Panasonic Mobile Communications 210035A UMTS/ GSM Cellular Mobile with Bluetooth®, WLAN and RFID User Manual User MAnual Part 2 of 3

Panasonic Mobile Communications Development of Europe Ltd UMTS/ GSM Cellular Mobile with Bluetooth®, WLAN and RFID User MAnual Part 2 of 3

User MAnual Part 2 of 3

6-1InfraredBefore Using InfraredTransfer Phone Book/Calendar events, messages, bookmarksand Data Folder files wirelessly between handset and compatible devices, including PCs and other mobiles. ⿟001P infrared function is based on IrMC1.1, however, some IrMC1.1-based device transmissions may not be transmitted/received within specification. ⿟Debris may inhibit infrared transfers; clean infrared ports with a soft cloth beforehand. ⿟Direct sunlight/fluorescent light may inhibit transfers. ⿟Align infrared ports within 20 cm of one another and make sure no objects are placed between them. Do not move the devices until transfer is complete.Infrared PortWithin 20 cmTransferable FilesFile One file All filesPhone Book (Account Details) Available Up to 1000Calendar events1Available Up to 1000Tasks Available Up to 100Received message Available Up to 3000Sent message Available Up to 1000Drafts Available Up to 10Notepad Available Up to 20Ring Songs&Tones Available N/AStill image2 3Available N/AVideo3Available N/ABookmark (Yahoo! Keitai, PC Site Browser) Available Up to 100 eachWidget3Available N/A1 Saved Holidays/Memorial days and Handwriting Diary not transferable2 Including Flash® files3 Multiple files transferableNote ⿟Following files cannot transfer:・ Files prohibited for transfers from 001P・ Phone Book entries and SMS on USIM Card ⿟If memory becomes full, remaining entries are truncated Connectivity
6-2ConnectivitySendingOne/Multiple File Transfer1 Highlight a file, and follow the steps belowFiles to Send Operation/DescriptionPhone Book ＞S[Menu] 7 Send Ir data 7 Send phonebookAccount Details ＞F[Ir]Messages ＞S[Menu] 7 Send Ir data 7 Send ThisBookmarks ＞S[Menu] 7 Send to ExtrnlDvcs 7 Send Ir data 7 Send ThisStill Images/ Videos/Widgets ＞S[Menu] 7 Send Ir data ⿟To send multiple files: S[Menu] 7 Multiple-choice 7 Check files to send 7 S[Menu] 7 Send Ir data Other Files ＞S[Menu] 7 Send Ir data2 YESAll File TransfersPrecaution ⿟Receiving all files overwrites all saved files including secret/protected files. ⿟Sending all Phone Book entries transfers Account Details as well. User-saved Account Details is overwritten on receiving handset (handset number remains). Session NumberSession number (4 digits) is required for all file transfers via Infrared and IC transmission. Sender and recipient must enter same Session number to complete transfers.1 Highlight a file 7 S[Menu] 7 follow the steps belowFiles to Send Operation/DescriptionPhone BookSend Ir data 7 Send all phonebookMessagesSend Ir data 7 Send AllBookmarksSend to ExtrnlDvcs 7 Send Ir data 7 Send AllOther FilesSend all Ir data2 Enter Phone Password 7 Enter Session number 7 YESReceivingMain Menu 4 Tools 4 Receive via Infrared1 One/Multiple File TransferReceive 7 When a file is received, YESSend files from sender side within 30 seconds. All File TransfersReceive All 7 Enter Phone Password 7 Enter same Session number as sender's 7 YES 7 YESSaved files are deleted, and transfer starts.
