Panasonic of North America 96NKX-HGC200 2.4 GHz Wireless LAN Card User Manual HGC200

Panasonic Corporation of North America 2.4 GHz Wireless LAN Card HGC200

Exhibit H User Manual

Model No. KX-HGC200PLEASE READ BEFORE USE AND SAVE.Contents:Part Names . . . . . . . . . . . . . . . . . . . . . . 3Hardware Installation . . . . . . . . . . . . . . . 4FCC and Other Information . . . . . . . . . . 6OPERATING INSTRUCTIONSPanasonic World Wide Web address: http://www.panasonic.comfor customers in the USA or Puerto Rico
– 2 –Thank you for purchasing your new Panasonic wireless card.Attach your purchase receipt here.For your future referenceSerial No. Date of purchase(found on the bottom of the unit)Name and address of dealer
– 3 –Part Names∫Part NamesKX-HGC200LINKANT.READYIndicator
– 4 –Hardware InstallationTo use the wireless network, inserting of the KX-HGC200 to the KX-HGW200and to the computer(s) is needed. The KX-HGC200 can be inserted to thePCMCIA Type IIcard slot of a computer. 1Insert the KX-HGC200 to the KX-HGW200.a:Make sure the power of the KX-HGW200 is off by checking the POWERindicator of the KX-HGW200.b:Open the cover on the front side of the KX-HGW200.c:Insert the KX-HGC200 to the card slot of the KX-HGW200 with the arrowmark on the KX-HGC200 pointing to the slot.d:Close the cover of the KX-HGW200.To remove the KX-HGC200 from the KX-HGW200, press the lever on the KX-HGW200 along with the card slot.Note:≥Be sure to insert the KX-HGC200 fully. ≥Insert on the proper direction. When you feel resistance whileinserting, turn the KX-HGC200 over and reinsert it.HomePNAWIRELESSETHERNETINTERNETPOWERKX-HGW200KX-HGC200LINKANT.READYArrow markKX-HGW200KX-HGC200Card slot
– 5 –2Insert the KX-HGC200 to the computer.a:Insert the KX-HGC200 to the PCMCIA Type IIslot of the computer withthe arrow mark on the KX-HGC200 pointing to the slot.To remove the KX-HGC200 from the computer, press the lever on the computer along with the card slot.Note:≥Be sure to insert the KX-HGC200 fully. ≥Insert on the proper direction. When you feel resistance wheninserting, turn the KX-HGC200 over and reinsert it.KX-HGC200LINKANT.READY
FCC and Other Information– 6 –This device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.CAUTION:Any changes or modifications not expressly approved by the party responsible forcompliance could void the user’s authority to operate this device.Note:This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses, and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the followingmeasures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.—Consult the dealer or an experienced radio/TV technician for help.≥Environment—do not place the unit in a room where the temperature is less than 5oC(41oF) or greater than 40oC (104oF). Allow 10 cm (4q) clearance around the unit forproper ventilation. Avoid excessive smoke, dust, mechanical vibration, shock, or directsunlight.≥Medical—consult the manufacturer of any personal medical devices, such aspacemakers, to determine if they are adequately shielded from external RF (radiofrequency) energy. (The unit operates in the frequency range of 2401MHz to 2483MHzand the power output level is 0.1 watt.) Do not use the unit in health care facilities if anyregulations posted in the area instruct you not to do so. Hospitals or health carefacilities may be using equipment that could be sensitive to external RF (radiofrequency) energy.≥Routine care—wipe the unit with a soft cloth. Do not use benzine, thinner, or anyabrasive powder.Responsible Party: Matsushita Electric Corporation of AmericaOne Panasonic Way, Secaucus, NJ 07094Tel No: 1-800-272-7033
For product service≥Panasonic Servicenters are listed in the servicenter directory.≥Call 1-800-211-PANA(7262) for the location of an authorized servicenter.≥Panasonic’s e-mail address for customer inquiries: consumerproducts@panasonic.com for customers in the USA or Puerto Rico ONLYWhen you ship the product≥Carefully pack your unit, preferably in the original carton.≥Attach a letter, detailing the symptom, to the outside of the carton.Symptom≥Send the unit to an authorized servicenter, prepaid and adequately insured.≥Do not send your unit to the Panasonic Consumer Electronics Company listedon the next page or to executive or regional sales offices. These locations donot repair consumer products.– 7 –≥This unit is designed for use in the United States of America. Sale or use of this product in other countries may violate local laws.≥Ce appareil est conçu pour être utilisé aux États-Unis d’Amérique. La vente ou l’emploi de cet appareil dans certains autres pays peut constituer une infraction à la législation locale.≥Esta unidad fue elaborada para uso en los Estados Unidos de América. La venta o el empleo de este producto en ciertos países puede constituir violación de la legislación local.
Panasonic Consumer Electronics Company,Division of Matsushita Electric Corporation of AmericaOne Panasonic Way, Secaucus, New Jersey 07094Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc.Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park Carolina, Puerto Rico 00985Printed in Japan

Navigation menu