
This device and its antenna must not be co-located or operating in conjunction with any other antenna or
transmitter.
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection. This equipment generates, uses
and can radiated radio frequency energy and, If not installed and used in accordance with the instructions, may cause
28
FCC/CE/IC STATEMENTS
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Modifications
The FCC requires the user to be notified that any changes or modifications to this device that are not expressly
approved by Panasonic may void the users authority to operate the equipment.
Canada-Industry Canada (IC)
The wireless radio of this device complies with RSS 139 & RSS 210 Industry Canada. This Class B digital complies with
Canadian ICES-003.
Cet appareil numérique de la classe B conforme á la norme NMB-003 du Canada.
Europe-European Union Notice
Radio products with the CE 0560 or CE alert marking comply
with the R&TTE Directive (1995/5/EC) issued by the Commission
of the European Community.
29
TEN (10) DRIVER SAFETY TIPS
Your wireless telephone gives you the powerful ability to communicate by voice-almost anywhere,
anytime. But an important responsibility accompanies the benefits of wireless phones, one that
every user must uphold.
When driving a car, driving is your first responsibility. When using your wireless phone behind the
wheel of a car, practice good common sense and remember the following tips:
1. Get to know your wireless phone and its features such as speed dial and redial. If
available, these features help you to place your call without taking your attention off the
road.
2. When available, use a hands free device. If possible, add an additional layer of
convenience and safety to your wireless phone with one of the many hands free
accessories available today.
3. Position your wireless phone within easy reach. Be able to access your wireless
phone without removing your eyes from the road. If you get an incoming call at an
inconvenient time, if possible, let your voice mail answer it for you.
4. Let the person you are speaking with know you are driving; if necessary,
suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet,
snow, ice, and even heavy traffic can be hazardous.
5. Do not take notes or look up phone numbers while driving. Jotting down a "to do"
list or flipping through your address book takes attention away from your primary
responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place calls when you are not
moving or before pulling into traffic. Try to plan calls when your car will be
stationary. If you need to make a call while moving, dial only a few numbers, check the
road and your mirrors, then continue.
7. Do not engage in stressful or emotional conversations that may be distracting.
Make people you are talking with aware you are driving and suspend conversations
that have the potential to divert your attention from the road.
8. Use your wireless phone to call for help. Dial 9-1-1 or other local emergency number
in the case of fire, traffic accident or medical emergencies. Remember, it is a free call
on your wireless phone!
9. Use your wireless phone to help others in emergencies. If you see an auto
accident, crime in progress or other serious emergency where lives are in danger, call
9-1-1 or other local emergency number, as you would want others to do for you.
10. Call roadside assistance or a special non-emergency wireless assistance
number when necessary. If you see a broken-down vehicle posing no serious hazard,
a broken traffic signal, a minor traffic accident where no one appears injured, or a
vehicle you know to be stolen, call roadside assistance or other special non-emergency
wireless number.
"The wireless industry reminds you to use your phone safely when driving."
For more information, please call 1-888-901-SAFE or
visit www.wow-com.com
Information on this page provided by the Cellular Telecommunications Industry
Association.
Safety First
VS7_AAA.book
Page i
Wednesday, August 3, 2005
VS7
5:10 PM
Operating Instructions
Contents
Introduction .................... 1
Contacts .........................41
Safety considerations............. 1
Care and maintenance........... 5
About this manual .................. 7
Contacts menu structure.......41
Viewing the Contacts list.......42
Making a call from
Contacts............................43
Adding contacts ....................44
Editing a Contacts card.........46
Call log..................................47
Speed dial.............................48
Groups ..................................49
Advanced..............................49
Service numbers...................52
About Your Phone........ 10
Phone overview.................... 10
Key functions........................ 12
Display ................................. 15
DRM ..................................... 17
Indicator/Illumination Light ... 18
Getting Started ............. 19
Installing the SIM card and
the battery ........................ 19
Charging the battery............. 21
Opening/closing the phone .. 23
Switching the phone on/off... 23
Menu Navigation........... 24
Main menu structure ............ 24
Displaying the menu............. 25
Navigating the applications .. 26
Basic Operations.......... 27
Making calls ......................... 27
Answering calls .................... 29
Silent mode .......................... 31
Voicemail.............................. 31
In-call operations.................. 32
Multiple calls operations....... 34
Text entry ............................. 36
Messages .......................53
Messages menu structure ....53
Creating a new message ......54
Receiving messages.............59
Inbox .....................................60
Archive..................................64
Web mail...............................65
Chat ......................................66
Voicemail ..............................66
Messages settings ................67
Memory status ......................69
Camera ...........................70
Camera menu structure ........70
Picture...................................71
Video.....................................77
VS7_AAA.book
Page ii Wednesday, August 3, 2005
5:10 PM
Contents
Browser ......................... 81
Games.......................... 143
Browser menu structure .......81
Setting up your Browser .......81
Viewing the contents ............82
Browser options....................83
Games menu structure....... 143
Games................................ 144
Download games ............... 146
Settings .............................. 147
Information ......................... 147
Settings ......................... 89
Settings menu structure........89
Phone settings......................90
Display settings ....................96
Sounds & alerts ....................99
Calls....................................101
Connectivity ........................105
Security...............................117
Tools ............................ 120
Tools menu structure..........120
SIM Tool Kit ........................121
Alarms ................................121
Sound recorder...................123
Calculator ...........................124
Calendar ...................... 125
Browsing Calendar .............125
Creating Calendar events...127
Managing Calendar events..129
My Media ..................... 131
My Media menu structure ...131
Pictures...............................132
Sounds ...............................136
Videos.................................139
Games ................................140
Text templates ....................141
Memory status ....................142
ii
Appendix ..................... 148
Accessories........................ 148
CD-ROM ............................ 152
Changing the X-Changeable
CoverTM .......................... 153
Troubleshooting ................. 154
Glossary of terms ............... 157
Specifications ..................... 158
Licensing..................... 160
Index ............................ 164
VS7_AAA.book
Page 1
Wednesday, August 3, 2005
5:10 PM
Introduction
Thank you for purchasing this Panasonic digital cellular phone. This
phone is designed to operate on GSM networks – GSM900,
GSM1800 and GSM1900. It also supports GPRS for packet data
connections. Please ensure the battery is fully charged before use.
We, Panasonic Mobile Communications Development of Europe
Ltd., declare that the EB-VS7 conforms with the essential and other
relevant requirements of the directive 1999/5/EC. A declaration of
conformity to this effect can be found at
http://panasonic.co.jp/pmc/products/en/support/index.html
Safety considerations
The following information should be read and understood as it
provides details, which will enable you to operate your phone in a
manner which is both safe to you and your environment, and
conforms to legal requirements regarding the use of cellular phones.
