Panasonic Mobile Communications 210035A UMTS/ GSM Cellular Mobile with Bluetooth®, WLAN and RFID User Manual Part 3 of 3

Panasonic Mobile Communications Development of Europe Ltd UMTS/ GSM Cellular Mobile with Bluetooth®, WLAN and RFID Part 3 of 3

User Manual Part 3 of 3

8-1
Digital TV
Initial Setup
Set channels for your area.
Main Menu 4 TV 4 Channel Setting 4 Select Area
1 Select a region 7 Select a prefecture 7
YES
Automatic Channel Setup
If manual setup fails, try automatic channel setup.
Main Menu 4 TV 4 Channel Setting 4 Automatic
1
YES
7 After channel search,
YES
7 Enter title
Watching TV
1 1
2 Select a channel
Direct Channel Access Q – O
G(Channel 10)
P(Channel 11)
H(Channel 12)
Previous/Next Channel <z
Channel Search Press and hold <z
⿟To stop: A[Cancel]/K
3 To end TV, L 7
End TV
Viewer
Others
8-2
Others
Indicators
❶
❷
❸
󱀔
󱀕
❺❻❼ ❽ ❾󱀓
󱀖
❹
❶
Indicator Display
❷
󱀕󱀔 ❺❻ ❽❼ ❾󱀓󱀗
Item Description Operation (Normal Position)
●❶Image — —
●❷Captions — —
●❸Data Broadcast (ZP.5-7) —
●❹Data Broadcast Mode Data Broadcast Mode off
Data Broadcast Mode on
1[To TV]/[To DBC]2
●❺Off timer (ZP.5-9) —
●❻ECO Mode (ZP.18-14) —
●❼Channel (ZP.5-4)
⿟When multiple programs are available in
the same broadcasting station, "service
number/total numbers" appears.
—
●❽Signal Strength Level
Strong←――→Weak Out of range —
●❾Receiving Captions — —
●󱀓Volume —
⿟Adjust volume: ?z1
⿟Mute/Resume: K1
●󱀔Program Title —J/A3
●󱀕Recorder Status1
Recording Timer Set (ZP.5-11, P.5-13)
●󱀖Display/Caption2Display: ON/OFF/Large
Caption: ON/OFF
J
⿟Each key press toggles settings.
●󱀗Indicator/Caption3 Indicators: ON/OFF
Caption: Upper position/Lower position/OFF
J
⿟
Each key press toggles settings.
1 Only when Data Broadcast Mode is off　2 Only in Portrait View　3 Only in Landscape View
8-3
Others
Recording/Playing Programs
Recording Current Program
Recordings are saved to microSD Card.
1 Activate TV 7 *z[Record]
2 *z[Stop] to stop recording
■Capture Screenshots
＞Activate TV (Data Broadcast Mode off) 7 press and hold F
Playing Recorded Programs
Main Menu 4 Data Folder 4 TV 4 Video
1 Select a video
Playback starts.
2 K to stop playback
■Playback Operations
Volume ?z
Mute/Cancel Mute S[/ ]
Fast-forward Nz (Press once: 10x; Press twice: 30x)
Fast-rewind Vz (Press once: 10x; Press twice: 30x)
Pause/Resume *z[/ ]
Play Frame by
Frame
Pause playback 7 A[Frame]
Skip Rewind1Press and hold Vz/G
Skip Forward2Press and hold Nz/H
Toggle Playback
Speed
A[///(Summary View)]
View Title J
Toggle Data View Display title 7 J
⿟In Landscape View, each key press toggles indicators
(icons) and captions on/off.
(Each key press also switches time bar position
regardless of whether caption is shown.)
Toggle Display
View/Data View
F
⿟When Data Broadcast Mode is off, each key press
toggles views.
⿟When Data Broadcast Mode is on, each key press
toggles Data View.
Data Broadcast
Mode On/Off
1
⿟In Landscape View, turn program title on.
1 Unavailable if file is under 12 seconds long.
2 Unavailable if file is under 28 seconds long.
8-4
Others
Timer
Main Menu
4
TV
1
Timer Watching
or
Timer Recording
2 A[New] 7 Select an item
Set a channel, date and time to start and end viewing/recording a program,
etc.
3 A[Finish] 7 For
Timer Recording
, select
YES
or
YES
(confirm once)
8-5
Others
Picture Album
View still images in Pictures folder (Data Folder) using Picture
Album. Slideshow is also available.
⿟Only JPEG files are supported by Picture Album.
⿟Operation descriptions are based on Viewer Position.
Viewing Still Images
1 tab 7
Data Folder
or
Camera
7
Pict. Album
Folder list appears.
2 Tap a folder
File list appears.
3 Tap a file
File image appears.
Note
⿟Copy protected files are not viewable.
⿟Connect handset to a TV (ZP.11-18) and view images using Picture Album.
Folder List
Picture Album Functions
Tap icons to access functions. Follow onscreen instructions.
Folder List
File List
Image Window
❸
❸
❸❻
❹
❺
❷
❷
❷
❶
❶
❶
8-6
Others
Item Description
❶Guide View operating instructions
❷Activate
Camera-Touch1
Activate Camera in Digicam mode
❸Menu View function menu
❹Folder List View folder list
❺File List View file list
❻Face Zoom2Zoom in on faces
⿟When more than one face is detected, tap icon to
zoom in on another face.
1 Available only when Picture Album is activated by in Digicam mode.
2 Available only when faces are detected
Note
⿟Each tap in Image window toggles indicators on/off. (In Normal Position, press
F[].)
⿟Face Zoom may not be available depending on still image. Faces detected by
Beauty plus (ZP
.10-29) may not correspond with those detected by Face
zoom.
■Scroll Page/Screen
⿟Slide left/right to scroll files in file list.
⿟Slide left/right to scroll images in Image window.
■Zoom
＞In Image window,
Menu
7
Zoom
7 Adjust Slide Lever
⿟To cancel:
CLR
Note
⿟In Normal Position, press *z[Zoom] 7 H/G to zoom in/out Image
window. To undo, press *z[Return].
8-7
Others
Slideshow
View files in succession.
