Panasonic of North America 932CQ-EX0770 Bluetooth Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	823867
Application ID	hqCwZvYsVoWjcBjBrxXTeA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	27.21kB (340073 bits)
Date Submitted	2007-07-31 00:00:00
Date Available	2008-01-27 00:00:00
Creation Date	2007-07-03 08:00:47
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2007-07-19 12:03:17
Document Title	Microsoft Word - [Draft] Installation Manual _YEP0PT9918A0_.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	14710

Installation Manual
This module is to be installed only by the professionals and used only with a Car Audio produced by
Matsushita Electric Industrial Co., Ltd. When this PCB assy with Bluetooth for car audio is installed
in the Car Audio, we shall consider the following points;
1. Since “YEP0PT9918A0”owns its FCC ID Number, we shall affix an exterior label on the
outside of the product if the FCC ID is not visible. The exterior label shall use wording such
as either ”Contains Transmitter Module FCC ID: ACJ932CQ-EX0770” or “Contains FCC
ID: ACJ932CQ-EX0770”.
2. “YEP0PT9918A0” complies with requirements of sub-sections 15.19(a)(3) in FCC Rules
Part 15 Subpart C. The manual statement (15.19 (a)(3) is included User Guide of the
product.
3. “YEP0PT9918A0” is to be installed only by the professional line operator as shown in
following pictures. (Fig 1 and 2)
Fig 1. Rear side of “YEP0PT9918A0”
Bluetooth
Module
Fig 2. Front side of “YEP0PT9918A0”
Bluetooth
Antenna
Fig 3. Top view of “YEP0PT9918A0” be equipped for a Car Audio (example)
Module
Fig 4. Enlarged view of “YEP0PT9918A0” be equipped for a Car Audio (example)
There isn’t an official user manual for this PCB assy with Bluetooth
(YEP0PT9918A0).
However, user manuals of final product which have the module, must
contain notification corresponding to the following description.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Properly shielded a grounded cables and connectors must be used for connection to
host computer and / or peripherals in order to meet FCC emission limits.
(This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.)
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of this device.
This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter.
This equipment complies with FCC/IC radiation exposure limits set forth for
uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines
in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure
rules. This equipment has very low levels of RF energy that it deemed to comply
without maximum permissive exposure evaluation (MPE). But it is desirable that it
should be installed and operated with at least 20cm and more between the radiator and
person’s body (excluding extremities: hands, wrists, feet and ankles).

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2007:07:03 08:00:47Z
Modify Date                     : 2007:07:19 12:03:17+09:00
Page Count                      : 3
Creation Date                   : 2007:07:03 08:00:47Z
Mod Date                        : 2007:07:19 12:03:17+09:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : 14710
Metadata Date                   : 2007:07:19 12:03:17+09:00
Creator                         : 14710
Title                           : Microsoft Word - [Draft] Installation Manual _YEP0PT9918A0_.doc
Has XFA                         : No

EXIF Metadata provided by EXIF.tools