6-3ConnectivityBluetooth®Notes ⿟ Bluetooth® connection is not guaranteed with all Bluetooth® devices. ⿟ Establish connections with certified Bluetooth® devices that meet the specification standards developed by Bluetooth® SIG. ⿟ Due to the unique characteristics/specifications of a certified Bluetooth® device, connections or transfers may fail; procedures, displayed results or operations may vary from those described in the manual. ⿟ When data transfer is interrupted, it may take some time for process to complete. ⿟ Noise may interfere with wireless or handsfree conversations depending on the status of connected devices or signal conditions. ⿟ For details about headset/handsfree devices, see the device manuals. ⿟Bluetooth® and Wi-Fi are not simultaneously available.Radio Wave Interference with Wi-Fi DevicesBluetooth® and Wi-Fi devices (IEEE802.11b/g) share the same frequency band (2.4 GHz). Use of both devices in close proximity may cause interference, affecting transmission speed, clarity or connection quality. If interference occurs: ⿟Maintain at least 10 m between Bluetooth® and Wi-Fi devices. ⿟Turn off Wi-Fi device when using Bluetooth® device within a 10 m radius.Searching & Pairing DevicesMain Menu 4 Tools 4 Bluetooth 4 Search&Paired Device1 YES*Device search starts and names of found devices appear. ⿟To search again: A[Search]* If there are already paired devices in list, select a device 7 Select a function2 Select a device 7 YES 7 Enter Phone Password3 Select text entry field 7 Enter Bluetooth® Passkey 4 Select a Bluetooth® function Handset connects to Bluetooth® device. When complete, flashes in blue. After no Bluetooth® connection is made for a certain time, appears in black and Power saver mode starts. ⿟When Bluetooth® device can connect to multiple services, confirmation appears asking whether to connect to another service. ⿟While connected, (Blue) appears. While in Standby, (Gray) appears. ⿟When Dial-up is selected, handset stands by for connection requests from other Bluetooth® devices. ⿟Dial-up can be selected regardless of profile types.Bluetooth® PasskeyBluetooth® Passkey (1 to 16 digits) is required to connect Bluetooth® devices; sender and recipient must input the same code to complete file transfers. ⿟Bluetooth® Passkey is not necessary for paired devices.
6-4Connectivity ■Search&Paired Device List❶ Device TypeIndicators appear for different types of devices.❷ Device NameDevice names appear. When no names are found, Bluetooth® addresses appear.❸ Connection Status: Connected : Not connected : Not found : Not paired❹ ProtectionIndicator appears when registered contents are protected.❺ Profile StatusIndicators appear to show profile status.IconLetter ColorBackground ColorFrame ColorStatusBlue Gray —Not connected (Not paired)Blue Gray Blue Not connected (Paired)White Green —ConnectedGreen White Green Standby for connectionWhite Light green —Preferred deviceGray Gray —Not supportedSearch&Paired Device❷❺❸❹❶Suspending Bluetooth® FunctionsSuspend all Bluetooth® functions connected or on standby for connection, and disable Bluetooth®.Main Menu 4 Tools 4 Bluetooth1 Bluetooth OFF 7 YES ⿟To return to standby for previously connected function: Bluetooth ON
6-5ConnectivityPlacing Bluetooth® Devices on Standby for ConnectionMain Menu 4 Tools 4 Bluetooth 4 Accept Registered1 Check functions to be on standby for connection 7 A[Finish] ⿟To uncheck, select functions to remove check marks.Sending/Receiving Phone BookSending1 Open Phone Book 7 S[Menu] 7 Send to Bluetooth2 One File TransferSend phonebook 7 Select a recipient device All File TransferSend all phonebook 7 Select a recipient device 7 Enter Phone Password3 YESReceivingMain Menu 4 Tools 4 Bluetooth 4 Receive via Bluetooth1 One File TransferReceive 7 YES All File TransferReceive All 7 Enter Phone Password 7 YES 7 YES
