Panasonic Mobile Communications 113059A Single Mode UMTS Phone with Bluetooth User Manual P 01F MANUAL E 130905
Panasonic Mobile Communications Development of Europe Ltd Single Mode UMTS Phone with Bluetooth P 01F MANUAL E 130905
User Manual
P-01F
INSTRUCTION MANUAL ’13.10
Thank you for selecting the “P-01F”.
Read this manual before use to correctly operate your P-01F.
For Using This Manual
Note that “P-01F” is referred to as “FOMA terminal” in this manual.
Most operating procedures and displays in this manual are shown with the default settings of the “White” handset. Further, displays and
illustrations shown in this manual are for reference. The actual ones might differ.
P-01F Handset (With Warranty)
Battery Pack P23
Instruction Manual
(Japanese version)
See page 73 for optional items that support this FOMA terminal.
About manual of P-01F
The operating procedures for the P-01F are also published as in
“使いかたガイド (Guide)” on-screen manual installed onto your
FOMA terminal, and “Instruction Manual (Detailed Version)” as a
PDF. (In Japanese only)
◆“Instruction Manual” (this manual)◆
Description of the displayed content and operating
procedures for basic functions
◆“使いかたガイド (Guide)” (installed onto your FOMA terminal)◆
Description of the outline and operations of frequently used
functions
From the P-01F
m
▶
便利ツール (Tool)
▶
使いかたガイド (Guide)
※ This function is available in Japanese mode only.
◆“Instruction Manual (Detailed Version)” (PDF)◆
From a PC, download detailed information about all the
functions and the operating procedures. (In Japanese only)(
http://www.nttdocomo.co.jp/support/trouble/manual/
download/index.html)
※ Note that the URL and published contents may be modified
without notice.
Basic Package
Desktop Holder P54
Back Cover P61
For Loss, Theft, Malfunction, and Inquiries while Overseas (24-hour Reception)
■From DOCOMO mobile phones
International call access code
for the country you stay -81-3-6832-6600*
(toll free)
* You are charged a call fee to Japan when calling from a land-line phone, etc.
※ If you use P-01F, you should dial the number +81-3-6832-6600 (to enter ‘+’, press and hold the ‘0’ key for at least one second).
■From land-line phones ＜Universal number＞
Universal number
international prefix -8000120-0151*
* You might be charged a domestic call fee according to the call rate for the country you stay.
※ For international call access codes for major countries and universal number international prefix, refer to the DOCOMO International Services website.
●If you lose your FOMA terminal or have it stolen, immediately take the steps necessary for suspending the use of the FOMA terminal.
●If the FOMA terminal you purchased is damaged, bring your FOMA terminal to a repair counter specified by DOCOMO after returning to Japan.
General Inquiries
<docomo Information Center> Repairs
0120-005-250 (toll free)
* Service available in English, Portuguese, Chinese, Spanish.
* Unavailable from part of IP phones.
(Business hours: 9:00 a.m. to 8:00 p.m.)
■From DOCOMO mobile phones
(In Japanese only)
(No prefix) 113 (toll free)
* Unavailable from land-line phones, etc.
■From land-line phones
(In Japanese only)
0120-800-000
(toll free)
* Unavailable from part of IP phones.
■From DOCOMO mobile phones
(In Japanese only)
(No prefix) 151 (toll free)
* Unavailable from land-line phones, etc.
■From land-line phones
(In Japanese only)
0120-800-000
(toll free)
* Unavailable from part of IP phones.
(Business hours: 24 hours (open all year round))
(Business hours: 9:00 a.m. to 8:00 p.m. (open all year round))
●Please confirm the phone number before you dial.
●For Applications or Repairs and After-Sales Service, please contact the above-mentioned information center or the docomo Shop etc. near you on the NTT DOCOMO website
or the i-mode site.
NTT DOCOMO website (http://www.nttdocomo.co.jp/english/)
i-mode site ｉMenu
▶
お客様サポート (User support)
▶
ドコモショップ (docomo Shop) (In Japanese only)
Don’t forget your mobile phone ... or your manners!
When using your mobile phone in a public place, don’t forget to show common courtesy and consideration for others around you.
Sales:
Manufacturer:
October ’13 (1st Edition)
PXQP1011ZA/J1
F0913-0
1
※It is prohibited to copy all or part of this manual without permission. ※The instructions contained in this manual may be changed without notice.
Contents Introduction
FOMA Terminal ······························ 2
Part Names and Functions ············ 3
Precautions ···································· 5
Handling Precautions ·················· 12
Waterproof/Dust-proof Performance
··· 16
Basic
Operation
Before Using ················································· 20
Screen Explanation ······································ 23
Character Entry ············································ 30
Sound/Screen Setting ·································· 31
Lock/Security ················································ 34
Connect
Call Telephone ·············································· 38
Mail ································································ 44
Phonebook ··················································· 47
Search
i-mode/Full Browser ····································· 48 i-channel ······················································· 50
Enjoy
Camera ·························································· 51
1Seg ······························································ 53
Music ····························································· 55
i-αppli/i-Widget ············································· 57
i-motion ························································· 58
More
Convenient
i-concier ························································ 59
Convenient Tools ·········································· 59
Data Management ········································ 63
Others
Support ························································· 67
Appendix ······················································· 74
Index ····························································· 87
2
Introduction
FOMA Terminal
This FOMA terminal supports W-CDMA system.
Because the FOMA terminal uses radio waves, you cannot use it in
places where the radio waves do not reach, where they are weak
even outdoors, such as inside tunnels, basements, or buildings,
or out-of-service area. You might not be able to operate the FOMA
terminal even when you are in a place with a fine view such as in
a high-rise building or apartment. Note that you may experience
interruption of calls even if the three antennas respond to a strong
radio wave, and you remain without moving to use the FOMA
terminal.
Since the FOMA terminal uses radio waves as the medium of
telecommunication, calls may be tapped by a third party.
However, the W-CDMA system automatically supports tapping
prevention, so your conversation will be incomprehensible to the
third party, because it is recognized as mere noise.
The FOMA terminals change your voice into digital signals and send
them to the other party. In places where the radio waves are weak,
the digital signals may not be converted correctly, and in such a
case, the voice may sound different from the actual one.
The user hereby agrees that the user shall be solely responsible
for the result of the use of SSL/TLS. Neither DOCOMO nor the
certifiers as listed herein make any representation and warranty as
for the security in the use of SSL/TLS. In the event that the user
shall sustain damage or loss due to the use of SSL/TLS, neither
DOCOMO nor the certifiers shall be responsible for any such
damage or loss.
Certifiers: VeriSign Japan K.K., GlobalSign K.K.,
Cybertrust Japan Co., Ltd., EMC Japan K.K.,
SECOM Trust Systems Co., Ltd., Comodo CA Ltd.,
Entrust, Inc., and Go Daddy, Inc.
This FOMA terminal supports FOMA Plus-Area and FOMA
High-Speed Area.
Although the display was created using highly advanced technology,
it is possible that some pixels might not light, or that some pixels
light continuously. Please be aware that this is a characteristic of
liquid crystal displays, and does not indicate a malfunction.
You are advised that you make separate notes of information (such
as Phonebook entries, schedule events, memos, record messages,
voice memos) stored in the FOMA terminal and keep them in a safe
place. Note that we cannot be held responsible for the unlikely event
of loss of the stored content due to a malfunction, repair, change of
your model, or other mishandling of the FOMA terminal.
You are advised to save your important data on the microSD card. If
you have a personal computer, you can transfer and save data such
as Phonebook entries, mail messages, schedule events, and others
on the personal computer by using DOCOMO keitai datalink.
3
Introduction
Part Names and Functions
❶Air vent
For adjusting the pressure inside the
FOMA terminal
❷Earpiece
For listening to the other party’s voice
❸Display
❹oCommand navigation key
For operating functions and menus
❺mMenu key
For showing the Main Menu
❻lMail key
For showing the Mail Menu
❼dStart key
For starting to talk
❽Numeric keys
For entering phone numbers and text
❾QWEMulti one-touch key
Light sensor
For sensing brightness (Do not cover it
with your hands or do not put a sticker on
it. Doing so might disable detecting the
brightness.)
Microphone
For speaking to the other party
cCamera key/1Seg key
rClear key/i-channel key
ii-mode key/i-αppli key
hPower/End key
For turning on/off the power or ending a
call
❷
❸
❻
❹
❾
❽
❺
❼
❶
4
Introduction
Call/Charging indicator
Lights while you are receiving a call or
message, or charging.
Sub-display
FOMA antenna※
Camera
For shooting portraits and/or landscapes
Speaker
Back cover
Remove this when attaching/removing the
battery pack, docomo mini UIM card, and
microSD card.
1Seg antenna※/Bluetooth® antenna※
For using reception of 1Seg broadcasting
and Bluetooth communication
Infrared data port
For using infrared communication and the
infrared remote control
Strap hole
xMulti key
For showing the Task menu
One-push open button
For opening the FOMA terminal (Be careful
not to drop the FOMA terminal by the
rebound when opened.)
Connector terminal
Integrated terminal for connecting
earphone or for charging, etc.
For using earphone
Connect an optional connector-terminal-
compatible earphone. When using a
connector-terminal-non-compatible
earphone, use an optional plug adapter for
connection.
Example for connecting the Stereo
Earphone Set 01 (option) to external
connector terminal
This mobile phone serves as the port where
both the AC Adapter (charging) and Stereo
Earphone Set 01 (Earphone/microphone
terminal) are plugged in.
AC Adapter
Stereo Earphone Set 01
Charging terminal
※The antenna is embedded in the handset.
Covering the area near the antenna with
your hand may adversely affect the quality
of the communication.
❶
5
Introduction
■Before using the FOMA terminal, read these safety precautions
carefully so that you can use it correctly.
After reading the precautions, keep them in a safe place.
■Be sure to observe these safety precautions to prevent you or
those around you from inflicting injury and to avoid unnecessary
damage to the property.
■The symbols below indicate the levels of danger or damage that
can be caused if the particular precautions are not observed and
equipments are not used properly.
Danger
This symbol indicates that incorrect
handling will almost certainly cause
death or serious injury.
Warning
This symbol indicates that incorrect
handling poses a risk of causing
death or serious injury.
Caution
This symbol indicates that incorrect
handling poses a risk of causing a
slight injury or damage to the product
or property.
■The following symbols show specific directions:
Denotes actions prohibited to do.
Denotes not to disassemble the units.
Denotes not to use where the equipment may get wet,
and avoid get it wet.
Denotes not to touch with wet hands.
Denotes mandatory instructions (matters that must be
complied with).
Denotes to pull the power plug out of an outlet.
■“Precautions” are divided into the following seven sections:
General precautions for FOMA terminal, batteries,
adapters, desktop holder, and docomo mini UIM card ...................... P.6
Precautions for FOMA terminal .......................................................... P.7
Precautions for batteries .................................................................... P.9
Precautions for adapters and desktop holder ...................................P.10
Precautions for docomo mini UIM card .............................................P.11
Notes on using near electronic medical equipment ..........................P.11
List of materials used ........................................................................P.12
Don’t
Do not
disassemble
Avoid
Water
Not wet
hands
Do
Pull the
power plug
out
Precautions ALWAYS FOLLOW THESE DIRECTIONS
6
Introduction
General precautions for FOMA
terminal, batteries, adapters, desktop
holder, and docomo mini UIM card
Danger
Do not use, store, or leave the
FOMA terminal or its accessories in
places with a high temperature (such
as near fire, near heating appliances,
inside a kotatsu or near other
furniture with heating elements, in
places exposed to direct sunlight, or
in cars heated by the sun).
Fire, burns, or injury may result.
Do not place the FOMA terminal
or its accessories inside cooking
appliances such as microwave
ovens or high-pressure containers.
Fire, burns, injury or electric shock
may result.
Do not attempt to disassemble or
remodel the FOMA terminal or its
accessories.
Fire, burns, injury or electric shock
may result.
Do not allow the FOMA terminal
or its accessories to get wet either
from water, drinking water or pet
urine, etc.
Fire, burns, injury or electric shock
may result.
See “Waterproof/Dust-proof
Performance” on page 16 for details
on waterproof performance.
With your FOMA terminal, use the
batteries and adapters specified
by NTT DOCOMO, INC.
Fire, burns, injury or electric shock
may result.
Warning
Do not throw the FOMA terminal
or accessories, or subject them to
severe force or shocks.
Fire, burns, injury or electric shock
may result.
Do not allow electrically conductive
foreign objects (such as metal
pieces or pencil leads) to come into
contact with the FOMA terminal’s
charging terminal or connector
terminal. Do not allow such objects
to enter into the FOMA terminal.
Fire, burns, injury or electric shock
may result.
Do not cover or wrap the FOMA
terminal or its accessories with a
cushion, etc. while it is being used
or recharged.
Fire or burns may result.
Before entering a gas station or
other places where flammable
gases are generated, be absolutely
sure to turn off the FOMA terminal
and stop charging if it is being
charged.
Otherwise, the flammable gases
may ignite.
If odor, overheat, discoloration,
or deformation is detected during
use, battery charge, or storage,
immediately follow the instructions
below:
• Pull the power plug out of the
outlet or cigarette lighter socket.
• Turn off the power of the FOMA
terminal.
• Remove the battery pack from
the FOMA terminal.
Fire, burns, injury or electric shock
may result.
Caution
Do not place the FOMA terminal or
accessories on unstable locations
such as wobbly tables or slanted
locations.
They may fall off and cause injury.
Do not store in humid or dusty
places, or in high temperature
environments.
Fire, burns or electric shock may
result.
If the FOMA terminal and its
accessories are used by a child,
a guardian should explain how to
operate them correctly. During use,
a guardian should also check that
they are being used as instructed.
Otherwise, injury may result.
Don’t
Don’t
Do not
disassemble
Avoid
Water
Do
Don’t
Don’t
Don’t
Do
Do
Don’t
Don’t
Do
7
Introduction
Keep out of the reach of babies
and infants.
Accidental swallowing or injury may
result.
Take special care when you use
the FOMA terminal for a long time
with the adapter connected.
If you use the i-αppli programs, talk
on the videophone, watch 1Seg
programs and so on for a prolonged
period of time while charging, the
temperature of the FOMA terminal,
battery pack or adapter may rise.
If you keep direct contact with
high-temperature parts, redness,
itching, a rash or low-temperature
skin burns may result depending on
the state of your physical condition
or constitution.
Precautions for FOMA terminal
Warning
Do not directly point the infrared
data port at someone’s eyes
during transmission.
Doing so may harm the person’s
eyes.
While using infrared
communication, do not point the
FOMA terminal’s infrared data
port at a home electrical appliance
which is equipped with an infrared
device.
The infrared device may malfunction,
and possibly cause an accident.
Do not allow liquids such as water,
or foreign materials such as metal
pieces or flammable materials to
get into the docomo mini UIM card
or microSD card slot of the FOMA
terminal.
Fire, burns, injury or electric shock
may result.
Turn off the FOMA terminal in
places where use is prohibited
such as in airplanes and hospitals.
Otherwise, the electronic devices
and electronic medical equipment
in those places may be adversely
affected. If the Auto power ON
function is set, deactivate the
setting, then turn off the power.
For use inside medical facilities,
make sure that you comply with
their regulations.
Engaging in any prohibited acts
such as using the FOMA terminal in
an airplane is punishable by law.
However, it may be possible to use
a FOMA terminal in an airplane,
such as by setting radio wave
emission to off. Comply with the
instructions given by the airline
company.
When talking in Hands-free mode
or when a ring tone is sounding,
be absolutely sure to keep the
FOMA terminal away from your
ear.
Further, when you play games
or play back music with the
earphone/microphone etc.
connected, adjust the sound
volume to moderate volume.
The excessive sound volume
impairs your hearing.
Further, accidents may result due
to the hardness of hearing of
surrounding sound.
For those with weak heart
conditions, the vibrator and ring
volume must be adjusted carefully.
Otherwise, the functions may
adversely affect your heart.
If you are using an electronic
medical device or other type
of device, check with its
manufacturer or vendor as to
whether it will be affected by the
signals from the FOMA terminal.
The FOMA terminal may adversely
affect the device.
Do
Do
Don’t
Don’t
Don’t
Do
Do
Do
Do
8
Introduction
Turn off the FOMA terminal when
near electronic devices using
high-precision control or weak
signals.
The FOMA terminal may cause the
electronic devices to malfunction
and have other adverse effects.
※ Electronic devices that may be
affected:
Hearing aids, implanted
cardiac pacemakers, implanted
defibrillators, other electronic
medical equipment, fire alarms,
automatic doors and other
automatically controlled devices.
If you use an implanted cardiac
pacemaker, implanted defibrillator
or any other electronic medical
equipment, consult the
manufacturer or retailer of the
device for advice regarding
possible effects from the radio
waves.
If the display part or camera lens
is broken, be careful about broken
glasses or the exposed interior of
the FOMA terminal.
A plastic panel is used for the
surface of the display area and
camera lens, making it hard for the
glass to break into pieces. However,
if you touch the damaged or
exposed parts by mistake, you may
injure yourself.
Caution
Do not swing around the FOMA
terminal by its strap or other parts.
You may hit yourself or others,
possibly causing injury or other
accidents.
Do not use the FOMA terminal if it
has been damaged.
Fire, burns, injury or electric shock
may result.
If you accidentally damage the
display part and the substance
inside leaks out, keep your face,
hands and skin away from it.
Otherwise, you may impair your
eyesight or damage your skin.
If this substance should get into
your eyes or mouth, immediately
rinse them with clean water, and
then seek medical attention.
If it should adhere to your skin or
clothing, immediately wipe it off
with alcohol or similar liquid, and
then rinse the affected area with
soap and water.
Do not open the FOMA terminal
by pressing the one-push open
button near persons around you or
your face.
The FOMA terminal may hit you
or persons around you, causing
accidents and injuries.
Before using the FOMA terminal
inside a car, check with its
manufacturer or dealer whether
the signals from the FOMA
terminal will have any adverse
effects.
In some vehicle models, the signals
may adversely affect the electronic
devices inside the vehicle. Such
cases are rare. However, if this
happens, stop using the FOMA
terminal immediately.
Itching, rash or eczema may be
caused depending on your physical
conditions or predisposition. If an
abnormality occurs, stop using the
FOMA terminal immediately, and
then seek medical attention.
See “List of materials used” on
page 12 for material of each part.
Be careful not to get your finger or a
strap caught in the parts when you
close or open the FOMA terminal.
Otherwise, injury or other accidents
may result.
View the display in a sufficiently
light place keeping a certain
distance from your eyes.
Otherwise, your eyesight may
become impaired.
Do
Do
Don’t
Don’t
Don’t
Don’t
Do
Do
Do
Do
9
Introduction
Precautions for batteries
■Check the description on the label of the
battery pack for the type of battery.
Description Type
Li-ion 00 Lithium-ion battery
Danger
Do not let any metal object such
as a wire come in contact with
the battery terminals. Also do not
carry or store the battery together
with any metal objects like a
necklace.
Otherwise, the battery pack may
ignite, burst or overheat and its
electrolyte may leak.
When installing the battery in the
FOMA terminal, check that it is
facing the right way, and if the
battery cannot be installed easily,
do not force it into place.
Otherwise, the battery pack may
ignite, burst or overheat and its
electrolyte may leak.
Do not throw the battery into fire.
Otherwise, the battery pack may
ignite, burst or overheat and its
electrolyte may leak.
Do not pierce it with nails, hit it
with a hammer, or step on it.
Otherwise, the battery pack may
ignite, burst or overheat and its
electrolyte may leak.
If the battery fluid or other material
gets into your eyes, do not rub
them. Flush your eyes with clean
water and seek medical attention
immediately.
Otherwise, the loss of eyesight may
result.
Warning
Never use the FOMA terminal if it
has damages such as deformities
or scratches as a result of
dropping it.
Otherwise, the battery pack may
ignite, burst or overheat and its
electrolyte may leak.
Immediately stop using the FOMA
terminal and keep it away from
fire if the battery leaks or emits an
odor.
The leaked battery fluid may ignite,
causing fire or burst.
Be careful that your pets do not
bite into the battery pack.
Otherwise, the battery pack may
ignite, burst or overheat and its
electrolyte may leak.
Caution
Do not dispose of the exhausted
battery with other waste.
The battery may catch fire or
damage the environment. After
insulating the battery terminals
with tape, take the unneeded
battery to a handling counter such
as a docomo Shop or dispose of
it in accordance with local waste
disposal regulations.
Do not use or attempt to charge a
wet battery.