Power
This equipment should only be charged with approved
charging equipment to ensure optimum performance and
avoid damage to your phone. Other usage will invalidate
any approval given to this apparatus and may be dangerous. Ensure
the voltage rating of the Travel charger is compatible with the area of
use when travelling abroad. A Travel charger (EB-CA001xx*) is
supplied with the Main Kit.
Note* xx identifies the charger region, e.g. CN, EU, UK, AU, US.
Battery
Use of another battery pack than that recommended by the
manufacturer may result in a safety hazard.
If you use a feature which keeps the key backlight on
continuously for a long time, such as a game or browser, battery life
will become extremely short. To maintain longer battery life, set the
Key backlight to off. (See “Key backlight” on page 93.)
Do not use this phone without the battery cover attached.
VS7_AAA.book
Page 2
Wednesday, August 3, 2005
5:10 PM
Introduction
Disposing of the Battery
Do not incinerate or dispose of the battery as ordinary
rubbish. The battery must be disposed of in accordance
with local regulations and may be recycled.
Aircraft
Switch off your cellular phone when in an aircraft. Ensure
that the settings of the alarm functions will not contravene
regulations whereby it may automatically power on when in
an aircraft or medical facility etc. The use of cellular phones in an
aircraft may be dangerous to the operation of the aircraft, disrupt the
cellular network and may be illegal. Failure to observe this
instruction may lead to the suspension or denial of cellular phone
services to the offender, or legal action or both.
Do Not Use
It is advised not to use the equipment at a refuelling point.
Users are reminded to observe restrictions on the use of
radio equipment in fuel depots, chemical plants or where
blasting operations are in progress. Never expose the battery to
extreme temperatures (in excess of 60°C).
Driving
It is imperative that the driver exercises proper control of
the vehicle at all times. Do not hold a phone while you are
driving; find a safe place to stop first. Do not speak into a
handsfree microphone if it will take your mind off the road. Always
acquaint yourself thoroughly with restrictions concerning the use of
cellular phones within the area where you are driving and observe
them at all times.
Electronic Devices
Care must be taken when using the phone in close
proximity to personal medical devices, such as
pacemakers and hearing aids.
VS7_AAA.book
Page 3
Wednesday, August 3, 2005
5:10 PM
Introduction
Heating Equipment
When your handset, the accompanying battery or charging
accessories are wet, do not put those in any type of heating
equipment, such as a microwave oven, a high pressure
container, or a drier or similar. It may cause the battery, handset and/
or charging equipment to leak, heat up, expand, explode and/or
catch fire. Moreover, the product or accessories may emit smoke
and their electrical circuits may become damaged and cause the
products to malfunction. Panasonic is not responsible for any and all
damages, whether direct or indirect, howsoever caused by any
misuse.
Backup Copies & Security
It is recommended that you create a copy or backup, as
appropriate, of any important information and data which
you store in your phone’s memory. In order to avoid
accidental loss of data, please follow all instructions relating to the
care and maintenance of your phone and its battery.
Your phone has the capability of storing and communicating
personal information. It is recommended that you take care to
ensure that any personal or financial information is stored separately
from your phone. You should use security features, such as the SIM
lock to protect information held in your phone. Panasonic accepts no
liability for any and all losses howsoever arising from any loss of
data, including but not limited to direct and indirect losses (to
include, but not limited to consequential loss, anticipated savings,
loss of revenue).
Downloading
Your phone has the capability of downloading and storing
information and data from external sources. It is your
responsibility to ensure that in doing this you are not
infringing any copyright laws or other applicable legislation.
Panasonic accepts no liability for any and all losses howsoever
arising from any loss of data or any such infringement of copyright or
intellectual property rights, including but not limited to direct and
VS7_AAA.book
Page 4
Wednesday, August 3, 2005
5:10 PM
Introduction
indirect losses (to include, but not limited to consequential loss,
anticipated savings, loss or revenues).
Efficient Use
For most efficient use, hold the phone as you would any
normal phone. To avoid deterioration of signal quality or
antenna performance, do not touch or “cup” the antenna
area while the phone is switched on. Unauthorised modifications or
attachments may damage the phone and violate applicable
regulations. The use of an unapproved modification or attachment
may result in the invalidation of your guarantee – this does not affect
your statutory rights.
Camera
You are advised to take appropriate care over the use of
the internal camera. It is your responsibility to ensure that
you have permission to take photographs of people and
objects and that you do not infringe any personal or third party rights
when using the camera. You must comply with any applicable
international or national law or other special restrictions governing
camera use in specific applications and environments. This includes
not using the camera in places where the use of photographic and
video equipment may be prohibited. Panasonic accepts no liability
for any and all losses howsoever arising from any infringement of
copyright or intellectual property rights, including but not limited to
direct and indirect losses. Do not leave the camera facing direct
sunlight, as this may impair its performance.
Other important information
The colour liquid crystal display (LCD) uses high-precision
production technology, and in certain circumstances pixels may
appear brighter or darker. This is due to characteristics of the LCD
and is not a manufacturing defect.
This phone is designed, manufactured and tested to ensure that it
complies with the specifications covering RF exposure guidelines
VS7_AAA.book
Page 5
Wednesday, August 3, 2005
5:10 PM
Introduction
applicable at the time of manufacture, in accordance with EU, USA
FCC and Australian ACA regulations.
This phone should only be used with Panasonic approved
accessories to ensure optimum performance and avoid damage to
your phone. Panasonic is not responsible for damage caused by
using non-Panasonic approved accessories.
This phone must be used in compliance with any applicable
international or national law or any special restrictions governing its
use in specified applications and environments. This includes but is
not limited to use in hospitals, aircraft, whilst driving and any other
restricted uses.
Some of the contents described in this manual are subject to change
without notice.
Care and maintenance
Pressing any of the keys may produce a loud tone. Avoid
holding the phone close to the ear while pressing the keys.
Extreme temperatures may have a temporary effect on the
operation of your phone. This is normal and does not
indicate a fault. The display quality may deteriorate if the
phone is used in environments over 40°C for a long time.
Do not modify or disassemble the equipment. There are
no user serviceable parts inside.
Do not subject the equipment to excessive vibration or
shocks. Do not drop the battery.
VS7_AAA.book
Page 6
Wednesday, August 3, 2005
5:10 PM
Introduction
Avoid contact with liquids or moisture. If the equipment
becomes wet, immediately remove the battery and
charger. Keep the phone dry.
