Panasonic of North America 96NKX-HNC200 DECT 6.0 Indoor Camera User Manual Installation Manual English

Panasonic Corporation of North America DECT 6.0 Indoor Camera Installation Manual English

Users Manual

Installation GuideWireless Indoor CameraModel No. KX-HNC200Thank you for purchasing a Panasonic product.Please read this document before using the unit and save it for futurereference.For assistance, visit our Web site: http://www.panasonic.com/helpfor customers in the U.S.A. or Puerto Rico.
For your safetyTo prevent severe injury and loss of life/property, read this section carefully beforeusing the product to ensure proper and safeoperation of your product.WARNINGPower connectionRUse only the power source marked on theproduct.RDo not overload power outlets andextension cords. This can result in the riskof fire or electric shock.RCompletely insert the AC adaptor/powerplug into the power outlet. Failure to do somay cause electric shock and/or excessiveheat resulting in a fire.RRegularly remove any dust, etc. from theAC adaptor/power plug by pulling it fromthe power outlet, then wiping with a drycloth. Accumulated dust may cause aninsulation defect from moisture, etc.resulting in a fire.RUnplug the product from power outlets if itemits smoke, an abnormal smell, or makesan unusual noise. These conditions cancause fire or electric shock. Confirm thatsmoke has stopped emitting and contact usat www.panasonic.com/contactinfoRUnplug from power outlets and never touchthe inside of the product if its casing hasbeen broken open.RNever touch the plug with wet hands.Danger of electric shock exists.InstallationRDo not allow the AC adaptor cord to beexcessively pulled, bent or placed underheavy objects.RDo not connect a power cable to a terminalthat is not specified in this guide.RWhen opening holes in walls for installationor wiring, or when securing the powercable, make sure you do not damageexisting wiring and ductwork.RDo not perform any actions (such asfabricating, twisting, stretching, bundling,forcibly bending, damaging, altering,exposing to heat sources, or placing heavyobjects on the power cable) that maydamage the power cable. Using the productwith a damaged power cable may causeelectric shock, short circuits, or fire. Contactan authorized service center for repairs.RDo not mount the bracket in an unstablelocation, in a location subject to frequentvibration, on a ceiling, or on a weak wall.(Do not mount on plaster board, concreteblocks, wooden materials exposed to theoutdoors, walls with very rough surfaces, orsurfaces that are narrower than the width ofthe wall mount bracket.) There is a risk ofinjury if the product falls, or of fire or electricshock if water enters the product.Operating safeguardsRUnplug the product from power outletsbefore cleaning. Do not use liquid oraerosol cleaners.RDo not disassemble the product.RNever put metal objects inside the product.If metal objects enter the product, turn offthe circuit breaker and contact anauthorized service center.MedicalRConsult the manufacturer of any personalmedical devices, such as pacemakers orhearing aids, to determine if they areadequately shielded from external RF(radio frequency) energy. DECT featuresoperate between 1.92 GHz and 1.93 GHzwith a peak transmission power of 115 mW.Wi-Fi features operate between 2.412 GHzand 2.462 GHz with a peak transmissionpower of 100 mW.RDo not use the product in health carefacilities if any regulations posted in thearea instruct you not to do so. Hospitals orhealth care facilities may be usingequipment that could be sensitive toexternal RF energy.CAUTIONInstallation and locationRNever install wiring during an electricalstorm.RThe AC adaptor is used as the maindisconnect device. Ensure that the ACoutlet is installed near the product and iseasily accessible.Preventing accidents and injuriesRDo not put your ear(s) near the speaker, asloud sounds emitted from the speaker maycause hearing impairment.2For assistance, please visit http://www.panasonic.com/helpInstallation
Important safetyinstructionsWhen using your product, basic safetyprecautions should always be followed toreduce the risk of fire, electric shock, andinjury to persons, including the following:1. Do not use this product near water forexample, near a bathtub, washbowl,kitchen sink, or laundry tub, in a wetbasement or near a swimming pool.2. Use only the power cord indicated in thisdocument.SAVE THESE INSTRUCTIONSFor best performanceBase unit location/avoiding noiseThe base unit and other compatible Panasonicunits use radio waves to communicate witheach other.EnvironmentRKeep the product away from electrical noisegenerating devices, such as fluorescentlamps and motors.RThe product should be kept free fromexcessive smoke, dust, high temperature,and vibration.RThe product should not be exposed todirect sunlight.RDo not place heavy objects on top of theproduct.RWhen you leave the product unused for along period of time, unplug the product fromthe power outlet.RThe product should be kept away from heatsources such as heaters, kitchen stoves,etc. It should not be placed in rooms wherethe temperature is less than 0 °C (32 °F) orgreater than 40 °C (104 °F). Dampbasements should also be avoided.Routine careRWipe the outer surface of the product with asoft moist cloth.RDo not use benzine, thinner, or anyabrasive powder.Camera image qualityRCamera images may have the followingcharacteristics.– Colors in images may differ from theactual colors.– When there is light behind the subject(i.e., backlighting), faces may appeardark.– Image quality may be reduced in darklocations.– Images may appear hazy when thereare outdoor lights in use.RDistinguishing faces is difficult in thefollowing situations.– When the person is too far (over approx.9.8 ft. [3 m]) from the camera even whenthe surrounding area is bright.