Otherwise, the battery pack may
ignite, burst or overheat and its
electrolyte may leak.
If the electrolyte fluid or other
material inside the battery has
leaked out, do not allow it to come
into contact with the skin on your
face, hands or any other part of
your body.
Contact may result in loss of sight
or skin problems.
If you get the fluid or other material
in your eyes or mouth, or on skin
or clothing, immediately wash the
affected areas with clean water.
If you get it in your eyes or mouth,
immediately seek medical attention
after rinsing.
Don’t
Don’t
Don’t
Don’t
Do
Don’t
Do
Do
Don’t
Don’t
Do
10
Introduction
Precautions for adapters and
desktop holder
Warning
Do not use the adapter if its cord
has been damaged.
Fire, burns or electric shock may
result.
Do not use the AC adapter and
desktop holder in humid places
such as a bathroom.
Fire, burns or electric shock may
result.
The DC adapter is for use only in
a negative (-) grounded vehicle.
Do not use it in a positive (+)
grounded vehicle.
Fire, burns or electric shock may
result.
If a thunderstorm is nearby, do not
touch the adapter.
Otherwise, you may receive an
electric shock.
Never short-circuit the charging
terminal when the adapter is
plugged into the power outlet
or cigarette lighter socket. Also,
never touch the charging terminal
with fingers or other bare skin.
Fire, burns or electric shock may
result.
Do not place heavy objects on the
adapter cord.
Fire, burns or electric shock may
result.
When plugging the AC adapter
into the power outlet, or when
unplugging it from the outlet, do
not allow metal straps or other
metal objects to come in contact
with it.
Fire, burns or electric shock may
result.
Do not touch the adapter cord,
desktop holder, or power outlet
with wet hands.
Fire, burns or electric shock may
result.
Use the adapter at the specified V
AC.
When charging the FOMA terminal
overseas, use the AC adapter
available for use overseas to
charge the FOMA terminal.
Supplying the wrong voltage to
the AC adapter may result in a fire,
burns or electric shocks.
AC adapter: 100 V AC
DC adapter: 12/24 V DC
[For negative (-) grounded vehicles
only]
AC adapter available for use
overseas: 100 V to 240 V AC
[Connect only to household AC
outlet]
If a fuse of the DC adapter has
blown, replace it with a specified
fuse.
Fire, burns or electric shock may
result.
For the specified fuse, refer to each
instruction manual.
Keep the power plugs dust-free.
Fire, burns or electric shock may
result.
When plugging the AC adapter
into the power outlet, plug it in
securely.
Fire, burns or electric shock may
result.
When unplugging the power plug
from the power outlet or cigarette
lighter socket, do not yank the
adapter cord, but take hold of the
adapter to unplug it.
Fire, burns or electric shock may
result.
When you do not intend to use
the adapter for a long period of
time, disconnect the power plug
from the power outlet or cigarette
lighter socket.
Fire, burns or electric shock may
result.
Don’t
Don’t
Don’t
Don’t
Don’t
Don’t
Don’t
Not wet
hands
Do
Do
Do
Do
Do
Pull the
power plug
out
11
Introduction
If liquids such as water get in the
adapter, unplug the power cord
immediately from the outlet or
cigarette lighter socket.
Fire, burns or electric shock may
result.
Before cleaning, pull the power
plug out of the outlet or cigarette
lighter socket.
Fire, burns or electric shock may
result.
Precautions for docomo mini UIM
card
Caution
Be careful not to touch the cut
surface of the docomo mini UIM
card when removing it.
Otherwise, injury may result.
Notes on using near electronic
medical equipment
Warning
If you use electronic medical
equipment such as an implanted
cardiac pacemaker or implanted
defibrillator, use the FOMA
terminal 15 cm or more away from
an implanted cardiac pacemaker
or implanted defibrillator.
The FOMA terminal’s signals may
adversely affect the operation of
electronic medical equipment.
Patients using electronic medical
equipment other than implanted
cardiac pacemakers or implanted
defibrillators (outside medical
establishments for treatment at
home, etc.) should check the
influence of radio waves upon
the equipment by consulting its
manufacturer.
The FOMA terminal’s signals may
adversely affect the operation of
electronic medical equipment.
If the FOMA terminal has a chance
of coming within 15 cm of other
persons, such as when you are in
an area where you cannot move
freely, switch the FOMA terminal
to a state in which it does not emit
radio waves (such as by switching
it to Self mode or turning the
power off).
A person nearby might be using an
electronic medical device such as
an implanted cardiac pacemaker or
implanted defibrillator. The FOMA
terminal’s signals may adversely
affect the operation of electronic
medical equipment.
When using the FOMA terminal
within a medical institution, follow
the instructions of that medical
institution.
Pull the
power plug
out
Pull the
power plug
out
Do
Do
Do
Do
Do
12
Introduction
List of materials used
■P-01F Handset/Back Cover P61/Battery
Pack P23
Where it is used Material/Finishing
Outer
casing
Display
surface,
Battery
surface,
Battery
surface
(Hinge
side)
PC/UV coating
Connector terminal Stainless steel/
nickel plating, tin
plating
Connector
terminal
cover
Body PC/UV coating
Fitting pin
area
Polyester series
elastomer
Packing Silicon rubber
Panel of camera lens
area, Display panel,
Sub-display panel
PMMA/hard coating
Side key ABS
Around the side key ABS/UV coating
Charging terminal Brass/nickel plating,
nickel palladium
plating, gold plating
Key area, Sheet area of
numeric key surface
Acrylic urethane
Battery compartment
surface
Stainless steel/
nickel plating
Where it is used Material/Finishing
Battery
terminal
Resin part PA
Terminal
area
Titanium copper
alloy/nickel plating,
gold plating
Battery
pack
Resin part PC
Terminal
area
Glass epoxy/nickel
plating, gold plating
Label PET/Silicon varnish
docomo
mini UIM
card tray
Substrate
part
Glass epoxy/
gold plating, resist
printing
Resin part
of tray
LCP
Metal part
of tray
Stainless steel
Hinge area Center
area of
display
surface,
Hinge
support
area, Both
ends area
PC/UV coating
Center
area of
sub-display
surface
ABS/UV coating
Label (Battery
compartment surface)
PET
Back cover Body PC/UV coating
Packing Silicon rubber
One-push open button PC
■Desktop Holder P54
Where it is used Material/Finishing
Outer casing ABS
Connector terminal PPS
Cushion Urethane
Charging terminal Phosphor bronze/
nickel plating, gold
plating
Label PS
Lever POM
Handling Precautions
General notes
■The P-01F is provided with the
waterproof/dust-proof performance,
however, do not allow water to seep or
dust to get in the inside of the FOMA
terminal, or do not allow accessories and
optional items to get wet or adhere dust.
The battery, adapter, desktop holder,
and docomo mini UIM card are not
waterproofed/dust-proofed. Do not use
them in environments, which are high
in humidity such as in bathrooms, and
do not allow them to get wet from rain.
Furthermore, if carrying them against
your body, they become moist due to
perspiration and the internal parts may
become corroded, causing malfunction.
If the parts are found to have been
damaged due to exposure to the liquids,
any repairs will not be covered by
warranty, or repairs may not be possible.
This may be repaired at a cost if repairs
are possible.
13
Introduction
■Use a dry soft cloth such as the one
for cleaning glasses to clean the
equipment.
The display may be scratched if it is
rubbed hard with a dry cloth.
Stains may result from droplets of water
or dirt if they are left on the display.
Do not use alcohol, thinner, benzene,
detergent or other solvents for cleaning,
otherwise the printing may be removed
or discoloration may result.
■Occasionally clean the terminals of the
equipment using a dry cotton swab, etc.
The soiled terminals deteriorate the
connection and might cause power
discontinuity or incomplete charging. Wipe
the terminals with a cotton swab, etc.
Take care not to damage the terminals
when cleaning them.
■Do not place the FOMA terminal near an
air conditioner outlets.
Condensation may form due to rapid changes
in temperature, and this may corrode internal
parts and cause malfunction.
■Do not apply excessive force onto the
FOMA terminal and battery pack.
If you put the FOMA terminal in a bag
along with many other articles or sit with
the FOMA terminal in a clothes pocket, the
display, internal circuitry and the battery
pack could be damaged or malfunction.
Also, if an external device is left connected
to the connector terminal (earphone/
microphone terminal), the connector could
be damaged, or malfunction.
■Do not rub or scratch the display part
with metals.
Doing so might cause damage to the
part, resulting in trouble or malfunction.
■Carefully read each instruction manual
attached to optional items.
Notes on handling the FOMA terminal
■Avoid using in extremely high or low
temperatures.
The FOMA terminal should be used within
a temperature range of 5°C to 35°C and a
humidity range of 45% to 85%.
■If the FOMA terminal is operated near a
land-line phone, television set, radio or
other devices in use, it may adversely
affect the devices. Operate the FOMA
terminal as far away from these devices
as possible.
■It is recommended that you make
separate notes of the information stored
in the FOMA terminal and keep such
notes in a safe place.
We take no responsibility for any loss of
the stored data items.
■Do not drop the FOMA terminal or
subject it to strong impacts.
Malfunction or damage may result.
■Do not insert an external device to
the connector terminal (earphone/
microphone terminal) at a slant when
connecting, and do not pull it out when
it is inserted.
Malfunction or damage may result.
■Make sure that nothing, such as a strap,
gets caught between the parts of the
FOMA terminal when you close it.
Otherwise, malfunction or damage may
result.
■The FOMA terminal becomes warm
during use or charging but this is not an
abnormality. Use the FOMA terminal as
it is.
■Do not leave the camera in places
exposed to direct sunlight.
Pixels may be discolored or burns may
result.
■When using the FOMA terminal,
ensure that you shut the cover for the
connector terminal.
Dust or water might enter into the FOMA
terminal, causing malfunction.
■Do not use the FOMA terminal with the
back cover left removed.
The battery pack might come out, or
malfunction or damage may result.
■Do not apply an excessively thick sticker
onto the surfaces of the display or keys.
Otherwise, malfunctioning, damage or
problems with operation may result.
■While you are using the microSD card,
never take it off or turn off the power of
the FOMA terminal.
Data may be erased or malfunction may result.
■Do not place magnetic cards or similar
objects near the FOMA terminal or
between phone parts.
Magnetic data on cash cards, credit
cards, telephone cards and floppy disks,
etc. may be deleted.
■Do not bring magnetic substances close
to your FOMA terminal.
Problems with operation may result if
items with strong magnetic fields are
brought close to the FOMA terminal.
Notes on handling batteries
■Batteries have a limited life.
Though it varies depending on the usage
state, you are advised to replace the
battery if its usable time is extremely short
even when you fully charge it. Make sure
that you buy the specified battery.
14
Introduction
■Charge the battery in a place with an
appropriate ambient temperature of 5°C
to 35°C.
■The usable time of the battery differs
depending on the usage environment or
its remaining life.
■Depending on how the battery pack is
used, it might swell as its operating life
becomes short, but this is not a problem.
■Note the following points when you
store a battery pack:
Storage in a fully charged state (the
state immediately after charging is
completed)
Storage with no battery power left (the
state you cannot turn on the power of
the handset due to battery drain)
These may lower the battery pack’s
performance and shorten its operating life.
Before storing a battery, check
its remaining battery level: it is
recommendable, as a general rule, for the
battery icon to show two bars or for its
remaining battery level to be about 40%.
Notes on handling adapters and
desktop holder
■Charge the battery in a place with an
appropriate ambient temperature of 5°C
to 35°C.
■Charge the battery where:
There is very little humidity, vibration,
and dust.
There are no land-line phones,
television sets or radios nearby.
■While you are charging, the adapter may
become warm. This is not a malfunction,
so you can keep on using.
■Do not use the DC adapter for charging the
battery when the car engine is not running.
The car battery could go flat.
■When using the power outlet having the
disengaging prevention mechanism,
observe the instructions given in that
instruction manual.
■Do not give a strong shock. Also, do not
deform the charging terminal.
Malfunction may result.
Notes on handling the docomo mini
UIM card
■Do not apply more force than is
necessary when installing or removing
the docomo mini UIM card.
■The warranty does not cover damage
caused by inserting the docomo mini
UIM card into some other types of IC
card reader/writer.
■Always keep the IC portion clean.
■Use a dry soft cloth such as the one
for cleaning glasses to clean the
equipment.
■It is recommended that you make
separate notes of the information stored
on the docomo mini UIM card and keep
such notes in a safe place.
We take no responsibility for any loss of
the stored data items.
■For the environmental protection, bring
unneeded docomo mini UIM card to
a handling counter such as a docomo
Shop.
■Do not damage, carelessly touch, or
short-circuit the IC.
Data might be lost or malfunction may
result.
■Do not drop the docomo mini UIM card
or subject it to strong impacts.
Malfunction may result.
■Do not bend the docomo mini UIM card
or place something heavy on it.
Malfunction may result.
■Into the FOMA terminal, do not insert
the docomo mini UIM card with a label
or sticker pasted.
Malfunction may result.
Notes on using Bluetooth function
■The FOMA terminal supports the
security function that meets the
Bluetooth Specification, to secure
Bluetooth communication. However,
the security may not be sufficient
depending on the settings. Take care of
the security for communication when
using the Bluetooth function.
■Note that even if any leak of data
or information occurs while making
connection using the Bluetooth function,
we take no responsibility.
15
Introduction
■Radio frequencies
The radio frequencies for the Bluetooth
function of the FOMA terminal are as
follows:
2.4 FH 1
2.4 ： Indicates radio facilities that
use 2400 MHz frequencies.
FH ： Indicates modulation is the
FH-SS system.
1 ： Indicates that an estimated
interference distance is 10
meters or less.
： Indicates that all radio
frequencies 2400 MHz
through 2483.5 MHz are used,
and that the frequencies for
mobile object identifiers shall
not be avoided.
To use on airplane, confirm with airline
company in advance.
Use of Bluetooth may be prohibited in
some countries. Please confirm laws and
regulations applicable in the country/region
before use.
■Cautions on Using Bluetooth Devices
Bluetooth operates at radio frequencies
assigned to the in-house radio stations
for mobile object identifiers that have to
be licensed and are used in production
lines of a factory, specific unlicensed low
power radio stations, and amateur radio
stations (hereafter, referred to “another
radio station”) in addition to scientific,
medical, industrial devices, or home
electric appliances such as microwave
ovens.
1. Before using this product, make sure
that “another radio station” is not
operating nearby.
2. If radio interference between this
product and “another radio station”
occurs, move immediately to another
place or turn off power to avoid
interference.
3. For further details, contact “docomo
Information Center” on the back page
of this manual.
Caution
■Do not use the modified FOMA
terminal. Using a modified FOMA
terminal infringes the Radio Law/
Telecommunications Business Law.
The FOMA terminal has been certified as
conforming to the technical regulations of
specified radio equipment under the
Radio Law of Japan, as well as to those
of terminal devices under the
Telecommunications Business Law of
Japan, and bears a “technical conformity
mark ” on its nameplate as evidence
of conformity. Unscrewing the FOMA
terminal and modifying internal
components void the technical
regulations conformity certification. Do
not use the FOMA terminal in this state,
which infringes the Radio Law and
Telecommunications Business Law.
■Take special care not to operate the
FOMA terminal while driving.
Holding a mobile phone in your hand
while driving is subject to a fine or other
penalties.
However, this does not apply in
unavoidable circumstances when, for
instance, responding to someone who is
sick or injured or when maintaining public
order.
16
Introduction
Waterproof/Dust-proof
Performance
Your P-01F is capable of IPX5
※1
and IPX7
※2
waterproof performance and IP5X
※3
dust-proof
performance if the connector terminal cover
and back cover are firmly closed and no
clearance gap and float found in them.
※1
IPX5 means that the P-01F maintains its
performance as a phone even after a water
jet flow has been sprayed over the FOMA
terminal from all directions under conditions
where water in a volume of 12.5 liters/minute
is sprayed from a distance of about 3 meters
for at least 3 minutes using a water-pouring
nozzle with an inside diameter of 6.3 mm.
※2
IPX7 means that the P-01F maintains its
performance as a phone even after the phone
has been gently submerged in a container of
still city water to a depth of 1 meter at room
temperature, and left in place for about 30
minutes, and then removed from the water.
※3
IP5X refers to the degree of protection, and
indicates that the mobile phone has been
tested by placing it in a chamber wherein
dust particles measuring 75 μm in diameter
or smaller are circulated for 8 hours, and
then when the mobile phone is removed, it
maintains correct operation as a phone and
remains safe.
(Note) This does not mean that the waterproof
performance is guaranteed in all
given conditions of actual use. Read
this manual thoroughly before use to
prevent invasion of water or foreign
materials and then to enable you to
safely use your FOMA terminal.
You can operate the FOMA terminal in the rain,
in your kitchen, and also around poolside.
In the Rain
You can talk on the phone by holding
the phone in the rain with your wet hand
without umbrella. (Less than 20 mm/hour
of rainfall, and your feet get wet by drops of
rain rebounded off the ground)
※When your hands are wet or water drops
remain on the FOMA terminal, do not
attach/remove the back cover, nor open/
close the connector terminal cover.
Wash
When the FOMA terminal
gets dirty, you can slowly
swing and wash it in a bowl
filled with fresh water or
tap water at an ambient
temperature, or wash it
by hand while running a
slightly-weak water flow from
a faucet.
Wash your FOMA terminal with the back cover
firmly attached and while you are pushing the
cover of the connector terminal down.
Do not use brushes, sponges, soaps, or
detergents for washing.
After rinsing off the FOMA terminal in water,
wipe its surfaces thoroughly using a dry
cloth, drain off the water (see page 19), and
allow the FOMA terminal to dry out naturally.
On Leisure
Do not soak or drop your
FOMA terminal into a pool or
the sea nor operate it in water.
If pool water or seawater splash the FOMA
terminal, wash the terminal by following the
prescribed method (see page 16).
In the Kitchen
Do not spray liquids other than fresh water
or tap water at room temperature onto the
FOMA terminal or soak the terminal in them.
Do not spray hot water or cold water onto
the FOMA terminal or soak it in them.
Important Information before Use
Before using the FOMA terminal, make sure
that you attach the back cover firmly after
tightly closing the connector terminal cover.
If there is any small particles (fine fibers, hair
or grains of sand) between the covers and
the phone, water or dust could find its way
inside the phone. When attaching the back
cover after closing the connector terminal
cover, ensure that there is no particles or
dirt on or around these parts (especially the
packing).
Ensure that the connector terminal cover
and back cover are closed tightly and that
none of these covers are askew. If the
covers are not closed tightly, water or dust
could find its way inside the FOMA terminal.
To keep the waterproof/dust-proof
performance, we recommend replacing
parts once every two years regardless of
whether any irregularities are present. You
are charged for replacement of parts.
Take your FOMA terminal to a repair
counter specified by DOCOMO.
Soap/detergent
Sea/pool
17
Introduction
Opening/Closing the
Connector Terminal Cover
■Opening the connector terminal cover
① Hook your fingertip over the groove, pull
out the cover to direction A, and rotate it
as direction B.
■Closing the connector terminal cover
①
Align the connector terminal cover in
parallel with the FOMA terminal, and while
holding its base part firmly, push it into
place.
② Ensure that no float is found with the
connector terminal cover as a whole.
Removing/Attaching the
Back Cover
■Removing the back cover
① Hook your fingertip over the concave part
of the FOMA terminal, lift up in the
direction of the arrow to remove the back
cover.
Removing the back cover might produce
a sound.
The back cover should be firmly
closed for maintaining waterproofness/
dust-proofness. Opening the cover
forcibly may injure your nails or fingers.
■Attaching the back cover
① Fit the claws at the bottom side of the
back cover to the FOMA terminal securely
(A), and fit the claws at the left, right and
upper sides of the back cover into the
corresponding indentations, and push the
cover into place (B).
Claw (left, right, and
upper)
Packing
Rear surface of back cover
Claw (bottom)
②Push the 10 ○ marks printed on the
sticker of the back cover, and ensure that
no float is found anywhere on the cover.
③ Confirm there is no gap between the back
cover and the FOMA terminal.
Groove
Base part
Concave part
18
Introduction
Caution
■About FOMA terminal
Do not wash the FOMA terminal with a
washing machine or ultrasonic cleaner.
Never charge the battery when it gets wet.
Do not leave the FOMA terminal with drops
of water remained on.
・ The connector terminal might be
short-circuited.
・ Water might enter into the inside of the
FOMA terminal through the keys or hinges.
In cold districts, drops of water on the
FOMA terminal might freeze, resulting in
malfunction.