1
tab 7
Data Folder
or
Camera
7
Pict. Album
2 View All Images
Menu
7
Slideshow
View Selected Folder
Select a folder 7
Menu
7
Slideshow
Slideshow starts.
Slideshow Operations
Tap Display during slideshow to pause and open menu. Follow
onscreen instructions.
■Change Slideshow Settings
Tap
Settings
while Slideshow is paused to access the following.
Follow onscreen instructions.
Item Operation/Description
Time Set slide display time
Effect Set transition effects
Face zoom Zoom in on faces
Random Shuffle files
Repeat Repeat slideshow
Note
⿟Face zoom may not be available depending on still image. Faces detected by
Beauty plus (ZP
.10-29) may not correspond with those detected by Face
zoom.
9-1
Handset Data Backup
Back up handset data (Phone Book, Calendar, Tasks, Messages,
Notepad, Bookmarks, Content Keys) to microSD Card; restore
handset data after accidental loss/alteration.
Backing up to microSD Card
Main Menu 4 Tools 4 microSD Backup
1 Highlight a category 7 S[Menu] 7
Copy to microSD
(7 For
Bookmarks
, select an item)
2 Enter Phone Password 7
YES
All files of selected category are backed up to microSD Card.
■One File Backup
＞Open a file 7 S[Menu] 7
Copy to microSD
7
YES
Restoring from microSD Card
Main Menu 4 Tools 4 microSD Backup
1 Select a category
2 Restore One Item
Select a file 7 Highlight an item 7 S[Menu] 7
Add to phone
Restore One File
Highlight a file 7 S[Menu] 7
Add to phone
or
Overwrite to phone
7 Enter Phone Password
Restore All Files
S[Menu] 7
Add all to phone
or
Overwr. all to ph.
7
Enter Phone Password
3
YES
Note
⿟Note that
Overwrite to phone
or
Overwr. all to ph.
erases all files of same
category on handset.
⿟Video files of 100 MB or larger cannot be moved from microSD Card to
handset.
⿟Files of 10 MB or larger except for Videos/Books files (.bmo) cannot be moved/
copied from microSD Card to handset.
⿟Data backed up in other SoftBank handsets may not be restored in 001P
depending on type and size.
Appendix
Appendix
9-2
Software Update
Check for 001P software updates and download as required.
⿟Transmission fees do not apply to updates (including checking for updates,
downloading and rewriting).
⿟Software Update may take approximately 30 minutes.
⿟Fully charge battery beforehand. Even if appears, low battery message may
appear. In this case, charge battery until Notification Light/Charging Indicator
goes out.
⿟Select a place where signal is strong and stable.
⿟Other functions are unavailable during update.
⿟Software Update does not affect Phone Book entries, files saved in Data Folder
or other content, but it is recommended that you create a backup of any
important information and data (note that some files cannot be copied).
SoftBank is not liable for damages resulting from loss of data, information, etc.
⿟Do not remove battery during the update. Update will fail.
⿟Software Update failure may disable handset. Contact SoftBank Mobile Customer
Center, Customer Assistance (ZP
.XX).
Main Menu 4 Settings 4 Phone Settings 4 Software Update
4 Software Update
1 A[YES] 7 Follow onscreen instructions
After download is complete, handset automatically
restarts and update begins.
When update is complete,
Software has been successfully updated
.
appears. Handset restarts then Information appears.
Entire process takes approximately 60 seconds.
Update Results
When Information window appears,
Software Updt. Result
7 *z
⿟When Information does not appear,
Main Menu 4 Settings 4 Phone Settings
4 Software Update 4 Update Results
Scheduled Update
Confirmation appears at scheduled update time. Press *z or wait ten seconds
for update to start.
Note
⿟If handset does not power on after Software Update, remove then re-insert
battery and try again. If handset still does not power on, contact SoftBank
Mobile Customer Center, Customer Assistance (ZP
.XX).
⿟SoftBank is not liable for damages resulting from loss of data, information, etc.
⿟Alarm tone does not sound during update.
⿟For more information, visit SOFTBANK MOBILE Corp. Website
(http://www.softbank.jp).
Appendix
9-3
Troubleshooting
Handset does not turn on
・ Was L pressed for more than one second?
・ Is battery level sufficient?
・ Is battery inserted properly? (ZP.XX)
Handset functions do not work after turning power on
・ Does PIN Entry window appear?
PIN Authentication (ZP
.XX) is
ON
. Enter PIN.
USIM not inserted After power-off Insert USIM
or
Inserted USIM is
unavailable to this mobile phone Please insert valid one
appears
when handset is turned on or operations attempted
・ Is USIM Card inserted correctly? (ZP.XX)
・ Is SoftBank specified USIM Card inserted? (ZP.XX)
Unusable USIM Card may be inserted.
・ USIM Card IC chip may be dirty.
Wipe with a clean cloth, then insert USIM Card correctly.
Keypad does not respond
・ Does appear in Standby?
Keyguard (ZP
.XX) is active. Cancel it.
Outgoing calls or Video Calls will not connect or message and Internet
connections are unavailable
・ Does appear?
Is handset out-of-range or in a location where signal is weak?
Move to a location where signal is strong.
・ Does appear?
Cancel Offline Mode (ZP
.XX).
・ Are you using handset overseas?
Set international settings (e.g. Select Operator) to use abroad (ZP
.XX).
Outgoing calls or Video Calls will not connect
・ Is area code entered?
・ Is restricting outgoing calls in Call Barring? (ZP.XX)
Outgoing calls will not connect or busy signal sounds
・ Did you enter area code?
・ Is restricting outgoing calls in Call Barring? (ZP.XX)
Call is interrupted or disconnected
・ Does appear? Is handset out-of-range or in a location where signal is
weak?
Move to a location where signal is strong.
Digital TV does not work
・ Is handset out of terrestrial Digital TV broadcasting service area or in a location
where airwaves are weak?
Move to a location where airwaves are strong (ZP
.XX).
Wi-Fi connection unavailable
・ Does or appear?
Turn on Wi-Fi function (ZP
.XX).
Is handset in a location where signal is weak?
Move to a location where signal is strong.
Display clock is reset
・ Replacing battery does not reset Display clock; however, if battery is removed
for long periods, the clock may be reset. Set Date & Time
(ZP
.XX) or Retrieve NW Info (ZP
.XX) again.