6-6ConnectivityWi-Fi (Wireless LAN)Use wireless LAN (Wi-Fi) for Internet connection via home/public Wi-Fi networks enabling high-speed internet access. ⿟001P Wi-Fi function supports IEEE802.11b/g. ⿟Subscription to Keitai Wi-Fi is required to access Internet over Wi-Fi.Direct AccessUse Direct Browser to view PC sites via Wi-Fi connection.Before Using Wi-FiNotes ⿟Wi-Fi connection may automatically switch to 3G depending on signal condition. ⿟Bluetooth® and Wi-Fi are not simultaneously available. ⿟Wi-Fi is not available while abroad.Radio Wave Interference with Bluetooth® DevicesBluetooth® and Wi-Fi devices (IEEE802.11b/g) share the same frequency band (2.4 GHz). Radio wave interference occurs if Bluetooth® and Wi-Fi devices are used in close proximity, causing low transmission speed, noise or poor connection. If interference occurs, take the following measures: ⿟Keep 10 m or more between Bluetooth® and Wi-Fi devices. ⿟Turn off Bluetooth® device when using Wi-Fi device within a radius of less than 10 m.Registering/Connecting to Access PointsFollowing methods are available for registering/connecting to access points.Search/Setting Search access points for registration/connection.Manual Setting Manually register/connect to access points.AOSSUse AOSSTM (AirStationTM One-Touch Secure System) for registration/connection. For AOSSTM-compatible access points, press AOSS button on access point device for automatic setup.BB mobilepointRegister to BB mobilepoint and set as access point. ⿟The BB mobilepoint profile is saved to handset by default. For details on BB mobilepoint, visit http://tm.softbank.jp/english/consumer/wlan/index.html ⿟Register up to 10 access points. ⿟User ID and password is required for connecting to pre-registered access points (Public Wi-Fi Setting: ZP.11-14). ⿟For setting/operating access point devices, refer to device manual. ⿟Wi-Fi connection is not available when access point channel is set to 12-14 ch and stealth mode.
6-7ConnectivityAccess Point SearchMain Menu 4 Tools 4 Wi-Fi 4 Profile Lists/Settings1 S[Menu] 7 New Profile 7 Search&SettingSelect YES when prompted to turn Wi-Fi ON. ⿟To search again: A[Search]2 Select an access point 7 *z[Store] 7 YES 7 *z[CNCT] 7 YES ■Access Point List❶..Access Point Name Detected SSID (ESSID) appears. Access point name appears for a registered access point.❷..Registered Networks : Registered (not connected) : Registered (connected)❸..Signal Strength Signal status appears.❹..Security Status Security status appears.❶❷❸❹Wi-Fi Status Indicators Wi-Fi ON (out of range) / Keitai Wi-Fi/Direct Access Available (In-Range/Transmitting) / Direct Access Available (In-Range/Transmitting) ⿟Number of blue arches indicates signal strength.Access Point List
6-8ConnectivityManual Registration/ConnectionMain Menu 4 Tools 4 Wi-Fi 4 Profile Lists/Settings1 S[Menu] 7 New Profile 7 Manual Setting2 Highlight an item (See below) 7 *z[Edit]Item Operation/DescriptionProfile Name ＞Enter an access point nameSSID ＞Enter the same SSID (ESSID) as access pointIP Setting Set IP address and DNS server ＞Highlight IP Address Setting or DNS Server Setting 7 *z[Edit] 7 Automatically or Manually (7 For Manually, edit respective items)Security Setting Set security/encryption method according to access point ＞Select a security type・ WEP 7 Enter WEP key 7 Enter encryption key・ WPA/WPA2-PSK 7 Enter encryption key ⿟To cancel security setting: NonYahoo! Keitai SettingSelect whether to use Keitai Wi-Fi ＞Accept or Not Accept ⿟When using Direct Browser only, select Not Accept.Public W-Fi SettingSet public wireless LAN on/off ＞ON or OFF (7 For ON, select ID or Password 7 *z[Edit] 7 Enter ID or password) ⿟Connection with all public wireless LAN services is not guaranteed.Proxy Setting Select whether to use HTTP proxy for Direct Access ＞YES or NO (7 For YES, highlight an item 7 *z[Edit] 7 Edit)3 A[Store] 7 YES 7 A[CNCT] 7 YESRegistration/Connection Using AOSSTMMain Menu 4 Tools 4 Wi-Fi 4 Profile Lists/Settings1 1[AOSS] ⿟Select YES to register/connect to an access point after disconnecting from registered access point.2 Press AOSS button at access pointPress within 120 seconds.3 A[Store] 7 YES 7 A[CNCT] 7 YESEnabling/Disabling Wi-Fi1 Press and hold wWi-Fi status indicator appears (ZP.XX-XX).