Do not leave the equipment in direct sunlight or a humid,
dusty or hot area. Never throw a battery into a fire. It may
explode.
Keep metallic items that may accidentally touch the
terminals away from the equipment/battery.
Batteries can cause property damage, injury, or burns if
terminals are touched with a conductive material (i.e.
metal jewellery, keys, etc.).
Always charge the battery in a well ventilated area, not in
direct sunlight, between +5°C and +35°C. It is not possible
to recharge the battery if it is outside this temperature
range.
When connecting the phone to an external source, read
the operating instructions of the equipment for the correct
connection and safety precautions. Ensure the phone is
compatible with the product it is being connected to.
When disposing of any packing materials or old
equipment, check with your local authorities for
information on recycling.
VS7_AAA.book
Page 7
Wednesday, August 3, 2005
5:10 PM
Introduction
About this manual
Symbols used in this manual
The following symbols are used in this manual to represent the
limited availability of the function or service.
= Depending on your SIM card.
= Depending on network availability.
= Depending on your network operator. The service may only
be available on a subscription basis.
Graphics
The graphic elements in this manual are for illustrative purposes and
may differ from the actual phone and/or graphic elements displayed
on the phone. Panasonic reserves the right to change the
information in this manual without prior notice.
Keys
Keys in this manual may differ from the actual keys on your phone.
Refer to page 12 for the icons that represent the keys in this manual.
VS7_AAA.book
Page 8
Wednesday, August 3, 2005
5:10 PM
Introduction
How to read this manual
 Fixed dial in Settings menu on page 118.
This function is SIM card dependent. For other symbols, refer to
page 7.
d Menu navigation
Before following the steps, you need to enter Main menu, then move
through the sub menus, described next to the d icon. “>” means
“scroll through the menu and select”.
VS7_AAA.book
Page 9
Wednesday, August 3, 2005
5:10 PM
Introduction
In the example:
From Main menu, press Navigation key (up/down/left/right) to scroll
to Settings and press Navigation key (centre). Press Navigation key
(up/down) to scroll to Security and press Navigation key (centre) or
Left Soft key (Select)*1. Press Navigation key (up/down) to scroll to
Fixed dial and press Navigation key (centre) or Left Soft key
(Select)*1. You can also select Fixed dial by pressing [D].
Now you can continue onto the step 1:
1. Press Navigation key (up/down) to scroll to Enable or Disable,
then press Navigation key (centre) or Left Soft key (Select)*1
2. Enter the PIN2 code (4-8 digits), then press Navigation key
(centre) or Left Soft key (Ok)*1
*1 The word is shown in the lower left hand corner of the display, indicating a
command that the key gives to the phone when you press it.
Note: There are several ways to select items from menu lists. See “Menu
selection method” on page 26.
VS7_AAA.book
Page 10 Wednesday, August 3, 2005
5:10 PM
About Your Phone
Phone overview
Earpiece
Main Display
Macro Mode Switch
One Push
Auto Open
button
Left Soft key
Call key
Asterisk key
Navigation key
Right Soft key
Power/End key
Silent Mode key
Microphone
Charging Indicator
10
VS7_AAA.book
Page 11 Wednesday, August 3, 2005
5:10 PM
About Your Phone
Speaker
Multi Function key
Infrared Port
Side-up key
Side-down key
Camera Lens
Personal Handsfree
Connector/
Charging Connector/
Data Transmission
Connector
Indicator/
Illumination Light
Front display
11
VS7_AAA.book
Page 12 Wednesday, August 3, 2005
5:10 PM
About Your Phone
Key functions
Key name
Function
Key icon*1
Navigation key
Press outside edges to scroll up [1],
down [2], left [3] or right [4] to move
through menus and text. Press centre [0]
to select option, perform Alert mute, or
take a picture or record a video clip in
Camera mode.
[1] [2]
[3] [4]
[0]
Left Soft key
Perform the functions indicated by the
text shown in the lower left-hand corner of
the display.
[5]
Right Soft key
Perform the functions indicated by the
text shown in the lower right-hand corner
of the display.
[6]
Call key
Make or answer a call.
[q]
Power/End key
Press and hold to switch the phone on/off.
End or reject a call. Return to standby
mode.
[Y]
Numeric keys
Enter numbers and characters. Press and
hold [S]-[K] for Speed dialling. Press and
hold [L] to enter the international prefix
(+).
[L] to [K]
Asterisk key
Enter “e”. In text entry mode, press to
change the letter case, or press and hold
to change the input method.
[e]
Silent Mode
key
Enter “r”. Press and hold to switch the
Silent mode on/off. While entering a
phone number, press and hold to enter a
pause (p).
[r]
Side-up key*2
Scroll page up. Increase volume or zoom
level. Perform Alert mute.
[O]
Side-down
key*2
Scroll page down. Decrease volume or
zoom level. Perform Alert mute.
[P]
12
VS7_AAA.book
Page 13 Wednesday, August 3, 2005
5:10 PM
About Your Phone
Key name
Multi Function
key*2
Key icon*1
Function
Take a picture or record a video clip in
Camera mode. Perform Alert mute.
[U]
*1 The key icons given in the table represent the actual keys on the phone.
*2 Located on the right side of the phone.
Quick keys
You can easily access features instead of navigating through the
menus.
Key
Function
In standby mode
Short press
[0]
Open Main menu/Keyguard off
[5]
Open Messages menu
[6]
Open Browser
[1]9[2]9[3]9[4]
[q]
[O]9[P]
Long press
Open the shortcut menu
Open Call log
Increase/decrease the volume
[0]
Keyguard on
[A]
Dial your voice mailbox
[S]-[K]
Speed dial
[r]
Silent mode on/off
[U]
Switch to Picture mode
13
VS7_AAA.book
Page 14 Wednesday, August 3, 2005
5:10 PM
About Your Phone
Key
Function
During a call
Short press
[1]9[4]9[O]
Increase the volume
[2]9[3]9[P]
Decrease the volume
[U]
Start/stop sound recording
[q]
Switch between hold and unhold on
one call or switch between one active
and one held call
In Menu list
[A]-[K]
Short press
14
Select Menu A-K
[e]
Select Menu e
[L]
Select Menu L
[r]
Select Menu r
VS7_AAA.book
Page 15 Wednesday, August 3, 2005
5:10 PM
About Your Phone
Display
Main display (in standby mode)
Signal strength icon
Time
Battery charge
level icon
Date
Wallpaper
Left Soft key
selection area
Right Soft key
selection area
Note: The current operator name is shown on standby display. You can
change the position of the operator name. See “Operator name” on page 96.
