Panasonic Mobile Communications 113059A Single Mode UMTS Phone with Bluetooth User Manual P 01F MANUAL E 130905

Panasonic Mobile Communications Development of Europe Ltd Single Mode UMTS Phone with Bluetooth P 01F MANUAL E 130905

UserManual.wiki >

Panasonic Mobile Communications >

113059A User Manual

User Manual

P-01FINSTRUCTION MANUAL ’13.10

Thank you for selecting the “P-01F”.Read this manual before use to correctly operate your P-01F.For Using This Manual󱛡Note that “P-01F” is referred to as “FOMA terminal” in this manual.󱛡Most operating procedures and displays in this manual are shown with the default settings of the “White” handset. Further, displays and illustrations shown in this manual are for reference. The actual ones might differ. 󱛡P-01F Handset (With Warranty) 󱛡Battery Pack P23 󱛡Instruction Manual (Japanese version) 󱛡See page 73 for optional items that support this FOMA terminal.About manual of P-01FThe operating procedures for the P-01F are also published as in “使いかたガイド (Guide)” on-screen manual installed onto your FOMA terminal, and “Instruction Manual (Detailed Version)” as a PDF. (In Japanese only)◆“Instruction Manual” (this manual)◆Description of the displayed content and operating procedures for basic functions◆“使いかたガイド (Guide)” (installed onto your FOMA terminal)◆Description of the outline and operations of frequently used functions From the P-01F m▶便利ツール (Tool)▶使いかたガイド (Guide)※ This function is available in Japanese mode only.◆“Instruction Manual (Detailed Version)” (PDF)◆From a PC, download detailed information about all the functions and the operating procedures. (In Japanese only)(http://www.nttdocomo.co.jp/support/trouble/manual/download/index.html)※ Note that the URL and published contents may be modiﬁed without notice. Basic Package 󱛡Desktop Holder P54 󱛡Back Cover P61

For Loss, Theft, Malfunction, and Inquiries while Overseas (24-hour Reception) ■From DOCOMO mobile phonesInternational call access code for the country you stay -81-3-6832-6600* (toll free)* You are charged a call fee to Japan when calling from a land-line phone, etc.※ If you use P-01F, you should dial the number +81-3-6832-6600 (to enter ‘+’, press and hold the ‘0’ key for at least one second). ■From land-line phones ＜Universal number＞Universal number international preﬁx -8000120-0151** You might be charged a domestic call fee according to the call rate for the country you stay.※ For international call access codes for major countries and universal number international preﬁx, refer to the DOCOMO International Services website. ●If you lose your FOMA terminal or have it stolen, immediately take the steps necessary for suspending the use of the FOMA terminal. ●If the FOMA terminal you purchased is damaged, bring your FOMA terminal to a repair counter speciﬁed by DOCOMO after returning to Japan.

General Inquiries<docomo Information Center> Repairs 0120-005-250 (toll free)* Service available in English, Portuguese, Chinese, Spanish.* Unavailable from part of IP phones.(Business hours: 9:00 a.m. to 8:00 p.m.) ■From DOCOMO mobile phones(In Japanese only) (No preﬁx) 113 (toll free)* Unavailable from land-line phones, etc. ■From land-line phones(In Japanese only)0120-800-000 (toll free)* Unavailable from part of IP phones. ■From DOCOMO mobile phones(In Japanese only) (No preﬁx) 151 (toll free)* Unavailable from land-line phones, etc. ■From land-line phones(In Japanese only)0120-800-000 (toll free)* Unavailable from part of IP phones.(Business hours: 24 hours (open all year round))(Business hours: 9:00 a.m. to 8:00 p.m. (open all year round)) ●Please conﬁrm the phone number before you dial. ●For Applications or Repairs and After-Sales Service, please contact the above-mentioned information center or the docomo Shop etc. near you on the NTT DOCOMO website or the i-mode site.NTT DOCOMO website (http://www.nttdocomo.co.jp/english/)i-mode site ｉMenu ▶ お客様サポート (User support) ▶ ドコモショップ (docomo Shop) (In Japanese only)Don’t forget your mobile phone ... or your manners!When using your mobile phone in a public place, don’t forget to show common courtesy and consideration for others around you.Sales: Manufacturer: October ’13 (1st Edition)PXQP1011ZA/J1F0913-0

1※It is prohibited to copy all or part of this manual without permission. ※The instructions contained in this manual may be changed without notice.Contents IntroductionFOMA Terminal ······························ 2Part Names and Functions ············ 3Precautions ···································· 5Handling Precautions ·················· 12Waterproof/Dust-proof Performance ··· 16Basic OperationBefore Using ················································· 20Screen Explanation ······································ 23Character Entry ············································ 30Sound/Screen Setting ·································· 31Lock/Security ················································ 34ConnectCall Telephone ·············································· 38Mail ································································ 44Phonebook ··················································· 47Searchi-mode/Full Browser ····································· 48 i-channel ······················································· 50EnjoyCamera ·························································· 511Seg ······························································ 53Music ····························································· 55i-αppli/i-Widget ············································· 57i-motion ························································· 58More Convenienti-concier ························································ 59Convenient Tools ·········································· 59Data Management ········································ 63OthersSupport ························································· 67Appendix ······················································· 74Index ····························································· 87

2IntroductionFOMA Terminal 󱛡This FOMA terminal supports W-CDMA system. 󱛡Because the FOMA terminal uses radio waves, you cannot use it in places where the radio waves do not reach, where they are weak even outdoors, such as inside tunnels, basements, or buildings, or out-of-service area. You might not be able to operate the FOMA terminal even when you are in a place with a ﬁne view such as in a high-rise building or apartment. Note that you may experience interruption of calls even if the three antennas respond to a strong radio wave, and you remain without moving to use the FOMA terminal. 󱛡Since the FOMA terminal uses radio waves as the medium of telecommunication, calls may be tapped by a third party. However, the W-CDMA system automatically supports tapping prevention, so your conversation will be incomprehensible to the third party, because it is recognized as mere noise. 󱛡The FOMA terminals change your voice into digital signals and send them to the other party. In places where the radio waves are weak, the digital signals may not be converted correctly, and in such a case, the voice may sound different from the actual one. 󱛡The user hereby agrees that the user shall be solely responsible for the result of the use of SSL/TLS. Neither DOCOMO nor the certiﬁers as listed herein make any representation and warranty as for the security in the use of SSL/TLS. In the event that the user shall sustain damage or loss due to the use of SSL/TLS, neither DOCOMO nor the certiﬁers shall be responsible for any such damage or loss.Certiﬁers: VeriSign Japan K.K., GlobalSign K.K., Cybertrust Japan Co., Ltd., EMC Japan K.K., SECOM Trust Systems Co., Ltd., Comodo CA Ltd., Entrust, Inc., and Go Daddy, Inc. 󱛡This FOMA terminal supports FOMA Plus-Area and FOMA High-Speed Area. 󱛡Although the display was created using highly advanced technology, it is possible that some pixels might not light, or that some pixels light continuously. Please be aware that this is a characteristic of liquid crystal displays, and does not indicate a malfunction. 󱛡You are advised that you make separate notes of information (such as Phonebook entries, schedule events, memos, record messages, voice memos) stored in the FOMA terminal and keep them in a safe place. Note that we cannot be held responsible for the unlikely event of loss of the stored content due to a malfunction, repair, change of your model, or other mishandling of the FOMA terminal. 󱛡You are advised to save your important data on the microSD card. If you have a personal computer, you can transfer and save data such as Phonebook entries, mail messages, schedule events, and others on the personal computer by using DOCOMO keitai datalink.

3IntroductionPart Names and Functions❶Air ventFor adjusting the pressure inside the FOMA terminal❷EarpieceFor listening to the other party’s voice❸Display❹oCommand navigation keyFor operating functions and menus❺mMenu keyFor showing the Main Menu❻lMail keyFor showing the Mail Menu❼dStart keyFor starting to talk❽Numeric keysFor entering phone numbers and text❾QWEMulti one-touch key󱀓Light sensorFor sensing brightness (Do not cover it with your hands or do not put a sticker on it. Doing so might disable detecting the brightness.)󱀔MicrophoneFor speaking to the other party󱀕cCamera key/1Seg key󱀖rClear key/i-channel key󱀗ii-mode key/i-αppli key󱀘hPower/End keyFor turning on/off the power or ending a call❷❸󱀗󱀘❻❹󱀖󱀕󱀔󱀓❾❽❺❼❶

4Introduction󱀙Call/Charging indicatorLights while you are receiving a call or message, or charging.󱀚Sub-display󱀛FOMA antenna※󱀜CameraFor shooting portraits and/or landscapes󱀝Speaker󱀞Back coverRemove this when attaching/removing the battery pack, docomo mini UIM card, and microSD card.󱀟1Seg antenna※/Bluetooth® antenna※For using reception of 1Seg broadcasting and Bluetooth communication󱀠Infrared data portFor using infrared communication and the infrared remote control󱀡Strap hole󱀢xMulti keyFor showing the Task menu󱀣One-push open buttonFor opening the FOMA terminal (Be careful not to drop the FOMA terminal by the rebound when opened.)󱀤Connector terminalIntegrated terminal for connecting earphone or for charging, etc.For using earphoneConnect an optional connector-terminal- compatible earphone. When using a connector-terminal-non-compatible earphone, use an optional plug adapter for connection.Example for connecting the Stereo Earphone Set 01 (option) to external connector terminalThis mobile phone serves as the port where both the AC Adapter (charging) and Stereo Earphone Set 01 (Earphone/microphone terminal) are plugged in.AC AdapterStereo Earphone Set 01󱀥Charging terminal※The antenna is embedded in the handset. Covering the area near the antenna with your hand may adversely affect the quality of the communication.󱀝󱀞󱀟󱀣󱀥󱀜󱀛󱀤󱀢󱀡󱀠󱀚󱀙❶

5Introduction ■Before using the FOMA terminal, read these safety precautions carefully so that you can use it correctly. After reading the precautions, keep them in a safe place. ■Be sure to observe these safety precautions to prevent you or those around you from inﬂicting injury and to avoid unnecessary damage to the property. ■The symbols below indicate the levels of danger or damage that can be caused if the particular precautions are not observed and equipments are not used properly.DangerThis symbol indicates that incorrect handling will almost certainly cause death or serious injury.WarningThis symbol indicates that incorrect handling poses a risk of causing death or serious injury.CautionThis symbol indicates that incorrect handling poses a risk of causing a slight injury or damage to the product or property. ■The following symbols show speciﬁc directions:Denotes actions prohibited to do.Denotes not to disassemble the units.Denotes not to use where the equipment may get wet, and avoid get it wet.Denotes not to touch with wet hands.Denotes mandatory instructions (matters that must be complied with).Denotes to pull the power plug out of an outlet. ■“Precautions” are divided into the following seven sections:General precautions for FOMA terminal, batteries, adapters, desktop holder, and docomo mini UIM card ...................... P.6Precautions for FOMA terminal .......................................................... P.7Precautions for batteries .................................................................... P.9Precautions for adapters and desktop holder ...................................P.10Precautions for docomo mini UIM card .............................................P.11Notes on using near electronic medical equipment ..........................P.11List of materials used ........................................................................P.12Don’tDo notdisassembleAvoidWaterNot wethandsDoPull thepower plugoutPrecautions ALWAYS FOLLOW THESE DIRECTIONS

6IntroductionGeneral precautions for FOMA terminal, batteries, adapters, desktop holder, and docomo mini UIM card DangerDo not use, store, or leave the FOMA terminal or its accessories in places with a high temperature (such as near ﬁre, near heating appliances, inside a kotatsu or near other furniture with heating elements, in places exposed to direct sunlight, or in cars heated by the sun).Fire, burns, or injury may result.Do not place the FOMA terminal or its accessories inside cooking appliances such as microwave ovens or high-pressure containers.Fire, burns, injury or electric shock may result.Do not attempt to disassemble or remodel the FOMA terminal or its accessories.Fire, burns, injury or electric shock may result.Do not allow the FOMA terminal or its accessories to get wet either from water, drinking water or pet urine, etc.Fire, burns, injury or electric shock may result. See “Waterproof/Dust-proof Performance” on page 16 for details on waterproof performance.With your FOMA terminal, use the batteries and adapters speciﬁed by NTT DOCOMO, INC.Fire, burns, injury or electric shock may result. WarningDo not throw the FOMA terminal or accessories, or subject them to severe force or shocks.Fire, burns, injury or electric shock may result.Do not allow electrically conductive foreign objects (such as metal pieces or pencil leads) to come into contact with the FOMA terminal’s charging terminal or connector terminal. Do not allow such objects to enter into the FOMA terminal.Fire, burns, injury or electric shock may result.Do not cover or wrap the FOMA terminal or its accessories with a cushion, etc. while it is being used or recharged.Fire or burns may result.Before entering a gas station or other places where ﬂammable gases are generated, be absolutely sure to turn off the FOMA terminal and stop charging if it is being charged.Otherwise, the ﬂammable gases may ignite. If odor, overheat, discoloration, or deformation is detected during use, battery charge, or storage, immediately follow the instructions below:• Pull the power plug out of the outlet or cigarette lighter socket.• Turn off the power of the FOMA terminal.• Remove the battery pack from the FOMA terminal.Fire, burns, injury or electric shock may result. CautionDo not place the FOMA terminal or accessories on unstable locations such as wobbly tables or slanted locations.They may fall off and cause injury.Do not store in humid or dusty places, or in high temperature environments.Fire, burns or electric shock may result.If the FOMA terminal and its accessories are used by a child, a guardian should explain how to operate them correctly. During use, a guardian should also check that they are being used as instructed.Otherwise, injury may result.Don’tDon’tDo notdisassembleAvoidWaterDoDon’tDon’tDon’tDoDoDon’tDon’tDo

7IntroductionKeep out of the reach of babies and infants.Accidental swallowing or injury may result.Take special care when you use the FOMA terminal for a long time with the adapter connected.If you use the i-αppli programs, talk on the videophone, watch 1Seg programs and so on for a prolonged period of time while charging, the temperature of the FOMA terminal, battery pack or adapter may rise. If you keep direct contact with high-temperature parts, redness, itching, a rash or low-temperature skin burns may result depending on the state of your physical condition or constitution.Precautions for FOMA terminal WarningDo not directly point the infrared data port at someone’s eyes during transmission.Doing so may harm the person’s eyes.While using infrared communication, do not point the FOMA terminal’s infrared data port at a home electrical appliance which is equipped with an infrared device.The infrared device may malfunction, and possibly cause an accident.Do not allow liquids such as water, or foreign materials such as metal pieces or ﬂammable materials to get into the docomo mini UIM card or microSD card slot of the FOMA terminal.Fire, burns, injury or electric shock may result.Turn off the FOMA terminal in places where use is prohibited such as in airplanes and hospitals.Otherwise, the electronic devices and electronic medical equipment in those places may be adversely affected. If the Auto power ON function is set, deactivate the setting, then turn off the power. For use inside medical facilities, make sure that you comply with their regulations. Engaging in any prohibited acts such as using the FOMA terminal in an airplane is punishable by law. However, it may be possible to use a FOMA terminal in an airplane, such as by setting radio wave emission to off. Comply with the instructions given by the airline company.When talking in Hands-free mode or when a ring tone is sounding, be absolutely sure to keep the FOMA terminal away from your ear. Further, when you play games or play back music with the earphone/microphone etc. connected, adjust the sound volume to moderate volume.The excessive sound volume impairs your hearing. Further, accidents may result due to the hardness of hearing of surrounding sound.For those with weak heart conditions, the vibrator and ring volume must be adjusted carefully.Otherwise, the functions may adversely affect your heart.If you are using an electronic medical device or other type of device, check with its manufacturer or vendor as to whether it will be affected by the signals from the FOMA terminal.The FOMA terminal may adversely affect the device.DoDoDon’tDon’tDon’tDoDoDoDo

8IntroductionTurn off the FOMA terminal when near electronic devices using high-precision control or weak signals.The FOMA terminal may cause the electronic devices to malfunction and have other adverse effects.※ Electronic devices that may be affected: Hearing aids, implanted cardiac pacemakers, implanted deﬁbrillators, other electronic medical equipment, ﬁre alarms, automatic doors and other automatically controlled devices. If you use an implanted cardiac pacemaker, implanted deﬁbrillator or any other electronic medical equipment, consult the manufacturer or retailer of the device for advice regarding possible effects from the radio waves.If the display part or camera lens is broken, be careful about broken glasses or the exposed interior of the FOMA terminal.A plastic panel is used for the surface of the display area and camera lens, making it hard for the glass to break into pieces. However, if you touch the damaged or exposed parts by mistake, you may injure yourself. CautionDo not swing around the FOMA terminal by its strap or other parts.You may hit yourself or others, possibly causing injury or other accidents.Do not use the FOMA terminal if it has been damaged.Fire, burns, injury or electric shock may result.If you accidentally damage the display part and the substance inside leaks out, keep your face, hands and skin away from it.Otherwise, you may impair your eyesight or damage your skin. If this substance should get into your eyes or mouth, immediately rinse them with clean water, and then seek medical attention. If it should adhere to your skin or clothing, immediately wipe it off with alcohol or similar liquid, and then rinse the affected area with soap and water.Do not open the FOMA terminal by pressing the one-push open button near persons around you or your face.The FOMA terminal may hit you or persons around you, causing accidents and injuries.Before using the FOMA terminal inside a car, check with its manufacturer or dealer whether the signals from the FOMA terminal will have any adverse effects.In some vehicle models, the signals may adversely affect the electronic devices inside the vehicle. Such cases are rare. However, if this happens, stop using the FOMA terminal immediately.Itching, rash or eczema may be caused depending on your physical conditions or predisposition. If an abnormality occurs, stop using the FOMA terminal immediately, and then seek medical attention.See “List of materials used” on page 12 for material of each part.Be careful not to get your ﬁnger or a strap caught in the parts when you close or open the FOMA terminal.Otherwise, injury or other accidents may result.View the display in a sufﬁciently light place keeping a certain distance from your eyes.Otherwise, your eyesight may become impaired.DoDoDon’tDon’tDon’tDon’tDoDoDoDo

