Panasonic Mobile Communications 209023A UMTS/ GSM Cellular Mobile with Bluetooth®, WLAN and RFID User Manual BEGIN E OI 091214

Panasonic Mobile Communications Development of Europe Ltd UMTS/ GSM Cellular Mobile with Bluetooth®, WLAN and RFID BEGIN E OI 091214

User Manual 2 of 7

Call22-14Viewing Call Logs1 Redial  Outgoing Call Logs  Phone Book  Call Log   Outgoing Call Logs   Incoming Call LogsRecords appear.View Missed Calls ■Main Menu >  Phone Book  Call Log  Incoming Call Logs   Missed CallsUnknown Calls 󱛠 appears in Call Log for unchecked calls.NoteNewest record appears at top of list. Names appear if saved in Phone  󱛠Book.Call Log records remain even if 941P is turned off. 󱛠When the maximum number of records are saved, oldest is deleted first. 󱛠Incoming Call Logs can also be opened from  󱛠Main Menu   Phone Book  Call Log  Incoming Call Logs  All CallsMissed Calls records can be viewed with handset closed ( 󱛠P.1-23).RedialMaking Calls from Call Log1  Open Call Logs ( Left)2 Voice CallsHighlight a phone number or name   Video CallsHighlight a phone number or name  [V. Call] International CallsSelect a phone number or name  [Menu]   Int'l dial assist  Select a country/region   /[V. Call]TBDBEGIN_E_OI.indb   14 2009/12/14   16:27:24
Call22-15Functions Available from Call LogHighlight a call record and press  [Menu].Available functions vary by selected log/record. 󱛠Item Operation/DescriptionNotify caller IDNotify or withhold your Caller ID ( P.2-3)Prefix numbersAdd a prefix to phone number before dialingSelect an entry  > Int’l dial assistAdd international dialing prefixSelect a country/region  > Character size Toggle font sizeAdd to  Phone BookSave number to Phone Book ( P.4-5)Ring time 1Show ring time  (missed calls)Add shortcut iconCreate a shortcut ( P.1-22)Compose  S! MailCreate S! Mail(From Step 4 on P.13-4)Compose  SMS 2Create SMS(From Step 4 on P.13-7)Received address/ Sent addressShow Received/Sent address logDelete this/ Delete selected/Delete allDelete record(s) in selected list >1  Available only for Incoming Call Logs2  Message can be sent to SoftBank handsets onlyAnswer PhoneRecord up to five voice messages for Voice Calls or up to two for Video Calls (up to 20 seconds per message) on 941P.When Answer Phone is active,  󱛠 –   (Voice Call) or   –  (Video Call) appears in Standby.Unavailable when: handset is off or in Emission OFF Mode;  󱛠 appears. Use Voice Mail ( P.2-18).Activating/Canceling Answer Phone<Default> OFF1  Press and hold To cancel: Press and hold  󱛠 againRedirect a Call to Answer Phone ■ >[Ans. Ph] or NoteAlternatively, activate/cancel from  󱛠Main Menu  Tools   Sound Recorders  Answer Phone Setting  ON or OFFWhen full, new messages cannot be recorded even if Answer Phone is  󱛠activated. Delete old messages.While Manner Mode (set for User Mode) is active, Answer Phone  󱛠setting for User Mode ( P.18-7) is prioritized.TBDBEGIN_E_OI.indb   15 2009/12/14   16:27:26
Call22-16Playing MessagesWhen a new message is recorded,Event Indicator appears ( P.1-21)  in Standby.1 Select indicator2  Select a messagePlayback starts.After playback ends, indicator disappears.NoteAlternatively, press  󱛠 in Standby (for Voice Call messages) or  Main Menu  Tools  Sound Recorders  Voice Call Data or Video Call Data  Select a recordingPlay Recorded Caller's Voice/Video ■Main Menu >  Tools  Sound Recorders  Voice Call Data or Video Call Data  Call DataAnswer Phone FunctionsFrom Main Menu  Tools  Sound RecordersSelect Outgoing Message/ ■Set Ring TimeAnswer Phone Setting >  ON  Select a message  Enter ring timeWhen Answer Phone and Optional Service (Voice Mail or Call Forwarding)  󱛠are both active, function with shorter ring time takes priority.  For example, if Answer Phone ring time is 18 seconds and Optional Service is 20 seconds, Answer Phone responds first (Priority may change due to signal conditions.).Delete Recorded Call Data ■Voice Call Data > or Video Call Data  (Highlight an item)   [Menu]  Erase this, Erase rec. msg., Erase Call Data* or Erase all  YES* Video Call Data onlyTBDBEGIN_E_OI.indb   16 2009/12/14   16:27:27
Call22-17Optional ServicesOverviewFor details, visit SOFTBANK MOBILE Corp. Website  󱛠(http://www.softbank.jp).Call Forwarding(Right)Forward unanswerable calls to a preset number when handset is off, out-of-range, etc.Voice Mail(P.2-18)Unanswered calls are forwarded to Voice Mail Center as set or when handset is off, out-of-range, engaged, etc.Missed Call Notification ( 󱛠P.2-19)Call Waiting*(P.2-20)Place the current call on hold and answer a second, or alternate between calls.Call Barring (P.2-20)Restrict calls by condition.While Call Forwarding or Voice Mail Service  󱛠is active, Bar All Outgoing and  Bar All Incoming are not available (Call Forwarding or Voice Mail Service is prioritized.).Caller ID (P.2-21) Show or hide your number when calling.* Separate subscription required.Call ForwardingCall Forwarding and Voice Mail cannot be set simultaneously. 󱛠When forwarding Video Calls, set a destination phone that supports  󱛠3G-324M standard video calls. If not, Video Calls are not forwarded.Activating Call ForwardingMain Menu  Settings  Call Settings   Voice Mail/Call Fwding  Call Forwarding ON1  Select a type2  Enter a destination phone number 󱛠 to select number from Phone Book.3  Select an item (See below)Item Operation/DescriptionRinger ON Forward missed callsSelect a ring time  > YESRinger OFF Forward all calls without ringing/vibratingYES >Check Call Forwarding Status ■  >Main Menu  Settings  Call Settings  Voice Mail/Call Fwding  Get Status BEGIN_E_OI.indb   17 2009/12/14   16:27:27
Call22-18Cancel Call Forwarding ■  >Main Menu  Settings  Call Settings  Voice Mail/Call Fwding  Deactivate All  YESNoteToll free numbers and international call numbers cannot be saved as a  󱛠destination number.When using Call Forwarding together with Answer Phone, the function  󱛠with shorter ring time takes priority (Priority may change due to signal conditions.).When  󱛠Ringer ON is set, following operations are available while 941P is ringing (within ring time):To answer call: ・ To forward call: ・  [Menu]  Call ForwardingVoice MailCalls are forwarded to Voice Mail Center via Call Forwarding function;  󱛠Call Forwarding and Voice Mail cannot be set simultaneously.Voice Mail is not available for Video Calls. 󱛠Activating Voice MailMain Menu  Settings  Call Settings   Voice Mail/Call Fwding  Voice Mail ON1  Select an item (See below)Item Operation/DescriptionRinger ON Forward missed callsSelect a ring time  > YESRinger OFF Forward all calls without ringing/vibratingYES >Check Voice Mail Status ■Main Menu >  Settings  Call Settings  Voice Mail/Call Fwding  Get StatusCancel Voice Mail ■Main Menu >  Settings  Call Settings  Voice Mail/Call Fwding  Deactivate All  YESBEGIN_E_OI.indb   18 2009/12/14   16:27:28
Call22-19NoteWhen using Voice Mail together with Answer Phone, the function with  󱛠shorter ring time takes priority (Priority may change due to signal conditions.).When  󱛠Ringer ON is set, following operations are available while 941P is ringing (within ring time):To answer call: ・ To forward call: ・  [Menu]  Call ForwardingChecking Voice Mail MessagesEvent Indicator ( P.1-21) and   appear in Standby when new messages are recorded.1    Select indicator  YESFollow voice guidance. 󱛠Indicator and   disappear after messages are checked.View Details ■View callers' phone numbers and date/time Voice Mail messages were left before playing messages.Activate  󱛠Missed Call Notification beforehand. >  Voice Mail Notif.  [ ]Delete  ■ Indicator  >Main Menu  Settings  Call Settings  Voice Mail/Call Fwding  Delete Voice Mail Icon  YESNoteAlternatively, follow these steps to check Voice Mail:   󱛠Main Menu  Settings  Call Settings    Voice Mail/Call Fwding  Listen to Voice Mail  YESMissed Call NotificationWhen Missed Call Notification function is active, Event Indicator appears for calls missed while 941P was off, out-of range, engaged etc.Available only when Voice Mail is active. 󱛠Main Menu  Settings  Call Settings  Missed Call Notifi.1 YES941P connects to the Network.Follow voice guidance. 󱛠When Calls are Received while Missed Call Notification is Active…Event Indicator appears for missed calls when  941P is turned on or comes into range. Select indicator to view Missed Calls.Voice mail 󱛠 indicator appears when Voice Mail messages are recorded ( Left).TBDTBDBEGIN_E_OI.indb   19 2009/12/14   16:27:31
Call22-20Call WaitingActivating/Canceling Call WaitingMain Menu  Settings  Call Settings  Call Waiting1 Activate or Deactivate  YESCurrent status appears.Check Call Waiting Status ■Main Menu >  Settings  Call Settings  Call Waiting   Get StatusAnswering Second Call1  When tone sounds,  󱛠 to alternate between calls. 󱛠 to disconnect active call.When the party hangs up, active call ends. 󱛠 󱛠 to re-engage the party on hold.When a second call comes in while first call is on hold, hold status  󱛠is canceled and first call resumes.Reject Second Call ■When tone sounds,  >[Menu]  Call RejectionNoteWhen Voice Mail or Call Forwarding is set to  󱛠Ringer ON while Call Waiting is active, unanswered calls are transferred to Voice Mail Center or the forwarding number.When Voice Mail or Call Forwarding is set to  󱛠Ringer OFF, Call Waiting is disabled.Call BarringSecurity Code is required  ( 󱛠P.1-28).Activating/Deactivating Call BarringMain Menu  Settings  Call Settings  Call Barring1  Select an item (See below)Item Operation/DescriptionBar All Outgoing Restrict all non-emergency callsBar All Int'l Allow only domestic callsBar Int'l Restrict all international calls except to JapanBar All IncomingReject all callsBar All RoamingReject calls when outside Japan2 Activate or Deactivate  YES3  Enter Security CodeBEGIN_E_OI.indb   20 2009/12/14   16:27:31
