Panasonic of North America 927130TX FM Transmitter used With TV/VCR User Manual Amended Pgs 32 to 37

Panasonic Corporation of North America FM Transmitter used With TV/VCR Amended Pgs 32 to 37

Amended User Manual Pgs 32 to 37

32 For assistance, call 1-800-211-PANA(7262)VIDEO INVIDEO INAUDIO INAUDIO INPOWERPOWERVOLVOLCHCHSTOP/EJECTSTOP/EJECTREW/REW/PLAY/REPEATPLAY/REPEATFF/FF/RECRECTIMER/FMTIMER/FMACTIONACTIONRECRECON TIMERON TIMERPROG TIMERPROG TIMERWeak Signal Display ON/OFF1Display MAIN MENU.Press ACTION*.Display SET UP CHscreen. 1) Press to select “CH.”2) Press ACTIONto display.Select WEAK SIGNALDISPLAY.1) Press toselect.2) Press toset “ON” or“OFF.”Return to the normalscreen.Press ACTION twice.2When “ON” is selected, picture is displayed even whenbroadcast signal is weak or nonexistent.43• “ON” = Picture is displayed regardless of signal condition, andmay not always be clearly visible.“OFF” = Screen turns solid blue when signal is absent or weak.• If unit is connected to equipment which has blue back feature,selecting “ON” will have no effect on the other equipment.VCR LockAll operations are prohibited except Timer recording and tapeeject. Useful for families with small children.To turn “ON.”In stop mode, holddown REC on theunit without acassette inserted for7 seconds.To turn “OFF.”Repeat above withor without cassette.• VCR Lock is canceled automaticallyafter about 24 hours if clock is set.RECSpecial VCR Features (continued)NotesC H+VOLVOLC HC H+VOLVOLC HANTENNA : CABLEAUTO SETCHANNEL CAPT I ONWEAK S I GNAL GNAL D I SPLAYSPLAY : OFFOFFCABLE BOX SET UPVCR P l u s+ CH SET UPSELECT : KEYSET : KEYEND : ACT I ON KEY SET UP CHANNEL C H+VOLVOLC HVCR+ACTION2 •3SET SELECT :CH UP :CH DOWN :VOL UP :VOL DOWN1 •2 •4Model PV-C2060 unit is shown here.RECRECVCR LOCK ACT I VATEDVCR LOCK OFF M A I N MENUCLOCKC HSET : ACT I ON KEYSELECT : KEY VCRT VEX I TLANGUAGEC2060- P32-33 99.12.14, 11:33 PM32
33Advanced OperationCopy Your Tapes (Dubbing)Connections you’ll need to make.Playback (Source) VCR1Recording (Editing) unitInsert pre-recorded tape.Put in Standbymode.Press PLAY thenPAUSE at startingpoint.Start dubbing.Press PLAY.Stop dubbing.Press STOP/EJECT.Insert blank tape withrecord tab.• Dubbing tapes protected with Copy Guard will have poor quality results.Put in Standby mode.Press REC, thenPAUSE/SLOW immediately.Start dubbing.Press PAUSE/SLOW.Stop dubbing.Press STOP.Our Vacation2Select “LINE” mode.See “Selecting Input Mode” section on page 13.345EJECTSTOPPAUSEPLAY•Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement.OUTININ FROMANT.OUT TOTVAUDIO INAUDIOVIDEO INPlaying (Source) VCROUTININ FROMANT.OUT TOTVL-AUDIO IN-RVIDEOR-AUDIO-LVIDEO INPlaying (Source) VCRMONO<Model PV-C2060 unit is shown here.>Caution<Model PV-C2080 unit is shown here.>VIDEORecording (Editing) unitif the remote control POWER, CH Up/Down, NUMBERED keys,ACTION, PROG/VCR+, DISPLAY, SEARCH, R-TUNE, FM/TV,or ADD/DLT button does not work when pressed, press COMBObutton on the remote and try the button again.*Important:Recording (Editing) unitPLAYC2060- P32-33 99.12.14, 11:33 PM33
34 For assistance, call 1-800-211-PANA(7262)VIDEO INVIDEO INAUDIO INAUDIO INPOWERPOWERVOLVOLCHCHSTOP/EJECTSTOP/EJECTREW/REW/PLAY/REPEATPLAY/REPEATFF/FF/RECRECTIMER/FMTIMER/FMACTIONACTIONRECRECON TIMERON TIMERPROG TIMERPROG TIMERFM Radio2FM Radio is ...This unit has an FM radio with built-inantenna, 9 station preset, and a band rangeof 87.5 ~ 108.1 MHz. You can even set theOn-Timer (page 20) to wake up to yourfavorite radio station.Display FM radio mode.Press FM/TV* on the remote orTIMER/FM twice on the unit.Select the FM number.1Continued on the next page...TIMER/FMPress aNUMBERED key(1~9.)To Make Corrections,select station with a NUMBERED key, then do step 3 again.To exit FM mode, press FM/TV on the remote orTIMER/FM twice on the unit.Set the radio station.1) Press CH to select thedesired radiostation.