9IntroductionPrecautions for batteries ■Check the description on the label of the battery pack for the type of battery.Description TypeLi-ion 00 Lithium-ion battery DangerDo not let any metal object such as a wire come in contact with the battery terminals. Also do not carry or store the battery together with any metal objects like a necklace.Otherwise, the battery pack may ignite, burst or overheat and its electrolyte may leak.When installing the battery in the FOMA terminal, check that it is facing the right way, and if the battery cannot be installed easily, do not force it into place.Otherwise, the battery pack may ignite, burst or overheat and its electrolyte may leak.Do not throw the battery into ﬁre.Otherwise, the battery pack may ignite, burst or overheat and its electrolyte may leak.Do not pierce it with nails, hit it with a hammer, or step on it.Otherwise, the battery pack may ignite, burst or overheat and its electrolyte may leak.If the battery ﬂuid or other material gets into your eyes, do not rub them. Flush your eyes with clean water and seek medical attention immediately.Otherwise, the loss of eyesight may result. WarningNever use the FOMA terminal if it has damages such as deformities or scratches as a result of dropping it.Otherwise, the battery pack may ignite, burst or overheat and its electrolyte may leak.Immediately stop using the FOMA terminal and keep it away from ﬁre if the battery leaks or emits an odor.The leaked battery ﬂuid may ignite, causing ﬁre or burst.Be careful that your pets do not bite into the battery pack.Otherwise, the battery pack may ignite, burst or overheat and its electrolyte may leak. CautionDo not dispose of the exhausted battery with other waste.The battery may catch ﬁre or damage the environment. After insulating the battery terminals with tape, take the unneeded battery to a handling counter such as a docomo Shop or dispose of it in accordance with local waste disposal regulations.Do not use or attempt to charge a wet battery.Otherwise, the battery pack may ignite, burst or overheat and its electrolyte may leak.If the electrolyte ﬂuid or other material inside the battery has leaked out, do not allow it to come into contact with the skin on your face, hands or any other part of your body.Contact may result in loss of sight or skin problems. If you get the ﬂuid or other material in your eyes or mouth, or on skin or clothing, immediately wash the affected areas with clean water. If you get it in your eyes or mouth, immediately seek medical attention after rinsing.Don’tDon’tDon’tDon’tDoDon’tDoDoDon’tDon’tDo

10IntroductionPrecautions for adapters and desktop holder WarningDo not use the adapter if its cord has been damaged.Fire, burns or electric shock may result.Do not use the AC adapter and desktop holder in humid places such as a bathroom.Fire, burns or electric shock may result.The DC adapter is for use only in a negative (-) grounded vehicle. Do not use it in a positive (+) grounded vehicle.Fire, burns or electric shock may result.If a thunderstorm is nearby, do not touch the adapter.Otherwise, you may receive an electric shock.Never short-circuit the charging terminal when the adapter is plugged into the power outlet or cigarette lighter socket. Also, never touch the charging terminal with ﬁngers or other bare skin.Fire, burns or electric shock may result.Do not place heavy objects on the adapter cord.Fire, burns or electric shock may result.When plugging the AC adapter into the power outlet, or when unplugging it from the outlet, do not allow metal straps or other metal objects to come in contact with it.Fire, burns or electric shock may result.Do not touch the adapter cord, desktop holder, or power outlet with wet hands.Fire, burns or electric shock may result.Use the adapter at the speciﬁed V AC. When charging the FOMA terminal overseas, use the AC adapter available for use overseas to charge the FOMA terminal.Supplying the wrong voltage to the AC adapter may result in a ﬁre, burns or electric shocks. AC adapter: 100 V AC DC adapter: 12/24 V DC [For negative (-) grounded vehicles only] AC adapter available for use overseas: 100 V to 240 V AC [Connect only to household AC outlet]If a fuse of the DC adapter has blown, replace it with a speciﬁed fuse.Fire, burns or electric shock may result. For the speciﬁed fuse, refer to each instruction manual.Keep the power plugs dust-free.Fire, burns or electric shock may result.When plugging the AC adapter into the power outlet, plug it in securely.Fire, burns or electric shock may result.When unplugging the power plug from the power outlet or cigarette lighter socket, do not yank the adapter cord, but take hold of the adapter to unplug it.Fire, burns or electric shock may result.When you do not intend to use the adapter for a long period of time, disconnect the power plug from the power outlet or cigarette lighter socket.Fire, burns or electric shock may result.Don’tDon’tDon’tDon’tDon’tDon’tDon’tNot wethandsDoDoDoDoDoPull thepower plugout

11IntroductionIf liquids such as water get in the adapter, unplug the power cord immediately from the outlet or cigarette lighter socket.Fire, burns or electric shock may result.Before cleaning, pull the power plug out of the outlet or cigarette lighter socket.Fire, burns or electric shock may result.Precautions for docomo mini UIM card CautionBe careful not to touch the cut surface of the docomo mini UIM card when removing it.Otherwise, injury may result.Notes on using near electronic medical equipment WarningIf you use electronic medical equipment such as an implanted cardiac pacemaker or implanted deﬁbrillator, use the FOMA terminal 15 cm or more away from an implanted cardiac pacemaker or implanted deﬁbrillator.The FOMA terminal’s signals may adversely affect the operation of electronic medical equipment.Patients using electronic medical equipment other than implanted cardiac pacemakers or implanted deﬁbrillators (outside medical establishments for treatment at home, etc.) should check the inﬂuence of radio waves upon the equipment by consulting its manufacturer.The FOMA terminal’s signals may adversely affect the operation of electronic medical equipment.If the FOMA terminal has a chance of coming within 15 cm of other persons, such as when you are in an area where you cannot move freely, switch the FOMA terminal to a state in which it does not emit radio waves (such as by switching it to Self mode or turning the power off).A person nearby might be using an electronic medical device such as an implanted cardiac pacemaker or implanted deﬁbrillator. The FOMA terminal’s signals may adversely affect the operation of electronic medical equipment.When using the FOMA terminal within a medical institution, follow the instructions of that medical institution.Pull thepower plugoutPull thepower plugoutDoDoDoDoDo

12IntroductionList of materials used ■P-01F Handset/Back Cover P61/Battery Pack P23Where it is used Material/FinishingOuter casingDisplay surface, Battery surface, Battery surface (Hinge side)PC/UV coatingConnector terminal Stainless steel/nickel plating, tin platingConnector terminal coverBody PC/UV coatingFitting pin areaPolyester series elastomerPacking Silicon rubberPanel of camera lens area, Display panel, Sub-display panelPMMA/hard coatingSide key ABSAround the side key ABS/UV coatingCharging terminal Brass/nickel plating, nickel palladium plating, gold platingKey area, Sheet area of numeric key surfaceAcrylic urethaneBattery compartment surfaceStainless steel/nickel platingWhere it is used Material/FinishingBattery terminalResin part PATerminal areaTitanium copper alloy/nickel plating, gold platingBattery packResin part PCTerminal areaGlass epoxy/nickel plating, gold platingLabel PET/Silicon varnishdocomo mini UIM card traySubstrate partGlass epoxy/gold plating, resist printingResin part of trayLCPMetal part of trayStainless steelHinge area Center area of display surface, Hinge support area, Both ends areaPC/UV coatingCenter area of sub-display surfaceABS/UV coatingLabel (Battery compartment surface)PETBack cover Body PC/UV coatingPacking Silicon rubberOne-push open button PC ■Desktop Holder P54Where it is used Material/FinishingOuter casing ABSConnector terminal PPSCushion UrethaneCharging terminal Phosphor bronze/nickel plating, gold platingLabel PSLever POMHandling PrecautionsGeneral notes ■The P-01F is provided with the waterproof/dust-proof performance, however, do not allow water to seep or dust to get in the inside of the FOMA terminal, or do not allow accessories and optional items to get wet or adhere dust.The battery, adapter, desktop holder, and docomo mini UIM card are not waterproofed/dust-proofed. Do not use them in environments, which are high in humidity such as in bathrooms, and do not allow them to get wet from rain. Furthermore, if carrying them against your body, they become moist due to perspiration and the internal parts may become corroded, causing malfunction. If the parts are found to have been damaged due to exposure to the liquids, any repairs will not be covered by warranty, or repairs may not be possible. This may be repaired at a cost if repairs are possible.

13Introduction ■Use a dry soft cloth such as the one for cleaning glasses to clean the equipment. 󱛡The display may be scratched if it is rubbed hard with a dry cloth. 󱛡Stains may result from droplets of water or dirt if they are left on the display. 󱛡Do not use alcohol, thinner, benzene, detergent or other solvents for cleaning, otherwise the printing may be removed or discoloration may result. ■Occasionally clean the terminals of the equipment using a dry cotton swab, etc.The soiled terminals deteriorate the connection and might cause power discontinuity or incomplete charging. Wipe the terminals with a cotton swab, etc. Take care not to damage the terminals when cleaning them. ■Do not place the FOMA terminal near an air conditioner outlets.Condensation may form due to rapid changes in temperature, and this may corrode internal parts and cause malfunction. ■Do not apply excessive force onto the FOMA terminal and battery pack.If you put the FOMA terminal in a bag along with many other articles or sit with the FOMA terminal in a clothes pocket, the display, internal circuitry and the battery pack could be damaged or malfunction. Also, if an external device is left connected to the connector terminal (earphone/microphone terminal), the connector could be damaged, or malfunction. ■Do not rub or scratch the display part with metals.Doing so might cause damage to the part, resulting in trouble or malfunction. ■Carefully read each instruction manual attached to optional items.Notes on handling the FOMA terminal ■Avoid using in extremely high or low temperatures.The FOMA terminal should be used within a temperature range of 5°C to 35°C and a humidity range of 45% to 85%. ■If the FOMA terminal is operated near a land-line phone, television set, radio or other devices in use, it may adversely affect the devices. Operate the FOMA terminal as far away from these devices as possible. ■It is recommended that you make separate notes of the information stored in the FOMA terminal and keep such notes in a safe place.We take no responsibility for any loss of the stored data items. ■Do not drop the FOMA terminal or subject it to strong impacts.Malfunction or damage may result. ■Do not insert an external device to the connector terminal (earphone/microphone terminal) at a slant when connecting, and do not pull it out when it is inserted.Malfunction or damage may result. ■Make sure that nothing, such as a strap, gets caught between the parts of the FOMA terminal when you close it.Otherwise, malfunction or damage may result. ■The FOMA terminal becomes warm during use or charging but this is not an abnormality. Use the FOMA terminal as it is. ■Do not leave the camera in places exposed to direct sunlight.Pixels may be discolored or burns may result. ■When using the FOMA terminal, ensure that you shut the cover for the connector terminal.Dust or water might enter into the FOMA terminal, causing malfunction. ■Do not use the FOMA terminal with the back cover left removed.The battery pack might come out, or malfunction or damage may result. ■Do not apply an excessively thick sticker onto the surfaces of the display or keys.Otherwise, malfunctioning, damage or problems with operation may result. ■While you are using the microSD card, never take it off or turn off the power of the FOMA terminal.Data may be erased or malfunction may result. ■Do not place magnetic cards or similar objects near the FOMA terminal or between phone parts.Magnetic data on cash cards, credit cards, telephone cards and ﬂoppy disks, etc. may be deleted. ■Do not bring magnetic substances close to your FOMA terminal.Problems with operation may result if items with strong magnetic ﬁelds are brought close to the FOMA terminal.Notes on handling batteries ■Batteries have a limited life.Though it varies depending on the usage state, you are advised to replace the battery if its usable time is extremely short even when you fully charge it. Make sure that you buy the speciﬁed battery.

14Introduction ■Charge the battery in a place with an appropriate ambient temperature of 5°C to 35°C. ■The usable time of the battery differs depending on the usage environment or its remaining life. ■Depending on how the battery pack is used, it might swell as its operating life becomes short, but this is not a problem. ■Note the following points when you store a battery pack: 󱛡Storage in a fully charged state (the state immediately after charging is completed) 󱛡Storage with no battery power left (the state you cannot turn on the power of the handset due to battery drain)These may lower the battery pack’s performance and shorten its operating life. Before storing a battery, check its remaining battery level: it is recommendable, as a general rule, for the battery icon to show two bars or for its remaining battery level to be about 40%.Notes on handling adapters and desktop holder ■Charge the battery in a place with an appropriate ambient temperature of 5°C to 35°C. ■Charge the battery where: 󱛡There is very little humidity, vibration, and dust. 󱛡There are no land-line phones, television sets or radios nearby. ■While you are charging, the adapter may become warm. This is not a malfunction, so you can keep on using. ■Do not use the DC adapter for charging the battery when the car engine is not running.The car battery could go ﬂat. ■When using the power outlet having the disengaging prevention mechanism, observe the instructions given in that instruction manual. ■Do not give a strong shock. Also, do not deform the charging terminal.Malfunction may result.Notes on handling the docomo mini UIM card ■Do not apply more force than is necessary when installing or removing the docomo mini UIM card. ■The warranty does not cover damage caused by inserting the docomo mini UIM card into some other types of IC card reader/writer. ■Always keep the IC portion clean. ■Use a dry soft cloth such as the one for cleaning glasses to clean the equipment. ■It is recommended that you make separate notes of the information stored on the docomo mini UIM card and keep such notes in a safe place.We take no responsibility for any loss of the stored data items. ■For the environmental protection, bring unneeded docomo mini UIM card to a handling counter such as a docomo Shop. ■Do not damage, carelessly touch, or short-circuit the IC.Data might be lost or malfunction may result. ■Do not drop the docomo mini UIM card or subject it to strong impacts.Malfunction may result. ■Do not bend the docomo mini UIM card or place something heavy on it.Malfunction may result. ■Into the FOMA terminal, do not insert the docomo mini UIM card with a label or sticker pasted.Malfunction may result.Notes on using Bluetooth function ■The FOMA terminal supports the security function that meets the Bluetooth Speciﬁcation, to secure Bluetooth communication. However, the security may not be sufﬁcient depending on the settings. Take care of the security for communication when using the Bluetooth function. ■Note that even if any leak of data or information occurs while making connection using the Bluetooth function, we take no responsibility.

15Introduction ■Radio frequencies The radio frequencies for the Bluetooth function of the FOMA terminal are as follows:2.4 FH 12.4 ： Indicates radio facilities that use 2400 MHz frequencies.FH ： Indicates modulation is the FH-SS system.1 ： Indicates that an estimated interference distance is 10 meters or less. ： Indicates that all radio frequencies 2400 MHz through 2483.5 MHz are used, and that the frequencies for mobile object identiﬁers shall not be avoided.To use on airplane, conﬁrm with airline company in advance.Use of Bluetooth may be prohibited in some countries. Please conﬁrm laws and regulations applicable in the country/regionbefore use. ■Cautions on Using Bluetooth DevicesBluetooth operates at radio frequencies assigned to the in-house radio stations for mobile object identiﬁers that have to be licensed and are used in production lines of a factory, speciﬁc unlicensed low power radio stations, and amateur radio stations (hereafter, referred to “another radio station”) in addition to scientiﬁc, medical, industrial devices, or home electric appliances such as microwave ovens.1. Before using this product, make sure that “another radio station” is not operating nearby.2. If radio interference between this product and “another radio station” occurs, move immediately to another place or turn off power to avoid interference.3. For further details, contact “docomo Information Center” on the back page of this manual.Caution ■Do not use the modiﬁed FOMA terminal. Using a modiﬁed FOMA terminal infringes the Radio Law/Telecommunications Business Law.The FOMA terminal has been certiﬁed as conforming to the technical regulations of speciﬁed radio equipment under the Radio Law of Japan, as well as to those of terminal devices under the Telecommunications Business Law of Japan, and bears a “technical conformity mark ” on its nameplate as evidence of conformity. Unscrewing the FOMA terminal and modifying internal components void the technical regulations conformity certiﬁcation. Do not use the FOMA terminal in this state, which infringes the Radio Law and Telecommunications Business Law. ■Take special care not to operate the FOMA terminal while driving.Holding a mobile phone in your hand while driving is subject to a ﬁne or other penalties. However, this does not apply in unavoidable circumstances when, for instance, responding to someone who is sick or injured or when maintaining public order.

16IntroductionWaterproof/Dust-proof PerformanceYour P-01F is capable of IPX5※1 and IPX7※2 waterproof performance and IP5X※3 dust-proof performance if the connector terminal cover and back cover are ﬁrmly closed and no clearance gap and ﬂoat found in them.※1 IPX5 means that the P-01F maintains its performance as a phone even after a water jet ﬂow has been sprayed over the FOMA terminal from all directions under conditions where water in a volume of 12.5 liters/minute is sprayed from a distance of about 3 meters for at least 3 minutes using a water-pouring nozzle with an inside diameter of 6.3 mm.※2 IPX7 means that the P-01F maintains its performance as a phone even after the phone has been gently submerged in a container of still city water to a depth of 1 meter at room temperature, and left in place for about 30 minutes, and then removed from the water.※3 IP5X refers to the degree of protection, and indicates that the mobile phone has been tested by placing it in a chamber wherein dust particles measuring 75 μm in diameter or smaller are circulated for 8 hours, and then when the mobile phone is removed, it maintains correct operation as a phone and remains safe.(Note) This does not mean that the waterproof performance is guaranteed in all given conditions of actual use. Read this manual thoroughly before use to prevent invasion of water or foreign materials and then to enable you to safely use your FOMA terminal.You can operate the FOMA terminal in the rain, in your kitchen, and also around poolside.In the Rain 󱛡You can talk on the phone by holding the phone in the rain with your wet hand without umbrella. (Less than 20 mm/hour of rainfall, and your feet get wet by drops of rain rebounded off the ground)※When your hands are wet or water drops remain on the FOMA terminal, do not attach/remove the back cover, nor open/close the connector terminal cover.Wash 󱛡When the FOMA terminal gets dirty, you can slowly swing and wash it in a bowl ﬁlled with fresh water or tap water at an ambient temperature, or wash it by hand while running a slightly-weak water ﬂow from a faucet. 󱛡Wash your FOMA terminal with the back cover ﬁrmly attached and while you are pushing the cover of the connector terminal down. 󱛡Do not use brushes, sponges, soaps, or detergents for washing. 󱛡After rinsing off the FOMA terminal in water, wipe its surfaces thoroughly using a dry cloth, drain off the water (see page 19), and allow the FOMA terminal to dry out naturally.On Leisure 󱛡Do not soak or drop your FOMA terminal into a pool or the sea nor operate it in water. 󱛡If pool water or seawater splash the FOMA terminal, wash the terminal by following the prescribed method (see page 16).In the Kitchen 󱛡Do not spray liquids other than fresh water or tap water at room temperature onto the FOMA terminal or soak the terminal in them. 󱛡Do not spray hot water or cold water onto the FOMA terminal or soak it in them.Important Information before Use 󱛡Before using the FOMA terminal, make sure that you attach the back cover ﬁrmly after tightly closing the connector terminal cover. If there is any small particles (ﬁne ﬁbers, hair or grains of sand) between the covers and the phone, water or dust could ﬁnd its way inside the phone. When attaching the back cover after closing the connector terminal cover, ensure that there is no particles or dirt on or around these parts (especially the packing). 󱛡Ensure that the connector terminal cover and back cover are closed tightly and that none of these covers are askew. If the covers are not closed tightly, water or dust could ﬁnd its way inside the FOMA terminal. 󱛡To keep the waterproof/dust-proof performance, we recommend replacing parts once every two years regardless of whether any irregularities are present. You are charged for replacement of parts. Take your FOMA terminal to a repair counter speciﬁed by DOCOMO.Soap/detergentSea/pool