Call22-21Check Call Barring Status ■After Step 1,  >Get StatusCancel All Call Barring ■In Step 1,  >Cancel All Barring  Enter Security CodeChange  ■Security CodeIn Step 1,  >Set Security Code  Enter current Security Code  Enter new Security Code  Reenter Security CodeNoteEmergency numbers (110, 119, 118) are dialable even while Call  󱛠Barring for outgoing calls is active.If call is attempted when Call Barring is active, warning message  󱛠appears. It may take longer to appear in some areas. Check Call Barring settings if the message does not appear.Caller ID<Default> Network SetMain Menu  Settings  Call Settings   Show My Number  Activate1 ON, OFF or Network SetNetwork Set  󱛠Caller ID setting varies by subscription.Check Caller ID Status ■Main Menu >  Settings  Call Settings  Show My Number   Check SettingNoteAlternatively, enter these numbers/symbols before the phone number to  󱛠show or hide Caller ID: Show:   or   Hide:   or BEGIN_E_OI.indb   21 2009/12/14   16:27:36
Call22-22BEGIN_E_OI.indb   22 2009/12/14   16:27:36
33-1Text EntryText Entry .............................................................. 3-2Entering Text ......................................................... 3-3Entering Characters ....................................................................3-3Pictographs & Symbols ...............................................................3-4Templates ...................................................................................3-5Additional Features.....................................................................3-5Conversion Methods (Japanese) ........................... 3-6Predictive Conversion .................................................................3-6Converting Hiragana to Katakana/Alphanumerics ........................3-7Conversion ................................................................................. 3-8Editing Text ........................................................... 3-9Deleting & Replacing ..................................................................3-9Copy/Cut/Paste ...........................................................................3-9User's Dictionary ................................................ 3-10Saving User's Dictionary Entries ................................................3-10Download Dictionary .......................................... 3-10Activating Downloaded Dictionaries ..........................................3-10BEGIN_E_OI.indb   1 2009/12/14   16:27:36
Text Entry33-2Text EntryEnter alphanumerics, hiragana, kanji, katakana, symbols and pictographs.Three types of character input methods are available: Mode 1 (5-touch),  󱛠Mode 2 (2-touch), Mode 3 (NIKO-touch) In this guide, examples are described in Mode 1 (5-touch).Mode 2 (2-touch)/Mode 3 (NIKO-touch)Press two numeric keys to enter a character.List of Key Assignments ( 󱛠P.19-15 to 17) ■HelpHelp describes text entry operations.In text entry window,  >[Menu]  Help  Select an item󱄌❶ Character Input Methods Operations: Mode 2 (2-touch): Mode 3 (NIKO-touch)No icon appears for Mode 1 (5-touch). 󱛠Press and hold  [Mode]󱄌❷ Input Modes* Operationsabc: Alphanumerics123: Numbers漢: Kanji (hiragana)カナ: Katakana[Mode]󱄌❸ Double-byte/Single-byte* Operations1/1: Double-byte1/2: Single-byte[Menu]   2bytes character  (1byte character)󱄌❹ Remaining/Maximum Bytes in Message* Operations in Mode 3 (NIKO-touch):  P.19-17❶❷❸❹TBDBEGIN_E_OI.indb   2 2009/12/14   16:27:41
Text Entry33-3Entering TextEntering CharactersExample: Enter 鈴木1  In alphanumerics mode,   twice to switch to kanji (hiragana) modeす:   three timesず:  *    three times  き:   twice*  When the next character is on the same key, press   first to move   cursor.2   to enter Predictive  Candidates ListTo change word before converting, press  󱛠.There are four types of word suggestion  󱛠lists: Predictive Candidates, Conversion Candidates,  Context Forecast and  abc/123/Kana Candidates ( P.3-6) 3   to select 鈴木Other Input Functions ■Enter katakana/alphanumericsPress  [Mode] several times to select an input mode  Enter charactersEnter small kana  (っ, ッ, etc.)Enter a character   to convert to small characterAlternatively, press a key repeatedly  󱛠to enter an assigned small kana.Enter upper case charactersEnter a character    󱛠Alternatively, press a key repeatedly to enter an assigned upper case character.Add ゛or ゜Enter a character to add ゛or ゜    for ゛or   twice for ゜  󱛠In single-byte katakana mode, ゛and ゜ are entered as a single-byte character.Insert line breakPress [Line FD] to insert line breaks in textInsert space at end of textInsert space within textPress   repeatedly until single-byte space appears*, or  [Menu]  Pictograms/symbols  Space to enter a space (Double-byte (single-byte) space is entered in 2 bytes (1 byte) input mode.)Toggle characters in reverse order[Rev]Example: From c, press to toggle as follows: c  b  a  2…Move cursor to beginning/end of sentence[Menu]  Jump  To beginning or To endUndo [Undo]*  Space cannot be entered within text in number mode by following the steps above. Use symbol list.TBDTBDBEGIN_E_OI.indb   3 2009/12/14   16:27:54
Text Entry33-4Pictographs & SymbolsPictographs do not appear in messages sent to incompatible SoftBank  󱛠handsets or e-mail.1 PictographsIn kanji (hiragana)/katakana/alphanumerics mode, SoftBank pictograph list appears. SymbolsPress and hold Single-byte symbol list appears.2   to select a pictograph or symbolSymbol List:  󱛠P.19-18NoteAlternatively, follow the steps to access pictograph or symbol:   󱛠[Menu]  Pictograms/symbolsList Log may appear first. 󱛠Entering Cross-carrier PictographsPress   or   to toggle lists (Universal pictograph list, Log, Full pictograph list and My Pictograms). Functions Available in Pictograph/Symbol List ■Enter same pictograph or symbol again [Cont.]Toggle pictograph/symbol list [Pict./Symbol]Jump to previous/next page /Toggle full screen/standard screenToggle double/single-byte symbol and log [symbol list only][1byte/2bytes/Log] 󱛠 to toggle in reverseToggle pictograph lists [pictograph list only][Univrsl. 1/Full/My Pict. 2/ NxtMyPic 2/Log] 󱛠 to toggle in reverseClose list1   In S! Mail Subject/Text/Signature field or Subject field for Auto-sort Setting only2  In S! Mail Text field onlyBEGIN_E_OI.indb   4 2009/12/14   16:27:58
Text Entry33-5TemplatesInsert templates (greetings, URLs, emoticons) or edit preinstalled templates.Inserting Templates1  In text entry window, press and hold Not available in number mode. 󱛠2  Select a category  Select a templateNoteAlternatively, in a text entry window,  󱛠[Menu]  Input assistance  Templates to enter a templateEditing TemplatesMain Menu  Tools  Templates/Users Dic.  Templates1  Select a category2  Highlight a template  [Edit]  Edit templateReset Edited Templates ■After Step 1, (highlight a template > )  [Menu]  Reset this or Reset all ( For Reset all, enter Phone Password)  YESManage Template Folders ■In Step 1, highlight a category >  [Menu]  Edit folder name  Edit folder nameTo reset folder name,  󱛠[Menu]  Reset name  YESAdditional Features1 In text entry window,  [Menu]  Input assistance2  Select an item (See below)Item Operation/DescriptionKuten Code Enter a character code ( P.19-19)Enter a character code (4 digits) >Input date/timeSelect a style to enter date/timeSelect a display style >  Enter date/timeQuote phone bookQuote Phone Book entry detailSelect an entry >  Check item(s) to quote   [Finish]Quote accnt detlsQuote Account DetailsEnter Phone Password >  Check item(s) to quote  [Finish]Bar code readerActivate Bar Code Reader to insert scanned result  (P.12-11)BEGIN_E_OI.indb   5 2009/12/14   16:27:58
Text Entry33-6Conversion Methods (Japanese)Predictive ConversionThe following suggestion lists appear while entering text orafter a word is fixed.While Entering TextPredictive CandidatesLists likely conversions (Predictive Candidates) and matching conversions (Conversion Candidates)Predictive Candidates わ  私, わたし, etc.Conversion Candidates わ  和, 輪, etc.Conversion CandidatesSuggests matching conversionsExample: わ  和, 輪, etc.abc/123/ Kana CandidatesLists alphanumerics/katakana assigned to key ( P.3-7)After a Word is FixedContext ForecastSuggests words likely to followExample: 私 is fixed  です, の, は, etc.Predictions change with each letter entered. 󱛠Press  󱛠[Pred.]/[Conv.] to toggle Predictive Candidates List and Conversion Candidates List.Note941P learns entered characters and suggests them for future  󱛠conversions ( P.3-8).Example: Enter 私の鼻1  In kanji (hiragana) mode, わ is entered and Predictive Candidates List appears.2   to move to Predictive Candidates List   to select 私私 is entered and Context Forecast List appears.3   to move to Context Forecast  List   to select のの is entered and Context Forecast List appears.4    はな is entered and Predictive Candidates List appears.5 [Conv.]Conversion Candidates List appears.TBDTBDBEGIN_E_OI.indb   6 2009/12/14   16:28:07
Text Entry33-76   to move to Conversion  Candidates List   to select  鼻If the Word is Not ListedPress   to return to hiragana, and segment hiragana to convert separately.Example: Segment はるか into はる and か, then convert to 春香① Move cursor to る, then convert はる to 春  ② Convert か to 香  Using Previously Entered WordsEnter the first one or two hiragana to access previously enteredwords in the list.Converting Hiragana to Katakana/AlphanumericsEnter katakana and alphanumerics in kanji (hiragana) mode. Date and time can be entered quickly.Example 1: Enter OKStep 1 2 3 4Key (3 times) (twice) [a1Kana]Display ふふにabc/123/Kana Candidates OKPress  󱛠 after highlighting OK.Example 2: Enter 10:30 or 10/30Step 1 2 3Key [a1Kana]Display あわさわ abc/123/Kana Candidates10:30or10/30Press  󱛠 after highlighting 10:30 or 10/30.TBDBEGIN_E_OI.indb   7 2009/12/14   16:28:10