If the FOMA terminal gets wet, keep the
back cover attached and the connector
terminal cover closed, drain off the water
(see page 19), and immediately wipe off the
moisture remaining on the FOMA terminal
with a clean dry cloth.
Do not drop the FOMA terminal nor give a
shock to it.
The deterioration of the waterproof/
dust-proof performance might result
depending on the damage.
Do not soak the FOMA terminal in hot water,
use in a sauna, nor expose to hot wind
currents such as those of a dryer.
The FOMA terminal does not float on water.
Do not directly expose to the strong water
flows that exceed the standard (see page 16)
or submerge the mobile phone in water.
Do not directly place the FOMA terminal on
sandy beaches.
･ Sands enter into the holes on the
microphone, earpiece, or speakers may
reduce the volume.
･ If you operate the FOMA terminal with
water drops or sands adhered to, sound
might be deteriorated.
･ Even the slightest sands entered from the
connector terminal cover or back cover
could cause water or dust to enter the
inside of the FOMA terminal.
■About the connector terminal cover and
back cover
Do not open or close them with gloves put
on hands.
Fine dirt might adhere to the contact
surface of the packing.
Be careful that no fibers adhere to the
packing when you try to wipe off moisture
with a clean dry cloth.
Do not peel the packing off. Also do not
insert something pointed at the head into
the clearance of the connector terminal
cover or back cover.
The packing is damaged, resulting in water
or dust to enter into the FOMA terminal.
If the packing for the connector terminal
cover or back cover is damaged or
deformed, replace them at a repair counter
specified by DOCOMO.
If the back cover is broken, replace it with
new one.
Otherwise liquid such as water enters into
the inside of the FOMA terminal through
broken portions, and an electric shock or
corrosion of the battery pack could result.
When the FOMA terminal gets wet with the
connector terminal cover or back cover left
open, water enters inside, and an electric
shock or malfunction could be caused.
Do not use it as is, but turn off the power,
remove the battery pack, and then take it to
a repair counter specified by DOCOMO.
■About microphone, earpiece, air vent, and
speakers
Do not thrust something pointed at the head
into the holes on microphone, earpiece, air
vent, or speakers.
Do not leave water drops adhered to them.
It might happen that communications are
disabled.
■Others
Accessories and optional items are not
waterproofed/dust-proofed. Do not use the
desktop holder provided in a bathroom,
shower room, kitchen, or lavatory where
water is used, even if you do not connect to
AC adapter.
It is not that the waterproof performance is
guaranteed in all given conditions of actual
use. If the damage is found to be caused by
your mishandling of the FOMA terminal as a
result of our inspection, the guarantee is not
supported.
19
Introduction
Draining Water
If you operate the FOMA terminal with water
drops left adhered to, the volume level from
the speakers might be decreased or sound
quality vary.
Moisture may have entered inside through
the clearance gap of the keys or hinges.
Follow the procedures described below to
wipe moisture off the FOMA terminal:
①
Wipe completely moisture off the surface of
the FOMA terminal with a clean dry cloth.
② Securely take hold of the FOMA terminal,
and firmly swing each surface at least 20
times until no moisture sprays off.
<Draining from
earpiece and air vent>
<Draining from
microphone>
<Draining from
speaker and air vent>
③ Lightly push the FOMA terminal against
a clean dry cloth, and wipe moisture off
the clearance gap of the microphone,
earpiece, air vent, speaker, keys, or
hinges.
Do not directly wipe moisture out of joint
gap using a cotton swab, etc.
④ Fully drain moisture and then operate the
FOMA terminal.
Even when you follow the procedures
for draining water as described above,
moisture might remain in the FOMA
terminal. Therefore, use the FOMA
terminal after allowing it to dry out
naturally. Also, take care to keep any
objects you do not want to get wet away
from the FOMA terminal since water may
leak out from the FOMA terminal.
When Charging Battery
Accessories and optional items are not
waterproofed/dust-proofed. Check the
following before and after charging:
Never charge the battery with the FOMA
terminal left wet. If the FOMA terminal gets
wet, drain and wipe off moisture with a
clean dry cloth and then charge.
When you charge the battery with the
connector terminal cover open, firmly close
it after charging. To prevent water or dust
from entering inside through the connector
terminal, you are advised to use the desktop
holder provided for charging.
Do not touch the AC adapter and desktop
holder with your hands wet.
Do not use the AC adapter and desktop
holder in a bathroom, shower room, kitchen,
and lavatory where water is used.
20
Basic Operation
Before Using
Attaching docomo mini UIM card/
Battery Pack
To insert the docomo mini UIM card/battery pack, remove
the back cover and insert. (See page 17)
1
Insert the docomo mini
UIM card.
1.
Pulling the tab of the tray with your
finger, slowly pull the tray straight
out until it stops.
The tray cannot be removed, so be
sure not to pull the tray beyond the
position at which it stops. Doing so
might damage the tray or tab.
2.
With the gold IC side of the
docomo mini UIM card facing up,
check that the cut is facing left, and
place the card in the tray.
3.
Push the docomo mini UIM card
until it stops.
Push the docomo mini UIM card
inward firmly until it is in place.
When you remove the docomo mini UIM card
Pull out the tray, and then slide the docomo mini UIM card
slowly to pull it out.
After pulling out the tray until about half of the docomo
mini UIM card is visible, pull out the docomo mini UIM
card by sliding it out.
2
Attach the battery
pack.
Combine the terminal area
of the battery pack with
the battery terminal area
of the FOMA terminal, and
then push in the A direction
while pushing down in the B
direction.
When you remove the battery pack
Lift the battery up using the projection of it.
Ensure that you turn off, close, and take hold of the FOMA
terminal when you install or remove the docomo mini UIM
card or battery pack.
You can use only a docomo mini UIM card with this FOMA
terminal. If you have a docomo UIM card or FOMA card,
replace it at a handling counter of a docomo Shop.
Tab
Cut
Arrow mark
Projection
21
Basic Operation
Charging
Charging Using Desktop Holder
Desktop Holder
Call/Charging indicator
Engraved surface Power socket
AC Adapter
AC Adapter’s plug
Connector
1
With the engraved surface of the connector
of the AC Adapter (option) face up, plug
the connector straight into the connector
terminal of the desktop holder provided.
2
Pull out the AC Adapter’s plug, and plug it
into a household power socket of 100 V AC.
3
Set the FOMA terminal for charging terminal
side down onto the desktop holder securely.
Be careful that a commercial strap is not caught
between the FOMA terminal and desktop holder.
4
When charging is completed, hold the desktop
holder and lift up the FOMA terminal to remove.
Charging Using AC Adapter
Cover
Release buttons
Connector terminal
AC Adapter’s plug Call/Charging indicator
Engraved surface
Connector
Power
socket
AC Adapter
1
Open the cover of the connector
terminal. (See page 17)
To charge the battery, place the cover of the connector
terminal as illustrated. When you close or open the FOMA
terminal with the cover of the connector terminal opened,
be careful not to catch the cover of the connector
terminal between the parts of the FOMA terminal.
2
Insert the connector horizontally with the
engraved surface facing up until it clicks.
3
Pull out the AC Adapter’s plug, and plug it
into a household power socket of 100 V AC.
4
When charging is completed, pull out the
connector from the connector terminal
while pressing the release buttons.
22
Basic Operation
For detaching, pull out the connector horizontally while
pressing the release buttons. Malfunction could result if
you try to pull it forcibly.
When charging starts, the Call/Charging indicator lights in
red. When charging is completed, it turns off.
Turning Power ON
1
Press and hold h for at least one
second.
After the notes of waterproof and Wake-up display are
displayed, the Stand-by display appears.
To turn off the power
1.
Press and hold h (for at least two seconds)
▶
YES
Depending on the display in operation, the confi rmation
display may not appear.
Confi guring Initial Setting
The Initial Setting display appears when you turn on the
power for the fi rst time.
1
Set the date and time
▶
Set your Terminal
Security Code※
▶
Set the size of fonts
▶
Set Keypad Sound.
※“0000” is set at purchase.
Notifying Your Caller ID on the Other
Party’s Phone
1
m
▶
TEL function
▶
Dial/Receive setting
▶
Caller ID notifi cation
▶
Activate/
Deactivate
▶
ON
If you hear the guidance requesting your caller ID, either
set the Caller ID notifi cation or add “186” fi rst and then try
calling again.
Checking Your Own Phone Number
You can check your own phone number (
Own number), the
model name, etc.
1
m
▶
Profi le
Press c() to store your name, mail address, etc.
Refer to “Mobile Phone User’s Guide [i-mode]” for
how to check or change your mail address.
Switching to English Display
1
m
▶
本体設定 (Setting)
▶
文字表示／入力 (Text display/input)
▶
Select language
▶
English
The “バイリンガル (Select language)” setting is saved on
the docomo mini UIM card.
23
Basic Operation
Status icon
Screen Explanation
Viewing Display/Icon
Battery level (estimate)
Full Low
When is shown, charge the battery.
Depending on the usage state, the battery
level indication might signifi cantly vary.
Radio waves reception level (estimate)
Strong Weak
············ You are out of the FOMA
service area or radio waves do
not reach.
··············· In eco Mode
(gray) ······ eco Mode Autostart is set.
············· Unread i-mode mail or SMS
messages exist.
············· New i-concier information
exists.
···········
A Bluetooth device is connected.
··········· A microSD card is inserted.
·········· Vibrator is set.
·········· Ring Volume is set to “Silent”.
·········· In Manner Mode
···· An alarm is set.
··········· The number of record
messages
··········· The number of videophone
record messages
Here are given descriptions of the main icons. For descriptions
of other icons appearing on the display, you can get them
following the procedures as shown below:
m
▶
Setting
▶
Screen/Display
▶
Icons
24
Basic Operation
Proceed to respective functions from icons, etc.
You can proceed to respective functions by selecting “Status
icon”, “Notifi cation icon”, “Stand-by shortcut”, or date and
time.
1.
Oo
▶
Use Mo to highlight an icon, etc.
▶
Oo( )
Sub-display
Various information is displayed on the sub-display such as
the following:
Information is displayed in cases such as when you press x
with the FOMA terminal closed.
While the clock is displayed, each time you press x, you
can switch the clock pattern.
Clock Dialing Receiving a call
When a missed call is found
“” appears in cases such as when the
FOMA terminal is closed.
Press x to display the missed call record.
When a new mail message is received
“” appears in cases such as when the
FOMA terminal is closed.
Press x to display the received date/time and subject.
To display the received date/time and subject, you need to
set “Mail” of “Sub-display setting” to “ON” in advance.
1.
m
▶
Setting
▶
Screen/Display
▶
Sub-display setting
▶
ON
▶
Mail
▶
ON
▶
c( )
Notifi cation icon
······ New i-mode mail or SMS
······Missed call
······ Record message
······
Videophone record message
····· The mode has
automatically changed to
eco Mode ( ECO NAVI).
····· 1Seg has automatically
terminated ( ECO NAVI).
Stand-by shortcut
····· i-concier
····· dmarket
·····
地図アプリ (Map Application)
····· Guide
25
Basic Operation
Navigation Displays and Key Operations
Key operations you can perform while you are operating a
function are shown at the bottom of the display. (Navigation
displays)
■Key assignments and basic navigation displays
❶Operations you can perform with the
m key.
❷Operations you can perform with the
l key.
❸
Operations you can perform with the
Oo key.
Directions in which you can scroll
and select items with the Mo key.
❹Operations you can perform with the
i key.
❺Operations you can perform with the
c key.
Operating Command Navigation Key
Vo
Moves the cursor to the
right.
Scrolls forward page by
page. (Hold down to scroll
continuously.)
Zo
Moves the cursor or
highlighted display up. (Hold
down to scroll continuously.)
Scrolls the page up.
Xo
Moves the cursor or
highlighted display down.
(Hold down to scroll
continuously.)
Scrolls the page down.
Oo
Fixes the operation.
Co
Moves the cursor to the left.
Scrolls back page by page.
(Hold down to scroll continuously.)
26
Basic Operation
Menu Operation
Main Menu
Press m from the Stand-by display to show Main Menu.
In this manual, the descriptions of operating procedures are
given mainly starting with the Stand-by display.
Stand-by display Main Menu
Menu icons
Menu icon name
In this manual, the item
names shown here are
described in operating
procedures, etc.
Use Mo to highlight a menu icon and press Oo( ).
Functions categorized by the menu items are displayed.
Repeat selecting items to call up the target function.
You can press r to return to the previous display. When
you press h from any display, the Stand-by display
returns.
See “Function List” for the menu items of each function. (See
page 74)
Simple Menu
Simple Menu is a menu focusing on only basic functions for
easy operation. By setting “シンプルメニュー (Simple menu)”
using the Kisekae tool, you can show the Simple Menu by
pressing m from the Stand-by display.
Some operating procedures or items which appear on the
display in Simple Menu differ from the ones described in this
manual.
Submenu
When “ ” is displayed at the lower left of the display,
you can use functions such as Store, Edit, and Delete by
pressing m.
<Example> Display the submenu of a Phonebook entry
+m
The “ ” is displayed when there are further items under a
particular menu item.
27
Basic Operation
Functions Starting with Simple Operation
Depending on the function, you can start it either by
selecting a menu item or by key operation from the Stand-by
display.
The following are the functions you can start by pressing
keys for at least one second.
Key Performance
OoSets/Releases Keypad Lock.
ZoShows the Registration display for Phonebook entries.
XoStarts i-widget.
cStarts 1Seg.
lExecutes Check mail/message.
iShows the Software list.
dExecutes Start by voice.※
5Sets/Releases eco Mode.
7Sets/Releases Outdoor Mode.
8Switches View Blind on/off.
aActivates/Deactivates Public mode (Drive mode).
sActivates/Deactivates Manner Mode.
x
※This function is available in Japanese mode only.
■Operations while the FOMA terminal is closed
Key Performance
xActivates/Deactivates Manner Mode.
You can easily call up frequently used functions and
telephone numbers which have been registered in multi
one-touch keys.
Although functions have been registered in multi
one-touch keys at purchase, you can change them.
■Registering function
1.
Q, W or E (for at least one second)
▶
Select an item
▶
YES
Changing the registered function
1.
Q, W or E (for at least one second)
▶
YES
▶
Set
▶
Select an item
▶
YES
■Calling up the function
1.
Press Q, W or E.
Multi One-touch Function
28
Basic Operation
docomo Palette UI
The docomo Palette UI is a user interface that allows you to
easily access a variety of functions and services from the
center of the Stand-by display. You can freely customize this
interface.
The MyFACE display appears to the left and right of the
Stand-by display, and the Shortcut display appears below.
MyFACE
display
Stand-by
display
MyFACE
display
Shortcut display
Using MyFACE
MyFACE is a convenient function that allows you to download
MyFACE content from a site and register the content to the
left or right of the Stand-by display. You can then immediately
display the content by pressing No from the Stand-by display.+
1
No
▶
Operate MyFACE content.
You can download MyFACE content from a site and register
the content to the left or right of the Stand-by display.
You can register up to 12 items, including the pre-installed
MyFACE content.
1.
Display a site from which content can be downloaded
▶
Select a MyFACE content
▶
Use No to select a
location
▶
Oo( )
▶
YES/NO
Downloading MyFACE Content
Depending on the MyFACE content, some information might
be updated automatically, and communication is performed
automatically at most once per hour. Packet communication fees
are charged during these updates. (Packet communication fees
are not charged for updates to the pre-installed MyFACE content.)
If you are using international roaming or have changed the i-mode
connection destination settings, packet communication fees are
charged even for updates to the pre-installed MyFACE content.
If some fi les could not be acquired during an update of MyFACE
content, all fi les are re-acquired during the next update, resulting
in packet communication fees being charged again.
29
Basic Operation
Using Shortcut
A list of shortcuts appears at the bottom of the Stand-by
display. By creating shortcuts to, for example, functions you
use frequently, you can use certain functions immediately.
1
Press Xo.
Use No to highlight a Stand-by shortcut
and press Oo( ). You can start the
shortcut.
2
Press Xo.
3
Use Mo to highlight a shortcut and press
Oo( ).
1.
On the display to which you want to create a shortcut,
press m()
▶
Create shortcut
Creating Shortcuts
If you have created a large number of shortcuts, the
shortcut images might be replaced by alternate images.
Using Guide
You can search and check the operating methods of the
functions you want to know and use. You can execute some
functions from “使いかたガイド (Guide)”.
This function is available in Japanese mode only.
1
m
▶
便利ツール (Tool)
▶
使いかたガイド (Guide)
2
Enter a keyword or select a way of
searching.
Stand-by shortcut
30
Basic Operation
Character Entry
You can enter characters on the Registration display for
Phonebook entries or the Composition display for mail
messages, etc.
1
Select a input mode.
Press l( ) to select one of the input modes.
2
Enter characters.
By repeatedly pressing a numeric key, you can enter
other characters assigned to the key.
<Example> When you press 2
Kanji/Hiragana input mode
“か→き→く→け→こ”
Katakana input mode
“カ→キ→ク→ケ→コ→2”
Alphabet input mode (Uppercase)
“A→B→C→a→b→c→2”
Alphabet input mode (Lowercase)
“a→b→c→A→B→C→2”
Numeral input mode
“2”
When a character on the same key comes after a
character such as “あ” and “い”, press Vo to move the
cursor, and enter the next character.
You can press Bo to select one of the prediction
conversion candidates while you are entering the
characters.
3
Convert/fi x characters.
1.
Press No to specify the area to be converted.
2.
Press Bo to move the cursor onto the candidate list.
3.
Press Mo to select a conversion candidate.
4.
Press Oo to fi x the character.
Other key operations
c(): Enter symbols, smileys, or URLs.
i(): Enter pictograms, Deco-mail pictograms, or
Deco-mail pictures.
a: Enter a line feed.
(You can switch between uppercase and lowercase or
enter “゛” and “゜” by pressing this key after you enter a
character.)
d
(for at least one second): Undo the fi xed/erased characters.
r: Clear text.
31
Basic Operation
Sound/Screen Setting
Changing Ring Tone
<Example> Changing the ring tone for incoming voice calls
1
m
▶
Setting
▶
Sound/Vib./Manner
▶
Select ring tone
▶
Phone※
▶
Select ring
tone
▶
Select a type of ring tone
▶
Select
a folder
▶
Select a ring tone.
※To set a ring tone for mail messages, videophone calls,
and so on, select the corresponding item.
Adjusting Ring Volume
<Example> Adjusting the ring volume for incoming voice calls
1
m
▶
Setting
▶
Sound/Vib./Manner
▶
Ring volume
▶
Phone※
▶
Use Bo to
adjust the volume.
※To adjust ring volume for mail messages, videophone
calls, and so on, select the corresponding item.
Setting Vibrator
<Example> Setting the vibrator for incoming voice calls
1
m
▶
Setting
▶
Sound/Vib./Manner
▶
Vibrator
setting
▶
Phone
※
▶
Select a pattern.
※To set a vibrator for mail messages, videophone calls,
and so on, select the corresponding item.
Using Manner Mode
With a single key press, you can set a tone from the FOMA
terminal such as a ring tone, keypad sound, and alarm
sound silent. When you start Manner Mode, not a sound but
the vibration notifi es you of incoming calls or messages.
1
Press and hold s for at least one
second.
“” appears on the Stand-by display.
To release
Perform the same operation.
You can use “Original” to tailor your FOMA terminal to how
it works while Manner Mode is ON.
1.
m
▶
Setting
▶
Sound/Vib./Manner
▶
Manner mode setting
▶
Manner mode set
▶
Original
▶
Set each item
▶
c( )
Using Original
Even in Manner Mode, the shutter tone and focus lock
tone of the camera, and the start/end tones of the voice
recorder sound.
32
Basic Operation
Setting Keypad Sound OFF
1
m
▶
Setting
▶
Sound/Vib./Manner
▶
Other sound setting
▶
Keypad sound
▶
OFF
Changing Display Settings
Changing Stand-by display
1
m
▶
Setting
▶
Screen/Display
▶
Stand-by display
▶
Stand-by display
▶
Select a type of image
▶
Select a folder
▶
Select an image.
You may be able to select a display format depending
on the image.
Changing Display Brightness
You can adjust the brightness of the display. You can also
set to automatically adjust the display brightness according
to the ambient light.
1
m
▶
Setting
▶
Backlight/Illum.
▶
Backlight
▶
Brightness
▶
ON
▶
Press Bo to adjust the brightness.
You can set the display brightness to OFF. You can also set
the time that elapses before Power Saver Mode activates.