17IntroductionOpening/Closing the Connector Terminal Cover ■Opening the connector terminal cover① Hook your ﬁngertip over the groove, pull out the cover to direction A, and rotate it as direction B. ■Closing the connector terminal cover① Align the connector terminal cover in parallel with the FOMA terminal, and while holding its base part ﬁrmly, push it into place.② Ensure that no ﬂoat is found with the connector terminal cover as a whole.Removing/Attaching the Back Cover ■Removing the back cover① Hook your ﬁngertip over the concave part of the FOMA terminal, lift up in the direction of the arrow to remove the back cover. 󱛡Removing the back cover might produce a sound. 󱛡The back cover should be ﬁrmly closed for maintaining waterproofness/dust-proofness. Opening the cover forcibly may injure your nails or ﬁngers. ■Attaching the back cover① Fit the claws at the bottom side of the back cover to the FOMA terminal securely (A), and ﬁt the claws at the left, right and upper sides of the back cover into the corresponding indentations, and push the cover into place (B).Claw (left, right, and upper)PackingRear surface of back coverClaw (bottom)②Push the 10 ○ marks printed on the sticker of the back cover, and ensure that no ﬂoat is found anywhere on the cover.③ Conﬁrm there is no gap between the back cover and the FOMA terminal.GrooveBase partConcave part

18IntroductionCaution ■About FOMA terminal 󱛡Do not wash the FOMA terminal with a washing machine or ultrasonic cleaner. 󱛡Never charge the battery when it gets wet. 󱛡Do not leave the FOMA terminal with drops of water remained on.・ The connector terminal might be short-circuited.・ Water might enter into the inside of the FOMA terminal through the keys or hinges. In cold districts, drops of water on the FOMA terminal might freeze, resulting in malfunction.If the FOMA terminal gets wet, keep the back cover attached and the connector terminal cover closed, drain off the water (see page 19), and immediately wipe off the moisture remaining on the FOMA terminal with a clean dry cloth. 󱛡Do not drop the FOMA terminal nor give a shock to it. The deterioration of the waterproof/dust-proof performance might result depending on the damage. 󱛡Do not soak the FOMA terminal in hot water, use in a sauna, nor expose to hot wind currents such as those of a dryer. 󱛡The FOMA terminal does not ﬂoat on water. 󱛡Do not directly expose to the strong water ﬂows that exceed the standard (see page 16) or submerge the mobile phone in water. 󱛡Do not directly place the FOMA terminal on sandy beaches.･ Sands enter into the holes on the microphone, earpiece, or speakers may reduce the volume.･ If you operate the FOMA terminal with water drops or sands adhered to, sound might be deteriorated.･ Even the slightest sands entered from the connector terminal cover or back cover could cause water or dust to enter the inside of the FOMA terminal. ■About the connector terminal cover and back cover 󱛡Do not open or close them with gloves put on hands. Fine dirt might adhere to the contact surface of the packing. 󱛡Be careful that no ﬁbers adhere to the packing when you try to wipe off moisture with a clean dry cloth. 󱛡Do not peel the packing off. Also do not insert something pointed at the head into the clearance of the connector terminal cover or back cover. The packing is damaged, resulting in water or dust to enter into the FOMA terminal. 󱛡If the packing for the connector terminal cover or back cover is damaged or deformed, replace them at a repair counter speciﬁed by DOCOMO. 󱛡If the back cover is broken, replace it with new one. Otherwise liquid such as water enters into the inside of the FOMA terminal through broken portions, and an electric shock or corrosion of the battery pack could result. 󱛡When the FOMA terminal gets wet with the connector terminal cover or back cover left open, water enters inside, and an electric shock or malfunction could be caused. Do not use it as is, but turn off the power, remove the battery pack, and then take it to a repair counter speciﬁed by DOCOMO. ■About microphone, earpiece, air vent, and speakers 󱛡Do not thrust something pointed at the head into the holes on microphone, earpiece, air vent, or speakers. 󱛡Do not leave water drops adhered to them. It might happen that communications are disabled. ■Others 󱛡Accessories and optional items are not waterproofed/dust-proofed. Do not use the desktop holder provided in a bathroom, shower room, kitchen, or lavatory where water is used, even if you do not connect to AC adapter. 󱛡It is not that the waterproof performance is guaranteed in all given conditions of actual use. If the damage is found to be caused by your mishandling of the FOMA terminal as a result of our inspection, the guarantee is not supported.

19IntroductionDraining Water 󱛡If you operate the FOMA terminal with water drops left adhered to, the volume level from the speakers might be decreased or sound quality vary. 󱛡Moisture may have entered inside through the clearance gap of the keys or hinges.Follow the procedures described below to wipe moisture off the FOMA terminal:① Wipe completely moisture off the surface of the FOMA terminal with a clean dry cloth.② Securely take hold of the FOMA terminal, and ﬁrmly swing each surface at least 20 times until no moisture sprays off.<Draining from earpiece and air vent><Draining from microphone><Draining from speaker and air vent>③ Lightly push the FOMA terminal against a clean dry cloth, and wipe moisture off the clearance gap of the microphone, earpiece, air vent, speaker, keys, or hinges. 󱛡Do not directly wipe moisture out of joint gap using a cotton swab, etc.④ Fully drain moisture and then operate the FOMA terminal. 󱛡Even when you follow the procedures for draining water as described above, moisture might remain in the FOMA terminal. Therefore, use the FOMA terminal after allowing it to dry out naturally. Also, take care to keep any objects you do not want to get wet away from the FOMA terminal since water may leak out from the FOMA terminal.When Charging BatteryAccessories and optional items are not waterproofed/dust-proofed. Check the following before and after charging: 󱛡Never charge the battery with the FOMA terminal left wet. If the FOMA terminal gets wet, drain and wipe off moisture with a clean dry cloth and then charge. 󱛡When you charge the battery with the connector terminal cover open, ﬁrmly close it after charging. To prevent water or dust from entering inside through the connector terminal, you are advised to use the desktop holder provided for charging. 󱛡Do not touch the AC adapter and desktop holder with your hands wet. 󱛡Do not use the AC adapter and desktop holder in a bathroom, shower room, kitchen, and lavatory where water is used.

20Basic OperationBefore UsingAttaching docomo mini UIM card/Battery PackTo insert the docomo mini UIM card/battery pack, remove the back cover and insert. (See page 17)1Insert the docomo mini UIM card.1. Pulling the tab of the tray with your ﬁnger, slowly pull the tray straight out until it stops. 󱛡The tray cannot be removed, so be sure not to pull the tray beyond the position at which it stops. Doing so might damage the tray or tab.2. With the gold IC side of the docomo mini UIM card facing up, check that the cut is facing left, and place the card in the tray.3. Push the docomo mini UIM card until it stops. 󱛡Push the docomo mini UIM card inward ﬁrmly until it is in place.When you remove the docomo mini UIM cardPull out the tray, and then slide the docomo mini UIM card slowly to pull it out. 󱛡After pulling out the tray until about half of the docomo mini UIM card is visible, pull out the docomo mini UIM card by sliding it out.2Attach the battery pack.Combine the terminal area of the battery pack with the battery terminal area of the FOMA terminal, and then push in the A direction while pushing down in the B direction.When you remove the battery packLift the battery up using the projection of it. 󱛡Ensure that you turn off, close, and take hold of the FOMA terminal when you install or remove the docomo mini UIM card or battery pack. 󱛡You can use only a docomo mini UIM card with this FOMA terminal. If you have a docomo UIM card or FOMA card, replace it at a handling counter of a docomo Shop.TabCutArrow markProjection

21Basic OperationChargingCharging Using Desktop HolderDesktop HolderCall/Charging indicatorEngraved surface Power socketAC AdapterAC Adapter’s plugConnector1With the engraved surface of the connector of the AC Adapter (option) face up, plug the connector straight into the connector terminal of the desktop holder provided.2Pull out the AC Adapter’s plug, and plug it into a household power socket of 100 V AC.3Set the FOMA terminal for charging terminal side down onto the desktop holder securely. 󱛡Be careful that a commercial strap is not caught between the FOMA terminal and desktop holder.4When charging is completed, hold the desktop holder and lift up the FOMA terminal to remove.Charging Using AC AdapterCoverRelease buttonsConnector terminalAC Adapter’s plug Call/Charging indicatorEngraved surfaceConnectorPower socketAC Adapter1Open the cover of the connector terminal. (See page 17) 󱛡To charge the battery, place the cover of the connector terminal as illustrated. When you close or open the FOMA terminal with the cover of the connector terminal opened, be careful not to catch the cover of the connector terminal between the parts of the FOMA terminal. 2Insert the connector horizontally with the engraved surface facing up until it clicks.3Pull out the AC Adapter’s plug, and plug it into a household power socket of 100 V AC.4When charging is completed, pull out the connector from the connector terminal while pressing the release buttons.

22Basic Operation 󱛡For detaching, pull out the connector horizontally while pressing the release buttons. Malfunction could result if you try to pull it forcibly. 󱛡When charging starts, the Call/Charging indicator lights in red. When charging is completed, it turns off. Turning Power ON1Press and hold h for at least one second.After the notes of waterproof and Wake-up display are displayed, the Stand-by display appears.To turn off the power1. Press and hold h (for at least two seconds)▶YES 󱛡Depending on the display in operation, the conﬁ rmation display may not appear. Conﬁ guring Initial SettingThe Initial Setting display appears when you turn on the power for the ﬁ rst time.1Set the date and time▶Set your Terminal Security Code※▶Set the size of fonts▶Set Keypad Sound.※“0000” is set at purchase. Notifying Your Caller ID on the Other Party’s Phone1m▶TEL function▶Dial/Receive setting▶Caller ID notiﬁ cation▶Activate/Deactivate▶ON 󱛡If you hear the guidance requesting your caller ID, either set the Caller ID notiﬁ cation or add “186” ﬁ rst and then try calling again. Checking Your Own Phone NumberYou can check your own phone number ( Own number), the model name, etc.1m▶Proﬁ le 󱛡Press c() to store your name, mail address, etc. 󱛡Refer to “Mobile Phone User’s Guide [i-mode]” for how to check or change your mail address.Switching to English Display1m▶本体設定 (Setting)▶文字表示／入力 (Text display/input)▶ Select language▶English 󱛡The “バイリンガル (Select language)” setting is saved on the docomo mini UIM card.

23Basic Operation Status icon Screen Explanation Viewing Display/Icon Battery level (estimate) Full Low 󱛡When is shown, charge the battery. 󱛡Depending on the usage state, the battery level indication might signiﬁ cantly vary. Radio waves reception level (estimate) Strong Weak ············ You are out of the FOMA service area or radio waves do not reach. ··············· In eco Mode(gray) ······ eco Mode Autostart is set. ············· Unread i-mode mail or SMS messages exist. ············· New i-concier information exists. ···········A Bluetooth device is connected. ··········· A microSD card is inserted. ·········· Vibrator is set. ·········· Ring Volume is set to “Silent”. ·········· In Manner Mode ···· An alarm is set. ··········· The number of record messages ··········· The number of videophone record messages 󱛡Here are given descriptions of the main icons. For descriptions of other icons appearing on the display, you can get them following the procedures as shown below:m▶Setting▶Screen/Display▶Icons

24Basic OperationProceed to respective functions from icons, etc.You can proceed to respective functions by selecting “Status icon”, “Notiﬁ cation icon”, “Stand-by shortcut”, or date and time.1. Oo▶Use Mo to highlight an icon, etc.▶Oo( ) Sub-displayVarious information is displayed on the sub-display such as the following:Information is displayed in cases such as when you press x with the FOMA terminal closed. 󱛡While the clock is displayed, each time you press x, you can switch the clock pattern.Clock Dialing Receiving a callWhen a missed call is found“” appears in cases such as when the FOMA terminal is closed.Press x to display the missed call record.When a new mail message is received“” appears in cases such as when the FOMA terminal is closed.Press x to display the received date/time and subject. 󱛡To display the received date/time and subject, you need to set “Mail” of “Sub-display setting” to “ON” in advance.1. m▶Setting▶Screen/Display▶Sub-display setting▶ON▶Mail▶ON▶c( ) Notiﬁ cation icon ······ New i-mode mail or SMS ······Missed call ······ Record message······Videophone record message ····· The mode has automatically changed to eco Mode ( ECO NAVI). ····· 1Seg has automatically terminated ( ECO NAVI). Stand-by shortcut ····· i-concier ····· dmarket ·····地図アプリ (Map Application) ····· Guide

25Basic Operation Navigation Displays and Key OperationsKey operations you can perform while you are operating a function are shown at the bottom of the display. (Navigation displays) ■Key assignments and basic navigation displays❶Operations you can perform with the m key. ❷Operations you can perform with the l key. ❸Operations you can perform with the Oo key. Directions in which you can scroll and select items with the Mo key.❹Operations you can perform with the i key. ❺Operations you can perform with the c key. Operating Command Navigation KeyVo 󱛡Moves the cursor to the right. 󱛡Scrolls forward page by page. (Hold down to scroll continuously.)Zo 󱛡Moves the cursor or highlighted display up. (Hold down to scroll continuously.) 󱛡Scrolls the page up.Xo 󱛡Moves the cursor or highlighted display down. (Hold down to scroll continuously.) 󱛡Scrolls the page down.Oo 󱛡Fixes the operation.Co 󱛡Moves the cursor to the left. 󱛡Scrolls back page by page. (Hold down to scroll continuously.)

26Basic OperationMenu Operation Main MenuPress m from the Stand-by display to show Main Menu. 󱛡In this manual, the descriptions of operating procedures are given mainly starting with the Stand-by display. Stand-by display Main Menu Menu iconsMenu icon nameIn this manual, the item names shown here are described in operating procedures, etc.Use Mo to highlight a menu icon and press Oo( ). Functions categorized by the menu items are displayed. Repeat selecting items to call up the target function. 󱛡You can press r to return to the previous display. When you press h from any display, the Stand-by display returns. 󱛡See “Function List” for the menu items of each function. (See page 74) Simple MenuSimple Menu is a menu focusing on only basic functions for easy operation. By setting “シンプルメニュー (Simple menu)” using the Kisekae tool, you can show the Simple Menu by pressing m from the Stand-by display. 󱛡Some operating procedures or items which appear on the display in Simple Menu differ from the ones described in this manual. SubmenuWhen “ ” is displayed at the lower left of the display, you can use functions such as Store, Edit, and Delete by pressing m.<Example> Display the submenu of a Phonebook entry+m 󱛡The “ ” is displayed when there are further items under a particular menu item.

27Basic OperationFunctions Starting with Simple OperationDepending on the function, you can start it either by selecting a menu item or by key operation from the Stand-by display. The following are the functions you can start by pressing keys for at least one second.Key PerformanceOoSets/Releases Keypad Lock.ZoShows the Registration display for Phonebook entries.XoStarts i-widget.cStarts 1Seg.lExecutes Check mail/message.iShows the Software list.dExecutes Start by voice.※5Sets/Releases eco Mode.7Sets/Releases Outdoor Mode.8Switches View Blind on/off.aActivates/Deactivates Public mode (Drive mode).sActivates/Deactivates Manner Mode.x※This function is available in Japanese mode only. ■Operations while the FOMA terminal is closedKey PerformancexActivates/Deactivates Manner Mode.You can easily call up frequently used functions and telephone numbers which have been registered in multi one-touch keys. 󱛡Although functions have been registered in multi one-touch keys at purchase, you can change them. ■Registering function1. Q, W or E (for at least one second) ▶Select an item▶YESChanging the registered function1. Q, W or E (for at least one second)▶YES▶Set▶Select an item▶YES ■Calling up the function1. Press Q, W or E.Multi One-touch Function

28Basic Operation docomo Palette UIThe docomo Palette UI is a user interface that allows you to easily access a variety of functions and services from the center of the Stand-by display. You can freely customize this interface.The MyFACE display appears to the left and right of the Stand-by display, and the Shortcut display appears below.MyFACE displayStand-by displayMyFACE displayShortcut display Using MyFACEMyFACE is a convenient function that allows you to download MyFACE content from a site and register the content to the left or right of the Stand-by display. You can then immediately display the content by pressing No from the Stand-by display.+1No▶Operate MyFACE content.You can download MyFACE content from a site and register the content to the left or right of the Stand-by display.You can register up to 12 items, including the pre-installed MyFACE content.1. Display a site from which content can be downloaded▶Select a MyFACE content▶Use No to select a location▶Oo( )▶YES/NODownloading MyFACE Content 󱛡Depending on the MyFACE content, some information might be updated automatically, and communication is performed automatically at most once per hour. Packet communication fees are charged during these updates. (Packet communication fees are not charged for updates to the pre-installed MyFACE content.) 󱛡If you are using international roaming or have changed the i-mode connection destination settings, packet communication fees are charged even for updates to the pre-installed MyFACE content. 󱛡If some ﬁ les could not be acquired during an update of MyFACE content, all ﬁ les are re-acquired during the next update, resulting in packet communication fees being charged again.

29Basic Operation Using ShortcutA list of shortcuts appears at the bottom of the Stand-by display. By creating shortcuts to, for example, functions you use frequently, you can use certain functions immediately.1Press Xo. 󱛡Use No to highlight a Stand-by shortcut and press Oo( ). You can start the shortcut.2Press Xo.3Use Mo to highlight a shortcut and press Oo( ).1. On the display to which you want to create a shortcut, press m()▶Create shortcutCreating Shortcuts 󱛡If you have created a large number of shortcuts, the shortcut images might be replaced by alternate images. Using GuideYou can search and check the operating methods of the functions you want to know and use. You can execute some functions from “使いかたガイド (Guide)”.This function is available in Japanese mode only.1m▶便利ツール (Tool)▶使いかたガイド (Guide)2Enter a keyword or select a way of searching.Stand-by shortcut

30Basic Operation Character EntryYou can enter characters on the Registration display for Phonebook entries or the Composition display for mail messages, etc.1Select a input mode.Press l( ) to select one of the input modes.2Enter characters.By repeatedly pressing a numeric key, you can enter other characters assigned to the key.<Example> When you press 2Kanji/Hiragana input mode“か→き→く→け→こ”Katakana input mode“カ→キ→ク→ケ→コ→2”Alphabet input mode (Uppercase)“A→B→C→a→b→c→2”Alphabet input mode (Lowercase)“a→b→c→A→B→C→2”Numeral input mode“2” 󱛡When a character on the same key comes after a character such as “あ” and “い”, press Vo to move the cursor, and enter the next character. 󱛡You can press Bo to select one of the prediction conversion candidates while you are entering the characters.3Convert/ﬁ x characters.1. Press No to specify the area to be converted.2. Press Bo to move the cursor onto the candidate list.3. Press Mo to select a conversion candidate.4. Press Oo to ﬁ x the character.Other key operationsc(): Enter symbols, smileys, or URLs.i(): Enter pictograms, Deco-mail pictograms, or Deco-mail pictures.a: Enter a line feed.(You can switch between uppercase and lowercase or enter “゛” and “゜” by pressing this key after you enter a character.)d (for at least one second): Undo the ﬁ xed/erased characters.r: Clear text.