Front display (in standby mode)
Signal strength
icon
Battery charge
level icon
External
Wallpaper
15
VS7_AAA.book
Page 16 Wednesday, August 3, 2005
5:10 PM
About Your Phone
Status icons
The status icons are displayed or animated according to the
currently activated functions.
Icon
Meaning
Signal strength; the more bars visible, the stronger the
signal
In roaming area
Battery charge level
Battery is charging
GPRS is available
Silent profile is active
Meeting profile is active
Outdoor profile is active
Car profile is active
SMS message storage area is full
MMS message storage area is full
JavaTM application is suspended
Unread SMS message
Unread MMS message
Unread WAP Push message
Call diverts is on
Infrared is active
Bluetooth is active
16
VS7_AAA.book
Page 17 Wednesday, August 3, 2005
5:10 PM
About Your Phone
Icon
Meaning
Bluetooth headset or handsfree is connected
USB connection is available
New voicemail received
All tones are off
Vibration alert is on
Alarm is set
Non-secure CSD connection
Secure CSD connection
Non-secure GPRS connection
Secure GPRS connection
Keyguard is on
DRM
Your phone has DRM (Digital Right Management) that is used to
control actions such as sending downloaded ringtones, graphics and
sound clips to other people. Files downloaded and indicated by the
icon ( ) can be used with restriction enforced by suppliers. The
restriction includes use of such files for a limited period of time only
or specified number of times.
To check the status of your rights, e.g. expiration date or number of
times it can be used, see Details setting on page 133, 137 and 144.
For further information, contact your service provider.
17
VS7_AAA.book
Page 18 Wednesday, August 3, 2005
5:10 PM
About Your Phone
Indicator/Illumination Light
The Indicator/Illumination Light flashes or beams when the events in
the table below occur.
To specify the illumination colours for the events, see “Illuminations”
on page 92.
Events
When you are receiving a call/
missed calls
When you receive an SMS/MMS
message
When you receive a WAP Push
message
When you are having a conversation
Description
Flash or beam in the selected
colour.
To set a different illumination colour
for respective contacts, see “Storing
a contact in your phone” on page 44.
Flash or beam in the selected
colour.
When the flip is closed
When the battery is charging
When data is being transferred
Schedule notification
Alarm
Flash in the specified colour.
Beam in the specified colour. See
“Creating Calendar events” on
page 127 or “Setting the alarm” on
page 121.
Note: If the Indicator/Illumination Light is set to on for battery charging and
the phone is switched on, the Indicator/Illumination Light illuminates during
charging. If the phone is switched off, the Indicator/Illumination Light will not
illuminate.
18
VS7_AAA.book
Page 19 Wednesday, August 3, 2005
5:10 PM
Getting Started
Installing the SIM card and the
battery
The SIM (Subscriber Identity Module) card and the battery must be
installed before using your phone.
Before handling the SIM card and the battery, ensure that the phone
is switched off and the charger is disconnected from the phone.
Inserting/removing the SIM card
See “Inserting/removing the battery” on page 20 to remove the
battery cover and the battery.
Inserting the SIM card
Position the SIM card as shown, with
gold contacts facing down and the
notched corner turned to the right.
Carefully slide the SIM card into the
SIM card pocket until the card is all the
way seated.
Removing the SIM card
Place a finger on the bottom edge of
the SIM card and gently slide it out.
19
VS7_AAA.book
Page 20 Wednesday, August 3, 2005
Getting Started
Inserting/removing the battery
Inserting the battery
1. Insert the small tabs at the top of the
battery into the notch at the top of the
battery compartment. Ensure the 3 gold
contacts align with the 3 gold pins in
the phone.
2. Replace the cover on the phone. Make
sure the cover clicks into place.
Removing the battery
1. Place your finger on the small bar at
the top of the cover. Slide the cover
slightly toward the bottom of the phone,
then lift the cover off the phone.
2. Place your finger on the tab at the base
of the battery. Lift the battery off the
compartment.
20
5:10 PM
VS7_AAA.book
Page 21 Wednesday, August 3, 2005
5:10 PM
Getting Started
Charging the battery
Your phone can be charged either when it is switched on or off. You
can use your phone even while it is charging.
Ensure that the battery is inserted into the phone before charging.
1. Open and hold the connector
cover.
Connect the charger to
Charging Connector, then
connect the charger to the
mains power supply.
2. When charging is complete,
disconnect the charger from
the outlet before removing the
plug from the phone. Then
hold the connector cover and
press and hold the release
buttons on both sides of the
connector’s end and pull
gently to disconnect the
charger from the phone.
After you have removed the Charging Connector, replace the
connector cover over the socket.
Note: DO NOT force the connector as this may damage the phone and/or
the charger.
If the battery has been deeply discharged, it may take several minutes
before the Battery charge level indicator is displayed.
21
VS7_AAA.book
Page 22 Wednesday, August 3, 2005
5:10 PM
Getting Started
Battery charge level indicator
While charging
Charging complete
Charging Indicator goes out when charging is completed.
Low battery warning
When the battery power is low, a “Battery low” message is
displayed and a warning tone sounds. The phone automatically
switches off after the tone. Fully recharge the battery. If you receive
the low battery warning during a conversation, charge your phone to
continue with the conversation.
22
VS7_AAA.book
Page 23 Wednesday, August 3, 2005
5:10 PM
Getting Started
Opening/closing the phone
You can open your phone by
pressing One Push Auto Open
button.
One Push
Auto Open
button
Flip setting
When Active flip setting is set to On (see page 103), you can
answer a call by opening the phone and end a call by closing the
phone.
When One push SMS setting is set to On (see page 67), new SMS
messages can be displayed by opening the flip.
Switching the phone on/off
1. Press and hold [Y] for several seconds to switch the phone
on
A greeting may be displayed and the phone enters standby mode.
2. Press and hold [Y] for several seconds to switch the phone
off
Note: If your SIM card is PIN protected, your PIN code will be requested.
Enter the PIN code and [0]9[5] (Ok). See “Security” on page 117.
DO NOT switch off the phone while resetting/downloading/deleting a file or
running/terminating a JavaTM application.