Power Saver Mode activates when the time set for “Time
to saver” has elapsed without any operations on the
FOMA terminal. The display turns off to reduce battery
consumption.
1.
m
▶
Setting
▶
Backlight/Illum.
▶
Backlight
▶
Lighting
▶
OFF
▶
Enter the time (seconds) for “Time to saver”.
Lighting off/Power Saver Mode
Making Display Easy to See Outdoors
In order to see the display clearly in a bright surroundings
such as outdoors, you can set “Outdoor mode”.
1
Press and hold 7 for at least one
second.
“” appears.
To release
Perform the same operation.
33
Basic Operation
Making Display Hard to See from People
Around
You can set “View blind” to make it harder for the people
around you to see the display from oblique angles.
1
Press and hold 8 for at least one second.
“ ” appears on the Stand-by display.
To release
Perform the same operation.
Changing Font Size
<Example> Changing the size of all the characters to “X-large”
1
m
▶
Setting
▶
Text display/input
▶
Font
▶
Character size
▶
X-large
Select “Separate setting” when you want to set the
character size of each function separately.
Changing Machi-chara Setting
You can change the Machi-chara image which appears
to inform you of missed calls, new mail messages, new
i-concier information and others.
1
m
▶
Setting
▶
Screen/Display
▶
Machi-chara setting
▶
Display setting
▶
ON
▶
Select a folder
▶
Highlight a
Machi-chara image and press c().
Using Kisekae Tool
You can set the ring tone, Stand-by display, menu icons and
others at a time.
1
m
▶
Setting
▶
Screen/Display
▶
Kisekae Tool setting
▶
Select a folder
▶
Highlight a Kisekae Tool fi le and press
c()
▶
YES
Some menu confi gurations change according to the
usage frequency depending on the type of the menu.
1.
m
▶
m( )
▶
Reset menu screen
▶
Enter your
Terminal Security Code
▶
YES
Reset Menu Icons to Default
Changing Illumination When Receiving
<Example> Changing call Illumination for voice calls
1
m
▶
Setting
▶
Backlight/Illum.
▶
Illumination setting
▶
Illumination in
call
▶
Illumination
▶
Phone※
▶
Select an
illumination.
※To set illumination such as for mail messages and
videophone calls, select the corresponding menu.
34
Basic Operation
Switching to the eco Mode
With a single key press, you can set the eco Mode that reduces
battery consumption. Changing to eco Mode affects items
specifi ed in “eco mode setting”, e.g. dimming the display.
1
Press and hold 5 for at least one second.
“ ” appears.
To release
Perform the same operation.
eco Mode Setting
You can set the items for reducing battery consumption for
when the eco Mode activates.
1
m
▶
Setting
▶
Battery
▶
eco mode
setting
▶
Put a check mark for items to
be set
▶
c( )
eco Mode Autostart
This setting ensures that the mode will be automatically
set to the eco Mode when the remaining battery level has
dropped to the set level or less.
“Battery level” of “eco mode autostart” is set to “40%” in
default.
When the “eco mode autostart” is set to “ON”, “ (gray)”
will be displayed. When the mobile phone automatically
switches to eco Mode, “ ” will be displayed and “ ” will
be displayed on the desktop.
1
m
▶
Setting
▶
Battery
▶
eco mode autostart
▶
ON
▶
Set each
item
▶
c( )
Lock/Security
Various Security Codes
■Caution on security codes
You should avoid using the numbers for security codes
such as denoting your birth date, part of your phone
number, local address number, room number, “1111” or
“1234” that is easily decoded by a third party. Also make
sure that you take a note of the security codes you have
set just in case you forget them.
Take care not to let others know your security codes. Even
if your security codes are known and used by a third party,
we at DOCOMO take no responsibility in any event for the
resultant loss.
If you do not remember your respective security codes,
you need to bring an identifi cation card such as your
driver’s license, the FOMA terminal and docomo mini UIM
card to the handling counter of a docomo Shop.
For details, contact “docomo Information Center” on the
back page of this manual.
The PIN unblocking key (PUK) is described on the
application form (your copy) that is handed over to you at
a docomo Shop at the time of contract. If your contract
has been made at a shop other than a docomo Shop,
you need to bring an identifi cation card such as your
driver’s license, and the docomo mini UIM card to the
handling counter of a docomo Shop, or consult “docomo
Information Center” on the back page of this manual.
35
Basic Operation
“0000” at purchase
Terminal Security Code
This is a four-to-eight digit number for deleting all fi les or
changing settings. When the display for entering the
Terminal Security Code appears, enter your four-to-eight
digit code and press Oo( ).
To change
1.
m
▶
Setting
▶
Lock/Security
▶
Change security code
Determining at the time of contract
Network Security Code
This is a four-digit number required for your identifi cation
when you place an order at a docomo Shop, docomo
Information Center, or “お客様サポート (User support)” site,
or when you use respective network services.
“お客様サポート (User support)” is available in Japanese only.
To change
From i-mode, you can change your Network Security Code by
selecting “iMenu”→“お客様サポート (User support)”→
“各種設定（確認・変更・利用） [Respective settings
(Confi rmation/Change/Use)]”→“ネットワーク暗証番号変更
(Change Network Security Code)”.
“0000” at the time of your contract
i-mode Password
This is a four-digit number required for registering/deleting
My Menu, applying for/canceling Message Services or
i-mode pay services, etc.
To change
From i-mode, you can change your i-mode password by
selecting “iMenu”→“English”→“Options”
→“Change i-mode Password”.
“0000” at the time of your contract
PIN1 Code/ PIN2 Code
For the docomo mini UIM card, you can set two security
codes, namely the PIN1 code and PIN2 code.
The PIN1 code is a four-to-eight digit number for checking
the user each time the docomo mini UIM card is inserted
into the FOMA terminal or each time the FOMA terminal is
turned on, to prevent the unauthorized use by a third party.
The PIN2 code is a four-to-eight digit number for executing
Reset Total Charge, etc.
When the PIN1 Code/PIN2 Code entry display appears,
enter your four-to-eight digit PIN1 code/PIN2 code and
press Oo().
If you enter a wrong PIN1 code/PIN2 code three times in
succession, the FOMA terminal locks and cannot be used.
To change
1.
m
▶
Setting
▶
Lock/Security
▶
UIM setting
▶
Enter your
Terminal Security Code
▶
Change PIN1 code or Change
PIN2 code
You need to set “PIN1 code entry set” to “ON” to change
the PIN1 code in advance.
36
Basic Operation
PIN Unblocking Key (PUK)
The PIN unblocking key (PUK) is the eight-digit number for
releasing the blocked PIN1 code and PIN2 code.
You cannot change this code by yourself.
If you enter a wrong PIN unblocking key (PUK) 10 times in
succession, the docomo mini UIM card is locked. In that
case contact one of docomo Shops.
PIN1 Code Entry Set
You can set the FOMA terminal not to work unless you enter
your PIN1 code when turning on the power.
1
m
▶
Setting
▶
Lock/Security
▶
UIM setting
▶
Enter your Terminal
Security Code
▶
PIN1 code entry set
▶
ON
▶
Enter the PIN1 code.
To release
Select “OFF”.
Various Lock Functions
A variety of lock functions is installed on your FOMA terminal
such as preventing illegal use of a third party, or protecting
your private information.
Dial Lock You can set your FOMA terminal not to be
used by a third party.
You can do no operations other than
answering calls and turning on/off the power.
1.
m
▶
Setting
▶
Lock/Security
▶
Lock
▶
Enter your Terminal Security Code
▶
Dial lock
To release, enter your Terminal Security Code
from the Stand-by display.
Omakase
Lock
When you have lost your FOMA terminal or in
other cases, you can lock your personal data
(such as Phonebook entries) by contacting
DOCOMO
■Setting/Releasing Omakase Lock
0120-524-360 (In Japanese only)
Business hours: 24 hours (open all year round)
※Unavailable from some IP phones.
You can set/release also from the My docomo site
via your personal computer or other devices. (In
Japanese only)
37
Basic Operation
Original
Lock
You can lock functions which utilize personal
information such as Phonebook entries or
schedule events.
1.
m
▶
Setting
▶
Lock/Security
▶
Lock
▶
Enter your Terminal Security Code
▶
Select a level for Original Lock.
To release, select “OFF”.
Keypad
Lock
Key operations are disabled.
1.
Press and hold Oo for at least one second.
To release, perform the same operation.
Setting Incoming Call Restriction
You can set whether to receive (accept) or not to receive
(reject) incoming calls depending on the reason, such as
from the parties which has not been registered in Phonebook
or incoming calls from any parties who do not notify you of
their phone numbers. There are three reasons for no caller
ID; “User unset”, “Payphone”, and “Unknown”.
1
m
▶
Setting
▶
Lock/Security
▶
Call rejection set.
▶
Enter your Terminal
Security Code
▶
Select an item to be set
▶
Accept or Reject
If you select “Accept” for “User unset”, “Payphone” or
“Unknown”, you can set a ring tone or call receiving
display.
Resetting to Default
Resetting the Function Settings to Default
You can reset the items on “Function List”, which are
indicated by . (See page 74)
The items indicated by might include the functions
which do not return to their default settings or state.
1
m
▶
Setting
▶
Other setting
▶
Reset settings
▶
Enter your Terminal
Security Code
▶
YES
Deleting Stored Data at Once
You can delete all the stored files together and each function
setting will return to the default.
1
m
▶
Setting
▶
Other setting
▶
Initialize
▶
Enter your Terminal Security Code
▶
YES
▶
YES
38
Connect
Call Telephone
Making a Call/Videophone Call
Making a Call by Entering the Phone Number
1
Enter a phone number starting with a
city code
▶
Press d to make a call
▶
Press h to end the call.
Press c() to make a videophone call.
You can put a call on hold by pressing r during
a call. You can release held call by pressing r.
This FOMA terminal has no inward-facing camera.
Therefore, the image sent to the other party is a Chara-den
image, still image, or image being shot by the
outward-facing camera.
Making a Call from Phonebook
<Example> Search a Phonebook entry by the name stored
in Phonebook
1
Zo
▶
Search name※
▶
Enter a part of the
name
▶
Bo
※You can use another search method such as “Search
phone No.”, and “Search e-mail”.
If you enter nothing and press Bo; then you can display
all Phonebook entries.
2
Select a Phonebook entry
▶
d
When an entry contains multiple phone numbers,
press No to select a desired phone number.
Press c() to make a videophone call.
Making a Call with Dial/Received List
1
Co
▶
Select a call record
▶
d
Press c( ) to make a videophone call.
Using Koe-no-Takuhaibin
This service keeps voice message on behalf of you.
For details, refer to the DOCOMO website.
1
Enter a phone number
▶
l( )
▶
Operate following the voice guidance.
Koe-no-Takuhaibin message can be sent from a
Phonebook entry or Dial/Received List as well.
When Koe-no-Takuhaibin message has been received, an
SMS message is given as notice of recording. Select “再生
(Play)” on the detailed display of the SMS message to play
back the received message.
You can also play back messages by following the
operation below:
“m
▶
TEL function
▶
Koe-no-Takuhaibin
▶
Message confi rm(voice)”.
Playing Back Messages
39
Connect
Making an International Call
You can use WORLD CALL to make an international call from
Japan.
Contact “docomo Information Center” on the back page of
this manual for inquiries about details on WORLD CALL.
When using international carriers other than DOCOMO,
contact them.
1
0 (for at least one second)
▶
Enter numbers in order of country code
→area code (city code)
→destination phone number.
You can enter “+” by pressing and holding 0 for at
least one second.
When the area code (city code) begins with “0”, enter
the area code without “0” at the beginning. However,
include “0” when making a call to some countries or
regions such as Italy.
2
d
▶
Dial
Press c() to make a videophone call.
DOCOMO videophones conform to “3G-324M
standardized by the international standard 3GPP”. You
cannot connect to the videophone using a different format.
Receiving a Call/Videophone Call
1
A call comes in
▶
Press d to answer the
call
▶
Press h to end the call.
When a videophone call comes in
You can receive the videophone call the same way as with
a voice call. The substitute image is sent to the other party.
Adjusting Earpiece Volume
1
Press Bo to adjust the earpiece volume
during a call.
When You cannot Answer a Call
Activate Record Message
You can record a caller’s voice/video message when you
cannot answer the call.
When a call comes in, an answer message is played back
after the ring time elapses. Then, the caller’s voice is
recorded with audio or video.
1
m
▶
TEL function
▶
Rec. msg./Voice
memo
▶
Record message setting
▶
ON
▶
Phone※
▶
Select an answer message
▶
Enter a ring time (seconds).
※To activate Record Message for videophone calls, select
“Videophone”.
40
Connect
Using Public Mode (Drive Mode)
Once you activate Public mode (Drive mode), the guidance
is played back telling that you cannot answer the call as you
are currently driving or in a public place (such as a train, bus
or movie theater) where you should refrain from speaking on
the phone. Then, the call is disconnected automatically.
1
Press and hold a for at least one
second.
“” appears on the Stand-by display.
To deactivate
Perform the same operation.
When a call comes in during Public mode (Drive mode),
the ring tone does not sound and the record is stored in
“Received calls”. The alarm does not sound even when the
specifi ed alarm time comes.
Using Public Mode (Power Off)
Once you activate Public mode (Power off), when the FOMA
terminal’s power is OFF, the guidance is played back telling
that you cannot answer the call as you are currently in a public
place (such as a hospital, airplane or near a priority seat on
a train) where you are required to turn off the power of the
FOMA terminal. Then, the call is disconnected automatically.
1
Enter a25251
▶
d
To deactivate
1.
Enter a25250
▶
d
Using Various Network Services
■Network services available
The following are the DOCOMO network services available
for the FOMA terminal.
Service Application
Monthly fee
Voice Mail Service Required Charged
Missed Call Notifi cation Service
Not required
Free
Call Waiting Service Required Charged
Call Forwarding Service Required Free
Nuisance Call Blocking Service
Not required
Free
Caller ID Notifi cation Service
Not required
Free
Caller ID Display Request Service
Not required
Free
English Guidance
Not required
Free
Multi Number Required Charged
2in1 Required Charged
Public mode (Drive mode)
Not required
Free
Public mode (Power off)
Not required
Free
Melody Call Required Charged
Koe-no-Takuhaibin
Not required
Free
The network services are not available when you are out of the
service area or out of reach of radio waves.
“Deactivate” does not mean that the contract for Voice Mail Service,
Call Forwarding Service or other services is canceled.
The outlines of the each network service in this manual are
described along with the menus of the FOMA terminal. For details
on the network services, refer to DOCOMO website.
For subscriptions and inquiries, contact “docomo Information
Center” on the back page of this manual.
41
Connect
Using Voice Mail Service
1
m
▶
TEL function
▶
Voice mail service
To activate the service
1.
Activate
▶
YES
You can also specify a ring time.
To play back the message
1.
Play messages
▶
Play (voice call) or Play (videophone)
▶
YES
▶
Operate following the voice guidance.
Using Call Waiting Service
1
m
▶
TEL function
▶
Other network serv.
▶
Call waiting
To activate the service
1.
Activate
▶
YES
Press d. Each time you press d, you can switch the
parties you can talk with.
Answer an Incoming Call during a Call
Using Call Forwarding Service
1
m
▶
TEL function
▶
Other network serv.
▶
Call forwarding
To activate the service
1.
Activate
▶
Activate
▶
YES
You can set the phone number of forwarding destination
or ring time as well.
42
Connect
Emergency Call
Emergency Calls Phone number
Calls to police 110
Calls to fire station and ambulance 119
Calls for accidents at sea 118
This FOMA terminal supports “Emergency Location Report”. When
you make an emergency call such as at 110/119/118, information
about the place where you are dialing from (location information)
is automatically notified to emergency-response agencies such
as police stations. It might happen that your correct location is
not detected by emergency-response agencies depending on
the location you dial from or radio wave conditions. When you do
not notify your phone number such as by adding “184” by every
call, your location information and phone number are not notified.
However, when an emergency-response agency has judged that
the location information and phone number should be detected
because of emergency priority such as for protection of human
life, it might get location information and phone number regardless
of your setting. Areas and timing “Emergency Location Report”
introduced vary depending on the preparation of respective
emergency-response agencies.
When you make a call at 110/119/118 from the FOMA terminal,
tell an operator that you are calling from a mobile phone and let
them know your phone number, and then clearly tell where you are
currently around, so that police/fire station can make a confirmation
call to your mobile phone. In addition, stay at the current location
while talking preventing the call from being disconnected. Do not
turn off the power immediately, and make sure to place your phone
standby for at least 10 minutes after the call.
You might not be connected to regional police/fire station depending
on the area where you are calling from.
When using the videophone function of the FOMA terminal to place
an emergency call to 110, 119 or 118, the call will automatically be
made as a voice call.
Using Overseas
International Roaming (WORLD WING) is a service that
allows you to use the FOMA terminal with the phone number
and mail address you use in Japan, in a service area of the
overseas carrier partnered with DOCOMO. It enables you to
continue using the voice call, SMS and i-mode mail settings
without having to make any changes.
Concerning the areas where the service is supported:
This FOMA terminal is the class 2. This FOMA terminal is
available within the service area of 3G network, and in the
countries/regions supporting 3G 850MHz. Check the areas
where you can use the service.
Refer to the following before you use this FOMA terminal
overseas:
・ “Mobile Phone User’s Guide [International Services]”
・ DOCOMO International Services website
For the country codes, international call access codes,
international prefix numbers for the universal number, and
connectable countries, regions, and overseas carriers,
refer to “Mobile Phone User’s Guide [International
Services]” or the DOCOMO International Services website.
A fee charged for overseas use (call fee, packet
communication fee) differs from that of in Japan.
43
Connect
Available Service Overseas
Major Communication Service 3G
Voice call※1○
Videophone call※1○
SMS※2○
i-mode※3○
i-mode mail ○
i-channel※3※4○
i-concier※5○
i-Widget※6○
Packet communication by connecting with a personal
computer ○
○: Available
※1 When using 2in1, you cannot make calls using your B number.
When using Multi Number, you cannot make calls using an
additional number.
※2 If the destination is a FOMA terminal, enter the other party’s
phone number as you do in Japan.
※3 You need to establish i-mode International Settings.
※4 You need to establish i-channel International Settings. You are
charged a packet communication fee for automatically updating
the “ベーシックチャネル (Basic channel)” information as well
(which, in Japan, is included in the i-channel fee).
※5
You need to establish i-concier International Settings. You are charged
a packet communication fee for each information you receive.
※6 You need to establish i-Widget International Settings. When you
show an i-Widget display, multiple Widget Appli programs might
start communication. In that case, you are charged a packet
communication fee for each communication.
Some services are not available depending on the overseas carrier
or network.
Making a Call to Outside the Country You Stay in
1
0 (for at least one second)
▶
Enter numbers in order of country code
→area code (city code)
→destination phone number.
You can enter “+” by pressing and holding 0 for at
least one second.
Enter “81” as a country code when you make an
international call to Japan.
When the area code (city code) begins with “0”, enter
the area code without “0” at the beginning. However,
include “0” when making a call to some countries or
regions such as Italy.
2
Press d to make a call.
Press c() to make a videophone call.
Making a Call in Country You Stay
1
Enter a phone number
▶
Press d to
make a call.
Press c( ) to make a videophone call.
Making a Call to WORLD WING User Overseas
When you make a call to a person who is also internationally
roaming, make the call the same way as to make
international calls to Japan even if he/she is in the country
you stay at.
44
Connect
Mail
Sending i-mode Mail
Once you subscribe to i-mode, you can exchange e-mail
messages over the Internet. You can attach within 2 Mbyte
of up to 10 fi les (photos, moving pictures, etc.) with body
text added. For details on i-mode mail, refer to DOCOMO
website.
1
l
▶
l( )
▶
Enter each item.
Enter a destination
(mail address).
Enter a subject.
Enter text.
Select a fi le such
as an image.
2
Press c( ).
Sending Deco-mail
You can change the color or size of characters or
background color, or insert images or Deco-mail pictograms.
1
l
▶
l( )※
▶
Enter an address
and subject.
※You can also select “Decome-Template” to create
Deco-mail.
2
Select the text fi eld
▶
d
▶
Select one of decorations
from the palette
▶
Enter text
▶
Oo( )
When the text fi eld is selected, the
prediction conversion candidates
appear. Press r to close the
conversion candidate display, and
then press d to display the palette.
(In Japanese mode only) Palette
3
Press c( ).
45
Connect
Sending Decome-Anime
You can create impressive messages by inserting text or
images into a Flash fi le.