31Basic Operation Sound/Screen Setting Changing Ring Tone<Example> Changing the ring tone for incoming voice calls1m▶Setting▶Sound/Vib./Manner▶Select ring tone▶Phone※▶Select ring tone▶Select a type of ring tone▶Select a folder▶Select a ring tone.※To set a ring tone for mail messages, videophone calls, and so on, select the corresponding item. Adjusting Ring Volume<Example> Adjusting the ring volume for incoming voice calls1m▶Setting▶Sound/Vib./Manner▶Ring volume▶Phone※▶Use Bo to adjust the volume.※To adjust ring volume for mail messages, videophone calls, and so on, select the corresponding item. Setting Vibrator<Example> Setting the vibrator for incoming voice calls1m▶Setting▶Sound/Vib./Manner▶Vibrator setting▶Phone※▶Select a pattern.※To set a vibrator for mail messages, videophone calls, and so on, select the corresponding item. Using Manner ModeWith a single key press, you can set a tone from the FOMA terminal such as a ring tone, keypad sound, and alarm sound silent. When you start Manner Mode, not a sound but the vibration notiﬁ es you of incoming calls or messages.1Press and hold s for at least one second.“” appears on the Stand-by display.To releasePerform the same operation.You can use “Original” to tailor your FOMA terminal to how it works while Manner Mode is ON.1. m▶Setting▶Sound/Vib./Manner▶Manner mode setting▶Manner mode set▶Original▶Set each item▶c( )Using Original 󱛡Even in Manner Mode, the shutter tone and focus lock tone of the camera, and the start/end tones of the voice recorder sound.

32Basic Operation Setting Keypad Sound OFF1m▶Setting▶Sound/Vib./Manner▶Other sound setting▶Keypad sound▶OFFChanging Display Settings Changing Stand-by display1m▶Setting▶Screen/Display▶Stand-by display▶Stand-by display▶Select a type of image▶Select a folder▶Select an image. 󱛡You may be able to select a display format depending on the image. Changing Display BrightnessYou can adjust the brightness of the display. You can also set to automatically adjust the display brightness according to the ambient light.1m▶Setting▶Backlight/Illum.▶Backlight▶Brightness▶ON▶Press Bo to adjust the brightness.You can set the display brightness to OFF. You can also set the time that elapses before Power Saver Mode activates.Power Saver Mode activates when the time set for “Time to saver” has elapsed without any operations on the FOMA terminal. The display turns off to reduce battery consumption.1. m▶Setting▶Backlight/Illum.▶Backlight▶Lighting▶OFF▶Enter the time (seconds) for “Time to saver”. Lighting off/Power Saver Mode Making Display Easy to See OutdoorsIn order to see the display clearly in a bright surroundings such as outdoors, you can set “Outdoor mode”.1Press and hold 7 for at least one second.“” appears.To releasePerform the same operation.

33Basic Operation Making Display Hard to See from People AroundYou can set “View blind” to make it harder for the people around you to see the display from oblique angles.1Press and hold 8 for at least one second.“ ” appears on the Stand-by display.To releasePerform the same operation. Changing Font Size<Example> Changing the size of all the characters to “X-large”1m▶Setting▶Text display/input▶Font▶Character size▶X-large 󱛡Select “Separate setting” when you want to set the character size of each function separately. Changing Machi-chara SettingYou can change the Machi-chara image which appears to inform you of missed calls, new mail messages, new i-concier information and others.1m▶Setting▶Screen/Display▶Machi-chara setting▶Display setting▶ON▶Select a folder▶Highlight a Machi-chara image and press c(). Using Kisekae ToolYou can set the ring tone, Stand-by display, menu icons and others at a time.1m▶Setting▶Screen/Display▶Kisekae Tool setting▶Select a folder▶Highlight a Kisekae Tool ﬁ le and press c()▶YES 󱛡Some menu conﬁ gurations change according to the usage frequency depending on the type of the menu.1. m▶m( )▶Reset menu screen▶Enter your Terminal Security Code▶YESReset Menu Icons to Default Changing Illumination When Receiving<Example> Changing call Illumination for voice calls1m▶Setting▶Backlight/Illum.▶Illumination setting▶Illumination in call▶Illumination▶Phone※▶Select an illumination.※To set illumination such as for mail messages and videophone calls, select the corresponding menu.

34Basic Operation Switching to the eco ModeWith a single key press, you can set the eco Mode that reduces battery consumption. Changing to eco Mode affects items speciﬁ ed in “eco mode setting”, e.g. dimming the display.1Press and hold 5 for at least one second.“ ” appears.To releasePerform the same operation. eco Mode SettingYou can set the items for reducing battery consumption for when the eco Mode activates.1m▶Setting▶Battery▶eco mode setting▶Put a check mark for items to be set▶c( ) eco Mode AutostartThis setting ensures that the mode will be automatically set to the eco Mode when the remaining battery level has dropped to the set level or less.“Battery level” of “eco mode autostart” is set to “40%” in default. 󱛡When the “eco mode autostart” is set to “ON”, “ (gray)” will be displayed. When the mobile phone automatically switches to eco Mode, “ ” will be displayed and “ ” will be displayed on the desktop.1m▶Setting▶Battery▶eco mode autostart▶ON▶Set each item▶c( ) Lock/Security Various Security Codes ■Caution on security codes 󱛡You should avoid using the numbers for security codes such as denoting your birth date, part of your phone number, local address number, room number, “1111” or “1234” that is easily decoded by a third party. Also make sure that you take a note of the security codes you have set just in case you forget them. 󱛡Take care not to let others know your security codes. Even if your security codes are known and used by a third party, we at DOCOMO take no responsibility in any event for the resultant loss. 󱛡If you do not remember your respective security codes, you need to bring an identiﬁ cation card such as your driver’s license, the FOMA terminal and docomo mini UIM card to the handling counter of a docomo Shop.For details, contact “docomo Information Center” on the back page of this manual. 󱛡The PIN unblocking key (PUK) is described on the application form (your copy) that is handed over to you at a docomo Shop at the time of contract. If your contract has been made at a shop other than a docomo Shop, you need to bring an identiﬁ cation card such as your driver’s license, and the docomo mini UIM card to the handling counter of a docomo Shop, or consult “docomo Information Center” on the back page of this manual.

35Basic Operation“0000” at purchase Terminal Security CodeThis is a four-to-eight digit number for deleting all ﬁ les or changing settings. When the display for entering the Terminal Security Code appears, enter your four-to-eight digit code and press Oo( ).To change1. m▶Setting▶Lock/Security▶Change security codeDetermining at the time of contract Network Security CodeThis is a four-digit number required for your identiﬁ cation when you place an order at a docomo Shop, docomo Information Center, or “お客様サポート (User support)” site, or when you use respective network services. 󱛡“お客様サポート (User support)” is available in Japanese only.To changeFrom i-mode, you can change your Network Security Code by selecting “iMenu”→“お客様サポート (User support)”→“各種設定（確認・変更・利用） [Respective settings (Conﬁ rmation/Change/Use)]”→“ネットワーク暗証番号変更 (Change Network Security Code)”.“0000” at the time of your contract i-mode PasswordThis is a four-digit number required for registering/deleting My Menu, applying for/canceling Message Services or i-mode pay services, etc.To changeFrom i-mode, you can change your i-mode password by selecting “iMenu”→“English”→“Options”→“Change i-mode Password”.“0000” at the time of your contract PIN1 Code/ PIN2 CodeFor the docomo mini UIM card, you can set two security codes, namely the PIN1 code and PIN2 code.The PIN1 code is a four-to-eight digit number for checking the user each time the docomo mini UIM card is inserted into the FOMA terminal or each time the FOMA terminal is turned on, to prevent the unauthorized use by a third party.The PIN2 code is a four-to-eight digit number for executing Reset Total Charge, etc.When the PIN1 Code/PIN2 Code entry display appears, enter your four-to-eight digit PIN1 code/PIN2 code and press Oo(). 󱛡If you enter a wrong PIN1 code/PIN2 code three times in succession, the FOMA terminal locks and cannot be used.To change1. m▶Setting▶Lock/Security▶UIM setting▶Enter your Terminal Security Code▶Change PIN1 code or Change PIN2 code 󱛡You need to set “PIN1 code entry set” to “ON” to change the PIN1 code in advance.

36Basic OperationPIN Unblocking Key (PUK)The PIN unblocking key (PUK) is the eight-digit number for releasing the blocked PIN1 code and PIN2 code. You cannot change this code by yourself. 󱛡If you enter a wrong PIN unblocking key (PUK) 10 times in succession, the docomo mini UIM card is locked. In that case contact one of docomo Shops.PIN1 Code Entry SetYou can set the FOMA terminal not to work unless you enter your PIN1 code when turning on the power.1m▶Setting▶Lock/Security▶UIM setting▶Enter your Terminal Security Code▶PIN1 code entry set▶ON▶Enter the PIN1 code.To releaseSelect “OFF”.Various Lock FunctionsA variety of lock functions is installed on your FOMA terminal such as preventing illegal use of a third party, or protecting your private information.Dial Lock You can set your FOMA terminal not to be used by a third party. You can do no operations other than answering calls and turning on/off the power.1. m▶Setting▶Lock/Security▶Lock▶Enter your Terminal Security Code▶Dial lock 󱛡To release, enter your Terminal Security Code from the Stand-by display.Omakase LockWhen you have lost your FOMA terminal or in other cases, you can lock your personal data (such as Phonebook entries) by contacting DOCOMO ■Setting/Releasing Omakase Lock0120-524-360 (In Japanese only)Business hours: 24 hours (open all year round)※Unavailable from some IP phones. 󱛡You can set/release also from the My docomo site via your personal computer or other devices. (In Japanese only)

37Basic OperationOriginal LockYou can lock functions which utilize personal information such as Phonebook entries or schedule events.1. m▶Setting▶Lock/Security▶Lock▶Enter your Terminal Security Code▶Select a level for Original Lock. 󱛡To release, select “OFF”.Keypad LockKey operations are disabled.1. Press and hold Oo for at least one second. 󱛡To release, perform the same operation.Setting Incoming Call RestrictionYou can set whether to receive (accept) or not to receive (reject) incoming calls depending on the reason, such as from the parties which has not been registered in Phonebook or incoming calls from any parties who do not notify you of their phone numbers. There are three reasons for no caller ID; “User unset”, “Payphone”, and “Unknown”.1m▶Setting▶Lock/Security▶Call rejection set.▶Enter your Terminal Security Code▶Select an item to be set▶Accept or Reject 󱛡If you select “Accept” for “User unset”, “Payphone” or “Unknown”, you can set a ring tone or call receiving display.Resetting to DefaultResetting the Function Settings to DefaultYou can reset the items on “Function List”, which are indicated by . (See page 74) 󱛡The items indicated by might include the functions which do not return to their default settings or state.1m▶Setting▶Other setting▶Reset settings▶Enter your Terminal Security Code▶YESDeleting Stored Data at OnceYou can delete all the stored ﬁles together and each function setting will return to the default.1m▶Setting▶Other setting▶Initialize▶Enter your Terminal Security Code▶YES▶YES

38Connect Call Telephone Making a Call/Videophone CallMaking a Call by Entering the Phone Number1Enter a phone number starting with a city code▶Press d to make a call▶Press h to end the call. 󱛡Press c() to make a videophone call. 󱛡You can put a call on hold by pressing r during a call. You can release held call by pressing r. 󱛡This FOMA terminal has no inward-facing camera. Therefore, the image sent to the other party is a Chara-den image, still image, or image being shot by the outward-facing camera. Making a Call from Phonebook<Example> Search a Phonebook entry by the name stored in Phonebook1Zo▶Search name※▶Enter a part of the name▶Bo※You can use another search method such as “Search phone No.”, and “Search e-mail”. 󱛡If you enter nothing and press Bo; then you can display all Phonebook entries.2Select a Phonebook entry▶dWhen an entry contains multiple phone numbers, press No to select a desired phone number. 󱛡Press c() to make a videophone call. Making a Call with Dial/Received List1Co▶Select a call record▶d 󱛡Press c( ) to make a videophone call. Using Koe-no-TakuhaibinThis service keeps voice message on behalf of you. 󱛡For details, refer to the DOCOMO website.1Enter a phone number▶l( )▶Operate following the voice guidance. 󱛡Koe-no-Takuhaibin message can be sent from a Phonebook entry or Dial/Received List as well.When Koe-no-Takuhaibin message has been received, an SMS message is given as notice of recording. Select “再生 (Play)” on the detailed display of the SMS message to play back the received message. 󱛡You can also play back messages by following the operation below:“m▶TEL function▶Koe-no-Takuhaibin▶Message conﬁ rm(voice)”.Playing Back Messages

39Connect Making an International CallYou can use WORLD CALL to make an international call from Japan. 󱛡Contact “docomo Information Center” on the back page of this manual for inquiries about details on WORLD CALL. 󱛡When using international carriers other than DOCOMO, contact them.10 (for at least one second)▶Enter numbers in order of country code→area code (city code)→destination phone number. 󱛡You can enter “+” by pressing and holding 0 for at least one second. 󱛡When the area code (city code) begins with “0”, enter the area code without “0” at the beginning. However, include “0” when making a call to some countries or regions such as Italy.2d▶Dial 󱛡Press c() to make a videophone call. 󱛡DOCOMO videophones conform to “3G-324M standardized by the international standard 3GPP”. You cannot connect to the videophone using a different format. Receiving a Call/Videophone Call1A call comes in▶Press d to answer the call▶Press h to end the call.When a videophone call comes inYou can receive the videophone call the same way as with a voice call. The substitute image is sent to the other party. Adjusting Earpiece Volume1Press Bo to adjust the earpiece volume during a call. When You cannot Answer a Call Activate Record MessageYou can record a caller’s voice/video message when you cannot answer the call. 󱛡When a call comes in, an answer message is played back after the ring time elapses. Then, the caller’s voice is recorded with audio or video.1m▶TEL function▶Rec. msg./Voice memo▶Record message setting▶ON▶Phone※▶Select an answer message▶Enter a ring time (seconds).※To activate Record Message for videophone calls, select “Videophone”.

40Connect Using Public Mode (Drive Mode)Once you activate Public mode (Drive mode), the guidance is played back telling that you cannot answer the call as you are currently driving or in a public place (such as a train, bus or movie theater) where you should refrain from speaking on the phone. Then, the call is disconnected automatically.1Press and hold a for at least one second.“” appears on the Stand-by display.To deactivatePerform the same operation. 󱛡When a call comes in during Public mode (Drive mode), the ring tone does not sound and the record is stored in “Received calls”. The alarm does not sound even when the speciﬁ ed alarm time comes. Using Public Mode (Power Off)Once you activate Public mode (Power off), when the FOMA terminal’s power is OFF, the guidance is played back telling that you cannot answer the call as you are currently in a public place (such as a hospital, airplane or near a priority seat on a train) where you are required to turn off the power of the FOMA terminal. Then, the call is disconnected automatically.1Enter a25251▶dTo deactivate1. Enter a25250▶d Using Various Network Services ■Network services availableThe following are the DOCOMO network services available for the FOMA terminal.Service ApplicationMonthly feeVoice Mail Service Required ChargedMissed Call Notiﬁ cation ServiceNot requiredFreeCall Waiting Service Required ChargedCall Forwarding Service Required FreeNuisance Call Blocking ServiceNot requiredFreeCaller ID Notiﬁ cation ServiceNot requiredFreeCaller ID Display Request ServiceNot requiredFreeEnglish GuidanceNot requiredFreeMulti Number Required Charged2in1 Required ChargedPublic mode (Drive mode)Not requiredFreePublic mode (Power off)Not requiredFreeMelody Call Required ChargedKoe-no-TakuhaibinNot requiredFree 󱛡The network services are not available when you are out of the service area or out of reach of radio waves. 󱛡“Deactivate” does not mean that the contract for Voice Mail Service, Call Forwarding Service or other services is canceled. 󱛡The outlines of the each network service in this manual are described along with the menus of the FOMA terminal. For details on the network services, refer to DOCOMO website. 󱛡For subscriptions and inquiries, contact “docomo Information Center” on the back page of this manual.

41ConnectUsing Voice Mail Service1m▶TEL function▶Voice mail serviceTo activate the service1. Activate▶YES 󱛡You can also specify a ring time. To play back the message1. Play messages▶Play (voice call) or Play (videophone)▶YES▶Operate following the voice guidance.Using Call Waiting Service1m▶TEL function▶Other network serv.▶Call waitingTo activate the service1. Activate▶YESPress d. Each time you press d, you can switch the parties you can talk with.Answer an Incoming Call during a CallUsing Call Forwarding Service1m▶TEL function▶Other network serv.▶Call forwardingTo activate the service1. Activate▶Activate▶YES 󱛡You can set the phone number of forwarding destination or ring time as well.

42ConnectEmergency CallEmergency Calls Phone numberCalls to police 110Calls to ﬁre station and ambulance 119Calls for accidents at sea 118 󱛡This FOMA terminal supports “Emergency Location Report”. When you make an emergency call such as at 110/119/118, information about the place where you are dialing from (location information) is automatically notiﬁed to emergency-response agencies such as police stations. It might happen that your correct location is not detected by emergency-response agencies depending on the location you dial from or radio wave conditions. When you do not notify your phone number such as by adding “184” by every call, your location information and phone number are not notiﬁed. However, when an emergency-response agency has judged that the location information and phone number should be detected because of emergency priority such as for protection of human life, it might get location information and phone number regardless of your setting. Areas and timing “Emergency Location Report” introduced vary depending on the preparation of respective emergency-response agencies. 󱛡When you make a call at 110/119/118 from the FOMA terminal, tell an operator that you are calling from a mobile phone and let them know your phone number, and then clearly tell where you are currently around, so that police/ﬁre station can make a conﬁrmation call to your mobile phone. In addition, stay at the current location while talking preventing the call from being disconnected. Do not turn off the power immediately, and make sure to place your phone standby for at least 10 minutes after the call. 󱛡You might not be connected to regional police/ﬁre station depending on the area where you are calling from. 󱛡When using the videophone function of the FOMA terminal to place an emergency call to 110, 119 or 118, the call will automatically be made as a voice call.Using OverseasInternational Roaming (WORLD WING) is a service that allows you to use the FOMA terminal with the phone number and mail address you use in Japan, in a service area of the overseas carrier partnered with DOCOMO. It enables you to continue using the voice call, SMS and i-mode mail settings without having to make any changes. 󱛡Concerning the areas where the service is supported: This FOMA terminal is the class 2. This FOMA terminal is available within the service area of 3G network, and in the countries/regions supporting 3G 850MHz. Check the areas where you can use the service. 󱛡Refer to the following before you use this FOMA terminal overseas:・ “Mobile Phone User’s Guide [International Services]”・ DOCOMO International Services website 󱛡For the country codes, international call access codes, international preﬁx numbers for the universal number, and connectable countries, regions, and overseas carriers, refer to “Mobile Phone User’s Guide [International Services]” or the DOCOMO International Services website. 󱛡A fee charged for overseas use (call fee, packet communication fee) differs from that of in Japan.