(Each press changes frequency 200 kHz.)2) Press ADD/DLTto set.Quick Station ScanHold down CH or for a fewseconds, then release toscan for FM stations in your area.• To cancel, press CH or while in search mode.3C HC HFM ANTENNA SetupaDisplay MAIN MENU.Press ACTION.Display SET UP TVscreen.1) Press to select “TV.”2) Press ACTIONto display.bC H+VOLVOLC HMake sure FM tuning is done correctly(See FM Radio Setup.)1Model PV-C2060 unit is shown here.FM Radio SetupFM 1 87. 5MHz1 2 : 0 0PMFM 1 8 7. 7MHzMEMORY : PUSH ADD / DLT KEY1 2 : 0 0PMFM 1 8 7. 7MHzMEMOR I ZED1 2 : 0 0PMM A I N MENUT VVCREX I TCLOCKC HLANGUAGESET : ACT I ON KEYSELECT : KEY C2060- FM TRANSMITTER(P34-37) 99.12.14, 11:32 PM34
35Advanced OperationLOCKCAPT I ON INPUT SELCT : TUNERV I DEO ADJUSTFM ANTENNA ANTENNA : I NTNTSELECT : KEYSET : KEYEND : ACT I ON KEY SET UP TV VIDEO INVIDEO INAUDIO INAUDIO INPOWERPOWERVOLVOLCHCHSTOP/EJECTSTOP/EJECTREW/REW/PLAY/REPEATPLAY/REPEATFF/FF/RECRECTIMER/FMTIMER/FMACTIONACTIONRECRECON TIMERON TIMERPROG TIMERPROG TIMERTIMER/FMBDisplay FM radio mode.Press FM/TV on the remote orTIMER/FM twice on the unit.ATo cancel, press FM/TV on the remote or TIMER/FMtwice on the unit.•FM radio cannot be recorded on a Videocassette.•You may get better reception byrepositioning the unit.•You cannot select FM Radio mode duringplayback or record, or while a blue back(PROG, ACTION, MENU) screen isdisplayed.To select Audio Mode for FM RadioSelect “STEREO” or “MONO.”Press AUDIOrepeatedly in FMRadio mode.NotescdC H+VOLVOLC HSelect FM ANTENNA.1) Press toselect.2) Press toselect “INT(INTERNAL)” or“EXT (EXTERNAL)”whicheversounds the best.End setup.Press ACTION twice to exit.Select the FM number.Press aNUMBERED key(1~9) to select apreset station(see steps 2 and 3 on the previous page.)AC H+VOLVOLC HFM/TVNUMBEREDKeysAUDIOABVCR+DISPLAYModel PV-C2060 unit is shown here.Once stations are set, the selected station and current time are displayedwhen FM Radio mode is entered. To remove time, press DISPLAY.If DISPLAY is pressed, the unit status screen appears.Notes<For Model PV-C2060 only>Using FM RadioFM 1 87. 5MHz1 2 : 0 0PMSTEREOMONOFM 1 8 7. 7MHz1 2 : 0 0PM■For cable TV users ➔ “INT”■For antenna users ➔ “EXT”*Important: if the remote control POWER, CH Up/Down, NUMBERED keys, ACTION, PROG/VCR+,DISPLAY, SEARCH, R-TUNE, FM/TV, or ADD/DLT button does not work when pressed,press COMBO button on the remote and try the button again.C2060- FM TRANSMITTER(P34-37) 99.12.14, 11:32 PM35
36 For assistance, call 1-800-211-PANA(7262)1) Press to select thedesiredfrequencyrange.(93-97 or99-103MHz)2) Press to selectthe CarryFrequency.3) PressACTION to set.(Then screenin step 4 isredisplayed.)1) Press to select.2) Press to display.FM TransmitterFM Transmitter is ...a feature whereby this unit’s sound signal can be heard on yourFM Radio. First, tune your radio to a frequency (93 ~ 97, 99 ~103 MHz) that is not being broadcast on by a radio station.Then, set this unit to the same carry frequency (see below.)Now, fine-tune your radio so the sound comes in clearly.2Display MAIN MENU.Press ACTION*.1Select SET UP FM.3M A I N MENUT VVCREX I TCLOCKC HLANGUAGESET : ACT I ON KEYSELECT : KEY 1) Press to select“TV”.2) PressACTIONto display.C H+VOLVOLC HSelect SET UP FMTRANSMITTER.45RAUDIO INAUDIO INPOWERPOWERVOLVOLCHCHSTOP/EJECTSTOP/EJECTREW/REW/PLAY/REPEATPLAY/REPEATFF/FF/RECRECTIMER/FMTIMER/FMACTIONACTIONRECRECON TIMERON TIMERPROG TIMERPROG TIMERVIDEO INVIDEO INLSend WirelessAudio equipment with FM RadioFM Transmitter ON/OFFDisplay SET UP TVscreen.C H+VOLVOLC H1) Press to select.2) Press todisplay.