23
VS7_AAA.book
Page 24 Wednesday, August 3, 2005
5:10 PM
Menu Navigation
Main menu structure
Games
My Media
Games ................... 144
Download*1 ............ 146
Settings .................. 147
Information ............. 147
Pictures ................. 132
Sounds .................. 136
Videos.................... 139
Games ................... 140
Text templates ....... 141
Memory status ....... 142
Camera
Messages
Browser
Picture...................... 71
Video ........................ 77
Create new .............. 54
Inbox........................ 60
Archive .................... 64
Web mail*1............... 65
Chat*1 ...................... 66
Voicemail ................. 66
Messages settings... 67
Memory status ......... 69
PANASONIC BOX ... 81
Tools
Contacts
Settings
Contacts list ............. 42
Add contact.............. 44
Call log .................... 47
Speed Dial list.......... 48
View groups............. 49
Advanced ................ 49
Service numbers*1*2 52
Phone settings ......... 90
Display settings........ 96
Sounds & alerts........ 99
Calls ....................... 101
Connectivity ........... 105
Security .................. 117
SIM tool kit*2 .......... 121
Alarms .................... 121
Sound recorder ...... 123
Calculator ............... 124
Calendar ...........125
*1
*2
24
VS7_AAA.book
Page 25 Wednesday, August 3, 2005
5:10 PM
Menu Navigation
Displaying the menu
The menu system allows you to access functions which do not have
their own dedicated buttons on the keypad.
In standby mode:
1. [0]
Main menu appears with 9 menu options. (See
“Main menu structure” on page 24.)
2. [1929394] to scroll to the required
menu 7 [0]9[5] (Select)
To go back to Main menu:
1. [6] (Back) repeatedly until Main menu
screen appears
Shortcut: To jump to and open one of the 9 application items, simply press
the Numeric key corresponding to the required item’s location. The
numbering system is:
25
VS7_AAA.book
Page 26 Wednesday, August 3, 2005
5:10 PM
Menu Navigation
Navigating the applications
Current settings
When you highlight an item in the menu list, the current setting of the
item is displayed in the bar just above the menu list.

In the case shown to the right, the current
setting of Warning tone is “Off”.
Menu selection method
There are several ways to select items: by using center Navigation
key or Left Soft key, or by entering the required number, e or r
given to the item.

To select Warning tone in the display shown above:
• [192] to scroll to Warning tone 7 [0]
• [192] to scroll to Warning tone 7 [5] (Select)
• Press the menu number [G]
Keys corresponding to the menu numbers
•
•
•
•
[A]-[K]: Menu A-K
[e]: Menu e
[L]: Menu L
[r]: Menu r
Note: Direct access keys to the menus with no menu numbers/symbols are
not available.
26
VS7_AAA.book
Page 27 Wednesday, August 3, 2005
5:10 PM
Basic Operations
Note: There are several ways to select items from menu lists. See “Menu
selection method” on page 26.
Making calls
To make a call, your phone must be within the range of a network
with adequate signal strength.
Standard dialling
In standby mode:
1. Enter the area code and phone number 7 [q]9[0]
2. When the other party answers, talk into Microphone
3. [Y]9[6] (End) to hang up
The duration of the call is displayed.
Note: To erase a digit: [6] (Clear)
To increase the earpiece volume: [1]9[4]9[O]
To decrease the earpiece volume: [2]9[3]9[P]
If Active flip is set to On (see page 103), you can answer a call by opening
the phone and end a call by closing the phone.
Auto redial
Your phone will automatically redial the number up to 10 times under
certain conditions, such as no answer, destination number is busy,
network busy, or some connection errors.
When your call is rejected:
1. “Auto redial?” 7 [5] (Yes) to start Auto redial
2. To stop Auto redial while redialling, [Y]9[6] (Cancel)
27
VS7_AAA.book
Page 28 Wednesday, August 3, 2005
5:10 PM
Basic Operations
Contacts dialling
You can make calls using the numbers in Contacts.
d Main menu > Contacts > Contacts list
1. [192] to scroll to the required contact
OR
Enter letters to find a contact beginning
with the specific letters
2. [q]
3. If the card has several phone numbers
stored, [192] to scroll to the required
number 7 [0]9[5] (Call)
Recent call dialling
You can make calls using the numbers in Call log.
In standby mode:
1. [q]
2. [394] to switch to Dialled numbers, Answered calls or
Missed calls screen
3. [192] to scroll to the required number 7 [q]
International dialling
The international prefix (+) and the destination country/region code
should be entered, followed by the area code and phone number.
1. Press and hold [L] until “+” is displayed
2. Enter the country/region code
3. Enter the area code and phone number 7 [q]
Note: Many countries/regions include an initial “0” in the area code. This
should, in most cases, be omitted when dialling international numbers. For
further help, contact your service provider.
28
VS7_AAA.book
Page 29 Wednesday, August 3, 2005
5:10 PM
Basic Operations
Emergency call
To make an emergency call, your phone must be within the range of
a network.
When SIM card is inserted:
1. Enter the local emergency number 7 [q]9[0]
Note: Most countries support the international emergency number 112. If
you find the number does not work on your phone, contact your service
provider.
When SIM card is not inserted:
1. [5] (Options) 7 Select SOS
Answering calls
When there is an incoming call, the phone rings and/or vibrates
(depending on your phone setting). (See “Sounds & alerts” on
page 99.)
When the phone is ringing and/or vibrating:
1. [q]9[5] (Accept)
Note: If Any key answer is set to On (see page 102), you can answer a
call by pressing any key except [Y], [0], [6] (Cancel), [U], [O] and [P].
If Active flip is set to On (see page 103), you can answer a call by opening
the phone and end a call by closing the phone.
Rejecting calls
When the phone is ringing and/or vibrating:
1. [Y]9[6] (Cancel)
29
VS7_AAA.book
Page 30 Wednesday, August 3, 2005
5:10 PM
Basic Operations
Missed call notification
If you cannot answer a call, Missed call notification appears on the
standby screen.
To view the Missed call list:
1. [0]9[5] (View)
2. To call back, [192] to scroll to the required log 7 [q]
Alert mute
You can turn the ringing tone and/or vibration off before answering a
call.
When the phone is ringing and/or vibrating:
1. When the phone is closed: [U]9[O]9[P]
When the phone is open: [0]
2. [q] to answer the call
Answering a second call
When on an active call, you may receive another call.
To enable this service, Call waiting must be active. (See “Call
waiting” on page 102.)
If you hear an alert tone during a call:
1. [q]9[5] (Accept)
The first call is placed on hold.
2. [q] to switch between the two calls if required
To reject another call:
1. [6] (End)
To end the active call and answer the incoming call:
1. [Y] to end the active call
2. [q] to answer the call
30
VS7_AAA.book
Page 31 Wednesday, August 3, 2005
5:10 PM
Basic Operations
Auto answer
When you use the optional Personal Handsfree earpiece, you can
answer a call automatically. To enable this service, Auto answer
must be on. (See “Auto answer” on page 103.)