43ConnectAvailable Service OverseasMajor Communication Service 3GVoice call※1○Videophone call※1○SMS※2○i-mode※3○i-mode mail ○i-channel※3※4○i-concier※5○i-Widget※6○Packet communication by connecting with a personal computer ○○: Available※1 When using 2in1, you cannot make calls using your B number. When using Multi Number, you cannot make calls using an additional number.※2 If the destination is a FOMA terminal, enter the other party’s phone number as you do in Japan.※3 You need to establish i-mode International Settings.※4 You need to establish i-channel International Settings. You are charged a packet communication fee for automatically updating the “ベーシックチャネル (Basic channel)” information as well (which, in Japan, is included in the i-channel fee).※5 You need to establish i-concier International Settings. You are charged a packet communication fee for each information you receive.※6 You need to establish i-Widget International Settings. When you show an i-Widget display, multiple Widget Appli programs might start communication. In that case, you are charged a packet communication fee for each communication. 󱛡Some services are not available depending on the overseas carrier or network.Making a Call to Outside the Country You Stay in10 (for at least one second)▶Enter numbers in order of country code→area code (city code)→destination phone number. 󱛡You can enter “+” by pressing and holding 0 for at least one second. 󱛡Enter “81” as a country code when you make an international call to Japan. 󱛡When the area code (city code) begins with “0”, enter the area code without “0” at the beginning. However, include “0” when making a call to some countries or regions such as Italy.2Press d to make a call. 󱛡Press c() to make a videophone call.Making a Call in Country You Stay1Enter a phone number▶Press d to make a call. 󱛡Press c( ) to make a videophone call.Making a Call to WORLD WING User OverseasWhen you make a call to a person who is also internationally roaming, make the call the same way as to make international calls to Japan even if he/she is in the country you stay at.

44Connect Mail Sending i-mode MailOnce you subscribe to i-mode, you can exchange e-mail messages over the Internet. You can attach within 2 Mbyte of up to 10 ﬁ les (photos, moving pictures, etc.) with body text added. For details on i-mode mail, refer to DOCOMO website.1l▶l( )▶Enter each item.Enter a destination (mail address).Enter a subject.Enter text.Select a ﬁ le such as an image.2Press c( ). Sending Deco-mailYou can change the color or size of characters or background color, or insert images or Deco-mail pictograms.1l▶l( )※▶Enter an address and subject.※You can also select “Decome-Template” to create Deco-mail.2Select the text ﬁ eld▶d▶Select one of decorations from the palette▶Enter text▶Oo( ) 󱛡When the text ﬁ eld is selected, the prediction conversion candidates appear. Press r to close the conversion candidate display, and then press d to display the palette. (In Japanese mode only) Palette3Press c( ).

45Connect Sending Decome-AnimeYou can create impressive messages by inserting text or images into a Flash ﬁ le.1l▶Create new Deco-Anime▶Enter an address and subject.2Select the text ﬁ eld▶Highlight a Decome-Anime template and press c()▶Edit characters and images▶c( )3Press c( ). Displaying Received i-mode Mail1l▶Inbox▶Select a folder▶Select an i-mode mail message. Replying to i-mode Mail1Press c( ) while an i-mode mail is displayed▶Enter each item▶c( )1. m() while an i-mode mail is displayed▶Reply/Forward▶Forward▶Enter each item▶c( ) Forwarding i-mode Mail Checking New i-mode MailYou can check the i-mode Center for a new mail message or Message R/F.1Press and hold l for at least one second. Sorting i-mode MailYou can use “Auto-sort” to sort received/sent i-mode mail messages into a folder such as “Business” or “Friend” which has been created in advance.<Example> Sorting mail messages, which come from the address stored in the Phonebook, into a folder1Highlight a folder from Inbox Folder list and press m()▶Auto-sort▶Address sort▶Look-up address▶Phonebook▶Look up for Phonebook entries and select a target i-mode mail address.

46Connect Early Warning “ Area Mail”Receiving Area MailYou can receive information such as about earthquake alerts that are issued from the Japan Meteorological Agency as an Area Mail message. When an Area Mail message arrives, “ ” lights and the buzzer or ring tone for Area Mail sounds.The received contents of some messages are automatically displayed. To erase the displayed content, select “OK”. 󱛡You can receive Area Mail messages even when you are not contracted to use i-mode. 󱛡You can receive Earthquake Early Warnings, Disaster/Evacuation information or Tsunami Warnings at the purchase.(Tsunami Warnings are received as Disaster/Evacuation information.)Setting Area Mail1l▶Mail setting▶Area Mail setting▶Select an item to be set▶Set each setting. 󱛡You can also check “Check ring tone” for how your FOMA terminal works when you receive an Area Mail message. Using SMSYou can send text messages to the mobile phone number at the other party. Sending SMS1l▶Compose new SMS▶Enter each item.Enter a phone number.Enter text.2Press c( ). Displaying Received SMS Message1l▶Inbox▶Select a folder▶Select an SMS message.

47Connect Phonebook Storing Phonebook EntriesStoring New Phone Numbers/Mail Addresses, etc.You can store Phonebook entries in the FOMA terminal (Phone) or on the docomo mini UIM card.1Zo (for at least one second)▶PhoneThe display for entering a name appears. Enter a name and proceed.When storing entries onto the docomo mini UIM card PhonebookSelect “UIM”.2Enter each item.Enter a name.Enter a reading.Enter a phone number.Enter a mail address.3Press c( ).Storing Phonebook Entries from Dial/Received List1Co▶Highlight a call record and press m()▶Add to phonebook▶Phone▶New▶Enter each item▶c( ) Editing Phonebook Entries1Zo▶Search and select a Phonebook entry▶m( )▶Edit phonebook▶Select an item to be edited▶Edit the contents▶c( )▶YES Deleting Phonebook Entries1Zo▶Search and select a Phonebook entry▶m( )▶Delete data▶Delete this▶YES

48Search i-mode/Full Browser Displaying i-mode Sitesi-mode is a service that enables you, by using the display of the mobile phone supporting i-mode, to use online services such as site access, Internet access, and i-mode mail. 󱛡i-mode is a pay service that is available on a subscription basis. 󱛡For details on i-mode, refer to DOCOMO website. 󱛡You can display SSL/TLS※-compatible pages via FOMA terminal.※SSL/TLS are the safer data communication systems using authentication/encryption technology to protect your privacy.1Press i.You can access the iMenu. Repeat selecting items (links) to display the desired site. 󱛡While you are online, “ ” blinks. 󱛡iMenu is available in English. Select “English” from the display on the right. ■Before using i-mode 󱛡Content of sites or websites is in general protected by copyrights law. You can use data such as text and images for your entertainment, which you download to your mobile phone supporting i-mode, but you cannot use them, part or whole of it as is, or modify them for the purpose of sale or redistribution, without approval from copyright holders. 󱛡If you replace the docomo mini UIM card with another one or turn on the power without docomo mini UIM card, you cannot display/play back ﬁ les, such as still images/moving pictures/melodies you download from sites, attached ﬁ les (still images/moving pictures/melodies and other ﬁ les) sent/received by mail, Screen Memo, and Messages R/F. 󱛡When the ﬁ le has been set for the Stand-by display or for speciﬁ ed ring tone, of which display or playback is restricted by the docomo mini UIM card, the settings return to default if you replace it with new one or turn on the power without docomo mini UIM card.

49Search Displaying Websites Designed for PCYou can browse Internet websites designed for PCs using the Full Browser function. 󱛡Note that you are charged a high communication fee for the massive data communication such as browsing Internet websites having many images or downloading data. For details on the packet communication fee, refer to DOCOMO website. 󱛡You can browse Internet websites composed of frames. You can select a frame to display it as well.1m▶imode/web▶Full Browser Home 󱛡By default, a conﬁ rmation display appears asking whether you want to use Full Browser. 󱛡You might not correctly display some Internet websites.Switching BrowsersYou can switch to Full Browser to show the Internet websites incorrectly displayed by i-mode. 󱛡The billing system differs between i-mode and Full Browser. With the latter, as packet communications fee will be a large sum, you are advised to use i-mode packet ﬂ at-rate service.1m( ) while the website is displayed by i-mode▶Full Browser▶Switch to FB▶YESTo switch from Full Browser to i-mode1. m() while the website is displayed by Full Browser▶imode Browser▶Switch to imodeViewing and Operating SitesScroll display/Move highlighted/Move the pointer: MoSelect an item (link): Oo()Return to previous page: l()Forward to next page: i()“ ” or “ ” appears while accessing by Full Browser. Pointer

50Search Storing Frequently Accessed SitesBookmark websites or i-mode sites you frequently visit to get them displayed easily.1m( ) while the site is displayed▶Bookmark▶Add bookmark▶OK▶Select a destination folder.To access a site stored in Bookmark1. m▶imode/web▶Bookmark▶Select a folder▶Select a bookmark. Saving Site ContentsIf you save the page once you visited as a screen memo, you can easily refer to it without connecting to i-mode.1m( ) while the site is displayed▶Screen Memo▶Save screen memo▶Phone▶YESTo display a saved screen memo1. m▶imode/web▶Screen Memo▶Phone or microSD▶Select a screen memo. 󱛡Depending on the site, for instance, when saving of screen memos is disabled at the site, you may not be able to save screen memos properly. i-channelThis service distributes information such as news and weather forecast to i-channel mobile phones. The automatically received latest information ﬂ ows on the Stand-by display by tickers. You can read it on the i-channel list by pressing *r.Further, two types of channels, “ベーシックチャネル (Basic channel)” provided by DOCOMO and “おこのみチャネル (Optional channel)” provided by IPs (Information Providers) are available. You are not charged a packet communication fee for auto-updates of “ベーシックチャネル (Basic channel)” information.You are charged a packet communication fee for auto-updates of “おこのみチャネル (Optional channel)” information that will be available by registering your favorite channels. Note that you are charged separately a packet communication fee for browsing detailed information for both “ベーシックチャネル (Basic channel)” and “おこのみチャネル (Optional channel)”.When you use the international roaming service, you are charged a packet communication fee for both auto-update and browsing detailed information. 󱛡i-channel is a pay service which is available on a subscription basis (You need to subscribe to i-mode to apply for i-channel). 󱛡For details on i-channel, refer to DOCOMO website. 󱛡The i-channel service is provided in Japanese only.Displaying i-channel1Press r.Select each channel to browse its detailed information.

51Enjoy CameraViewing and Operation of Finder DisplayFor Digicam mode❶❸❹❺ ❻❷❷❶MENUYou can check the settings.❷Key operation guidance❸Focus frameWhen a subject is focused on, the frame becomes green.❹Zoom barThe zooming status is displayed.❺ The setting of Image stabilizer❻ The number of remaining recordable still imagesOperations for shootingShoot/Save still image: OoFocus function: XoZoom: Vo(TELE)/Co(WIDE) 󱛡You may not be able to zoom depending on the selected image size.Shooting Still Images/Moving Pictures Shooting Still Images1m▶CAMERA/TV/MUSIC▶Camera▶Digicam mode2Oo( )▶Oo( ) Shooting Moving Pictures1m▶CAMERA/TV/MUSIC▶Camera▶Movie mode2Press Oo( ) to start recording ▶Press Oo( ) to end the recording▶Oo( ) 󱛡Do not leave the FOMA terminal with the lens pointing to direct sunlight. Pixels may be discolored or burns may result. 󱛡When the battery level is low, you may not be able to save still images/moving pictures you shoot.

52Enjoy Viewing Still Images/Moving Pictures after ShootingYou can display the still image or the moving picture you have shot in Picture Album. You can detect a person’s face on the still image you have shot and expand it. You can also play expressive slide shows with the effect function.1m▶Data box▶My picture or imotion/Movie▶Picture album 󱛡Picture Album is also activated by pressing l( ) from the Finder display.2Select a folder▶Select a ﬁ le. 󱛡To play a moving picture, press Oo( ).Shooting in Various Ways Continuous Shooting Still ImagesYou can continuously shoot still images within the sizes from WQVGA (240 x 428) to VGA (480 x 640).1m( ) from the Finder display for Digicam Mode▶Burst Shoot▶Continuous2Press Oo( )▶Highlight a still image and press Oo( ). 󱛡You can save all the shot images by pressing c( ). Shooting Still Images Using Auto Timer1m( ) from the Finder display for Digicam Mode▶Auto timer▶10 seconds or 2 seconds2Press Oo( ).The still image is shot after 2 seconds or 10 seconds.3Press Oo( ).When shooting moving pictures using Auto timer1. m() from the Finder display for Movie Mode▶Auto timer▶2Sec. or 10Sec.2. Press Oo( ).Recording is started after 2 seconds or 10 seconds.3. Press Oo( ) to end the recording ▶Oo( )

53Enjoy 1SegUsing 1Seg ■Using 1Seg1Seg is a service provided by television entrepreneurs (broadcasting stations). You are not charged a communication fee for receiving video and audio. For about fee charged by NHK, contact NHK.※You are charged a packet communication fee for browsing “Data broadcasting site” and “i-mode site”. You might be charged an information fee for using some sites (i-mode pay sites).※For details on the 1Seg service, browse the following websites: The Association for Promotion of Digital Broadcasting From personal computer: (http://www.dpa.or.jp/english/) From i-mode: (http://www.dpa.or.jp/1seg/k/) (In Japanese only) ■Broadcasting waves1Seg is one of the broadcasting services receiving radio waves (broadcasting waves) different from that used for the FOMA services. Reception condition might be deteriorated or you might not be able to receive 1Seg broadcast in places as follows: 󱛡Places far away from radio towers that transmit broadcasting waves 󱛡Mountain-ringed regions or behind buildings 󱛡In tunnels, underground, or recesses of buildings※Channels might be reorganized along with the discontinuation of analog broadcasting. For this reason, you might need to reset the channels by using an automatic scan (see page 54). After resetting the channels, be sure to register the channels to the channel list. For details about channel changes accompanying terrestrial digital broadcasting, check resources such as the following website:Ministry of Internal Affairs and Communications Television Receiver Support Center (Digital Support) Channel Changes Call Center (In Japanese only)Phone number： 0120-922-303Personal computer： (http://www.digisuppo.jp/repack/) ｉ-mode: (http://digisuppo.jp/m/index.php) ■Battery levelIf you try to start 1Seg when the battery is low, the battery alert tone sounds, and a conﬁ rmation display appears asking whether to start it. When you do nothing on the conﬁ rmation display for about one minute, 1Seg automatically terminates. ■Messages on the display when you use 1Seg for the ﬁ rst timeWhen you use 1Seg for the ﬁ rst time after purchase, the Exemption Clause Conﬁ rmation display appears.If you select “NO” on a conﬁ rmation display which appears after pressing *Oo(), the same conﬁ rmation display does not appear afterward.

54Enjoy Setting ChannelsWhen you activate 1Seg for the ﬁ rst time or change the area you are in, you need to operate “Channel setting”. Select “Auto channel setting” to enable you to search automatically for broadcast stations you can watch. 󱛡You need to set this function when you are in a terrestrial digital TV broadcasting service area.1m▶CAMERA/TV/MUSIC▶1Seg▶Channel setting▶Auto channel setting▶YES▶YES▶Enter a title.To execute Channel Setting by selecting an area1. m▶CAMERA/TV/MUSIC▶1Seg▶Channel setting▶Select area▶Select an area▶Select a prefecture▶YESWatching 1Seg1Press and hold c for at least one second.1Seg starts and the viewer display appears. Viewing and Operating Viewer Display❶❷❸❹ ❺ ❻ ❼❽❾󱀓 󱀔 󱀕 󱀖❶Video ❷Caption❸Data Broadcasting❹Program’s name❺Switch Visual Image/Caption❻ Displayed while you are watching a 1Seg program❼Video being recorded❽Operation Mode： Video Mode：Data Broadcasting Mode❾ Displayed while setting 1Seg Op-free Auto OffStarts ﬂ ashing approximately one minute before automatic termination.󱀓 Channel (Remote-control number)When a broadcasting station is broadcasting multiple services (programs), “Viewing service number/Number of all services” is also displayed.󱀔 Airwave Reception Level (estimate) Strong Weak“” appears out of the broadcasting area.󱀕 Displayed while receiving caption information󱀖Sound Volume

55EnjoyThe operation on the viewer displayChannel switch: No Sound volume adjustment: BoMute/Unmute: r Switch TV/data BC: l Video recording: O o() (for at least one second) or x (for at least one second) 󱛡The recorded video is saved on the microSD card.Setting Timer Watching or Recording 1SegSet the date and time, a channel, and program name, and enter them to the TV Timer List or Timer Recording List. When the set time arrives, you can start watching or recording. 1m▶CAMERA/TV/MUSIC▶1Seg▶TV timer list or Timer recording list▶c( )▶Enter each item▶c( )Playing Recorded Video1m▶Data box▶1Seg▶Video▶Select a ﬁ le. Music Saving WMA FileYou can save Windows Media® Audio (WMA) ﬁ les from a personal computer to the microSD card. 󱛡For details on MUSIC Player, refer to DOCOMO website.1Connect the personal computer and the FOMA terminal by using the FOMA USB Cable with Charge Function 02 (option).2m▶Setting▶External connection▶USB mode▶MTP mode3Start Windows Media Player 10/11/12 and save WMA ﬁ les to the microSD card.

56Enjoy 󱛡You cannot save WMA ﬁ les to the FOMA terminal. A license protected WMA ﬁ le cannot be saved to the FOMA terminal or the microSD card. 󱛡For how to operate Windows Media Player 10/11/12, refer to Help for Windows Media Player 10/11/12. 󱛡When you ﬁ nish saving, remove the FOMA USB Cable with Charge Function 02 from the FOMA terminal. 󱛡When you remove the FOMA USB Cable with Charge Function 02, remove it after ﬁ nishing the software in use. ■Handling music ﬁ lesYou can use music ﬁ les saved on the microSD card for personal use only. Before using, give enough consideration not to infringe on the third party’s intellectual property rights or other rights such as copyright. Playing Music FilesMUSIC Player enables you to play Chaku-uta Full® music ﬁ les you have downloaded from sites, or to play WMA ﬁ les you saved on the microSD card using your personal computer. 󱛡“Chaku-uta Full” is a registered trademark of Sony Music Entertainment Inc.1m▶CAMERA/TV/MUSIC▶MUSIC Player▶All music▶Select a music ﬁ le. Operations of MUSIC Player displayHalt: c() Pause: Oo()Search (fast forward): Press and hold VoSearch (fast rewind): Press and hold CoSound volume adjustment: BoReplay next ﬁ le: VoReplay previous ﬁ le: Co (When playback time is over three seconds, you go back to the beginning of the ﬁ le.)