Text Entry33-8ConversionViewing Learned Words1  In text entry window,  [Menu]   Text entry setting  Learned words2  Select a row  Select a logDelete Learned Words ■In Step 2, (highlight a log > )  [Menu]  Delete this or Delete all  ( For Delete all, enter Phone Password)  YESTipSettings  ●Set Learning Feature Off for Secret Mode/Secret Data Only  ●Delete All Learned Words ( P.18-10)Activating/Canceling Prediction List<Default> ON1  In text entry window,  [Menu]   Text entry setting2  Select an item (See below)Item Operation/DescriptionPredict Activate/cancel Predictive Candidates and Context Forecast lists.Candidate displayActivate/cancel Context Forecast list.2/NIKO-touch guideActivate/cancel Conversion Candidates guidance for  2/NIKO-touch input method.3 ON or OFFFixing Entered Characters Automatically<Default> OFFFix character in Mode 1 (5-touch) automatically after specified time elapses.1  In text entry window,  [Menu]   Text entry setting2 Character set time  Select a speedBEGIN_E_OI.indb   8 2009/12/14   16:28:10
Text Entry33-9Editing TextDeleting & Replacing1  Delete Characters within LinesPlace cursor before a character  A character after cursor is deleted.Press and hold  󱛠 to delete all characters after cursor.  Delete Characters from the End of TextPlace cursor at the end of text  A character before cursor is deleted.Press and hold  󱛠 to delete all characters before cursor.2  Enter another characterCopy/Cut/PasteCopy/cut text (up to 5000 double-byte/10000 single-byte) and paste to another place.1  In text entry window,  [Menu]  Copy or Cut2  Select Text to Copy/CutPlace cursor before (or after) text to select   [Start]  Place cursor after (or before) text   [End] Select All[All]  [End]3  Place cursor at target location  [Menu]  PasteBEGIN_E_OI.indb   9 2009/12/14   16:28:11
Text Entry33-10User's DictionarySave frequently used words/phrases (up to 100 entries). Saved words/phrases appear among word suggestions.Saving User's Dictionary Entries1 In text entry window, [Menu]   Text entry setting  User's Dictionary2 <New>3  Enter a word  Enter readingEdit User's Dictionary Entries ■After Step 1, highlight a word >  [Edit]  Edit word  Edit readingDelete User's Dictionary Entries ■After Step 1,  >[Menu]  Delete  Delete this or Delete all  ( For Delete all, enter Phone Password)  YESNoteAlternatively,  󱛠Main Menu  Tools  Templates/Users Dic.   User's DictionaryDownload DictionaryDownload dictionaries from P-egg, a download site for 941P users (see below). Activate downloaded dictionaries to add character conversions to conversion suggestions (Japanese).P-egg (as of May 2009)  󱛠Yahoo! Keitai top page  メニューリスト  辞書・ツール   ケータイメーカー  P-eggActivating Downloaded DictionariesMain Menu  Tools  Templates/Users Dic.   Download Dictionary1  Select a dictionary★ appears next to active dictionary.To cancel: follow the same step 󱛠Change Title ■In Step 1, highlight a dictionary >  [Menu]  Edit title  EditView Details ■In Step 1, highlight a dictionary >  [Menu]  Dictionary infoDelete Dictionaries ■In Step 1, (highlight a dictionary) >  [Menu]  Delete this or  Delete all ( For Delete all, enter Phone Password)  YESBEGIN_E_OI.indb   10 2009/12/14   16:28:11
44-1Phone BookOverview .............................................................. 4-2Saving to Phone Book .......................................... 4-3Phone Book Entry Items ..............................................................4-3Create New Entry .......................................................................4-3Other Ways to Add New Entries ..................................................4-5Setting Groups ...........................................................................4-6Searching/Using Phone Book ................................ 4-6Making Calls from Phone Book ...................................................4-6Using Phone Book ......................................................................4-7Managing Phone Book ......................................... 4-9Editing Phone Book Entries .........................................................4-9Deleting Phone Book Entries .......................................................4-9Copying/Deleting Phone Book Data ............................................4-9Phone Book Memory Status ......................................................4-10S! Addressbook Back-up..................................... 4-10Manual Synchronization ...........................................................4-11Auto Synchronization ................................................................4-12Viewing Sync Log .....................................................................4-12Account Details .................................................. 4-13Editing Account Details .............................................................4-13Account Details Functions .........................................................4-13Voice Dial ............................................................ 4-14Adding Entries to Voice Dial ......................................................4-14Searching Entries by Voice Dial ..................................................4-14BEGIN_E_OI.indb   1 2009/12/14   16:28:12
4-2Phone Book4OverviewSave frequently used phone numbers and mail addresses to Phone Book.NoteBack-up Important Information 󱛠 Keep a separate copy of Phone Book entry information. When battery is exhausted or removed for extended periods, entries may be lost. Handset damage may also affect data recovery. SoftBank is not liable for damages from lost/altered entries.Supplement phone numbers and mail  addresses with birthday, street address, an image or notes.Set tones/image for each entry. Sort entries into Groups.Tip●Phone Book Memory Status ( P.4-10)●Backing up to microSD Card ( P.9-19)TBD TBD TBDBEGIN_E_OI.indb   2 2009/12/14   16:28:17
Phone Book44-3Next PageSaving to Phone BookPhone Book Entry ItemsSave up to 1000 entries in Phone Book. Save phone numbers or mail addresses etc. in USIM Card Phone Book. Up to 50 entries can be saved to USIM Card Phone Book. 󱛠Phone Book Entry Items 941P USIM CardBasic itemName (Reading) ○○Group 19 10Phone number 4 2Mail address 3 1Address ○̶Location information ○̶Birthday ○̶Memo ○̶Image 100 ̶Memory number 000 - 999 ̶Incoming SettingsRingtone○̶VibratorNotification LightScreenMsg RingtoneMsg VibratorMsg Notif. LightAnswer message○: Can be saved  ̶: Cannot be saved Phone Book entries in USIM Card can also be used in another SoftBank  󱛠handset.Create New EntrySave new entries to 941P or USIM Card Phone Book. When saving to USIM Card Phone Book, set  󱛠Save Settings to USIM or Ask Every Time beforehand ( P. 1 8 - 1 1 ) .1  Press and hold 2  Enter Last name   Enter First nameFor 941P Phone Book,  󱛠 to switch  Basic item and Incoming Settings tabs.941P Phone BookTBDBEGIN_E_OI.indb   3 2009/12/14   16:28:20
Phone Book44-43  Select an item (See below)Item Operation/DescriptionName(First/Last)Save first and last names separately. For USIM Card, enter both names togetherEnter name >Reading(First/Last)Save first and last name readings separately. For USIM Card, enter both readings togetherEnter reading >Group Select a group >Phone numberEnter phone number ( > For 941P, select an icon)Mail address Enter mail address ( > For 941P, select an icon)Save only phone number if mail address is "phone  󱛠number@softbank.ne.jp".Address Enter zip code  > Enter addressLocation informationIdentify handset location and save information. Also, save location record selected from location logsSelect an item > ・ By position loc.  YES  Check information   [Set] (To show information while positioning: When [Use] appears at lower right of display, press  [OK]. To retry positioning:  [Retry]) ・ From loc. history  Select a location record to saveBirthday Enter birthday >Memo Enter memo >Item Operation/DescriptionImage Save a still image to appear for incoming callsSelect an item >Select image・    Select a folder  Select a file ・ Shoot image  Frame subject   [Record]/ /   [Save]/ / Saved still image appears for an incoming call only when  󱛠Phone Book Image ( P.18 - 7 )  i s  ON. If there is an image saved for Screen, the image preferentially appears.Memory numberEnter memory number >Ring toneRing Tones >  Select a type  Select a folder   Select a ringtoneVibratorSelect vibrator >  Select a patternNotification LightSelect illumination >  Select a patternScreen*SEL picture >  Select a screen type  Select a folder  Select an imageStill image saved for  󱛠Screen appears for an incoming call whether Phone Book Image is ON or OFF. Phone Book Image setting applies only when still image is saved for Image.Msg RingtoneRing Tones >  Select a type  Select a folder   Select a ringtoneMsg VibratorSelect vibrator >  Select a patternMsg Notif. LightSelect illumination >  Select a patternAnswer messageSelect answer message >  Select a message*  To cancel: Select RLS pictureBEGIN_E_OI.indb   4 2009/12/14   16:28:28
Phone Book44-54 [Finish]Other Ways to Add New EntriesSave currently displayed phone numbers, mail addresses, still images or location information to Phone Book.Example: Saving Numbers from Incoming Call Logs1    Highlight a record  [Menu]   Add to Phone Book2 New EntryNew  Enter details ( From Step 3 on P.4-4)  Add to Existing EntryAdd  Select entry  Enter other details  (Step 3 on P.4-4)When saving to USIM Card,  󱛠Overwrite appears instead of Add.3 When complete,  [Finish]  YESNotePress  󱛠[Menu] from a function. If Add to Phone Book appears, the information is savable to Phone Book. From a text message window, select Add Address to save entries; from still image list/still image, select Set display  Phone Book to save entries.When adding still images or location information, entries are saved to  󱛠handset regardless of Save Settings.When saving new entries in Secret Mode or Secret Data Only, entries  󱛠are saved to handset regardless of Save Settings.BEGIN_E_OI.indb   5 2009/12/14   16:28:31