6-9ConnectivityFunctions Available for Wi-Fi ■Functions Available in Profile List/Setting Window ＞Main Menu 4 Tools 4 Wi-Fi 4 Profile Lists/Settings 4 S[Menu] 4 Select an item (See below)Item Operation/DescriptionConnect Connect to a registered access point ＞YESChange Priority Change priority for registered access points ＞Select an access point 7 ?z to move to target 7 *z 7 A[Finish]New Profile ＞Select an item・ AOSS (ZFrom Step 2 (Left))・ Search&Setting (ZFrom Step 2 on P.11-13)・ Manual Setting (ZFrom Step 2 on P.11-14)New BB mobilepointEnter user ID/password to register BB mobilepoint ＞Highlight an item 7 *z[Edit] 7 Enter user ID/password 7 A[Set]Edit ＞Edit itemsCopy Copy registered access pointDelete ＞Select an item・ Delete this 7 YES・ Delete selected 7 Check access points 7 A[Finish] 7 YES・ Delete all 7 Enter Phone Password ■View Connection Status ＞Main Menu 4 Tools 4 Wi-Fi 4 Connection Status ⿟To update status: A[Update]External DevicesSoftBank Utility Software (Japanese)Phone Book, Calendar, Tasks, messages, Bookmarks, Notepads and Data Folder can be transferred to a PC, edited or managed by using SoftBank Utility Software. ⿟USB cable (not included) is necessary for using SoftBank Utility Software. ⿟Set USB Mode to Communication Mode. ⿟For details on and downloading SoftBank Utility Software, visit http://www.softbank.jp/mb/r/sbu/ (Japanese)
6-10ConnectivityUSB (Japanese)Connect handset to a PC via USB cable (not included) specified by SoftBank for data transfer or data communication. ⿟Transfer data using SoftBank Utility Software.Setting USB Mode<Default> Communication ModeMain Menu 4 Settings 4 Connectivity 4 USB Mode1 Select an item (See below)Item Operation/DescriptionCommunication ModePacket transmission, 64K data transmission, data transfer and calls with USB handsfree compatible devices are available microSD Mode Read/write data on microSD CardMTP Mode Transfer/delete music data via Windows Media® Player on PCData Communication via USB CableUse handset as a modem for Internet access by connecting handset with a PC. ⿟Download utility software from URL below and install on PC. http://panasonic.jp/mobile/support/download/001p/index.html1 Install "USBドライバ (USB Driver)" and "Modem Wizard" from Utility Software (001P) to a PC2 Set handset to Communication Mode, and connect handset to PC via USB cable ⿟Power up handset before connecting to PC via USB cable.3 Start up "Modem Wizard," and operate communication setup ⿟"Modem Wizard" enables you to set up APN and dial-up easily. For setup/starting procedures, see "Modem Wizard" Help.Note ⿟Connecting handset to a PC or PDA for Internet access may incur high packet transmission fees.