57Enjoyi-αppli/i-Widgeti-αppli is a software program for mobile phone supporting i-mode. By downloading various software programs from the i-mode site, you can use your FOMA terminal more conveniently. You can automatically update the stock price information or weather information, and enjoy games without accessing network.i-Widget is a useful function for gaining easy access to frequently used contents and tools (Widget Appli programs) such as the calculator, clock, memo pad and stock market information. Widget Appli programs can be added by downloading them from the web site. 󱛡Depending on the i-αppli program, you might be charged a communication fee for using. 󱛡The packet communication fee for overseas use differs from the one for domestic use. 󱛡A multiple number of Widget Appli programs may start communicating when you open the i-Widget display. If you browse detailed information, you are charged separately a packet communication fee. 󱛡For details on i-αppli/i-Widget, refer to DOCOMO website.Starting i-αppli1i (for at least one second)▶Select a software program.Starting Widget Appli1Xo (for at least one second)▶Select a Widget Appli program.You can operate Widget Appli program separately.Downloading i-αppli from Sites1Select a software program from a downloadable site▶Select “OK” when downloading ends▶YES 󱛡You can delete the pre-installed i-αppli programs. You can re-download deleted programs from the “P-SQUARE” site. You can download not only i-αppli programs but also the pre-installed Deco-mail pictograms, Kisekae Tool ﬁles, Machi-chara images, Chara-den images, templates, dictionaries, and Content packages from the “P-SQUARE” site (in Japanese only). iMenu→メニューリスト (Menu List)→ケータイ電話メーカー (Mobile Phone Maker)→P-SQUARE 󱛡Deadlines for re-download services・“リバーシ (REVERSI)”: the end of September, 2017・“ハイパー四川省 (Hyper Sichuan)”: the end of September, 2017 󱛡The re-download services may be halted or closed without notice even in the service period.

58Enjoyi-motioni-motion is a ﬁle consisting from video, audio, and music which you can download to your FOMA terminal from i-motion sites that support i-motion. You can also set it for a ring tone. 󱛡When downloading or streaming an i-motion ﬁle, you might receive a bulky ﬁle. When data size required for sending or receiving is bulky, packet communications fees will be a large sum. You are advised to use i-mode packet ﬂat-rate service. 󱛡Two types of i-motion ﬁles, streaming type and normal type are available.Categories DescriptionStreaming type (cannot be saved)Plays data while receiving. Normal type (can be saved)When download is completed, the Download Completion display appears. You can then play or save data.Downloading i-motion1Select an i-motion ﬁle from a downloadable site▶Save▶YES▶Select a destination folder.Playing i-motion1m▶Data box▶imotion/Movie▶Select a folder▶Select a ﬁle.

59More Convenient i-concieri-concier works to serve you with a pleasant life just like a clerk or concierge does. The service holds your data (area information about your neighborhood, Memo, Schedule, ToruCa, Phonebook, etc.) and sends you information, with good timing, about a variety of things according to the contents of your memo and your schedule event, your living area, your current location, or your preference or taste. This service provides related information about Memos, schedule events, or ToDo items, and automatically updates schedule events or ToruCa ﬁ les to the latest, and also automatically adds useful information such as about the opening hours of various shops to your Phonebook. It also allows you to share the schedules or images held by the DOCOMO’s Data Storage Center with friends, family members or other groups. It also enables you to easily print out the images held. i-concier information is notiﬁ ed by a Machi-chara image (cartoon character that appears on the Stand-by display). 󱛡For details on i-concier, refer to DOCOMO website. 󱛡i-concier is a pay service which is available on a subscription basis (You need to subscribe to i-mode to apply for i-concier). 󱛡If you have not subscribed to Data Security Service but will newly subscribe to i-concier, you are to subscribe to Data Security Service as well as i-concier. 󱛡Depending on the content (information, i-schedule, and others), you might be charged separately an information fee other than the i-concier monthly fee. 󱛡You are charged a packet communication fee separately for receiving information except some. 󱛡You are charged separately a packet communication fee for using detailed information. 󱛡You are charged separately a packet communication fee for auto-updates of i-schedule, Memo, ToruCa, and Phonebook, etc. 󱛡i-concier is available in Japanese only.Receiving Information1When information arrives, blinks and the content is displayed on the Stand-by display▶Select a message▶Select a piece of information.Displaying i-concier1m▶i-concier▶インフォメーション一覧(Information list)▶Select a piece of information. Convenient Tools Using Shabette-KensakuYou can execute i-mode search by voice. 󱛡The ﬁ rst time you use this function, select “Use” on the usage information display. 󱛡You are charged separately a packet communication fee. 󱛡This function recognizes only Japanese word.1m▶Tool▶Shabette-Kensaku▶Within 10 seconds after the vibration begins, speak into the microphone, and then press Oo( ). 󱛡Even if you do not press Oo( ), your voice input is accepted automatically within about 3 seconds after you ﬁ nish speaking.

60More Convenient Using Start by VoiceYou can call up the function by voice.This function is available in Japanese mode only. 󱛡The ﬁ rst time you use this function, select “利用する (Use)” on the usage information display, or press c().1d (for at least one second)▶When “それではどうぞ ★★音声受付中★★ (Please ★★Voice is being accepted.★★)” is displayed, pronounce the function into the microphone within 10 seconds. 󱛡When the function to be called up cannot be speciﬁ ed, you can look it up in “使いかたガイド (Guide)”. ■Note when using Shabette-Kensaku or Start by Voice 󱛡Speak as clearly as possible, in natural conversation speed. 󱛡Speak in quiet, noise-free locations. 󱛡Recognition result may differ depending on pronunciation and the surrounding environment. Using Schedule1m▶Tool▶ScheduleSelect a date to show a schedule event of the selected date. Select the schedule event to conﬁ rm its details.2m( )▶New▶Enter each item▶c( ) Using Alarm1m▶Tool▶Alarm▶Highlight an alarm and press c()▶Enter each item▶c( ) 󱛡The alarm does not sound in Public mode (Drive mode), Dial Lock, “Alarm” locked in Original Lock or Omakase Lock.

61More Convenient Using Bar Code ReaderYou can use the camera to scan QR codes and others, and store them as ﬁ les.From the scanned data, you can make calls, compose i-mode mail messages, access Internet websites, and so on. ■When scanning with Bar Code Reader 󱛡Scan the code as large as possible within the guide frame. 󱛡Autofocus works when you scan the code about 10 cm or more away from it.When you scan the code in the out-of-focus state, the recognition rate lowers. 󱛡Hold the camera in parallel with the code when you scan. ■ QR codeQR code is one of the two-dimensional codes that denotes data in the vertical and horizontal directions. 󱛡“株式会社NTTドコモ (NTT DOCOMO, INC.)” is displayed when you scan the QR code with the FOMA terminal.Scan a Code<Example> Access P-SQUARE by using QR code on the right1m▶Tool▶Bar code reader▶Scan code▶Fit a code to the guide frame and press Xo to focus▶Press Oo( ) to scan the code.A URL is displayed as a scanned result.2Select the URL▶i-mode BrowserGuide frameQR code for accessing the site

62More ConvenientBluetooth FunctionYou can connect your FOMA terminal to a Bluetooth device, and can talk on the phone or play music ﬁles. Registering a Bluetooth Device to FOMA TerminalYou can search and register a Bluetooth device to the FOMA terminal. You need to place the Bluetooth device to be registered standby for registration beforehand.<Example> Register Wireless Earphone Set 02 and connect using the Hands-free service1m▶Tool▶Bluetooth▶Register New Devices2Select “OK”.3Select Wireless Earphone Set 02 ▶Select “YES”. 󱛡When you register a Bluetooth device other than Wireless Earphone Set 02, you need to enter “Bluetooth passkey”.4Select “Hands-free”.Select “Headset” or “Hands-free” for talking, and select “Audio streaming” for playing music.Connecting with Bluetooth Devices1m▶Tool▶Bluetooth▶Device list2Select a Bluetooth device ▶Select a service to be used.

63More ConvenientData ManagementUsing microSD CardIf you do not have a microSD card, you need to purchase it. 󱛡P-01F supports a commercial microSD card of up to 2 Gbyte and microSDHC card of up to 32 Gbyte (As of September 2013). For the latest operation, check information such as the memory capacity and manufacturers of microSD cards, access the following sites (in Japanese only). For the microSD cards other than published in the sites, contact each microSD card maker.・From i-mode to P-SQUARE (As of September 2013)iMenu→メニューリスト (Menu List) →ケータイ電話メーカー (Mobile Phone Maker) →P-SQUARE・From personal computers(http://panasonic.jp/mobile/)Note that the published information is the result obtained from the operation check, which does not necessarily guarantee all performances of those microSD cards. 󱛡Make sure that you turn off the power, and then insert/remove the microSD card.Inserting/Removing microSD Card 󱛡The inserting slot of the microSD card is in the inside of the back cover. To insert it, remove the back cover, and then remove the battery pack.1With the metal terminal surface facing downward, make sure that the cut edge is positioned at right and then insert. 󱛡Push it until it clicks.When you remove the microSD cardPush the microSD card until it stops and remove it. 󱛡Note that the microSD card may pop out when you insert or remove it.

64More Convenient : A microSD card is inserted. : Data is being read/written.(Do not remove the microSD card nor turn off the FOMA terminal.) : The microSD card is write-protected. : The microSD card cannot be used.(Insert the microSD card again. If “ ” is still displayed, execute “Check microSD” or “microSD format”.)Icons on the Display Checking microSD CardCheck and repair a microSD card. 󱛡Depending on the condition of the microSD card, correctly repairing the card might not be possible, and data might be deleted or the card might be initialized.1m▶Tool▶microSD▶Refer microSD data▶m( )▶Check microSD▶YES Formatting microSD CardWhen you use the microSD card for the ﬁ rst time, you need to format (initialize) it. 󱛡Be sure to use P-01F for formatting. The microSD card formatted using other devices such as personal computers may not work properly. 󱛡Note that formatting deletes all content on the microSD card.1m▶Tool▶microSD▶Refer microSD data▶m( )▶microSD format▶Enter your Terminal Security Code▶YES Copying Data to microSD Card<Example> Copying a still image1m▶Data box▶My picture▶Select a folder▶Highlight a still image to be copied and press m()▶Copy to microSD▶Copy this▶Select a destination folder.

65More ConvenientCopying Data to FOMA Terminal<Example> Copying a still image1m▶Data box▶My picture▶l( )▶Select a folder▶Highlight a still image to be copied and press m()▶Copy to phone▶Copy this▶Select a destination folder.Displaying Data Stored on microSD Card<Example> Displaying a still image1m▶Data box▶My picture▶l( )▶Select a folder▶Select an image.The total memory and used memory (estimated) in the microSD card can be displayed.1. m▶Tool▶microSD▶Refer microSD data▶m( )▶microSD infoCheck Capacity of microSD Card Backing up Data to microSD CardYou can back up Phonebook entries, schedule events, mail messages, memos, bookmarks, and the settings on and information about your FOMA terminal collectively onto the microSD card. When restoring the backup data onto your FOMA terminal, they are collectively restored. 󱛡Backing up data from the FOMA terminal onto the microSD card is collectively applied to all data, so emptied ﬁ les in the FOMA terminal are also backed up on the microSD card. When you restore such data onto your FOMA terminal, emptied ﬁ les on the microSD card overwrite the data in the FOMA terminal created later. 1m▶Tool▶microSD▶Backup/Restore▶Backup to microSD▶Enter your Terminal Security Code▶YESTo restore backup data to FOMA terminal1. m▶Tool▶microSD▶Backup/Restore▶Restore to phone▶Enter your Terminal Security Code▶YES

66More ConvenientSending/Receiving Data by Infrared CommunicationYou can send or receive data such as Phonebook entries to or from a device supporting infrared communication function. 󱛡You cannot exchange data depending on the other party’s device or FOMA terminal.Within about 20 cmWithin ±15° from the centerInfrared data portSending Data 󱛡Set the receiving end terminal ﬁrst, and then start sending data within 60 seconds.1Submenu of the data to be sent ▶Send Ir data▶YES 󱛡Procedure for sending data might differ depending on the data.Receiving Data1m▶Tool▶Receive Ir data▶Receive▶YESConnecting to a PCYou can connect the FOMA terminal to a personal computer to exchange WMA ﬁles, images or other ﬁles stored on microSD card. You can also access the Internet to perform data communication.※You need the FOMA USB Cable with Charge Function 02 (option) or FOMA USB Cable (option).※To perform data communication, you need to install the “FOMA communication conﬁguration ﬁle” (driver). For details, refer to “Manual for PC Connection”. You can download the “FOMA communication conﬁguration ﬁle” and “Manual for PC Connection” from the DOCOMO website. (http://www.nttdocomo.co.jp/english/support/)DOCOMO Connection Manager“DOCOMO Connection Manager” is a software which comes in handy for DOCOMO’s data communication.It enables easy PC settings according with the terms and conditions of the user’s agreement.It also makes it possible to check the amount of the data communication and provides a rough estimate of the charges using the charge counter function. For details, refer to the DOCOMO website.(http://www.nttdocomo.co.jp/support/utilization/application/service/connection_manager/)(In Japanese only)

67OthersSupportTroubleshooting 󱛡First of all, check to see if you need to update the software program and then update it if necessary. See page 70 for how to update software programs. 󱛡When symptom persists even after you check the countermeasures for the problem you suffer, contact the “Repairs” counter listed on the back page of this manual or a repair counter speciﬁed by DOCOMO. The “Repairs” counter is available in Japanese only.Power sourceThe FOMA terminal does not turn on. …Make sure the battery pack is attached to the FOMA terminal correctly. (See page 20) …Make sure the battery is fully charged. (See page 21)ChargingCannot charge. (The Call/Charging indicator does not light, or it ﬂickers.) …Make sure the battery pack is attached to the FOMA terminal correctly. (See page 20) …Make sure the power plug of the adapter or cigarette lighter plug is securely inserted into the outlet or cigarette lighter socket. …Make sure the adapter and the FOMA terminal are connected correctly. (See page 21) …When you use an AC adapter (option), make sure its connector is ﬁrmly connected to the FOMA terminal or the provided desktop holder. (See page 21) …When you use the desktop holder, make sure the connector terminal of the FOMA terminal is not stained. If it is stained, wipe the terminal part with a dry cotton swab, etc. …If you talk on the phone, have communications, or operate other functions for a long time during battery charge, the temperature of the FOMA terminal may rise to ﬂicker the Call/Charging indicator. In that case, charge the battery after the FOMA terminal cools down. (See page 21) …If you are in a location other than the appropriate ambient temperature, charging may not be started or fully charged. In that case, charge the battery again under the appropriate ambient temperature. (See page 21)Operation of terminalWhile you operate the FOMA terminal or charge the battery, they get hot. …While operating or charging, or when you operate i-αppli programs, talk on the videophone, or watch 1Seg programs for a long time during battery charge, the FOMA terminal, battery pack, or adapter may become warm, but this does not adversely affect operation, so you can continue to use them.The usable time of the battery is short. …Make sure not to leave the FOMA terminal out-of-service-area for a long time. If your FOMA terminal is left out-of-service area, it searches for radio waves to establish communications, consuming more power. …The usable time of the battery pack varies depending on the usage environment or its remaining life. …Battery packs are consumables. The usable time slightly shortens each time you charge the battery. If the usable time becomes extremely short as compared with the default state even if fully charged, purchase the speciﬁed battery pack.The power of the FOMA terminal shuts down and restarts. …If the terminal of the battery pack is stained, the connection might deteriorate to shut down the power. Wipe the battery terminal with a dry cotton swab, etc.

68OthersPressing keys is disabled. …Make sure Dial Lock is deactivated. (See page 36) …Make sure Keypad Lock is deactivated. (See page 37) …Make sure Side Key Guard is set to “OFF”. The docomo mini UIM card is not recognized. …Make sure you insert the docomo mini UIM card in the correct direction. (See page 20)The clock does not show the correct time. …The clock may not show the correct time when the power has been kept on for a prolonged period of time. Check whether “Auto time adjust” and “Auto time difference” of “Set main time” have been set to “Auto” and then, move to a location with good signal reception, turn off the power of FOMA terminal and then back on.CallCannot make a call by pressing numeric keys. …Make sure Restrict Dialing is deactivated. …Make sure the lock for “Keypad dial” in Original Lock is released. (See page 37) …Make sure Dial Lock is deactivated. (See page 36) …Make sure Self Mode is deactivated.Cannot talk.(“ ” does not disappear even if you move to another place.You cannot make or receive a call, though the radio wave conditions are not bad.) …Turn off and on the FOMA terminal, or remove and attach/insert the battery pack or docomo mini UIM card. (See page 20, page 22) …Depending on the characteristics of the radio waves, you may not be able to make or receive a call even if the FOMA terminal is “within service area” or “ ” is displayed for a radio wave condition. Move to another place and redial. …Make sure the call restrictions such as Call Rejection, Call Acceptation, etc. are deactivated. …Depending on the radio wave congestion state, calls and mail messages may be congested and hard to be connected in crowded places. In that case, the message “Please wait” or “Please wait for a while” is displayed and a busy tone sounds. Move to another place or wait for a while, and then redial.CameraStill images and movies shot by the camera are blurred. …When you shoot a subject in a short distance, set Focus mode to “Macro”. …When you shoot portraits, set Focus mode to “FaceDetect”. …Set Stabilizer to “Auto” and then shoot. …Make sure the lens of the camera is not fogged or stained. Warranty and After-sales ServiceWarranty 󱛡Make sure that you have received a warranty card provided at purchase. After checking the contents of the warranty card as well as “Shop name and date of purchase”, keep the warranty card in a safe place. If you notice that necessary items of the warranty card are not ﬁ lled in, immediately contact the shop where you purchased the FOMA terminal from. The term of the warranty is one year from the date of purchase. 󱛡All or part of this product including the accessories may be modiﬁ ed for improvement without notice.After-sales Services◎ When there is a problem with the FOMA terminalBefore asking repairs, check “Troubleshooting” in this manual or in “使いかたガイド (Guide)” mounted on the FOMA terminal. (“使いかたガイド (Guide)” is available in Japanese mode only.) If the problem remains unsolved, contact the “Repairs” counter listed on the back page of this manual for malfunction and consult them.The “Repairs” counter is available in Japanese only.