1
l
▶
Create new Deco-Anime
▶
Enter an address and subject.
2
Select the text fi eld
▶
Highlight a
Decome-Anime template and press
c()
▶
Edit characters and images
▶
c( )
3
Press c( ).
Displaying Received i-mode Mail
1
l
▶
Inbox
▶
Select a folder
▶
Select an i-mode mail message.
Replying to i-mode Mail
1
Press c( ) while an i-mode mail is
displayed
▶
Enter each item
▶
c( )
1.
m() while an i-mode mail is displayed
▶
Reply/Forward
▶
Forward
▶
Enter each item
▶
c( )
Forwarding i-mode Mail
Checking New i-mode Mail
You can check the i-mode Center for a new mail message or
Message R/F.
1
Press and hold l for at least one second.
Sorting i-mode Mail
You can use “Auto-sort” to sort received/sent i-mode mail
messages into a folder such as “Business” or “Friend” which
has been created in advance.
<Example> Sorting mail messages, which come from the
address stored in the Phonebook, into a folder
1
Highlight a folder from Inbox Folder list
and press m()
▶
Auto-sort
▶
Address sort
▶
Look-up address
▶
Phonebook
▶
Look up for Phonebook
entries and select a target i-mode mail
address.
46
Connect
Early Warning “ Area Mail”
Receiving Area Mail
You can receive information such as about earthquake alerts
that are issued from the Japan Meteorological Agency as an
Area Mail message.
When an Area Mail message arrives, “ ” lights and the
buzzer or ring tone for Area Mail sounds.
The received contents of some messages are automatically
displayed. To erase the displayed content, select “OK”.
You can receive Area Mail messages even when you are not
contracted to use i-mode.
You can receive Earthquake Early Warnings, Disaster/
Evacuation information or Tsunami Warnings at the
purchase.
(Tsunami Warnings are received as Disaster/Evacuation
information.)
Setting Area Mail
1
l
▶
Mail setting
▶
Area Mail setting
▶
Select an item to be set
▶
Set each setting.
You can also check “Check ring tone” for how your
FOMA terminal works when you receive an Area Mail
message.
Using SMS
You can send text messages to the mobile phone number at
the other party.
Sending SMS
1
l
▶
Compose new SMS
▶
Enter each
item.
Enter a phone number.
Enter text.
2
Press c( ).
Displaying Received SMS Message
1
l
▶
Inbox
▶
Select a folder
▶
Select an SMS message.
47
Connect
Phonebook
Storing Phonebook Entries
Storing New Phone Numbers/Mail
Addresses, etc.
You can store Phonebook entries in the FOMA terminal
(Phone) or on the docomo mini UIM card.
1
Zo (for at least one second)
▶
Phone
The display for entering a name appears. Enter a name
and proceed.
When storing entries onto the docomo mini UIM card
Phonebook
Select “UIM”.
2
Enter each item.
Enter a name.
Enter a reading.
Enter a phone number.
Enter a mail address.
3
Press c( ).
Storing Phonebook Entries from Dial/
Received List
1
Co
▶
Highlight a call record and press
m()
▶
Add to phonebook
▶
Phone
▶
New
▶
Enter each item
▶
c( )
Editing Phonebook Entries
1
Zo
▶
Search and select a Phonebook
entry
▶
m( )
▶
Edit phonebook
▶
Select an item to be edited
▶
Edit the contents
▶
c( )
▶
YES
Deleting Phonebook Entries
1
Zo
▶
Search and select a Phonebook
entry
▶
m( )
▶
Delete data
▶
Delete this
▶
YES
48
Search
i-mode/Full Browser
Displaying i-mode Sites
i-mode is a service that enables you, by using the display of
the mobile phone supporting i-mode, to use online services
such as site access, Internet access, and i-mode mail.
i-mode is a pay service that is available on a subscription
basis.
For details on i-mode, refer to DOCOMO website.
You can display SSL/TLS※-compatible pages via FOMA
terminal.
※SSL/TLS are the safer data communication systems using
authentication/encryption technology to protect your
privacy.
1
Press i.
You can access the iMenu. Repeat
selecting items (links) to display the
desired site.
While you are online, “ ” blinks.
iMenu is available in English. Select
“English” from the display on the right.
■Before using i-mode
Content of sites or websites is in general protected by
copyrights law. You can use data such as text and images
for your entertainment, which you download to your mobile
phone supporting i-mode, but you cannot use them, part
or whole of it as is, or modify them for the purpose of sale
or redistribution, without approval from copyright holders.
If you replace the docomo mini UIM card with another one
or turn on the power without docomo mini UIM card, you
cannot display/play back fi les, such as still images/moving
pictures/melodies you download from sites, attached fi les
(still images/moving pictures/melodies and other fi les)
sent/received by mail, Screen Memo, and Messages R/F.
When the fi le has been set for the Stand-by display or
for specifi ed ring tone, of which display or playback is
restricted by the docomo mini UIM card, the settings
return to default if you replace it with new one or turn on
the power without docomo mini UIM card.
49
Search
Displaying Websites Designed for PC
You can browse Internet websites designed for PCs using
the Full Browser function.
Note that you are charged a high communication fee for
the massive data communication such as browsing Internet
websites having many images or downloading data. For
details on the packet communication fee, refer to DOCOMO
website.
You can browse Internet websites composed of frames. You
can select a frame to display it as well.
1
m
▶
imode/web
▶
Full Browser Home
By default, a confi rmation display appears asking
whether you want to use Full Browser.
You might not correctly display some Internet websites.
Switching Browsers
You can switch to Full Browser to show the Internet websites
incorrectly displayed by i-mode.
The billing system differs between i-mode and Full Browser.
With the latter, as packet communications fee will be a large
sum, you are advised to use i-mode packet fl at-rate service.
1
m( ) while the website is
displayed by i-mode
▶
Full Browser
▶
Switch to FB
▶
YES
To switch from Full Browser to i-mode
1.
m() while the website is displayed by
Full Browser
▶
imode Browser
▶
Switch to imode
Viewing and Operating Sites
Scroll display/Move highlighted/
Move the pointer: Mo
Select an item (link): Oo()
Return to previous page: l()
Forward to next page: i()
“ ” or “ ” appears while
accessing by Full Browser. Pointer
50
Search
Storing Frequently Accessed Sites
Bookmark websites or i-mode sites you frequently visit to
get them displayed easily.
1
m( ) while the site is displayed
▶
Bookmark
▶
Add bookmark
▶
OK
▶
Select a destination folder.
To access a site stored in Bookmark
1.
m
▶
imode/web
▶
Bookmark
▶
Select a folder
▶
Select a bookmark.
Saving Site Contents
If you save the page once you visited as a screen memo,
you can easily refer to it without connecting to i-mode.
1
m( ) while the site is displayed
▶
Screen Memo
▶
Save screen memo
▶
Phone
▶
YES
To display a saved screen memo
1.
m
▶
imode/web
▶
Screen Memo
▶
Phone or microSD
▶
Select a screen memo.
Depending on the site, for instance, when saving of screen
memos is disabled at the site, you may not be able to save
screen memos properly.
i-channel
This service distributes information such as news and weather
forecast to i-channel mobile phones. The automatically
received latest information fl ows on the Stand-by display by
tickers. You can read it on the i-channel list by pressing *r.
Further, two types of channels, “ベーシックチャネル (Basic
channel)” provided by DOCOMO and “おこのみチャネル
(Optional channel)” provided by IPs (Information Providers)
are available. You are not charged a packet communication
fee for auto-updates of “ベーシックチャネル (Basic channel)”
information.
You are charged a packet communication fee for auto-updates
of “おこのみチャネル (Optional channel)” information that will
be available by registering your favorite channels. Note that
you are charged separately a packet communication fee for
browsing detailed information for both “ベーシックチャネル
(Basic channel)” and “おこのみチャネル (Optional channel)”.
When you use the international roaming service, you are
charged a packet communication fee for both auto-update
and browsing detailed information.
i-channel is a pay service which is available on a subscription
basis (You need to subscribe to i-mode to apply for i-channel).
For details on i-channel, refer to DOCOMO website.
The i-channel service is provided in Japanese only.
Displaying i-channel
1
Press r.
Select each channel to browse its detailed information.
51
Enjoy
Camera
Viewing and Operation of Finder Display
For Digicam mode
❶
❸
❹
❺ ❻
❷
❷
❶MENU
You can check the settings.
❷Key operation guidance
❸Focus frame
When a subject is focused on,
the frame becomes green.
❹Zoom bar
The zooming status is
displayed.
❺ The setting of Image
stabilizer
❻ The number of remaining
recordable still images
Operations for shooting
Shoot/Save still image: Oo
Focus function: Xo
Zoom: Vo(TELE)/Co(WIDE)
You may not be able to zoom depending on the selected
image size.
Shooting Still Images/Moving Pictures
Shooting Still Images
1
m
▶
CAMERA/TV/MUSIC
▶
Camera
▶
Digicam mode
2
Oo( )
▶
Oo( )
Shooting Moving Pictures
1
m
▶
CAMERA/TV/MUSIC
▶
Camera
▶
Movie mode
2
Press Oo( ) to start recording
▶
Press Oo( ) to end the recording
▶
Oo( )
Do not leave the FOMA terminal with the lens pointing to
direct sunlight. Pixels may be discolored or burns may
result.
When the battery level is low, you may not be able to save
still images/moving pictures you shoot.
52
Enjoy
Viewing Still Images/Moving Pictures
after Shooting
You can display the still image or the moving picture you
have shot in Picture Album. You can detect a person’s face
on the still image you have shot and expand it. You can also
play expressive slide shows with the effect function.
1
m
▶
Data box
▶
My picture or imotion/
Movie
▶
Picture album
Picture Album is also activated by pressing l( )
from the Finder display.
2
Select a folder
▶
Select a fi le.
To play a moving picture, press Oo( ).
Shooting in Various Ways
Continuous Shooting Still Images
You can continuously shoot still images within the sizes from
WQVGA (240 x 428) to VGA (480 x 640).
1
m( )
from the Finder display for
Digicam Mode
▶
Burst Shoot
▶
Continuous
2
Press Oo( )
▶
Highlight a still image
and press Oo( ).
You can save all the shot images by pressing c( ).
Shooting Still Images Using Auto Timer
1
m( ) from the Finder display for
Digicam Mode
▶
Auto timer
▶
10 seconds
or 2 seconds
2
Press Oo( ).
The still image is shot after 2 seconds or 10 seconds.
3
Press Oo( ).
When shooting moving pictures using Auto timer
1.
m() from the Finder display for Movie Mode
▶
Auto timer
▶
2Sec. or 10Sec.
2.
Press Oo( ).
Recording is started after 2 seconds or 10 seconds.
3.
Press Oo( ) to end the recording
▶
Oo( )
53
Enjoy
1Seg
Using 1Seg
■Using 1Seg
1Seg is a service provided by television entrepreneurs
(broadcasting stations). You are not charged a
communication fee for receiving video and audio. For about
fee charged by NHK, contact NHK.
※You are charged a packet communication fee for browsing
“Data broadcasting site” and “i-mode site”. You might be
charged an information fee for using some sites (i-mode
pay sites).
※For details on the 1Seg service, browse the following
websites:
The Association for Promotion of Digital Broadcasting
From personal computer: (http://www.dpa.or.jp/english/)
From i-mode: (http://www.dpa.or.jp/1seg/k/) (In Japanese
only)
■Broadcasting waves
1Seg is one of the broadcasting services receiving radio waves
(broadcasting waves) different from that used for the FOMA
services.
Reception condition might be deteriorated or you might not
be able to receive 1Seg broadcast in places as follows:
Places far away from radio towers that transmit
broadcasting waves
Mountain-ringed regions or behind buildings
In tunnels, underground, or recesses of buildings
※Channels might be reorganized along with the
discontinuation of analog broadcasting. For this reason,
you might need to reset the channels by using an
automatic scan (see page 54). After resetting the channels,
be sure to register the channels to the channel list. For
details about channel changes accompanying terrestrial
digital broadcasting, check resources such as the
following website:
Ministry of Internal Affairs and Communications Television
Receiver Support Center (Digital Support) Channel Changes
Call Center (In Japanese only)
Phone number： 0120-922-303
Personal computer： (http://www.digisuppo.jp/repack/)
ｉ
-mode: (http://digisuppo.jp/m/index.php)
■Battery level
If you try to start 1Seg when the battery is low, the battery
alert tone sounds, and a confi rmation display appears asking
whether to start it. When you do nothing on the confi rmation
display for about one minute, 1Seg automatically terminates.
■Messages on the display when you use 1Seg for the fi rst time
When you use 1Seg for the fi rst time after purchase, the
Exemption Clause Confi rmation display appears.
If you select “NO” on a confi rmation display which appears
after pressing *Oo(), the same confi rmation display
does not appear afterward.
54
Enjoy
Setting Channels
When you activate 1Seg for the fi rst time or change the area
you are in, you need to operate “Channel setting”. Select
“Auto channel setting” to enable you to search automatically
for broadcast stations you can watch.
You need to set this function when you are in a terrestrial
digital TV broadcasting service area.
1
m
▶
CAMERA/TV/MUSIC
▶
1Seg
▶
Channel setting
▶
Auto channel setting
▶
YES
▶
YES
▶
Enter a title.
To execute Channel Setting by selecting an area
1.
m
▶
CAMERA/TV/MUSIC
▶
1Seg
▶
Channel setting
▶
Select area
▶
Select an area
▶
Select a prefecture
▶
YES
Watching 1Seg
1
Press and hold c for at least one
second.
1Seg starts and the viewer display appears.
Viewing and Operating Viewer Display
❶
❷
❸
❹ ❺ ❻ ❼
❽
❾
❶Video ❷Caption
❸Data Broadcasting
❹Program’s name
❺Switch Visual Image/Caption
❻ Displayed while you are
watching a 1Seg program
❼Video being recorded
❽Operation Mode
： Video Mode
：
Data Broadcasting Mode
❾ Displayed while setting 1Seg
Op-free Auto Off
Starts fl ashing approximately
one minute before automatic
termination.
Channel (Remote-control
number)
When a broadcasting station is
broadcasting multiple services
(programs), “Viewing service
number/Number of all services”
is also displayed.
Airwave Reception Level
(estimate)
Strong Weak
“” appears out of the
broadcasting area.
Displayed while receiving
caption information
Sound Volume
55
Enjoy
The operation on the viewer display
Channel switch: No Sound volume adjustment: Bo
Mute/Unmute: r Switch TV/data BC: l
Video recording: O o() (for at least one second) or
x (for at least one second)
The recorded video is saved on the microSD card.
Setting Timer Watching or Recording
1Seg
Set the date and time, a channel, and program name,
and enter them to the TV Timer List or Timer Recording
List. When the set time arrives, you can start watching or
recording.
1
m
▶
CAMERA/TV/MUSIC
▶
1Seg
▶
TV timer list or Timer recording list
▶
c( )
▶
Enter each item
▶
c( )
Playing Recorded Video
1
m
▶
Data box
▶
1Seg
▶
Video
▶
Select a fi le.
Music
Saving WMA File
You can save Windows Media® Audio (WMA) fi les from a
personal computer to the microSD card.
For details on MUSIC Player, refer to DOCOMO website.
1
Connect the personal computer and the
FOMA terminal by using the FOMA USB
Cable with Charge Function 02 (option).
2
m
▶
Setting
▶
External connection
▶
USB mode
▶
MTP mode
3
Start Windows Media Player 10/11/12 and
save WMA fi les to the microSD card.
56
Enjoy
You cannot save WMA fi les to the FOMA terminal.
A license protected WMA fi le cannot be saved to the
FOMA terminal or the microSD card.
For how to operate Windows Media Player 10/11/12, refer
to Help for Windows Media Player 10/11/12.
When you fi nish saving, remove the FOMA USB Cable with
Charge Function 02 from the FOMA terminal.
When you remove the FOMA USB Cable with Charge
Function 02, remove it after fi nishing the software in use.
■Handling music fi les
You can use music fi les saved on the microSD card for
personal use only. Before using, give enough consideration
not to infringe on the third party’s intellectual property rights
or other rights such as copyright.
Playing Music Files
MUSIC Player enables you to play Chaku-uta Full® music
fi les you have downloaded from sites, or to play WMA
fi les you saved on the microSD card using your personal
computer.
“Chaku-uta Full” is a registered trademark of Sony Music
Entertainment Inc.
1
m
▶
CAMERA/TV/MUSIC
▶
MUSIC Player
▶
All music
▶
Select a music fi le.
Operations of MUSIC Player display
Halt: c()
Pause: Oo()
Search (fast forward): Press and hold Vo
Search (fast rewind): Press and hold Co
Sound volume adjustment: Bo
Replay next fi le: Vo
Replay previous fi le: Co (When playback time is over
three seconds, you go back to the
beginning of the fi le.)
57
Enjoy
i-αppli/i-Widget
i-αppli is a software program for mobile phone supporting i-mode.
By downloading various software programs from the i-mode
site, you can use your FOMA terminal more conveniently. You
can automatically update the stock price information or weather
information, and enjoy games without accessing network.
i-Widget is a useful function for gaining easy access to
frequently used contents and tools (Widget Appli programs)
such as the calculator, clock, memo pad and stock market
information. Widget Appli programs can be added by
downloading them from the web site.
Depending on the i-αppli program, you might be charged
a communication fee for using.
The packet communication fee for overseas use differs
from the one for domestic use.
A multiple number of Widget Appli programs may start
communicating when you open the i-Widget display. If you
browse detailed information, you are charged separately a
packet communication fee.
For details on i-αppli/i-Widget, refer to DOCOMO website.
Starting i-αppli
1
i (for at least one second)
▶
Select a software program.
Starting Widget Appli
1
Xo (for at least one second)
▶
Select a Widget Appli program.
You can operate Widget Appli program separately.
Downloading i-αppli from Sites
1
Select a software program from a
downloadable site
▶
Select “OK” when
downloading ends
▶
YES
You can delete the pre-installed i-αppli programs. You can
re-download deleted programs from the “P-SQUARE” site.
You can download not only i-αppli programs but also the
pre-installed Deco-mail pictograms, Kisekae Tool files,
Machi-chara images, Chara-den images, templates,
dictionaries, and Content packages from the “P-SQUARE”
site (in Japanese only).
iMenu→メニューリスト (Menu List)→ケータイ電話メー
カー (Mobile Phone Maker)→P-SQUARE
Deadlines for re-download services
・“リバーシ (REVERSI)”: the end of September, 2017
・“ハイパー四川省 (Hyper Sichuan)”: the end of September,
2017
The re-download services may be halted or closed without
notice even in the service period.
58
Enjoy
i-motion
i-motion is a file consisting from video, audio, and music
which you can download to your FOMA terminal from
i-motion sites that support i-motion. You can also set it for a
ring tone.
When downloading or streaming an i-motion file, you might
receive a bulky file. When data size required for sending or
receiving is bulky, packet communications fees will be a
large sum. You are advised to use i-mode packet flat-rate
service.
Two types of i-motion files, streaming type and normal type
are available.
Categories Description
Streaming type
(cannot be saved)
Plays data while receiving.
Normal type (can be
saved)
When download is completed,
the Download Completion display
appears. You can then play or save
data.
Downloading i-motion
1
Select an i-motion file from a
downloadable site
▶
Save
▶
YES
▶
Select a destination folder.
Playing i-motion
1
m
▶
Data box
▶
imotion/Movie
▶
Select a folder
▶
Select a file.
59
More Convenient
i-concier
i-concier works to serve you with a pleasant life just like a clerk
or concierge does. The service holds your data (area information
about your neighborhood, Memo, Schedule, ToruCa, Phonebook,
etc.) and sends you information, with good timing, about a variety
of things according to the contents of your memo and your
schedule event, your living area, your current location, or your
preference or taste. This service provides related information
about Memos, schedule events, or ToDo items, and automatically
updates schedule events or ToruCa fi les to the latest, and also
automatically adds useful information such as about the opening
hours of various shops to your Phonebook. It also allows you
to share the schedules or images held by the DOCOMO’s Data
Storage Center with friends, family members or other groups. It
also enables you to easily print out the images held. i-concier
information is notifi ed by a Machi-chara image (cartoon character
that appears on the Stand-by display).
For details on i-concier, refer to DOCOMO website.
i-concier is a pay service which is available on a subscription
basis (You need to subscribe to i-mode to apply for i-concier).
If you have not subscribed to Data Security Service but will
newly subscribe to i-concier, you are to subscribe to Data
Security Service as well as i-concier.