Phone Book44-6Setting GroupsSort entries by Group. Custom set ringtones/vibrators/notifications per group.Main Menu  Phone Book  Group 󱛠 appears for USIM Card Group.1  Highlight a group  [Edit]  Select an item  Set itemEnter group name for " 󱛠 Group name."For other item operations:  󱛠P.4-4 Custom settings unavailable for USIM Card Groups.2 When complete,  [Finish]Check Settings ■Select a group entry, or  >[Menu]  Check settingSettings cannot be checked in USIM Card Group Phone Book. 󱛠Reset Group Setting ■Highlight a group  > [Menu]  Reset group  YESSearching/Using Phone BookMaking Calls from Phone Book<Default> A-KA-SA-TA-NA1 2  Search Phone Book (See below)To change search method:  󱛠  Select a search method  (See below)Search Method Operation/DescriptionA-KA-SA-TA-NASearch entries by katakana syllabary. Names saved in Roman characters are saved under the 英 tab.Reading Enter partial reading  > Group Select a group >Memory Number*Enter memory (entry) number to search for an entryEnter a memory number >Name Enter partial name  > Phone NumberEnter partial phone number  > Mail Address Enter partial mail address  > 2-touch Dial* Show entries with memory (entry) numbers 000 - 009* 941P Phone Book only3  Select an entry4 BEGIN_E_OI.indb   6 2009/12/14   16:28:34
Phone Book44-75 Voice CallsHighlight a phone number   Video CallsHighlight a phone number  [V. Call]NoteTo scroll through entries, enter nothing and press  󱛠 (not available in Group or 2-touch Dial).If no matches are found in  󱛠Reading or Memory Number method, entries closest to condition appear.Once a method is selected, same method retains. 󱛠Additional Search/Dialing Methods ■Open Tab Assigned to Key from StandbyPress and hold   – Open search window assigned to key.Enter Partial Number from Standby or during CallEnter partial number  By Memory Number      Enter a memory numberBy Single-digit Memory Number (2-touch Dial)Enter last digit (  –  ) of memory number 000-009  Voice Call:  /Video Call:  [V. Call]Using Phone BookUse Phone Book Entries ■ >  Highlight an entry  [Menu]  Select an item  (See below)Item Operation/DescriptionNew Add a new entry ( From Step 2 on P.4-3)Sort Change display orderSelect an order >Available only when search method ( 󱛠P.4-6) is Name, Phone Number or Mail Address.Send Ir data*( P.10-3)IC transmission*(P.10-5)Send to Bluetooth*(P.10-9)Copy to microSD*Copy an entry to microSD CardYES >To display copied data:  󱛠P.9-18Delete phone bookSelect an item  > Follow steps for selected option  (P.4-9)Character sizeSwitch character size to large/standardSet secret mode/Release secret*Set/cancel Secret Mode for selected entryEntries saved as secret data appear only when   󱛠Secret Mode or Secret Data Only is active  (P.11-9).* Not available in USIM Card Phone BookBEGIN_E_OI.indb   7 2009/12/14   16:28:36
Phone Book44-8Use Entry Details ■ >  Select an entry  [Menu]  Select an item (See below)Item Operation/DescriptionNotify caller IDShow/hide caller ID ( P.2-3)Prefix numbersMake a call using a prefix number ( P.2-3)Int'l dial assistSet International dial assist ( P.2-10)Restrictions* Activate restrictions on specified entry ( P.11-10)Edit Phone BookEdit entry ( From Step 3 on P.4-4)Delete phone bookPhone number > or Delete this  YESItem names vary by selected item:  󱛠Mail address/Address/Location info/Birthday/Memo/ImageAdd shortcut iconCreate a shortcut ( P.1-22)Compose  S! MailCreate a message to mail address of selected entry(From Step 4 on P.13-4)Compose SMSCreate an SMS message to phone number of selected entry ( From Step 4 on P.13-7)Message can be sent to SoftBank handsets only. 󱛠Send Ir data*( P.10-3)IC transmission*( P.10-5)Send to Bluetooth*(P.10-9)Item Operation/DescriptionCopy to microSD*Copy an entry to microSD CardYES >To display copied data:  󱛠P.9-18Copy names Copy a nameCopy phone numbersCopy an itemItem names vary by selected item.  󱛠Copy mail add./Copy address/Copy location info/Copy birthday/Copy memoCharacter sizeSwitch character size to large/standardSet secret mode/Release secret*Set/cancel Secret Mode for selected entryEntries saved as secret data appear only when   󱛠Secret Mode or Secret Data Only is active  ( P.11-9).Copy to USIM/Copy from USIMCopy an entry to USIM CardYES >* Not available in USIM Card Phone BookNoteInsert entry details to a message ( 󱛠P.3-5). BEGIN_E_OI.indb   8 2009/12/14   16:28:36
Phone Book44-9Managing Phone BookEditing Phone Book Entries1    Select an entry  [Edit]2 Edit ( From Step 3 on P.4-4)  YESDeleting Phone Book Entries1    Highlight an entry  [Menu]   Delete phone book2  Select an item (See below)Item Operation/DescriptionDelete thisYES >Delete select Check entries to delete  > [Finish]  YES 󱛠[Menu]  Select all in tab*, Select all,  Release all in tab* or Release all to check/uncheck all entries at a timeDelete all in tab*YES >Delete all Delete all entries (941P/USIM Card Phone Book) including Secret Mode entriesEnter Phone Password  > YES  YES*  Available in A-KA-SA-TA-NA, Reading, Group and Memory Number search methods ( P.4-6)Copying/Deleting Phone Book DataMain Menu  Phone Book  Memory Manager1  Enter Phone Password2  Select an item (See below)Item Operation/DescriptionCopy Copy data between 941P/USIM Card Phone BookCopy to USIM > or Copy from USIMDelete Delete data in 941P/USIM Card Phone BookPhone > or USIM3 Phone Book  Select an entry** To clear, repeat operation.4 [Finish]  YESBEGIN_E_OI.indb   9 2009/12/14   16:28:37
Phone Book44-10Phone Book Memory StatusMain Menu  Phone Book  Memory StatusView 941P/USIM Card Phone Book memory status.S! Addressbook Back-upBack up Phone Book entries to S! Addressbook (network server); synchronize 941P Phone Book with S! Addressbook; restore Phone Book after accidental loss/alteration.Separate subscription is required for this service. 󱛠NotesFully charge battery beforehand ( 󱛠appears).Transmission fees apply to synchronization, backup and restoration. 󱛠Restoration cancels these Phone Book settings: Ringtone, Vibrator,  󱛠Notification Light, Picture, Answer message.Subscription to the service activates Auto Sync Settings during network  󱛠information retrieval to back up edited Phone Book entries. Note that initiating network information retrieval activates Auto Sync Settings even when Auto Sync Settings are OFF. When contract is terminated, check if Auto Sync Settings are OFF ( P.4-12). S! Addressbook is deleted upon contract termination. 󱛠Addresses saved in Address field on 941P Phone Book are  󱛠saved to building name field in S! Addressbook.When number of characters saved in S! Addressbook exceeds  󱛠maximum number of characters savable on 941P Phone Book, excess characters do not appear on 941P Phone Book.BEGIN_E_OI.indb   10 2009/12/14   16:28:38
Phone Book44-11Synchronization/Back-up/RestorationBe careful of back-up/restoration timing or selecting a synchronization  󱛠direction.When no 941P Phone Book entries exist, selecting  󱛠Synchronize,  Sync from Phone or Backup to Server deletes S! Addressbook.When no S! Addressbook entries exist, selecting  󱛠Synchronize,  Sync from Server or Restore from Server deletes all 941P Phone Book entries.Capacity DisparitiesWhen the number of savable items varies between 941P Phone Book  󱛠and S! Addressbook, synchronization reflects lower limit.Transfer to New HandsetsS! Addressbook Back-up-compatible 3G Handsets: Data remains. 󱛠Other 3G Handsets: Service subscription and data remains, but data is  󱛠not accessible via handset (accessible via PCs).V3/V4/V5/V6/V8 Series: Service subscription is terminated and data is  󱛠deleted.Manual SynchronizationMain Menu  Phone Book  S! Addressbook BkUp   Start Sync1 YES  Enter Phone Password2  Select an item (See below)Item Operation/DescriptionSynchronize Synchronize 941P Phone Book with S! AddressbookSync from PhoneSend edited data to S! AddressbookSync from ServerReceive edited data from S! AddressbookBackup to ServerBack up 941P Phone Book to S! AddressbookRestore from ServerRestore S! Addressbook to 941P Phone Book3 YES  OKBEGIN_E_OI.indb   11 2009/12/14   16:28:38
Phone Book44-12Auto SynchronizationMain Menu  Phone Book  S! Addressbook BkUp   Auto Sync Settings  ON/OFF1  Enter Phone Password  ONTo cancel, select  󱛠OFF2  Select an item (See below)Item Operation/DescriptionEvery week Synchronize weekly at specified time of the daySelect a day  > Set start time  Select a sync typeEvery month Synchronize monthly at specified time of the dateEnter a date  > Set start time  Select a sync typeAfter Editing PBSynchronize ten minutes after entries are editedSelect a sync type >3 YESView Auto Sync Settings ■Main Menu >  Phone Book  S! Addressbook BkUp   Auto Sync Settings  Confirm SettingsViewing Sync LogView synchronization/back-up/restoration logs.Main Menu  Phone Book  S! Addressbook BkUp   Sync Log1  Select a logDelete Sync Log ■In Step 1, (highlight a log  >)  [Menu]  Delete this or Delete all  ( For Delete all, enter Phone Password)  YESBEGIN_E_OI.indb   12 2009/12/14   16:28:38
Phone Book44-13Account DetailsSave phone number, mail address, street address, etc. in Account Details.Editing Account Details1    2 [Edit]3  Enter Phone Password  Edit  [Finish]Your subscribing phone number cannot be edited or deleted. 󱛠Account Details FunctionsIn Account Details, press  [Menu] for following operations.Item Operation/DescriptionEdit* Edit Account Details ( From Step 3 above)Character sizeSwitch character size to large/standardDisplay all data*View all saved items such as phone numbers and mail addressesCopy names Copy a nameCopy phone numbersCopy an itemItem names vary by selected item.  󱛠Copy mail add./Copy address/Copy birthday/Copy notepadItem Operation/DescriptionSend Ir data Send details via Infrared ( P.10-3)Alternatively, while Account Details is open, press   󱛠[Ir].IC transmissionSend details via IC transmission ( P.10-5)Alternatively, while Account Details is open, press   󱛠[ICtrans].Copy to microSDCopy details to microSD CardYES >To display copied data:  󱛠P.9-18Account Details is saved as a Phone Book entry. 󱛠Erase phone number*Select an item  > YESDelete items saved in Account Details 󱛠Item names vary by selected item.  󱛠Erase mail add./Erase address/Erase birthday/Erase memorandums/Delete imageReset* Reset all Account Details except your subscribing phone numberYES >* Enter Phone Password if required.NoteQuote a content from Account Details to a message ( 󱛠P.3-5). BEGIN_E_OI.indb   13 2009/12/14   16:28:39