Silent mode
To use your phone in a quiet situation, you can activate the Silent
mode. You can personalise the Silent mode setting. (See “Profiles”
on page 90.)
In standby mode:
1. Press and hold [r] to activate/deactivate the Silent mode
Voicemail
Voicemail is a network service which allows callers, who could not
reach you, to leave voice messages. You may need to subscribe to
this service through your service provider. For further details, see
“Voicemail” on page 66.
Retrieving stored voice messages
When a new voice message is stored, an alert sounds and (
appears on the display and you receive an SMS notification.
1. Press and hold [A] to call your voice mailbox
If the number is not valid, contact your service provider.
2. Follow the recorded instructions
3. [Y] when finished
31
VS7_AAA.book
Page 32 Wednesday, August 3, 2005
5:10 PM
Basic Operations
In-call operations
In-call options (while connected to an active
call)
When on a call, the following options are available.
1. [5] (Options) 7 Select the required option
Hold call/Resume
Put or resume a call on hold.
From contacts
Access the Contacts list.
Create SMS
Create a new SMS message.
Inbox (SMS)
Access Inbox (SMS).
Calendar
Access Calendar.
Speaker mode/
Handheld mode/
Bluetooth mode
Switch to Speaker, Handheld or Bluetooth talking
mode.
Record
Record the conversation. The sound clip is saved
to My Media.
Hold
You can put a call on hold.
During a call:
1. [q] to switch between Hold call and Resume
OR
[5] (Options) 7 Select Hold call or Resume
32
VS7_AAA.book
Page 33 Wednesday, August 3, 2005
5:10 PM
Basic Operations
Handsfree talking
You can have a conversation without holding the phone to your ear.
Swapping between Speaker and Handheld mode
1. [5] (Options) 7 Select Speaker mode or Handheld mode
Volume control
You can adjust the volume of the phone earpiece, speaker, headset
or Bluetooth audio device if attached.
To increase the volume:
1. [1]9[4]9[O]
To decrease the volume:
1. [2]9[3]9[P]
DTMF
DTMF (Dual Tone Multi Frequency) can be sent during a
conversation. These are often used to access voicemail, paging and
computerised home banking. For example, you may need to enter a
number to remotely access voicemail messages. A phone number
may be stored in the Contacts card together with a DTMF sequence,
allowing the number to be dialled upon recall and the DTMF
sequence to be sent automatically.
To send DTMF during a call:
1. Enter digits [L]-[K], [e] or [r]
Pause dial
Using pauses allows you to send DTMF automatically.
1. Enter the phone number
2. Press and hold [r] until a “p” is displayed
3. Enter the DTMF digits after the pause, e.g. enter the number to
access voicemail messages
4. [q]9[0]
When the call is connected, the DTMF sequence is sent after 3 seconds.
33
VS7_AAA.book
Page 34 Wednesday, August 3, 2005
5:10 PM
Basic Operations
Making a second call
You can make another call while on a call.
During a call:
1. Enter the second phone number or select a phone number
from the Contacts list
To access Contacts list, see “In-call operations” on page 32.
2. [q]
The first call is put on hold.
3. [q] to switch between the two calls if required
Multiple calls operations
In-call options (while on multiple calls)
When on more than one call, the following options are available.
1. [5] (Options) 7 Select the required option
Swap
Switch between one active and one held call.
Merge
Enable multi-party conversation when two calls
are connected (one active, one on hold). See
“Conference” on page 35.
From contacts
Access the Contacts list.
Create SMS
Create a new SMS message.
Inbox (SMS)
Access Inbox (SMS).
Calendar
Access Calendar.
Speaker mode/
Handheld mode/
Bluetooth mode
Switch to Speaker, Handheld or Bluetooth talking
mode.
Record
Record the conversation. The sound clip is saved
to My Media.
34
VS7_AAA.book
Page 35 Wednesday, August 3, 2005
5:10 PM
Basic Operations
Conference
You can have a conversation with up to 5 different parties at the
same time.
During a call (one active call and one call on hold):
1. [5] (Options) 7 Select Merge
The 2 calls are joined into a Conference call.
To add new participants:
2. Call the next person or answer an incoming call
3. [5] (Options) 7 Select Merge
To end the Conference call:
4. [Y]
To split the caller from the Conference call and talk privately:
During a Conference call:
1. [5] (Options) 7 Select Conference call
2. [192] to scroll to the required caller you wish to talk to
3. [5] (Options) 7 Select Split
The remaining callers can continue with the Conference call.
4. To end the private call and rejoin the Conference call, [5]
(Options) 7 Select Merge
35
VS7_AAA.book
Page 36 Wednesday, August 3, 2005
5:10 PM
Basic Operations
Text entry
Input method
Your phone provides three text input methods to enter characters.
T9®
A predictive text entry system. You can enter a
word with fewer key presses.
Multi-tap
A traditional way to type in a letter. Press a key
several times until the required letter appears.
Numeric
You can enter numbers (0-9), e, r and +.
An icon on the upper left of the screen shows the current input
method and letter case.
Input method
T9®
Multi-tap
Numeric
36
Icon
Letter case
T9y
Automatic
T9u
Upper case
T9
Lower case
Abc
Automatic
ABC
Upper case
abc
Lower case
123
VS7_AAA.book
Page 37 Wednesday, August 3, 2005
5:10 PM
Basic Operations
Changing the input method
Press and hold [e] to cycle through the input methods as follows.
T9 (T9y) 7 Multi-tap (Abc) 7 Numeric (123)
Changing the letter case
Press [e] repeatedly until the icon for the required letter case mode
appears.
Auto capital change
When the letter case is set to Automatic (T9y and Abc), the first
character is entered as upper case and subsequent letters as lower
case.
When one of the following characters [. (Period) ! ? ] is entered, the
next character is entered as upper case.
37
VS7_AAA.book
Page 38 Wednesday, August 3, 2005
5:10 PM
Basic Operations
T9® text input method
The T9® text input method enables you to enter text faster and
easier. You only need to press a key once for any letter you require
on that key. The program searches its built-in dictionary to predict
the word that most closely matches your key presses.
1. In text entry screen, press a key once for any letter you require
on that key
2. Continue pressing other keys until the end of a word is reached
3. Select the required word
OR
If the required word is not in the dictionary, “?” is displayed after
the word.
[5] (Spell) 7 Enter the correct word 7 [0]9[5] (Add)
The word is added to the internal dictionary automatically.
For example, to enter “Hello!”, press keys as follows.