(Depending on the viewing angle or theconditions when images were viewed,such as when there are shadows orbacklighting, faces may not bedistinguishable even when the person iswithin 9.8 ft. [3 m] of the camera.)– In the late afternoon and at night, orother times when the surrounding area isdark. (This may reduce image quality.)– When people are moving (which causesblurring) in front of the camera.Notice:• This product is designed for use in the United States of America. Sale or use of this product in other countries may violate local laws.• Cet appareil est conçu pour être utilisé aux États-Unis d’Amérique. La vente ou l’emploi de cet appareil dans certains autres pays peut constituer une infraction à la législation locale.• Este producto está diseñado para usarse en los Estados Unidos de América.La venta o el empleo de este producto en ciertos países puede constituir violación de la legislación local.• ҁౢࠔ஑ࣁऍ୯٬ҔԶ೛Ƕऩӧځд୯ৎᎍ୧܈٬ҔǴёૈ཮ၴϸ྽ӦݤٯǶ• ࡇࡢ〇ရࡣࠊ᪥ᮏᅜእ࡛ࡢ౑⏝ࢆ┠ⓗ࡜ࡋ࡚タィࡉࢀ࡚࠾ࡾࠊ᪥ᮏᅜෆ࡛ࡢ౑⏝ࡣἲᚊ㐪཯࡜࡞ࡾࡲࡍࠋᚑࡗ࡚ࠊᙜ♫࡛ࡣ᪥ᮏᅜෆ࡟࠾࠸࡚ࡣཎ๎࡜ࡋ࡚ಟ⌮࡞࡝ࡢࢧ࣮ࣅࢫࡣ⮴ࡋ࠿ࡡࡲࡍࠋFor assistance, please visit http://www.panasonic.com/help 3Installation
FCC and otherinformationThis device complies with Part 15 of the FCCRules. Operation is subject to the followingtwo conditions:(1) This device may not cause harmfulinterference, and (2) this device must acceptany interference received, includinginterference that may cause undesiredoperation.Privacy of communications may not beensured when using this phone.CAUTION:Any changes or modifications not expresslyapproved by the party responsible forcompliance could void the user’s authority tooperate this device.NOTE:This equipment has been tested and found tocomply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules.These limits are designed to providereasonable protection against harmfulinterference in a residential installation. Thisequipment generates, uses, and can radiateradio frequency energy and, if not installedand used in accordance with the instructions,may cause harmful interference to radiocommunications. However, there is noguarantee that interference will not occur in aparticular installation. If this equipment doescause harmful interference to radio ortelevision reception, which can be determinedby turning the equipment off and on, the useris encouraged to try to correct the interferenceby one or more of the following measures:– Reorient or relocate the receiving antenna.– Increase the separation between theequipment and receiver.– Connect the equipment into an outlet on acircuit different from that to which thereceiver is connected.– Consult the dealer or an experienced radio/TV technician for help.Some cordless telephones operate atfrequencies that may cause interference tonearby TVs and VCRs. To minimize orprevent such interference, the base of thecordless telephone should not be placed nearor on top of a TV or VCR. If interference isexperienced, move the cordless telephonefurther away from the TV or VCR. This willoften reduce or eliminate interference.FCC RF Exposure Warning:RThis product complies with FCC radiationexposure limits set forth for an uncontrolledenvironment.RTo comply with FCC RF exposurerequirements, the base unit must beinstalled and operated 20 cm (8 inches) ormore between the product and all person’sbody.RThis product may not be collocated oroperated in conjunction with any otherantenna or transmitter.RFor body-worn operation, the handset mustbe used only with a non-metallic accessory.Use of other accessories may not ensurecompliance with FCC RF exposurerequirements.Notice:RFCC ID can be found inside the batterycompartment or on the bottom of the units.4For assistance, please visit http://www.panasonic.com/helpInstallation
Physical featuresAFEC DBCameraStatus lightStandSpeakerRegistration buttonDC jackConnectionsInsert the AC adaptor plug firmly into theDC jack.Secure the AC adaptor cord by wrappingaround the hook.Connect the AC adaptor to the poweroutlet.Note:RUse only the supplied Panasonic ACadaptor PNLV236.CABFor assistance, please visit http://www.panasonic.com/help 5Setup
Wall mounting1Attach the wall mount bracket to the wallusing screws (not included) appropriatefor the material of the wall.2Attach the camera stand to the wallmount bracket.3Adjust the position of the camera.SpecificationsRFrequency rangeDECT:1.92 GHz–1.93 GHzWi-Fi:2.412 GHz–2.462 GHz (channels 1–11)RPower source120 V AC, 60 HzROperating conditions-20 °C–50 °C (-4 °F–122°F)up to 90% relative air humidity(non-condensing)RTransmitting rangeApprox. 100 m (328 feet) (line-of-sightdistance from the base unit)RImage sensor0.3· megapixel CMOSRMinimum illuminance required1 lx*1RFocal lengthFixed, 0.4 m (1.3 feet)–infinity)RAngular field of view (camera angle)Horizontal: approx. 70°Vertical: approx. 53°RSensor detection methodPyroelectric infrared sensor (heat sensor)and motion detectionRHeat sensor detection range*2Horizontal: approx. 63°Vertical: approx. 20°Distance: approx. 5 m (16.4 feet)RMotion detection sensor detection rangeHorizontal: approx. 53°Vertical: approx. 41°RLighting method2 white LED lights*3RAdjustable mounting angles*4Horizontal: ±90°Vertical: facing forward - facing downapprox. 60°RHeat sensor adjustable anglesManually adjustable to 2 angles*1 The minimum illuminance required whenthe camera’s [Brightness] setting is set to[+3].*2 When the surrounding temperature isapprox. 20 °C (68 °F).*3 Approx. 8.5 lx when 3 m (9.8 feet) in frontof the camera, and approx. 4 lx when 3 m(9.8 feet) away and 20° to the left or rightof the camera.*4 Adjustable when mounting.6For assistance, please visit http://www.panasonic.com/helpSetup
Two Riverfront Plaza, Newark, NJ 07102-5490© Panasonic System Networks Co., Ltd. 2014Printed in China

Navigation menu