Depending on the content (information, i-schedule, and others),
you might be charged separately an information fee other than
the i-concier monthly fee.
You are charged a packet communication fee separately for
receiving information except some.
You are charged separately a packet communication fee for
using detailed information.
You are charged separately a packet communication fee for
auto-updates of i-schedule, Memo, ToruCa, and Phonebook,
etc.
i-concier is available in Japanese only.
Receiving Information
1
When information arrives, blinks and
the content is displayed on the Stand-by
display
▶
Select a message
▶
Select a piece of information.
Displaying i-concier
1
m
▶
i-concier
▶
インフォメーション一覧
(Information list)
▶
Select a piece of
information.
Convenient Tools
Using Shabette-Kensaku
You can execute i-mode search by voice.
The fi rst time you use this function, select “Use” on the
usage information display.
You are charged separately a packet communication fee.
This function recognizes only Japanese word.
1
m
▶
Tool
▶
Shabette-Kensaku
▶
Within 10 seconds after the vibration
begins, speak into the microphone, and
then press Oo( ).
Even if you do not press Oo( ), your voice input is
accepted automatically within about 3 seconds after you
fi nish speaking.
60
More Convenient
Using Start by Voice
You can call up the function by voice.
This function is available in Japanese mode only.
The fi rst time you use this function, select “利用する (Use)”
on the usage information display, or press c().
1
d (for at least one second)
▶
When “それではどうぞ ★★音声受付中
★★ (Please ★★Voice is being
accepted.★★)” is displayed, pronounce
the function into the microphone within
10 seconds.
When the function to be called up cannot be specifi ed,
you can look it up in “使いかたガイド (Guide)”.
■Note when using Shabette-Kensaku or Start by Voice
Speak as clearly as possible, in natural conversation
speed.
Speak in quiet, noise-free locations.
Recognition result may differ depending on pronunciation
and the surrounding environment.
Using Schedule
1
m
▶
Tool
▶
Schedule
Select a date to show a schedule event of the selected
date. Select the schedule event to confi rm its details.
2
m( )
▶
New
▶
Enter each item
▶
c( )
Using Alarm
1
m
▶
Tool
▶
Alarm
▶
Highlight an alarm
and press c()
▶
Enter each item
▶
c( )
The alarm does not sound in Public mode (Drive mode),
Dial Lock, “Alarm” locked in Original Lock or Omakase
Lock.
61
More Convenient
Using Bar Code Reader
You can use the camera to scan QR codes and others, and
store them as fi les.
From the scanned data, you can make calls, compose
i-mode mail messages, access Internet websites, and so on.
■When scanning with Bar Code Reader
Scan the code as large as possible within
the guide frame.
Autofocus works when you scan the code
about 10 cm or more away from it.
When you scan the code in the
out-of-focus state, the recognition rate
lowers.
Hold the camera in parallel with the code
when you scan.
■ QR code
QR code is one of the two-dimensional codes
that denotes data in the vertical and horizontal
directions.
“株式会社NTTドコモ (NTT DOCOMO, INC.)”
is displayed when you scan the QR code with
the FOMA terminal.
Scan a Code
<Example> Access P-SQUARE by using
QR code on the right
1
m
▶
Tool
▶
Bar code reader
▶
Scan code
▶
Fit a code to the guide frame and
press Xo to focus
▶
Press Oo( ) to scan the code.
A URL is displayed as a scanned result.
2
Select the URL
▶
i-mode Browser
Guide frame
QR code for
accessing the site
62
More Convenient
Bluetooth Function
You can connect your FOMA terminal to a Bluetooth device,
and can talk on the phone or play music files.
Registering a Bluetooth Device to FOMA
Terminal
You can search and register a Bluetooth device to the FOMA
terminal. You need to place the Bluetooth device to be
registered standby for registration beforehand.
<Example> Register Wireless Earphone Set 02 and connect
using the Hands-free service
1
m
▶
Tool
▶
Bluetooth
▶
Register New Devices
2
Select “OK”.
3
Select Wireless Earphone Set 02
▶
Select “YES”.
When you register a Bluetooth device other than Wireless
Earphone Set 02, you need to enter “Bluetooth passkey”.
4
Select “Hands-free”.
Select “Headset” or “Hands-free” for talking, and select
“Audio streaming” for playing music.
Connecting with Bluetooth Devices
1
m
▶
Tool
▶
Bluetooth
▶
Device list
2
Select a Bluetooth device
▶
Select a service to be used.
63
More Convenient
Data Management
Using microSD Card
If you do not have a microSD card, you need to purchase it.
P-01F supports a commercial microSD card of up to
2 Gbyte and microSDHC card of up to 32 Gbyte (As of
September 2013).
For the latest operation, check information such as the
memory capacity and manufacturers of microSD cards,
access the following sites (in Japanese only). For the
microSD cards other than published in the sites, contact
each microSD card maker.
・From i-mode to P-SQUARE (As of September 2013)
iMenu→メニューリスト (Menu List)
→ケータイ電話メーカー (Mobile Phone Maker)
→P-SQUARE
・From personal computers(
http://panasonic.jp/mobile/)
Note that the published information is the result obtained
from the operation check, which does not necessarily
guarantee all performances of those microSD cards.
Make sure that you turn off the power, and then insert/
remove the microSD card.
Inserting/Removing microSD Card
The inserting slot of the microSD card is in the inside of the
back cover.
To insert it, remove the back cover, and then remove the
battery pack.
1
With the metal
terminal surface facing
downward, make sure
that the cut edge is
positioned at right and
then insert.
Push it until it clicks.
When you remove the microSD card
Push the microSD card until it stops and remove it.
Note that the microSD card may pop out when you insert
or remove it.
64
More Convenient
: A microSD card is inserted.
: Data is being read/written.
(Do not remove the microSD card nor turn off the
FOMA terminal.)
: The microSD card is write-protected.
: The microSD card cannot be used.
(Insert the microSD card again. If “ ” is still displayed,
execute “Check microSD” or “microSD format”.)
Icons on the Display
Checking microSD Card
Check and repair a microSD card.
Depending on the condition of the microSD card, correctly
repairing the card might not be possible, and data might be
deleted or the card might be initialized.
1
m
▶
Tool
▶
microSD
▶
Refer microSD data
▶
m( )
▶
Check microSD
▶
YES
Formatting microSD Card
When you use the microSD card for the fi rst time, you need
to format (initialize) it.
Be sure to use P-01F for formatting. The microSD card
formatted using other devices such as personal computers
may not work properly.
Note that formatting deletes all content on the microSD
card.
1
m
▶
Tool
▶
microSD
▶
Refer microSD data
▶
m( )
▶
microSD format
▶
Enter your Terminal
Security Code
▶
YES
Copying Data to microSD Card
<Example> Copying a still image
1
m
▶
Data box
▶
My picture
▶
Select a folder
▶
Highlight a still image
to be copied and press m()
▶
Copy to microSD
▶
Copy this
▶
Select a destination folder.
65
More Convenient
Copying Data to FOMA Terminal
<Example> Copying a still image
1
m
▶
Data box
▶
My picture
▶
l( )
▶
Select a folder
▶
Highlight a still image
to be copied and press m()
▶
Copy to phone
▶
Copy this
▶
Select a destination folder.
Displaying Data Stored on microSD Card
<Example> Displaying a still image
1
m
▶
Data box
▶
My picture
▶
l( )
▶
Select a folder
▶
Select an image.
The total memory and used memory (estimated) in the
microSD card can be displayed.
1.
m
▶
Tool
▶
microSD
▶
Refer microSD data
▶
m( )
▶
microSD info
Check Capacity of microSD Card
Backing up Data to microSD Card
You can back up Phonebook entries, schedule events, mail
messages, memos, bookmarks, and the settings on and
information about your FOMA terminal collectively onto the
microSD card. When restoring the backup data onto your
FOMA terminal, they are collectively restored.
Backing up data from the FOMA terminal onto the microSD
card is collectively applied to all data, so emptied fi les in the
FOMA terminal are also backed up on the microSD card.
When you restore such data onto your FOMA terminal,
emptied fi les on the microSD card overwrite the data in the
FOMA terminal created later.
1
m
▶
Tool
▶
microSD
▶
Backup/Restore
▶
Backup to microSD
▶
Enter your
Terminal Security Code
▶
YES
To restore backup data to FOMA terminal
1.
m
▶
Tool
▶
microSD
▶
Backup/Restore
▶
Restore to phone
▶
Enter your Terminal Security Code
▶
YES
66
More Convenient
Sending/Receiving Data by Infrared
Communication
You can send or receive data such as Phonebook entries to
or from a device supporting infrared communication function.
You cannot exchange data depending on the other party’s
device or FOMA terminal.
Within about
20 cm
Within ±15°
from the center
Infrared data port
Sending Data
Set the receiving end terminal first, and then start sending
data within 60 seconds.
1
Submenu of the data to be sent
▶
Send Ir data
▶
YES
Procedure for sending data might differ depending on the data.
Receiving Data
1
m
▶
Tool
▶
Receive Ir data
▶
Receive
▶
YES
Connecting to a PC
You can connect the FOMA terminal to a personal computer
to exchange WMA files, images or other files stored on
microSD card.
You can also access the Internet to perform data
communication.
※You need the FOMA USB Cable with Charge Function 02
(option) or FOMA USB Cable (option).
※To perform data communication, you need to install the
“FOMA communication configuration file” (driver).
For details, refer to “Manual for PC Connection”.
You can download the “FOMA communication configuration
file” and “Manual for PC Connection” from the DOCOMO
website. (
http://www.nttdocomo.co.jp/english/support/)
DOCOMO Connection Manager
“DOCOMO Connection Manager” is a software which comes
in handy for DOCOMO’s data communication.
It enables easy PC settings according with the terms and
conditions of the user’s agreement.
It also makes it possible to check the amount of the data
communication and provides a rough estimate of the
charges using the charge counter function.
For details, refer to the DOCOMO website.(
http://www.nttdocomo.co.jp/support/utilization/application/
service/connection_manager/)(In Japanese only)
67
Others
Support
Troubleshooting
First of all, check to see if you need
to update the software program
and then update it if necessary. See
page 70 for how to update software
programs.
When symptom persists even after
you check the countermeasures
for the problem you suffer, contact
the “Repairs” counter listed on the
back page of this manual or a repair
counter specified by DOCOMO.
The “Repairs” counter is available in
Japanese only.
Power source
The FOMA terminal does not turn on.
…Make sure the battery pack is attached to
the FOMA terminal correctly. (See page 20)
…Make sure the battery is fully charged. (See
page 21)
Charging
Cannot charge.
(The Call/Charging indicator does not
light, or it flickers.)
…Make sure the battery pack is attached to
the FOMA terminal correctly. (See page 20)
…
Make sure the power plug of the adapter
or cigarette lighter plug is securely inserted
into the outlet or cigarette lighter socket.
…
Make sure the adapter and the FOMA
terminal are connected correctly. (See page 21)
…
When you use an AC adapter (option),
make sure its connector is firmly connected
to the FOMA terminal or the provided
desktop holder. (See page 21)
…
When you use the desktop holder, make
sure the connector terminal of the FOMA
terminal is not stained. If it is stained, wipe
the terminal part with a dry cotton swab, etc.
…If you talk on the phone, have
communications, or operate other
functions for a long time during battery
charge, the temperature of the FOMA
terminal may rise to flicker the Call/
Charging indicator. In that case, charge
the battery after the FOMA terminal cools
down. (See page 21)
…
If you are in a location other than the
appropriate ambient temperature, charging
may not be started or fully charged. In that
case, charge the battery again under the
appropriate ambient temperature. (See page 21)
Operation of terminal
While you operate the FOMA terminal or
charge the battery, they get hot.
…While operating or charging, or when
you operate i-αppli programs, talk on the
videophone, or watch 1Seg programs
for a long time during battery charge, the
FOMA terminal, battery pack, or adapter
may become warm, but this does not
adversely affect operation, so you can
continue to use them.
The usable time of the battery is short.
…Make sure not to leave the FOMA terminal
out-of-service-area for a long time. If your
FOMA terminal is left out-of-service area,
it searches for radio waves to establish
communications, consuming more power.
…The usable time of the battery pack varies
depending on the usage environment or
its remaining life.
…Battery packs are consumables. The
usable time slightly shortens each time
you charge the battery. If the usable time
becomes extremely short as compared
with the default state even if fully charged,
purchase the specified battery pack.
The power of the FOMA terminal shuts
down and restarts.
…If the terminal of the battery pack is
stained, the connection might deteriorate
to shut down the power. Wipe the battery
terminal with a dry cotton swab, etc.
68
Others
Pressing keys is disabled.
…Make sure Dial Lock is deactivated. (See
page 36)
…Make sure Keypad Lock is deactivated.
(See page 37)
…Make sure Side Key Guard is set to “OFF”.
The docomo mini UIM card is not
recognized.
…Make sure you insert the docomo mini
UIM card in the correct direction. (See
page 20)
The clock does not show the correct time.
…
The clock may not show the correct
time when the power has been kept on
for a prolonged period of time. Check
whether “Auto time adjust” and “Auto time
difference” of “Set main time” have been
set to “Auto” and then, move to a location
with good signal reception, turn off the
power of FOMA terminal and then back
on.
Call
Cannot make a call by pressing numeric
keys.
…Make sure Restrict Dialing is deactivated.
…Make sure the lock for “Keypad dial” in
Original Lock is released. (See page 37)
…Make sure Dial Lock is deactivated. (See
page 36)
…Make sure Self Mode is deactivated.
Cannot talk.
(“ ” does not disappear even if you
move to another place.
You cannot make or receive a call, though
the radio wave conditions are not bad.)
…Turn off and on the FOMA terminal, or
remove and attach/insert the battery pack
or docomo mini UIM card. (See page 20,
page 22)
…Depending on the characteristics of the
radio waves, you may not be able to make
or receive a call even if the FOMA terminal
is “within service area” or “ ” is
displayed for a radio wave condition. Move
to another place and redial.
…Make sure the call restrictions such as
Call Rejection, Call Acceptation, etc. are
deactivated.
…Depending on the radio wave congestion
state, calls and mail messages may be
congested and hard to be connected
in crowded places. In that case, the
message “Please wait” or “Please wait
for a while” is displayed and a busy tone
sounds. Move to another place or wait for
a while, and then redial.
Camera
Still images and movies shot by the
camera are blurred.
…When you shoot a subject in a short
distance, set Focus mode to “Macro”.
…When you shoot portraits, set Focus mode
to “FaceDetect”.
…Set Stabilizer to “Auto” and then shoot.
…Make sure the lens of the camera is not
fogged or stained.
Warranty and After-sales Service
Warranty
Make sure that you have received a warranty
card provided at purchase. After checking
the contents of the warranty card as well as
“Shop name and date of purchase”, keep
the warranty card in a safe place. If you
notice that necessary items of the warranty
card are not fi lled in, immediately contact
the shop where you purchased the FOMA
terminal from. The term of the warranty is
one year from the date of purchase.
All or part of this product including
the accessories may be modifi ed for
improvement without notice.
After-sales Services
◎ When there is a problem with the FOMA
terminal
Before asking repairs, check
“Troubleshooting” in this manual or in “使
いかたガイド (Guide)” mounted on the
FOMA terminal. (“使いかたガイド (Guide)”
is available in Japanese mode only.) If the
problem remains unsolved, contact the
“Repairs” counter listed on the back page
of this manual for malfunction and consult
them.
The “Repairs” counter is available in
Japanese only.
69
Others
◎ When repairs are necessitated as a result
of consultation
Bring your FOMA terminal to a repair
counter specified by DOCOMO. Note that
your FOMA terminal is accepted for repair
during the repair counter’s business hours.
Further, note that you may need to wait for
fixing depending on the malfunction state.
■In warranty period
・ Your FOMA terminal is repaired charge
free in accordance with the terms of
warranty.
・ Make sure that you bring the warranty
card to the counter for repair. If you do
not show the warranty card, or when
troubles or malfunctions are regarded
to be caused by your mishandling (the
damages of liquid crystal, connector,
etc.), the repair cost is charged even
within the warranty period.
・ The cost for troubles caused by the use
of devices and consumables other than
those specified by DOCOMO is charged
even within the warranty period.
■Repairs may not be carried out in the
following cases:
・ When exposure to water is found at
our repair counter (Example: When the
moisture detection sticker has reacted)
・ When, as a result of inspection at our
repair center, corrosion is found due to
exposure to water, dew condensation, or
sweat, or when damage or deformation is
found in the circuit board [Repairs might
not be carried out when damage to the
connector terminal (earphone/microphone
terminal) or liquid crystal, or cracks in the
body are found.]
※Even if repair is feasible, the repair cost
is charged when the trouble you suffer
matches one of the symptoms listed
above, which is not supported by the
warranty.
■After the warranty period
We will repair your FOMA terminal on
request (charges will apply).
■Spare parts availability period
The minimum storage period of the
performance spare parts (parts required
for maintaining performance) for the FOMA
terminal is basically six years after the
closure of its production. Note, however,
that your FOMA terminal might not be
repaired depending on the troubled portions
because of the shortage of spare parts.
◎Other points to note
Make sure not to modify the FOMA
terminal or its accessories.
・ We might reject to repair depending on
the degrees of your modification.
The following might be regarded as
modifications:
・ To put stickers, etc. onto the liquid
crystal or keys
・ To decorate the FOMA terminal using
adhesives
・ To replace the coverings etc. with
those of other than DOCOMO genuine
products
・ Repairs of troubles or malfunctions
resulting from the modifications are
charged even within the warranty period.
Do not peel the nameplate off the FOMA
terminal.
Note that when we cannot ensure the
contents described on the nameplate
and therefore cannot verify the product
conformity to the technical standard, it
might happen that we at DOCOMO reject
to repair the malfunction.
The information such as about function
settings, etc. might be reset depending
on the troubles or repairs, or the way
you handle the FOMA terminal. Set the
settings again.
If the FOMA terminal is repaired,
the Bluetooth Address may change,
regardless of the area that was originally
damaged.
The parts generating magnetism are
used in the following portions of the
FOMA terminal. Note that if you place
a magnetism-sensitive object such as a
cash card near the FOMA terminal, the
card might become unusable.
Portions: speaker, earpiece
This FOMA terminal comes with the
waterproof performance, however, if the
inside of the FOMA terminal gets wet or
becomes moist, immediately turn off the
power and remove the battery pack; then
visit a repair counter. The FOMA terminal
may not be repaired depending on the
condition.
70
Others
Error Information Send Setting
When an error occurs on the FOMA terminal, the error
information is created automatically and send it to DOCOMO
if this function is set to “ON”.
1
m
▶
Setting
▶
Other setting
▶
Error info send set.
▶
Enter your
Terminal Security Code
▶
ON/OFF
i-mode Fault Diagnosis Site
You can check on your FOMA terminal whether sending/
receiving mail messages, downloading images/melodies,
and others are normally working. When you think your FOMA
terminal is in trouble as a result of your check, contact the
“Repairs” counter listed on the back page of this manual.
The “Repairs” counter is available in Japanese only.
To connect to “ｉモード故障診断サイト (i-mode Fault
Diagnosis Site)” [in Japanese only]
i-mode site: iMenu→お客様サポート (User support)
→お問い合わせ (Inquiries)
→故障・電波状況お問い合わせ先 (Failures &
Radio wave condition)
→ｉモード故障診断 (i-mode Fault Diagnosis)
QR code for accessing the site
When you use overseas, you are charged a fee.
Updating Software
This function is to check whether you need to update
software programs in the FOMA terminal by connecting to
the network, and if necessary, you can download some parts
of software programs using packet communication, and can
update the software programs.
If you need to update the software programs, the DOCOMO
website and “お客様サポート (User support)” in Japanese
iMenu lets you know information about updating software
programs. There are three kinds for updating software
programs; “Auto-update”, “Update Now” and “Reserve
Update”.
You can update software programs, with data retained,
such as Phonebook entries, images shot by the camera,
or downloaded data in the FOMA terminal; however
note that data may not be protected depending on the
conditions (such as malfunction, damage, or drench) your
FOMA terminal is placed in. You are advised to back up
important data. Note that data such as downloaded ones
might not be backed up.
■Before using Software Update
Do not remove the battery pack while updating software
programs. You may fail to update.
Fully charge the battery before updating software
programs.
It may take time to update (download or rewrite) software
programs.
You cannot make/receive calls, use communication
functions, and other functions while updating software
programs. (You can receive voice calls during download.)