Phone Book44-14Voice DialMake a call by saying a voice dial name.NoteKeep microphone about 10 cm away from your mouth, and pronounce  󱛠a Voice Dial name clearly. If microphone is too distant, your voice may not be recognized.Avoid making sounds unrelated to Voice Dial names (clearing your  󱛠throat, clicking your tongue, heavy breathing, etc.).Say Voice Dial names in quiet places. 󱛠Avoid pressing or brushing keys, or covering microphone with fingers  󱛠when pronouncing a Voice Dial name.Adding Entries to Voice DialMain Menu  Phone Book  Settings  Voice Dial1 <New>  Select a Phone Book entryEntries with ★ are already saved in Voice Dial list.2  Enter a Voice Dial nameOnly katakana entry is available for Voice Dial names. 󱛠Edit Voice Dial Names ■In Step 1, highlight a Voice Dial name  > [Edit]  Edit name  YESDelete Voice Dial Entries ■In Step 1, (highlight a Voice Dial name  >)  [Menu]  Delete this or Delete all  YESSearching Entries by Voice Dial1  Press and hold    Say a Voice Dial nameSay the name within four seconds after voice recognition tone sounds.Once Voice Dial is recognized, result appears.2 [Detail]    to show phone number3 Voice CallsHighlight phone number   Video CallsHighlight phone number  [V. Call]TipSettings  ●Activate Voice Dial Automatically ●Activate Voice Dial via Earphone or Bluetooth® Device ( P.18-11)BEGIN_E_OI.indb   14 2009/12/14   16:28:40
55-1Digital TVBasics .................................................................... 5-2Initial Setup .......................................................... 5-4Channel Settings ........................................................................5-4Watching TV .......................................................... 5-5Indicators ................................................................................... 5-6Operations while Viewing TV.......................................................5-7Program List (Japanese) ..............................................................5-7Data Broadcast (Japanese) ..........................................................5-7Functions while Viewing TV.........................................................5-8TV Links (Japanese) ............................................ 5-11Saving TV Links ........................................................................5-11Opening TV Links ......................................................................5-11Functions Available in TV Link List .............................................5-11Recording/Playing Programs .............................. 5-12Recording Current Program.......................................................5-12Capturing Screenshots ..............................................................5-12Playing Recorded Programs.......................................................5-13Viewing Captured Screenshots ..................................................5-14Timer........................................................................................5-14BEGIN_E_OI.indb   1 2009/12/14   16:28:41
Digital TV5-25Basics941P supports One Seg terrestrial digital TV broadcasting.One SegOne Seg is a digital TV broadcasting service for mobile phones. For more information, visit The Association for Promotion of Digital Broadcasting Website:[PC] http://www.dpa.or.jp/[Handset] http://www.dpa.or.jp/1seg/k/(Japanese only)FeaturesWatch TV Programs (P.5-5)Watch One Seg Digital TV on handset.View Data Broadcast (P.5-7)Access a variety of program-related information.Record TV Programs  (P.5-12)Record program/capture still image while watching the program.Set Timer (P.5-14)Use Timer to view/record programs. You can easily set Timer by using Program List ( P.5-7).Mobile W-SpeedFrame rate of Digital TV images are automatically enhanced. Enjoy smooth image flow ( P.18-14).Mobile W-Speed is set to  󱛠ON by default.When this function is set to  󱛠ON, full effect of Image Quality may not be achieved.Depending on broadcasting condition, full effect of this function may  󱛠not be achieved.Disabled during ECO Mode ( 󱛠P.18-14) or AV output ( P.10-13).Disabled for playing back videos recorded with Mobile W-Speed set to  󱛠ON.PrecautionsDigital TV is available only in Japan. 󱛠Incoming calls/messages may affect TV image or audio quality while TV is  󱛠activated.Digital TV may be disabled if USIM Card is not installed or SoftBank  󱛠subscription is terminated.SoftBank is not liable for damages from accidental loss/alteration of  󱛠handset/microSD Card information. Data saved to handset (TV Links, Channel List, etc.) cannot be restored after repairs or handset replacement. Back up important information.BEGIN_E_OI.indb   2 2009/12/14   16:28:42
Digital TV5-35Signal Reception AreasTV signal reception may be poor in the following conditions:Too far from or close to broadcasting stations. 󱛠Mountain areas or near tall buildings. 󱛠In moving vehicles, underground, in tunnels, etc. 󱛠Near high-voltage wires, neon lights, wireless base stations, railroad  󱛠tracks or highways.Areas with numerous signal obstructions or areas where signal  󱛠reception is blocked.When Battery is Running OutWarning tone sounds and warning message appears if Digital TV is  󱛠activated with low battery.When battery runs low while programs are on or being recorded,  󱛠handset operates as follows:While Viewing ・ Warning tone sounds, and confirmation appears.While Recording ・ Response differs depending on Rec. When Low Battery  (P.18-14) setting.Continue Recording ...  Warning tone does not sound and   confirmation does not appear.Stop Recording ...Warning tone sounds and confirmation appears.Watching TV while charging may shorten battery life. 󱛠If recording ends due to low battery, recorded portion is automatically  󱛠saved.Incoming TransmissionsTV pauses for incoming calls. Resume TV after call ends.Incoming calls do not interfere with recording. 󱛠Tip ●Use Other Functions while Viewing TV ( P.5-8)BEGIN_E_OI.indb   3 2009/12/14   16:28:42
Digital TV5-45Initial SetupSet channels for your area.Up to ten Channel Lists can be saved. 󱛠Main Menu  TV  Channel Setting  Select Area1  Select a region  Select a prefecture 2 YESNoteIf manual setup fails, try automatic channel setup ( 󱛠Below).941P detects a change in reception area after moving to a different  󱛠area. Set Channel List for that area.Channel SettingsAutomatic Channel SetupMain Menu  TV  Channel Setting  Automatic1 YES2  After channel search, YES  Enter titleIf title is not entered, date (year/month/day/hour/minute) is  󱛠automatically saved as title.Using Channel ListFrom Main Menu  TV  Channel ListSet Channels ■Select a Channel List >Channel List is set, and available channels appear. 󱛠Select a channel to access the station. 󱛠Delete Channel List  ■Highlight a Channel List  > [Menu]  Delete  YESSelected Channel List cannot be deleted. 󱛠Delete Channels from Channel List ■Highlight a Channel List  > [Detail]  Highlight a channel   [Menu]  Delete  YESChannels in selected Channel List cannot be deleted. 󱛠Edit Title ■Highlight a Channel List  > [Menu]  Edit title  EditReassign a Remote Control Number (Keypad) to a  ■ChannelHighlight a Channel List  > [Detail]  [Menu]   Remote control #  Select a channel  Select a new remote control number  [Finish]  YESBEGIN_E_OI.indb   4 2009/12/14   16:28:45
Digital TV5-55Watching TVSet channels beforehand ( 󱛠P.5-4).Horizontal Open Position ( 󱛠P.1-7, P.1-8)1 2 Select a channelDirect ChannelAccess – (Channel 10)(Channel 11)(Channel 12)Previous/Next ChannelChannel Search Press and hold To stop:  󱛠[Cancel] / 3 To end TV,    End TVTo play TV sound in the background:  󱛠  Change to BGMViewerNoteAlternatively,  󱛠Main Menu  TV  Watch TVClosing handset while viewing TV shows still image in External Display  󱛠(not video image and data broadcasting). When TV Sound While Closed is ON, sound is heard but operations except volume adjustment are unavailable.Tip●Display Digital TV Images on a TV ( P.10-13) ●Use Bluetooth® Device for Wireless Playback ( P.10-10)TBDBEGIN_E_OI.indb   5 2009/12/14   16:28:53
5-6Digital TV5Indicators❶❷❸󱀔󱀕❺❻❼ ❽ ❾󱀓󱀖❹❶󱀕󱀔󱀗❾󱀓 Guide Display❷❼❽❺ ❻Item Description●❶Image –●❷Captions –●❸Data Broadcast ( P.5-7)●❹Data Broadcast Mode Data Broadcast Mode off Data Broadcast Mode on●❺Off timer ( P.5-10)●❻ECO Mode ( P.18-14)●❼Channel ( P.5-4)When multiple programs are available  󱛠in the same broadcasting station, "service number/total numbers" appears.●❽Signal Strength Level                              Strong←――→Weak   Out of range●❾Receiving Captions –●󱀓Volume –●󱀔Program Title –●󱀕Recorder Status Recording   Timer Set●󱀖Display/Caption Display: ON/OFF/LargeCaption: ON/OFF●󱀗Indicator/Caption  Indicators: ON/OFFCaption: Upper position/Lower position/OFFTBDTBDBEGIN_E_OI.indb   6 2009/12/14   16:28:56
Digital TV5-75Operations while Viewing TVVolume  1/Mute/Cancel Mute 1Program List [EPG]Program Info Press and hold To return to Viewer:  󱛠Program Title Alternatively, in Landscape View (Normal  󱛠Open Position), press  , (  in Horizontal Open Position)Display/Caption View 2While Program Title appears:   󱛠Each key press toggles display and caption views.Indicator/ Caption View 3While Program Title appears: Each key press toggles indicators (icons) on/ 󱛠off and caption view (in Landscape View).Display ViewEach key press toggles display direction  󱛠(Broadcast Mode off).Each key press toggles full/normal display  󱛠(Broadcast Mode on).Not available in Horizontal Open Position 󱛠Record Programs 1[Record] ( P.5-12)To stop:  󱛠[Stop]Capture Still Images 1Press and hold   ( P.5-12)Data Broadcast Mode On/Off 2[TV/data]1  Available when Data Broadcast Mode is off2  Available only in Portrait View3  Available only in Landscape ViewProgram List (Japanese)Check program schedules and set timer to view/record TV programs.Main Menu  TV  Program ListConfirmation appears when using Program List for first time. Follow  󱛠onscreen instructions.See Program List Help menu for usage information. 󱛠Data Broadcast (Japanese)Access a variety of program-related information such as still images and videos.Data Broadcast is not available in Landscape View. Press  󱛠 to switch to Portrait View.1  Activate TV (Data Broadcast Mode off)   [TV/data] appears. 󱛠 to select informationTo deactivate Data Broadcast Mode:  󱛠[TV/data]NoteViewing Data Broadcast information requires no fees: however,  󱛠accessing websites will incur connection fees.BEGIN_E_OI.indb   7 2009/12/14   16:29:01