Appendix
9-4
Cannot charge battery
・ Is AC Charger (sold separately) firmly connected to handset or Desktop Holder
(sold separately)? (ZP
.XX)
・ Is AC Charger securely plugged into an outlet?
・ Is battery installed in handset correctly? (ZP.XX)
・ Is handset correctly mounted in Desktop Holder?
・ Make sure handset, battery, Desktop Holder and AC Charging terminals are
clean.
・ Battery may not charge beyond +5°C and +35°C.
・ Battery may need to be replaced.
Handset/accessories feel warm
・ AC Charger/Desktop Holder may warm during charging.
Handset may warm during long use. This is normal if you can hold it
comfortably. Low temperature burns may occur if handset is held against skin
for long periods.
Battery Operating Time is greatly reduced
・ Battery Operating Time may be reduced by environmental factors such as
temperature, charging conditions or signal strength, as well as by operations or
settings. See "Specifications" (ZP
.XX) and "Battery Time" (ZP
.XX).
Warning Signs
Problem Causes and Remedies
appears Handset is out-of-range.
Move to a location where signal is strong.
appears
Keyguard is active (ZP
.XX).
Cancel Keyguard to use keys. Answer calls even if
Keyguard is active.
Low battery message
appears and battery
alarm tone sounds
Battery is low.
Charge (ZP
.XX) or replace battery (ZP
.XX).
Appendix
9-5
Safety Precautions
■Before use, read these safety precautions carefully and use your handset properly.
Keep this guide in a safe place for future reference.
■These safety precautions contain information intended to prevent bodily injury to
the user and to surrounding people, as well as damage to property, and must be
observed at all times.
■SoftBank is not liable for any damages resulting from use of this product.
■These symbols indicate level of harm from failure to observe cautions or improper
usage.
Make sure to understand these symbols and precautions before reading this guide.
Danger Great risk of death or serious injury from
improper use
Warning Risk of death or serious injury from improper
use
Caution Risk of injury or damage to property from
improper use
■Symbol Explanations
Make sure to understand these symbols and precautions before reading this guide.
Prohibited Action Avoid Moisture
Disassembly Prohibited Always Dry Hands First
Compulsory Action Disconnect Power
Source
Handset, Battery, USIM Card, AC Charger (sold
separately) & microSD Card (not included)
Danger
Do not use or leave handset, battery, Charger (sold separately)
or Desktop Holder in locations subject to high temperature,
such as near an open flame/heater, in sunlight or inside a car
on an extremely hot day.
Battery may leak, overheat, explode, catch fire. Handset or related
hardware may deform or malfunction. Part of the casing may also
become hot and cause burns.
Do not use excessive force to attach battery or connect
Charger to handset. Battery or connector may be the wrong
way around.
Battery may leak, overheat, explode or catch fire.
Do not disassemble, modify or solder handset or related
hardware.
May cause accidents such as fire, bodily injury, electric shock or
equipment malfunction. Battery may leak, overheat, explode or catch fire.
Modifying handset is a violation of Radio Law and subject to prosecution.
Do not get handset, battery and Charger wet.
If handset, battery or Charger is left wet or battery is charged after
exposure to liquids such as water or pet urine, overheating, electric
shock, fire, injury or malfunction may occur.
Be mindful of location when using handset, battery and Charger.
Use specified battery, Charger and Desktop Holder (not
included).
Battery may leak, overheat, explode or catch fire, and Charger may
overheat, catch fire or cause malfunction.
Appendix
9-6
Warning
Do not place handset, battery, Charger inside cooking
appliances, such as microwave ovens or high-pressure
containers, or on IH cooking heaters.
Battery may leak, overheat, explode or catch fire. Handset, Charger or
Desktop Holder may overheat, emit smoke, catch fire or cause
malfunction.
Do not drop, throw or otherwise subject to strong force or
impacts.
Battery may leak, overheat, explode, catch fire, or cause electric shock or
damage to handset.
Do not allow liquids (water, pet urine, etc.) or conductive
objects (pencil lead, metal pieces, necklaces, hair pins, etc.) to
contact Charger terminals, external port terminals or microSD
Card slot.
May cause fire or malfunction triggered by short-circuit.
Keep handset off and Charger disconnected near propane gas,
in filling stations or places where flammable gas is generated.
Handset use in such areas may lead to fire. Be sure to turn off handset
before using Osaifu-Keitai® in filling stations. (When IC Card Lock is set,
turn off handset after unlocking setting.)
If handset, battery, Charger emits an unusual sound, smoke or
odor, perform following steps:
1. Unplug Charger from outlet.
2. Turn off handset.
3. Remove battery. (Take care to avoid burns or injuries.)
May cause fire or electric shock.
Caution
Do not place handset, battery or Charger on an unstable
surface.
May fall, causing injury or malfunction. Take extra precautions while
vibration alert is active or during charging.
Keep handset and related hardware out of the reach of young
children.
May result in accidental ingestion or bodily injury.
If for use by child, guardian should teach proper handling and
ensure handset and related hardware is used as directed.
May result in bodily injury.
Battery
Danger
See battery label to confirm battery type.
Do not throw battery into fire.
Battery may leak, explode or catch fire.
Do not pierce battery with a nail or other sharp object, hit it
with a hammer, step on it, or subject it to strong shocks.
Battery may leak, overheat, explode or catch fire.
Label Battery Type
Li-ion 00 Lithium-ion
Appendix
9-7
Do not touch terminals with metallic objects or
carry/store battery with conductive objects (pencil lead, metal
pieces, necklaces, hair pins, etc.).
Battery may leak, overheat, explode or catch fire.
If battery fluid gets into eyes, do not rub; flush with clean
water and see a doctor immediately.
Failure to do so may cause blindness.
Warning
If battery fluid comes into contact with your skin or clothing,
stop handset use immediately and rinse fluid off with clean
water.
Battery fluid is harmful to your skin.
If battery does not charge after specified time, stop charging.
Battery may leak, overheat, explode or catch fire.
If battery emits an unusual odor, overheats, discolors or
deforms, immediately remove battery and move it away as far
as possible from any flame or fire. Take care to avoid burns or
injuries.