69Others◎ When repairs are necessitated as a result of consultationBring your FOMA terminal to a repair counter speciﬁed by DOCOMO. Note that your FOMA terminal is accepted for repair during the repair counter’s business hours. Further, note that you may need to wait for ﬁxing depending on the malfunction state. ■In warranty period・ Your FOMA terminal is repaired charge free in accordance with the terms of warranty.・ Make sure that you bring the warranty card to the counter for repair. If you do not show the warranty card, or when troubles or malfunctions are regarded to be caused by your mishandling (the damages of liquid crystal, connector, etc.), the repair cost is charged even within the warranty period.・ The cost for troubles caused by the use of devices and consumables other than those speciﬁed by DOCOMO is charged even within the warranty period. ■Repairs may not be carried out in the following cases:・ When exposure to water is found at our repair counter (Example: When the moisture detection sticker has reacted)・ When, as a result of inspection at our repair center, corrosion is found due to exposure to water, dew condensation, or sweat, or when damage or deformation is found in the circuit board [Repairs might not be carried out when damage to the connector terminal (earphone/microphone terminal) or liquid crystal, or cracks in the body are found.]※Even if repair is feasible, the repair cost is charged when the trouble you suffer matches one of the symptoms listed above, which is not supported by the warranty. ■After the warranty periodWe will repair your FOMA terminal on request (charges will apply). ■Spare parts availability periodThe minimum storage period of the performance spare parts (parts required for maintaining performance) for the FOMA terminal is basically six years after the closure of its production. Note, however, that your FOMA terminal might not be repaired depending on the troubled portions because of the shortage of spare parts.◎Other points to note 󱛡Make sure not to modify the FOMA terminal or its accessories.・ We might reject to repair depending on the degrees of your modiﬁcation. The following might be regarded as modiﬁcations:・ To put stickers, etc. onto the liquid crystal or keys・ To decorate the FOMA terminal using adhesives・ To replace the coverings etc. with those of other than DOCOMO genuine products・ Repairs of troubles or malfunctions resulting from the modiﬁcations are charged even within the warranty period. 󱛡Do not peel the nameplate off the FOMA terminal. Note that when we cannot ensure the contents described on the nameplate and therefore cannot verify the product conformity to the technical standard, it might happen that we at DOCOMO reject to repair the malfunction. 󱛡The information such as about function settings, etc. might be reset depending on the troubles or repairs, or the way you handle the FOMA terminal. Set the settings again. 󱛡If the FOMA terminal is repaired, the Bluetooth Address may change, regardless of the area that was originally damaged. 󱛡The parts generating magnetism are used in the following portions of the FOMA terminal. Note that if you place a magnetism-sensitive object such as a cash card near the FOMA terminal, the card might become unusable. Portions: speaker, earpiece 󱛡This FOMA terminal comes with the waterproof performance, however, if the inside of the FOMA terminal gets wet or becomes moist, immediately turn off the power and remove the battery pack; then visit a repair counter. The FOMA terminal may not be repaired depending on the condition.

70OthersError Information Send SettingWhen an error occurs on the FOMA terminal, the error information is created automatically and send it to DOCOMO if this function is set to “ON”.1m▶Setting▶Other setting▶Error info send set.▶Enter your Terminal Security Code▶ON/OFFi-mode Fault Diagnosis SiteYou can check on your FOMA terminal whether sending/receiving mail messages, downloading images/melodies, and others are normally working. When you think your FOMA terminal is in trouble as a result of your check, contact the “Repairs” counter listed on the back page of this manual. The “Repairs” counter is available in Japanese only. 󱛡To connect to “ｉモード故障診断サイト (i-mode Fault Diagnosis Site)” [in Japanese only]i-mode site: iMenu→お客様サポート (User support)→お問い合わせ (Inquiries) →故障・電波状況お問い合わせ先 (Failures & Radio wave condition) →ｉモード故障診断 (i-mode Fault Diagnosis)QR code for accessing the site 󱛡When you use overseas, you are charged a fee.Updating SoftwareThis function is to check whether you need to update software programs in the FOMA terminal by connecting to the network, and if necessary, you can download some parts of software programs using packet communication, and can update the software programs. If you need to update the software programs, the DOCOMO website and “お客様サポート (User support)” in Japanese iMenu lets you know information about updating software programs. There are three kinds for updating software programs; “Auto-update”, “Update Now” and “Reserve Update”. 󱛡You can update software programs, with data retained, such as Phonebook entries, images shot by the camera, or downloaded data in the FOMA terminal; however note that data may not be protected depending on the conditions (such as malfunction, damage, or drench) your FOMA terminal is placed in. You are advised to back up important data. Note that data such as downloaded ones might not be backed up. ■Before using Software Update 󱛡Do not remove the battery pack while updating software programs. You may fail to update. 󱛡Fully charge the battery before updating software programs. 󱛡It may take time to update (download or rewrite) software programs. 󱛡You cannot make/receive calls, use communication functions, and other functions while updating software programs. (You can receive voice calls during download.)

71Others 󱛡You are advised to update software programs when radio wave is strong enough with the three antennas displayed and while you are not moving. If radio wave conditions get worse while downloading software programs, or download is suspended, move to a place with better radio wave conditions and try again to update software programs. 󱛡When updating software programs, the proprietary information about your FOMA terminal (model name or serial number, etc.) is automatically sent to the server (DOCOMO-managed server for Software Update). We at DOCOMO never use the sent information for purposes other than to update software programs. 󱛡If you fail to update software programs, “Rewrite failed” is displayed and you cannot do all operations. In that case, you are kindly requested to come to a repair counter speciﬁed by DOCOMO.Start Software Update from Icon1Select “Update notiﬁcation icon” on the Stand-by display.Update notiﬁcation iconCheck whether you need to update software programs.2When update is necessary, “Update is needed” is displayed. And you can select either “Now update” or “Reserve”. 󱛡When you select “Now update”, update immediately starts. 󱛡When rewriting is completed, your FOMA terminal automatically restarts and the Update Completion Conﬁrmation display appears. 󱛡When you select “Reserve”, you can select the date and time you want.Start Software Update from Menu1m▶Setting▶Other setting▶Software Update▶Enter your Terminal Security Code▶Update2Go to step 2 of “Start Software Update from Icon” on page 71.

72Others Scanning FunctionYou can detect data or application programs, which might cause troubles, from among those downloaded to your FOMA terminal, and then can delete the data or stop starting the application programs. 󱛡This scan function provides a certain protective measure to ﬁ lter out data that might cause troubles with your FOMA terminal at the time when you browse websites or receive messages. Note that when the virus pattern data supporting respective troubles is not yet downloaded to your FOMA terminal, or when no virus pattern data supporting them is found, this function does not prevent troubles from occurring. Updating pattern dataFirst of all, update the pattern data to obtain the latest.1. m▶Setting▶Lock/Security▶Scanning function▶Update▶YES▶YESDisplays for scanning results ■About the display for scanned problem elementsA warning display appears when problematic data is found. Press i() from the warning display to show the name of the problem element. 󱛡When six or more problem elements are found, the sixth and later problem element names are omitted. 󱛡“” might not appear depending on the detected problem element. ■The displays for scanning resultAlert level 0 Press Oo( ) to continue the operation.Alert level 1Press Oo( ) to stop and end the operation.Press c( ) to continue the operation.Alert level 2Press Oo( ) to stop and end the operation.Alert level 3Press c( ) to delete the data and end the operation.Press Oo( ) to stop and end the operation.Alert level 4Press Oo( ) to delete the data and end the operation. 󱛡The alert displays differ from shown above may appear.

73OthersOptions and Related DevicesCombining various options with the FOMA terminal, you can realize more versatile use from personal purpose to business purposes. Some products may not be dealt in depending on the area. For details, consult a handling counter such as a docomo Shop. For details on options, refer to the user’s manuals of respective options and related devices.・Battery Pack P23・Back Cover P61・Desktop Holder P54・FOMA AC Adapter 01/02※1・FOMA AC Adapter 01 for Global use※1・FOMA DC Adapter 01/02・FOMA Portable Charging Adapter 01/02/03・FOMA Dry Battery Adapter 01・FOMA eco Solar Panel 01・FOMA USB Cable with Charge Function 02※2・FOMA USB Cable※2・FOMA Indoor Booster Antenna※3・FOMA Indoor Booster Antenna (Stand Type)※3・Carry Case L 01・Carry Case 02・In-Car Holder 01※4・Earphone/Microphone 01・Stereo Earphone Set 01・Earphone/Microphone with Switch P001/P002※5・Flat-plug Earphone/Microphone with Switch P01/P02※6・Flat-plug Stereo Earphone Set P01※6・Earphone Plug Adapter P001※6・Earphone Plug Adapter for External connector terminal 01・Earphone Plug Adapter 01・Flat-plug Connector/Stereo Mini-jack Conversion Adapter P01※6・Bluetooth Headset F01※7・AC Adapter for Bluetooth Headset F01・Wireless Earphone Set P01・Wireless Earphone Set 02/03・Bone conduction microphone/receiver 01※6/02・In-Car Hands-Free Kit 01※8・FOMA In-Car Hands-Free Cable 01※1 See page 21 for charging batteries using AC adapter.※2 If you use a USB hub, outer devices may not work correctly.※3 Use it in Japan only.※4 If the connector terminal, etc. of the FOMA terminal comes into contact with the In-Car Holder, change the direction of the FOMA terminal or In-Car Holder. Then, install.※5 Earphone Plug Adapter P001 and Earphone Plug Adapter for External connector terminal 01 are required.※6 Earphone Plug Adapter for External connector terminal 01 is required.※7 AC Adapter for Bluetooth Headset F01 is required.※8 To charge the P-01F, FOMA In-Car Hands-Free Cable 01 is required.

74OthersAppendixFunction ListExecute “Resetting the Function Settings to Default” on page 37 for the items indicated by to return to the respective defaults.MailInboxOutboxDraftMail history boxCompose new messageCreate new Deco-AnimeDecome-TemplateDeco-mailDecome-AnimeCompose new SMSCheck mail/messageCheck new SMSReceive optionMail settingReceive settingDisplay settingText predictSignature settingPhrases/Store wordMail box lockSet check mail/messageBlog/Mail groupMailMail settingAddress/Spam Mail Set.Auto save settingSMS settingArea Mail settingAuto Deco-mail settingCheck settingsResetimode/webiMenu/SearchBookmarkScreen MemoBrowsing historyEnter URL Enter URLURL enter historyi-Channeli-Channel listTicker display settingReset i-Channelimode/web settingimode Browser Set.Full Browser SettingsCommon SettingsConﬁrm imode settingReset imode settingFull Browser HomeiαppliSoftware list (phone)iαppli (microSD)Software listiαppli dataiαppli call logsiαppliiαppli run infoEnd stand-by infoEnd Widget appli infoSecurity error historyAuto start infoTrace infoiαppli settingAuto-start settingDisp. software infoi-Widget overseas usei-Widget sound effecti-αppli call settingsiαppli volumePreferred toneαBacklightαPower saverαVibratorCheck settingsCAMERA/TV/MUSICCameraDigicam modePhoto modeMovie modePicture album1SegActivate 1SegProgram guideTV timer listTimer recording listRecording result

75OthersCAMERA/TV/MUSIC1SegTVlinkChannel listChannel settingUser settingMUSIC PlayerData boxMy pictureMUSICimotion/MovieMelodyContent packageMy documentKisekae ToolMachi-charaChara-den1SegImageVideoPosition memoryDocument viewerFontSD other ﬁlesSearch all historyToolBar code readerScan codeSaved dataCalculatorAlarmToolReceive Ir dataReceiveReceive allScheduleMemoData Security ServiceData check/DownloadUpdate phonebooksUpdate schedule etc.Update imagesUpdate setting infoSetting/HistorymicroSD Refer microSD dataBackup/RestoreGuideVoice recorderBluetoothDevice listRegister New DevicesBluetooth ON/Bluetooth OFFAccept registeredAccept dialup devicesBluetooth settingsVoice announceDictionary Enter wordReference historyPhrases/Store wordCommon phrasesStore wordDownload dictionaryVoice quick startToolShabette-KensakuToruCaToruCa settingsToruCa settingsReceive ToruCaContact DOCOMOTEL functionPhonebookSearch phonebookAdd to phonebookUIM operationPhonebook set./CheckForwarding imageRec. msg./Voice memoPlay/Delete msg.Play/Delete VP msg.Record voice memoRecord message settingDialed/Received callDialed callsReceived callsRedialDial/Receive settingNuis. call blockingCaller ID requestCaller ID notiﬁcationArrival call actDial call settingReceive call settingIn-call settingHeadset function set.Call rejection set.Missed call notice

76OthersTEL functionVideophone settingVisual preferenceSelect imageAuto redial as voiceNtfy switch-modeReject videophoneHands-free switchV.phone while packetCall duration/chargeCall duration/chargeNotify cost limitReset totalAuto resetDisaster Voice MessagingKoe-no-TakuhaibinMsg. conﬁrm/set(site)Message conﬁrm(voice)Settings(voice)2in1Melody callVoice mail service Play messagesActivateDeactivateSet ring timeCheck settingVoice mail settingCheck messagesMessage notiﬁcationDelete iconSetting for videophoneTEL functionOther network serv.Call forwardingCall waitingEnglish guidanceRemote accessMulti NumberAdditional serviceChoku-DenSettingScreen/DisplayKisekae Tool settingStand-by displayMyFACE setting Color theme settingEach display settingSub-display settingMachi-chara settingSoft keyMenu ThemeViewer settingsIconsIcons settingView blindImage display modeLCD AIMail ticker displayInformation displaySettingSound/Vib./MannerRing volumeSelect ring toneOther sound settingVibrator settingManner mode settingMachi-chara chat set.Backlight/Illum.BacklightIllumination settingText display/inputFontCharacter input setバイリンガルTimeSet main timeSub clock settingClock displayAuto power ONAuto power OFFLock/SecurityLockKeypad lockSecret modeSecret data only modeCall rejection set.Change security codeUIM settingScanning functionTimer lock ON at closeIncm. PH-book avail.

77OthersSettingBatteryeco modeeco mode settingeco mode autostartUse historyBattery levelExternal connectionUSB modeBluetoothHeadset microphoneFemtocellOther settingMultiOneTouch set.Side key guardCamera-button settingAlarm settingSelf modeReset settingsInitializeSoftware UpdateError info send set.Quick search URLMap/Overseasimadoco searchimadoco kantan searchimadoco searchi-areaOverseas NW searchNetwork search settingPLMN setting Display operator nameDisplay area statusRe-search icon set.Map/OverseasOverseas settingInquiries(overseas)Sub clock settingBar incoming when roamMissed call noticeRoaming guidanceInt’l dial assistanceimode service set.Mail/Message usage setNetwork servicei-concierProﬁleMultiOneTouchOthersCharacter input

78OthersMain Speciﬁcations ■HandsetModel P-01FDimensions (when closed) Height: Approx. 112 mmWidth: Approx. 51 mmDepth: Approx. 15.1 mmWeight (with the battery pack attached)Approx. 119 gContinuous standby time (FOMA/3G)Standstill: Approx. 610 hoursContinuous talk time (FOMA/3G)Voice call : Approx. 200 minutesVideophone call : Approx. 130 minutes1Seg watching time Approx. 350 minutesCharging time AC adapter: Approx. 120 minutesDC adapter: Approx. 120 minutesDisplay Type Display: TFT 262,144 colors Sub-display: Organic EL 1 colorSize Display: Approx. 3.4 inches Sub-display: Approx. 0.9 inchesNumber of pixels Display: 409,920 pixels (480 dots x 854 dots) Sub-display: 4,608 pixels (128 dots x 36 dots)Image pickup deviceType CMOSSize 1/4.0 inchesCamera Number of effective pixelsApprox. 5,100,000 pixelsNumber of recording pixels (maximum)Approx. 5,000,000 pixelsRecordingNumber of recordable still images※1Approx. 4,800 max. (default)Number of still images for continuous shootingFor Digicam Mode in Continuous setting VGA: 8 Square(S): 8 WQVGA: 8 For Photo Mode in Continuous setting (Continuous Mode) VGA: 4 QVGA: 5, 10 QCIF: 5, 10, 15, 20 Sub-QCIF: 5, 10, 15, 20Music playbackContinuous playback time※2SD-Audio ﬁle (supports Play Background):Approx. 6,500 minutes※3Chaku-uta Full® music ﬁle (supports Play Background): Approx. 6,000 minutes※3i-motion ﬁle (including Chaku-uta® music ﬁle): Approx. 1,260 minutes※3WMA ﬁle (supports Play Background): Approx. 4,600 minutesMemory capacityChaku-uta®Approx. 621 Mbyte (default)※4Chaku-uta Full®“Chaku-uta” is a registered trademark of Sony Music Entertainment Inc.※1 Picture size: VGA (480 x 640), Quality: Standard※2 The continuous playback time is the estimated duration that you can play back using the Stereo Earphone Set 01 (option) with the FOMA terminal closed.※3 File format: AAC※4 Shares with still images, i-motion ﬁles, melodies, PDF ﬁles, Kisekae Tool ﬁles, Machi-chara images, Content packages, Font, Screen memos, ToruCa ﬁles, and i-αppli programs.

79Others ■Battery packName of product Battery Pack P23Battery type Li-ion (lithium ion) batteryVoltage 3.7 VCapacity 800 mAh ■Speciﬁcations of shooting<Still image (Photo mode)>File format (Extension) JPEG (jpg)The number of ﬁles that can be saved to P-01FApprox. 4,800 max. ※1※2The number of ﬁles that can be saved to the microSD card (1 Gbyte)Approx. 10,244 max. ※2<Moving picture (Movie mode)>File format (Extension) MP4, ASF (3gp, asf)Recordable time to P-01FApprox. 30 seconds max. ※1※3Recordable time to the microSD card (1 Gbyte)Approx. 180 minutes max. ※4<Zoom>Still image (Photo mode)Level of zoom 21 levelsThe maximum magniﬁcationsApprox. 10.1 timesMoving picture (Movie mode)Level of zoom 21 levelsThe maximum magniﬁcationsApprox. 10.1 times※1 Default setting※2 The number of ﬁles that can be saved under the conditions of “Picture size: VGA (480 x 640), Quality: Standard.※3 Maximum recording duration per shot that can be saved to the main unit under the conditions of “Movie size: VGA (640 x 480), File size: Mail restriction (L), Quality: Standard, Movie type set: Normal”.※4 Maximum recording duration per shot that can be saved to the microSD card (1 Gbyte) under the conditions of “Movie size: VGA (640 x 480), File size: Long time, Quality: Standard, Movie type set: Normal”. ■Recordable time of 1SegMaximum (total) recordable time to the microSD card (1 Gbyte)Approx. 320 minutesMaximum (total) recordable time to the microSDHC card (32 Gbyte)Approx. 10,240 minutes 󱛡The maximum recordable time is the estimate for 224 kbps of video, 48 kbps of audio, and 52 kbps of data (including captions). The recordable time varies depending on the broadcasting station or program. 󱛡The maximum ﬁle size for continuous recording is up to 2 Gbyte under SD-VIDEO speciﬁcations. ■Number of savable/registerable items in FOMA terminalFunction Number of savable/ registerable itemsPhonebook 3,000Schedule 2,500 max. ※1Mail Received mail 2,500 max. ※1※2Sent mail 1,000 max. ※1Still image 7,000 max. ※1i-motion ﬁle 7,000 max. ※1Kisekae Tool 7,000 max. ※1i-αppli 100 max. ※1※1 The number of savable/registerable items may decrease depending on the data volume.※2 Includes pre-installed data.