Digital TV5-85Functions while Viewing TVSound Settings ■While TV is active,  >[Menu]  Settings  Sound  Sound Effect  Select an item (See below)Item Operation/DescriptionAuto Volume Automatically increase to optimum volumeON > or OFFRemaster Adjust sound quality to reproduce original soundON > or OFFListening Adjust to natural sound when using earphone or Bluetooth® deviceSelect an item >Surround・  : Reproduce natural and stereophonic soundNatur 1・   or Natur 2: Complement sound specific to earphone to reproduce natural soundOFF・  : Turn off Listening settingEqualizer Change sound quality when using earphone or Bluetooth® deviceSelect an item >Normal・  : Reproduce normal soundH. BASS1・  : Enhance low-pitched soundH. BASS2・  : Enhance low-pitched sound even moreVoice・  : Make voice clearTrain・  : Minimize sound leakageOther Functions ■While TV is active, follow the steps below. >Item Operation/DescriptionAccess Internet via Yahoo! KeitaiPress and hold  >To return to viewer: While Yahoo! Keitai is active, press  󱛠and hold Access Internet via PC Site Browser >(MULTI)  Open Menu  Yahoo! Keitai   PC Site BrowserFollow onscreen instructions 󱛠Make a Voice Call/Video Call >(MULTI)  Stand-by display  Enter a number   (For Video Call,  [V. Call])Interrupt TV during call. After call, TV resumes. 󱛠Recording will not be interrupted. 󱛠Use Messaging >(MULTI)  Stand-by display  BEGIN_E_OI.indb   8 2009/12/14   16:29:02
Digital TV5-95Functions Available while Viewing TV ■While TV is active,  >[Menu]  Select an item (See below)Item Operation/DescriptionProgram info View current program informationProgram listView Program ListDisp.Ch./operation 1Select an item >Channel info・  : View channel details. Select a channel to watch that StationChannel List・  : View Channel List ( P.5-4)Channel Setting・  : Set channels for your area  (P.5-4)Add to ch. list・  : Add current station to Channel List. Assign current station to lowest available number key.Tune service・  : Select a program when multiple programs are available from the same broadcasting companyItem Operation/DescriptionData Broadcasting 1Select an item >Back to data BC・ : End Data Broadcast site and return to Data Broadcast windowReload contents・ : Reload page (Data Broadcast link)Certificate・ : View owner, author, validity period and serial number of certificate used in SSL communicationImages・   2: Show/hide images on Data Broadcast sitesSound Effect・   2: Turn on/off sounds from Data Broadcast/sitesReset Settings・   2: Show confirmation on Data BroadcastTV link list 1Show TV Link detailsCompose  S! MailCreate S! Mail while listening to sound ( From Step 2 on P.13-4)Next PageBEGIN_E_OI.indb   9 2009/12/14   16:29:05
Digital TV5-105Item Operation/DescriptionSettings Select an item >Display/operation・    Switch display 1: Switch view (switch image size/image off)Display/operation・    Switch TV/data BC 1:  In Portrait View, toggle Data Broadcast Mode on/off (P.5-7)Display/operation・    Icons 2: Set Guide Display in Landscape ViewDisplay/operation・    AV output: View a Digital TV image on a TV set or other devices ( P.10-13)Video・    Brightness: Set Back Light brightnessVideo・    Mobile W-Speed 2: Enhance frame rate of TV images automaticallyVideo・    Image Quality 2: Select an image qualityVideo・    LCD AI: Activate image compensation according to Back LightSound・    Sound Effect 2 ( P.5-8)Sound・    Main/sub sound: Set main/sub soundSound・    Switch audio data: Available only when multiple audio data are supportedSound・    TV Sound W/ Closed 2: Set whether to keep speaker on when closing 941P while viewing TVECO Mode・   2: Set power saving mode ( P.18-14)Off timer・  : When set time passes, confirmation appears asking whether to end viewing/recording TVItem Operation/DescriptionKey guide View key operation guide while watching TV1  Available only in Portrait View2  Available from User Settings even while TV is not active ( P.18-14).BEGIN_E_OI.indb   10 2009/12/14   16:29:05
Digital TV5-115TV Links (Japanese)Saving TV LinksFollowing function is not available in Landscape View. 󱛠1  Switch Data Broadcast Mode on  Select a link2 YESFollow onscreen instructions to save link.Opening TV LinksMain Menu  TV  TV Link1  Select a TV LinkConfirmation appears when Internet access is required. Select  󱛠YES to proceed.If TV Link is expired, confirmation appears asking whether to delete  󱛠link.Functions Available in TV Link ListMain Menu  TV  TV Link1 [Menu]  Select an item (See below)Item Operation/DescriptionDisplay detail Show TV Link title, URL, summary, content type, expiration dateNo. of TVlink Show number of saved TV LinksDelete Select an item >Delete this・    YESDelete selected・    Check TV link(s) to delete  [Finish]  YESDelete all・    Enter Phone Password  YESBEGIN_E_OI.indb   11 2009/12/14   16:29:05
Digital TV5-125Recording/Playing ProgramsRecording Current ProgramSave programs as videos or still images. Recordings are saved to microSD Card.microSD Card:  󱛠P.9-16Save up to 2GB of data at a time. 󱛠Recording Time (total)*Approx. 640 minutesSavable Files 99 files* Average recordable time per 2GB of dataRecording is unavailable when signal strength drops to  󱛠.1  Activate TV (Data Broadcast Mode off)  [Record] appears, and recording starts.2 [Stop] to stop recordingProgram is saved to microSD Card.NoteIn the following cases, recording ends and recorded portion is  󱛠automatically saved:File size is over 2GB・ microSD Card memory is full・ Recorded files are not saved to handset. 󱛠Do not remove microSD Card while recording. 󱛠Recording continues even if signal strength level is  󱛠 ; however, images and audio are not saved.Data Broadcast information cannot be recorded. 󱛠Recording is disabled during AV output. 󱛠Capturing ScreenshotsCaptured screenshots are saved to handset.This feature is unavailable when signal strength is  󱛠 or Data Broadcast Mode is on.1  Activate TV (Data Broadcast Mode off)  press and hold NoteCaptions cannot be captured. 󱛠Capturing is disabled during AV output. 󱛠BEGIN_E_OI.indb   12 2009/12/14   16:29:06
Digital TV5-135Playing Recorded ProgramsMain Menu  Data Folder  TV  Video1  Select a filePlayback starts.2   to stop playbackNoteClosing handset while watching TV shows landscape view in External  󱛠Display.Example: Video FolderPlayback OperationsVolume /Mute/Cancel Mute [ / ]Fast Forward  (Press once: 10x; Press twice: 30x)Fast Rewind  (Press once: 10x; Press twice: 30x)Pause/Resume [ / ]Play Frame by FramePause playback  [Frame]Play back frame by frame. 󱛠Skip Rewind  1Press and hold  /Skip Forward 2Press and hold  /Toggle Playback Speed[ / / / (Summary View)]Summary View adjusts playback speed  󱛠according to audio.View Title In Landscape View, indicator/caption setting  󱛠display appears.Toggle CaptionDisplay title  In Landscape View, each key press toggles  󱛠indicators (icons) and captions on/off.Portrait/Landscape View 3 4Each key press switches view. 󱛠1  Unavailable if file is under 10 seconds long2  Unavailable if file is under 30 seconds long3  Close handset to return to Portrait View.4  Disabled in Horizontal Open PositionTBDBEGIN_E_OI.indb   13 2009/12/14   16:29:10
Digital TV5-145Viewing Captured ScreenshotsMain Menu  Data Folder  TV  Image1  Select an imageTimerSet up to 100 timer entries to watch or record programs. 󱛠Main Menu  TV1 Timer Watching or Timer Recording2 [New]  Select an item (See below)Item Operation/DescriptionStart date settingSet date and time to start and end viewing/recording a programSelect an item >Enter date・    Enter a date and timeChoose date・    Select a date  Enter date and timeEnd date setting 1Channel Select a channel >Edit title Enter a program name >Repeat Select a repetition  > For Select day, select a day (days)  [Finish]Alarm (Alarm notice) 2ON > or ON/Set time  For ON/Set time, select an alarm timeItem Operation/DescriptionAlarm tone 2Select an alarm type  > Select a folder  Select an alarmAlarms (Alarm on/off) 1ON > or OFFAlarms (Alarm volume) > to adjust volumeFor  󱛠Timer Recording, Escalating Tone cannot be set.Activate TV w/ alarm 2ON > or OFFWhen  󱛠ON is set, Digital TV activates from alarm notification window.Priority 1Set handset response when Timer Recording startsRecording > or OperationWhen  󱛠Recording is set, active function suspends/ends, and recording starts.When  󱛠Operation is set, confirmation appears. To suspend/end active function, select YES and   to start recording.1  Timer Recording only2 Timer Watching only3   [Finish]  For Timer Recording, select YES or  YES (confirm once)BEGIN_E_OI.indb   14 2009/12/14   16:29:10
Digital TV5-155NoteSelect timer entries to check details;  󱛠[Edit] to edit details.Timer Recording does not start if Internet and two other functions are  󱛠active simultaneously.Alarm does not sound for Timer Watching/Timer Recording in following  󱛠functions. For Timer Recording, complete followings (in parentheses) one minute before timer starts; otherwise, recording does not start.While handset is off (Turn on handset)・ While Privacy Key Lock is active (Cancel lock)・ While Personal Data Lock is active (Cancel/change lock)・ During data transfer (Complete transfer)・  During Infrared transmission, IC transmission or Bluetooth・  ® transmission (Complete transmission)During software update (Complete update)・ Other Timer OperationsMain Menu  TV1 Timer Watching or Timer Recording2 [Menu]  Select an item (See below)Item Operation/DescriptionNew Set a timer entry to watch/record a program ( P.5-14)Edit Edit entry details ( P.5-14)Sort Sort timer entriesSelect an order >Delete thisYES >Delete past Timer entries with start/end time set prior to current date/time are deletedYES >Delete selectedCheck timer entries to delete  > [Finish]  YESDelete all Enter Phone Password  > YESMemory Status*Show memory status* Timer Recording onlyChecking Timer Recording ResultsMain Menu  TV1 Recording Result  Select a resultDetails appear. 󱛠BEGIN_E_OI.indb   15 2009/12/14   16:29:11