Battery may leak, overheat, explode or catch fire.
Caution
Do not dispose of battery with ordinary refuse.
Place tape over the terminals to insulate battery, and take it to a
SoftBank retailer or institution that handles used batteries in your area.
Comply with local waste disposal regulations for recycling.
Handset
Warning
Do not use handset while driving a vehicle.
Doing so may interfere with safe driving and cause an accident. Stop
your vehicle to park in a safe place before using handset. Drivers using
handsets while driving are subject to prosecution.
Do not aim the infrared port at eyes when using infrared
communication.
Doing so may affect eyes.
Do not point Flash directly at someone's eyes. Do not look
directly at Flash while light is on.
May damage eyesight or cause accidents due to momentary
sight loss or surprise. Do not take pictures of infants at close
range.
Turn off handset near high-precision electronic devices or
devices using weak electronic signals.
Handset may cause these devices to malfunction.
*Electronic devices that may be affected: Hearing aids, implantable
cardiac pacemakers, implantable cardioverter defibrillators, other medical
electronic devices, fire alarms, automatic doors and other automatically
controlled devices.
Turn off handset aboard aircraft.
Handset signal may interfere with aircraft operation.
When in-flight handset use is permitted, follow airline instructions for
proper use.
Appendix
9-8
If you have a weak heart, take extra precautions when setting
functions such as Vibration or Ringer Volume for incoming
transmissions.
May affect heart.
In a thunderstorm, immediately turn off handset and seek
shelter.
There is a risk of being struck by lightning and suffering electric shock.
Caution
If handset affects car electronics, stop use.
Handset use may affect electronics in some models. In this case, stop use;
could impede safe driving.
Do not place a magnetic card near or in handset.
The stored magnetic data in cash cards, credit cards, telephone
cards and floppy disks, etc. may be erased.
Do not swing handset by its strap, etc.
Handset may strike you or others, or strap may be broken resulting in
injury or damage to handset or other property.
Do not place your ear too close to the speaker while ringer
sounds or sound files play.
May impair hearing.
If skin abnormality occurs, immediately stop use and seek
medical treatment.
Handset contains metals. Handset use may cause itching, rashes, eczema
or other symptoms depending on the user's physical condition.
Parts Materials/Surface Finish
Outer case
Display side,
Lateral side of Display
PC resin/Evaporated tin,
Acrylic UV cured coating
Rear side of Display,
Keypad side PA resin/Acrylic UV cured coating
Battery side,
Battery cover
PC+ABS resin/
Acrylic UV cured coating
Bottom part of Display panel,
Screw covers on Battery side
ABS resin/
Acrylic UV cured coating
Hinge
Rear side of Display PC+ABS resin/Evaporated tin,
Acrylic UV cured coating
Display side PA resin/Acrylic UV cured coating
Screw covers PET resin
Earpiece area
Acrylic resin/
Hard coating film with evaporated
tin
Display panel PET resin/Hard coating
Corner parts of Display Elastomer resin
Keypad, Camera ring part, Stop pads Acrylic urethane resin
Side Key
PC resin/Evaporated aluminium,
Acrylic UV cured coating
Notification Light/Charging Indicator PC resin
Camera lens Acrylic resin/Hard coating
Photo Light/Infrared port PC resin/Acrylic UV cured coating
TBD
Appendix
9-9
If skin abnormality occurs, immediately stop use and seek
medical treatment.
Handset contains metals. Handset use may cause itching, rashes, eczema
or other symptoms depending on the user's physical condition.
Parts Materials/Surface Finish
Outer case
Display side,
Lateral side of Display
PC resin/Evaporated tin,
Acrylic UV cured coating
Rear side of Display,
Keypad side PA resin/Acrylic UV cured coating
Battery side,
Battery cover
PC+ABS resin/
Acrylic UV cured coating
Bottom part of Display panel,
Screw covers on Battery side
ABS resin/
Acrylic UV cured coating
Hinge
Rear side of Display PC+ABS resin/Evaporated tin,
Acrylic UV cured coating
Display side PA resin/Acrylic UV cured coating
Screw covers PET resin
Earpiece area
Acrylic resin/
Hard coating film with evaporated
tin
Display panel PET resin/Hard coating
Corner parts of Display Elastomer resin
Keypad, Camera ring part, Stop pads Acrylic urethane resin
Side Key
PC resin/Evaporated aluminium,
Acrylic UV cured coating
Notification Light/Charging Indicator PC resin
Camera lens Acrylic resin/Hard coating
Photo Light/Infrared port PC resin/Acrylic UV cured coating
Parts Materials/Surface Finish
TV Antenna
Tip: Resin part, Base: Cap ABS resin/Acrylic UV cured coating
Metal part
(Upper, middle part) Stainless steel
Metal part (Lower part) NiTi alloy
Base: Hinge Stainless steel
Base: Hinge (Pullout part)
Brass/Tin-cobalt plating
Base: Cap (Metal part) Stainless steel
External Port terminals Stainless steel/
Tin plating on nickel plating
External Port
Cover
Port Cover PC resin, Elastomer resin/
Acrylic UV cured coating
Packing Silicon rubber
Charging Terminals Brass/Gold plating on nickel
plating, palladium plating
Inner Cover PC resin, Silicon rubber
Battery compartment PC resin
Screws (Battery compartment) Iron/Chrome plating
microSD Card
slot (Battery
compartment)
Resin part LCP resin
Metal part Stainless steel/Nickel plating
Battery
terminals
Resin part PPS resin
Terminals Beryllium copper/
Gold plating on nickel plating
Battery
Battery PC resin (Label: PET resin)
Terminals
Glass fiber reinforced epoxy board/
Gold plating on nickel plating
Handset may become hot while used in a hot environment.
Avoid prolonged skin contact that may result in burns.
Make sure not to trap fingers or objects when
opening/closing handset.
May result in injury or damage to display.
Watch TV with adequate lighting and distance from Display.
May damage eyesight.
Do not turn up the volume unnecessarily high when using
earphones.
Using earphones with volume turned up for an extended period may
impair hearing or injure ears.
AC Charger (sold separately)
Warning
Do not cover or wrap Charger during charging.
May cause overheating, fire or malfunction.