<For Model PV-C2080 only>SELECT : KEYSET : KEYEND : ACT I ON KEY SET UP TVLOCKCAPT I ON I NPUT SELECT : TUNERV I DEO ADJUSTSET UP FMSPEAKER : ONSELECT : KEYSET : KEYEND : ACT I ON KEY SET UP FMFM ANTENNA : INTFM TRANSMITTER : ON SET UP FM TRANSMITTERSPKR W/FM TRANS : OFFEnd setupPress ACTION three times.6To Make Corrections,select frequency with CH , then repeat step 5.1Do “FM Transmitter Carry Frequency”steps 1~3. (See left.)Select SET UP FMTRANSMITTER.2C H+VOLVOLC H1) Press to select.2) Press toset “ON”or “OFF.”SELECT : KEYSET : KEYEND : ACT I ON KEY SET UP FMFM ANTENNA : INTFM TRANSMITTER FM TRANSMITTER : ON: ON SET UP FM TRANSMITTERSPKR W/FM TRANS : OFFEnd setupPress ACTION threetimes.3NotesSpeaker with FM Transmitter ON/OFF•The Carry Frequency shown by the selector bar is a guideonly. Please listen to the sound and adjust accordingly.•The unit will transmit sound when unit power is on and“FM TRANSMITTER : ON” is selected.•When unit power is turned off, “FM TRANSMITTER”returns to “OFF” setting.•Please put your FM Radio within 157 inch of the unit.•Interference occurs when you select CATV channels95, 96, or 97, while FM Transmitter is operating.•FM Transmitter will not work in FM Radio Mode.1Do “FM Transmitter Carry Frequency”steps 1~3. (See left.)2C H+VOLVOLC H1) Press to select.2) Press toset “ON”or “OFF.”End setupPress ACTION threetimes.3Select Speaker withTransmitter.SELECT : KEYSET : KEYEND : ACT I ON KEY SET UP FMFM ANTENNA : INTFM TRANSMITTER : ON SET UP FM TRANSMITTERSPKR W/FM TRANSSPKR W/FM TRANS : ON: ONIf you select...■ “ON” ➔ Internal Speaker ON with Transmitter■ “OFF” ➔ Internal Speaker MUTE with TransmitterNotes• This operation has effect only when “FM TRANSMITTER : ON” (see above.)• If “SPKR W/FM TRANS : OFF”, the MUTE and VOLUME key will not function.FM Transmitter Carry Frequency SetupWithin 157 inchSELECT : KEYSET : KEYEND : ACT I ON KEY SET UP FM TRANSMITTER93MHz 97MHz93MHz - 97MHz99MHz - 103MHzSELECT : KEYSET : KEYEND : ACT I ON KEY SET UP FM TRANSMITTER99MHz 103MHz93MHz - 97MHz99MHz - 103MHzCarry Frequency : 93 ~ 97, 99 ~ 103 MHz•When step 4 is done, FM TRANSMITTERis automatically set to “ON.”Set the Carry Frequency.• The selector bar returnsto center position whenfrequency range isswitched.C H+VOLVOLC HC H+VOLVOLC HC2060- FM TRANSMITTER(P34-37) 99.12.14, 11:32 PM36
37Advanced OperationPicture Adjustment1Display MAIN MENU.Press ACTION.Display SET UP TV screen.1) Press to select “TV.”2) Press ACTIONto display.Display VIDEO ADJUSTscreen.1) Press toselect.2) Press todisplay.Adjust desired item.1) Press toselect an item. (See below right.)2) Press toadjust.To Reset Picture Controls.Press and to selectand set “NORMAL.”All controls return to theirfactory settings.End setup.Press ACTION three timesto exit.2345Picture Adjustment■ COLOR Control Adjust color intensity.■ TINT Control Adjust for natural flesh tones.■ BRIGHTNESS ControlAdjust picture brightness.■ PICTURE ControlAdjust picture intensity by adjustingboth contrast and color level in theproper balance.■ SHARPNESS ControlAdjust picture sharpness.C H+VOLVOLC HC H+VOLVOLC HC H+VOLVOLC HVCR+ACTION1 •2 •5SET SELECT :CH UP :CH DOWN :VOL UP :VOL DOWN2 •3 •4LOCKCAPT I ON I NPUT SELECT : TUNERV I DEO ADJUSTFM ANTENNA : I NTSELECT : KEYSET : KEYEND : ACT I ON KEY SET UP TV M A I N MENUT VVCREX I TCLOCKC HLANGUAGESET : ACT I ON KEYSELECT : KEY COLORT I NTBR I GHTNESSP I CTURESHARPNESSNORMALADJUST : KEY SELECT : KEY END : ACT I ON KEYCOLORT I NTBR I GHTNESSP I CTURESHARPNESSNORNORMALALSET : KEY SELECT : KEY END : ACT I ON KEYif the remote control POWER, CH Up/Down, NUMBERED keys,ACTION, PROG/VCR+, DISPLAY, SEARCH, R-TUNE, FM/TV,or ADD/DLT button does not work when pressed, press COMBObutton on the remote and try the button again.*Important:<For Model PV-C2060 only>C H+VOLVOLC HC2060- FM TRANSMITTER(P34-37) 99.12.14, 11:32 PM37

Navigation menu