5-16Digital TV5BEGIN_E_OI.indb   16 2009/12/14   16:29:11
66-1CameraBefore Using Camera ............................................ 6-2Image File Formats .....................................................................6-2Notes ......................................................................................... 6-2Inside & Outside Camera ............................................................6-3Camera Display Indicators ...........................................................6-4Pictures/Videos ..................................................... 6-6Capturing Still Images (Camera Mode) ........................................6-6Recording Videos (Video Camera Mode) ......................................6-7Functions Available while Shooting .............................................6-7Focus Functions (Outside Camera) ..................... 6-12Changing Focus Settings ...........................................................6-12Auto Focus Lock .......................................................................6-12Viewing Saved Images ....................................... 6-13BEGIN_E_OI.indb   1 2009/12/14   16:29:11
Camera6-26Before Using Camera941P features approximately 8.1 Mega Pixel CMOS  Auto-focus Camera capable of capturing still images and videos.Image File FormatsStill images/videos are saved to Data Folder.Image Type File Format Save LocationStill images JPEG (.jpg) Camera folder in Pictures folderVideos MPEG-4 (.3gp), ASF (.asf) Camera folder in Videos folderTo save to microSD Card (Storage setting:  󱛠P.6-11)NotesRemove dust/debris from lens cover with a soft cloth. 󱛠Handset movement may blur images especially in dark places; hold  󱛠handset firmly.Capturing/saving images immediately after handset has been left in a  󱛠hot place may affect image quality.Exposing lens to direct sunlight may affect image quality. 󱛠While Camera is active, Photo light illuminates/flashes. When Inside  󱛠Camera is used, Notification Light/Charging Indicator flashes. Illuminating/flashing cannot be turned off.Shutter ClickShutter click sounds at fixed volume even in Manner Mode.To change shutter click sound:  󱛠P.6-11BEGIN_E_OI.indb   2 2009/12/14   16:29:13
Camera6-36Inside & Outside CameraUse Inside or Outside Camera. Still images can also be captured with handset closed ( P.6-7). With Outside Camera, auto focus ( P.6-13) and image stabilizer  (P.6-11) are available.Change settings by using either function menus or key operations.CameraFlash/Photo lightNoteCamera is not available when battery is low. 󱛠Incoming calls, Alarm and low battery cancel Camera. Captured images/ 󱛠recorded videos are retained. Save data when Camera restarts.When left in Viewfinder for three minutes, Camera is canceled and  󱛠previous window returns.BEGIN_E_OI.indb   3 2009/12/14   16:29:14
6-4Camera6Camera Display IndicatorsImages shown below are for reference only. 󱛠 ■Picture Viewfinder  ■Video Viewfinder❶❺❻❾󱀓󱀔󱀕󱀖 󱀘❸❹󱀗󱀙󱀚󱀛❼❽❷󱀓󱀔󱀕󱀖 󱀘❾󱀗❻󱀙❼❽❺󱀚󱀛❸❹❷❶❽❾󱀕󱀗󱀘󱀙󱀚❷❸ ❺󱀛󱀜󱀝 󱀞󱀟󱀓❻󱀔❶❼󱀗󱀘󱀙󱀚󱀕❸❺❾❷❶❼󱀓󱀔❽󱀝󱀛󱀞󱀟󱀜❻TBDTBDTBDTBDBEGIN_E_OI.indb   4 2009/12/14   16:29:19
6-5Camera6Item Description Operation❶Photo mode ( P.6-10)  Intelligent Auto    Normal    Scene    My original set.For Scene/My original set., indicators may vary depending on setting. 󱛠Press and hold  [ ]  Select a mode ( For Scene/My original set., select an item)❷CHG Camera-mode Camera mode    Video Camera mode    /   /   Action mode (Auto/Auto bracket/Manual) (Cont. shooting set.:  P.6-8)[Video/Cont./Camera]Toggle Action mode ( 󱛠P.6-11)❸Storage setting  Phone    microSD Card❹No. of frames Show number of remaining frames —❺Img. stabilizer Correct camera shake ( P.6-11)❻Flash setting (Still image)  Auto    Forced ON    Always light ON    Forced OFFPhoto light setting (Action/Video) ON    OFF❼Key Guidance Show key operation guidance —❽Top indicator Indicate vertical direction —❾Focus Guide Adjust focus automatically —󱀓Zoom bar Indicate zoom level ( P.6-9) zoom in/ zoom out Long press: continuous zoom 󱛠󱀔Image size* Show image size ( P.6-9)  Select a size󱀕Image quality*  Normal    Fine    Super fine  Select a mode󱀖High sensitiv.*  ON    OFF  Select ON/OFF󱀗Brightness* Adjust brightness (Level -3 to +3)  Select a level󱀘White balance*  Auto    Fine    Cloudy    Light bulb    Fluorescent light  Select a mode󱀙Scene* Portrait  Sports  Food  Scenery  Night mode  Backlight  Character  Snow  Sunset  Pet  Select a scene󱀚Focus* ( P.6-13)  Face Detection    Auto    Close-up    Landscape  Select a mode󱀛Auto timer ( P.6-8)  Toggle ON/OFF󱀜Memory capacity bar Indicate memory status (appears in red when memory is full) —󱀝File size setting  Mail restrict'n(S)    Long time ( P.6-11)󱀞Movie type set Record video with/without audio ( P.6-11)󱀟Recordable time Indicate recordable time —* Alternatively,  [ ]   to highlight an item   to select a settingBEGIN_E_OI.indb   5 2009/12/14   16:29:40
Camera6-66Pictures/VideosConfirm battery strength ( 󱛠P.1-11) and memory ( P.6-11) before recording. When battery is low, video cannot be recorded.Captured images and videos are automatically saved to Data Folder. To  󱛠select save location each time, turn Auto save set to OFF ( P.6-11).NoteWhen using Inside Camera, mirror image appears on Viewfinder.   󱛠Captured images appear correctly.For activating Camera/capturing images by  󱛠, press firmly.Capturing Still Images (Camera Mode)1 Press   or press and hold   to activate Camera2 Frame subjectTo toggle Inside/Outside Camera:  󱛠3 [Record],   or   to capture the imageShutter click sounds at fixed volume. Image is automatically saved.When  󱛠Focus is set to Auto or  Face Detection, Outside Camera automatically focuses on subject before capturing image.Picture Viewfinder4   to exitReturn to Standby.Continuous ShootingCapture a succession of up to 20 still images automatically with a single press.1 In Picture Viewfinder,  [Video]  [Cont.] appears (Indicators vary by Action mode).To set Continuous Shooting:  󱛠P.6-112 Frame subject  [Record],   or Images are automatically saved.When  󱛠Focus is set to Auto, Outside Camera automatically focuses on subject before capturing image.To stop shooting halfway:  󱛠TBDBEGIN_E_OI.indb   6 2009/12/14   16:29:51
Camera6-76Recording Videos (Video Camera Mode)1 Press and hold   to  activate Video Camera2 Frame subjectTo toggle Inside/Outside Camera:  󱛠3 [Record],   or   to start recordingTone sounds.When  󱛠Focus is set to Auto, Outside Camera automatically focuses on subject before recording begins. During recording, auto focus functions regardless of Focus setting.4 [Stop],   or   to end recordingTone sounds. Video is automatically saved.Recording stops automatically at maximum recording time. 󱛠5  to exitReturn to Standby.NoteAlternatively, 󱛠   [Video] to activate Video CameraVideo ViewfinderFunctions Available while ShootingFrom Camera mode: Action mode:    [Video]  [Cont.]Video camera mode: Press and hold  ■Auto Timer >[Menu]  Auto timer  ON  Enter time (seconds)   [Record],   or   ( For video,  [Stop],   or  )Auto timer tone sounds. After set period of time, shutter is released and  󱛠recording starts.When Auto timer is active,  󱛠[Quit] or   to return to Viewfinder without canceling Auto timer.Auto timer is not available when  󱛠Cont. shooting set. is set to Manual. ■Zoom > (zoom in) or  (zoom out) to adjust zoom  [Record],   or Press and hold  󱛠 for continuous zoom.Zoom is available during video recording. 󱛠Zoom is disabled when  󱛠Image size is set as follows:Inside Camera:・  VGA, HVGA Wide or QVGA (individual mode)Zoom may change image quality. 󱛠TBDBEGIN_E_OI.indb   7 2009/12/14   16:29:53
Camera6-86Maximum zoom levels for individual image size are as follows.  󱛠Maximum zoom levels in Horizontal Open Position are indicated in (  ) if different from those in Normal Position.Camera modeSizeZoom level Max. level (approx.)Outside CameraCamera  (High sensitiv.: OFF) 8M 21 levels 2.6 times 6M Wide 21 levels 2.6 times 5M 21 levels 2.6 times 3M 21 levels 2.6 times 2M Wide 21 levels 2.6 times 2M 21 levels 2.6 times Stand-by 21 levels 2.6 times VGA 21 levels 2.6 times QVGA 31 levels 5.1 times QCIF 31 levels 8.5 times Sub-QCIF 31 levels 12.8 timesCamera (High sensitiv.: ON) 2M 21 levels 2.6 times Stand-by 21 levels 2.6 times VGA 21 levels 2.6 times  QVGA 31 levels 5.1 times  QCIF 31 levels 8.5 times  Sub-QCIF 31 levels 12.8 timesContinuous shooting VGA 21 levels 2.6 times  QVGA 31 levels 5.1 times  QCIF 31 levels 8.5 times  Sub-QCIF 31 levels 12.8 timesCamera modeSizeZoom level Max. level (approx.)Video camera (Img. stabilizer: Auto) VGA 21 levels 1.9 times HVGA Wide 21 levels 1.9 times QVGA 31 levels 2.9 (3.8) times  QCIF 31 levels 5.2 (6.4) times Sub-QCIF 31 levels 7.2 (9.6) timesVideo camera (Img. stabilizer: OFF) VGA 21 levels 2.6 times HVGA Wide 21 levels 2.6 times QVGA 31 levels 3.8 (5.1) times QCIF 31 levels 7.0 (8.5) times Sub-QCIF 31 levels 9.6 (12.8) timesInside CameraCamera/Continuous shooting VGA 1 level 1.0 time QVGA 1 level 1.0 time QCIF 6 levels 1.6 times Sub-QCIF 21 levels 2.1 timesVideo camera VGA 1 level 1.0 time HVGA Wide 1 level 1.0 time QVGA 1 level 1.0 time QCIF 6 levels 1.9 (1.6) times Sub-QCIF 21 levels 2.8 (2.1) timesBEGIN_E_OI.indb   8 2009/12/14   16:30:01