Key
Display
[F]
[D]
[G]
[G]
[H]
[A]
[2] x 4
He
Gel
Hell
Hello
Hello.
Hello!
My dictionary
Words that you enter in My dictionary are added to the internal
dictionary so that they are suggested next time.
To add words to My dictionary:
1. In text entry screen, [5] (Options) 7 Select My dictionary
2. Enter a word 7 [0]9[5] (Add)
38
VS7_AAA.book
Page 39 Wednesday, August 3, 2005
5:10 PM
Basic Operations
Editing text
Inserting/deleting text
Move the cursor by pressing [1929394] to the position you want
to insert or delete a letter. Press [6] (Clear) to delete a character.
Press and hold [6] (Clear) to delete all the characters.
Copying/cutting/pasting text
1. [5] (Options) 7 Select Copy or Cut
2. [1929394] to move to the text you wish to copy or cut
3. [0]9[5] (Start) 7 [1929394] to highlight the text 7
[0]9[5] (Stop)
4. [1929394] to move to a new required location
5. [5] (Options) 7 Select Paste
Options
When entering text, the following options may be available by
pressing [5] (Options).
Use contacts*1
Access Contacts menu to use Contacts data.
Copy/Cut/Paste
See “Copying/cutting/pasting text” on page 39.
Add symbol
Show the Symbol list from which you can select
any symbol available on your phone.
Input method
Select the input method.
T9 on/off*1
Turn On or Off the predictive dictionary.
Input language*1
Select a language you wish to write in.
My dictionary*2
Add words to the internal dictionary.
Exit
Exit the text edit mode.
*1 Depends on each application.
*2 Not available in Chinese T9 mode.
39
VS7_AAA.book
Page 40 Wednesday, August 3, 2005
5:10 PM
Basic Operations
The following table shows characters available on your phone.
The characters vary depending on the Input language setting (see
page 39).
Input method (Input language: English)
Key
T9® (T9y,
T9u or T9)
Multi-tap (Abc, ABC or abc)
Numeric
(123)
[L]
Space
(Press and
hold) +
[A]
.,-?!’@:;/1
.,?1!"-:;@/e()#+_=[
]{}'¡¿&%\^~|<>f¢£$
¥ ¤ § ` (Space) * (Linefeed)
[S]
A B C 2 (a b c 2)
ABC2ΓÁÄÅÂÃÆÇ
(a b c 2 α β γ á ä å æ à â ã)
[D]
D E F 3 (d e f 3)
DEF3∆ÉÊ
(d e f 3 δ ε ζ é è ê)
[F]
G H I 4 (g h i 4)
G H I 4 Θ Í (g h i 4 η θ ι ì í)
[G]
J K L 5 (j k l 5)
J K L 5 Λ (j k l 5 κ λ µ)
[H]
M N O 6 (m n o 6)
MNO6ΞÑÓgÖØÔÕ
(m n o 6 ν ξ ó h ñ ö ø ò ô õ)
[I]
P Q R S 7 (p q r s 7)
PQRS7ΠΣ
(p q r s 7 π ρ l σ ß)
[J]
T U V 8 (t u v 8)
TUV8ΦÚjÜ
(t u v 8 τ υ φ ú k ü ù)
[K]
W X Y Z 9 (w x y z 9)
[e]
[r]
W X Y Z 9 Ψ Ω (w x y z 9 χ ψ ω)
Letter case change
(Press and hold) Input method change
.,?!"-:;@/e()#+_=[]{}'¡¿&%\^~|<>f
¢ £ $ ¥ ¤ § ` (Space) * (Linefeed)
(Press and hold) Linefeed
Shortcut: To enter numbers while in T9 or Multi-tap method, press and
hold the required numeric key [L]-[K].
40
VS7_AAA.book
Page 41 Wednesday, August 3, 2005
5:10 PM
Contacts
Contacts menu structure
Contacts list ..................... 42
Add contact ...................... 44
Phone..................................... 44
SIM......................................... 46
Call log.............................. 47
Dialled numbers ..................... 47
Answered calls ....................... 47
Missed calls............................ 47
Speed Dial list .................. 48
Advanced ..........................49
Synchronisation ...................... 49
My number.............................. 50
Display by ............................... 51
Memory status ........................ 51
Copy all from SIM ................... 51
Copy all to SIM ....................... 51
Delete all................................. 52
Service numbers*1 ...........52
*1
View groups ..................... 49
Note: There are several ways to select items from menu lists. See “Menu
selection method” on page 26.
41
VS7_AAA.book
Page 42 Wednesday, August 3, 2005
5:10 PM
Contacts
Viewing the Contacts list
You can search for a phone number in the Contacts list. All the
numbers stored in the phone and SIM card are displayed.
Searching for a contact
d Main menu > Contacts > Contacts list
1. [192] to scroll to the required contact
OR
Enter letters to find a contact beginning
with the specific letters
2. To view the Contacts card, [0]
Options
In the Contacts list, the following options are available by pressing
[5] (Options).
View
View the selected Contacts card.
Call
Call the selected contact.
Create message
Create an SMS or MMS, and send it to the
selected contact. See “Creating a new message”
on page 54.
Edit
Edit the selected contact. See “Editing a Contacts
card” on page 46.
Search
Search a contact by entering characters.
Add contact
Add a new contact. See “Adding contacts” on
page 44.
Delete
Delete the selected contact.
42
VS7_AAA.book
Page 43 Wednesday, August 3, 2005
5:10 PM
Contacts
Speed dial
Assign the selected contact to a Speed dial. See
“Assigning speed dial keys” on page 48.
Copy to phone/SIM
Copy the selected contact to the phone or the SIM
card.
Send via
Send the selected contact to another device via
infrared or Bluetooth. See “Infrared” on page 105
or “Bluetooth® wireless technology” on page 107.
Making a call from Contacts
d Main menu > Contacts > Contacts list
1. [192] to scroll to the required contact
OR
Enter letters to find a contact beginning with the specific letters
2. [q]
3. If the card has several phone numbers stored, [192] to scroll
to the required number 7 [0]9[5] (Call)
43
VS7_AAA.book
Page 44 Wednesday, August 3, 2005
5:10 PM
Contacts
Adding contacts
Storing a contact in your phone
In the phone, you can store detailed information for each contact.
The entries are retained even if you damage your SIM card.
d Main menu > Contacts > Add contact > Phone
1. [192] to scroll to the required field 7 [0]
2. Enter information 7 [0]
To enter characters, see “Text entry” on page 36.
3. When entries are completed, [5] (Save)
First name*1
Enter the first name.
name*1
Enter the last name.