80OthersSpeciﬁc Absorption Rate (SAR) of Mobile PhonesSAR Certiﬁcation InformationThis model P-01F mobile phone complies with Japanese technical regulations and international guidelines regarding exposure to radio waves.This mobile phone was designed in observance of Japanese technical regulations regarding exposure to radio waves* and limits to exposure to radio waves recommended by a set of equivalent international guidelines. This set of international guidelines was set out by the International Commission on Non-Ionizing Radiation Protection (ICNIRP), which is in collaboration with the World Health Organization (WHO), and the permissible limits include a substantial safety margin designed to assure the safety of all persons, regardless of age and health condition.The technical regulations and international guidelines set out limits for radio waves as the Speciﬁc Absorption Rate, or SAR, which is the value of absorbed energy in any 10 grams of tissue over a 6-minute period. The SAR limit for mobile phones is 2.0 W/kg. The highest SAR value for this mobile phone when tested for use at the ear is 0.739 W/kg. There may be slight differences between the SAR levels for each product, but they all satisfy the limit.The actual SAR of this mobile phone while operating can be well below that indicated above. This is due to automatic changes to the power level of the device to ensure it only uses the minimum required to reach the network. Therefore in general, the closer you are to a base station, the lower the power output of the device.This mobile phone can be used in positions other than against your ear. This mobile phone satisﬁes the international guidelines when used with a carrying case or a wearable accessory approved by NTT DOCOMO, INC.** In case you are not using the approved accessory, please use a product that does not contain any metals, and one that positions the mobile phone at least 1.5 cm away from your body.The World Health Organization has stated that “a large number of studies have been performed over the last two decades to assess whether mobile phones pose a potential health risk. To date, no adverse health effects have been established as being caused by mobile phone use.”Please refer to the WHO website if you would like more detailed information. (http://www.who.int/docstore/peh-emf/publications/facts_press/fact_english.htm)Please refer to the websites listed below if you would like more detailed information regarding SAR.Ministry of Internal Affairs and Communications Website: (http://www.tele.soumu.go.jp/e/sys/ele/index.htm)Association of Radio Industries and Businesses Website: (http://www.arib-emf.org/index02.html)(In Japanese only)NTT DOCOMO, INC. Website: (http://www.nttdocomo.co.jp/english/product/sar/)Panasonic Mobile Communications Co., Ltd. Website: (http://panasonic.jp/mobile/support/)(In Japanese only)* Technical regulations are deﬁned by the Ministerial Ordinance Related to Radio Law (Article 14-2 of Radio Equipment Regulations).** Regarding the method of measuring SAR when using mobile phones in positions other than against the ear, international standards (IEC62209-2) were set in March of 2010. On the other hand, technical regulation is currently being deliberated on by national council. (As of October, 2011)

81OthersEuropean RF Exposure InformationThis mobile phone complies with the EU requirements for exposure to radio waves. Your mobile phone is a radio transceiver, designed and manufactured not to exceed the SAR* limits** for exposure to radio-frequency (RF) energy, which SAR* value, when tested for compliance against the standard is 0.729 W/kg for head conﬁguration. While there may be differences between the SAR* levels of various phones and at various positions, they all meet*** the EU requirements for RF exposure.* The exposure standard for mobile phones employs a unit of measurement known as the Speciﬁc Absorption Rate, or SAR.** The SAR limit for mobile phones used by the public is 2.0 watts/kilogram (W/kg) averaged over ten grams of tissue, recommended by The Council of the European Union. The limit incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.*** Tests for SAR have been conducted using standard operating positions with the phone transmitting at its highest certiﬁed power level in all tested frequency bands. Although the SAR is determined at the highest certiﬁed power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a base station antenna, the lower the power output.Declaration of ConformityThe product “P-01F” is declared to conform with the essential requirements of European Union Directive 1999/5/EC Radio and Telecommunications Terminal Equipment Directive 3.1(a), 3.1(b) and 3.2. The Declaration of Conformity can be found on (http://panasonic.net/pmc/support/index.html).※The European RTTE approval of this product is limited to the use of the P-01F handset, Battery Pack and FOMA AC Adapter 01 for Global use (100 to 240 V AC) only. Other accessories are not part of the approval.FCC Notice󱛡This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation.󱛡Changes or modiﬁcations not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.FCC RF Exposure InformationThis model phone meets the U.S. government’s requirements for exposure to radio waves.Your wireless phone contains a radio transmitter and receiver. Your phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientiﬁc organizations through periodic and thorough evaluation of scientiﬁc studies.The exposure standard for wireless mobile phones employs a unit of measurement known as the Speciﬁc Absorption Rate (SAR).

82OthersThe SAR limit set by the FCC is 1.6 W/kg.* Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certiﬁed power level in all tested frequency bands. Although the SAR is determined at the highest certiﬁed power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the output.Before a phone model is available for sale to the public, it must be tested and certiﬁed to the FCC that it does not exceed the limit established by the U.S. government-adopted requirement for safe exposure. The tests are performed in various positions and locations (for example, at the ear and worn on the body) as required by FCC for each model. The highest SAR value for this model phone as reported to the FCC when tested for use at the ear is 0.700 W/kg, and when worn on the body in a holster or carry case, is 0.915 W/kg. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the U.S. government requirement.The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on ﬁle with the FCC and can be found under the Display Grant section at (http://www.fcc.gov/oet/ea/fccid/) after search on FCC ID UCE113059A.For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines. Please use an accessory designated for this product or an accessory which contains no metal and which positions the handset a minimum of 1.5 cm from the body.* In the United States, the SAR limit for wireless mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. SAR values may vary depending upon national reporting requirements and the network band.Important Safety InformationAircraftSwitch off your wireless device when boarding an aircraft or whenever you are instructed to do so by airline staff. If your device offers a ‘ﬂight mode’ or similar feature consult airline staff as to whether it can be used on board.DrivingFull attention should be given to driving at all times and local laws and regulations restricting the use of wireless devices while driving must be observed.HospitalsMobile phones should be switched off wherever you are requested to do so in hospitals, clinics or health care facilities. These requests are designed to prevent possible interference with sensitive medical equipment.Petrol StationsObey all posted signs with respect to the use of wireless devices or other radio equipment in locations with ﬂammable material and chemicals. Switch off your wireless device whenever you are instructed to do so by authorized staff.InterferenceCare must be taken when using the phone in close proximity to personal medical devices, such as pacemakers and hearing aids.PacemakersPacemaker manufacturers recommend that a minimum separation of 15 cm be maintained between a mobile phone and a pacemaker to avoid potential interference with the pacemaker. To achieve this use the phone on the opposite ear to your pacemaker and do not carry it in a breast pocket.Hearing AidsSome digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives.Other Medical DevicesPlease consult your physician and the device manufacturer to determine if operation of your phone may interfere with the operation of your medical device.

84Others󱛡Powered by Mascot Capsule®/Micro3D Edition™Mascot Capsule® is a trademark of HI CORPORATION.󱛡“Blu-ray Disc” and “Blu-ray” are trademarks of the Blu-ray Disc Association.󱛡Other company names and product names described in the text are trademarks or registered trademarks of those companies.Others󱛡This product contains IrFront of ACCESS CO., LTD. IrFront is a registered trademark or trademark of ACCESS CO., LTD. in the United States, Japan and/or other countries.󱛡The IrDA® Feature Trademark is owned by the Infrared Data Association and used under license therefrom.󱛡Contains Adobe® Flash® Lite® and Adobe Reader® Mobile technology by Adobe Systems Incorporated. Adobe Flash Lite Copyright © 2003-2013 Adobe Systems Incorporated. All rights reserved. Adobe Reader Mobile Copyright © 1993-2013 Adobe Systems Incorporated. All rights reserved. Adobe, Adobe Reader, Flash, and Flash Lite are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.󱛡This product contains software licensed complying with GNU General Public License, Version 2 (GPL v2), GNU Lesser General Public License (LGPL), etc. The program is free software; you can copy it and/or redistribute it and/or modify it under the terms of the GPL v2 or LGPL as published by the Free Software Foundation. At least three(3) years from delivery of products, Panasonic Mobile Communications Co., Ltd will give to any third party who contact us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under GPL v2/LGPL. Contact Information (pmc-cs@gg.jp.panasonic.com)Source code is also freely available to you and any other member of the public via the website below. (http://panasonic.jp/mobile/gpl/english.html)Please note that we cannot respond to any inquiries regarding the source code. You cannot download the source code from a mobile phone. Use your PC to download the source code. For more details on the relevant software (including license information of GPL v2/LGPL), follow these steps: in Main Menu, →Data box →My document →imode →GPL/LGPLライセンス説明. (The ﬁrst part of “GPL/LGPLライセンス説明” is only available in Japanese.)󱛡iWnn of OMRON SOFTWARE Co., Ltd. is used for conversion methods for Japanese language. iWnn © OMRON SOFTWARE Co., Ltd. 2008-2012 All Rights Reserved. 󱛡“Text Proﬁler” is trademark of OMRON Corporation.󱛡The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Mobile Communications Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners.󱛡This product is licensed under the MPEG-4 patent portfolio license and AVC patent portfolio license for the personal use of a consumer or other uses in which it does not receive remuneration to(i) encode video in compliance with the MPEG-4 Visual Standard, AVC Standard (“MPEG-4/AVC Video”) and/or(ii) decode MPEG-4/AVC Video that was encoded by a consumer engaged in a personal activity and/or was obtained from a video provider licensed to provide MPEG-4/AVC Video.No license is granted or shall be implied for any other use.Additional information may be obtained from MPEG LA, L.L.C. See (http://www.mpegla.com).󱛡This product is manufactured or sold under license from InterDigital Technology Corporation.

86OthersUnlocking SIM This FOMA terminal supports SIM unlock. When the SIM is unlocked, other operator company’s SIM cards can be used with your FOMA terminal. 󱛡Contact your nearest docomo Shop for unlocking SIM. 󱛡You are charged separately a charge for unlocking SIM. 󱛡If other operator company’s SIM is used, restrictions may be applied to some of the services or the functions. Note that NTT DOCOMO, INC. cannot provide any guarantees for operating the FOMA terminal when using other company’s card. 󱛡For further details on the SIM unlock, refer to the DOCOMO website.

87OthersIndexAAC adapter ...........................................21After-sales service ...............................68Alarm ....................................................60Antenna ..................................................4Area mail ..............................................46Auto-sort ..............................................45Auto timer ............................................52BBack cover .............................................4Backlight .............................................. 32Bar code reader ...................................61Battery level .........................................23Battery pack ........................................20Attaching/removing ...........................20Charging ...........................................21Bluetooth antenna .................................4Bluetooth function ............................... 62Bookmark ............................................50CCall/charging indicator .......................... 4Caller ID notiﬁcation ............................ 22Call forwarding service ........................41Call rejection setting ............................37Call waiting service .............................41Camera .............................................4, 51Channel setting ....................................54Character entry ....................................30Line feed ...........................................30Pictograms ........................................30Smiley ............................................... 30Symbols ............................................ 30Character size ......................................33Charging ..............................................21Charging terminal ..................................4Check mail/message ........................... 45Command navigation key ...................25Connector terminal ................................4Connector terminal cover ...................17Continuous shooting ...........................52Copyrights ...........................................83DDeco-mail .............................................44Decome-Anime .................................... 45Desktop holder ....................................21Dial lock ...............................................36Dial/received list .................................. 38Display .............................................3, 23DOCOMO connection manager .......... 66docomo mini UIM card ........................20docomo Palette UI ...............................28Draining water .....................................19EEarly warning “Area Mail” ...................46Earphone ................................................4Earpiece ................................................. 3Earpiece volume ..................................39eco mode ............................................. 34eco mode autostart .............................34eco mode setting .................................34ECO NAVI .............................................24Emergency call ....................................42English display .....................................22Error information send setting ............70Export administration regulations ......83FFinder display ......................................51FOMA antenna .......................................4Full browser .........................................49Function list ......................................... 74GGuide ....................................................29HHolding .................................................38Ii-αppli ...................................................57i-channel .............................................. 50i-concier ............................................... 59Illumination setting ..............................33i-mode ..................................................48

88Othersi-mode fault diagnosis site ..................70i-mode mail .......................................... 44Compose ..........................................44Forward .............................................45Receive .............................................45Reply .................................................45Send ..................................................44i-mode password .................................35i-motion ................................................58Infrared communication ......................66Infrared data port.............................4, 66Initialize ................................................37Initial setting ........................................22Intellectual property right ....................83International call ..................................39International roaming .......................... 42i-Widget ...............................................57KKeypad lock .........................................37Keypad sound......................................32Kisekae tool .........................................33Koe-no-takuhaibin ...............................38LLight sensor ...........................................3List of materials used .......................... 12MMachi-chara setting ............................33Mail .......................................................44Main menu ...........................................26Main speciﬁcations .............................78Making a call ........................................38Making a videophone call ...................38Manner mode.......................................31Menu icon ............................................26Microphone ............................................3microSD card .......................................63Back up/restore ................................65Check ................................................64Copy .................................................64Format ...............................................64Inserting/removing ............................63Multi one-touch function .....................27Multi one-touch key.........................3, 27MUSIC player .......................................56MyFACE ............................................... 28NNavigation displays .............................25Network security code ........................35Network services .................................40Notiﬁcation icon ..................................24Numeric keys ......................................... 3OOmakase lock ...................................... 36One-push open button ..........................4Options ................................................73Original .................................................31Original lock .........................................37Outdoor mode .....................................32Out-of-service-area indication ............23Overseas use .......................................42Own number ........................................ 22PPart names and functions .....................3PC connection .....................................66Phonebook ..........................................47Add to phonebook ............................47Delete data ........................................47Edit phonebook ................................47Search phonebook ...........................38Picture album .......................................52PIN1 code ............................................ 35PIN1 code entry set .............................36PIN2 code ............................................ 35PIN unblocking key (PUK) ...................36Playing moving picture ..................52, 58Portrait rights ....................................... 83Power on/off ........................................22Power saver mode ..............................32Proﬁle ...................................................22Public mode (Drive mode) ...................40Public mode (Power off) ......................40QQR code ............................................... 61RRadio waves reception level ............... 23Receiving a call ...................................39Receiving a videophone call ............... 39

89OthersRecord message .................................39Related devices ................................... 73Reset settings ......................................37Ring volume .........................................31SSAR ......................................................80Scanning function................................72Schedule ..............................................60Screen memo .......................................50Security codes .....................................34Security scan function (Scanning function)..............................72Select language ...................................22Select ring tone ...................................31Shabette-Kensaku ...............................59Shooting moving pictures ...................51Shooting still images ...........................51Shortcut ...............................................29Simple menu ........................................26Site access ..........................................48SMS ......................................................46Compose ..........................................46Receive .............................................46Send ..................................................46Software update ..................................70Speaker ..................................................4Speciﬁc absorption rate ......................80Stand-by display ...........................26, 32Stand-by shortcut................................24Start by voice .......................................60Status icon ........................................... 23Strap hole ..............................................4Sub-display ......................................4, 24Submenu ..............................................26TTerminal security code ........................35Timer recording ...................................55Trademarks ..........................................83Troubleshooting ................................... 67TV timer ................................................55UUpdate (Pattern data) .......................... 72VVibrator setting ....................................31Video ....................................................55Video recording ................................... 55View blind ............................................33Viewer display......................................54Viewing still images ............................. 52Voice mail service ................................41WWarranty ...............................................68Waterproof/dust-proof performance ..16WMA ﬁle ...............................................55WORLD CALL ......................................39WORLD WING......................................42Numerics1Seg .....................................................531Seg antenna .........................................4

90Access the following for checking or changing the contents of your contract, or for applying to respective services, and asking for related documents: ｉMenu ▶ お客様サポート (User support) ▶ お申込・お手続き (Applications/Procedures)▶ 各種お申込・お手続き (Respective applications/procedures) My docomo (http://www.mydocomo.com/) ▶ 各種お申込・お手続きFrom i-modePacket communication charges freeFrom PC 󱛡“お客様サポート (User support)” and My docomo are available in Japanese only. 󱛡You will need your “Network Security Code” for the access from i-mode. 󱛡No packet communication charges are incurred for the access from i-mode. Accessing from overseas will incur charges. 󱛡You will need your “docomo ID/password” for the access from a PC. 󱛡If you do not have or you have forgotten your “Network Security Code” or “docomo ID/password”, contact “General Inquiries” listed on the back page of this manual. 󱛡You may not be able to access the site depending on the details of your subscription. 󱛡You may not be able to access the site due to system maintenance, etc.Using mobile phone with your manners!When using your mobile phone in a public place, don’t forget to show common courtesy and consideration for others around you.In the following cases, be certain to turn off the power. ■Where use is prohibited 󱛡When using this mobile phone on an airplane or at a hospital, follow the instructions of the airline or medical institution. In areas where mobile phone usage is prohibited, turn off the power.In the following cases, be certain to set Public mode. ■While driving 󱛡Using the mobile phone in your hand while driving is subject to punishment. This does not apply in unavoidable circumstances when, for instance, responding to someone who is sick, injured or when maintaining public order. ■When in theaters, movie theaters, museums, and similar venuesRespect the privacy.Please be considerate of the privacy of individuals around you when shooting and sending photos using camera-equipped mobile phones. An Environment Protection Program by DOCOMOSimpliﬁed Version of the ManualWe have edited the traditional instruction manual to simplify the descriptions of basic operational procedures for respective functions. As a result, we have succeeded to reduce the consumption of paper used. For the functions frequently used and more detailed descriptions, you can refer to “使いかたガイド (Guide)” (in Japanese only) that comes with the FOMA terminal and the DOCOMO website.Collection and Recycling of Mobile PhonesWe collect mobile phones and related equipment that you no longer need even if it is not docomo product.Please bring them to your local docomo Shop.*Acceptable Products: Mobile phones, PHS terminals, battery chargers, and desktop holders (regardless of the provider)

Navigation menu