Always use the specified power supply/voltage.
Using incorrect voltage may cause fire or malfunction.
AC Charger: AC100V-240V (household AC outlet only)
In-Car Charger: DC12V
, 24V (vehicles with a negative earth only)
Use In-Car Charger in vehicles with a negative (-) earth.
Do not use In-Car Charger if vehicle has a positive (+) earth.
May cause fire.
Do not use Charger in thunderstorms.
There is a risk of suffering electric shock.
TBD
Appendix
9-10
Do not handle Charger with wet hands.
May cause electric shock or malfunction.
If In-Car Charger fuse blows, always replace it with specified
fuse.
Using the incorrect fuse may cause fire or malfunction. Refer to the
respective manuals for information on the correct fuse specifications.
If dust accumulates on plug, unplug Charger and wipe with a
dry cloth.
May cause fire.
When plugging Charger into outlet, keep conductive materials
(pencil lead, metal parts, necklaces, hair pins, etc.) away from
Desktop Holder terminals or Charger plug/terminals and plug
Charger firmly into outlet.
May cause electric shock, short-circuit or fire.
Unplug Charger during periods of disuse.
May cause electric shock, fire or malfunction.
If liquid such as water or pet urine get into Charger, unplug it
immediately.
May cause electric shock, smoke emission or fire.
Caution
Pull Charger (not cord) to unplug Charger.
Pulling on the cord may damage the cord and cause electric shock or fire.
Always unplug Charger before cleaning it.
May result in electric shock.
Near Electronic Medical Equipment
Warning
This section is based on "Guidelines on the Use of Radio Communications
Equipment such as Cellular Telephones and Safeguards for Electronic
Medical Equipment" (Electromagnetic Compatibility Conference, April
1997) and "Report of Investigation of the Effects of Radio Waves on
Medical Equipment, etc." (Association of Radio Industries and Businesses,
March 2001).
If you use an implantable cardiac pacemaker or cardioverter
defibrillator, keep handset more than 22 cm away from the
implant at all times.
Handset radio waves may affect implantable cardiac pacemaker or
cardioverter defibrillator operations.
Persons using electronic medical equipment outside medical
facilities should consult the vendor about possible radio wave
effects.
Handset radio waves may affect electronic medical equipment operations.
Observe the following in medical facilities. Handset radio
waves may affect electronic medical equipment.
• Do not take handset into operating rooms, Intensive Care Units or
Coronary Care Units.
• Turn off handset inside hospital wards.
• Turn off handset even outside hospital wards (in hospital lobbies, etc.);
electronic medical equipment may be in use nearby.
• Where a medical facility has specific instructions prohibiting the
carrying and use of mobile phones, observe those instructions strictly.
Appendix
9-11
Turn off handset in crowded places such as rush hour trains;
implantable cardiac pacemakers or cardioverter defibrillators
may be in use nearby.
Handset radio waves may affect implantable cardiac pacemaker or
cardioverter defibrillator operations.
Handling Precautions
General Notes
⿟SoftBank is not liable for damages from accidental
loss/alteration/repair of handset/microSD Card information (Phone
Book entries, image/sound files, etc.). Back-up important information.
⿟Handset transmissions may be disrupted inside buildings, tunnels or
underground, or when moving into/out of such places.
⿟Use handset without disturbing others.
⿟Handsets are radios as stipulated by the Radio Law. Under the Radio
Law, handsets must be submitted for inspection upon request.
⿟Handset use near landlines, TVs or radios may cause interference.
⿟Read microSD Card manual beforehand for proper use.
⿟Beware of eavesdropping.
Digital signals reduce interception, however transmissions may be overheard.
Deliberate/accidental interception of communications constitutes eavesdropping.
"eavesdropping" means radio communication is received by another receiver
deliberately or accidentally.
⿟Be cautious of unsafe websites. Take extra precautions especially
when posting personal information on websites.
Appendix
9-12
Electromagnetic Waves
⿟For body worn operation, this mobile phone has been tested and
meets RF exposure guidelines when used with an accessory containing
no metal and positioning the handset a minimum 15 mm from the
body. Use of other accessories may not ensure compliance with RF
exposure guidelines.
FCC Notice
⿟This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
　 (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
⿟Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user's authority to operate
the equipment.
FCC RF Exposure Information
Your handset is a radio transmitter and receiver. It is designed and manufactured
not to exceed the emission limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission of the U.S. Government.
The guidelines are based on standards that were developed by independent
scientific organization through periodic and thorough evaluation of scientific
studies. The standards include a substantial safety margin designed to assure the
safety of all persons, regardless of age and health.
The exposure standard for wireless handsets employs a unit of measurement
known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6
W/kg. The tests are performed in positions and locations (e.g. at the ear and worn
on the body) as required by the FCC for each model.
The highest SAR value for this model handset as reported to the FCC when tested
for use at the ear is 0.415 W/kg, and when worn on the body in a holder or carry
case, is 0.119 W/kg.
Body-worn Operation; This device was tested for typical body-worn operations with
the back of the handset kept 1.5 cm from the body. To maintain compliance with
FCC RF exposure requirements, use accessories that maintain a 1.5 cm separation
distance between the user's body and the back of the handset. The use of beltclips,
holsters and similar accessories should not contain metallic components in its
assembly.
The use of accessories that do not satisfy these requirements may not comply with
FCC RF exposure requirements, and should be avoided. The FCC has granted an
Equipment Authorization for this model handset with all reported SAR levels
evaluated as in compliance with the FCC RF emission guidelines. SAR information
on this model handset is on file with the FCC and can be found under the Display
Grant section of
http://www.fcc.gov/oet/ea/ after searching on FCC ID UCE210035A.
Additional information on Specific Absorption Rates (SAR) can be found on the
Cellular Telecommunications & Internet Association (CTIA) website at http://www.
phonefacts.net.
Appendix
9-13
European RF Exposure Information
Your mobile device is a radio transmitter and receiver. It is designed not to exceed
the limits for exposure to radio waves recommended by international guidelines.
These guidelines were developed by the independent scientific organization ICNIRP
and include safety margins designed to assure the protection of all persons,
regardless of age and health.