Camera6-96Use  ■Flash/Photo LightSelect a Flash/Photo Light setting for Outside Camera.In Picture Viewfinder,  >[Menu]  Flash setting  Select an item (See below)Item Operation/DescriptionAuto Flash goes off automatically in low-light situations.Forced ON Flash always goes off when capturing images.Always light ONPhoto Light illuminates.Forced OFF Flash/Photo Light is disabled.  >In Continuous Shooting/Video Viewfinder,  [Menu]  Photo light set.  ON or OFFFlash/Photo light is not available when battery is low. 󱛠When Camera is ended or changed to Inside Camera while a setting  󱛠other than Forced OFF is set, Flash setting is changed to Auto next time Camera activates or Outside Camera is used. When Forced OFF is set, setting remains.Even if  󱛠Forced OFF (Flash setting) or OFF (Photo light set.) is set, Photo light illuminates or flashes when Camera is active or during shooting.When Photo mode is set to  󱛠Intelligent Auto, Forced ON cannot be set.When using flash, maintain an appropriate distance from subject of 40  󱛠to 100 cm.When image is captured at close range, image may turn white as a result  󱛠of poor exposure.Set Photo Mode According to Scene ■ >[Menu]  Photo mode  Select an item (See below)Item Operation/DescriptionIntelligent AutoAutomatically switch Photo mode according to occasion (in Camera mode)Indicator is animated when mode changes (Example:  󱛠 Close-up).Mode does not change after Auto Focus Lock. Cancel  󱛠Auto Focus Lock.Normal Capture an image in normal modeScene Adjust brightness and color tone according to sceneSelect an item >My original set.(P.6-12)Functions Available in Viewfinder ■Change settings before initiating image capture. Some functions are  󱛠changeable with simple key operations ( P.6-5).Some operations are not available depending on Photo mode, image size  󱛠or Photo mode. >[Menu]  Select an item (See below)Item Operation/DescriptionInside camera/Outside cameraSwitch Inside/Outside CameraCHG camera-modeCamera mode >, Video camera mode,  Action mode or Bar code readerFolder jump Open storage folderPhoto mode (Above)Image size Select a size >File size settingSelect Mail restrict'n(S) for S! Mail attachments or  Long time for long-time recordingBEGIN_E_OI.indb   9 2009/12/14   16:30:02
Camera6-106Item Operation/DescriptionImage quality Select an item >In Video camera mode, this function is available only  󱛠when File size setting is set to Long time.Camera settingsSelect an item >Brightness・    ・ White balance: Adjust color toneColor mode set・  : Select a color modeFocus・  :  P.6-13Img. stabilizer・  : Minimize camera shake automaticallyShoot with frame・  : Add frame to image・ Shutter sound: Select a shutter click soundFlicker correction・  : Minimize flicker while shooting near fluorescent lightStorage settingSelect an item >Store in・    Phone or microSD・ Auto save set  ON or OFFHigh sensitiv.ON > or OFFFlash setting/Photo light set.Set whether to use Flash/Photo light ( P.6-10)Auto timer (P.6-8) Item Operation/DescriptionCont. shooting set.Select an item >Action mode・  : Manual captures one picture at a time. Auto bracket captures nine different still images automatically.Shot interval・  : Select an interval when  Action mode is set to Auto.Shot number・  : Set number of images to be captured when Action mode is set to Auto or Manual. Details are as follows: VGA (480×640): 4 QVGA (240×320): 5 to 10 QCIF (144×176): 5 to 20 Sub-QCIF (96×128): 5 to 20Movie type setNormal > or VideoDisplay size Select Viewfinder sizeActual size > or Fit in displayAttach S!Mail modeYES > or NOImage size, File size setting and Image quality are set  󱛠as follows (respectively): QCIF, Mail restrict'n(S), NormalIcon Show/hide display indicatorsON > or OFFMemory StatusView memory informationBEGIN_E_OI.indb   10 2009/12/14   16:30:02
Camera6-116Save as  ■Original SettingPress and hold  >  Photo mode MyOriginal  Follow the steps (See below)Item Operation/DescriptionSave setting Highlight a setting  > [Save] ( YES)  Edit title Open setting Select a setting >Edit title Highlight a setting  > [Edit]  Edit titleView detail Highlight a setting  > [Detail]Delete settingHighlight a setting  > [Delete]  YESFunctions Available after Shooting ■Available only when  󱛠Auto save set ( P.6-11) is OFFSome operations are not available depending on camera mode or image  󱛠size. >[Menu]  Select an item (See below)Item Operation/DescriptionPlay Play back recorded videoSave Save still image/videoStore all/animat'nSave > or Mirror save  <New>Mirror save Save mirror imageAttach to  S! MailSend file via S! MailCreate a message ( >From Step 2 on P.13-4)Set display Set as wallpaper, Phone Book image, etc.Select an item >Change frame*Select a frame  > [Set]  [Save]Store inPhone > or microSDMirror display/Normal displaySwitch Mirror/Normal displayDisplay size Set image size in ViewfinderActual size > or Fit in displayIcon Show/hide display indicatorsON > or OFFCancel Discard image to return to Viewfinder* Available only when shooting with frameBEGIN_E_OI.indb   11 2009/12/14   16:30:03
Camera6-126Focus Functions (Outside Camera)Changing Focus Settings<Default> Camera mode: Face Detection     Video camera/Action mode: AutoSelect a focus setting according to occasion.  Focus on Individual scenes automatically.Face Detection (Camera mode only): For portraits 󱛠Auto: Auto detection 󱛠Close-up: For nearby objects 󱛠Landscape: For distant landscapes 󱛠1 In Picture/Video Viewfinder, 2   to select a setting  Face DetectionDetect up to five faces within 2.5 meters. 󱛠Show yellow Focus Guide when a face is detected. 󱛠Automatically focus on one face when more than one is detected  󱛠(Focus guide turns yellow once focus is on the face.).Faces may not be detected in following conditions: 󱛠Face is tilted.・ A part of face is covered by glasses, hat, mask or shadow.・ Face is too small, big or dark for screen.・ Face is at edge of screen.・ Shoot with Auto focus if detection fails.  󱛠Auto Focus LockBring focus on subject at center of display automatically. Lock focus on subject, and recompose your picture.1 In Picture/Video Viewfinder,  ,   or   halfway① When in focus, handset sounds.② Focus Guide turns green, and focus is locked.When out of focus, Focus Guide turns red. 󱛠To cancel focus locked by  󱛠 or  : To cancel focus locked by  󱛠: Release finger from 2 Determine composition3 Capture image in selected camera mode (Camera mode: P.6-6/Action mode:  P.6-7/Video camera mode:  P.6-8)In Step 1, press  󱛠 halfway to lock focus, then press   firmly to shoot.BEGIN_E_OI.indb   12 2009/12/14   16:30:05
Camera6-136Viewing Saved ImagesMain Menu  Camera1 Open PicturesPictures Open VideosVideos2  Select a folder3  Select a fileOpen Pictures Saved on microSD Card ■After selecting  >Pictures in Step 1,  [microSD]  Select a folderOpen Videos Saved on microSD Card ■After selecting  >Videos in Step 1,  [microSD]  Select a folderCheck Still Images in Picture Viewfinder ■In Picture Viewfinder,  >[Folder]To return to Picture Viewfinder:  󱛠Tip ●Editing Still Images ( P.9-12)Example: PicturesTBDBEGIN_E_OI.indb   13 2009/12/14   16:30:06
6-14Camera6BEGIN_E_OI.indb   14 2009/12/14   16:30:06
77-1EntertainmentMobile Widget (Japanese) .................................... 7-2Pasting Widgets to Standby ........................................................7-2Using Widgets ............................................................................7-2Downloading Widgets ................................................................7-3Arranging Widgets in Standby .....................................................7-3S! Quick News (Japanese) .................................... 7-4Registering S! Quick News Items ................................................7-4Opening New Information ..........................................................7-4S! Information Channel/Weather (Japanese) ........ 7-6Registering/Canceling ................................................................. 7-6Using S! Information Channel .....................................................7-6Using Weather Indicator .............................................................7-7Option Menu Items .....................................................................7-8E-Books (Japanese) ............................................... 7-8BEGIN_E_OI.indb   1 2009/12/14   16:30:06
Entertainment7-27Mobile Widget (Japanese)Paste widgets to Standby to access information or tools from Standby.Network WidgetSome widgets may periodically connect to network, incurring packet transmission fees.During transmission, other functions (e.g. Video Calls) may be disabled. 󱛠View Mobile Widget Overview ■Main Menu >  Entertainment  Mobile Widget  InformationShow/Hide Widget ■Main Menu >  Entertainment  Mobile Widget  InformationIn Standby,  >Pasting Widgets to StandbyPaste up to five widgets per sheet. Select from four sheets and organize sheets by theme.1 Widget List appears.2  Select a widget  [Menu]   Paste on Stand-by  Select a sheet3   to move to target location  Toggle Sheets ■In Standby,  >  [Back] or  [Forward]NoteAlternatively,  󱛠Main Menu  Entertainment  Mobile Widget   Widget Contents or Main Menu  Data Folder  Widget to select widgetsWhen saving widgets from microSD to Standby, do not remove microSD  󱛠Card.Using WidgetsSelecting Widgets in Standby1 In Standby, Pointer ( ) appears.To disable pointer:  󱛠 or 2   to move pointer  Select a widgetFollow onscreen instructions.TBDBEGIN_E_OI.indb   2 2009/12/14   16:30:14
Entertainment7-37Selecting Widgets from Widget List1 Widget List appears.2  Select a widgetMove Widgets in List ■ >  Highlight a widget  [Move]   to determine a target location  [OK]TipSettings  ●Mobile Widget ( P.18-15) Downloading WidgetsMain Menu  Entertainment  Mobile Widget   Widget Contents1 Download Widget  YES941P connects to the Network, and download site appears.Follow onscreen instructions.Widget ListInstalling WidgetsSome widgets may require you install them manually; follow steps below:In download completion window,  >[Menu]  InstallOnce installation is completed, widgets appear in Widget List. Widget  󱛠folder in Data Folder includes widgets that are not yet installed.NoteAlternatively,  󱛠Main Menu  Data Folder  Widget   Download Widget  YES to downloadArranging Widgets in Standby1 In Standby,      to move pointer  Highlight a widget  [Operate]2  Select an item (See below)Item Operation/DescriptionMove  > to move to a target location  Delete frm StandbyYES >Forward Move overlapping widget to foregroundRear Move overlapping widget to backgroundReload Update widgetTBDBEGIN_E_OI.indb   3 2009/12/14   16:30:19

Navigation menu