71
Others
You are advised to update software programs when radio
wave is strong enough with the three antennas displayed
and while you are not moving. If radio wave conditions get
worse while downloading software programs, or download
is suspended, move to a place with better radio wave
conditions and try again to update software programs.
When updating software programs, the proprietary
information about your FOMA terminal (model name or
serial number, etc.) is automatically sent to the server
(DOCOMO-managed server for Software Update). We at
DOCOMO never use the sent information for purposes
other than to update software programs.
If you fail to update software programs, “Rewrite failed”
is displayed and you cannot do all operations. In that
case, you are kindly requested to come to a repair counter
specified by DOCOMO.
Start Software Update from Icon
1
Select “Update notification icon” on the
Stand-by display.
Update notification icon
Check whether you need to update software programs.
2
When update is necessary, “Update is
needed” is displayed. And you can select
either “Now update” or “Reserve”.
When you
select “Now
update”, update
immediately
starts.
When rewriting is
completed, your
FOMA terminal
automatically
restarts and the Update Completion Confirmation
display appears.
When you select “Reserve”, you can select the date and
time you want.
Start Software Update from Menu
1
m
▶
Setting
▶
Other setting
▶
Software Update
▶
Enter your Terminal
Security Code
▶
Update
2
Go to step 2 of “Start Software Update
from Icon” on page 71.
72
Others
Scanning Function
You can detect data or application programs, which might
cause troubles, from among those downloaded to your
FOMA terminal, and then can delete the data or stop starting
the application programs.
This scan function provides a certain protective measure
to fi lter out data that might cause troubles with your FOMA
terminal at the time when you browse websites or receive
messages. Note that when the virus pattern data supporting
respective troubles is not yet downloaded to your FOMA
terminal, or when no virus pattern data supporting them
is found, this function does not prevent troubles from
occurring.
Updating pattern data
First of all, update the pattern data to obtain the latest.
1. m
▶
Setting
▶
Lock/Security
▶
Scanning function
▶
Update
▶
YES
▶
YES
Displays for scanning results
■About the display for scanned problem elements
A warning display appears when problematic
data is found. Press i() from the
warning display to show the name of the
problem element.
When six or more problem elements are
found, the sixth and later problem element
names are omitted.
“” might not appear depending on
the detected problem element.
■The displays for scanning result
Alert level 0 Press Oo( ) to continue
the operation.
Alert level 1
Press Oo( ) to stop
and end the operation.
Press c( ) to continue
the operation.
Alert level 2
Press Oo( ) to stop
and end the operation.
Alert level 3
Press c( ) to delete
the data and end the
operation.
Press Oo( ) to stop
and end the operation.
Alert level 4
Press Oo( ) to delete
the data and end the
operation.
The alert displays differ from shown above may appear.
73
Others
Options and Related Devices
Combining various options with the FOMA terminal, you can realize more versatile use from personal purpose to business
purposes. Some products may not be dealt in depending on the area. For details, consult a handling counter such as a
docomo Shop. For details on options, refer to the user’s manuals of respective options and related devices.
・Battery Pack P23
・Back Cover P61
・Desktop Holder P54
・FOMA AC Adapter 01/02※1
・FOMA AC Adapter 01 for Global use※1
・FOMA DC Adapter 01/02
・FOMA Portable Charging Adapter 01/02/03
・FOMA Dry Battery Adapter 01
・FOMA eco Solar Panel 01
・FOMA USB Cable with Charge Function 02※2
・FOMA USB Cable※2
・FOMA Indoor Booster Antenna※3
・FOMA Indoor Booster Antenna (Stand Type)※3
・Carry Case L 01
・Carry Case 02
・In-Car Holder 01※4
・Earphone/Microphone 01
・Stereo Earphone Set 01
・Earphone/Microphone with Switch P001/P002※5
・Flat-plug Earphone/Microphone with Switch P01/P02※6
・Flat-plug Stereo Earphone Set P01※6
・Earphone Plug Adapter P001※6
・Earphone Plug Adapter for External connector terminal 01
・Earphone Plug Adapter 01
・Flat-plug Connector/Stereo Mini-jack Conversion Adapter P01※6
・Bluetooth Headset F01※7
・AC Adapter for Bluetooth Headset F01
・Wireless Earphone Set P01
・Wireless Earphone Set 02/03
・Bone conduction microphone/receiver 01※6/02
・In-Car Hands-Free Kit 01※8
・FOMA In-Car Hands-Free Cable 01
※1 See page 21 for charging batteries using AC adapter.
※2 If you use a USB hub, outer devices may not work correctly.
※3 Use it in Japan only.
※4 If the connector terminal, etc. of the FOMA terminal comes into contact with the In-Car Holder, change the direction of the FOMA terminal
or In-Car Holder. Then, install.
※5 Earphone Plug Adapter P001 and Earphone Plug Adapter for External connector terminal 01 are required.
※6 Earphone Plug Adapter for External connector terminal 01 is required.
※7 AC Adapter for Bluetooth Headset F01 is required.
※8 To charge the P-01F, FOMA In-Car Hands-Free Cable 01 is required.
74
Others
Appendix
Function List
Execute “Resetting the Function
Settings to Default” on page 37 for the
items indicated by to return to
the respective defaults.
Mail
Inbox
Outbox
Draft
Mail history box
Compose new message
Create new Deco-Anime
Decome-
Template
Deco-mail
Decome-Anime
Compose new SMS
Check mail/message
Check new SMS
Receive option
Mail setting
Receive setting
Display setting
Text predict
Signature setting
Phrases/Store word
Mail box lock
Set check mail/message
Blog/Mail group
Mail
Mail setting
Address/Spam Mail Set.
Auto save setting
SMS setting
Area Mail setting
Auto Deco-mail setting
Check settings
Reset
imode/web
iMenu/Search
Bookmark
Screen Memo
Browsing history
Enter URL Enter URL
URL enter history
i-Channel
i-Channel list
Ticker display setting
Reset i-Channel
imode/
web setting
imode Browser Set.
Full Browser Settings
Common Settings
Confirm imode setting
Reset imode setting
Full Browser Home
iαppli
Software list (phone)
iαppli
(microSD)
Software list
iαppli data
iαppli call logs
iαppli
iαppli run
info
End stand-by info
End Widget appli info
Security error history
Auto start info
Trace info
iαppli
setting
Auto-start setting
Disp. software info
i-Widget overseas use
i-Widget sound effect
i-αppli call settings
iαppli volume
Preferred tone
αBacklight
αPower saver
αVibrator
Check settings
CAMERA/TV/MUSIC
Camera
Digicam mode
Photo mode
Movie mode
Picture album
1Seg
Activate 1Seg
Program guide
TV timer list
Timer recording list
Recording result
75
Others
CAMERA/TV/MUSIC
1Seg
TVlink
Channel list
Channel setting
User setting
MUSIC Player
Data box
My picture
MUSIC
imotion/Movie
Melody
Content package
My document
Kisekae Tool
Machi-chara
Chara-den
1Seg
Image
Video
Position memory
Document viewer
Font
SD other files
Search all history
Tool
Bar code
reader
Scan code
Saved data
Calculator
Alarm
Tool
Receive Ir
data
Receive
Receive all
Schedule
Memo
Data
Security
Service
Data check/Download
Update phonebooks
Update schedule etc.
Update images
Update setting info
Setting/History
microSD Refer microSD data
Backup/Restore
Guide
Voice recorder
Bluetooth
Device list
Register New Devices
Bluetooth ON/Bluetooth
OFF
Accept registered
Accept dialup devices
Bluetooth settings
Voice announce
Dictionary Enter word
Reference history
Phrases/
Store word
Common phrases
Store word
Download dictionary
Voice quick start
Tool
Shabette-Kensaku
ToruCa
ToruCa
settings
ToruCa settings
Receive ToruCa
Contact DOCOMO
TEL function
Phonebook
Search phonebook
Add to phonebook
UIM operation
Phonebook set./Check
Forwarding image
Rec. msg./
Voice memo
Play/Delete msg.
Play/Delete VP msg.
Record voice memo
Record message setting
Dialed/
Received
call
Dialed calls
Received calls
Redial
Dial/
Receive
setting
Nuis. call blocking
Caller ID request
Caller ID notification
Arrival call act
Dial call setting
Receive call setting
In-call setting
Headset function set.
Call rejection set.
Missed call notice
76
Others
TEL function
Videophone
setting
Visual preference
Select image
Auto redial as voice
Ntfy switch-mode
Reject videophone
Hands-free switch
V.phone while packet
Call
duration/
charge
Call duration/charge
Notify cost limit
Reset total
Auto reset
Disaster Voice Messaging
Koe-no-
Takuhaibin
Msg. confirm/set(site)
Message confirm(voice)
Settings(voice)
2in1
Melody call
Voice mail
service
Play messages
Activate
Deactivate
Set ring time
Check setting
Voice mail setting
Check messages
Message notification
Delete icon
Setting for videophone
TEL function
Other
network
serv.
Call forwarding
Call waiting
English guidance
Remote access
Multi Number
Additional service
Choku-Den
Setting
Screen/
Display
Kisekae Tool setting
Stand-by display
MyFACE setting
Color theme setting
Each display setting
Sub-display setting
Machi-chara setting
Soft key
Menu Theme
Viewer settings
Icons
Icons setting
View blind
Image display mode
LCD AI
Mail ticker display
Information display
Setting
Sound/Vib./
Manner
Ring volume
Select ring tone
Other sound setting
Vibrator setting
Manner mode setting
Machi-chara chat set.
Backlight/
Illum.
Backlight
Illumination setting
Text
display/
input
Font
Character input set
バイリンガル
Time
Set main time
Sub clock setting
Clock display
Auto power ON
Auto power OFF
Lock/
Security
Lock
Keypad lock
Secret mode
Secret data only mode
Call rejection set.
Change security code
UIM setting
Scanning function
Timer lock ON at close
Incm. PH-book avail.
77
Others
Setting
Battery
eco mode
eco mode setting
eco mode autostart
Use history
Battery level
External
connection
USB mode
Bluetooth
Headset microphone
Femtocell
Other
setting
MultiOneTouch set.
Side key guard
Camera-button setting
Alarm setting
Self mode
Reset settings
Initialize
Software Update
Error info send set.
Quick search URL
Map/Overseas
imadoco
search
imadoco kantan search
imadoco search
i-area
Overseas
NW search
Network search setting
PLMN setting
Display operator name
Display area status
Re-search icon set.
Map/Overseas
Overseas
setting
Inquiries(overseas)
Sub clock setting
Bar incoming when roam
Missed call notice
Roaming guidance
Int’l dial assistance
imode service set.
Mail/Message usage set
Network service
i-concier
Profile
MultiOneTouch
Others
Character input
78
Others
Main Specifications
■Handset
Model P-01F
Dimensions (when closed) Height: Approx. 112 mm
Width: Approx. 51 mm
Depth: Approx. 15.1 mm
Weight (with the battery
pack attached)
Approx. 119 g
Continuous standby time
(FOMA/3G)
Standstill: Approx. 610 hours
Continuous talk time
(FOMA/3G)
Voice call : Approx. 200 minutes
Videophone call : Approx. 130 minutes
1Seg watching time Approx. 350 minutes
Charging time AC adapter: Approx. 120 minutes
DC adapter: Approx. 120 minutes
Display Type Display: TFT 262,144 colors
Sub-display: Organic EL 1 color
Size Display: Approx. 3.4 inches
Sub-display: Approx. 0.9 inches
Number of pixels Display: 409,920 pixels (480 dots x 854
dots)
Sub-display: 4,608 pixels (128 dots x
36 dots)
Image
pickup
device
Type CMOS
Size 1/4.0 inches
Camera Number of
effective pixels
Approx. 5,100,000 pixels
Number of
recording pixels
(maximum)
Approx. 5,000,000 pixels
Recording
Number of
recordable still
images※1
Approx. 4,800 max. (default)
Number of
still images
for continuous
shooting
For Digicam Mode in Continuous setting
VGA: 8 Square(S): 8
WQVGA: 8
For Photo Mode in
Continuous setting
(
Continuous Mode)
VGA: 4 QVGA: 5, 10
QCIF: 5, 10, 15, 20
Sub-QCIF: 5, 10, 15, 20
Music
playback
Continuous
playback time※2
SD-Audio file (supports Play Background):
Approx. 6,500 minutes
※3
Chaku-uta Full® music file (supports Play
Background): Approx. 6,000 minutes※3
i-motion file (including Chaku-uta®
music file): Approx. 1,260 minutes※3
WMA file (supports Play Background):
Approx. 4,600 minutes
Memory
capacity
Chaku-uta®Approx. 621 Mbyte (default)※4
Chaku-uta Full®
“Chaku-uta” is a registered trademark of Sony Music Entertainment Inc.
※1 Picture size: VGA (480 x 640), Quality: Standard
※2 The continuous playback time is the estimated duration that you
can play back using the Stereo Earphone Set 01 (option) with the
FOMA terminal closed.
※3 File format: AAC
※4 Shares with still images, i-motion files, melodies, PDF files,
Kisekae Tool files, Machi-chara images, Content packages, Font,
Screen memos, ToruCa files, and i-αppli programs.
79
Others
■Battery pack
Name of product Battery Pack P23
Battery type Li-ion (lithium ion) battery
Voltage 3.7 V
Capacity 800 mAh
■Specifications of shooting
<Still image (Photo mode)>
File format (Extension) JPEG (jpg)
The number of files that can be
saved to P-01F
Approx. 4,800 max. ※1※2
The number of files that can be
saved to the microSD card (1 Gbyte)
Approx. 10,244 max. ※2
<Moving picture (Movie mode)>
File format (Extension) MP4, ASF (3gp, asf)
Recordable time to P-01F
Approx. 30 seconds max.
※1※3
Recordable time to the microSD
card (1 Gbyte)
Approx. 180 minutes max. ※4
<Zoom>
Still image
(Photo mode)
Level of zoom 21 levels
The maximum
magnifications
Approx. 10.1 times
Moving picture
(Movie mode)
Level of zoom 21 levels
The maximum
magnifications
Approx. 10.1 times
※1 Default setting
※2 The number of files that can be saved under the conditions of
“Picture size: VGA (480 x 640), Quality: Standard.
※3 Maximum recording duration per shot that can be saved to the
main unit under the conditions of “Movie size: VGA (640 x 480),
File size: Mail restriction (L), Quality: Standard, Movie type set:
Normal”.
※4 Maximum recording duration per shot that can be saved to the
microSD card (1 Gbyte) under the conditions of “Movie size: VGA
(640 x 480), File size: Long time, Quality: Standard, Movie type
set: Normal”.
■Recordable time of 1Seg
Maximum (total) recordable time to
the microSD card (1 Gbyte)
Approx. 320 minutes
Maximum (total) recordable time to
the microSDHC card (32 Gbyte)
Approx. 10,240 minutes
The maximum recordable time is the estimate for 224 kbps of video,
48 kbps of audio, and 52 kbps of data (including captions). The
recordable time varies depending on the broadcasting station or
program.
The maximum file size for continuous recording is up to 2 Gbyte
under SD-VIDEO specifications.
■Number of savable/registerable items in FOMA terminal
Function Number of savable/
registerable items
Phonebook 3,000
Schedule 2,500 max. ※1
Mail Received mail 2,500 max. ※1※2
Sent mail 1,000 max. ※1
Still image 7,000 max. ※1
i-motion file 7,000 max. ※1
Kisekae Tool 7,000 max. ※1
i-αppli 100 max. ※1
※1 The number of savable/registerable items may decrease
depending on the data volume.
※2 Includes pre-installed data.
80
Others
Specific Absorption Rate
(SAR) of Mobile Phones
SAR Certification
Information
This model P-01F mobile phone complies
with Japanese technical regulations and
international guidelines regarding exposure to
radio waves.
This mobile phone was designed in
observance of Japanese technical regulations
regarding exposure to radio waves* and limits
to exposure to radio waves recommended by
a set of equivalent international guidelines.
This set of international guidelines was set
out by the International Commission on
Non-Ionizing Radiation Protection (ICNIRP),
which is in collaboration with the World Health
Organization (WHO), and the permissible limits
include a substantial safety margin designed
to assure the safety of all persons, regardless
of age and health condition.
The technical regulations and international
guidelines set out limits for radio waves as the
Specific Absorption Rate, or SAR, which is the
value of absorbed energy in any 10 grams of
tissue over a 6-minute period. The SAR limit
for mobile phones is 2.0 W/kg. The highest
SAR value for this mobile phone when tested
for use at the ear is 0.739 W/kg. There may be
slight differences between the SAR levels for
each product, but they all satisfy the limit.
The actual SAR of this mobile phone while
operating can be well below that indicated
above. This is due to automatic changes to the
power level of the device to ensure it only uses
the minimum required to reach the network.
Therefore in general, the closer you are to a
base station, the lower the power output of
the device.
This mobile phone can be used in positions
other than against your ear. This mobile phone
satisfies the international guidelines when
used with a carrying case or a wearable
accessory approved by NTT DOCOMO,
INC.** In case you are not using the approved
accessory, please use a product that does not
contain any metals, and one that positions the
mobile phone at least 1.5 cm away from your
body.
The World Health Organization has stated
that “a large number of studies have been
performed over the last two decades to assess
whether mobile phones pose a potential
health risk. To date, no adverse health effects
have been established as being caused by
mobile phone use.”
Please refer to the WHO website if you would
like more detailed information. (
http://www.who.int/docstore/peh-emf/
publications/facts_press/fact_english.htm)
Please refer to the websites listed below if you
would like more detailed information regarding
SAR.
Ministry of Internal Affairs and
Communications Website: (
http://www.tele.soumu.go.jp/e/sys/ele/index.
htm)
Association of Radio Industries and
Businesses Website: (
http://www.arib-emf.org/index02.html)
(In Japanese only)
NTT DOCOMO, INC. Website: (
http://www.nttdocomo.co.jp/english/
product/sar/)
Panasonic Mobile Communications Co., Ltd.
Website: (
http://panasonic.jp/mobile/support/)
(In Japanese only)
* Technical regulations are defined by the
Ministerial Ordinance Related to Radio
Law (Article 14-2 of Radio Equipment
Regulations).
** Regarding the method of measuring SAR
when using mobile phones in positions
other than against the ear, international
standards (IEC62209-2) were set in March
of 2010. On the other hand, technical
regulation is currently being deliberated on
by national council. (As of October, 2011)
81
Others
European RF Exposure
Information
This mobile phone complies with the EU
requirements for exposure to radio waves.
Your mobile phone is a radio transceiver,
designed and manufactured not to
exceed the SAR* limits** for exposure
to radio-frequency (RF) energy, which
SAR* value, when tested for compliance
against the standard is 0.729 W/kg for head
configuration.
While there may be differences between
the SAR* levels of various phones and at
various positions, they all meet*** the EU
requirements for RF exposure.
* The exposure standard for mobile phones
employs a unit of measurement known as
the Specific Absorption Rate, or SAR.
** The SAR limit for mobile phones used
by the public is 2.0 watts/kilogram (W/
kg) averaged over ten grams of tissue,
recommended by The Council of the
European Union. The limit incorporates
a substantial margin of safety to give
additional protection for the public
and to account for any variations in
measurements.
*** Tests for SAR have been conducted using
standard operating positions with the
phone transmitting at its highest certified
power level in all tested frequency bands.
Although the SAR is determined at the
highest certified power level, the actual
SAR level of the phone while operating
can be well below the maximum value.
This is because the phone is designed to
operate at multiple power levels so as to
use only the power required to reach the
network. In general, the closer you are
to a base station antenna, the lower the
power output.
Declaration of Conformity
The product “P-01F” is declared to
conform with the essential requirements
of European Union Directive 1999/5/EC
Radio and Telecommunications Terminal
Equipment Directive 3.1(a), 3.1(b) and
3.2. The Declaration of Conformity can
be found on (http://panasonic.net/pmc/
support/index.html).
※The European RTTE approval of this
product is limited to the use of the P-01F
handset, Battery Pack and FOMA AC
Adapter 01 for Global use (100 to 240 V AC)
only. Other accessories are not part of the
approval.
FCC Notice
This device complies with part 15 of the
FCC Rules.
Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and
(2) This device must accept any interference
received, including interference that may
cause undesired operation.
Changes or modifications not expressly
approved by the manufacturer responsible
for compliance could void the user’s
authority to operate the equipment.
FCC RF Exposure
Information
This model phone meets the U.S.
government’s requirements for exposure
to radio waves.