The guidelines use a unit of measurement known as the Specific Absorption Rate,
or SAR. The SAR limit for mobile devices is 2 W/kg and the highest SAR value for
this device when tested at the ear was 0.355 W/kg*. As mobile devices offer a
range of functions, they can be used in other positions, such as on the body as
described in this user guide**. In this case, the highest tested SAR value is
0.203 W/kg. As SAR is measured utilizing the devices highest transmitting power
the actual SAR of this device while operating is typically below that indicated
above. This is due to automatic changes to the power level of the device to ensure
it only uses the minimum level required to reach the network.
The World Health Organization has stated that present scientific information does
not indicate the need for any special precautions for the use of mobile devices.
They note that if you want to reduce your exposure then you can do so by limiting
the length of calls or using a hands-free device to keep the mobile phone away
from the head and body.
*The tests are carried out in accordance with international guidelines for testing.
** Please see SoftBank Body SAR Policy on page XX-XX for important notes
regarding body worn operation.
Declaration of Conformity
We, Panasonic Mobile Communications Development of Europe Ltd.,
declare that SoftBank 001P conforms with the essential and other
relevant requirements of the directive 1999/5/EC.
A declaration of conformity to this effect can be found at
http://panasonic.net/pmc/support/index.html
⿟This product is only intended for sale in Japan.
⿟Compliance to the European RTTE directive applies to: SoftBank 001P
handset, battery (PMBAS1) and AC Charger (SoftBank ZTDAA1, marked
MITSUMI).
Handset Care
⿟001P is not waterproof. Avoid exposure to liquids and high humidity.
• Do not expose handset to precipitation.
• Air conditioned air may cause condensation, resulting in corrosion.
• Do not put handset in damp places like bathrooms.
• On the beach, keep handset away from sun and surf.
• Perspiration in handset may cause malfunction.
⿟If handset is left with no battery or an exhausted one, data may be
altered/lost. SoftBank is not liable for any resulting damages.
⿟Use handset within temperatures of 5°C to 35°C and humidity 35% to
85%. Avoid extreme temperatures/direct sunlight.
⿟Handset may become warm during use or charging. This is not
malfunction.
⿟Battery may swell as service life nears end; this is not a problem.
Appendix
9-14
⿟Exposing lens to direct sunlight may damage color filter and affect
image color.
⿟Soiled terminals may cause poor connection. If the terminals are dirty,
use a dry cloth or cotton swab to wipe them clean.
⿟Clean handset with dry, soft cloth. Using alcohol, thinner, etc. may
damage it.
⿟Avoid forceful rubbing or scratching handset display.
⿟Do not subject handset to excessive force.
• Do not sit down with handset in a back pocket.
• Do not place heavy objects on a bag with handset inside.
⿟Do not remove nameplate from handset; doing so invalidates
warranty.
⿟Always turn off handset before removing battery. If battery is
removed while saving or sending mail, data may be altered or lost.
⿟LCD is manufactured with high precision technology, however, some
pixels may appear darker/brighter.
⿟Connect only specified products to External Port.
⿟While walking, moderate earphone volume to make sounds around
you audible and help avoid accidents.
⿟When holding handset in use, do not cover Speaker.
Function Usage Limits
These functions are disabled after handset replacement/upgrade or
service cancellation: Camera; Digital TV; Music Player;
S! Appli; Lifestyle-Appli; Wi-Fi.
After a period of disuse, these functions may become unusable.
Multitasking during Calls/Data Transmissions
⿟Transmission fees apply while other functions are used during a call/
data transmission.
Mobile Camera
⿟Be sure to observe proper etiquette when using the camera.
⿟Do not expose the camera lens to direct sunlight. Concentrated
sunlight through the lens may cause the handset to malfunction.
⿟Be sure to try taking and previewing pictures before using the camera
on important occasions like wedding ceremonies.
⿟Do not commercially use or transfer pictures taken with the camera
without the permission of the copyright holder (photographer), except
for personal use.
⿟Do not use the camera in locations where taking photos and recording
videos are prohibited.
Appendix
9-15
Bluetooth®/Wi-Fi
⿟Bluetooth®/Wi-Fi connection is not guaranteed with all Bluetooth®/
Wi-Fi devices.
⿟Handset complies with Bluetooth®/Wi-Fi security standards. However,
this does not ensure 100% security.
⿟SoftBank is not liable for damages arising from accidental data/
information leakage during Bluetooth®/Wi-Fi transmissions.
⿟Wi-Fi function is only intended for use in Japan. This handset's Wi-Fi
function is certified as compliant with the radio standard in Japan.
Wi-Fi function should be disabled when travelling outside Japan. Use
in other countries may contravene local regulations.
⿟Bluetooth®/Wi-Fi shares the same frequency band with other
industrial/scientific/medical equipment (microwave ovens, etc.), radio
stations, amateur radio stations, etc. (hereinafter "other radio
stations").
1 Before using Bluetooth®/Wi-Fi function, visually check that there
are no other radio stations sharing same frequency band nearby.
2 Should interference occur between this handset and other radio
stations, move to another place or stop Bluetooth®/Wi-Fi function
(stop the transmission) immediately.
3 For additional information and support, contact us at the following
number.
SoftBank Mobile Customer Center;
From a SoftBank handset, call toll free at 157 for General
Information.
From landlines, see ZP.XX "Customer Service."
Wireless Frequency Bands
⿟Bluetooth® frequency band information is as follows:
•This radio station uses 2.4 GHz band with FH-SS modulation,
and its maximum communication distance is 10 m.
•This radio station uses 2400 – 2483.5 MHz band. Avoiding
frequency band of mobile unit identification apparatus is not
possible.
⿟Wi-Fi frequency band information is as follows:
•This radio station uses 2.4 GHz band with DS-SS/OFDM
modulation, and its maximum communication distance is 40
m.
•This radio station uses 2400 – 2483.5 MHz band. Avoiding
frequency band of mobile unit identification apparatus is
possible.
Precautions for Wi-Fi Usage
⿟Do not use Wi-Fi function near magnetic devices or sources of
magnetic waves.
• Magnetic waves or electrostatic noise may cause noise/interference (especially
when a microwave oven is in use).
• Wi-Fi use near TVs or radios may affect TV/radio reception.