6-11ConnectivityConnecting Handset to TVView the following on a TV set or other devices: Video Call images, Digital TV images, still images/videos saved on 001P. ⿟To use Video Output Cable (not included), Stereo Earphone Conversion Cable (not included) is required.1 Open External Port Cover2 Connect Video Output Cable to handset using Stereo Earphone Conversion Cable3 Connect Video Output Cable to video/audio input terminal on TV set4 Open an image file on handsetExternal PortYellowWhiteRedVideo Output CableVideo ◎Audio L ◎Audio R ◎
7-1Before Using Camera001P features approximately 13.2 Mega Pixel CMOS Auto-focus Camera capable of capturing still images and videos.Notes ⿟Remove dust/debris from lens cover with a soft cloth. ⿟Handset movement may blur images especially in dark places; hold handset firmly. ⿟Capturing/saving images immediately after handset has been left in a hot place may affect image quality. ⿟Exposing lens to direct sunlight may affect image quality. ⿟Photo Light illuminates or flashes while Camera is active. Photo light cannot be turned off. ⿟Shutter click sounds at fixed volume even in Manner Mode.Note ⿟Camera is not available when battery is low. ⿟Incoming calls, Alarm and low battery cancel Camera. Captured images/recorded videos are retained. Save data when Camera restarts. ⿟When left in Viewfinder for three minutes, Camera is canceled.File Formats & Save LocationStill images/videos are saved to Data Folder.Image Type File Format Save LocationStill images JPEG (.jpg) Data Folder (Pictures)Videos MPEG-4 (.3gp), ASF (.asf) Data Folder (Videos) ■Change Save Location ＞(Storage setting 7) Store in 7 Phone or microSDNote ⿟When recording time (File size setting: ZP.XX-XX) is set to Long time, videos are saved to microSD Card.Camera Modes & PositionsCamera Mode Still Image VideoDigicam mode Available AvailablePhoto mode Available N/AVideo Camera mode N/A AvailableCamera & Imaging
Camera & Imaging7-2Camera Display Indicators ⿟Images shown below are for reference only. ■Video Camera Mode󱀚❻ 󱀝 󱀖❽ 󱀘❺❸❹❷❶❾󱀛󱀜󱀓󱀔󱀕❼ 󱀗 ■Photo Mode ■Digicam Mode❶ 󱀘❺󱀚󱀞󱀞❸ ❹ 󱀓 ❷❽󱀖󱀔 ❾❼󱀞󱀙󱀜󱀗󱀙󱀚❹ 󱀔󱀓 ❷ ❾󱀗❽ 󱀘❼󱀟 󱀠 󱀡󱀢󱀜❺❸❶󱀞󱀞
Camera & Imaging7-3 ⿟Most icons and operation descriptions are based on Digicam mode. Actual screenshots and operations may differ from actual icons/operations.❶Photo mode iA (Intelligent Auto) Normal Scene MyOriginal(For Scene/MyOriginal, indicators may vary depending on setting.)◦❷Scene Portrait Sports Food Scenery Night mode Backlight Character Snow Sunset Pet❸Image sizeShow image size❹Image QLTY Normal Fine Super fine❺Photo light ON OFF❻ISO setting - 200 auto to 12800 auto❼Auto timerDigicam mode: 10 seconds 2 secondsPhoto mode/Video Camera mode: ❽Store in Phone microSD❾Focus FaceDetect Auto Close-up Landscape AF tracking󱀓BrightnessAdjust brightness (Level -3 to +3)󱀔White BAL Auto Fine Cloudy Bulb Light󱀕Color mode Normal Sepia Monochrome Vivid Natural Whitening Suntan󱀖No. of framesShow number of remaining frames󱀗Camera-mode Digicam mode/Photo mode Video camera mode Con.set. (Action mode in Digicam mode) / / Action mode in Photo mode (Auto/Auto bracket/Manual)󱀘Img. stabilizerCorrect camera shake󱀙Top indicatorIndicate vertical direction󱀚Focus Guide Auto focus guide AF tracking guide󱀛AutoShutter/ / Love shutter (Friends/Lovers/Lovers+Smile) Group shutter (One to Five) Smile shutter󱀜Zoom barIndicate zoom level󱀝TouchAF/AE Valid Invalid 󱀞Key GuidanceShow key operation guidance󱀟Memory capacity barIndicate memory status (appears in red when memory is full)󱀠File size setting Mail restrict'n(S) Mail restrict'n(L) Long time󱀡Movie type setRecord video without audio󱀢Recordable timeIndicate recordable timeKey Guidance ⿟Press A[Guide] in Digicam mode to view Key operation guidance (Normal Position). ⿟For Photo mode/Video Camera mode, follow the steps below to change settings:・ Press keys indicated by 󱀞.(7 ?z to select an item)・ A[] 7 <z to select a setting 7 ?z to select an item