Last
Mobile
number*1
Home number*1
Enter the phone numbers.
Work number*1
Mobile email*1
Personal
email*1
Enter the e-mail addresses.
Work email*1
44
Birthday
Enter the contact’s birthday.
Postal address
Enter Additional info, No./street, Postal
code, City, State and Country.
Note
Enter notes.
VS7_AAA.book
Page 45 Wednesday, August 3, 2005
5:10 PM
Contacts
Ringtone
Select the required ringtone from
 or My Media. To download a
ringtone, select Download*2.
Message alert
Select the required Message alert from
 or My Media. To download a
Message alert, select Download*2.
Illuminations
Select  or the required
illumination colour.
Picture
Select the required picture.
Group
Select the required group.
*1 The contact entry can be saved when at least one of the items is filled.
*2
Note: If a picture in My Media is attached to a Contacts card, it appears on
the screen when the contact calls you. When the picture is set to be attached
to a Contacts card, the phone saves the picture resized for the Contacts card
if the picture is larger than the display size.
For downloading contents, visit http://box.panasonic.com/
45
VS7_AAA.book
Page 46 Wednesday, August 3, 2005
5:10 PM
Contacts
Storing a contact in your SIM card
You can store some information for each contact in your SIM card.
d Main menu > Contacts > Add contact > SIM
1. [192] to scroll to the required field 7 [0]
2. Enter information 7 [0]
Name
Enter the name.
Tel number
Enter the phone number.
3. [5] (Save)
Note: The length of name and number, and the total amount of data are
SIM dependent.
Storing a contact from Call log
See “Saving a phone number from Call log” on page 47.
Editing a Contacts card
d Main menu > Contacts > Contacts list
1. Highlight the required Contacts card (See “Searching for a
contact” on page 42.)
2. [5] (Options) 7 Select Edit
3. Edit the required entry 7 [5] (Save)
46
VS7_AAA.book
Page 47 Wednesday, August 3, 2005
5:10 PM
Contacts
Call log
Recently dialled phone numbers, answered calls and missed calls
are stored in Call log. The numbers in the Call log list can be used to
call, send a message or add to Contacts.
Viewing/Dialling from Call log
d Main menu > Contacts > Call log
1. [394] to move to Dialled numbers, Answered calls or
Missed calls
2. [192] to scroll to the required log 7 [0]
3. [0] to call
Shortcut: You can directly view the Dialled numbers list by pressing [q]
in standby mode.
Saving a phone number from Call log
d Main menu > Contacts > Call log
1. [394] to move to Dialled numbers, Answered calls or
Missed calls
2. [192] to scroll to the required phone number
3. [5] (Options) 7 Select Add to contacts
4. Select New or Add
5. If New is selected: Enter other information
If Add is selected: Highlight the required contact 7 [5]
(Select) 7 If there is no empty field, “Would you like to
replace?” 7 [0]9[5] (Yes) 7 Select the number you want to
replace in Phone Contacts
6. [5] (Save)
47
VS7_AAA.book
Page 48 Wednesday, August 3, 2005
5:10 PM
Contacts
Options
In each Call log list, the following options are available by pressing
[5] (Options).
Call
Call the selected number.
Create message
Create an SMS or MMS message to the selected
number.
Add to contacts
Store the selected number to Contacts. See
“Saving a phone number from Call log” on
page 47.
Delete
Delete the selected number.
Delete all
Delete all the logs in the list.
Speed dial
You can quickly dial phone numbers by pressing keys 2-9.
Assigning speed dial keys
d Main menu > Contacts > Speed Dial list
1. [192] to scroll to the required key 7 [0]
2. Enter phone number 7 [0]
To assign a speed dial key to a contact:
d Main menu > Contacts > Speed Dial list
1. [192] to scroll to the required key 7 [5] (LookUp)
2. Highlight the required contact 7 [5] (Select)
3. If the card has several phone numbers stored, [192] to scroll
to the required number 7 [0]9[5] (Select)
Using the speed dial keys
In standby mode:
1. Press and hold a speed dial key ([S]-[K]) 7 [5] (Call)
48
VS7_AAA.book
Page 49 Wednesday, August 3, 2005
5:10 PM
Contacts
Groups
You can categorise the Contacts list stored in your phone into
20 groups.
Viewing group members
d Main menu > Contacts > View groups
1. Select the required group
The contacts in the selected group are displayed.
Renaming a group
d Main menu > Contacts > View groups
1. [192] to scroll to the required group 7 [5] (Rename)
2. Enter a new group name 7 [0]
Advanced
Synchronisation
You can synchronise your Contacts list with your network server. You
can just send changes or send all your records to the network
server. For further details, see “Synchronisation” on page 112.
To send only changes to the network server:
d Main menu > Contacts > Advanced > Synchronisation >
Modified contacts
The phone confirms completion.
To send all your records to the network server:
d Main menu > Contacts > Advanced > Synchronisation > All
contacts
The phone confirms completion.
49
VS7_AAA.book
Page 50 Wednesday, August 3, 2005
5:10 PM
Contacts
My number
You can store your own numbers in the phone and SIM card.
Storing numbers in Mobile profile
d Main menu > Contacts > Advanced > My number > Mobile
profile
1. [0]9[5] (Create)
2. Repeat steps 1-3 in “Storing a contact in your phone” on
page 44
Storing numbers in SIM profile
d Main menu > Contacts > Advanced > My number > SIM
profile
1. When the profile is empty: [0]9[5] (Create)
When the profile has the stored number(s): [5] (Options) 7
Select Create
2. Repeat steps 1-3 in “Storing a contact in your SIM card” on
page 46
Options
When viewing My number, the following options are available by
pressing [5] (Options).
Edit
Create*
Edit the profile.
Create a new profile.
Delete
Delete the profile.
Send via
Send the profile via infrared or Bluetooth. See
“Infrared” on page 105 or “Bluetooth® wireless
technology” on page 107.
*1 Available only for SIM profile.
50

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 60
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:8b8ba29d-407e-491e-9837-32225cb4d252
Modify Date                     : 2005:08:10 11:55:40+01:00
Create Date                     : 2005:08:10 11:54:51+01:00
Metadata Date                   : 2005:08:10 11:55:40+01:00
Document ID                     : uuid:d77a4163-030e-41b6-b227-9f7fdf1154fc
Format                          : application/pdf
Title                           : VS7_AAA.book
Creator                         : PScript5.dll Version 5.2.2
Author                          : shinsei
Producer                        : Acrobat Distiller 6.0.1 (Windows)

EXIF Metadata provided by EXIF.tools