• When multiple access points using the same channel are nearby, target access
point may not be found.
Appendix
9-16
Copyrights and Others
Right of Portrait
Portrait right is the right of an individual to refuse to be photographed by
others and protects from the unauthorized publication or use of an individual's
photograph by others. Right of personality is a portrait right applicable to all
citizens and right of publicity is a portrait right (property right) designed to
protect celebrities' interests. Be careful when taking pictures with the handset
camera. Photographing, publicizing and distributing photographs of citizens
and celebrities without permission are illegal.
Copyrights
So
unds, images, computer programs, databases, other copyrighted
materials, their respective works and copyright holders are protected by
copyright laws. Duplicated materials are limited to private use only. If
duplications (including conversion of data types), modifications, transfer
of duplicates or distribution on networks are made without permission
of copyright holders, this constitutes "Literary Piracy" and "Infringement
of Copyright Holder Rights" and a criminal action for reparations and
criminal punishment may be filed. If duplicates are made using handset,
please observe the copyright laws. Materials captured with handset
cam
era are also subject to the above.
This product is licensed under the MPEG-4 patent portfolio license, AVC
patent portfolio license and VC-1 patent portfolio license for the
personal and non-commercial use of a consumer to
(i) encode video in compliance with the MPEG-4 Visual Standard, AVC
Standard and VC-1 Standard ("MPEG-4/AVC/VC-1 Video") and/or
(ii) decode MPEG-4/AVC/VC-1 Video that was encoded by a consumer
engaged in a personal and non-commercial activity and/or was obtained
from a licensed video provider licensed to provide MPEG-4/AVC/VC-1
video.
No license is granted or implied for any other use.
Additional information may be obtained from MPEG LA, L.L.C. See http://
www.mpegla.com.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and
Thomson.
This product is protected by certain intellectual property rights of
Microsoft Corporation and third parties. Use or distribution of such
technology outside of this products is prohibited without a license from
Microsoft or an authorized Microsoft subsidiary and third parties.
Windows Media®, Microsoft®, Windows® and Windows Vista® are
trademarks or registered trademarks of Microsoft Corporation in the
United States and other countries.
The abbreviations used for respective operating systems (Japanese
version) in this guide are as shown below:
Windows® 7 is the abbreviation of Microsoft® Windows® 7 (Starter, Home
Basic, Home Premium, Professional, Enterprise and Ultimate).
Windows Vista® is the abbreviation of Windows Vista® (Home Basic,
Home Premium, Business, Enterprise, and Ultimate). Windows® XP is the
abbreviation of Microsoft® Windows® XP Professional operating system
or Microsoft® Windows® XP Home Edition operating system.
Microsoft Windows operating system is abbreviated as "Windows" in
this guide.
Appendix
9-17
Java and all Java based trademarks and logos are trademarks or
registered trademarks of Sun Microsystems, Inc. in the U.S. and other
countries.
Aplix, microJBlend and JBlend, and all Aplix-
or JBlend-related trademarks and logos are
trademarks or registered trademarks of Aplix
Corporation in the U.S., Japan and other countries.
QR Code is a registered trademark of DENSO WAVE INCORPORATED.
microSDHC Logo is a trademark.
Chaku-Uta® and Chaku-Uta Full® are registered trademarks of
Sony Music Entertainment (Japan) Inc.
Machi-Uta® is a registered trademark of KDDI CORPORATION.
This product is protected by certain intellectual property rights of
Microsoft Corporation. Use or distribution of such technology outside of
this product is prohibited without a license from Microsoft or an
authorized Microsoft subsidiary.
Content providers are using the digital rights management technology
for Windows Media contained in this device
("WM-DRM") to protect the integrity of their content
("Secure Content") so that their intellectual property, including
copyright, in such content is not misappropriated. This device uses
WM-DRM Software to play Secure Content ("WM-DRM Software"). If the
security of the WM-DRM Software in this device has been compromised,
owners of Secure Content
("Secure Content Owners") may request that Microsoft revoke the
WM-DRM Software's right to acquire new licenses to copy, display and/
or play Secure Content. Revocation does not alter the WM-DRM
Software's ability to play unprotected content. A list of Revoked
WM-DRM Software is sent to your device whenever you download a
license for Secure Content from the Internet or from a PC. Microsoft may,
in conjunction with such license, also download revocation lists onto
your device on behalf of Secure Content Owners.
This product contains software licensed complying with GNU General Public
License (GPL), GNU Lesser General Public License (LGPL), etc.
For more details, follow these steps:
Main Menu
→
Settings
→
Phone
Settings
→
GPL License etc
.
Bluetooth® is a registered trademark of
the Bluetooth SIG, Inc.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc.
and any use of such marks by Panasonic Mobile Communications Co.,
Ltd. is under license.
Other trademarks and trade names are those of their respective owners.
This product is loaded with Bluetooth™ Stack for Embedded Systems
Spec 2.0 by Toshiba Corp.
Appendix
9-18
Powered by MascotCapsule®
MascotCapsule® is a registered trademark of HI CORPORATION
© 2010 HI CORPORATION. All Rights Reserved.
The image stabilization technology utilized is PhotoSolid®, a product of
Morpho, Inc.
The fast image rendering engine utilized is ImageSurf®, a product of
Morpho, Inc.
PhotoSolid® and ImageSurf® are registered trademarks of Morpho, Inc.
FeliCa is a contactless IC card technology developed by Sony
Corporation.
FeliCa is a registered trademark of Sony Corporation.
is a registered trademark of FeliCa Networks, Inc.
"Osaifu-Keitai" is a registered trademark of NTT DoCoMo, Inc. in Japan.
This product contains NetFront Mobile Client Suite of ACCESS CO., LTD.
ACCESS and NetFront are trademarks or registered trademarks of
ACCESS CO., LTD. in the United States, Japan and other countries.
©2008 ACCESS CO., LTD. All rights reserved.
This software is based in part on the work of the Independent JPEG
Group.
IrFront is a trademark or registered trademark of ACCESS CO., LTD.
in Japan and other countries.
The IrDA Feature Trademark is owned by the Infrared Data
Association and used under license therefrom.
This product contains Adobe® Flash® Lite™ Player
under license from Adobe Systems Incorporated.