7-4Camera & ImagingCapturing Still Images ■Functions Available in ViewfinderItem Description❶Activate Picture Album Activate Picture Album to view captured images ⿟Use as a slideshow (ZP.XX-XX) ⿟Tap to return to Viewfinder❷Menu View function menu❸Zoom Adjust zoom level❹Cancel Camera Cancel Camera❺Show Indicator Show/hide indicatorsPicture Viewfinder (Digicam Mode)❶❸❺❹❷1 8 or F2 Frame subject 7 8 or *zShutter click sounds at fixed volume, then captured image appears for two seconds.Image is automatically saved.3 L to exitContinuous ShootingCapture a succession of six or eight still images. Number of captured images varies by image size.1 In Viewfinder, S[Menu] 7 Con. set. 7 Continuous2 Frame subject 7 8 or *zContinuous shooting starts.Postview window appears.3 Save OneHighlight a image 7 *z[Save] ⿟To view full-size image: Highlight an image 7 F[Scale up] (7 <z to toggle full-size images) 7 To save the image, *z[Save] Save AllA[STO all] ⿟To return to Viewfinder without saving images: K
7-5Camera & ImagingRecording VideosIn Digicam Mode1 8 or F2 Frame subject 7 (TBD)3 (TBD) to exitVideo is automatically saved.In Video Camera ModeMain Menu 4 Camera1 Video Camera2 Frame subject 7 *z[Record], P or 8 to start recording3 *z[Stop], P or 8 to end recordingVideo is automatically saved.4 L to exitVideo ViewfinderOther Camera FunctionsAuto Focus LockBring focus on subject at center of display automatically. Lock focus on subject, and recompose your picture.1 In Viewfinder, 8 halfway or CzWhen in focus, handset sounds. Focus Guide turns green, and focus is locked. ⿟When out of focus, Focus Guide turns red. ⿟To cancel focus locked by Cz or G: K ⿟To cancel focus locked by 8: Release finger from 82 Determine composition3 Capture image in selected camera mode ⿟In Step 1, press 8 halfway to lock focus, then press 8 firmly to shoot.
7-6Camera & ImagingAF TrackingPosition AF tracking guide on subject. AF tracking guide appears and tracks moving subject while adjusting focus and exposure for subject.Note ⿟When Camera is unable to track subject (e.g. when subject is out of Viewfinder), AF tracking is canceled. ⿟Depending on situation, AF tracking may track unintended subject. ⿟AF tracking is not available when Auto shutter is in use or certain image size is set.1 Tap subject in ViewfinerWhen subject is recognized, AF tracking guide turns yellow and begins tracking subject. ⿟To cancel: CLR2 8 or F to capture the imageAuto Timer1 In Viewfinder, S[Menu] 7 Auto timer 7 10 seconds or 2 seconds ⿟In Photo/Video Camera/Action modes: S[Menu] 7 Auto timer 7 ON 7 Enter time (seconds)2 8 or *zAuto timer tone sounds. After set period of time, shutter is released and recording starts. ⿟While Auto timer is active, press A[Quit] or K to return to Viewfinder without canceling Auto timer.Note ⿟Auto timer is not available when Action mode is set to Manual. ⿟Auto Timer is set to OFF after capturing.
7-7Camera & ImagingAuto Shutter (Digicam Mode Only)Shutter automatically releases when camera detects certain conditions. Select an Auto Shutter type to specify condition (When Photo mode is set to Intelligent Auto or Focus is set to FaceDetect).1 In Viewfinder, S[Menu] 7 AutoShutter 7 Select an item (See below)Item Operation/DescriptionOFF Cancel Auto shutter settingLove shutter Shutter releases when two faces move close together ＞Friends, Lovers or Lovers+Smile ⿟When Lovers is set, distance between two faces is closer than Friends.Group shutter Camera detects up to five faces. When more people are in frame, Auto timer activates and shutter releases in three seconds ＞Select number of peopleSmile shutter Shutter releases when Camera detects a smiling face. If multiple faces are detected, shutter releases when camera detects a smile in yellow focus guide

Navigation menu