Your wireless phone contains a radio
transmitter and receiver. Your phone is designed
and manufactured not to exceed the emission
limits for exposure to radio frequency (RF)
energy set by the Federal Communications
Commission of the U.S. Government. These
limits are part of comprehensive guidelines and
establish permitted levels of RF energy for the
general population. The guidelines are based on
standards that were developed by independent
scientific organizations through periodic and
thorough evaluation of scientific studies.
The exposure standard for wireless mobile
phones employs a unit of measurement
known as the Specific Absorption Rate (SAR).
82
Others
The SAR limit set by the FCC is 1.6 W/kg.*
Tests for SAR are conducted using standard
operating positions accepted by the FCC
with the phone transmitting at its highest
certified power level in all tested frequency
bands. Although the SAR is determined at the
highest certified power level, the actual SAR
level of the phone while operating can be well
below the maximum value. This is because
the phone is designed to operate at multiple
power levels so as to use only the power
required to reach the network. In general,
the closer you are to a wireless base station
antenna, the lower the output.
Before a phone model is available for sale
to the public, it must be tested and certified
to the FCC that it does not exceed the limit
established by the U.S. government-adopted
requirement for safe exposure. The tests are
performed in various positions and locations
(for example, at the ear and worn on the
body) as required by FCC for each model. The
highest SAR value for this model phone as
reported to the FCC when tested for use at
the ear is 0.700 W/kg, and when worn on the
body in a holster or carry case, is 0.915 W/
kg. (Body-worn measurements differ among
phone models, depending upon available
accessories and FCC requirements). While
there may be differences between the SAR
levels of various phones and at various
positions, they all meet the U.S. government
requirement.
The FCC has granted an Equipment
Authorization for this model phone with
all reported SAR levels evaluated as in
compliance with the FCC RF exposure
guidelines. SAR information on this model
phone is on file with the FCC and can be
found under the Display Grant section at
(http://www.fcc.gov/oet/ea/fccid/) after search
on FCC ID UCE113059A.
For body worn operation, this phone has
been tested and meets the FCC RF exposure
guidelines. Please use an accessory
designated for this product or an accessory
which contains no metal and which positions
the handset a minimum of 1.5 cm from the
body.
* In the United States, the SAR limit for
wireless mobile phones used by the
public is 1.6 watts/kg (W/kg) averaged
over one gram of tissue. SAR values may
vary depending upon national reporting
requirements and the network band.
Important Safety Information
Aircraft
Switch off your wireless device when boarding
an aircraft or whenever you are instructed to
do so by airline staff. If your device offers a
‘flight mode’ or similar feature consult airline
staff as to whether it can be used on board.
Driving
Full attention should be given to driving
at all times and local laws and regulations
restricting the use of wireless devices while
driving must be observed.
Hospitals
Mobile phones should be switched off
wherever you are requested to do so in
hospitals, clinics or health care facilities.
These requests are designed to prevent
possible interference with sensitive medical
equipment.
Petrol Stations
Obey all posted signs with respect to the use
of wireless devices or other radio equipment
in locations with flammable material and
chemicals. Switch off your wireless device
whenever you are instructed to do so by
authorized staff.
Interference
Care must be taken when using the phone in
close proximity to personal medical devices,
such as pacemakers and hearing aids.
Pacemakers
Pacemaker manufacturers recommend that a
minimum separation of 15 cm be maintained
between a mobile phone and a pacemaker
to avoid potential interference with the
pacemaker. To achieve this use the phone on
the opposite ear to your pacemaker and do
not carry it in a breast pocket.
Hearing Aids
Some digital wireless phones may interfere
with some hearing aids. In the event of
such interference, you may want to consult
your hearing aid manufacturer to discuss
alternatives.
Other Medical Devices
Please consult your physician and the device
manufacturer to determine if operation of your
phone may interfere with the operation of your
medical device.
83
Others
Export Administration
Regulations
This product and its accessories might be
covered by the Japan Export Administration
Regulations (“Foreign Exchange and Foreign
Trade Law” and its related laws). To export this
product and its accessories, take the required
measures on your responsibility and at your
expenses. For details on the procedures,
contact the Ministry of Economy, Trade and
Industry.
Intellectual Property
Right
Copyrights and Portrait
Rights
You have no right to copy, modify, or distribute
the contents such as text, images, music, or
software programs downloaded from websites
on the Internet, or images shot by the cameras
of this product without permission from the
copyright holder except for when the copy or
quote is for personal use that is allowed by the
copyright law.
Note that it may be prohibited to shoot or
record live performances or exhibitions even
for personal use. Make sure that you refrain
from shooting portraits of other persons and
distributing such portraits over the Internet
without consent, as this violates portrait
rights.
Trademarks
“FOMA”, “i-mode”, “i-αppli”, “i-motion”,
“Deco-mail”, “WORLD CALL”, “i-area”,
“WORLD WING”, and the logos of “i-mode”,
“i-αppli”, “Deco-mail” are trademarks or
registered trademarks of NTT DOCOMO,
INC.
“Catch Phone (Call waiting service)” is a
registered trademark of Nippon Telegraph
and Telephone Corporation.
McAfee® is registered trademarks or
trademarks of McAfee, Inc. and/or its
affiliates in the US and/or other countries.
Rovi, G-GUIDE, G-GUIDE
MOBILE and G-Guide related
logos are trademarks or
registered trademarks of Rovi Corporation
and/or its subsidiaries in Japan.
QuickTime is a registered trademark of
Apple Inc., in the US and other countries.
Microsoft®, Windows®, Windows Media®
and Windows Vista® are trademarks
or registered trademarks of Microsoft
Corporation in the United States and/or
other countries.
Powered by JBlend™ Copyright
2002-2013 Aplix Corporation. All
rights reserved.
JBlend and JBlend-related
trademarks are trademarks or registered
trademarks of Aplix Corporation in Japan
and other countries.
microSDHC Logo is a trademark of
SD-3C, LLC.
“Multitask” is a registered trademark of NEC
Corporation.
“AXIS Font” is a trademark of AXIS Inc., and
the “AXIS” font is a font developed by Type
Project Inc.
This product contains
NetFront Browser,
NetFront Document
Viewer and NetFront Sync
Client of ACCESS CO., LTD.
ACCESS, the ACCESS logo, and NetFront
are registered trademarks or trademarks
of ACCESS CO., LTD. in the United States,
Japan and/or other countries.
Copyright © 2013 ACCESS CO., LTD. All
rights reserved.
This software is based in part on the work
of the Independent JPEG Group.
QR code is a registered trademark of Denso
Wave Inc.
“One-push Open™” is a trademark of
Panasonic Corporation.
Google is trademark of Google Inc.
84
Others
Powered by Mascot Capsule®/Micro3D
Edition™
Mascot Capsule® is a trademark of HI
CORPORATION.
“Blu-ray Disc” and “Blu-ray” are trademarks
of the Blu-ray Disc Association.
Other company names and product names
described in the text are trademarks or
registered trademarks of those companies.
Others
This product contains IrFront of ACCESS
CO., LTD. IrFront is a registered trademark
or trademark of ACCESS CO., LTD. in the
United States, Japan and/or other countries.
The IrDA® Feature Trademark is owned by
the Infrared Data Association and used
under license therefrom.
Contains Adobe® Flash® Lite® and Adobe
Reader® Mobile technology by Adobe
Systems Incorporated.
Adobe Flash Lite Copyright © 2003-2013
Adobe Systems Incorporated. All rights
reserved.
Adobe Reader Mobile Copyright ©
1993-2013 Adobe Systems Incorporated. All
rights reserved.
Adobe, Adobe Reader, Flash, and Flash
Lite are either registered trademarks or
trademarks of Adobe Systems Incorporated
in the United States and/or other countries.
This product contains software licensed
complying with GNU General Public License,
Version 2 (GPL v2), GNU Lesser General
Public License (LGPL), etc. The program
is free software; you can copy it and/or
redistribute it and/or modify it under the
terms of the GPL v2 or LGPL as published
by the Free Software Foundation. At least
three(3) years from delivery of products,
Panasonic Mobile Communications Co., Ltd
will give to any third party who contact us at
the contact information provided below, for
a charge no more than our cost of physically
performing source code distribution, a
complete machine-readable copy of the
corresponding source code covered under
GPL v2/LGPL. Contact Information
(
pmc-cs@gg.jp.panasonic.com
)
Source code is also freely available to you
and any other member of the public via the
website below.
(
http://panasonic.jp/mobile/gpl/english.html
)
Please note that we cannot respond to any
inquiries regarding the source code. You
cannot download the source code from a
mobile phone. Use your PC to download the
source code.
For more details on the relevant software
(including license information of GPL v2/
LGPL),
follow these steps: in Main Menu, →Data
box →My document →imode →GPL/
LGPLライセンス説明.
(The first part of “GPL/LGPLライセンス説明”
is only available in Japanese.)
iWnn of OMRON SOFTWARE Co., Ltd. is
used for conversion methods for Japanese
language.
iWnn © OMRON SOFTWARE Co., Ltd.
2008-2012 All Rights Reserved.
“Text Profiler” is trademark of OMRON
Corporation.
The Bluetooth® word
mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by
Panasonic Mobile Communications Co.,
Ltd. is under license. Other trademarks and
trade names are those of their respective
owners.
This product is licensed under the MPEG-4
patent portfolio license and AVC patent
portfolio license for the personal use of a
consumer or other uses in which it does not
receive remuneration to
(i) encode video in compliance with the
MPEG-4 Visual Standard, AVC Standard
(“MPEG-4/AVC Video”) and/or
(ii) decode MPEG-4/AVC Video that was
encoded by a consumer engaged in a
personal activity and/or was obtained
from a video provider licensed to provide
MPEG-4/AVC Video.
No license is granted or shall be implied for
any other use.
Additional information may be obtained
from MPEG LA, L.L.C.
See (http://www.mpegla.com).
This product is manufactured or sold
under license from InterDigital Technology
Corporation.
85
Others
The abbreviations of operating systems
(Japanese versions) below are used in this
manual.
Windows 8 stands for Microsoft® Windows®
8, Microsoft® Windows® 8 Pro, Microsoft®
Windows® 8 Enterprise.
Windows 7 stands for Microsoft® Windows®
7 (Starter, Home Basic, Home Premium,
Professional, Enterprise and Ultimate).
Windows Vista stands for Windows Vista®
(Home Basic, Home Premium, Business,
Enterprise and Ultimate).
Windows XP indicates the Microsoft®
Windows® XP Professional operating
system or Microsoft® Windows® XP Home
Edition operating system.
This product is protected by certain
intellectual property rights of Microsoft
Corporation and third parties. Use or
distribution of such technology outside of
this products is prohibited without a license
from Microsoft or an authorized Microsoft
subsidiary and third parties.
Copyright 2001 Seiko Epson
Corporation. All Rights Reserved.
PRINT Image Matching is a
trademark of Seiko Epson
Corporation.
The PRINT Image Matching logo is a
trademark of Seiko Epson Corporation.
The HMM-Based Speech Synthesis Engine
in this product uses the Simplified BSD
License.
--------------------------------------------------
The HMM-Based Speech Synthesis System
(HTS)
hts_engine API developed by HTS Working
Group(
http://hts-engine.sourceforge.net/)
--------------------------------------------------
Copyright ©
2001-2010 Nagoya Institute of Technology,
Department of Computer Science
2001-2008 Tokyo Institute of Technology,
Interdisciplinary Graduate School of Science
and Engineering
All rights reserved.
Redistribution and use in source and
binary forms, with or without modification,
are permitted provided that the following
conditions are met:
- Redistributions of source code must retain
the above copyright notice, this list of
conditions and the following disclaimer.
-
Redistributions in binary form must
reproduce the above copyright notice, this
list of conditions and the following disclaimer
in the documentation and/or other materials
provided with the distribution.
- Neither the name of the HTS working
group nor the names of its contributors
may be used to endorse or promote
products derived from this software
without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY
THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE
COPYRIGHT OWNER OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS
OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
86
Others
Unlocking SIM
This FOMA terminal supports SIM unlock.
When the SIM is unlocked, other operator
company’s SIM cards can be used with your
FOMA terminal.
Contact your nearest docomo Shop for
unlocking SIM.
You are charged separately a charge for
unlocking SIM.
If other operator company’s SIM is used,
restrictions may be applied to some of
the services or the functions. Note that
NTT DOCOMO, INC. cannot provide any
guarantees for operating the FOMA terminal
when using other company’s card.
For further details on the SIM unlock, refer
to the DOCOMO website.
87
Others
Index
A
AC adapter ...........................................21
After-sales service ...............................68
Alarm ....................................................60
Antenna ..................................................4
Area mail ..............................................46
Auto-sort ..............................................45
Auto timer ............................................52
B
Back cover .............................................4
Backlight .............................................. 32
Bar code reader ...................................61
Battery level .........................................23
Battery pack ........................................20
Attaching/removing ...........................20
Charging ...........................................21
Bluetooth antenna .................................4
Bluetooth function ............................... 62
Bookmark ............................................50
C
Call/charging indicator .......................... 4
Caller ID notification ............................ 22
Call forwarding service ........................41
Call rejection setting ............................37
Call waiting service .............................41
Camera .............................................4, 51
Channel setting ....................................54
Character entry ....................................30
Line feed ...........................................30
Pictograms ........................................30
Smiley ............................................... 30
Symbols ............................................ 30
Character size ......................................33
Charging ..............................................21
Charging terminal ..................................4
Check mail/message ........................... 45
Command navigation key ...................25
Connector terminal ................................4
Connector terminal cover ...................17
Continuous shooting ...........................52
Copyrights ...........................................83
D
Deco-mail .............................................44
Decome-Anime .................................... 45
Desktop holder ....................................21
Dial lock ...............................................36
Dial/received list .................................. 38
Display .............................................3, 23
DOCOMO connection manager .......... 66
docomo mini UIM card ........................20
docomo Palette UI ...............................28
Draining water .....................................19
E
Early warning “Area Mail” ...................46
Earphone ................................................4
Earpiece ................................................. 3
Earpiece volume ..................................39
eco mode ............................................. 34
eco mode autostart .............................34
eco mode setting .................................34
ECO NAVI .............................................24
Emergency call ....................................42
English display .....................................22
Error information send setting ............70
Export administration regulations ......83
F
Finder display ......................................51
FOMA antenna .......................................4
Full browser .........................................49
Function list ......................................... 74
G
Guide ....................................................29
H
Holding .................................................38
I
i-αppli ...................................................57
i-channel .............................................. 50
i-concier ............................................... 59
Illumination setting ..............................33
i-mode ..................................................48
88
Others
i-mode fault diagnosis site ..................70
i-mode mail .......................................... 44
Compose ..........................................44
Forward .............................................45
Receive .............................................45
Reply .................................................45
Send ..................................................44
i-mode password .................................35
i-motion ................................................58
Infrared communication ......................66
Infrared data port.............................4, 66
Initialize ................................................37
Initial setting ........................................22
Intellectual property right ....................83
International call ..................................39
International roaming .......................... 42
i-Widget ...............................................57
K
Keypad lock .........................................37
Keypad sound......................................32
Kisekae tool .........................................33
Koe-no-takuhaibin ...............................38
L
Light sensor ...........................................3
List of materials used .......................... 12
M
Machi-chara setting ............................33
Mail .......................................................44
Main menu ...........................................26
Main specifications .............................78
Making a call ........................................38
Making a videophone call ...................38
Manner mode.......................................31
Menu icon ............................................26
Microphone ............................................3
microSD card .......................................63
Back up/restore ................................65
Check ................................................64
Copy .................................................64
Format ...............................................64
Inserting/removing ............................63
Multi one-touch function .....................27
Multi one-touch key.........................3, 27
MUSIC player .......................................56
MyFACE ............................................... 28
N
Navigation displays .............................25
Network security code ........................35
Network services .................................40
Notification icon ..................................24
Numeric keys ......................................... 3
O
Omakase lock ...................................... 36
One-push open button ..........................4
Options ................................................73
Original .................................................31
Original lock .........................................37
Outdoor mode .....................................32
Out-of-service-area indication ............23
Overseas use .......................................42
Own number ........................................ 22
P
Part names and functions .....................3
PC connection .....................................66
Phonebook ..........................................47
Add to phonebook ............................47
Delete data ........................................47
Edit phonebook ................................47
Search phonebook ...........................38
Picture album .......................................52
PIN1 code ............................................ 35
PIN1 code entry set .............................36
PIN2 code ............................................ 35
PIN unblocking key (PUK) ...................36
Playing moving picture ..................52, 58
Portrait rights ....................................... 83
Power on/off ........................................22
Power saver mode ..............................32
Profile ...................................................22
Public mode (Drive mode) ...................40
Public mode (Power off) ......................40
Q
QR code ............................................... 61
R
Radio waves reception level ............... 23
Receiving a call ...................................39
Receiving a videophone call ............... 39
89
Others
Record message .................................39
Related devices ................................... 73
Reset settings ......................................37
Ring volume .........................................31
S
SAR ......................................................80
Scanning function................................72
Schedule ..............................................60
Screen memo .......................................50
Security codes .....................................34
Security scan function
(Scanning function)..............................72
Select language ...................................22
Select ring tone ...................................31
Shabette-Kensaku ...............................59
Shooting moving pictures ...................51
Shooting still images ...........................51
Shortcut ...............................................29
Simple menu ........................................26
Site access ..........................................48
SMS ......................................................46
Compose ..........................................46
Receive .............................................46
Send ..................................................46
Software update ..................................70
Speaker ..................................................4
Specific absorption rate ......................80
Stand-by display ...........................26, 32
Stand-by shortcut................................24
Start by voice .......................................60
Status icon ........................................... 23
Strap hole ..............................................4
Sub-display ......................................4, 24
Submenu ..............................................26
T
Terminal security code ........................35
Timer recording ...................................55
Trademarks ..........................................83
Troubleshooting ................................... 67
TV timer ................................................55
U
Update (Pattern data) .......................... 72
V
Vibrator setting ....................................31
Video ....................................................55
Video recording ................................... 55
View blind ............................................33
Viewer display......................................54
Viewing still images ............................. 52
Voice mail service ................................41
W
Warranty ...............................................68
Waterproof/dust-proof performance ..16
WMA file ...............................................55
WORLD CALL ......................................39
WORLD WING......................................42
Numerics
1Seg .....................................................53
1Seg antenna .........................................4
90
Access the following for checking or changing the contents of your contract, or for applying to respective services, and asking for
related documents:
ｉMenu
▶
お客様サポート (User support)
▶
お申込・お手続き (Applications/Procedures)
▶
各種お申込・お手続き (Respective applications/procedures)
My docomo (http://www.mydocomo.com/)
▶
各種お申込・お手続き
From i-mode
Packet communication charges free
From PC
“お客様サポート (User support)” and My docomo are available in
Japanese only.
You will need your “Network Security Code” for the access from i-mode.
No packet communication charges are incurred for the access
from i-mode. Accessing from overseas will incur charges.
You will need your “docomo ID/password” for the access from a PC.
If you do not have or you have forgotten your “Network Security
Code” or “docomo ID/password”, contact “General Inquiries” listed
on the back page of this manual.
You may not be able to access the site depending on the details of
your subscription.
You may not be able to access the site due to system maintenance, etc.
Using mobile phone with your manners!
When using your mobile phone in a public place, don’t
forget to show common courtesy and consideration for
others around you.
In the following cases, be certain to turn off the power.
■Where use is prohibited
When using this mobile phone on an airplane or at a hospital,
follow the instructions of the airline or medical institution. In areas
where mobile phone usage is prohibited, turn off the power.
In the following cases, be certain to set Public mode.
■While driving
Using the mobile phone in your hand while driving is subject to
punishment. This does not apply in unavoidable circumstances
when, for instance, responding to someone who is sick, injured or
when maintaining public order.
■When in theaters, movie theaters, museums, and similar
venues
Respect the privacy.
Please be considerate of the privacy of individuals around you
when shooting and sending photos using camera-equipped
mobile phones.
An Environment Protection Program by
DOCOMO
Simplified Version of the Manual
We have edited the traditional instruction manual to simplify
the descriptions of basic operational procedures for respective
functions. As a result, we have succeeded to reduce the
consumption of paper used.
For the functions frequently used and more detailed descriptions,
you can refer to “使いかたガイド (Guide)” (in Japanese only) that
comes with the FOMA terminal and the DOCOMO website.
Collection and Recycling of Mobile Phones
We collect mobile phones and related equipment that
you no longer need even if it is not docomo product.
Please bring them to your local docomo Shop.
*Acceptable Products: Mobile phones, PHS
terminals, battery chargers,
and desktop holders
(regardless of the provider)