Copyright© 1996-2008 Adobe Macromedia
Software LLC. All rights reserved.
Adobe, Flash and Flash Lite are either registered
trademarks or trademarks of Adobe Systems
Incorporated in the United States and/or other
countries.
"AutoArt" adopted by this product is based on Emoji Lite®, protected by
the intellectual property rights of Acrodea, Inc.
AirStation™ and AOSS™ are the trademarks of BUFFALO INC.
The Twitter name, logo, Twitter T and Tweet are trademarks of Twitter,
Inc. in the United States and other countries.
SOFTBANK, SOFTBANK's equivalent in Japanese and the SOFTBANK logo
are registered trademarks or trademarks of SOFTBANK CORP. in Japan
and other countries.
S! Mail, Navi Appli, MOBILE WIDGET, Graphic Mail, PC Mail, Location Navi
and Keitai Wi-Fi are trademarks or registered trademarks of SOFTBANK
MOBILE Corp.
Yahoo! and the "Yahoo!" or "Y!" logos are trademarks and/or registered
trademarks of Yahoo! Inc. in the U.S.
This product is manufactured or sold under license from InterDigital
Technology Corporation.
Other company and product names mentioned herein are trademarks or
registered trademarks of their respective owners.
The software contained in 001P is copyrighted material;
copyright, moral right and other related rights are protected by
copyright laws. Do not copy, modify, alter, disassemble, decompile or
reverse-engineer the software, and do not separate it from hardware in
whole or part.
Appendix
9-19
Specific Absorption Rate (SAR)
This mobile phone 001P meets the MIC's* technical regulation for
exposure to radio waves.
The technical regulation established permitted levels of radio frequency
energy, based on standards developed by independent scientific
organizations through periodic and thorough evaluation of scientific
studies.
The regulation employs a unit of measurement known as the Specific
Absorption Rate, or SAR.
The SAR limit is 2 watts/kilogram (W/kg)** averaged over ten grams of
tissue.
The limit includes a substantial safety margin designed to assure the
safety of all persons, regardless of age and health.
The value of the limit is equal to the international guidelines
recommended by ICNIRP***.
All mobile phones should be confirmed to comply with the regulation,
before they are available for sale to the public.
The highest SAR value for this mobile phone is 0.526 W/kg when tested
for use at the ear.
The test for SAR was conducted in accordance with MIC's testing
procedure, using standard operating positions, with the phone
transmitting at its highest permitted power level.
While there may be differences between the SAR levels of various
phones and at various positions, all phones meet MIC's technical
regulation.
Although the SAR is determined at the highest certified power level, the
actual SAR of the phone during operation can be well below the
maximum value.
For more information about SAR, see the following websites:
⿟Ministry of Internal Affairs and Communications (MIC)
http://www.tele.soumu.go.jp/e/sys/ele/body/index.htm
⿟Association of Radio Industries and Businesses (ARIB)
http://www.arib-emf.org/ (Japanese)
*Ministry of Internal Affairs and Communications
**The technical regulation is provided in Article 14-2 of the Ministry Ordinance
Regulating Radio Equipment.
***International Commission on Non-Ionizing Radiation Protection
Appendix
9-20
Specifications
001P
Weight (including battery) 142 g*
Dimensions (closed) 52 x 116 x 17.8 (thinnest part)
/21 (thickest part) mm*
Standby Time 3G 620 hours*
GSM 350 hours*
Talk Time
3G 230 minutes*
Video Call 150 minutes*
GSM 230 minutes*
TV Reception
Time
Normal Mode 3.5 hours*
ECO Mode 5.75 hours*
Charging Time AC Charger 130 minutes*
In-Car Charger 130 minutes*
Maximum Output 3G 0.25 W
GSM 2.0 W
* Approximate value
Battery
Voltage 3.7 V
Battery Type Lithium-ion
Capacity 800 mAh
Dimensions 45 x 4.5 x 37 mm*
* Approximate value
⿟Specifications subject to change without notice.
Support
Warranty
Warranty is provided when you purchase a 001P.
⿟Check name of distributor and date of purchase.
⿟Read through contents and keep in a safe place.
⿟The warranty term is described in the warranty.
SoftBank is not liable for any damage resulting from use of this
product.
After-Sales Service
See "Troubleshooting" (ZP.XX) before contacting SoftBank for
service or repairs. If you cannot find solutions or solve problems,
contact SoftBank Mobile Customer Center, Customer Assistance
(ZP.XX) in your subscription area and provide a detailed
description of the problem.
⿟Repairs within warranty are performed under terms and conditions described.
⿟Out of warranty, any repairs are performed upon request at subscriber's expense.
Appendix
9-21
Customer Service
For information about SoftBank handsets or services, call General Information.
For repairs, call Customer Assistance.
SoftBank Mobile Customer Center
If you cannot reach a toll free number, use the number (charges apply) below for your service area:
Hokkaido Area, Tohoku Area
Hokuriku Area, Kanto Koshinetsu Area 022-380-4380 Tokai Area 052-388-2002
Kansai Area 06-7669-0180 Chugoku, Shikoku Area
Kyushu, Okinawa Area 092-687-0010
SoftBank Mobile Global Call Center
General
From a SoftBank handset, dial toll free at 157
From a landline/IP phone, dial toll free at 0800-919-0157
Customer
From a SoftBank handset, dial toll free at 113
From a landline/IP phone, dial toll free at 0800-919-0113
From outside Japan, dial +81-3-5351-3491 (toll free from SoftBank handsets)
If handset is lost/stolen, call this number immediately (international charges apply)
Please help the mobile industry maintain high environmental standards. Recycle your old
handsets, batteries and charger units (all manufacturers and brands). Before you recycle, please
remember these important points:
◦.
Handsets, batteries and chargers submitted for recycling cannot be returned.
◦..
Always erase all data recorded on old handsets (Phone Book entries, call records, mail, etc.) before recycling.
SoftBank 001P User Guide
February 2011, First Edition
SOFTBANK MOBILE Corp.
For additional information, please visit a SoftBank shop.
Model: SoftBank 001P
Manufacturer: Panasonic Mobile Communications Co., Ltd.
3TR100349AAA
S0211-1

Navigation menu